[why & how]
Cursor gets clipped off in the middle of the screen with hw
rotation 180. Fix a miscalculation of cursor offset when it's
placed near the edges in the pipe split case.
Cursor bugs with hw rotation were reported on AMD issue
tracker:
https://gitlab.freedesktop.org/drm/amd/-/issues/2247
The issues on rotation 270 was fixed by:
https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/
that partially addressed the rotation 180 too. So, this patch is the
final bits for rotation 180.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2247
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 9d84c7ef8a ("drm/amd/display: Correct cursor position on horizontal mirror")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1fd2cf0900)
Cc: stable@vger.kernel.org
[Why]
Tiled display cannot synchronize properly after S3.
The fix for commit 5f0c749158 ("drm/amd/display: Fix for otg
synchronization logic") is not enable in DCN321, which causes
the otg is excluded from synchronization.
[How]
Enable otg synchronization logic in dcn321.
Fixes: 5f0c749158 ("drm/amd/display: Fix for otg synchronization logic")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Loan Chen <lo-an.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d6ed53712f)
Cc: stable@vger.kernel.org
To be able to get to the lowest power state when suspending systems with
DCN3.5+, we must be in IPS before the display hardware is put into
D3cold. So, to ensure that the system always reaches the lowest power
state while suspending, force systems that support IPS to enter idle
optimizations before entering D3cold.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 237193e21b)
Cc: stable@vger.kernel.org # 6.10+
When hot-unplug a device which has many queues, and guest CPU will has
huge jitter, and unplugging is very slow.
It turns out synchronize_srcu() in irqfd_shutdown() caused the guest
jitter and unplugging latency, so replace synchronize_srcu() with
synchronize_srcu_expedited(), to accelerate the unplugging, and reduce
the guest OS jitter, this accelerates the VM reboot too.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-ID: <20240711121130.38917-1-lirongqing@baidu.com>
[Call it just once in irqfd_resampler_shutdown. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Q9Qj
-----END PGP SIGNATURE-----
Merge tag '6.11-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Two smb3 server fixes for access denied problem on share path checks"
* tag '6.11-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: override fsids for smb2_query_info()
ksmbd: override fsids for share path check
Add a test to verify that userspace can't change a vCPU's x2APIC ID by
abusing KVM_SET_LAPIC. KVM models the x2APIC ID (and x2APIC LDR) as
readonly, and silently ignores userspace attempts to change the x2APIC ID
for backwards compatibility.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: write changelog, add to existing test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240802202941.344889-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ignore the userspace provided x2APIC ID when fixing up APIC state for
KVM_SET_LAPIC, i.e. make the x2APIC fully readonly in KVM. Commit
a92e2543d6 ("KVM: x86: use hardware-compatible format for APIC ID
register"), which added the fixup, didn't intend to allow userspace to
modify the x2APIC ID. In fact, that commit is when KVM first started
treating the x2APIC ID as readonly, apparently to fix some race:
static inline u32 kvm_apic_id(struct kvm_lapic *apic)
{
- return (kvm_lapic_get_reg(apic, APIC_ID) >> 24) & 0xff;
+ /* To avoid a race between apic_base and following APIC_ID update when
+ * switching to x2apic_mode, the x2apic mode returns initial x2apic id.
+ */
+ if (apic_x2apic_mode(apic))
+ return apic->vcpu->vcpu_id;
+
+ return kvm_lapic_get_reg(apic, APIC_ID) >> 24;
}
Furthermore, KVM doesn't support delivering interrupts to vCPUs with a
modified x2APIC ID, but KVM *does* return the modified value on a guest
RDMSR and for KVM_GET_LAPIC. I.e. no remotely sane setup can actually
work with a modified x2APIC ID.
Making the x2APIC ID fully readonly fixes a WARN in KVM's optimized map
calculation, which expects the LDR to align with the x2APIC ID.
WARNING: CPU: 2 PID: 958 at arch/x86/kvm/lapic.c:331 kvm_recalculate_apic_map+0x609/0xa00 [kvm]
CPU: 2 PID: 958 Comm: recalc_apic_map Not tainted 6.4.0-rc3-vanilla+ #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.2-1-1 04/01/2014
RIP: 0010:kvm_recalculate_apic_map+0x609/0xa00 [kvm]
Call Trace:
<TASK>
kvm_apic_set_state+0x1cf/0x5b0 [kvm]
kvm_arch_vcpu_ioctl+0x1806/0x2100 [kvm]
kvm_vcpu_ioctl+0x663/0x8a0 [kvm]
__x64_sys_ioctl+0xb8/0xf0
do_syscall_64+0x56/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fade8b9dd6f
Unfortunately, the WARN can still trigger for other CPUs than the current
one by racing against KVM_SET_LAPIC, so remove it completely.
