- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----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=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are farily small maintenance
changes, either addressing minor mistakes or enabling additional hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and a
"shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a platform
driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some
code refactoring and new features.
-----BEGIN PGP SIGNATURE-----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=ChcR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
As most of the drivers that depend on ARCH_LAYERSCAPE, make FSL_DPAA
depend on COMPILE_TEST for compilation and testing.
# grep -r depends.\*ARCH_LAYERSCAPE.\*COMPILE_TEST | wc -l
29
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c809 ("net: ethtool: Fix RSS setting")
eac9122f0c ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`sunxi_sram_regmap_config` is not modified and can be declared as const
to move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240705-sunxi-sram-const-regmap_config-v1-1-1b997cd65d0f@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
This adds a quirk to skip using the newly introduced SHM Bridge
implementation while regressions are being investigated.
One occurance of return no_free_ptr() is replaced with return_ptr() to
make code easier to read. llcc, mdt_loader, ocmem, pdr, socinfo and
wcnss drivers gets simplified using cleanup.h.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaNik4VHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FgKcQAMDBclsQBIRkAkPl6BnqNG2aoEVX
VYI1W4IwqFutfVAH/0lpBX1jzj1QfHh7b7+9eB3q92+Zpi/wHW1hjUbWujFMuExt
hoC+ZYc5Ciyikfii1nYCyXAjD7VIWZD6nFo0qgyYhpgEVIaq0cqBpCIAH0doUBYa
WPEuxzxClgM0S2aHmlCforfYPGaRyQL+ZCW/ksrIgLsynJivp7VVQ6FlnfrjaLo2
Yv7BqA7ydhcBFdlST20sSXBLqWksBbZokRN6ObqC8Z9MQ/Lux6ZV+CKO56OoZZTq
vvUyl9fkaRcFr+l+6kLYsSYRRyNkw7fBy0fZhPOubdI3NCzOaOPk0nCHyrnFiXER
vAzJazmD0+kOudc3YUFN1fNLpUyCUBZ2PWRF4GVn9SG0Yq3D/+MCfdob9bqREMBu
8yaSdI0sr/G1yo3HPvReamaaYvefUn0KmiU5MqSiZJqDal3E1uLMxwTCp/0K5B/k
xSOx0dxTewO2muHYZHllcey0Y7sJ+btNbZHgIBQTqzXD/5qkW4dx2tmhwwIPZsHl
RwtlC8eE2UEsAL1f9l+vnFpu5+hVUmRO/L10D6tvZWA+h/hvDtJXGnGhMrZxXXba
syg15AaAZIoNLPtUsoDul39pM3iXERN7Ht/aEb44UzOQvRNJISH2p+UMy1mv+xWW
9ef3aGiq4sBmzGpz
=1rmh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaNopEACgkQYKtH/8kJ
UieLxRAAqo2JxPyJlRk6bPCaANm2yCHvstK6TkikVamUqDWMBm0pMi+SzBEWJGpy
OC9+iprwsHXclfo79lXSWKosc3leIy5HkLErWAaM42QSJpeUb5EtVsvjAFqcZp02
Eq1GpmMujaZmOuIYhccfPimu7aBw6ajpwDVVPe4aupc5GOXAzQFEb1bFaw7jvz0T
gcpkVuP4UM89osbgbxHVs3l/8m8zxtJSX6mG43alBWBq9dvlzaPTZtDFyxjXCYtS
+bYYf99BixpLnqrr/zgczGudvj+8mUyUoyAUqeyEas5je0lTOkhIUGUiHRyi9wmo
Z3IxvYqh4Xv/GyppdPNhkNKY4SVumtM40WcxheBKPvuhZMzbAZCiGyVaAz/QE34f
zjiKPJ91imutu4YyQLzJiYyFr4znNCsh3QMkhRCa9X6IqYmEOpB0PlU9ftjZ7ScE
pFzkEkSXgTRHYbsKaiQp0iBXYzV03mPPNqUb4NkDCllDw8llavsSX5xcoh0pgppp
dZC1HYhDVnUCq/CJJBJOLchCuOoMmsD6HmKsnQyyQdLqGEfMn4l/g9fANdQxYZDL
sX7vkDQlH4ptkiBbPzhsu0BLUk36POUGGc1yMxcBDKEEABhPl0fvc5zAnE03ZNkl
RK0puEWhyKHuQBBFL4CqT4G7VFrwSWyLzMIG51KyEedS4rleMc8=
=uvSl
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.11
This adds a quirk to skip using the newly introduced SHM Bridge
implementation while regressions are being investigated.
One occurance of return no_free_ptr() is replaced with return_ptr() to
make code easier to read. llcc, mdt_loader, ocmem, pdr, socinfo and
wcnss drivers gets simplified using cleanup.h.
* tag 'qcom-drivers-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
Link: https://lore.kernel.org/r/20240709191246.3053-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Not all registers in PMU_ALIVE block support atomic set/clear operations.
GS101_SYSIP_DAT0 and GS101_SYSTEM_CONFIGURATION registers are two regs
where attempting atomic access fails.
As documentation on exactly which registers support atomic operations is
not forthcoming. We default to atomic access, unless the register is
explicitly added to the tensor_is_atomic() function. Update the comment
to reflect this as well.
Reviewed-by: Will McVicker <willmcvicker@google.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240628223506.1237523-4-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702063514.6215-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
-----BEGIN PGP SIGNATURE-----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=Eknv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lPdX
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.11
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
* tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
soc: qcom: smp2p: Use devname for interrupt descriptions
soc: qcom: smsm: Add missing mailbox dependency to Kconfig
soc: qcom: add missing pd-mapper dependencies
soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
soc: qcom: add pd-mapper implementation
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: protect locator_addr with the main mutex
firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
firmware: qcom: scm: add support for SHM bridge memory carveout
firmware: qcom: tzmem: enable SHM Bridge support
firmware: qcom: scm: add support for SHM bridge operations
firmware: qcom: qseecom: convert to using the TZ allocator
firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
...
Link: https://lore.kernel.org/r/20240705034410.13968-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a simple change that condenses two function calls into one in
two places to save some boilerplate.
-----BEGIN PGP SIGNATURE-----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=c6cF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5chF
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.11-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.11-rc1
This is a simple change that condenses two function calls into one in
two places to save some boilerplate.
* tag 'tegra-for-6.11-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Simplify resource lookup
Link: https://lore.kernel.org/r/20240628210818.3627404-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UCSI support is disabled on SC8280XP while being debugged, as it's
causing the system to crash. A recent LLCC QDU1000 binding change is
reverted, to allow expressing the LLCC memory regions.
-----BEGIN PGP SIGNATURE-----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=NpMV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AHIN
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.10
UCSI support is disabled on SC8280XP while being debugged, as it's
causing the system to crash. A recent LLCC QDU1000 binding change is
reverted, to allow expressing the LLCC memory regions.
* tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
soc: qcom: pmic_glink: disable UCSI on sc8280xp
Link: https://lore.kernel.org/r/20240702031157.341031-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-thermal-const-v1-5-6e59e139c65d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-thermal-const-v1-4-6e59e139c65d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-thermal-const-v1-3-6e59e139c65d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
No function in the QMC API is available to get the number of phandles
present in a phandle list.
Fill this lack introducing qmc_chan_count_phandles().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20240701113038.55144-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
qmc_chan_get_byphandle() and the resource managed version retrieve a
channel from a simple phandle.
Extend the API and introduce qmc_chan_get_byphandles_index() and the
resource managed version in order to retrieve a channel from a phandle
list using the provided index to identify the phandle in the list.
Also update qmc_chan_get_byphandle() and the resource managed version to
use qmc_chan_get_byphandles_index() and so avoid code duplication.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20240701113038.55144-8-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using /proc/interrupts to collect statistics on smp2p interrupt
counts, it is hard to distinguish the different instances of smp2p from
each other. For example to debug a processor boot issue, the ready and
handover interrupts are checked for sanity to ensure the firmware
reached a specific initialization stage.
