The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Pull thermal management updates from Zhang Rui:
"There are not too many changes this time, except two new platform
thermal drivers, ti-soc-thermal driver and x86_pkg_temp_thermal
driver, and a couple of small fixes.
Highlights:
- move the ti-soc-thermal driver out of the staging tree to the
thermal tree.
- introduce the x86_pkg_temp_thermal driver. This driver registers
CPU digital temperature package level sensor as a thermal zone.
- small fixes/cleanups including removing redundant use of
platform_set_drvdata() and of_match_ptr for all platform thermal
drivers"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits)
thermal: cpu_cooling: fix stub function
thermal: ti-soc-thermal: use standard GPIO DT bindings
thermal: MAINTAINERS: Add git tree path for SoC specific updates
thermal: fix x86_pkg_temp_thermal.c build and Kconfig
Thermal: Documentation for x86 package temperature thermal driver
Thermal: CPU Package temperature thermal
thermal: consider emul_temperature while computing trend
thermal: ti-soc-thermal: add DT example for DRA752 chip
thermal: ti-soc-thermal: add dra752 chip to device table
thermal: ti-soc-thermal: add thermal data for DRA752 chips
thermal: ti-soc-thermal: remove usage of IS_ERR_OR_NULL
thermal: ti-soc-thermal: freeze FSM while computing trend
thermal: ti-soc-thermal: remove external heat while extrapolating hotspot
thermal: ti-soc-thermal: update DT reference for OMAP5430
x86, mcheck, therm_throt: Process package thresholds
thermal: cpu_cooling: fix 'descend' check in get_property()
Thermal: spear: Remove redundant use of of_match_ptr
Thermal: kirkwood: Remove redundant use of of_match_ptr
Thermal: dove: Remove redundant use of of_match_ptr
Thermal: armada: Remove redundant use of of_match_ptr
...
Pull perf fixes from Ingo Molnar:
"Two small fixlets"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix interrupt handler timing harness
perf/x86/amd: Do not print an error when the device is not present
Pull drm updates from Dave Airlie:
"Okay this is the big one, I was stalled on the fbdev pull req as I
stupidly let fbdev guys merge a patch I required to fix a warning with
some patches I had, they ended up merging the patch from the wrong
place, but the warning should be fixed. In future I'll just take the
patch myself!
Outside drm:
There are some snd changes for the HDMI audio interactions on haswell,
they've been acked for inclusion via my tree. This relies on the
wound/wait tree from Ingo which is already merged.
Major changes:
AMD finally released the dynamic power management code for all their
GPUs from r600->present day, this is great, off by default for now but
also a huge amount of code, in fact it is most of this pull request.
Since it landed there has been a lot of community testing and Alex has
sent a lot of fixes for any bugs found so far. I suspect radeon might
now be the biggest kernel driver ever :-P p.s. radeon.dpm=1 to enable
dynamic powermanagement for anyone.
New drivers:
Renesas r-car display unit.
Other highlights:
- core: GEM CMA prime support, use new w/w mutexs for TTM
reservations, cursor hotspot, doc updates
- dvo chips: chrontel 7010B support
- i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell),
Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp
support (this time for sure)
- nouveau: async buffer object deletion, context/register init
updates, kernel vp2 engine support, GF117 support, GK110 accel
support (with external nvidia ucode), context cleanups.
- exynos: memory leak fixes, Add S3C64XX SoC series support, device
tree updates, common clock framework support,
- qxl: cursor hotspot support, multi-monitor support, suspend/resume
support
- mgag200: hw cursor support, g200 mode limiting
- shmobile: prime support
- tegra: fixes mostly
I've been banging on this quite a lot due to the size of it, and it
seems to okay on everything I've tested it on."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits)
drm/radeon/dpm: implement vblank_too_short callback for si
drm/radeon/dpm: implement vblank_too_short callback for cayman
drm/radeon/dpm: implement vblank_too_short callback for btc
drm/radeon/dpm: implement vblank_too_short callback for evergreen
drm/radeon/dpm: implement vblank_too_short callback for 7xx
drm/radeon/dpm: add checks against vblank time
drm/radeon/dpm: add helper to calculate vblank time
drm/radeon: remove stray line in old pm code
drm/radeon/dpm: fix display_gap programming on rv7xx
drm/nvc0/gr: fix gpc firmware regression
drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
drm/radeon/dpm: implement force performance level for TN
drm/radeon/dpm: implement force performance level for ON/LN
drm/radeon/dpm: implement force performance level for SI
drm/radeon/dpm: implement force performance level for cayman
drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
drm/radeon/dpm: add infrastructure to force performance levels
drm/radeon: fix surface setup on r1xx
drm/radeon: add support for 3d perf states on older asics
drm/radeon: set default clocks for SI when DPM is disabled
...
