Some transports (hyperv, virtio) acquire the sock lock during the
.release() callback.
In the vsock_stream_connect() we call vsock_assign_transport(); if
the socket was previously assigned to another transport, the
vsk->transport->release() is called, but the sock lock is already
held in the vsock_stream_connect(), causing a deadlock reported by
syzbot:
INFO: task syz-executor280:9768 blocked for more than 143 seconds.
Not tainted 5.6.0-rc1-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor280 D27912 9768 9766 0x00000000
Call Trace:
context_switch kernel/sched/core.c:3386 [inline]
__schedule+0x934/0x1f90 kernel/sched/core.c:4082
schedule+0xdc/0x2b0 kernel/sched/core.c:4156
__lock_sock+0x165/0x290 net/core/sock.c:2413
lock_sock_nested+0xfe/0x120 net/core/sock.c:2938
virtio_transport_release+0xc4/0xd60 net/vmw_vsock/virtio_transport_common.c:832
vsock_assign_transport+0xf3/0x3b0 net/vmw_vsock/af_vsock.c:454
vsock_stream_connect+0x2b3/0xc70 net/vmw_vsock/af_vsock.c:1288
__sys_connect_file+0x161/0x1c0 net/socket.c:1857
__sys_connect+0x174/0x1b0 net/socket.c:1874
__do_sys_connect net/socket.c:1885 [inline]
__se_sys_connect net/socket.c:1882 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1882
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
To avoid this issue, this patch remove the lock acquiring in the
.release() callback of hyperv and virtio transports, and it holds
the lock when we call vsk->transport->release() in the vsock core.
Reported-by: syzbot+731710996d79d0d58fbc@syzkaller.appspotmail.com
Fixes: 408624af4c ("vsock: use local transport when it is loaded")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow the pattern used with other *_show_fdinfo functions and only
define unix_show_fdinfo and set it in proto_ops if CONFIG_PROCFS
is set.
Fixes: 3c32da19a8 ("unix: Show number of pending scm files of receive queue in fdinfo")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In smc_ib_remove_dev() check if the provided ib device was actually
initialized for SMC before.
Reported-by: syzbot+84484ccebdd4e5451d91@syzkaller.appspotmail.com
Fixes: a4cf0443c4 ("smc: introduce SMC as an IB-client")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an SMC connection to a certain peer is setup the first time,
a new linkgroup is created. In case of setup failures, such a
linkgroup is unusable and should disappear. As a first step the
linkgroup is removed from the linkgroup list in smc_lgr_forget().
There are 2 problems:
smc_listen_decline() might be called before linkgroup creation
resulting in a crash due to calling smc_lgr_forget() with
parameter NULL.
If a setup failure occurs after linkgroup creation, the connection
is never unregistered from the linkgroup, preventing linkgroup
freeing.
This patch introduces an enhanced smc_lgr_cleanup_early() function
which
* contains a linkgroup check for early smc_listen_decline()
invocations
* invokes smc_conn_free() to guarantee unregistering of the
connection.
* schedules fast linkgroup removal of the unusable linkgroup
And the unused function smcd_conn_free() is removed from smc_core.h.
Fixes: 3b2dec2603 ("net/smc: restructure client and server code in af_smc")
Fixes: 2a0674fffb ("net/smc: improve abnormal termination of link groups")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The put of the flags was added by the commit referenced in fixes tag,
however the size of the message was not extended accordingly.
Fix this by adding size of the flags bitfield to the message size.
Fixes: e382267860 ("net: sched: update action implementations to support flags")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled.
The devlink->lock is held when devlink_dpipe_table_find()
is called in non RCU read side section. Therefore, pass struct devlink
to devlink_dpipe_table_find() for lockdep checking.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes:
1) Perform garbage collection from workqueue to fix rcu detected
stall in ipset hash set types, from Jozsef Kadlecsik.
2) Fix the forceadd evaluation path, also from Jozsef.
3) Fix nft_set_pipapo selftest, from Stefano Brivio.
4) Crash when add-flush-add element in pipapo set, also from Stefano.
Add test to cover this crash.