Remove "smp2p" string from the irq request so that the irq will default
to the device name. Add an .irq_print_chip() callback to print the irq
chip name as the device name. These two changes allow for a unique name
to be used in /proc/interrupts as shown below.
/ # cat /proc/interrupts | grep smp2p
18: ... ipcc 196610 Edge smp2p-adsp
20: ... ipcc 131074 Edge smp2p-modem
170: ... smp2p-modem 1 Edge q6v5 ready
178: ... smp2p-adsp 1 Edge q6v5 ready
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240627104831.4176799-2-quic_sudeepgo@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The pd-mapper driver uses auxiliary bus and Qualcomm PDR message format
data. Add missing dependencies to the driver's Kconfig entry.
Reported-by: Mark Brown <broonie@kernel.org>
Fixes: 1ebcde047c ("soc: qcom: add pd-mapper implementation")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240626-qcom-pd-mapper-fix-deps-v1-1-644678dc4663@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This adds the previously missed Tone Curve Conversion (TCC)
MuteX bit to enable the same in MDP3 on the the MT8188 SoC,
disables 9-bit Alpha for display HDR support in MT8195 and
adds math operation support in the Global Command Engine for
all MediaTek SoCs, which will be used in the near future in
the ISP driver.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZn5/kygcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4ct0BAN+y
Bf99G+Dz2bDJOZWV5waVqatekpHhsFO0+2xgzIjRAP9Ljhbp2OjiosfYHkJWMS54
2IKKuUz/IKqxJFWydLzsCw==
=2Ckw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Fo/W
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.11
This adds the previously missed Tone Curve Conversion (TCC)
MuteX bit to enable the same in MDP3 on the the MT8188 SoC,
disables 9-bit Alpha for display HDR support in MT8195 and
adds math operation support in the Global Command Engine for
all MediaTek SoCs, which will be used in the near future in
the ISP driver.
* tag 'mtk-soc-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mtk-cmdq: Add cmdq_pkt_logic_command to support math operation
soc: mediatek: Disable 9-bit alpha in ETHDR
soc: mediatek: mtk-mutex: Add MDP_TCC0 mod to MT8188 mutex table
Link: https://lore.kernel.org/r/20240628093801.126013-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
'struct knav_range_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
7498 1193 0 8691 21f3 drivers/soc/ti/knav_qmss_acc.o
After:
=====
text data bss dec hex filename
7566 1145 0 8711 2207 drivers/soc/ti/knav_qmss_acc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a8b4b428f97fc584f38bf45100aa9da241aeb935.1719159074.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Nishanth Menon <nm@ti.com>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/imx/soc-imx8m.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-qmgr.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-npe.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/mediatek/mtk-cmdq-helper.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/amlogic/meson-clk-measure.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for amlogic/meson-clk-measure.c
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240625-md-drivers-soc-v2-1-8bc7c03e3e69@quicinc.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
As a minor optimization, this also lets us drop of_match_ptr() and
ifdef-guarding, as we now know what they will resolve to, we might as
well save cpp some work.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20240617133004.59887629@endymion.delvare
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add cmdq_pkt_logic_command to support math operation.
cmdq_pkt_logic_command can append logic command to the CMDQ packet,
ask GCE to execute a arithmetic calculate instruction,
such as add, subtract, multiply, AND, OR and NOT, etc.
Note that all arithmetic instructions are unsigned calculations.
If there are any overflows, GCE will sent the invalid IRQ to notify
CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://lore.kernel.org/r/20240625083957.3540-1-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
When 9-bit alpha is enabled, its value will be converted from 0-255 to
0-256 (255 = not defined). This is designed for special HDR related
calculation, which should be disabled by default, otherwise, alpha
blending will not work correctly.
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620-9bit_alpha-v1-1-13c69daaf29f@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8188's MDP3 is able to use MDP_TCC0, this mutex_mod bit does
actually exist and it's the same as MT8195: add it to the table.
Fixes: 26bb17dae6 ("soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS")
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20240619103034.110377-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Commit 6f4429e21a ("soc/tegra: pmc: Update address mapping sequence
for PMC apertures") updated the resource lookup code in the PMC driver.
Instead of calling platform_get_resource_byname() and
devm_ioremap_resource() simplify the code by simply calling
devm_platform_ioremap_resource_byname().
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For SoCs like gs101 that need a special regmap, register this with
of_syscon_register_regmap api, so it can be returned by
syscon_regmap_lookup_by_phandle() and friends.
For SoCs that don't require a custom regmap, revert back to syscon
creating the mmio regmap rather than duplicating the logic here.
exynos_get_pmu_regmap_by_phandle() api is also updated to retrieve
the regmap via syscon. The exynos_get_pmu_regmap_by_phandle() api
is kept around until fw_devlink support for syscon property is added
for the pinctrl-samsung driver that also runs at postcore_initcall
level.
All other exynos client drivers can revert back to
syscon_regmap_lookup_by_phandle().
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240621115544.1655458-3-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The multiple BWMONv4 instances available on the X1E80100 SoC use the
same interrupt number. Mark them are shared to allow for re-use across
instances.
Using IRQF_SHARED coupled with devm_request_threaded_irq implies that
the irq can still trigger during/after bwmon_remove due to other active
bwmon instances. Handle this race by relying on bwmon_disable to disable
the interrupt and coupled with explicit request/free irqs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240624092214.146935-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DIMLIB's capabilities are supplied by the dim, net_dim, and
rdma_dim objects, and dim's interfaces solely act as a base for
net_dim and rdma_dim and are not explicitly used anywhere else.
rdma_dim is utilized by the infiniband driver, while net_dim
is for network devices, excluding the soc/fsl driver.
In this patch, net_dim relies on some NET's interfaces, thus
DIMLIB needs to explicitly depend on the NET Kconfig.
The soc/fsl driver uses the functions provided by net_dim, so
it also needs to depend on NET.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-3-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Existing userspace protection domain mapper implementation has several
issue. It doesn't play well with CONFIG_EXTRA_FIRMWARE, it doesn't
reread JSON files if firmware location is changed (or if firmware was
not available at the time pd-mapper was started but the corresponding
directory is mounted later), etc.
Provide in-kernel service implementing protection domain mapping
required to work with several services, which are provided by the DSP
firmware.
This module is loaded automatically by the remoteproc drivers when
necessary via the symbol dependency. It uses a root node to match a
protection domains map for a particular board. It is not possible to
implement it as a 'driver' as there is no corresponding device.
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-4-a84ee3591c8e@linaro.org
[bjorn: include linux/slab.h]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The in-kernel PD mapper is going to use same message structures as the
QCOM_PDR_HELPERS module. Extract message marshalling data to separate
module that can be used by both PDR helpers and by PD mapper.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-3-a84ee3591c8e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
While parsing the domains list, start offsets from 0 rather than from
domains_read. The domains_read is equal to the total count of the
domains we have seen, while the domains list in the message starts from
offset 0.
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-2-a84ee3591c8e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If the service locator server is restarted fast enough, the PDR can
rewrite locator_addr fields concurrently. Protect them by placing
modification of those fields under the main pdr->lock.
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-1-a84ee3591c8e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Recent (SM8550+ ish) Qualcomm SoCs have a new mechanism for precisely
identifying the specific SKU and the precise speed bin (in the general
meaning of this word, anyway): a pair of values called Product Code
and Feature Code.
Based on this information, we can deduce the available frequencies for
things such as Adreno. In the case of Adreno specifically, Pcode is
useless for non-prototype SoCs.
Introduce a getter for the feature code and export it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-smem_speedbin-v2-2-8989d7e3d176@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In preparation for parsing the chip "feature code" (FC) and "product
code" (PC) (essentially the parameters that let us conclusively
characterize the sillicon we're running on, including various speed
bins), move the socinfo version defines to the public header.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-smem_speedbin-v2-1-8989d7e3d176@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disconnecting an external display triggers a hypervisor reset on the
Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again
until the regression has been fixed properly.