Reported-by: Michal Luczaj <mhal@rbox.co>
Closes: https://lore.kernel.org/all/814baa0c-1eaa-4503-129f-059917365e80@rbox.co
Reported-by: Haoyu Wu <haoyuwu254@gmail.com>
Closes: https://lore.kernel.org/all/20240126161633.62529-1-haoyuwu254@gmail.com
Reported-by: syzbot+545f1326f405db4e1c3e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000c2a6b9061cbca3c3@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240802202941.344889-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While building kernel documention using make htmldocs command, I was
getting unexpected indentation error. Single description was given for
two module parameters with wrong indentation. So, I corrected the
indentation of both parameters and the description.
Signed-off-by: Shibu kumar <shibukumar.bit@gmail.com>
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 0d815e3400 ("dm-crypt: limit the size of encryption requests")
Use this_cpu_ptr() instead of open coding the equivalent in various
user return MSR helpers.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240802201630.339306-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent change to the driver exposed a bug where the MAC RX
filters (unicast MAC, broadcast MAC, and multicast MAC) are
configured and enabled before the RX path is fully initialized.
The result of this bug is that after the PHY is started packets
that match these MAC RX filters start to flow into the RX FIFO.
And then, after rx_init() is completed, these packets will go
into the driver RX ring as well. If enough packets are received
to fill the RX ring (default size is 128 packets) before the call
to request_irq() completes, the driver RX function becomes stuck.
This bug is intermittent but is most likely to be seen where the
oob_net0 interface is connected to a busy network with lots of
broadcast and multicast traffic.
All the MAC RX filters must be disabled until the RX path is ready,
i.e. all initialization is done and all the IRQs are installed.
Fixes: f7442a634a ("mlxbf_gige: call request_irq() after NAPI initialized")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240809163612.12852-1-davthompson@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is no caller in tree since introduction in commit b4f69df0f6 ("KVM:
x86: Make Hyper-V emulation optional")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Message-ID: <20240803113233.128185-1-yuehaibing@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's a debug check in io_sq_thread_park() checking if it's the SQPOLL
thread itself calling park. KCSAN warns about this, as we should not be
reading sqd->thread outside of sqd->lock.
Just silence this with data_race(). The pointer isn't used for anything
but this debug check.
Reported-by: syzbot+2b946a3fd80caf971b21@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Syzkiller reports a "KMSAN: uninit-value in pick_link" bug.
This is caused by an uninitialised page, which is ultimately caused
by a corrupted symbolic link size read from disk.
The reason why the corrupted symlink size causes an uninitialised
page is due to the following sequence of events:
1. squashfs_read_inode() is called to read the symbolic
link from disk. This assigns the corrupted value
3875536935 to inode->i_size.
2. Later squashfs_symlink_read_folio() is called, which assigns
this corrupted value to the length variable, which being a
signed int, overflows producing a negative number.
3. The following loop that fills in the page contents checks that
the copied bytes is less than length, which being negative means
the loop is skipped, producing an uninitialised page.
This patch adds a sanity check which checks that the symbolic
link size is not larger than expected.
--
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240811232821.13903-1-phillip@squashfs.org.uk
Reported-by: Lizhi Xu <lizhi.xu@windriver.com>
Reported-by: syzbot+24ac24ff58dc5b0d26b9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a90e8c061e86a76b@google.com/
V2: fix spelling mistake.
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a program is watching a file on a 9p mount, it won't see any change in
size if the file being exported by the server is changed directly in the
source filesystem, presumably because 9p doesn't have change notifications,
and because netfs skips the reads if the file is empty.
Fix this by attempting to read the full size specified when a DIO read is
requested (such as when 9p is operating in unbuffered mode) and dealing
with a short read if the EOF was less than the expected read.
To make this work, filesystems using netfslib must not set
NETFS_SREQ_CLEAR_TAIL if performing a DIO read where that read hit the EOF.
I don't want to mandatorily clear this flag in netfslib for DIO because,
say, ceph might make a read from an object that is not completely filled,
but does not reside at the end of file - and so we need to clear the
excess.
This can be tested by watching an empty file over 9p within a VM (such as
in the ktest framework):
while true; do read content; if [ -n "$content" ]; then echo $content; break; fi; done < /host/tmp/foo
then writing something into the empty file. The watcher should immediately
display the file content and break out of the loop. Without this fix, it
remains in the loop indefinitely.
Fixes: 80105ed2fd ("9p: Use netfslib read/write_iter")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218916
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1229195.1723211769@warthog.procyon.org.uk
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The inode reclaiming process(See function prune_icache_sb) collects all
reclaimable inodes and mark them with I_FREEING flag at first, at that
time, other processes will be stuck if they try getting these inodes
(See function find_inode_fast), then the reclaiming process destroy the
inodes by function dispose_list(). Some filesystems(eg. ext4 with
ea_inode feature, ubifs with xattr) may do inode lookup in the inode
evicting callback function, if the inode lookup is operated under the
inode lru traversing context, deadlock problems may happen.