5) Remove sysctl entry under mutex in hashlimit, from Cong Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Before releasing the global mutex, we only unlink the hashtable
from the hash list, its proc file is still not unregistered at
this point. So syzbot could trigger a race condition where a
parallel htable_create() could register the same file immediately
after the mutex is released.
Move htable_remove_proc_entry() back to mutex protection to
fix this. And, fold htable_destroy() into htable_put() to make
the code slightly easier to understand.
Reported-and-tested-by: syzbot+d195fd3b9a364ddd6731@syzkaller.appspotmail.com
Fixes: c4a3922d2d ("netfilter: xt_hashlimit: reduce hashlimit_mutex scope for htable_put()")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Syzbot reported that ethnl_compact_sanity_checks() can be tricked into
reading past the end of ETHTOOL_A_BITSET_VALUE and ETHTOOL_A_BITSET_MASK
attributes and even the message by passing a value between (u32)(-31)
and (u32)(-1) as ETHTOOL_A_BITSET_SIZE.
The problem is that DIV_ROUND_UP(attr_nbits, 32) is 0 for such values so
that zero length ETHTOOL_A_BITSET_VALUE will pass the length check but
ethnl_bitmap32_not_zero() check would try to access up to 512 MB of
attribute "payload".
Prevent this overflow byt limiting the bitset size. Technically, compact
bitset format would allow bitset sizes up to almost 2^18 (so that the
nest size does not exceed U16_MAX) but bitsets used by ethtool are much
shorter. S16_MAX, the largest value which can be directly used as an
upper limit in policy, should be a reasonable compromise.
Fixes: 10b518d4e6 ("ethtool: netlink bitset handling")
Reported-by: syzbot+7fd4ed5b4234ab1fdccd@syzkaller.appspotmail.com
Reported-by: syzbot+709b7a64d57978247e44@syzkaller.appspotmail.com
Reported-by: syzbot+983cb8fb2d17a7af549d@syzkaller.appspotmail.com
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the lower and upper bounds when there are multiple TCs and
traffic is on the the same TC on the same device.
The lower bound is represented by 'qoffset' and the upper limit for
hash value is 'qcount + qoffset'. This gives a clean Rx to Tx queue
mapping when there are multiple TCs, as the queue indices for upper TCs
will be offset by 'qoffset'.
v2: Fixed commit description based on comments.
Fixes: 1b837d489e ("net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash")
Fixes: eadec877ce ("net: Add support for subordinate traffic classes to netdev_pick_tx")
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil reports that adding elements, flushing and re-adding them
right away:
nft add table t '{ set s { type ipv4_addr . inet_service; flags interval; }; }'
nft add element t s '{ 10.0.0.1 . 22-25, 10.0.0.1 . 10-20 }'
nft flush set t s
nft add element t s '{ 10.0.0.1 . 10-20, 10.0.0.1 . 22-25 }'
triggers, almost reliably, a crash like this one:
[ 71.319848] general protection fault, probably for non-canonical address 0x6f6b6e696c2e756e: 0000 [#1] PREEMPT SMP PTI
[ 71.321540] CPU: 3 PID: 1201 Comm: kworker/3:2 Not tainted 5.6.0-rc1-00377-g2bb07f4e1d861 #192
[ 71.322746] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014
[ 71.324430] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[ 71.325387] RIP: 0010:nft_set_elem_destroy+0xa5/0x110 [nf_tables]
[ 71.326164] Code: 89 d4 84 c0 74 0e 8b 77 44 0f b6 f8 48 01 df e8 41 ff ff ff 45 84 e4 74 36 44 0f b6 63 08 45 84 e4 74 2c 49 01 dc 49 8b 04 24 <48> 8b 40 38 48 85 c0 74 4f 48 89 e7 4c 8b
[ 71.328423] RSP: 0018:ffffc9000226fd90 EFLAGS: 00010282
[ 71.329225] RAX: 6f6b6e696c2e756e RBX: ffff88813ab79f60 RCX: ffff88813931b5a0
[ 71.330365] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88813ab79f9a
[ 71.331473] RBP: ffff88813ab79f60 R08: 0000000000000008 R09: 0000000000000000
[ 71.332627] R10: 000000000000021c R11: 0000000000000000 R12: ffff88813ab79fc2