Fixes: 3f91a0bf4a ("soc: qcom: pmic_glink: reenable UCSI on sc8280xp")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240608114529.23060-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for using the mbox interface instead of manually writing to
the syscon. With this change the driver will attempt to get the mailbox
first, and if that fails it will fall back to the existing way of using
qcom,ipc-* properties and converting to syscon.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240606-smsm-mbox-v2-2-8abe6b5f01da@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GCC 14.1 complains about the argument usage of kmemdup_array():
drivers/soc/tegra/fuse/fuse-tegra.c:130:65: error: 'kmemdup_array' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
130 | fuse->lookups = kmemdup_array(fuse->soc->lookups, sizeof(*fuse->lookups),
| ^
drivers/soc/tegra/fuse/fuse-tegra.c:130:65: note: earlier argument should specify number of elements, later size of each element
The annotation introduced by commit 7d78a77733 ("string: Add
additional __realloc_size() annotations for "dup" helpers") lets the
compiler think that kmemdup_array() follows the same format as calloc(),
with the number of elements preceding the size of one element. So we
could simply swap the arguments to __realloc_size() to get rid of that
warning, but it seems cleaner to instead have kmemdup_array() follow the
same format as krealloc_array(), memdup_array_user(), calloc() etc.
Fixes: 7d78a77733 ("string: Add additional __realloc_size() annotations for "dup" helpers")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240606144608.97817-2-jean-philippe@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
Add the S905L SoC ID observed in several P271 boards:
kernel: soc soc0: Amlogic Meson GXLX (S905L) Revision 26:a (c1:2) Detected
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604050752.3312468-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
make allmodconfig && make W=1 C=1 warns:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/qcom/spm.o
Add the missing MODULE_DESCRIPTION(), using the same description as
the underlying QCOM_SPM Kconfig item.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240603-md-soc-qcom-spm-v1-1-617730f08d22@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently return status is not getting checked for get_api_version
and because of that for x86 arch we are getting below smatch error.
CC drivers/soc/xilinx/zynqmp_power.o
drivers/soc/xilinx/zynqmp_power.c: In function 'zynqmp_pm_probe':
drivers/soc/xilinx/zynqmp_power.c:295:12: warning: 'pm_api_version' is
used uninitialized [-Wuninitialized]
295 | if (pm_api_version < ZYNQMP_PM_VERSION)
| ^
CHECK drivers/soc/xilinx/zynqmp_power.c
drivers/soc/xilinx/zynqmp_power.c:295 zynqmp_pm_probe() error:
uninitialized symbol 'pm_api_version'.
So, check return status of pm_get_api_version and return error in case
of failure to avoid checking uninitialized pm_api_version variable.
Fixes: b9b3a8be28 ("firmware: xilinx: Remove eemi ops for get_api_version")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240515112345.24673-1-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Move FIRMWARE_VERSION_MASK macro to xlnx-zynqmp.h so that other
drivers can use it for verifying the supported firmware version.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240425095913.919390-1-ronak.jain@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add support to register subsystem restart events from firmware for Versal
and Versal NET platforms. This event is received when firmware requests
for subsystem restart. After receiving this event, the kernel needs to be
restarted.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20240424124900.29287-1-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The per cpu variable cpu_number1 is passed to xlnx_event_handler as
argument "dev_id", but it is not used in this function. So drop the
initialization of this variable and rename it to dummy_cpu_number.
This patch is to fix the following call trace when the kernel option
CONFIG_DEBUG_ATOMIC_SLEEP is enabled:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53
Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT)
Call trace:
dump_backtrace+0xd0/0xe0
show_stack+0x18/0x40
dump_stack_lvl+0x7c/0xa0
dump_stack+0x18/0x34
__might_resched+0x10c/0x140
__might_sleep+0x4c/0xa0
__kmem_cache_alloc_node+0xf4/0x168
kmalloc_trace+0x28/0x38
__request_percpu_irq+0x74/0x138
xlnx_event_manager_probe+0xf8/0x298
platform_probe+0x68/0xd8
Fixes: daed80ed07 ("soc: xilinx: Fix for call trace due to the usage of smp_processor_id()")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20240408110610.15676-1-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Until SM8450, there was only one broadcast region (Broadcast_OR)
used to broadcast write and check for status bit 0.
>From SM8450 onwards another broadcast region (Broadcast_AND) has been
added which checks for status bit 1. This hasn't been updated and
Broadcast_OR region was wrongly being used to check for status bit 1 all
along.
Hence define new regmap structure for Broadcast_AND region and initialize
this regmap when HW block version is greater than 4.1, otherwise
initialize as a NULL pointer for backwards compatibility.
Switch from broadcast_OR to broadcast_AND region (when defined in DT)
for checking status bit 1 as Broadcast_OR region checks only for bit 0.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/9cf19928a67eaa577ae0f02de5bf86276be34ea2.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add qcom_smem_bust_hwspin_lock_by_host to enable remoteproc to bust the
hwspin_lock owned by smem. In the event the remoteproc crashes
unexpectedly, the remoteproc driver can invoke this API to try and bust
the hwspin_lock and release the lock if still held by the remoteproc
device.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-3-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is support for SDM670 already, but not recognized by the socinfo
driver. Add the table entry so SDM670 can be found in sysfs.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240524012023.318965-7-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The list 'claimed_sram' seems unused, as far as I can tell it always
has been.
I think the 'list' member of sunxi_sram_data was intended to be
used when it was on that list.
Remove them.
Build tested only.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240504204401.198913-1-linux@treblig.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the SoC ID for IPQ5321, which belong to the family of IPQ5332 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240325-ipq5321-sku-support-v2-2-f30ce244732f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dan pointed out that Smatch is concerned about this code because it uses
spin_lock_irqsave() and then calls wait_event_lock_irq() which enables
irqs before going to sleep. The comment above the function says it
should be called with interrupts enabled, but we simply hope that's true
without really confirming that. Let's add a might_sleep() here to
confirm that interrupts and preemption aren't disabled. Once we do that,
we can change the lock to be non-saving, spin_lock_irq(), to clarify
that we don't expect irqs to be disabled. If irqs are disabled by
callers they're going to be enabled anyway in the wait_event_lock_irq()
call which would be bad.
This should make Smatch happier and find bad callers faster with the
might_sleep(). We can drop the WARN_ON() in the caller because we have
the might_sleep() now, simplifying the code.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/911181ed-c430-4592-ad26-4dc948834e08@moroto.mountain
Fixes: 2bc20f3c84 ("soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free")
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240509184129.3924422-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As platform_driver_register() and register_rpmsg_driver() can return
error numbers, it should be better to check the return value and deal
with the exception.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240510083156.1996783-1-nichen@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Up until now, all Qualcomm platforms only had maximum 2 ports. The X Elite
(x1e80100) adds a third one. Increase the maximum allowed to 3.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-soc-qcom-pmic-glink-v1-1-e5c4cda2f745@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk4E7w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn0kACgr3uvAWXvfb9R4vCpC65F4f49ZQwAoIkHQBPl
/5HdrlIIYW2OzdUixH3e
=e3pI
-----END PGP SIGNATURE-----
Merge tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release. There
were a couple of cleanups in the core but nothing substantial, the
updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver.
- Overhaul of the PXA2xx driver, mostly API updates.
- A number of DT binding conversions.
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZB2z0ACgkQJNaLcl1U
h9CCxgf/ZSy6jKbUejdq/JtdrhVCamaEVQ1X5FAk18wlumQVwFC/Bsntr1hVWDjg
Ai+G/UYWtfabyVePZKh1zCcoloSuZheHcxAMP+43un1doWcHps6leiPfb9yAysux
VxeIBfSUOfeFbN697Jz8PDTIhxHMUh0R4QYqqIyrT1RSS0alRZoDyaQpTWied0Nt
pOUWi9SVt0jm/G+X29a6Q/pFsr0oEJHxZgvriwlJAyzWr1OModFXdTfdK+qMS1Hn
huafVu4bWCEognGlnXCQSRL94Fxo1nab1PvMuWK2VXNDL7xexqQ33cp4VILZvJo1
qR9YtiRXpScAmO7f8ccGcSlz8vw5jQ==
=x3Vz
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release.
