Currently, all packets injected into Ocelot switches are classified to
VLAN 0, regardless of whether they are VLAN-tagged or not. This is
because the switch only looks at the VLAN TCI from the DSA tag.
VLAN 0 is then stripped on egress due to REW_TAG_CFG_TAG_CFG. There are
2 cases really, below is the explanation for ocelot_port_set_native_vlan:
- Port is VLAN-aware, we set REW_TAG_CFG_TAG_CFG to 1 (egress-tag all
frames except VID 0 and the native VLAN) if a native VLAN exists, or
to 3 otherwise (tag all frames, including VID 0).
- Port is VLAN-unaware, we set REW_TAG_CFG_TAG_CFG to 0 (port tagging
disabled, classified VLAN never appears in the packet).
One can already see an inconsistency: when a native VLAN exists, VID 0
is egress-untagged, but when it doesn't, VID 0 is egress-tagged.
So when we do this:
ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0
bridge vlan del dev swp0 vid 1
bridge vlan add dev swp0 vid 1 pvid # but not untagged
and we ping through swp0, packets will look like this:
MAC > 33:33:00:00:00:02, ethertype 802.1Q (0x8100): vlan 0, p 0,
ethertype 802.1Q (0x8100), vlan 1, p 0, ethertype IPv6 (0x86dd),
ICMP6, router solicitation, length 16
So VID 1 frames (sent that way by the Linux bridge) are encapsulated in
a VID 0 header - the classified VLAN of the packets as far as the hw is
concerned. To avoid that, what we really need to do is stop injecting
packets using the classified VLAN of 0.
This patch strips the VLAN header from the skb payload, if that VLAN
exists and if the port is under a VLAN-aware bridge. Then it copies that
VLAN header into the DSA injection frame header.
A positive side effect is that VCAP ES0 VLAN rewriting rules now work
for packets injected from the CPU into a port that's under a VLAN-aware
bridge, and we are able to match those packets by the VLAN ID that was
sent by the network stack, and not by VLAN ID 0.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VLAN TCI contains more than the VLAN ID, it also has the VLAN PCP
and Drop Eligibility Indicator.
If the ocelot driver is going to write the VLAN header inside the DSA
tag, it could just as well write the entire TCI.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the ocelot driver does support the 'vlan modify' action, but
in the ingress chain, and it is offloaded to VCAP IS1. This action
changes the classified VLAN before the packet enters the bridging
service, and the bridging works with the classified VLAN modified by
VCAP IS1.
That is good for some use cases, but there are others where the VLAN
must be modified at the stage of the egress port, after the packet has
exited the bridging service. One example is simulating IEEE 802.1CB
active stream identification filters ("active" means that not only the
rule matches on a packet flow, but it is also able to change some
headers). For example, a stream is replicated on two egress ports, but
they must have different VLAN IDs on egress ports A and B.
This seems like a task for the VCAP ES0, but that currently only
supports pushing the ES0 tag A, which is specified in the rule. Pushing
another VLAN header is not what we want, but rather overwriting the
existing one.
It looks like when we push the ES0 tag A, it is actually possible to not
only take the ES0 tag A's value from the rule itself (VID_A_VAL), but
derive it from the following formula:
ES0_TAG_A = Classified VID + VID_A_VAL
Otherwise said, ES0_TAG_A can be used to increment with a given value
the VLAN ID that the packet was already classified to, and the packet
will have this value as an outer VLAN tag. This new VLAN ID value then
gets stripped on egress (or not) according to the value of the native
VLAN from the bridging service.
While the hardware will happily increment the classified VLAN ID for all
packets that match the ES0 rule, in practice this would be rather
insane, so we only allow this kind of ES0 action if the ES0 filter
contains a VLAN ID too, so as to restrict the matching on a known
classified VLAN. If we program VID_A_VAL with the delta between the
desired final VLAN (ES0_TAG_A) and the classified VLAN, we obtain the
desired behavior.