Case 1: In function ext4_evict_inode(), the ea inode lookup could happen
if ea_inode feature is enabled, the lookup process will be stuck
under the evicting context like this:
1. File A has inode i_reg and an ea inode i_ea
2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea
3. Then, following three processes running like this:
PA PB
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// i_reg is added into lru, lru->i_ea->i_reg
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
i_ea->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(i_reg)
spin_unlock(&i_reg->i_lock)
spin_unlock(lru_lock)
rm file A
i_reg->nlink = 0
iput(i_reg) // i_reg->nlink is 0, do evict
ext4_evict_inode
ext4_xattr_delete_inode
ext4_xattr_inode_dec_ref_all
ext4_xattr_inode_iget
ext4_iget(i_ea->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(i_ea) ----→ AA deadlock
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&i_ea->i_state)
Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file
deleting process holds BASEHD's wbuf->io_mutex while getting the
xattr inode, which could race with inode reclaiming process(The
reclaiming process could try locking BASEHD's wbuf->io_mutex in
inode evicting function), then an ABBA deadlock problem would
happen as following:
1. File A has inode ia and a xattr(with inode ixa), regular file B has
inode ib and a xattr.
2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa
3. Then, following three processes running like this:
PA PB PC
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// ib and ia are added into lru, lru->ixa->ib->ia
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
ixa->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(ib)
spin_unlock(&ib->i_lock)
spin_unlock(lru_lock)
rm file B
ib->nlink = 0
rm file A
iput(ia)
ubifs_evict_inode(ia)
ubifs_jnl_delete_inode(ia)
ubifs_jnl_write_inode(ia)
make_reservation(BASEHD) // Lock wbuf->io_mutex
ubifs_iget(ixa->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(ixa)
| iput(ib) // ib->nlink is 0, do evict
| ubifs_evict_inode
| ubifs_jnl_delete_inode(ib)
↓ ubifs_jnl_write_inode
ABBA deadlock ←-----make_reservation(BASEHD)
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&ixa->i_state)
Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING
to pin the inode in memory while inode_lru_isolate() reclaims its pages
instead of using ordinary inode reference. This way inode deletion
cannot be triggered from inode_lru_isolate() thus avoiding the deadlock.
evict() is made to wait for I_LRU_ISOLATING to be cleared before
proceeding with inode cleanup.
Link: https://lore.kernel.org/all/37c29c42-7685-d1f0-067d-63582ffac405@huaweicloud.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219022
Fixes: e50e5129f3 ("ext4: xattr-in-inode support")
Fixes: 7959cf3a75 ("ubifs: journal: Handle xattrs like files")
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20240809031628.1069873-1-chengzhihao@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If the dm_resume method is called on a device that is not suspended, the
method will suspend the device briefly, before resuming it (so that the
table will be swapped).
However, there was a bug that the return value of dm_suspended_md was not
checked. dm_suspended_md may return an error when it is interrupted by a
signal. In this case, do_resume would call dm_swap_table, which would
return -EINVAL.
This commit fixes the logic, so that error returned by dm_suspend is
checked and the resume operation is undone.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Cc: stable@vger.kernel.org
This commit changes device mapper, so that it returns -ERESTARTSYS
instead of -EINTR when it is interrupted by a signal (so that the ioctl
can be restarted).
The manpage signal(7) says that the ioctl function should be restarted if
the signal was handled with SA_RESTART.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
If we a find that an extent is shared but its end offset is not sector
size aligned, then we don't clone it and issue write operations instead.
This is because the reflink (remap_file_range) operation does not allow
to clone unaligned ranges, except if the end offset of the range matches
the i_size of the source and destination files (and the start offset is
sector size aligned).
While this is not incorrect because send can only guarantee that a file
has the same data in the source and destination snapshots, it's not
optimal and generates confusion and surprising behaviour for users.
For example, running this test:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Use a file size not aligned to any possible sector size.
file_size=$((1 * 1024 * 1024 + 5)) # 1MB + 5 bytes
dd if=/dev/random of=$MNT/foo bs=$file_size count=1
cp --reflink=always $MNT/foo $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap
rm -f /tmp/send-test
btrfs send -f /tmp/send-test $MNT/snap
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -vv -f /tmp/send-test $MNT
xfs_io -r -c "fiemap -v" $MNT/snap/bar
umount $MNT
Gives the following result:
(...)