There were a couple of cleanups in the core but nothing substantial,
the updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver
- Overhaul of the PXA2xx driver, mostly API updates
- A number of DT binding conversions
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0"
* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
spi: dw: Bail out early on unsupported target mode
spi: Remove unneded check for orig_nents
MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
spi: pxa2xx: Drop the stale entry in documentation TOC
spi: pxa2xx: Don't provide struct chip_data for others
spi: pxa2xx: Remove timeout field from struct chip_data
spi: pxa2xx: Remove DMA parameters from struct chip_data
spi: pxa2xx: Drop struct pxa2xx_spi_chip
spi: pxa2xx: Don't use "proxy" headers
spi: pxa2xx: Remove outdated documentation
spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
spi: pxa2xx: Allow number of chip select pins to be read from property
spi: dt-bindings: ti,qspi: convert to dtschema
spi: bitbang: Add missing MODULE_DESCRIPTION()
spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
spi: dw: Drop default number of CS setting
spi: dw: Convert dw_spi::num_cs to u32
spi: dw: Add a number of native CS auto-detection
spi: dw: Convert to using BITS_TO_BYTES() macro
...
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar).
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin).
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek cpufreq: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König).
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmZCZrASHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxH3cP/RwYN6V3H+XUlhxN0M1GXb8zkLGTLm9X
mGRKzDAoElGwYJVSpGPPtP0F+IaS3Sb7JnB719lSS7u7LmYIcqivTaBRdDIHWILJ
qWbTSy7+84Zakf0RZ5qRr3GIGcNHmY5QDZf3/jC0AX4VBnFqFCjpaW04zmUjmAqn
k13V3vfHl0J2/qKkm/JIvg2hubcAQzcP9UMgsjRE/S9QzNScEe7910v+0pv8XyUW
4kdjSItUG8CaJV5er/XarYl4bh39OqT8Lvuo4wbaCFvOyRsMHoXqStxZVLTb9iEI
j96vBXdy5Bfs503vc+Bu3TGcKPQTfjeRkEYDlwvpxwtJfMGnRQemgidSQwsbz208
oQaybFxU0UHMgsVh1R0VrbdrhUuMxUz1OrCPSg6rhYJTZ1UhTwISoDTdf+SstGCC
ODZgG59m6ez5udFAeavLA319jQEGL/oWPkHckVld4Gr10qrMu7SWseflx/+RY2dG
Rjvd/Kv9FYWVyrIttQf3YIFlc3SLhM5K4IxPhzvj94MDs4spbwAx3wk5lR1Nw2ct
HIVVjfBS+9I5dlRI7+VLM7VzD1JUxOOeZH84aTMDL080hiFZLEJaD+TkCc2QCa02
5fGSa1DM5wX87TCdltRtW+OP715Q+97OXdeRQtwgIewfM8zPi0m2ctODNj08+EO1
qmlFSJYTmFhR
=el5Y
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
Merge Enery Model update and a power management documentation update for
6.10:
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
* pm-em:
soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
PM: EM: Add em_dev_update_chip_binning()
PM: EM: Refactor em_adjust_new_capacity()
OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
* pm-docs:
Documentation: PM: Update platform_pci_wakeup_init() reference
As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmY39LkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGaB8H+wWcwT1O7K2SQx1a
sHDYJSXfbjgShS7Wt+gbDNvhGJqG/5FkpHyBmBKUdElZs8QMf21GAbIfJvzcNThA
g+FakIMjfhNH/dr6TJXHWbb2NZV67exDbbuaQDyMhNhIZqil4BH/OEPbLYIdquvm
/HDGFB/whVoHVC+Ug8esEOL3Uy+rizBDlsT/K4ZgpOC3TuUmlRpptSVACwjcCGXM
PFKyyTIr0ZnKcz3+4yTEtpDFm6e/ujxMwM66GBCgmPaZ3lJp5ruY3kGpBTmSyoqV
Rh3CQlIhBo8gwlAx/yQXfxEZomhxT6DfRpc6s/1W0J1UZN/j2pYy056OYyckG32c
uQ9ujxQ=
=M0wP
-----END PGP SIGNATURE-----
Merge 6.9-rc7 into usb-next
We want the USB fixes in here as well, and resolve a merge conflict in
drivers/usb/dwc3/core.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a sleep-while-atomic issue in pmic_glink, stemming from the
fact that the GLINK callback comes from interrupt context.
It fixes the Bluetooth address in the example of qcom,wcnss, and it
enables UEFI variables on SC8180X devices (Primus and Flex 5G).
-----BEGIN PGP SIGNATURE-----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=rvvf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CB3q
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.10
This fixes a sleep-while-atomic issue in pmic_glink, stemming from the
fact that the GLINK callback comes from interrupt context.
It fixes the Bluetooth address in the example of qcom,wcnss, and it
enables UEFI variables on SC8180X devices (Primus and Flex 5G).
* tag 'qcom-drivers-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
Link: https://lore.kernel.org/r/20240508020900.204413-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZjUIHwAKCRB4tDGHoIJi
0r8RAQD+B5rJde/sQuQlmkJGrmZfyE/6/I1ZFxv0/xHhRPNWRAD/RFTTDthL/7c4
frMGl/nWSD3fvGmXrQ7Dp6wc1APIdQI=
=BWHh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QGOJ
-----END PGP SIGNATURE-----
Merge tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The recently introduced commit '635ce0db8956 ("soc: qcom: pmic_glink:
don't traverse clients list without a lock")' ensured that the clients
list is not modified while traversed.
But the callback is made from the GLINK IRQ handler and as such this
mutual exclusion can not be provided by a (sleepable) mutex.
Replace the mutex with a spinlock.
Fixes: 635ce0db89 ("soc: qcom: pmic_glink: don't traverse clients list without a lock")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240430-pmic-glink-sleep-while-atomic-v1-1-88fb493e8545@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This adds a much needed cleanup for the MediaTek CMDQ helper driver and
also some more helper functions which will be used in drivers using the
MediaTek Global Command Engine (GCE) HW.
Also adds support for MT8188's VPPSYS mutex for MDP3 support, a new SoC
in the mtk-socinfo driver and changes the marketing name for the pre
existing MT8188 SoC.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZi+cOCgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4QsoBAPuI
rGRlN0B+gFmkv/Q90EXVRd3UoIDCUK7rlqWjegWaAP0eb8s/Rtl2xy0x5OrEFX+R
AfGVBb6frmdRGFYi7gl7Bg==
=XSlW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Nyho
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.10
This adds a much needed cleanup for the MediaTek CMDQ helper driver and
also some more helper functions which will be used in drivers using the
MediaTek Global Command Engine (GCE) HW.
Also adds support for MT8188's VPPSYS mutex for MDP3 support, a new SoC
in the mtk-socinfo driver and changes the marketing name for the pre
existing MT8188 SoC.
* tag 'mtk-soc-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
soc: mediatek: socinfo: Advertise about unknown MediaTek SoC
soc: mediatek: cmdq: Don't log an error when gce-client-reg is not found
soc: mediatek: mtk-cmdq: Add cmdq_pkt_acquire_event() function
soc: mediatek: mtk-cmdq: Add cmdq_pkt_poll_addr() function
soc: mediatek: mtk-cmdq: Add cmdq_pkt_mem_move() function
soc: mediatek: mtk-cmdq: Add specific purpose register definitions for GCE
soc: mediatek: cmdq: Refine cmdq_pkt_create() and cmdq_pkt_destroy()
soc: mediatek: cmdq: Remove cmdq_pkt_flush_async() helper function
soc: mediatek: cmdq: Add cmdq_pkt_eoc() helper function
soc: mediatek: cmdq: Add cmdq_pkt_jump_rel() helper function
soc: mediatek: cmdq: Rename cmdq_pkt_jump() to cmdq_pkt_jump_abs()
soc: mediatek: cmdq: Add parameter shift_pa to cmdq_pkt_jump()
soc: mediatek: cmdq: Fix typo of CMDQ_JUMP_RELATIVE
Link: https://lore.kernel.org/r/20240429140245.238210-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits. Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.