It doesn't look like it is possible with the tc-vlan action to modify
the VLAN ID but not the PCP. In hardware it is possible to leave the PCP
to the classified value, but we unconditionally program it to overwrite
it with the PCP value from the rule.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
napi_gro_complete always returned the same value, NET_RX_SUCCESS
And the value was not used anywhere
Signed-off-by: Gyumin Hwang <hkm73560@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: housekeeping updates
These are a few changes for code clean up and a couple
more lock management tweaks.
v2: rebased
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the lif parameter for use in an error message, and
to better match the style of most of the functions calls.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the code a little by keeping the send_to_hw decision
inside of ionic_qcq_disable rather than in the callers. Also,
add ENXIO to the decision expression.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split the adminq wait into smaller polling periods in order
to watch for broken firmware and not have to wait for the full
adminq devcmd_timeout.
Generally, adminq commands take fewer than 2 msecs. If the
FW is busy they can take longer, but usually still under 100
msecs. We set the polling period to 100 msecs in order to
start snooping on FW status when a command is taking longer
than usual.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Widen the coverage of the queue_lock to be sure the lif init
and lif deinit actions are protected. This addresses a hang
seen when a Tx Timeout action was attempted at the same time
as a FW Reset was started.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move creation and deletion of lif mutex a level out to
lif creation and delete, rather than in init and deinit.
This assures that nothing will get hung if anything is waiting
on the mutex while the driver is clearing the lif while handling
the fw_down/fw_up cycle.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the PCI connection is broken, reading the FW version string
will only get 0xff bytes, which shouldn't get printed. This
checks the first byte and prints only the first 4 bytes
if non-ASCII.
Also, add a limit to the string length printed when a valid
string is found, just in case it is not properly terminated.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
These debug stats are not really useful, their collection is
likely detrimental to performance, and they suck up a lot
of memory which never gets used if no one ever enables the
priv-flag to print them, so just remove these bits.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biju Das says:
====================
Fillup stubs for Gigabit Ethernet driver support
The DMAC and EMAC blocks of Gigabit Ethernet IP found on RZ/G2L SoC are
similar to the R-Car Ethernet AVB IP.
The Gigabit Ethernet IP consists of Ethernet controller (E-MAC), Internal
TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller
(DMAC).
With a few changes in the driver we can support both IPs.
This patch series is for adding Gigabit ethernet driver support to RZ/G2L SoC.
The number of patches after incorporatng RFC review comments is 18.
So split the patches into 2 patchsets (10 + 8).
This series is the second patchset, aims to fillup all the stubs for the
Gigabit Ethernet driver.
This patch series depend upon [1]
[1] https://lore.kernel.org/linux-renesas-soc/20211001150636.7500-1-biju.das.jz@bp.renesas.com/T/#t
RFC->V1:
* used rx_max_buf_size instead of rx_2k_buffers feature bit.
* renamed "rgeth" to "gbeth".
* renamed ravb_rx_ring_free to ravb_rx_ring_free_rcar
* renamed ravb_rx_ring_format to ravb_rx_ring_format_rcar
* renamed ravb_alloc_rx_desc to ravb_alloc_rx_desc_rcar
* renamed ravb_rcar_rx to ravb_rx_rcar
* Added Sergey's Rb tag for patch #6.
* Moved CSR0 initialization to patch #8.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize GbEthernet E-MAC found on RZ/G2L SoC.
This patch also renames ravb_set_rate to ravb_set_rate_rcar and
ravb_rcar_emac_init to ravb_emac_init_rcar to be consistent with
the naming convention used in sh_eth driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RZ/G2L supports half duplex mode.
Add a half_duplex hw feature bit to struct ravb_hw_info for
supporting half duplex mode for RZ/G2L.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
E-MAC on R-Car supports magic packet detection, whereas RZ/G2L
does not support this feature. Add magic_pkt to struct ravb_hw_info
and enable this feature only for R-Car.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
R-Car AVB-DMAC has 4 Transmit start request queues, whereas
RZ/G2L has only 1 Transmit start request queue.
Add a tsrq variable to struct ravb_hw_info to handle this
difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
R-Car supports gPTP feature whereas RZ/G2L does not support it.
This patch excludes gtp feature support for RZ/G2L.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize GbEthernet DMAC found on RZ/G2L SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RZ/G2L SoC has Gigabit Ethernet IP consisting of Ethernet controller
(E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct
memory access controller (DMAC).
