Infinix ZERO BOOK 13 has a 2+2 speaker system which isn't probed correctly.
This patch adds a quirk with the proper pin connections.
Also The mic in this laptop suffers too high gain resulting in mostly
fan noise being recorded,
This patch Also limit mic boost.
HW Probe for device; https://linux-hardware.org/?probe=a2e892c47b
Test: All 4 speaker works, Mic has low noise.
Signed-off-by: Piyush Raj Chouhan <piyushchouhan1598@gmail.com>
Link: https://patch.msgid.link/20241028155516.15552-1-piyuschouhan1598@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Old procedure has a chance to meet Headphone no output.
Fixes: c2d6af53a4 ("ALSA: hda/realtek - Add default procedure for suspend and resume state")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/17b717a0a0b04a77aea4a8ec820cba13@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the kconfig option for the tas2781 HDA driver to select CRC32 rather
than CRC32_SARWATE. CRC32_SARWATE is an option from the kconfig
'choice' that selects the specific CRC32 implementation. Selecting a
'choice' option seems to have no effect, but even if it did work, it
would be incorrect for a random driver to override the user's choice.
CRC32 is the correct option to select for crc32() to be available.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20241020175624.7095-1-ebiggers@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer Predator G9-593 has a 2+1 speaker system which isn't probed
correctly.
This patch adds a quirk with the proper pin connections.
Note that I do not own this laptop, so I cannot guarantee that this
fixes the issue.
Testing was done by other users here:
https://discussion.fedoraproject.org/t/-/118482
This model appears to have two different dev IDs...
- 0x1177 (as seen on the forum link above)
- 0x1178 (as seen on https://linux-hardware.org/?probe=127df9999f)
I don't think the audio system was changed between model revisions, so
the patch applies for both IDs.
Signed-off-by: José Relvas <josemonsantorelvas@gmail.com>
Link: https://patch.msgid.link/20241020102756.225258-1-josemonsantorelvas@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cached version avoids redundant commands to the codec, improving
stability and reducing unnecessary operations. This change ensures
better power management and reliable restoration of pin configurations,
especially after hibernation (S4) and other power transitions.
Fixes: 9988844c45 ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2")
Suggested-by: Kai-Heng Feng <kaihengf@nvidia.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then
NULL pointer dereference will occur in the next line.
Since dolphin_fixups function is a hda_fixup function which is not supposed
to return any errors, add simple check before dereference, ignore the fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 20e5077241 ("ALSA: hda/cs8409: Add support for dolphin")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://patch.msgid.link/20241010221649.1305-1-m.masimov@maxima.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.
However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:
working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP
This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Included solution with ALC287/CS35L41 did not cover full function, 14
inch code blocked. Forcing output for treble/bass speaker to connection
0x02, setting pin configs for LEDs and re-powering amp and calling
fixups for cs35l41, mute and gpio leds was a working combination to reach
correct behaviour.
Signed-off-by: christoph.plattner <christoph.plattner@gmx.at>
Link: https://patch.msgid.link/20241005173509.1196001-1-christoph.plattner@gmx.at
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec.
-----BEGIN PGP SIGNATURE-----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=RpGO
-----END PGP SIGNATURE-----
Merge tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
We received a regression report for System76 Pangolin (pang14) due to
the recent fix for Tuxedo Sirius devices to support the top speaker.
The reason was the conflicting PCI SSID, as often seen.
As a workaround, now the codec SSID is checked and the quirk is
applied conditionally only to Sirius devices.
Fixes: 4178d78cd7 ("ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices")
Reported-by: Christian Heusel <christian@heusel.eu>
Reported-by: Jerry <jerryluo225@gmail.com>
Closes: https://lore.kernel.org/c930b6a6-64e5-498f-b65a-1cd5e0a1d733@heusel.eu
Link: https://patch.msgid.link/20241004082602.29016-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmb9kbIACgkQJNaLcl1U
h9DoEAf/YFyHf5UchliSj11taVVDxzIZznDVfJdhxw6Iktj7b7SinUNRvGfixXyV
ELbRDP291/Cx0AuoRTbj+wZpO687uLVdTAUfX9OEXIOku0kRCA0XZOyAe+tgtKgr
rCIaj9sCn6CxYWBw4VBDcP4tgvh2igcYKeO2bUvvukHdTJBYTiUxrcJCkVDBQr4t
bzvdlalukcop3yMPZbf41CGf7T0tfh8KkJaNbdnhQLoKD3rekYsShZYmH1wRmCQc
fnwWuOgoREIilPLbae7fhdFmH1EscIt4iZcq8j+tl1Kvj1zKabU0We4Rx2rfWZ/Y
pd+YwxRnrXNI2+hUG6nXAVtYjPRa/A==
=KM7g
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
This reverts commit 478689b599.