The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.
initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.
Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.
The bwmon regmap cache is changed to maple tree.
After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.
Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.
More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.
Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.
The socinfo drivers learns about X1 Elite and SMB2360 PMIC.
The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmYtIvQVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FmLMQANqfDnrplxf3OpL3I8JEqeHYvdLF
e12jXZyBlSCWRBEbphHZLKj8qSTFqpFgvqxIJ1fNqZ1AG9GeJTP8aGSkSnaYoym8
7uvSWRv2lZ13mQmaCM8PQMYJ7UhLitVfwKrLfSwV7GgqxqyJ5+tnTGpEdNE3VEhW
VaiknaR7kV2T3mUmrrgivy+0rMLimDMOVu7TcLkw5aY4SaQuerElXz1/IZO29GLK
QOqEbDsf8TcImZnMsnmMvbLO+AJ/NgmhpD9SDGTbzYtGEqsbVebklQDZNj9QXjWy
o6zPoCsPn93x95jBwFp0HgdTye4UWZZ3cix/LkyyLja4l0hMJM2QOdDstmtgymbM
itmWJ3rGfcK8Gjl6NEh+OSMq0rH84uJfXR0VrT/tRDkn4eTSk6DeZJD6lvpp1x43
2RwELsdlLobfS1znuq2hz+fkVBMh35USNadfC+B2xNyhihPKI1asG8UHu8mUz2MH
/feyBxygaI3k9G3C6G4qNg3cjvY2MDqy+u6hOv9cG3CoS5z6aRxoGfxXS6I40ABz
izoFaaae798Kau+VNAKw5OKC56UbRLlTSAVCmM5FItktK+5YIxbOIxRiMxgDxL8B
JO6fUH5xUE0nF4Ni0OF233+qmfkO+0tRqiVUVEG4mNveyBgTiJtgrZOMAnqzoVmI
BkagrDlbfbG2TvKb
=E1Yk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+dt0
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.10
The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits. Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.
The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.
initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.
Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.
The bwmon regmap cache is changed to maple tree.
After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.
Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.
More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.
Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.
The socinfo drivers learns about X1 Elite and SMB2360 PMIC.
The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.
* tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (21 commits)
soc: qcom: cmd-db: replace deprecated strncpy with strtomem
soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request
firmware: qcom: scm: Modify only the download bits in TCSR register
firmware: qcom: scm: Fix __scm and waitq completion variable initialization
firmware: qcom: scm: Rework dload mode availability check
firmware: qcom: scm: Remove redundant scm argument from qcom_scm_waitq_wakeup()
firmware: qcom: scm: Remove log reporting memory allocation failure
soc: qcom: pmic_glink: notify clients about the current state
soc: qcom: pmic_glink: don't traverse clients list without a lock
soc: qcom: mention intentionally broken module autoloading
firmware: qcom: qcm: fix unused qcom_scm_qseecom_allowlist
MAINTAINERS: Split Qualcomm SoC and linux-arm-msm entries
soc: qcom: qcom_stats: Add DSPs and apss subsystem stats
dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible
soc: qcom: socinfo: Add SMB2360 PMIC
soc: qcom: socinfo: Add X1E80100 SoC ID table entry
dt-bindings: arm: qcom,ids: Add SoC ID for X1E80100
soc: qcom: Update init level to core_initcall() for cmd-db and rpmh-rsc
soc: qcom: icc-bwmon: Convert to use maple tree register cache
firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()
...
Link: https://lore.kernel.org/r/20240427160917.1431354-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a single commit that adds a wake event for Ethernet for
some devices.
-----BEGIN PGP SIGNATURE-----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=Mw2q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Kd59
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.10-rc1
This contains a single commit that adds a wake event for Ethernet for
some devices.
* tag 'tegra-for-6.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
Link: https://lore.kernel.org/r/20240426180519.3972626-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add the check for obtaining complete port attribute in the HCCS driver
- Replace MAILBOX dependency with PCC for the HCCS driver
-----BEGIN PGP SIGNATURE-----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=hOU5
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ypb3
-----END PGP SIGNATURE-----
Merge tag 'hisi-drivers-for-6.10' of https://github.com/hisilicon/linux-hisi into soc/drivers
HiSilicon driver updates for v6.10
- Add the check for obtaining complete port attribute in the HCCS driver
- Replace MAILBOX dependency with PCC for the HCCS driver
* tag 'hisi-drivers-for-6.10' of https://github.com/hisilicon/linux-hisi:
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
Link: https://lore.kernel.org/r/662A3EDE.5070708@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the wake event for the EQOS ethernet controller on Tegra194 and
Tegra234 devices, so that system can be woken up by an event from this
ethernet controller.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The kunpeng_hccs driver depends on the Platform Communication Channel
Driver. If the PCC driver is not enabled, this driver will be failed
to probe. And since the PCC driver depends on the MAILBOX, replace
the MAILBOX dependency with the PCC.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The hccs_get_all_port_attr() is used to obtain the attribute of all the
ports on a specified DIE from the firmware. However this interface doesn't
ensure whether the firmware reports the complete attribute of all the ports
or not. So this patch adds the check for this.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add an entry for the MT8395 SoC with commercial name Genio 1200.
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20240404082056.93454-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In case we're running on a MediaTek SoC that is not declared in the
socinfo_data_table, print a message stating that and, with it, also
print out the read eFuse data: this allows to easily add a new SoC
in the table, granted that its actual soc/segment/marketing names
are already previously known.
This is especially useful when booting an already known SoC that
already has socinfo support, but has a different silicon version
and/or revision, hence different model information in the eFuses.
Link: https://lore.kernel.org/r/20240314113015.121940-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Most of the callers to this function do not require CMDQ support, it is
optional, so the missing property shouldn't cause an error message.
However, it could result on degraded performance, so the fact that it's
missing should still be alerted. Furthermore, the callers that do
require CMDQ support already log at the error level when an error is
returned.
Change the log message in this helper to be printed at the warning level
instead.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-log-dbg-v2-1-4975077173d0@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add cmdq_pkt_acquire_event() function to support CMDQ user making
an instruction for acquiring event.
CMDQ users can use cmdq_pkt_acquire_event() as `mutex_lock`
and cmdq_pkt_clear_event() as `mutex_unlock` to protect the global
resource modified instructions between them.
cmdq_pkt_acquire_event() would wait for event to be cleared.
After event is cleared by cmdq_pkt_clear_event() in other GCE threads,
cmdq_pkt_acquire_event() would set event and keep executing next
instruction. So the mutex would work like this:
cmdq_pkt_acquire_event() /* mutex lock */
/* critical secton instructions that modified global resource */
cmdq_pkt_clear_event() /* mutex unlock */
Prevent the critical section instructions from being affected by other
GCE threads.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307013458.23550-5-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add cmdq_pkt_poll_addr function to support CMDQ user making
an instruction for polling a specific address of hardware rigster
to check the value with or without mask.
POLL is a legacy operation in GCE, so it does not support SPR and
CMDQ_CODE_LOGIC. To support polling the register address which doesn't
have the subsys id, CMDQ users need to make an instruction with GPR and
CMDQ_CODE_MASK operation to move the register address to be poll into GPR.
Then users can make an POLL instruction with GPR to poll the register
address assigned in previous instruction.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307013458.23550-4-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add cmdq_pkt_mem_move() function to support CMDQ user making
an instruction for moving a value from a source address to a
destination address.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307013458.23550-3-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
cmdq_pkt_create() and cmdq_pkt_destroy() is not suitable for
client drivers so each client driver has implement its own
function. This refinement would pass struct cmdq_pkt pointer into
cmdq_pkt_create(). In addition, client driver has the struct
cmdq_client information, so it's not necessary to store this
information in struct cmdq_pkt. After this refinement, client
drivers could use these helper funciton instead of implementing
its own version.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20240222154120.16959-8-chunkuang.hu@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
cmdq_pkt_flush_async() is not used by all client drivers (MediaTek
drm driver and MediaTek mdp3 driver), so remove it.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20240222154120.16959-7-chunkuang.hu@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
cmdq_pkt_eoc() append eoc command to CMDQ packet. eoc command
would ask GCE to generate IRQ. It's usually appended to the end
of packet to notify all command in the packet is done.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20240222154120.16959-6-chunkuang.hu@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
cmdq_pkt_jump_rel() append relative jump command to the packet.