This patch adds compatible string for RZ/G2L and fills up the
ravb_hw_info struct. Function stubs are added which will be used by
gbeth_hw_info and will be filled incrementally.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
R-Car supports network control queue whereas RZ/G2L does not support
it. Add nc_queue to struct ravb_hw_info, so that NC queue is handled
only by R-Car.
This patch also renames ravb_rcar_dmac_init to ravb_dmac_init_rcar
to be consistent with the naming convention used in sh_eth driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the variable "no_ptp_cfg_active" with "gptp" and
"ptp_cfg_active" with "ccc_gac" to match the HW features.
There is no functional change.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar" and
replace the function pointer "set_rx_csum_feature" with "set_feature".
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
bpf-next 2021-10-02
We've added 85 non-merge commits during the last 15 day(s) which contain
a total of 132 files changed, 13779 insertions(+), 6724 deletions(-).
The main changes are:
1) Massive update on test_bpf.ko coverage for JITs as preparatory work for
an upcoming MIPS eBPF JIT, from Johan Almbladh.
2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool,
with driver support for i40e and ice from Magnus Karlsson.
3) Add legacy uprobe support to libbpf to complement recently merged legacy
kprobe support, from Andrii Nakryiko.
4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky.
5) Support saving the register state in verifier when spilling <8byte bounded
scalar to the stack, from Martin Lau.
6) Add libbpf opt-in for stricter BPF program section name handling as part
of libbpf 1.0 effort, from Andrii Nakryiko.
7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov.
8) Fix skel_internal.h to propagate errno if the loader indicates an internal
error, from Kumar Kartikeya Dwivedi.
9) Fix build warnings with -Wcast-function-type so that the option can later
be enabled by default for the kernel, from Kees Cook.
10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it
otherwise errors out when encountering them, from Toke Høiland-Jørgensen.
11) Teach libbpf to recognize specialized maps (such as for perf RB) and
internally remove BTF type IDs when creating them, from Hengqi Chen.
12) Various fixes and improvements to BPF selftests.
====================
Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
prevent_wake logic is backward since what it is really checking is
if the device may wakeup the system or not, not that it will prevent
the to be awaken.
Also looking on how other subsystems have the entry as power/wakeup
this also renames the force_prevent_wake to force_wakeup in vhci driver.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
napi_busy_loop() disables preemption and performs a NAPI poll. We can't acquire
sleeping locks with disabled preemption which would be required while
__napi_poll() invokes the callback of the driver.
A threaded interrupt performing the NAPI-poll can be preempted on PREEMPT_RT.
A RT thread on another CPU may observe NAPIF_STATE_SCHED bit set and busy-spin
until it is cleared or its spin time runs out. Given it is the task with the
highest priority it will never observe the NEED_RESCHED bit set.
In this case the time is better spent by simply sleeping.
The NET_RX_BUSY_POLL is disabled by default (the system wide sysctls for
poll/read are set to zero). Disabling NET_RX_BUSY_POLL on PREEMPT_RT to avoid
wrong locking context in case it is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20211001145841.2308454-1-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hengqi Chen says:
====================
Currently a bunch of (usually pretty specialized) BPF maps do not support
specifying BTF types for they key and value. For such maps, specifying
their definition like this:
struct {
__uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
__type(key, int);
__type(value, int);
} my_perf_buf SEC(".maps");
Would actually produce warnings about retrying BPF map creation without BTF.
Users are forced to know such nuances and use __uint(key_size, 4) instead.
This is non-uniform, annoying, and inconvenient.
This patch set teaches libbpf to recognize those specialized maps and removes
BTF type IDs when creating BPF map. Also, update existing BPF selftests to
exericse this change.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
A bunch of BPF maps do not support specifying BTF types for key and value.
This is non-uniform and inconvenient[0]. Currently, libbpf uses a retry
logic which removes BTF type IDs when BPF map creation failed. Instead
of retrying, this commit recognizes those specialized maps and removes
BTF type IDs when creating BPF map.