As Linus said its not an error to not have an AMD IOMMU; esp.
when you're not even running on an AMD platform.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/20130703075542.GF23916@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull trivial tree updates from Jiri Kosina:
"The usual stuff from trivial tree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
treewide: relase -> release
Documentation/cgroups/memory.txt: fix stat file documentation
sysctl/net.txt: delete reference to obsolete 2.4.x kernel
spinlock_api_smp.h: fix preprocessor comments
treewide: Fix typo in printk
doc: device tree: clarify stuff in usage-model.txt.
open firmware: "/aliasas" -> "/aliases"
md: bcache: Fixed a typo with the word 'arithmetic'
irq/generic-chip: fix a few kernel-doc entries
frv: Convert use of typedef ctl_table to struct ctl_table
sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
doc: clk: Fix incorrect wording
Documentation/arm/IXP4xx fix a typo
Documentation/networking/ieee802154 fix a typo
Documentation/DocBook/media/v4l fix a typo
Documentation/video4linux/si476x.txt fix a typo
Documentation/virtual/kvm/api.txt fix a typo
Documentation/early-userspace/README fix a typo
Documentation/video4linux/soc-camera.txt fix a typo
lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
...
Merge first patch-bomb from Andrew Morton:
- various misc bits
- I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been
distracted. There has been quite a bit of activity.
- About half the MM queue
- Some backlight bits
- Various lib/ updates
- checkpatch updates
- zillions more little rtc patches
- ptrace
- signals
- exec
- procfs
- rapidio
- nbd
- aoe
- pps
- memstick
- tools/testing/selftests updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits)
tools/testing/selftests: don't assume the x bit is set on scripts
selftests: add .gitignore for kcmp
selftests: fix clean target in kcmp Makefile
selftests: add .gitignore for vm
selftests: add hugetlbfstest
self-test: fix make clean
selftests: exit 1 on failure
kernel/resource.c: remove the unneeded assignment in function __find_resource
aio: fix wrong comment in aio_complete()
drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode
drivers/memstick/host/r592.c: convert to module_pci_driver
drivers/memstick/host/jmb38x_ms: convert to module_pci_driver
pps-gpio: add device-tree binding and support
drivers/pps/clients/pps-gpio.c: convert to module_platform_driver
drivers/pps/clients/pps-gpio.c: convert to devm_* helpers
drivers/parport/share.c: use kzalloc
Documentation/accounting/getdelays.c: avoid strncpy in accounting tool
aoe: update internal version number to v83
aoe: update copyright date
aoe: perform I/O completions in parallel
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Dm06
-----END PGP SIGNATURE-----
Merge tag 'please-pull-mce-therm' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull thermal power-limit update from Tony Luck:
"Thermal limit warnings are too scary and cause unnecessary concern"
* tag 'please-pull-mce-therm' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
x86 thermal: Disable power limit notification interrupt by default
x86 thermal: Delete power-limit-notification console messages
Pull x86 tracing updates from Ingo Molnar:
"This tree adds IRQ vector tracepoints that are named after the handler
and which output the vector #, based on a zero-overhead approach that
relies on changing the IDT entries, by Seiji Aguchi.
The new tracepoints look like this:
# perf list | grep -i irq_vector
irq_vectors:local_timer_entry [Tracepoint event]
irq_vectors:local_timer_exit [Tracepoint event]
irq_vectors:reschedule_entry [Tracepoint event]
irq_vectors:reschedule_exit [Tracepoint event]
irq_vectors:spurious_apic_entry [Tracepoint event]
irq_vectors:spurious_apic_exit [Tracepoint event]
irq_vectors:error_apic_entry [Tracepoint event]
irq_vectors:error_apic_exit [Tracepoint event]
[...]"