Relative jump change PC to the target address with offset from
current PC.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240222154120.16959-5-chunkuang.hu@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In order to distinguish absolute jump and relative jump,
cmdq_pkt_jump() append absolute jump command, so rename it to
cmdq_pkt_jump_abs().
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240222154120.16959-4-chunkuang.hu@kernel.org
[Angelo: Added temporary wrapper to avoid build breakage]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In original design, cmdq_pkt_jump() call cmdq_get_shift_pa() every
time to get shift_pa. But the shift_pa is constant value for each
SoC, so client driver just need to call cmdq_get_shift_pa() once
and pass shift_pa to cmdq_pkt_jump() to prevent frequent function
call.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20240222154120.16959-3-chunkuang.hu@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
For cmdq jump command, offset 0 means relative jump and offset 1
means absolute jump. cmdq_pkt_jump() is absolute jump, so fix the
typo of CMDQ_JUMP_RELATIVE in cmdq_pkt_jump().
Fixes: 946f1792d3 ("soc: mediatek: cmdq: add jump function")
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240222154120.16959-2-chunkuang.hu@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The mtk-socinfo driver uses symbols 'soc_device_register' and
'soc_device_unregister' which are part of the bus driver for
System-on-Chip devices.
Select SOC_BUS to make sure that driver is built and the symbols are
available.
Fixes: 423a54da3c ("soc: mediatek: mtk-socinfo: Add driver for getting chip information")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/cc8f7f7da5bdccce514a320e0ae7468659cf7346.1707327680.git.daniel@makrotopia.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The thermal framework registers thermal zones as specified in DT and
including the "-thermal" suffix: append that to the driver specified
tzone_name to actually match the thermal zone name as registered by
the thermal API.
Fixes: 2bfbf82956 ("soc: mediatek: mtk-svs: Constify runtime-immutable members of svs_bank")
Link: https://lore.kernel.org/r/20240318113237.125802-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned
addresses associated with it. These control voltage, enable state, mode,
and in legacy targets, voltage headroom. The current in-flight request
checking logic looks for exact address matches. Requests for different
addresses of the same RPMh resource as thus not detected as in-flight.
Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight
request check for VRM requests by ignoring the address offset.
This ensures that only one request is allowed to be in-flight for a given
VRM resource. This is needed to avoid scenarios where request commands are
carried out by RPMh hardware out-of-order leading to LDO regulator
over-current protection triggering.
Fixes: 658628e7ef ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In case the client is registered after the pmic-glink recived a response
from the Protection Domain mapper, it is going to miss the notification
about the state. Notify clients about the current state upon
registration.
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-2-aed4e02baacc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Take the client_lock before traversing the clients list at the
pmic_glink_state_notify_clients() function. This is required to keep the
list traversal safe from concurrent modification.
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-1-aed4e02baacc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm PMIC ChargerPD ULOG and RPM Master Statistics drivers are
solely for debugging purposes and should not be autoloaded as modules.
Add comments to annotate missing MODULE_DEVICE_TABLE.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410184522.271889-1-krzk@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
mbox_send_message() sends a u32 bit message, not a pointer to a message.
We only convert to a pointer type as a generic type. If we want to send
a dummy message of 0, then simply send 0 (NULL).
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325165507.30323-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
When the voltage for OPPs is adjusted there is a need to also update
Energy Model framework. The EM data contains power values which depend
on voltage values. The EM structure is used for thermal (IPA governor)
and in scheduler task placement (EAS) so it should reflect the real HW
model as best as possible to operate properly.
Based on data on Exynos5422 ASV tables the maximum power difference might
be ~29%. An Odroid-XU4 (with a random sample SoC in this chip lottery)
showed power difference for some OPPs ~20%. Therefore, it's worth to
update the EM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now as all UCSI issues have been fixed, enable UCSI subdevice on the
Qualcomm SC8180X platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-11-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now as all UCSI issues have been fixed, reenable UCSI subdevice on the
Qualcomm SC8280XP platform.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-10-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All Renesas R-Car Gen2 SoCs have Timer Units (TMU). Enable support for
them by selecting the SYS_SUPPORTS_SH_TMU gatekeeper config symbol.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/b7b9fdd6f517a8b29bf5754e7f083d3b71805130.1710865761.git.geert+renesas@glider.be
There is nothing from pxa2xx_spi.h used by soc/pxa/ssp.c.
Replace it with pxa2xx_ssp.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240307195056.4059864-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics
and we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp
packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gpLl
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter, wireguard and IPsec.
I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as
a netfilter maintainer due to constant stream of bug reports. Not sure
what we can do but IIUC this is not the first such case.
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics and
we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace
tstamp packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation"
* tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
selftests: forwarding: Fix ping failure due to short timeout
MAINTAINERS: step down as netfilter maintainer
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
net: dsa: mt7530: fix handling of all link-local frames
net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
bpf: report RCU QS in cpumap kthread
net: report RCU QS on threaded NAPI repolling
rcu: add a helper to report consolidated flavor QS
ionic: update documentation for XDP support
lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
octeontx2-af: Use separate handlers for interrupts
octeontx2-pf: Send UP messages to VF only when VF is up.
octeontx2-pf: Use default max_active works instead of one
octeontx2-pf: Wait till detach_resources msg is complete
octeontx2: Detect the mbox up or down message via register
devlink: fix port new reply cmd type
tcp: Clear req->syncookie in reqsk_alloc().
net/bnx2x: Prevent access to a freed page in page_pool
...
These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing.
-----BEGIN PGP SIGNATURE-----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=IzoE
-----END PGP SIGNATURE-----
Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet).
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich).
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven).
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam).
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka).
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown).
- Support variable TMU array size for new platforms (Peng Fan).
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio).
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=jtjA
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These update thermal drivers for ARM platforms by adding new hardware
support (r8a779h0, H616 THS), addressing issues (Mediatek LVTS,
Mediatek MT7896, thermal-of) and cleaning up code.
Specifics:
- Fix memory leak in the error path at probe time in the Mediatek
LVTS driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven)"
* tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
Add SoC Info support for the X1E80100 platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240223-x1e80100-socinfo-v1-2-be581ca60f27@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
cmd-db and rpmh-rsc are used by clients like regulators, interconnects and
clocks for resource voting. These clients are in core_initcall() while
cmd-db and rpmh-rsc are in arch_initcall(). Update init level for these
drivers also to core_initcall() to avoid unnecessary probe defer during
boot up.