[ 71.333615] R13: ffff88813b3adf50 R14: dead000000000100 R15: ffff88813931b8a0
[ 71.334596] FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000
[ 71.335780] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 71.336577] CR2: 000055ac683710f0 CR3: 000000013a222003 CR4: 0000000000360ee0
[ 71.337533] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 71.338557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 71.339718] Call Trace:
[ 71.340093] nft_pipapo_destroy+0x7a/0x170 [nf_tables_set]
[ 71.340973] nft_set_destroy+0x20/0x50 [nf_tables]
[ 71.341879] nf_tables_trans_destroy_work+0x246/0x260 [nf_tables]
[ 71.342916] process_one_work+0x1d5/0x3c0
[ 71.343601] worker_thread+0x4a/0x3c0
[ 71.344229] kthread+0xfb/0x130
[ 71.344780] ? process_one_work+0x3c0/0x3c0
[ 71.345477] ? kthread_park+0x90/0x90
[ 71.346129] ret_from_fork+0x35/0x40
[ 71.346748] Modules linked in: nf_tables_set nf_tables nfnetlink 8021q [last unloaded: nfnetlink]
[ 71.348153] ---[ end trace 2eaa8149ca759bcc ]---
[ 71.349066] RIP: 0010:nft_set_elem_destroy+0xa5/0x110 [nf_tables]
[ 71.350016] Code: 89 d4 84 c0 74 0e 8b 77 44 0f b6 f8 48 01 df e8 41 ff ff ff 45 84 e4 74 36 44 0f b6 63 08 45 84 e4 74 2c 49 01 dc 49 8b 04 24 <48> 8b 40 38 48 85 c0 74 4f 48 89 e7 4c 8b
[ 71.350017] RSP: 0018:ffffc9000226fd90 EFLAGS: 00010282
[ 71.350019] RAX: 6f6b6e696c2e756e RBX: ffff88813ab79f60 RCX: ffff88813931b5a0
[ 71.350019] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88813ab79f9a
[ 71.350020] RBP: ffff88813ab79f60 R08: 0000000000000008 R09: 0000000000000000
[ 71.350021] R10: 000000000000021c R11: 0000000000000000 R12: ffff88813ab79fc2
[ 71.350022] R13: ffff88813b3adf50 R14: dead000000000100 R15: ffff88813931b8a0
[ 71.350025] FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000
[ 71.350026] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 71.350027] CR2: 000055ac683710f0 CR3: 000000013a222003 CR4: 0000000000360ee0
[ 71.350028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 71.350028] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 71.350030] Kernel panic - not syncing: Fatal exception
[ 71.350412] Kernel Offset: disabled
[ 71.365922] ---[ end Kernel panic - not syncing: Fatal exception ]---
which is caused by dangling elements that have been deactivated, but
never removed.
On a flush operation, nft_pipapo_walk() walks through all the elements
in the mapping table, which are then deactivated by nft_flush_set(),
one by one, and added to the commit list for removal. Element data is
then freed.
On transaction commit, nft_pipapo_remove() is called, and failed to
remove these elements, leading to the stale references in the mapping.
The first symptom of this, revealed by KASan, is a one-byte
use-after-free in subsequent calls to nft_pipapo_walk(), which is
usually not enough to trigger a panic. When stale elements are used
more heavily, though, such as double-free via nft_pipapo_destroy()
as in Phil's case, the problem becomes more noticeable.
The issue comes from that fact that, on a flush operation,
nft_pipapo_remove() won't get the actual key data via elem->key,
elements to be deleted upon commit won't be found by the lookup via
pipapo_get(), and removal will be skipped. Key data should be fetched
via nft_set_ext_key(), instead.
Reported-by: Phil Sutter <phil@nwl.cc>
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jozsef Kadlecsik says:
====================
ipset patches for nf
The first one is larger than usual, but the issue could not be solved simpler.
Also, it's a resend of the patch I submitted a few days ago, with a one line
fix on top of that: the size of the comment extensions was not taken into
account at reporting the full size of the set.
- Fix "INFO: rcu detected stall in hash_xxx" reports of syzbot
by introducing region locking and using workqueue instead of timer based
gc of timed out entries in hash types of sets in ipset.