* 'x86-tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tracing: Add config option checking to the definitions of mce handlers
trace,x86: Do not call local_irq_save() in load_current_idt()
trace,x86: Move creation of irq tracepoints from apic.c to irq.c
x86, trace: Add irq vector tracepoints
x86: Rename variables for debugging
x86, trace: Introduce entering/exiting_irq()
tracing: Add DEFINE_EVENT_FN() macro
Pull x86 RAS update from Ingo Molnar:
"The changes in this tree are:
- ACPI APEI (ACPI Platform Error Interface) improvements, by Chen
Gong
- misc MCE fixes/cleanups"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Update MCE severity condition check
mce: acpi/apei: Add comments to clarify usage of the various bitfields in the MCA subsystem
ACPI/APEI: Update einj documentation for param1/param2
ACPI/APEI: Add parameter check before error injection
ACPI, APEI, EINJ: Fix error return code in einj_init()
x86, mce: Fix "braodcast" typo
Pull x86 mm changes from Ingo Molnar:
"Misc improvements:
- Fix /proc/mtrr reporting
- Fix ioremap printout
- Remove the unused pvclock fixmap entry on 32-bit
- misc cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Correct function name output
x86: Fix /proc/mtrr with base/size more than 44bits
ix86: Don't waste fixmap entries
x86/mm: Drop unneeded include <asm/*pgtable, page*_types.h>
x86_64: Correct phys_addr in cleanup_highmap comment
Pull x86 FPU changes from Ingo Molnar:
"There are two bigger changes in this tree:
- Add an [early-use-]safe static_cpu_has() variant and other
robustness improvements, including the new X86_DEBUG_STATIC_CPU_HAS
configurable debugging facility, motivated by recent obscure FPU
code bugs, by Borislav Petkov
- Reimplement FPU detection code in C and drop the old asm code, by
Peter Anvin."
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, fpu: Use static_cpu_has_safe before alternatives
x86: Add a static_cpu_has_safe variant
x86: Sanity-check static_cpu_has usage
x86, cpu: Add a synthetic, always true, cpu feature
x86: Get rid of ->hard_math and all the FPU asm fu
Pull x86 cpu updates from Ingo Molnar:
"Two changes:
- Extend 32-bit double fault debugging aid to 64-bit
- Fix a build warning"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel/cacheinfo: Shut up last long-standing warning
x86: Extend #DF debugging aid to 64-bit
Pull asm/x86 changes from Ingo Molnar:
"Misc changes, with a bigger processor-flags cleanup/reorganization by
Peter Anvin"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, asm, cleanup: Replace open-coded control register values with symbolic
x86, processor-flags: Fix the datatypes and add bit number defines
x86: Rename X86_CR4_RDWRGSFS to X86_CR4_FSGSBASE
x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXED
linux/const.h: Add _BITUL() and _BITULL()
x86/vdso: Convert use of typedef ctl_table to struct ctl_table
x86: __force_order doesn't need to be an actual variable
Pull perf updates from Ingo Molnar:
"Kernel improvements:
- watchdog driver improvements by Li Zefan
- Power7 CPI stack events related improvements by Sukadev Bhattiprolu
- event multiplexing via hrtimers and other improvements by Stephane
Eranian
- kernel stack use optimization by Andrew Hunter
- AMD IOMMU uncore PMU support by Suravee Suthikulpanit
- NMI handling rate-limits by Dave Hansen
- various hw_breakpoint fixes by Oleg Nesterov
- hw_breakpoint overflow period sampling and related signal handling
fixes by Jiri Olsa
- Intel Haswell PMU support by Andi Kleen
Tooling improvements:
- Reset SIGTERM handler in workload child process, fix from David
Ahern.
- Makefile reorganization, prep work for Kconfig patches, from Jiri
Olsa.
- Add automated make test suite, from Jiri Olsa.
- Add --percent-limit option to 'top' and 'report', from Namhyung
Kim.
- Sorting improvements, from Namhyung Kim.
- Expand definition of sysfs format attribute, from Michael Ellerman.
Tooling fixes:
- 'perf tests' fixes from Jiri Olsa.
- Make Power7 CPI stack events available in sysfs, from Sukadev
Bhattiprolu.
- Handle death by SIGTERM in 'perf record', fix from David Ahern.
- Fix printing of perf_event_paranoid message, from David Ahern.
- Handle realloc failures in 'perf kvm', from David Ahern.
- Fix divide by 0 in variance, from David Ahern.
- Save parent pid in thread struct, from David Ahern.
- Handle JITed code in shared memory, from Andi Kleen.
- Fixes for 'perf diff', from Jiri Olsa.
- Remove some unused struct members, from Jiri Olsa.
- Add missing liblk.a dependency for python/perf.so, fix from Jiri
Olsa.
- Respect CROSS_COMPILE in liblk.a, from Rabin Vincent.
- No need to do locking when adding hists in perf report, only 'top'
needs that, from Namhyung Kim.
- Fix alignment of symbol column in in the hists browser (top,
report) when -v is given, from NAmhyung Kim.