mkfile o258-7-0
rename o258-7-0 -> bar
write bar - offset=0 length=49152
write bar - offset=49152 length=49152
write bar - offset=98304 length=49152
write bar - offset=147456 length=49152
write bar - offset=196608 length=49152
write bar - offset=245760 length=49152
write bar - offset=294912 length=49152
write bar - offset=344064 length=49152
write bar - offset=393216 length=49152
write bar - offset=442368 length=49152
write bar - offset=491520 length=49152
write bar - offset=540672 length=49152
write bar - offset=589824 length=49152
write bar - offset=638976 length=49152
write bar - offset=688128 length=49152
write bar - offset=737280 length=49152
write bar - offset=786432 length=49152
write bar - offset=835584 length=49152
write bar - offset=884736 length=49152
write bar - offset=933888 length=49152
write bar - offset=983040 length=49152
write bar - offset=1032192 length=16389
chown bar - uid=0, gid=0
chmod bar - mode=0644
utimes bar
utimes
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=06d640da-9ca1-604c-b87c-3375175a8eb3, stransid=7
/mnt/sdi/snap/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2055]: 26624..28679 2056 0x1
There's no clone operation to clone extents from the file foo into file
bar and fiemap confirms there's no shared flag (0x2000).
So update send_write_or_clone() so that it proceeds with cloning if the
source and destination ranges end at the i_size of the respective files.
After this changes the result of the test is:
(...)
mkfile o258-7-0
rename o258-7-0 -> bar
clone bar - source=foo source offset=0 offset=0 length=1048581
chown bar - uid=0, gid=0
chmod bar - mode=0644
utimes bar
utimes
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=582420f3-ea7d-564e-bbe5-ce440d622190, stransid=7
/mnt/sdi/snap/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2055]: 26624..28679 2056 0x2001
A test case for fstests will also follow up soon.
Link: https://github.com/kdave/btrfs-progs/issues/572#issuecomment-2282841416
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 60fa6ae6e6 ("ACPI: EC: Install address space handler at the
namespace root") caused _REG methods for EC operation regions outside
the EC device scope to be evaluated which on some systems leads to the
evaluation of _REG methods in the scopes of device objects representing
devices that are not present and not functional according to the _STA
return values. Some of those device objects represent EC "alternatives"
and if _REG is evaluated for their operation regions, the platform
firmware may be confused and the platform may start to behave
incorrectly.
To avoid this problem, only evaluate _REG for EC operation regions
located in the scopes of device objects representing known-to-be-present
devices.
For this purpose, partially revert commit 60fa6ae6e6 and trigger the
evaluation of _REG for EC operation regions from acpi_bus_attach() for
the known-valid devices.
Fixes: 60fa6ae6e6 ("ACPI: EC: Install address space handler at the namespace root")
Link: https://lore.kernel.org/linux-acpi/1f76b7e2-1928-4598-8037-28a1785c2d13@redhat.com
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2298938
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2302253
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/23612351.6Emhk5qWAg@rjwysocki.net
A subsequent change will need to pass a depth argument to
acpi_execute_reg_methods(), so prepare that function for it.
No intentional functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/8451567.NyiUUSuA9g@rjwysocki.net
This reverts commit 0e6b6dedf1 ("Revert "ACPI: EC: Evaluate orphan
_REG under EC device") because the problem addressed by it will be
addressed differently in what follows.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/3236716.5fSG56mABF@rjwysocki.net
Currently the extent map shrinker can be run by any task when attempting
to allocate memory and there's enough memory pressure to trigger it.
To avoid too much latency we stop iterating over extent maps and removing
them once the task needs to reschedule. This logic was introduced in commit
b3ebb9b7e9 ("btrfs: stop extent map shrinker if reschedule is needed").
While that solved high latency problems for some use cases, it's still
not enough because with a too high number of tasks entering the extent map
shrinker code, either due to memory allocations or because they are a
kswapd task, we end up having a very high level of contention on some
spin locks, namely:
1) The fs_info->fs_roots_radix_lock spin lock, which we need to find
roots to iterate over their inodes;
2) The spin lock of the xarray used to track open inodes for a root
(struct btrfs_root::inodes) - on 6.10 kernels and below, it used to
be a red black tree and the spin lock was root->inode_lock;
3) The fs_info->delayed_iput_lock spin lock since the shrinker adds
delayed iputs (calls btrfs_add_delayed_iput()).
Instead of allowing the extent map shrinker to be run by any task, make
it run only by kswapd tasks. This still solves the problem of running
into OOM situations due to an unbounded extent map creation, which is
simple to trigger by direct IO writes, as described in the changelog
of commit 956a17d9d0 ("btrfs: add a shrinker for extent maps"), and
by a similar case when doing buffered IO on files with a very large
number of holes (keeping the file open and creating many holes, whose
extent maps are only released when the file is closed).