- Fix the forceadd evaluation path - the bug was also uncovered by the syzbot.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* remove a double mutex-unlock
* fix a leak in an error path
* NULL pointer check
* include if_vlan.h where needed
* avoid RCU list traversal when not under RCU
-----BEGIN PGP SIGNATURE-----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=7JH4
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2020-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg
====================
A few fixes:
* remove a double mutex-unlock
* fix a leak in an error path
* NULL pointer check
* include if_vlan.h where needed
* avoid RCU list traversal when not under RCU
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but
if the packet has the vlan header inside (e.g. bridge with disabled
tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag()
to extract the vid before filtering which in turn calls pskb_may_pull()
and we may end up with a stale eth pointer. Moreover the cached eth header
pointer will generally be wrong after that operation. Remove the eth header
caching and just use eth_hdr() directly, the compiler does the right thing
and calculates it only once so we don't lose anything.
Fixes: 057658cb33 ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
local->sta_mtx is held in __ieee80211_check_fast_rx_iface().
No need to use list_for_each_entry_rcu() as it also requires
a cond argument to avoid false lockdep warnings when not used in
RCU read-side section (with CONFIG_PROVE_RCU_LIST).
Therefore use list_for_each_entry();
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200223143302.15390-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
devlink_dpipe_table_find() should be called under either
rcu_read_lock() or devlink->lock. devlink_dpipe_table_register()
calls devlink_dpipe_table_find() without holding the lock
and acquires it later. Therefore hold the devlink->lock
from the beginning of devlink_dpipe_table_register().
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a rare corner case the new logic for undo of SYNACK RTO could
result in triggering the warning in tcp_fastretrans_alert() that says:
WARN_ON(tp->retrans_out != 0);
The warning looked like:
WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270
The sequence that tickles this bug is:
- Fast Open server receives TFO SYN with data, sends SYNACK
- (client receives SYNACK and sends ACK, but ACK is lost)
- server app sends some data packets
- (N of the first data packets are lost)
- server receives client ACK that has a TS ECR matching first SYNACK,
and also SACKs suggesting the first N data packets were lost
- server performs TS undo of SYNACK RTO, then immediately
enters recovery
- buggy behavior then performed a *second* undo that caused
the connection to be in CA_Open with retrans_out != 0
Basically, the incoming ACK packet with SACK blocks causes us to first
undo the cwnd reduction from the SYNACK RTO, but then immediately
enters fast recovery, which then makes us eligible for undo again. And
then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo
using a "mash-up" of state from two different loss recovery phases: it
uses the timestamp info from the ACK of the original SYNACK, and the
undo_marker from the fast recovery.
This fix refines the logic to only invoke the tcp_try_undo_loss()
inside tcp_rcv_synrecv_state_fastopen() if the connection is still in
CA_Loss. If peer SACKs triggered fast recovery, then
tcp_rcv_synrecv_state_fastopen() can't safely undo.
Fixes: 794200d662 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently if attribute parsing fails and the genl family
does not support parallel operation, the error code returned
by __nlmsg_parse() is discarded by genl_family_rcv_msg_attrs_parse().
Be sure to report the error for all genl families.
Fixes: c10e6cf85e ("net: genetlink: push attrbuf allocation and parsing to a separate function")
Fixes: ab5b526da0 ("net: genetlink: always allocate separate attrs for dumpit ops")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to commit c543cb4a5f ("ipv4: ensure rcu_read_lock() in
ipv4_link_failure()"), __ip_options_compile() must be called under rcu
protection.
Fixes: 3da1ed7ac3 ("net: avoid use IPCB in cipso_v4_error")
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the forceadd option is enabled, the hash:* types should find and replace
the first entry in the bucket with the new one if there are no reuseable
(deleted or timed out) entries. However, the position index was just not set
to zero and remained the invalid -1 if there were no reuseable entries.
Reported-by: syzbot+6a86565c74ebe30aea18@syzkaller.appspotmail.com
Fixes: 23c42a403a ("netfilter: ipset: Introduction of new commands and protocol version 7")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
In the case of huge hash:* types of sets, due to the single spinlock of
a set the processing of the whole set under spinlock protection could take
too long.