- Fix 'perf top' -E option behavior, from Namhyung Kim.
- Fix bug in isupper() and islower(), from Sukadev Bhattiprolu.
- Fix compile errors in bp_signal 'perf test', from Sukadev
Bhattiprolu.
... and more things"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (102 commits)
perf/x86: Disable PEBS-LL in intel_pmu_pebs_disable()
perf/x86: Fix shared register mutual exclusion enforcement
perf/x86/intel: Support full width counting
x86: Add NMI duration tracepoints
perf: Drop sample rate when sampling is too slow
x86: Warn when NMI handlers take large amounts of time
hw_breakpoint: Introduce "struct bp_cpuinfo"
hw_breakpoint: Simplify *register_wide_hw_breakpoint()
hw_breakpoint: Introduce cpumask_of_bp()
hw_breakpoint: Simplify the "weight" usage in toggle_bp_slot() paths
hw_breakpoint: Simplify list/idx mess in toggle_bp_slot() paths
perf/x86/intel: Add mem-loads/stores support for Haswell
perf/x86/intel: Support Haswell/v4 LBR format
perf/x86/intel: Move NMI clearing to end of PMI handler
perf/x86/intel: Add Haswell PEBS support
perf/x86/intel: Add simple Haswell PMU support
perf/x86/intel: Add Haswell PEBS record support
perf/x86/intel: Fix sparse warning
perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation
perf/x86/amd: Add IOMMU Performance Counter resource management
...
the code for SRAR (software recoverable action required) errors.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=PJXS
-----END PGP SIGNATURE-----
Merge tag 'please-pull-mce' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into x86/ras
Pull MCE cleanup from Tony Luck:
"Changes to simplify the SDM means that we can also simplify
the code for SRAR (software recoverable action required) errors."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Update some SRAR severity conditions check to make it clearer,
according to latest Intel SDM Vol 3(June 2013), table 15-20.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEbBAABAgAGBQJRxf9cAAoJEHm+PkMAQRiGMWkH911xM4gRmFgE7SqVW4F4AWBm
ngcqMqNy9IdqKfibORUUDvVfEa5gjD5ai2quIKpfQiaukbpQJ696H90ijuAkajLn
DQBrN243s0pzhhc/quWINnWxsFQ613JjdUMUMaD7e9A1aKjYzWrPGt/tSjrFXGCP
tArTupVzc/iOmnEQDKiROI/Nokq44QJ36aTGPM7n08xMtpKmkCXM+9/UosBteB0O
HVI33dmjwz7i55fI53XAWyuZCE+gSEnA4z8spJ9LfXso2W14V+roc+GuL6OyeeTI
pCn/+4niVPb4B0ROZlpyVmdZjbPPcMMEK5o+BSJI68SH6LHZTQh2iVuqYfpSyA==
=uUH5
-----END PGP SIGNATURE-----
Merge tag 'v3.10-rc7' into drm-next
Linux 3.10-rc7
The sdvo lvds fix in this -fixes pull
commit c3456fb3e4
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jun 10 09:47:58 2013 +0200
drm/i915: prefer VBT modes for SVDO-LVDS over EDID
has a silent functional conflict with
commit 990256aec2
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri May 31 12:17:07 2013 +0000
drm: Add probed modes in probe order
in drm-next. W simply need to add the vbt modes before edid modes, i.e. the
other way round than now.
Conflicts:
drivers/gpu/drm/drm_prime.c
drivers/gpu/drm/i915/intel_sdvo.c
This patch fixes a problem with the shared registers mutual
exclusion code and incremental event scheduling by the
generic perf_event code.
There was a bug whereby the mutual exclusion on the shared
registers was not enforced because of incremental scheduling
abort due to event constraints. As an example on Intel
Nehalem, consider the following events:
group1= L1D_CACHE_LD:E_STATE,OFFCORE_RESPONSE_0:PF_RFO,L1D_CACHE_LD:I_STATE
group2= L1D_CACHE_LD:I_STATE
The L1D_CACHE_LD event can only be measured by 2 counters. Yet, there
are 3 instances here. The first group can be scheduled and is committed.
Then, the generic code tries to schedule group2 and this fails (because
there is no more counter to support the 3rd instance of L1D_CACHE_LD).
But in x86_schedule_events() error path, put_event_contraints() is invoked
on ALL the events and not just the ones that just failed. That causes the
"lock" on the shared offcore_response MSR to be released. Yet the first group
is actually scheduled and is exposed to reprogramming of that shared msr by
the sibling HT thread. In other words, there is no guarantee on what is
measured.