[0] Closes: https://github.com/libbpf/libbpf/issues/355
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210930161456.3444544-2-hengqi.chen@gmail.com
Misc mlx5 updates:
1) SW steering, Vports handling and SFs support
From Yevgeny Kliteynik
======================
This patch series deals with vport handling in SW steering.
For every vport, SW steering queries FW for this vport's properties,
such as RX/TX ICM addresses to be able to add this vport as dest action.
The following patches rework vport capabilities managements and add support
for Scalable Functions (SFs).
- Patch 1 fixes the vport number data type all over the DR code to 16 bits
in accordance with HW spec.
- Patch 2 replaces local SW steering WIRE_PORT macro with the existing
mlx5 define.
- Patch 3 adds missing query for vport 0 and and handles eswitch manager
capabilities for ECPF (BlueField in embedded CPU mode).
- Patch 4 fixes error messages for failure to obtain vport caps from
different locations in the code to have the same verbosity level and
similar wording.
- Patch 5 adds support for csum recalculation flow tables on SFs: it
implements these FTs management in XArray instead of the fixed size array,
thus adding support for csum recalculation table for any valid vport.
- Patch 6 is the main patch of this whole series: it refactors vports
capabilities handling and adds SFs support.
======================
2) Minor and trivial updates and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmFWReYACgkQSD+KveBX
+j7GQAgAkCiEDAOY2WhZIf2Z1L9pOqLCKjT5yjbsbncMmBgMlxe5WPuQaDUiLLqC
ihKYpmrHerimx796W6lPlaNUHS0eX4MHNRJgRU5nZhp6MjTrP9rjFav/oEHtdl/n
TpZJEbxZwttBTdNMZLalnI4EVOdzpGpEuxe+YMWu38moUH+sovboXyFqA6Clhc6X
ofsjgx/C79lMppKT6TaC04zsFawG8MOUEHNvpZ6btAfL2RT7Oxgy7/uccsRAe4l+
GUqCcx1zXX/dNNMPTFjpu09guSzxFMAtSD24cRX+bX/UpU3XJBplmuvW0EKahpOC
k/eGul4f75FU3eAnJRyUNRgXg6oQeg==
=QN9O
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-09-30
1) From Yevgeny Kliteynik:
This patch series deals with vport handling in SW steering.
For every vport, SW steering queries FW for this vport's properties,
such as RX/TX ICM addresses to be able to add this vport as dest action.
The following patches rework vport capabilities managements and add support
for Scalable Functions (SFs).
- Patch 1 fixes the vport number data type all over the DR code to 16 bits
in accordance with HW spec.
- Patch 2 replaces local SW steering WIRE_PORT macro with the existing
mlx5 define.
- Patch 3 adds missing query for vport 0 and and handles eswitch manager
capabilities for ECPF (BlueField in embedded CPU mode).
- Patch 4 fixes error messages for failure to obtain vport caps from
different locations in the code to have the same verbosity level and
similar wording.
- Patch 5 adds support for csum recalculation flow tables on SFs: it
implements these FTs management in XArray instead of the fixed size array,
thus adding support for csum recalculation table for any valid vport.
- Patch 6 is the main patch of this whole series: it refactors vports
capabilities handling and adds SFs support.
2) Minor and trivial updates and cleanups
* tag 'mlx5-updates-2021-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Use array_size() helper
net/mlx5: Use struct_size() helper in kvzalloc()
net/mlx5: Use kvcalloc() instead of kvzalloc()
net/mlx5: Tolerate failures in debug features while driver load
net/mlx5: Warn for devlink reload when there are VFs alive
net/mlx5: DR, Add missing string for action type SAMPLER
net/mlx5: DR, init_next_match only if needed
net/mlx5: DR, Fix typo 'offeset' to 'offset'
net/mlx5: DR, Increase supported num of actions to 32
net/mlx5: DR, Add support for SF vports
net/mlx5: DR, Support csum recalculation flow table on SFs
net/mlx5: DR, Align error messages for failure to obtain vport caps
net/mlx5: DR, Add missing query for vport 0
net/mlx5: DR, Replace local WIRE_PORT macro with the existing MLX5_VPORT_UPLINK
net/mlx5: DR, Fix vport number data type to u16
====================
Link: https://lore.kernel.org/r/20210930232050.41779-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a set of tests of BPF_LDX_MEM where both operand registers
are the same register. Mainly testing 32-bit JITs that may load a 64-bit
value in two 32-bit loads, and must not overwrite the address register.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-11-johan.almbladh@anyfinetworks.com
This patch adds a tests of ALU32 and ALU64 LSH/RSH/ARSH operations for the
case when the two operands are the same register. Mainly intended to test
JITs that implement ALU64 shifts with 32-bit CPU instructions.