There were four places where the whole hash table of the set was processed
from bucket to bucket under holding the spinlock:
- During resizing a set, the original set was locked to exclude kernel side
add/del element operations (userspace add/del is excluded by the
nfnetlink mutex). The original set is actually just read during the
resize, so the spinlocking is replaced with rcu locking of regions.
However, thus there can be parallel kernel side add/del of entries.
In order not to loose those operations a backlog is added and replayed
after the successful resize.
- Garbage collection of timed out entries was also protected by the spinlock.
In order not to lock too long, region locking is introduced and a single
region is processed in one gc go. Also, the simple timer based gc running
is replaced with a workqueue based solution. The internal book-keeping
(number of elements, size of extensions) is moved to region level due to
the region locking.
- Adding elements: when the max number of the elements is reached, the gc
was called to evict the timed out entries. The new approach is that the gc
is called just for the matching region, assuming that if the region
(proportionally) seems to be full, then the whole set does. We could scan
the other regions to check every entry under rcu locking, but for huge
sets it'd mean a slowdown at adding elements.
- Listing the set header data: when the set was defined with timeout
support, the garbage collector was called to clean up timed out entries
to get the correct element numbers and set size values. Now the set is
scanned to check non-timed out entries, without actually calling the gc
for the whole set.
Thanks to Florian Westphal for helping me to solve the SOFTIRQ-safe ->
SOFTIRQ-unsafe lock order issues during working on the patch.
Reported-by: syzbot+4b0e9d4ff3cf117837e5@syzkaller.appspotmail.com
Reported-by: syzbot+c27b8d5010f45c666ed1@syzkaller.appspotmail.com
Reported-by: syzbot+68a806795ac89df3aa1c@syzkaller.appspotmail.com
Fixes: 23c42a403a ("netfilter: ipset: Introduction of new commands and protocol version 7")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
The below-mentioned commit changed the code to unlock *inside*
the function, but previously the unlock was *outside*. It failed
to remove the outer unlock, however, leading to double unlock.
Fix this.
Fixes: 33483a6b88 ("mac80211: fix missing unlock on error in ieee80211_mark_sta_auth()")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Link: https://lore.kernel.org/r/20200221104719.cce4741cf6eb.I671567b185c8a4c2409377e483fd149ce590f56d@changeid
[rewrite commit message to better explain what happened]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since nl_groups is a u32 we can't bind more groups via ->bind
(netlink_bind) call, but netlink has supported more groups via
setsockopt() for a long time and thus nlk->ngroups could be over 32.
Recently I added support for per-vlan notifications and increased the
groups to 33 for NETLINK_ROUTE which exposed an old bug in the
netlink_bind() code causing out-of-bounds access on archs where unsigned
long is 32 bits via test_bit() on a local variable. Fix this by capping the
maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively
capping them at 32 which is the minimum of allocated groups and the
maximum groups which can be bound via netlink_bind().
CC: Christophe Leroy <christophe.leroy@c-s.fr>
CC: Richard Guy Briggs <rgb@redhat.com>
Fixes: 4f52090052 ("netlink: have netlink per-protocol bind function return an error code.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The description says 'If unsure, say N.' but
the module is built as M by default (once
the dependencies are satisfied).
When the module is selected (Y or M), it enables
NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS
which alter kernel internal structures.
We (Android Studio Emulator) currently do not
use this module and think this it is more consistent
to have it disabled by default as opposite to
disabling it explicitly to prevent enabling
NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
net/openvswitch/flow_netlink.c: In function ‘validate_set’:
net/openvswitch/flow_netlink.c:2711:29: warning: statement will never be executed [-Wswitch-unreachable]
2711 | const struct ovs_key_ipv4 *ipv4_key;
| ^~~~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
net/ipv6/ip6_gre.c: In function ‘ip6gre_err’:
net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable]
440 | struct ipv6_tlv_tnl_enc_lim *tel;
| ^~~
net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’:
net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable]
520 | struct ipv6_tlv_tnl_enc_lim *tel;
| ^~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
net/core/skbuff.c: In function ‘skb_checksum_setup_ip’:
net/core/skbuff.c:4809:7: warning: statement will never be executed [-Wswitch-unreachable]
4809 | int err;
| ^~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-02-19
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 93 insertions(+), 31 deletions(-).
