This patch factors out freeze and unfreeze of the CAN core into seperate
functions. Experiments have shown that the transition from and to freeze mode
may take several microseconds, especially the time entering the freeze mode
depends on the current bitrate.
This patch adds a while loop which polls the Freeze Mode ACK bit (FRZ_ACK) that
indicates a successfull mode change. If the function runs into a timeout a
error value is returned.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch moves the transceiver enable and disable into seperate functions,
where the NULL pointer check is hidden.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In flexcan_chip_enable() and flexcan_chip_disable() fixed delays are used.
Experiments have shown that the transition from and to low power mode may take
several microseconds.
This patch adds a while loop which polls the Low Power Mode ACK bit (LPM_ACK)
that indicates a successfull mode change. If the function runs into a timeout a
error value is returned.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed,
this patch adds the missing cleanup.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When shutting down the CAN interface (ifconfig canX down) during high CAN bus
loads, the CAN core might hang and freeze the whole CPU.
This patch fixes the shutdown sequence by first disabling the CAN core then
disabling all interrupts.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add the USB device ID for the D-Link DUB-1312 USB 3.0 to Gigabit Ethernet
Adapter to the AX88179/178A driver.
Signed-off-by: Gerry Demaret <gerry@tigron.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai says:
====================
net/mlx4: Mellanox driver update 27-02-2014
This patchset contains some fixes for small trivial bugs, and
compilation/syntactic parsers warnings
Patchset was applied and tested over commit 750f679 "Merge branch '6lowpan'"
Changes from V1:
-patch 5/9: Replace mlx4_en_mac_to_u64() with mlx4_mac_to_u64()
- Remove unnecessary define of ETH_ALEN
Changes from V0:
-patch 3/9: net/mlx4_en: Pad ethernet packets smaller than 17 bytes
- Make condition more efficient
- Didn't use canonical function to pad buffer since using bounce buffer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The mlx4_en driver support also 1Gbit and 40Gbit Ethernet devices,
changed the driver description in the menuconfig to reflect that.
Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When BlueFlame is turned on, control segment of the TX WQE is changed,
and the second line of it is used for QPN.
Changed code to use a union in the mlx4_wqe_ctrl_seg instead of casting.
This makes the code clearer and solves the static checker warning:
drivers/net/ethernet/mellanox/mlx4/en_tx.c:839 mlx4_en_xmit()
warn: potential memory corrupting cast 4 vs 2 bytes
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch force conversion to u32 to fix the following sparse warning:
drivers/net/ethernet/mellanox/mlx4/fw.c:1822:53: warning: restricted __be32
degrades to integer
Casting to u32 is safe here, because token will be returned as is
from the hardware without any modification.
Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Connect-X devices selftest speed test shouldn't fail on 1G and 40G link
speeds.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the EN driver uses a private static function
mlx4_en_mac_to_u64(). Move it to a common include file (driver.h)
for mlx4_en and mlx4_ib for further use.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Give accurate counters and avoids cache misses when several rings
update the counters of stop/wake queue.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware can't accept packets smaller than 17 bytes. Therefore need to
pad with zeros.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify mlx4_en module parameters.
In case they are out of range - reset to default values.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User priority limit has to be less than MLX4_EN_NUM_UP.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring says:
====================
6lowpan: fix issues with byte ordering types
I got some mail from a "kbuild test robot" and it detected some byte
ordering issues with the tag and datagram size value of 6LoWPAN IEEE
802.15.4 fragmentation header.
This patch series should fix the issues with the byte ordering.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The initialization of the tag value doesn't matter at begin of
fragmentation. This patch removes the initialization to zero.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Datagram size value is u16 because we convert it to host byte order
and we need to read it. Only the tag value belongs to __be16 type.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aaron Brown says:
====================
Mark updates ixgbe for LER / adapter removal. He restores the HW
address in the recovery path so the device is not perpetually removed,
fixes up some removed state ethtool results and adds checks related to
config space access.