Reported-by: kzd <kzd@56709.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219121
Reported-by: Octavia Togami <octavia.togami@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAHPNGSSt-a4ZZWrtJdVyYnJFscFjP9S7rMcvEMaNSpR556DdLA@mail.gmail.com/
Fixes: 956a17d9d0 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Tested-by: kzd <kzd@56709.net>
Tested-by: Octavia Togami <octavia.togami@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The driver doesn't create any ALSA controls for firmware controls, so it
shouldn't be calling hda_cs_dsp_control_remove().
commit 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls for
firmware coefficients") removed the call to hda_cs_dsp_add_controls() but
didn't remove the call for destroying those controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls for firmware coefficients")
Link: https://patch.msgid.link/20240813113209.648-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[REPORT]
There is a bug report that kernel is rejecting a mismatching inode mode
and its dir item:
[ 1881.553937] BTRFS critical (device dm-0): inode mode mismatch with
dir: inode mode=040700 btrfs type=2 dir type=0
[CAUSE]
It looks like the inode mode is correct, while the dir item type
0 is BTRFS_FT_UNKNOWN, which should not be generated by btrfs at all.
This may be caused by a memory bit flip.
[ENHANCEMENT]
Although tree-checker is not able to do any cross-leaf verification, for
this particular case we can at least reject any dir type with
BTRFS_FT_UNKNOWN.
So here we enhance the dir type check from [0, BTRFS_FT_MAX), to
(0, BTRFS_FT_MAX).
Although the existing corruption can not be fixed just by such enhanced
checking, it should prevent the same 0x2->0x0 bitflip for dir type to
reach disk in the future.
Reported-by: Kota <nospam@kota.moe>
Link: https://lore.kernel.org/linux-btrfs/CACsxjPYnQF9ZF-0OhH16dAx50=BXXOcP74MxBc3BG+xae4vTTw@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the patch 78c52d9eb6 ("btrfs: check for refs on snapshot delete
resume") I added some code to handle file systems that had been
corrupted by a bug that incorrectly skipped updating the drop progress
key while dropping a snapshot. This code would check to see if we had
already deleted our reference for a child block, and skip the deletion
if we had already.
Unfortunately there is a bug, as the check would only check the on-disk
references. I made an incorrect assumption that blocks in an already
deleted snapshot that was having the deletion resume on mount wouldn't
be modified.
If we have 2 pending deleted snapshots that share blocks, we can easily
modify the rules for a block. Take the following example
subvolume a exists, and subvolume b is a snapshot of subvolume a. They
share references to block 1. Block 1 will have 2 full references, one
for subvolume a and one for subvolume b, and it belongs to subvolume a
(btrfs_header_owner(block 1) == subvolume a).
When deleting subvolume a, we will drop our full reference for block 1,
and because we are the owner we will drop our full reference for all of
block 1's children, convert block 1 to FULL BACKREF, and add a shared
reference to all of block 1's children.
Then we will start the snapshot deletion of subvolume b. We look up the
extent info for block 1, which checks delayed refs and tells us that
FULL BACKREF is set, so sets parent to the bytenr of block 1. However
because this is a resumed snapshot deletion, we call into
check_ref_exists(). Because check_ref_exists() only looks at the disk,
it doesn't find the shared backref for the child of block 1, and thus
returns 0 and we skip deleting the reference for the child of block 1
and continue. This orphans the child of block 1.
The fix is to lookup the delayed refs, similar to what we do in
btrfs_lookup_extent_info(). However we only care about whether the
reference exists or not. If we fail to find our reference on disk, go
look up the bytenr in the delayed refs, and if it exists look for an
existing ref in the delayed ref head. If that exists then we know we
can delete the reference safely and carry on. If it doesn't exist we
know we have to skip over this block.
This bug has existed since I introduced this fix, however requires
having multiple deleted snapshots pending when we unmount. We noticed
this in production because our shutdown path stops the container on the
system, which deletes a bunch of subvolumes, and then reboots the box.
This gives us plenty of opportunities to hit this issue. Looking at the
history we've seen this occasionally in production, but we had a big
spike recently thanks to faster machines getting jobs with multiple
subvolumes in the job.
Chris Mason wrote a reproducer which does the following
mount /dev/nvme4n1 /btrfs
btrfs subvol create /btrfs/s1
simoop -E -f 4k -n 200000 -z /btrfs/s1
while(true) ; do
btrfs subvol snap /btrfs/s1 /btrfs/s2
simoop -f 4k -n 200000 -r 10 -z /btrfs/s2
btrfs subvol snap /btrfs/s2 /btrfs/s3
btrfs balance start -dusage=80 /btrfs
btrfs subvol del /btrfs/s2 /btrfs/s3
umount /btrfs
btrfsck /dev/nvme4n1 || exit 1
mount /dev/nvme4n1 /btrfs
done
On the second loop this would fail consistently, with my patch it has
been running for hours and hasn't failed.