Also renamed related helper functions for consistency with the new tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-10-johan.almbladh@anyfinetworks.com
This patch replaces the current register combination test with new
exhaustive tests. Before, only a subset of register combinations was
tested for ALU64 DIV. Now, all combinatons of operand registers are
tested, including the case when they are the same, and for all ALU32
and ALU64 operations.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-8-johan.almbladh@anyfinetworks.com
This patch moves the ALU LSH/RSH/ARSH reference computations into the
common reference value function. Also fix typo in constants so they
now have the intended values.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-7-johan.almbladh@anyfinetworks.com
This patch expands the register-clobbering-during-function-call tests
to cover more all ALU32/64 MUL, DIV and MOD operations and all ATOMIC
operations. In short, if a JIT implements a complex operation with
a call to an external function, it must make sure to save and restore
all its caller-saved registers that may be clobbered by the call.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-6-johan.almbladh@anyfinetworks.com
This patch adds tests to check that the source register is preserved when
zero-extending a 32-bit value. In particular, it checks that the source
operand is not zero-extended in-place.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-5-johan.almbladh@anyfinetworks.com
This patch adds a series of test to verify the operation of BPF_ATOMIC
with BPF_DW and BPF_W sizes, for all power-of-two magnitudes of the
register value operand.
Also fixes a confusing typo in the comment for a related test.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-4-johan.almbladh@anyfinetworks.com
This patch updates the existing tests of BPF_ATOMIC operations to verify
that a 32-bit register operand is properly zero-extended. In particular,
it checks the operation on archs that require 32-bit operands to be
properly zero-/sign-extended or the result is undefined, e.g. MIPS64.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-3-johan.almbladh@anyfinetworks.com
This patch adds a series of tests to verify the behavior of BPF_LDX and
BPF_STX with BPF_B//W sizes in isolation. In particular, it checks that
BPF_LDX zero-extendeds the result, and that BPF_STX does not overwrite
adjacent bytes in memory.
BPF_ST and operations on BPF_DW size are deemed to be sufficiently
tested by existing tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-2-johan.almbladh@anyfinetworks.com
Some architectures do not include uapi/asm/socket.h
Fixes: 2bb2f5fb21 ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 4f42ad2011, reversing
changes made to ea2dd331bf.
These chanfges break the build when mctp is modular.
Signed-off-by: David S. Miller <davem@davemloft.net>
Each region has an independently configurable number of maximum
snapshots. This information is not reported to userspace, making it not
very discoverable. Fix this by adding a new
DEVLINK_ATTR_REGION_MAX_SNAPSHOST attribute which is used to report this
maximum.
Ex:
$devlink region
pci/0000:af:00.0/nvm-flash: size 10485760 snapshot [] max 1
pci/0000:af:00.0/device-caps: size 4096 snapshot [] max 10
pci/0000:af:00.1/nvm-flash: size 10485760 snapshot [] max 1
pci/0000:af:00.1/device-caps: size 4096 snapshot [] max 10
This information enables users to understand why a new region command
may fail due to having too many existing snapshots.
Reported-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeremy Kerr says:
====================
MCTP kunit tests
This change adds some initial kunit tests for the MCTP core. We'll
expand the coverage in a future series, and augment with a few
selftests, but this establishes a baseline set of tests for now.
Thanks to the kunit folks for the framework!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add multi-packet route input tests, for message reassembly. These will
feed packets to be received by a bound socket, or dropped.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a few tests for single-packet route inputs, testing the
mctp_route_input function.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a few tests for the initial packet ingress through
mctp_pkttype_receive function; mainly packet header sanity checks. Full
input routing checks will be added as a separate change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