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240217-init_level-v1-1-bde9e11f8317@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: wangkaiyuan <wangkaiyuan@inspur.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240309072825.45385-1-wangkaiyuan@inspur.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to use
it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to cover
some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmX0foEACgkQ+vtdtY28
YcOkUg//T5Q+ZudVn/oJGre3crfPU4O/RHbG+brbwpBZEdiwTGlIjI8ceThjumCO
MY25yRewCIZtS8MLlRb/lNPUjQxPeyYWnpO3KZHbOJhU8bJCl2M5P0CQOYJNp0fl
fMFhFU5bKVoXyK6y3qx7ivZTXSBCz9KzB1HxY3LueMHVgWiO1Oi++XjLfcos86Mh
7dKZKNbpcnBFkXiESMksQS+asZkoRtZloFg4iFjniSLa8AgYJLsZXd7iW4s0IXy+
Xj+5IcIRcPv2xQoXfCvlcKMheJyePDA1coYpO8pmOYOpjCQzsCnnbzoNERW6hc9u
0DF2IWnq9WLlQ8RVijbECRPgwW6zuU+aklUZLz2q0AiwCVySHaMdC9iYe+KK/7GH
m0F21x5mpfK0LVfOMWLsmuqKWn9J164VAeTY9zHqcWuvCohD5ulftvQgRBEiSDtv
V3l668t6v67iMkYa8SncbuMkV/NSShWPGne+yP3smvL0pe0P0MJYb1XSstlbNXuK
whTDaCydEHx3JPJ6VS/1aJnELFm+uZVl8wjhfrgbWo2hIC83qjN3k0yV+vFNdFzT
5PUfI858fvgYOrGsswYCCJXmb/s37NImCnIF/sjqvj50BA468261KYAFtapa2Vlj
uvpKgIZHJEDOK6TPlk5n7+aaOwoLMYzm+yov/0gyRpRKqsXu52U=
=YzNN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for H616 THS controller for the Sun8i platforms. Note
that this change relies on another change in the SoC specific code
which is included in this branch (Martin Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the driver (Geert Uytterhoeven)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmXxqsUACgkQqDIjiipP
6E9jDgf+NpBl2l9Wb8EhFcB+QRcOY79rn8KzifM4XdU1qwoog3I64lt5mAcznpbf
7hLK9DQJYjuIx8oi/uxKaYSCno1bwuY/Vpi0/BBQ2DxhhX26C7XfZ+D4o1M3/ciZ
/jsoaXg3WMKYVeywaHohWxjWH+rLGXxmxDlfcAXlKdAZkbEKLCzsbaRaSy/H8Xhc
zk9Cr2RdV+HHcuAWK1TGEHUGXINSR5tk5TvY7QCfvLYsloGpSLi6vr68CAEpvBQB
6pxW8BkAWAVQy6pgP3WthzpE+ZkEnv1vhu7fn0uoEjuxedqvdj+PKDC4svm1k/pA
+8sV89A5RZi1zOoWWYj8TnH/K2W85w==
=rTh4
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.9-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge additional thermal control changes for 6.9-rc1 from Daniel Lezcano:
"- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for H616 THS controller for the Sun8i platforms. Note
that this change relies on another change in the SoC specific code
which is included in this branch (Martin Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the driver (Geert Uytterhoeven)"
* tag 'thermal-v6.9-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
A previous bugfix added a call to kcalloc(), which starting in gcc-14
causes a harmless warning about the argument order:
drivers/soc/fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
drivers/soc/fsl/dpio/dpio-service.c:526:29: error: 'kcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
526 | ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
| ^~~~~~
drivers/soc/fsl/dpio/dpio-service.c:526:29: note: earlier argument should specify number of elements, later size of each element
Since the two are only multiplied, the order does not change the
behavior, so just fix it now to shut up the compiler warning.
Dmity independently came up with the same fix.
Fixes: 5c4a5999b2 ("soc: fsl: dpio: avoid stack usage warning")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
smp_call_function always runs its callback in hard IRQ context, even on
PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock
for cgr_lock to ensure we aren't waiting on a sleeping task.
Although this bug has existed for a while, it was not apparent until
commit ef2a8d5478 ("net: dpaa: Adjust queue depth on rate change")
which invokes smp_call_function_single via qman_update_cgr_safe every
time a link goes up or down.
Fixes: 96f413f476 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Closes: https://lore.kernel.org/all/20230323153935.nofnjucqjqnz34ej@skbuf/
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/87wmsyvclu.fsf@pengutronix.de/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smp_call_function_single disables IRQs when executing the callback. To
prevent deadlocks, we must disable IRQs when taking cgr_lock elsewhere.
This is already done by qman_update_cgr and qman_delete_cgr; fix the
other lockers.
Fixes: 96f413f476 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code.
- Feature updates for Tegra and Qualcomm platforms for added
hardware support.
- A number of platforms get soc_device additions for identifying newly
added chips from Renesas, Qualcomm, Mediatek and Google.
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems.
-----BEGIN PGP SIGNATURE-----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=bV/K
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
The Allwinner H616 SoC contains a mysterious bit at register offset 0x0
in the SRAM control block. If bit 16 is set (the reset value), the
temperature readings of the THS are way off, leading to reports about
200C, at normal ambient temperatures. Clearing this bits brings the
reported values down to the expected values.
The BSP code clears this bit in firmware (U-Boot), and has an explicit
comment about this, but offers no real explanation.
Experiments in U-Boot show that register 0x0 has no effect on the SRAM C
visibility: all tested bit settings still allow full read and write
access by the CPU to the whole of SRAM C. Only bit 24 of the register at
offset 0x4 makes all of SRAM C inaccessible by the CPU. So modelling
the THS switch functionality as an SRAM region would not reflect reality.
Since we should not rely on firmware settings, allow other code (the THS
driver) to access this register, by exporting it through the already
existing regmap. This mimics what we already do for the LDO control and
the EMAC register.
To avoid concurrent accesses to the same register at the same time, by
the SRAM switch code and the regmap code, use the same lock to protect
the access. The regmap subsystem allows to use an existing lock, so we
just need to hook in there.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240219153639.179814-2-andre.przywara@arm.com
There is no reason to use RESERVEDMEM_OF_DECLARE() as the initialization
hook just saves off the base address and size. Use of
RESERVEDMEM_OF_DECLARE() is reserved for non-driver code and
initialization which must be done early. For qbman, retrieving the
address and size can be done in probe just as easily.
Link: https://lore.kernel.org/r/20240201192931.1324130-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This fixes a "defined but not used"-warning in SPM driver when kernel is
built without regulator support, and corrects a couple of kernel-doc
issues in aoss and geni-se drivers.
-----BEGIN PGP SIGNATURE-----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=3ZwG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+egw
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few Qualcomm driver fixes for v6.9
This fixes a "defined but not used"-warning in SPM driver when kernel is
built without regulator support, and corrects a couple of kernel-doc
issues in aoss and geni-se drivers.
* tag 'qcom-drivers-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
Link: https://lore.kernel.org/r/20240306032120.5036-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Extend Exynos PMU (Power Management Unit) driver being also the
syscon to main system controller registers block, to support Google
GS101. The Google GS101 has PMU registers protected and writing is
available only via SMC. The Exynos PMU will register its own custom
regmap for such case of mixed MMIO+SMC.
2. Rework Samsung watchdog driver to get the regmap to PMU block not
via syscon API, but from the Exynos PMU driver. This is necessary
for the watchdog driver to work on Google GS101.
-----BEGIN PGP SIGNATURE-----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=FkS9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mJ3H
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC driver changes for v6.9, part two
1. Extend Exynos PMU (Power Management Unit) driver being also the
syscon to main system controller registers block, to support Google
GS101. The Google GS101 has PMU registers protected and writing is
available only via SMC. The Exynos PMU will register its own custom
regmap for such case of mixed MMIO+SMC.
2. Rework Samsung watchdog driver to get the regmap to PMU block not
via syscon API, but from the Exynos PMU driver. This is necessary
for the watchdog driver to work on Google GS101.
* tag 'samsung-drivers-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
Link: https://lore.kernel.org/r/20240227080755.34170-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver.
The Qualcomm SMEM no longer acquires the hwspinlock during the "get"
operation, to improve the system behavior during the recovery of a
remoteproc that crashed with the hwspinlock held.
The Qualcomm Always On Subsystem (AOSS) message protocol driver gains
tracepoints, printf annotation, and a debugfs interface is introduced
for tweaking system properties during development and debugging.
The Qualcomm socinfo driver gains data for SM8475, QCM8550 and
QCS8550 platforms, and the PM2250 is renamed to PM4125.
Support for controlling the voltage regulator in SPM/SAW2 is introduced.
The gfx.lvl power-domain is dropped for SA8540P, as this resource was
incorrectly inherited from SC8280XP.
Additionally some code cleanup improvements is introduced across APR,
LLCC, SMP2P and SPM.
-----BEGIN PGP SIGNATURE-----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=T09a
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=bPSM
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.9
This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver.
The Qualcomm SMEM no longer acquires the hwspinlock during the "get"
operation, to improve the system behavior during the recovery of a
remoteproc that crashed with the hwspinlock held.