I also used dm-log-writes to capture the state of the failure so I could
debug the problem. Using the existing failure case to test my patch
validated that it fixes the problem.
Fixes: 78c52d9eb6 ("btrfs: check for refs on snapshot delete resume")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The driver doesn't create any ALSA controls for firmware controls, so it
shouldn't be calling hda_cs_dsp_control_remove().
commit 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls for
firmware coefficients") removed the call to hda_cs_dsp_add_controls() but
didn't remove the call for destroying those controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls for firmware coefficients")
Link: https://patch.msgid.link/20240813110750.2814-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After napi_complete_done() is called when NAPI is polling in the current
process context, another NAPI may be scheduled and start running in
softirq on another CPU and may ring the doorbell before the current CPU
does. When combined with unnecessary rings when there is no need to arm
the CQ, it triggers error paths in the hardware.
This patch fixes this by calling napi_complete_done() after doorbell
rings. It limits the number of unnecessary rings when there is
no need to arm. MANA hardware specifies that there must be one doorbell
ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as
soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical
workloads, the 4 CQ wraparounds proves to be big enough that it rarely
exceeds this limit before all the napi weight is consumed.
To implement this, add a per-CQ counter cq->work_done_since_doorbell,
and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ.
Cc: stable@vger.kernel.org
Fixes: e1b5683ff6 ("net: mana: Move NAPI from EQ to CQ")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The copy_from_user() function returns the number of bytes which it
was not able to copy. Return -EFAULT instead.
Fixes: dee5a47cc7 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240612115040.2423290-4-dan.carpenter@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Panic if (un)share fails to maintain security.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmazVv8ACgkQ41TmuOI4
ufgTMA/+N3YMY9iC/4alFhYtOPOU7l3DFfRgSqBI4yGiTD0D9Fv9fnYrc3CQtAJ2
wlENGLMlmdPwmu8nttxOkPxqf7EmLdzyK4aNDHx5duSnYtF+Nrj0cqEKicCmqP3A
FRlfQVhXciX9N7uodEv99Xfbu5YzSibtg3/0aKB05qDS3uosTCpnQiyeu4ws2D19
F1KPFYxjmb9UvPCCUZ5zp0f05Mya+Ve+vLh4vRzTRhZqQpjyGW4NvwmoC1t27gGg
fA+sExVwTtIXhap7tna+pkUK1KJZQizDLQ6qh/xSfw7S58bHqHBT9qAqUsFSoNmC
5xEL/5ocupmF6dVrCRrogFi+bOW4wqUkZFcVsoQfsYCLYzIpme1Asw3YkME6L2pQ
ug7hjTHK6+ubRfIzIlmag8EYNt863h+/rbsN2I5wCkXVHvDaiqjvlzNSQ53mU4xK
OYcqBKtgysDlMKfs1VYhCGK5i8yr36IvG+i97C5y2wZ6IMZHr0k203xxLyCDiHWC
a7LnF+pMfKrmzKEiZ8DaPeGDzAx4k/yQpl7vG7Mu4bumtGoOJoXywk26F+9H6EXu
iuASOw7R/lf2b/CPAk6s8GnIQH1g0w0XAsiFwnx5MESl7F2Dyk2aALTPw0a7xvSk
pfrgNeVfzmNHWxyb2Gjiit4DyY+jsIp+J9ogIzBEJwiVakWW2Gk=
=PUqS
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
Fix invalid gisa designation value when gisa is not in use.
Panic if (un)share fails to maintain security.
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZrVPUBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFoCrAP9ZGQ1M7GdCe4Orm6Ex4R4OMVcz
MWMrFCVM73rnSoCbMwEA7le7M8c+X5i/4oqFOPm/fEr1i5RZT512RL5lc7MxBQ8=
=DG57
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.11, round #1
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
If snp_lookup_rmpentry() fails then "assigned" is printed in the error
message but it was never initialized. Initialize it to false.
Fixes: dee5a47cc7 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240612115040.2423290-3-dan.carpenter@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have a single patch for the next 6.11-rc which introduces a
workaround to ath12k which addresses a WCN7850 hardware issue that
prevents proper operation with unaligned transmit buffers.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZroXzBQcampvaG5zb25A
a2VybmVsLm9yZwAKCRAsFbugiYzLe5oCAQC9wYFSc9ZTtNFNQ8dWd8+d1raE4sQz
3kb7k2JxJr1bOQD/Y1ytd68C1XUw8KZpo1PcYCcAjNNHYYCBKMG7u0Oiygo=
=eueu
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20240812' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patch for v6.11
We have a single patch for the next 6.11-rc which introduces a
workaround to ath12k which addresses a WCN7850 hardware issue that
prevents proper operation with unaligned transmit buffers.