Jacob adds support for the new SIOCGHWTSTAMP ioctl.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for the new SIOCGHWTSTAMP ioctl, which enables a
process to determine the current timestamp configuration. In order to
implement this, store a copy of the timestamp configuration. In
addition, we can remove the 'int cmd' parameter as the new set_ts_config
function doesn't use it. I also fixed a typo in the function
description.
-v2
* Only save the settings after validating them
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Configuration space reads should also be checked for removal. So
add some checks related to config space accesses.
v2:
* Fixed indent
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some ethtool tests returned apparently good results when the
adapter was in a removed state. Fix that by checking for removal.
This also fixes two paths that could return uninitialized memory
in data[4].
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hw_addr needs to be restored in the pcie recovery path or
else the device will be perpetually removed. Also restore the
value in the resume path.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this patch b44_check_phy() was called when the phy called the
adjust callback. This method only change the mac duplex mode when the
carrier was off. When the phy changed the duplex mode after the carrier
was on the mac was not changed. This happened when an external phy was
used.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When support for external phys was added to b44, the calls to start and
stop the phy were missing in the mac driver. This adds the calls to
phy_start() and phy_stop().
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull drm fixes from Dave Airlie:
"Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx
and tegra fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
MAINTAINERS: update drm git tree entry
MAINTAINERS: add entry for drm radeon driver
drm/tegra: Add guard to avoid double disable/enable of RGB outputs
gpu: host1x: do not check previously handled gathers
drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
Here are 2 USB patches for 3.14-rc5, one a new device id, and the other
fixes a reported problem with threaded irqs and the USB EHCI driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlMTrGkACgkQMUfUDdst+ylQQQCeMkgsQlVdOwr7kOBimpcpXJAx
z5EAoNfXE8VomI+RCz3Wz9oajksQp75t
=MskR
-----END PGP SIGNATURE-----
Merge tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 2 USB patches for 3.14-rc5, one a new device id, and the
other fixes a reported problem with threaded irqs and the USB EHCI
driver"
* tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: ehci: fix deadlock when threadirqs option is used
USB: ftdi_sio: add Cressi Leonardo PID
Here is a single sysfs fix for 3.14-rc5. It fixes a reported problem
with the namespace code in sysfs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlMTq7sACgkQMUfUDdst+yml/wCgkUWPlSGv3UA5AJ1yDBnFqgxB
RcAAn1CM1x6k3ULHG6Hz7SGkFg9dqpjz
=aK2B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull sysfs fix from Greg KH:
"Here is a single sysfs fix for 3.14-rc5. It fixes a reported problem
with the namespace code in sysfs"
* tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: fix namespace refcnt leak
Here are a few IIO fixes, and a new device id for a staging driver for
3.14-rc5. All have been in linux-next for a while, I did a final merge
to get the IIO fixes into this tree, they were incorrectly in the
char-misc tree for a few weeks, and I forgot to tell you to pull them
from there. This makes it a single pull request for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlMTq2EACgkQMUfUDdst+ym6mACgzzSm61DhSJcWEnDe/0EV8eeF
q7UAoIpwAjyGAP1NTFdMC9jYXzBp3OAk
=OQ2S
-----END PGP SIGNATURE-----
Merge tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg KH:
"Here are a few IIO fixes, and a new device id for a staging driver for
3.14-rc5. All have been in linux-next for a while, I did a final
merge to get the IIO fixes into this tree, they were incorrectly in
the char-misc tree for a few weeks, and I forgot to tell you to pull
them from there. This makes it a single pull request for you"
* tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID
staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
iio:gyro: bug on L3GD20H gyroscope support
iio: cm32181: Change cm32181 ambient light sensor driver
iio: cm36651: Fix read/write integration time function.
more radeon fixes
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
Currently we're only sending arp requests if we have a route to the target
(and, thus, can find out the source ip address).
There are some use cases, however, where we don't want/need to set an ip
address (or set up a specific route) for bonding to use arp monitoring *for
traffic generation*. We can easily send arp probes (arp requests with src
ip == 0) to generate arp broadcast responses from the target ip and use
them for determining if the target is up.