The Qualcomm Always On Subsystem (AOSS) message protocol driver gains
tracepoints, printf annotation, and a debugfs interface is introduced
for tweaking system properties during development and debugging.
The Qualcomm socinfo driver gains data for SM8475, QCM8550 and
QCS8550 platforms, and the PM2250 is renamed to PM4125.
Support for controlling the voltage regulator in SPM/SAW2 is introduced.
The gfx.lvl power-domain is dropped for SA8540P, as this resource was
incorrectly inherited from SC8280XP.
Additionally some code cleanup improvements is introduced across APR,
LLCC, SMP2P and SPM.
* tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible
soc: qcom: spm: add support for voltage regulator
soc: qcom: spm: remove driver-internal structures from the driver API
dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
dt-bindings: soc: qcom: qcom,saw2: add missing compatible strings
dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
soc: qcom: llcc: Check return value on Broadcast_OR reg read
soc: qcom: socinfo: Add Soc IDs for SM8475 family
dt-bindings: arm: qcom,ids: Add IDs for SM8475 family
soc: qcom: apr: make aprbus const
dt-bindings: soc: qcom: qcom,pmic-glink: document X1E80100 compatible
soc: qcom: add QCOM PBS driver
dt-bindings: soc: qcom: Add qcom,pbs bindings
pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl
soc: qcom: socinfo: rename PM2250 to PM4125
soc: qcom: aoss: Add tracepoints in qmp_send()
soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550
soc: qcom: aoss: Add debugfs interface for sending messages
soc: qcom: smem: remove hwspinlock from item get routine
...
Link: https://lore.kernel.org/r/20240225030612.480241-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This set of changes adds ACPI support for the APBMISC driver and cleans
up a few things like dependencies and unused code.
-----BEGIN PGP SIGNATURE-----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=8s0Z
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=j1US
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.9-rc1
This set of changes adds ACPI support for the APBMISC driver and cleans
up a few things like dependencies and unused code.
* tag 'tegra-for-6.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add SD wake event for Tegra234
soc/tegra: pmc: Update scratch as an optional aperture
soc/tegra: pmc: Update address mapping sequence for PMC apertures
bus: tegra-aconnect: Update dependency to ARCH_TEGRA
soc/tegra: Fix build failure on Tegra241
soc/tegra: fuse: Fix crash in tegra_fuse_readl()
soc/tegra: fuse: Define tegra194_soc_attr_group for Tegra241
soc/tegra: fuse: Add support for Tegra241
soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234
soc/tegra: fuse: Add function to print SKU info
soc/tegra: fuse: Add function to add lookups
soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
soc/tegra: fuse: Refactor resource mapping
soc/tegra: fuse: Use dev_err_probe for probe failures
mm/util: Introduce kmemdup_array()
soc/tegra: pmc: Remove some old and deprecated functions and constants
Link: https://lore.kernel.org/r/20240223174849.1509465-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add missing kerneldoc to silence:
qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_root' not described in 'qmp'
qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_files' not described in 'qmp'
Fixes: d51d984c55 ("soc: qcom: aoss: Add debugfs interface for sending messages")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240225202545.59113-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The newly added code causes a build failure when -Werror is set:
drivers/soc/qcom/spm.c:388:12: error: 'spm_get_cpu' defined but not used [-Werror=unused-function]
Remove the #ifdef and instead use an IS_ENABLED() check that lets the
compiler perform dead code elimination instead of the preprocessor.
Fixes: 6496dba142 ("soc: qcom: spm: add support for voltage regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240221154457.2007420-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZeCIDAAKCRDj7w1vZxhR
xSYQAP9KTXlKqw9p/jFw/MFqBxzvwmi4/M5iUReoajPo1uCeCAD/ZY71qqBKCnrx
LiLHbQgvzWowxyq2A6fS28Ml7Vb5nQo=
=FZcr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-02-29' of https://anongit.freedesktop.org/git/drm/drm-misc into drm-fixes
A reset fix for host1x, a resource leak fix and a probe fix for aux-hpd,
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229-angelic-adorable-teal-fbfabb@houat
Some Exynos based SoCs like Tensor gs101 protect the PMU registers for
security hardening reasons so that they are only write accessible in el3
via an SMC call.
As most Exynos drivers that need to write PMU registers currently obtain a
regmap via syscon (phys, pinctrl, watchdog). Support for the above usecase
is implemented in this driver using a custom regmap similar to syscon to
handle the SMC call. Platforms that don't secure PMU registers, get a mmio
regmap like before. As regmaps abstract out the underlying register access
changes to the leaf drivers are minimal.
A new API exynos_get_pmu_regmap_by_phandle() is provided for leaf drivers
that currently use syscon_regmap_lookup_by_phandle(). This also handles
deferred probing.
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220220613.797068-2-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
We need to bail out before adding/removing devices if we are going to
-EPROBE_DEFER. Otherwise boot can get stuck in a probe deferral loop due
to a long-standing issue in driver core (see commit fbc35b45f9 ("Add
documentation on meaning of -EPROBE_DEFER")).
Deregistering the altmode child device can potentially also trigger bugs
in the DRM bridge implementation, which does not expect bridges to go
away.
[DB: slightly fixed commit message by adding the word 'commit']
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20231213210644.8702-1-robdclark@gmail.com
[ johan: rebase on 6.8-rc4, amend commit message and mention DRM ]
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: <stable@vger.kernel.org> # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-5-johan+linaro@kernel.org
A recent DRM series purporting to simplify support for "transparent
bridges" and handling of probe deferrals ironically exposed a
use-after-free issue on pmic_glink_altmode probe deferral.
This has manifested itself as the display subsystem occasionally failing
to initialise and NULL-pointer dereferences during boot of machines like
the Lenovo ThinkPad X13s.
Specifically, the dp-hpd bridge is currently registered before all
resources have been acquired which means that it can also be
deregistered on probe deferrals.
In the meantime there is a race window where the new aux bridge driver
(or PHY driver previously) may have looked up the dp-hpd bridge and
stored a (non-reference-counted) pointer to the bridge which is about to
be deallocated.
When the display controller is later initialised, this triggers a
use-after-free when attaching the bridges:
dp -> aux -> dp-hpd (freed)
which may, for example, result in the freed bridge failing to attach:
[drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16
or a NULL-pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
drm_bridge_attach+0x70/0x1a8 [drm]
drm_aux_bridge_attach+0x24/0x38 [aux_bridge]
drm_bridge_attach+0x80/0x1a8 [drm]
dp_bridge_init+0xa8/0x15c [msm]
msm_dp_modeset_init+0x28/0xc4 [msm]
The DRM bridge implementation is clearly fragile and implicitly built on
the assumption that bridges may never go away. In this case, the fix is
to move the bridge registration in the pmic_glink_altmode driver to
after all resources have been looked up.
Incidentally, with the new dp-hpd bridge implementation, which registers
child devices, this is also a requirement due to a long-standing issue
in driver core that can otherwise lead to a probe deferral loop (see
commit fbc35b45f9 ("Add documentation on meaning of -EPROBE_DEFER")).
[DB: slightly fixed commit message by adding the word 'commit']
Fixes: 080b4e2485 ("soc: qcom: pmic_glink: Introduce altmode support")
Fixes: 2bcca96abf ("soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE")
Cc: <stable@vger.kernel.org> # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-4-johan+linaro@kernel.org
A fix for a kconfig symbol whose help text has been unhelpful since its
introduction.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZdYoDAAKCRB4tDGHoIJi
0sUcAPwLS5QvKXEleGgXZDN+c1s69PB6cozGLzBhaAuq2ro1EQEAqSLINUafm7dV
vViH9CYjVivLTYzdwNLfVBvlTO+ZuQk=
=Z6rj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Xybl
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-drivers-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.8-rc6
A fix for a kconfig symbol whose help text has been unhelpful since its
introduction.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt
Link: https://lore.kernel.org/r/20240221-irate-outrage-cf7f96f83074@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