This patch fixes the problem by tagging committed events with the
PERF_X86_EVENT_COMMITTED tag. In the error path of x86_schedule_events(),
only the events NOT tagged have their constraint released. The tag
is eventually removed when the event in descheduled.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130620164254.GA3556@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recent Intel CPUs like Haswell and IvyBridge have a new
alternative MSR range for perfctrs that allows writing the full
counter width. Enable this range if the hardware reports it
using a new capability bit.
Currently the perf code queries CPUID to get the counter width,
and sign extends the counter values as needed. The traditional
PERFCTR MSRs always limit to 32bit, even though the counter
internally is larger (usually 48 bits on recent CPUs)
When the new capability is set use the alternative range which
do not have these restrictions.
This lowers the overhead of perf stat slightly because it has to
do less interrupts to accumulate the counter value. On Haswell
it also avoids some problems with TSX aborting when the end of
the counter range is reached.
( See the patch "perf/x86/intel: Avoid checkpointed counters
causing excessive TSX aborts" for more details. )
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372173153-20215-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is some confusion about the 'mce_poll_banks' and 'mce_banks_owned'
per-cpu bitmaps. Provide comments so that we all know exactly what these
are used for, and why.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
On one sytem that mtrr range is more then 44bits, in dmesg we have
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 [000080000000-0000FFFFFFFF] mask 3FFF80000000 uncachable
[ 0.000000] 1 [380000000000-38FFFFFFFFFF] mask 3F0000000000 uncachable
[ 0.000000] 2 [000099000000-000099FFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 3 [00009A000000-00009AFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 4 [381FFA000000-381FFBFFFFFF] mask 3FFFFE000000 write-through
[ 0.000000] 5 [381FFC000000-381FFC0FFFFF] mask 3FFFFFF00000 write-through
[ 0.000000] 6 [0000AD000000-0000ADFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 7 [0000BD000000-0000BDFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
but /proc/mtrr report wrong:
reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable
reg01: base=0x80000000000 (8388608MB), size=1048576MB, count=1: uncachable
reg02: base=0x099000000 ( 2448MB), size= 16MB, count=1: write-through
reg03: base=0x09a000000 ( 2464MB), size= 16MB, count=1: write-through
reg04: base=0x81ffa000000 (8519584MB), size= 32MB, count=1: write-through
reg05: base=0x81ffc000000 (8519616MB), size= 1MB, count=1: write-through
reg06: base=0x0ad000000 ( 2768MB), size= 16MB, count=1: write-through
reg07: base=0x0bd000000 ( 3024MB), size= 16MB, count=1: write-through
reg08: base=0x09b000000 ( 2480MB), size= 16MB, count=1: write-combining
so bit 44 and bit 45 get cut off.
We have problems in arch/x86/kernel/cpu/mtrr/generic.c::generic_get_mtrr().
1. for base, we miss cast base_lo to 64bit before shifting.
Fix that by adding u64 casting.
2. for size, it only can handle 44 bits aka 32bits + page_shift
Fix that with 64bit mask instead of 32bit mask_lo, then range could be
more than 44bits.
At the same time, we need to update size_or_mask for old cpus that does
support cpuid 0x80000008 to get phys_addr. Need to set high 32bits
to all 1s, otherwise will not get correct size for them.
Also fix mtrr_add_page: it should check base and (base + size - 1)
instead of base and size, as base and size could be small but
base + size could bigger enough to be out of boundary. We can
use boot_cpu_data.x86_phys_bits directly to avoid size_or_mask.
So When are we going to have size more than 44bits? that is 16TiB.
after patch we have right ouput:
reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable
reg01: base=0x380000000000 (58720256MB), size=1048576MB, count=1: uncachable
reg02: base=0x099000000 ( 2448MB), size= 16MB, count=1: write-through
reg03: base=0x09a000000 ( 2464MB), size= 16MB, count=1: write-through
reg04: base=0x381ffa000000 (58851232MB), size= 32MB, count=1: write-through
reg05: base=0x381ffc000000 (58851264MB), size= 1MB, count=1: write-through
reg06: base=0x0ad000000 ( 2768MB), size= 16MB, count=1: write-through
reg07: base=0x0bd000000 ( 3024MB), size= 16MB, count=1: write-through
reg08: base=0x09b000000 ( 2480MB), size= 16MB, count=1: write-combining
-v2: simply checking in mtrr_add_page according to hpa.