The fix seems leading to regressions for other systems.
Also, the way to check the presence of IOMMU via get_dma_ops() isn't
reliable and it's no longer applicable for 6.12. After all, it's no
right fix, so let's revert it at first.
To be noted, the PCM buffer allocation has been changed to try the
continuous pages at first since 6.12, so the problem could be already
addressed without this hackish workaround.
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Closes: https://lore.kernel.org/ZvgCdYfKgwHpJXGE@eldamar.lan
Link: https://patch.msgid.link/20241002155948.4859-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the trigger_tstamp_latched flag is set, the PCM core code assumes that
the low-level driver handles the trigger timestamping itself. Ensure that
runtime->trigger_tstamp is always updated.
Buglink: https://github.com/alsa-project/alsa-lib/issues/387
Reported-by: Zeno Endemann <zeno.endemann@mailbox.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241002081306.1788405-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we evaluate directly with preferred_dacs table, the flag is no
longer used and merely a placeholder.
Let's drop the definition and its users.
Link: https://patch.msgid.link/20241001121439.26060-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some time ago, we introduced the obey_preferred_dacs flag for choosing
the DAC/pin pairs specified by the driver instead of parsing the
paths. This works as expected, per se, but there have been a few
cases where we forgot to set this flag while preferred_dacs table is
already set up. It ended up with incorrect wiring and made us
wondering why it doesn't work.
Basically, when the preferred_dacs table is provided, it means that
the driver really wants to wire up to follow that. That is, the
presence of the preferred_dacs table itself is already a "do-it"
flag.
In this patch, we simply replace the evaluation of obey_preferred_dacs
flag with the presence of preferred_dacs table for fixing the
misbehavior. Another patch to drop of the obsoleted flag will
follow.
Fixes: 242d990c15 ("ALSA: hda/generic: Add option to enforce preferred_dacs pairs")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219803
Link: https://patch.msgid.link/20241001121439.26060-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://patch.msgid.link/20240930112121.95324-5-Julia.Lawall@inria.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The headset push button cannot work properly in case of the ALC257.
This patch reverted the previous commit to correct the side effect.
Fixes: ef9718b3d5 ("ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7")
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/20240930105039.3473266-1-oder_chiou@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=L3s9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240920151009.499188-2-u.kleine-koenig@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Elite mt645 G8 Mobile Thin Client uses an ALC236 codec
and needs the ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk
to enable the mute and micmute LED functionality.
This patch adds the system ID of the HP Elite mt645 G8
to the `alc269_fixup_tbl` in `patch_realtek.c`
to enable the required quirk.
Cc: stable@vger.kernel.org
Signed-off-by: Nikolai Afanasenkov <nikolai.afanasenkov@hp.com>
Link: https://patch.msgid.link/20240916195042.4050-1-nikolai.afanasenkov@hp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbko34ACgkQJNaLcl1U
h9CQiwf9HseC6VkNQ0ISVZ2UsSf8K/HsHsdBGl7/CRr0SEvS3pszYMkKPbhRggsF
aQ4nfitXeN7Vo6S0tNXx63wzjpMPkjrHdV0XY+WJxfuCaeb3DHFEJ4uvlgv53aoh
M+wz1aldvKWjDPwhkzcJEaneQ36U7OlUSBsbFHR82dBDguEm+h29tAxTuLlwL5Zb
M8NuSfbh0cfY9Kk1cPGsqaHD8wjUeg6/Q5qnbDg2kAm0aF1fAxfyFKRX6Z5s9ekd
LeU3EIdRbI8UlHv7Afl0UKDYtYqL1ubwmjDb45HnsE4FmNEmDEbf8c1adRumZAjm
Js9yzswiaaHAvotCaEstFC6HYUL+oQ==
=jugn
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
The CM9825 is a High Definition Audio Codec.
There are 2 independent stereo outputs, one of the stereo
outputs is cap-less with HP AMP, and the other is line out to
connect the active speaker. The inputs can be Line-in and MIC-in.
Signed-off-by: Leo Tsai <antivirus621@gmail.com>
Link: https://patch.msgid.link/20240910065542.6534-1-antivirus621@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I have done a lot of analysis for these type of devices and collaborated
quite a bit with Nick Weihs (author of the first patch submitted for this
including adding samsung_helper.c). More information can be found in the
issue on Github [1] including additional rationale and testing.