The code to lookup the scatter gather table entry assumed that it was
possible to use sg_virt() in order to lookup the DMA address in a mapped
scatter gather table. However, this assumption is incorrect as the DMA
mapping code may merge multiple entries into one. In that case, the DMA
address space may have e.g. two consecutive pages which is correctly
represented by the scatter gather list entry, however the virtual
addresses for these two pages may differ and the relationship cannot be
resolved anymore.
Avoid this problem entirely by working with the offset into the mapped
area instead of using virtual addresses. With that we only use the DMA
length and DMA address from the scatter gather list entries. The
underlying DMA/IOMMU code is therefore free to merge two entries into
one even if the virtual addresses space for the area is not continuous.
Fixes: 90db507552 ("wifi: iwlwifi: use already mapped data when TXing an AMSDU")
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/r/ZrNRoEbdkxkKFMBi@debian.local
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240812110640.460514-1-benjamin@sipsolutions.net
When disabling wifi mt7921_ipv6_addr_change() is called as a notifier.
At this point mvif->phy is already NULL so we cannot use it here.
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240812104542.80760-1-spasswolf@web.de
Fix a recently introduced build failure.
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240805232026.65087-2-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In RS485 mode, the RTS pin is driven high by hardware when the transmitter
is operating. This behaviour cannot be changed. This means that the driver
should claim that it supports SER_RS485_RTS_ON_SEND and not
SER_RS485_RTS_AFTER_SEND.
Otherwise, when configuring the port with the SER_RS485_RTS_ON_SEND, one
get the following warning:
kern.warning kernel: atmel_usart_serial atmel_usart_serial.2.auto:
ttyS1 (1): invalid RTS setting, using RTS_AFTER_SEND instead
which is contradictory with what's really happening.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Cc: stable <stable@kernel.org>
Tested-by: Alexander Dahl <ada@thorsis.com>
Fixes: af47c491e3 ("serial: atmel: Fill in rs485_supported")
Link: https://lore.kernel.org/r/20240808060637.19886-1-othacehe@gnu.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6e20753da6 ("tty: vt: conmakehash: cope with abs_srctree no
longer in env") included <linux/limits.h>, which invoked another
(wrong) patch that tried to address a build error on macOS.
According to the specification [1], the correct header to use PATH_MAX
is <limits.h>.
The minimal fix would be to replace <linux/limits.h> with <limits.h>.
However, the following commits seem questionable to me:
- 3bd85c6c97 ("tty: vt: conmakehash: Don't mention the full path of the input in output")
- 6e20753da6 ("tty: vt: conmakehash: cope with abs_srctree no longer in env")
These commits made too many efforts to cope with a comment header in
drivers/tty/vt/consolemap_deftbl.c:
/*
* Do not edit this file; it was automatically generated by
*
* conmakehash drivers/tty/vt/cp437.uni > [this file]
*
*/
With this commit, the header part of the generate C file will be
simplified as follows:
/*
* Automatically generated file; Do not edit.
*/
BTW, another series of excessive efforts for a comment header can be
seen in the following:
- 5ef6dc08cf ("lib/build_OID_registry: don't mention the full path of the script in output")
- 2fe29fe945 ("lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat")
[1]: https://pubs.opengroup.org/onlinepubs/009695399/basedefs/limits.h.html
Fixes: 6e20753da6 ("tty: vt: conmakehash: cope with abs_srctree no longer in env")
Cc: stable <stable@kernel.org>
Reported-by: Daniel Gomez <da.gomez@samsung.com>
Closes: https://lore.kernel.org/all/20240807-macos-build-support-v1-11-4cd1ded85694@samsung.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240809160853.1269466-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel
sometimes boot hang. It is because normal console still is not ready,
but runtime suspend is called, so early console putchar will hang
in waiting TRDE set in UARTSTAT.
The lpuart driver has auto suspend delay set to 3000ms, but during
uart_add_one_port, a child device serial ctrl will added and probed with
its pm runtime enabled(see serial_ctrl.c).
The runtime suspend call path is:
device_add
|-> bus_probe_device
|->device_initial_probe
|->__device_attach
|-> pm_runtime_get_sync(dev->parent);
|-> pm_request_idle(dev);
|-> pm_runtime_put(dev->parent);
So in the end, before normal console ready, the lpuart get runtime
suspended. And earlycon putchar will hang.
To address the issue, mark last busy just after pm_runtime_enable,
three seconds is long enough to switch from bootconsole to normal
console.
Fixes: 43543e6f53 ("tty: serial: fsl_lpuart: Add runtime pm support")
Cc: stable <stable@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240808140325.580105-1-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add LJCA GPIO support for the Lunar Lake platform.
New HID taken from out of tree ivsc-driver git repo.
Link: 47e7c4a446
Cc: stable <stable@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812095038.555837-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit bf20c69cf3.
