The "slim-ifc-dev" property should not be just "true", because it allows
any type.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206180805.6621-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reference common DAI properties to fix:
sdm845-db845c.dtb: speaker@0,1: 'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206180805.6621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial codec driver for rt712 SDCA (Jack+Amp topology).
The host should connect with rt712 SdW1 interface.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230207090946.20659-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.
This is inspired from,
commit dbf54a9534 ("ASoC: rt5659: Update MCLK rate in set_sysclk()").
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1675953417-8686-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Infineon PEB2466 codec is a programmable DSP-based four channels
codec with filters capabilities.
It also provides signals as GPIOs.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230206144904.91078-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Infineon PEB2466 codec is a programmable DSP-based four channels
codec with filters capabilities.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206144904.91078-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MOD_INIT_INSTANCE IPC for a copier only contains the sink format for
output pin 0. Any additional output pins that are used need to have their
sink format set using the LARGE_CONFIG_SET IPC message.
Otherwise, firmware will report error or crash due to NULL format is used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230209142123.17193-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print the queue ID's during bind/unbind errors as well to make it easier
to see what failed exactly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230209142123.17193-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
resetting soundwire block will put the slaves out of sync and result
in re-enumeration during fsgen disable/enable path this is totally
unnecessary and resulting fifo overflows.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason we ended up with incorrect mclk rate which should be
1920000 instead of 96000, So far we were getting lucky as the same clk
is set to 192000 by wsa and va macro. This issue is discovered when there
is no wsa macro active and only rx or tx path is tested.
Fix this by setting correct rate.
Fixes: c39667ddcf ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
currently q6apm_is_adsp_ready() will only return the cached value of
previous result. If we are unlucky and previous result is not-ready
then the caller will always get not-ready flag.
This is not correct, we should query the dsp of its current state in
irrespective of previous reported state.
Fixes: 47bc8cf60e ("ASoC: qdsp6: audioreach: Add ADSP ready check")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment, playing audio with PulseAudio with the qdsp6 driver
results in distorted sound. It seems like its timer-based scheduling
does not work properly with qdsp6 since setting tsched=0 in
the PulseAudio configuration avoids the issue.
Apparently this happens when the pointer() callback is not accurate
enough. There is a SNDRV_PCM_INFO_BATCH flag that can be used to stop
PulseAudio from using timer-based scheduling by default.
According to https://www.alsa-project.org/pipermail/alsa-devel/2014-March/073816.html:
The flag is being used in the sense explained in the previous audio
meeting -- the data transfer granularity isn't fine enough but aligned
to the period size (or less).
q6apm-dai reports the position as multiple of
prtd->pcm_count = snd_pcm_lib_period_bytes(substream)
so it indeed just a multiple of the period size.
Therefore adding the flag here seems appropriate and makes audio
work out of the box.
Comment log inspired by Stephan Gerhold sent for q6asm-dai.c few years back.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It is noticed that the position pointer value seems to get a get corrupted
due to missing locking between updating and reading.
Fix this by adding a spinlock around the position pointer.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
prepare callback can be called multiple times, so unprepare the stream
if its already prepared.
Without this DSP is not happy to setting the params on a already
prepared graph.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the DT binding documentation for the Amlogic axg sound card to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230208093520.52843-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing properties as compatible, reg, sound-dai-cells.
And then check this file using 'make dt_binding_check'.
Signed-off-by: Kiseok Jo <kiseok.jo@irondevice.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230208092420.5037-8-kiseok.jo@irondevice.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the DT binding documentation for the Amlogic axg spdif output to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206153449.596326-7-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the DT binding documentation for the Amlogic axg spdif input to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206153449.596326-6-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the DT binding documentation for the Amlogic axg audio FIFOs to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206153449.596326-5-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the DT binding documentation for the Amlogic axg PDM device to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206153449.596326-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the DT binding documentation for the Amlogic tdm formatters to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206153449.596326-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the DT binding documentation for the Amlogic tdm interface to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206153449.596326-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The val is defined as unsigned int type, if(val<0) is redundant, so
delete it.
sound/soc/codecs/idt821034.c:449 idt821034_kctrl_gain_put() warn: unsigned 'val' is never less than zero.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3947
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230206075518.84169-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports
sound/soc/codecs/aw88395/aw88395_lib.c:789:6: error: Uninitialized variable: cur_scene_id [uninitvar]
if (cur_scene_id == 0) {
^
Passing a garbage value to aw_dev_parse_data_by_sec_type_v1() will cause a crash
when the value is used as an array index. This check assumes cur_scene_id is
initialized to 0, so initialize it to 0.
Fixes: 4345865b00 ("ASoC: codecs: ACF bin parsing and check library file for aw88395")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230205015733.1721009-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series adds support for the PCM delay reporting in SOF core level
and implements the needed infrastructure with IPC4 to finally enable it for MTL.