[ hpa: This probably wants to go into -stable only after having sat in
mainline for a bit. It is not a regression. ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1371162815-29931-1-git-send-email-yinghai@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch keeps track of how long perf's NMI handler is taking,
and also calculates how many samples perf can take a second. If
the sample length times the expected max number of samples
exceeds a configurable threshold, it drops the sample rate.
This way, we don't have a runaway sampling process eating up the
CPU.
This patch can tend to drop the sample rate down to level where
perf doesn't work very well. *BUT* the alternative is that my
system hangs because it spends all of its time handling NMIs.
I'll take a busted performance tool over an entire system that's
busted and undebuggable any day.
BTW, my suspicion is that there's still an underlying bug here.
Using the HPET instead of the TSC is definitely a contributing
factor, but I suspect there are some other things going on.
But, I can't go dig down on a bug like that with my machine
hanging all the time.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
[ Prettified it a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Peter Anvin:
"This series fixes a couple of build failures, and fixes MTRR cleanup
and memory setup on very specific memory maps.
Finally, it fixes triggering backtraces on all CPUs, which was
inadvertently disabled on x86."
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Fix dummy variable buffer allocation
x86: Fix trigger_all_cpu_backtrace() implementation
x86: Fix section mismatch on load_ucode_ap
x86: fix build error and kconfig for ia32_emulation and binfmt
range: Do not add new blank slot with add_range_with_merge
x86, mtrr: Fix original mtrr range get for mtrr_cleanup
[Purpose of this patch]
As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.
http://www.spinics.net/lists/mm-commits/msg85707.html
<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled. They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.
There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers. Tracing such events gives
us the information about IRQ interaction with other system events.
The trace also tells where the system is spending its time. We want to
know which cores are handling interrupts and how they are affecting other
processes in the system. Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>
On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.
I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.
[Patch Description]
Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.
So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
- local_timer_vector
- reschedule_vector
- call_function_vector
- call_function_single_vector
- irq_work_entry_vector
- error_apic_vector
- thermal_apic_vector
- threshold_apic_vector
- spurious_apic_vector
- x86_platform_ipi_vector
Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
- Create trace irq handlers with entering_irq()/exiting_irq().
- Create a new IDT, trace_idt_table, at boot time by adding a logic to
_set_gate(). It is just a copy of original idt table.
- Register the new handlers for tracpoints to the new IDT by introducing
macros to alloc_intr_gate() called at registering time of irq_vector handlers.
- Add checking, whether irq vector tracing is on/off, into load_current_idt().
This has to be done below debug checking for these reasons.
- Switching to debug IDT may be kicked while tracing is enabled.
- On the other hands, switching to trace IDT is kicked only when debugging
is disabled.
In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Rename variables for debugging to describe meaning of them precisely.
Also, introduce a generic way to switch IDT by checking a current state,
debug on/off.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323A8.7050905@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
When implementing tracepoints in interrupt handers, if the tracepoints are
simply added in the performance sensitive path of interrupt handers,
it may cause potential performance problem due to the time penalty.
To solve the problem, an idea is to prepare non-trace/trace irq handers and
switch their IDTs at the enabling/disabling time.
So, let's introduce entering_irq()/exiting_irq() for pre/post-
processing of each irq handler.
A way to use them is as follows.
Non-trace irq handler:
smp_irq_handler()
{
entering_irq(); /* pre-processing of this handler */
__smp_irq_handler(); /*
* common logic between non-trace and trace handlers
* in a vector.
*/
exiting_irq(); /* post-processing of this handler */
}
Trace irq_handler:
smp_trace_irq_handler()
{
entering_irq(); /* pre-processing of this handler */
trace_irq_entry(); /* tracepoint for irq entry */
__smp_irq_handler(); /*
* common logic between non-trace and trace handlers
* in a vector.
*/
trace_irq_exit(); /* tracepoint for irq exit */
exiting_irq(); /* post-processing of this handler */
}
If tracepoints can place outside entering_irq()/exiting_irq() as follows,
it looks cleaner.
smp_trace_irq_handler()
{
trace_irq_entry();
smp_irq_handler();
trace_irq_exit();
}
But it doesn't work.
The problem is with irq_enter/exit() being called. They must be called before
trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before
any tracepoints are used, as tracepoints use rcu to synchronize.
As a possible alternative, we may be able to call irq_enter() first as follows
if irq_enter() can nest.
smp_trace_irq_hander()
{
irq_entry();
trace_irq_entry();
smp_irq_handler();
trace_irq_exit();
irq_exit();
}
But it doesn't work, either.