The main changes are:
1) batched bpf hashtab fixes from Brian and Yonghong.
2) various selftests and libbpf fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As of the below commit, udp sockets bound to a specific address can
coexist with one bound to the any addr for the same port.
The commit also phased out the use of socket hashing based only on
port (hslot), in favor of always hashing on {addr, port} (hslot2).
The change broke the following behavior with disconnect (AF_UNSPEC):
server binds to 0.0.0.0:1337
server connects to 127.0.0.1:80
server disconnects
client connects to 127.0.0.1:1337
client sends "hello"
server reads "hello" // times out, packet did not find sk
On connect the server acquires a specific source addr suitable for
routing to its destination. On disconnect it reverts to the any addr.
The connect call triggers a rehash to a different hslot2. On
disconnect, add the same to return to the original hslot2.
Skip this step if the socket is going to be unhashed completely.
Fixes: 4cdeeee925 ("net: udp: prefer listeners bound to an address")
Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code doesn't check if tcp sequence number is starting from (/after)
1st record's start sequnce number. It only checks if seq number is before
1st record's end sequnce number. This problem will always be a possibility
in re-transmit case. If a record which belongs to a requested seq number is
already deleted, tls_get_record will start looking into list and as per the
check it will look if seq number is before the end seq of 1st record, which
will always be true and will return 1st record always, it should in fact
return NULL.
As part of the fix, start looking each record only if the sequence number
lies in the list else return NULL.
There is one more check added, driver look for the start marker record to
handle tcp packets which are before the tls offload start sequence number,
hence return 1st record if the record is tls start marker and seq number is
before the 1st record's starting sequence number.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
node_db is traversed using list_for_each_entry_rcu
outside an RCU read-side critical section but under the protection
of hsr->list_lock.
Hence, add corresponding lockdep expression to silence false-positive
warnings, and harden RCU lists.
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This batch contains Netfilter fixes for net:
1) Restrict hashlimit size to 1048576, from Cong Wang.
2) Check for offload flags from nf_flow_table_offload_setup(),
this fixes a crash in case the hardware offload is disabled.
From Florian Westphal.
3) Three preparation patches to extend the conntrack clash resolution,
from Florian.
4) Extend clash resolution to deal with DNS packets from the same flow
racing to set up the NAT configuration.
5) Small documentation fix in pipapo, from Stefano Brivio.
6) Remove misleading unlikely() from pipapo_refill(), also from Stefano.
7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually
triggering another problem, still under discussion, another patch to
fix this will follow up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
I originally used unlikely() in the if (match_only) clause, which
we hit on the mapping table for the last field in a set, to ensure
we avoid branching to the rest of for loop body, which is executed
more frequently.
However, Pablo reports, this is confusing as it gives the impression
that this is not a common case, and it's actually not the intended
usage of unlikely().
I couldn't observe any statistical difference in matching rates on
x864_64 and aarch64 without it, so just drop it.
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In both insertion and lookup examples, the two element pointers
of rule mapping tables were swapped. Fix that.
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit ba27b4cdaa
Ahmed reported ouf-of-order issues bisected to commit ba27b4cdaa
("net: dev: introduce support for sch BYPASS for lockless qdisc").
I can't find any working solution other than a plain revert.
This will introduce some minor performance regressions for
pfifo_fast qdisc. I plan to address them in net-next with more
indirect call wrapper boilerplate for qdiscs.
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes: ba27b4cdaa ("net: dev: introduce support for sch BYPASS for lockless qdisc")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter reports static checker warnings due to bogus BIT() usage:
net/mptcp/subflow.c:571 subflow_write_space() warn: test_bit() takes a bit number
net/mptcp/subflow.c:694 subflow_state_change() warn: test_bit() takes a bit number
net/mptcp/protocol.c:261 ssk_check_wmem() warn: test_bit() takes a bit number
[..]
This is harmless (we use bits 1 & 2 instead of 0 and 1), but would
break eventually when adding BIT(5) (or 6, depends on size of 'long').
Just use 0 and 1, the values are only passed to test/set/clear_bit
functions.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