This, obviously, won't work with arp validation - because we don't have the
ip address set and, thus, will filter out the responses. So in that case -
print a warning.
CC: François CACHEREUL <f.cachereul@alphalink.fr>
CC: Zhenjie Chen <zhchen@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Ingo Molnar:
"Misc fixes, most of them on the tooling side"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix strict alias issue for find_first_bit
perf tools: fix BFD detection on opensuse
perf: Fix hotplug splat
perf/x86: Fix event scheduling
perf symbols: Destroy unused symsrcs
perf annotate: Check availability of annotate when processing samples
A couple of minor fixes.
Pull request of 2014-03-02
* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.
Also update driver date.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Pull x86 fixes from Peter Anvin:
"The VMCOREINFO patch I'll pushing for this release to avoid having a
release with kASLR and but without that information.
I was hoping to include the FPU patches from Suresh, but ran into a
problem (see other thread); will try to make them happen next week"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kaslr: add missed "static" declarations
x86, kaslr: export offset in VMCOREINFO ELF notes
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the series are bugfixes for qla2xxx target NPIV support
that went in for v3.14-rc1. Also included are a few DIF related
fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi
protocol version related fix from Venkatesh.
Also just a heads up that a series to address a number of issues with
iser-target active I/O reset/shutdown is still being tested, and will
be included in a separate -rc6 PULL request"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
vhost/scsi: Check LUN structure byte 0 is set to 1, per spec
qla2xxx: Fix kernel panic on selective retransmission request
Target/sbc: Don't use sg as iterator in sbc_verify_read
target: Add DIF sense codes in transport_generic_request_failure
target/sbc: Fix sbc_dif_copy_prot addr offset bug
tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs
tcm_qla2xxx: Perform configfs depend/undepend for base_tpg
tcm_qla2xxx: Add NPIV specific enable/disable attribute logic
qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown
qla2xxx: Fix qlt_lport_register base_vha callback race
Pull slave-dma fixes from Vinod Koul:
"This request brings you two small fixes. First one for fixing
dereference of freed descriptor and second for fixing sdma bindings
for it to work for imx25.
I was planning to send this about 10days ago but then I had to proceed
on my paternity leave and didnt get chance to send this. Now got a
bit of time from dady duties :)"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dma: sdma: Add imx25 compatible
dma: ste_dma40: don't dereference free:d descriptor
- One of the recent intel_pstate driver fixes introduced a rounding
error that on some systems causes the frequency to be stuck at the
lowest level forever. Fix from Dirk Brandewie.
- The firmware_class driver's PM notifier doesn't handle the
PM_RESTORE_PREPARE event during hibernation image restore and that
leads to a deadlock on umhelper_sem in __usermodehelper_disable().
Fix from Sebastian Capella.
- acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a
nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up()
among other things. Fix from Lan Tianyu.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=7EE0
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These three commits fix a recent intel_pstate regression and two old
bugs that should be fixed in -stable too, one in the ACPI processor
driver and one in the firmare loader.
Specifics:
- One of the recent intel_pstate driver fixes introduced a rounding
error that on some systems causes the frequency to be stuck at the
lowest level forever. Fix from Dirk Brandewie.
- The firmware_class driver's PM notifier doesn't handle the
PM_RESTORE_PREPARE event during hibernation image restore and that
leads to a deadlock on umhelper_sem in __usermodehelper_disable().
Fix from Sebastian Capella.
- acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a
nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up()
among other things. Fix from Lan Tianyu"
* tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Rework processor throttling with work_on_cpu()
PM / hibernate: Fix restore hang in freeze_processes()
intel_pstate: Change busy calculation to use fixed point math.
. Problem on recent gcc on x86-32 related to strict alias issue for
find_first_bit (Jiri Olsa).
. OpenSuSE: BFD detection problems related to not explicitely listing all
required libraries (Andi Kleen)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hlo4
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent build fixes for certain distro environments, from Arnaldo Carvalho de Melo:
* Problem on recent gcc on x86-32 related to strict alias issue for
find_first_bit (Jiri Olsa).