The existing implementation includes a large number of equalizer coef
values that are not necessary to actually init and enable the speaker
amps, as well as create a somewhat worse sound profile. Users have
reported "muffled" or "muddy" sound; more information about this including
my analysis of the differences can be found in the linked Github issue.
This patch refactors the "v2" version of ALC298_FIXUP_SAMSUNG_AMP to a much
simpler implementation which removes the new samsung_helper.c, reuses more
of the existing patch_realtek.c, and sends significantly fewer unnecessary
coef values (including removing all of these EQ-specific coef values).
A pcm_playback_hook is used to dynamically enable and disable the speaker
amps only when there will be audio playback; this is to match the behavior
of how the driver for these devices is working in Windows, and is
suspected but not yet tested or confirmed to help with power consumption.
Support for models with 2 speaker amps vs 4 speaker amps is controlled by
a specific quirk name for both types. A new int num_speaker_amps has been
added to alc_spec so that the hooks can know how many speaker amps to
enable or disable. This design was chosen to limit the number of places
that subsystem ids will need to be maintained: like this, they can be
maintained only once in the quirk table and there will not be another
separate list of subsystem ids to maintain elsewhere in the code.
Also updated the quirk name from ALC298_FIXUP_SAMSUNG_AMP2 to
ALC298_FIXUP_SAMSUNG_AMP_V2_.. as this is not a quirk for "Amp #2" on
ALC298 but is instead a different version of how to handle it.
More devices have been added (see Github issue for testing confirmation),
as well as a small cleanup to existing names.
[1]: https://github.com/thesofproject/linux/issues/4055#issuecomment-2323411911
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Link: https://patch.msgid.link/20240909193000.838815-1-josh@joshuagrisham.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Vaio VJFH52 is equipped with ACL256, and needs a
fix to make the internal mic and headphone mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20240909162751.4790-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The azx_bus->dma_type is referred only for allocating the
communication buffers like CORB/RIRB, and the allocation size is
small. Hence it doesn't have to be S/G buffer allocation, which is an
obvious overkill. Use the standard SNDRV_DMA_TYPE_DEV_WC instead.
This was changed to SNDRV_DMA_TYPE_DEV_WC_SG in the commit
37137ec26c ("ALSA: hda: Once again fix regression of page
allocations with IOMMU") as a workaround for IOMMU-backed
allocations. But this is no longer needed since the allocation with
SNDRV_DMA_TYPE_DEV_WC itself was fixed in the commit 9c27301342
("ALSA: memalloc: Use DMA API for x86 WC page allocations, too").
So this patch reverts the previous workaround in this piece of code.
Link: https://patch.msgid.link/20240909134744.25426-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-5-8371948d3921@baylibre.com
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-4-8371948d3921@baylibre.com
The custom rate constraint lists were necessary to support 12kHz and 24kHz.
These rates are now available through SNDRV_PCM_RATE_12000 and
SNDRV_PCM_RATE_24000.
Use them and drop the custom rate constraint rules.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-3-8371948d3921@baylibre.com
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-2-8371948d3921@baylibre.com
When the headset is connected, there is no automatic switching of the
capture source - you can only manually select the headset microphone
in pavucontrol.
This patch fixes/activates the inactive microphone of the headset.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240905140211.937385-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute LED on this HP laptop uses ALC236 and requires a quirk to function. This patch enables the existing quirk for the device.
Signed-off-by: Maximilien Perreault <maximilienperreault@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240904031013.21220-1-maximilienperreault@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute led is controlled by ALC245. This patch enables the already
existing quirk for this device.
Signed-off-by: Adam Queler <queler+k@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903202419.31433-1-queler+k@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mic in those laptops suffers too high gain resulting in mostly (fan
or else) noise being recorded. In addition to the existing fixup about
mic detection, apply also limiting its boost. While at it, extend the
quirk to also V5[46]0TNE models, which have the same issue.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903124939.6213-1-marmarek@invisiblethingslab.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo V145 is having phase inverted dmic but simply applying inverted
dmic fixups does not work. Chaining up verb fixes for ALC283 enables
inverting dmic fixup to work properly.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240830-lenovo-v145-fixes-v3-1-f7b7265068fa@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We do not need model specific HDA quirks to construct the component
binding details of Cirrus Logic companion amplifiers as this information
is already present in the ACPI.
Quirks are then only required for special workarounds not described in
the ACPI such as internal configuration of the Realtek codecs.
The codec pointer is now initialized in hda_component_manager_init() so
that we can detect when companion amplifiers are found in the ACPI but
the SSID invokes a quirk that also attempts to create the component
binding.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240829161114.140938-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