If irq_enter() is nested, it may have a time penalty because it has to check if it
was already called or not. The time penalty is not desired in performance sensitive
paths even if it is tiny.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
We want to use this in early code where alternatives might not have run
yet and for that case we fall back to the dynamic boot_cpu_has.
For that, force a 5-byte jump since the compiler could be generating
differently sized jumps for each label.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370772454-6106-5-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
static_cpu_has may be used only after alternatives have run. Before that
it always returns false if constant folding with __builtin_constant_p()
doesn't happen. And you don't want that.
This patch is the result of me debugging an issue where I overzealously
put static_cpu_has in code which executed before alternatives have run
and had to spend some time with scratching head and cursing at the
monitor.
So add a jump to a warning which screams loudly when we use this
function too early. The alternatives patch that check away in
conjunction with patching the rest of the kernel image.
[ hpa: factored this into its own configuration option. If we want to
have an overarching option, it should be an option which selects
other options, not as a group option in the source code. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370772454-6106-4-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
arch/x86/kernel/cpu/intel_cacheinfo.c: In function ‘init_intel_cacheinfo’:
arch/x86/kernel/cpu/intel_cacheinfo.c:642:28: warning: ‘this_leaf.size’ may be used uninitialized in this function [-Wmaybe-uninitialized] arch/x86/kernel/cpu/intel_cacheinfo.c:643:29: warning: ‘this_leaf.eax.split.num_threads_sharing’ may be used uninitialized in this function [-Wmaybe-uninitialized]
This keeps on happening during randbuilds and the compiler is
wrong here:
In the case where cpuid4_cache_lookup_regs() returns 0, both
this_leaf.size and this_leaf.eax get initialized. In the case
where the CPUID leaf doesn't contain valid cache info, we error
out which init_intel_cacheinfo() handles correctly without
touching the abovementioned fields.
So shut up the warning by clearing out the struct which we hand
down.
While at it, reverse error handling and gain one indentation
level.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370710095-20547-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
mem-loads is basically the same as Sandy Bridge,
but we use a separate string for changes later.
Haswell doesn't support the full precise store mode,
so we emulate it using the "DataLA" facility.
This allows to do everything, but for data sources we
can only detect L1 hit or not.
There is no explicit enable bit anymore, so we have
to tie it to a perf internal only flag.
The address is supported for all memory related PEBS
events with DataLA. Instead of only logging for the
load and store events we allow logging it for all
(it will be simply 0 if the current event does not
support it)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andi Kleen <ak@linux.jf.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1371515812-9646-7-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Haswell has two additional LBR from flags for TSX: in_tx and
abort_tx, implemented as a new "v4" version of the LBR format.
Handle those in and adjust the sign extension code to still
correctly extend. The flags are exported similarly in the LBR
record to the existing misprediction flag
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andi Kleen <ak@linux.jf.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1371515812-9646-6-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This avoids some problems with spurious PMIs on Haswell.
Haswell seems to behave more like P4 in this regard. Do
the same thing as the P4 perf handler by unmasking
the NMI only at the end. Shouldn't make any difference
for earlier family 6 cores.
(Tested on Haswell, IvyBridge, Westmere, Saltwell (Atom).)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andi Kleen <ak@linux.jf.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1371515812-9646-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add simple PEBS support for Haswell.
The constraints are similar to SandyBridge with a few new
events.
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andi Kleen <ak@linux.jf.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1371515812-9646-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Similar to SandyBridge, but has a few new events and two
new counter bits.
There are some new counter flags that need to be prevented
from being set on fixed counters, and allowed to be set
for generic counters.
Also we add support for the counter 2 constraint to handle
all raw events.
(Contains fixes from Stephane Eranian.)
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andi Kleen <ak@linux.jf.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1371515812-9646-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support for the Haswell extended (fmt2) PEBS format.
It has a superset of the nhm (fmt1) PEBS fields, but has a
longer record so we need to adjust the code paths.
The main advantage is the new "EventingRip" support which
directly gives the instruction, not off-by-one instruction. So
with precise == 2 we use that directly and don't try to use LBRs
and walking basic blocks. This lowers the overhead of using
precise significantly.
Some other features are added in later patches.
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andi Kleen <ak@linux.jf.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1371515812-9646-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement a perf PMU to handle IOMMU performance counters and events.
The PMU only supports counting mode (e.g. perf stat). Since the counters
are shared across all cores, the PMU is implemented as "system-wide" mode.