During tcpm_init() stage, if the VBUS is still present after
tcpm_reset_port(), then we assume that VBUS will off and goto safe0v
after a specific discharge time. Following a TCPM_VBUS_EVENT event if
VBUS reach to off state. TCPM_VBUS_EVENT event may be set during
PORT_RESET handling stage. If pd_events reset to 0 after TCPM_VBUS_EVENT
set, we will lost this VBUS event. Then the port state machine may stuck
at one state.
Before:
[ 2.570172] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[ 2.570179] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 2.570182] pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS]
[ 3.490213] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [delayed 920 ms]
[ 3.490220] Start toggling
[ 3.546050] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected]
[ 3.546057] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
After revert this patch, we can see VBUS off event and the port will goto
expected state.
[ 2.441992] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[ 2.441999] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 2.442002] pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS]
[ 2.442122] VBUS off
[ 2.442125] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev1 NONE_AMS]
[ 2.442127] VBUS VSAFE0V
[ 2.442351] CC1: 0 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected]
[ 2.442357] Start toggling
[ 2.491850] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected]
[ 2.491858] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 2.491863] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms [rev1 NONE_AMS]
[ 2.691905] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms]
Fixes: bf20c69cf3 ("usb: typec: tcpm: clear pd_event queue in PORT_RESET")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240809112901.535072-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The command execution routines need to return the amount of
data that was transferred when succesful.
This fixes an issue where the alternate modes and the power
delivery capabilities are not getting registered.
Fixes: 5e9c1662a8 ("usb: typec: ucsi: rework command execution functions")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240809150343.286942-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stall handling is managed in the 'process_*' functions, which are called
right before the 'goto' stall handling code snippet. Thus, there should
be a return after the 'process_*' functions. Otherwise, the stall code may
run twice.
Fixes: 1b349f214a ("usb: xhci: add 'goto' for halted endpoint check in handle_tx_event()")
Reported-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240809124408.505786-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop
up the damage. If it fails early enough, before xhci->interrupters
is allocated but after xhci->max_interrupters has been set, which
happens in most (all?) cases, things get uglier, as xhci_mem_cleanup()
unconditionally derefences xhci->interrupters. With prejudice.
Gate the interrupt freeing loop with a check on xhci->interrupters
being non-NULL.
Found while debugging a DMA allocation issue that led the XHCI driver
on this exact path.
Fixes: c99b38c412 ("xhci: add support to allocate several interrupters")
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Wesley Cheng <quic_wcheng@quicinc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org # 6.8+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240809124408.505786-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes following USB4/Thunderbolt fixes for v6.11-rc3:
- Fix memory leak in debugfs sideband register access
- Fix hang when host router NVM is upgraded and there is another host
connected.
Both have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAma0iwIgHG1pa2Eud2Vz
dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKCUrg/+N6mol2K6ndU+
fcHTWPO/IRRyJ8vqfm3EaWgazZoj493va0gulATslaSBFcbz2zNXnNm9UIWl1eJX
1PM4R8SIhuIomkp3alAMjV08Do3XcexDtTay9xrRVLclk6lu1/cu6QbgViKQikoD
eAHvW4iLguGqcV5v1sJFOl7io3+P15rV9F39kL8YvaKhNLL7QEoyLguz9mTdEjgc
Yvk/AK4LShr5u71xHzEPnY20XFQmDZLPP5sWrHnluKYmLKvRTWb9pKYyi8mKxL5D
xiu2HsaGOkeZImU/tuFMiwq4wlz1hOcffn2tPpwbGF/sp12Jk/GyudyKNHNdwqIr
TTrzZXAJ8YyBtUhsaLGAkuREVPm2ENl94Ww0i9BNVua2RVweHLCWYZ+wdSCYhM/W
ID53So0FO/4+lhX774blmT5+hVhDTrrh/WbjRVnl5JMLaUViCygthSOlQiaR8SPH
hJZ5CVP/Kq4QK1EDVj6hCu1uXX8FNaPLgBbt+kjuthWg2dnROB4EFR69V6TDBJpg
MBJBgD9BdiCNOMkdNuKqwb+h/UAq+Xda4d8Mj/Gt2b6t2/4CoDB3bhNsgjPNH4KO
CsVF6TEE94NjurKWuruYx9pTRr0b0VlXfratV76jFB/EQJt0tVdF7WTgx6+qrbz+
2x8FgUuJ74+IQEawXVJfPK9T8LUjcek=
=qXlw
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.11-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
thunderbolt: Fixes for v6.11-rc3
This includes following USB4/Thunderbolt fixes for v6.11-rc3:
- Fix memory leak in debugfs sideband register access
- Fix hang when host router NVM is upgraded and there is another host
connected.
Both have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.11-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