* OpenSuSE: BFD detection problems related to not explicitely listing all
required libraries (Andi Kleen)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A single line patch fixing a regression that was introduced in 3.13 in the
reworking of the mxs touch screen and ADC drivers to be interrupt rather
than polling driven. It resulted in a stray double reporting of the release
coordinate in the touch screen driver. The bug lay in the adc side
of the driver which left the statemachine in the wrong state.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=NZzD
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-3.14d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Fourth set of IIO fixes for the 3.14 kernel.
A single line patch fixing a regression that was introduced in 3.13 in the
reworking of the mxs touch screen and ADC drivers to be interrupt rather
than polling driven. It resulted in a stray double reporting of the release
coordinate in the touch screen driver. The bug lay in the adc side
of the driver which left the statemachine in the wrong state.
Add a maintainers entry for the Armada DRM driver.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent commit "fe1624c bna: RX Filter Enhancements" disables
VLAN tag stripping if the NIC is in promiscuous mode. This causes
__vlan_hwaccel_put_tag() is called when the stripping is disabled.
Because of this VLAN over bna does not work and causes BUGs in conjunction
with openvswitch like this:
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes
a customer reported issue of randomly dropping packets on the 5719.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring says:
====================
6lowpan: reimplementation of fragmentation handling
this patch series reimplementation the fragmentation handling of 6lowpan
accroding to rfc4944 [1].
The first big note is, that the current fragmentation behaviour isn't rfc
complaint. The main issue is a wrong datagram_size value which needs to be:
datagram_size = ipv6_payload + ipv6 header + (maybe compressed transport header,
currently only udp is supported)
but the current datagram_size value is calculated as:
datagram_size = ipv6_payload
Fragmentation work in a linux<->linux communication only.
Why reimplementation?
I reimplemted the reassembly side only. The current behaviour is to allocate a
skb with the reassembled size and hold all fragments in a list, protected by a
spinlock. After we received all fragments (detected by the sum of all fragments,
it begins to place all fragments into the allocated skb).
This reassembly implementation has some race condition. Additional I make it more
rfc complaint. The current implementation match on the tag value inside the frag
header only, but rfc4944 says we need to match on dst addr(mac), src addr(mac),
tag value, datagram_size value. [2]
The new reassembly handling use the inet_frag api (I mean the callback interface
of ipv6 and ipv4 reassembly). I looked into ipv6 and wanted to see how ipv6 is
dealing with reassembly, so I based my code on this implementation.
On the sending side to generate the fragments I improved the current code to use
the nearest 8 divided payload. (We can do that, because the mac layer has a
dynamic size, so it depends on mac_header how big we can do the payload).
Of course I fix also the reassembly/sending side to be rfc complaint now.
Regards
Alexander Aring
[1] http://tools.ietf.org/html/rfc4944
[2] http://tools.ietf.org/html/rfc4944#section-5.3
changes since v2:
- rework checkpatch code style issue patch.
Merge two pr_debugs into one pr_debug.
changes since v3:
- rename 6lowpan.ko to 6lowpan_rtnl.c in commit msg of patch 5/8.
changes since v4:
- Add a new patch 2/8 to introduce lowpan_uncompress_size function. Also
improving this function a little bit.
- Add a new patch 4/8 to change tag value to __be16.
- use skb_header_reset function on FRAG1 only, which should have the
lowpan header. See lowpan_get_frag_info function. (slightly improving
of fragmentation header parsing).
- changes types of variables to u16 in lowpan_skb_fragmentation.
- use lowpan_uncompress_size instead of storing necessary information
in skb control block, this can be destroyed after dev_queue_xmit call.
Thanks David for this hint.
- remove Tested-by: Martin Townsend <martin.townsend@xsilon.com>, because
too many funcionality change.
changes since v5:
- handle lowpan_addr_mode_size with lookup table.
changes since v6:
- remove unnecessary parameter in lowpan_frag_queue.
- fix commit message in patch 8/8 which included a describtion of adding the
lownpan_uncompress_size function. This was splitted in a seperate patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