Currently this is only supported on MTL (and via IPC4), but with the
infrastructure in place it will be possible to support other platforms with
DeepBuffer.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Today I came across two regressions in next with SOF:
The topology would not load with a failure of creating playback DAI
the first patch is fixing this which was caused by a missing 'else' in the patch
After fixing the topology loading, the module unloading caused kernel panic.
The second patch is correcting that which is I likely caused by copy-paste to
set wrong unload callback for the graph element.
With these patches applied SOF is working on next and modules can be unloaded
Rename Audio buffer and soundwire manager instance registers.
Remove scratch registers as these registers can be accessed
using ACP_SCRATCH_REG_0 register relative offset.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230201165626.3169041-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'codec' is a valid node name when there is a single codec
in the link. Fix the node regular expression to apply this.
Fixes: fd00366b8e ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230202183653.486216-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All DAIs are component but not all components are DAI.
Move the component properties (sound-name-prefix ATM) to a separate schema
file so it can be used by non-DAI components, such as auxiliary devices.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230202183653.486216-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
My randconfig build setup ran into a rare build failure with
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m
CONFIG_SOUNDWIRE=y
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SND_SOC_SOF_HDA=y
CONFIG_SND_SOC_SOF_INTEL_TGL=y
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_init_caps':
hda.c:(.text+0x691): undefined reference to `sdw_intel_cnl_hw_ops'
x86_64-linux-ld: hda.c:(.text+0x6f2): undefined reference to `sdw_intel_probe'
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_sdw_startup':
hda.c:(.text+0x1c40): undefined reference to `sdw_intel_startup'
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_sdw_process_wakeen':
hda.c:(.text+0x1cb6): undefined reference to `sdw_intel_process_wakeen_event'
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_dsp_interrupt_thread':
hda.c:(.text+0x1d67): undefined reference to `sdw_intel_thread'
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_dsp_remove':
hda.c:(.text+0x2655): undefined reference to `sdw_intel_exit'
My best understanding is that the definition of
SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE was intended to avoid this
problem, but got it wrong for the SND_SOC_SOF_INTEL_SOUNDWIRE=m case,
where the 'select' is meant to set SOUNDWIRE_INTEL to the value of
SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE rather than the intersection of
SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE and SND_SOC_SOF_INTEL_SOUNDWIRE.
Change the condition to check for SND_SOC_SOF_INTEL_SOUNDWIRE to be a
boolean rather than a tristate expression in order to propagate this
as intended.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230202102247.806749-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Smatch static checker warning like below was found.
sound/soc/mediatek/mt8188/mt8188-dai-etdm.c:2487
mt8188_dai_etdm_parse_of()
warn: 'ret' returned from snprintf() might be larger than 48
2479 for (i = 0; i < MT8188_AFE_IO_ETDM_NUM; i++) {
2480 dai_id = ETDM_TO_DAI_ID(i);
2481 etdm_data = afe_priv->dai_priv[dai_id];
2482
2483 ret = snprintf(prop, sizeof(prop),
2484 "mediatek,%s-multi-pin-mode",
2485 of_afe_etdms[i].name);
2486 if (ret < 0) {
--> 2487 dev_err(afe->dev, "%s snprintf
err=%d\n",
2488
In linux kernel, snprintf() never returns negatives. On the other hand,
the format string like "mediatek,%s-multi-pin-mode" must be smaller
than sizeof(prop)=48.
After discussing in the mail thread[1], I remove the dead code to fix
the Smatch warnings.
[1]: https://lore.kernel.org/all/Y9EdBg641tJDDrt%2F@kili/
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230202103704.15626-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The delay function is used to calculate the difference
between hw_ptr and dai dma position. I2S, DMIC and SDW will
use dai dma position in shared SRAM window to calculate the
delay. HDaudio will retrieve dai dma position from host mmio memory
space since it doesn't support LLP counter reported by firmware.
In two cases dai dma position is inaccurate for delay calculation
(1) dai pipeline is started before host pipeline
(2) multiple streams mixed into one. Each stream has the same dai
dma position
Firmware calculates correct stream_start_offset for all cases including
above two. Driver subtracts stream_start_offset from dai dma position to
get accurate one.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Get HDaudio link position for current stream delay calculation
from hda registers.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM delay depends on stream position based on hardware
counter to calculate stream delay so add this ops to get
stream position according to hardware counter.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sof framework will call specific delay function for
different IPC version.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the hw_params to init time info for ipc4 delay calculation.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate time info when pcm is loaded by topology
and free it when pcm is unloaded by topology.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Start_stream_offset is used to strip invalid sample count in dai
for some cases like dai is started before host. llp_offset is used
to get current dai position from memory windows.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW can share some information with host driver, .e.g fw status, pipeline
status and volume status. On ipc4 platform it is located in memory
windows 0 with size of struct sof_ipc4_fw_reg.
With this patch, ipc4 driver can find fw information in fw_info_box
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ipc4_fw_reg defines the content of memory window 0 shared by fw.
Host driver can get fw information by data structure defined in
this file.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