To invoke the AMD IOMMU PMU, issue a perf tool command such as:
./perf stat -a -e amd_iommu/<events>/ <command>
or:
./perf stat -a -e amd_iommu/config=<config-data>,config1=<config1-data>/ <command>
For example:
./perf stat -a -e amd_iommu/mem_trans_total/ <command>
The resulting count will be how many IOMMU total peripheral memory
operations were performed during the command execution window.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1370466709-3212-3-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
intel_pmu_handle_irq() has a warning in it if it does too many
loops. It is a WARN_ONCE(), but the perf_event_print_debug()
call beneath it is unconditional. For the first warning, you get
a nice backtrace and message, but subsequent ones just dump the
PMU state with no leading messages. I doubt this is what was
intended.
This patch will only print the PMU state when paired with the
WARN_ON() text. It effectively open-codes WARN_ONCE()'s
one-time-only logic.
My suspicion is that the code really just wants to make sure we
do not sit in the loop and spit out a warning for every loop
iteration after the 100th. From what I've seen, this is very
unlikely to happen since we also clear the PMU state.
After this patch, instead of seeing the PMU state dumped each
time, you will just see:
[57494.894540] perf_event_intel: clearing PMU state on CPU#129
[57579.539668] perf_event_intel: clearing PMU state on CPU#10
[57587.137762] perf_event_intel: clearing PMU state on CPU#134
[57623.039912] perf_event_intel: clearing PMU state on CPU#114
[57644.559943] perf_event_intel: clearing PMU state on CPU#118
...
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130530174559.0DB049F4@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86_schedule_events() caches event constraints on the stack during
scheduling. Given the number of possible events, this is 512 bytes of
stack; since it can be invoked under schedule() under god-knows-what,
this is causing stack blowouts.
Trade some space usage for stack safety: add a place to cache the
constraint pointer to struct perf_event. For 8 bytes per event (1% of
its size) we can save the giant stack frame.
This shouldn't change any aspect of scheduling whatsoever and while in
theory the locality's a tiny bit worse, I doubt we'll see any
performance impact either.
Tested: `perf stat whatever` does not blow up and produces
results that aren't hugely obviously wrong. I'm not sure how to run
particularly good tests of perf code, but this should not produce any
functional change whatsoever.
Signed-off-by: Andrew Hunter <ahh@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1369332423-4400-1-git-send-email-ahh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes broken support of PEBS-LL on SNB-EP/IVB-EP.
For some reason, the LDLAT extra reg definition for snb_ep
showed up as duplicate in the snb table.
This patch moves the definition of LDLAT back into the
snb_ep table.
Thanks to Don Zickus for tracking this one down.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130607212210.GA11849@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Joshua reported: Commit cd7b304dfaf1 (x86, range: fix missing merge
during add range) broke mtrr cleanup on his setup in 3.9.5.
corresponding commit in upstream is fbe06b7bae.
*BAD*gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: -0G
https://bugzilla.kernel.org/show_bug.cgi?id=59491
So it rejects new var mtrr layout.
It turns out we have some problem with initial mtrr range retrieval.
The current sequence is:
x86_get_mtrr_mem_range
==> bunchs of add_range_with_merge
==> bunchs of subract_range
==> clean_sort_range
add_range_with_merge for [0,1M)
sort_range()
add_range_with_merge could have blank slots, so we can not just
sort only, that will have final result have extra blank slot in head.
So move that calling add_range_with_merge for [0,1M), with that we
could avoid extra clean_sort_range calling.
Reported-by: Joshua Covington <joshuacov@googlemail.com>
Tested-by: Joshua Covington <joshuacov@googlemail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1371154622-8929-2-git-send-email-yinghai@kernel.org
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The package power limit notification interrupt is primarily for
system diagnosis, and should not be blindly enabled on every
system by default -- particuarly since Linux does nothing in the
handler except count how many times it has been called...
Add a new kernel cmdline parameter "int_pln_enable" for situations where
users want to oberve these events via existing system counters:
$ grep TRM /proc/interrupts
$ grep . /sys/devices/system/cpu/cpu*/thermal_throttle/*
https://bugzilla.kernel.org/show_bug.cgi?id=36182
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Package power limits are common on some systems under some conditions --
so printing console messages when limits are reached
causes unnecessary customer concern and support calls.
Note that even with these console messages gone,
the events can still be observed via system counters:
$ grep TRM /proc/interrupts
Shows total thermal interrupts, which includes both power
limit notifications and thermal throttling interrupts.
$ grep . /sys/devices/system/cpu/cpu*/thermal_throttle/*
Will show what caused those interrupts, core and package
throttling and power limit notifications.
https://bugzilla.kernel.org/show_bug.cgi?id=36182
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
