We have hit a race between cap releases and cap revoke request
that will cause the check_caps() to miss sending a cap revoke ack
to MDS. And the client will depend on the cap release to release
that revoking caps, which could be delayed for some unknown reasons.
In Kclient we have figured out the RCA about race and we need
a way to explictly trigger this manually could help to get rid
of the caps revoke stuck issue.
Link: https://tracker.ceph.com/issues/67221
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The kmalloc size of pagevec mempool is incorrectly calculated.
It misses the size of page pointer and only accounts the number for the array.
Fixes: a0102bda5b ("ceph: move sb->wb_pagevec_pool to be a global mempool")
Signed-off-by: ethanwu <ethanwu@synology.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Yes, yes, I know the slab people were planning on going slow and letting
every subsystem fight this thing on their own. But let's just rip off
the band-aid and get it over and done with. I don't want to see a
number of unnecessary pull requests just to get rid of a flag that no
longer has any meaning.
This was mainly done with a couple of 'sed' scripts and then some manual
cleanup of the end result.
Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we converted cephfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This parameter is used to decide if we allow
to perform IO on idmapped mount in case when MDS lacks
support of CEPHFS_FEATURE_HAS_OWNER_UIDGID feature.
In this case we can't properly handle MDS permission
checks and if UID/GID-based restrictions are enabled
on the MDS side then IO requests which go through an
idmapped mount may fail with -EACCESS/-EPERM.
Fortunately, for most of users it's not a case and
everything should work fine. But we put work "unsafe"
in the module parameter name to warn users about
possible problems with this feature and encourage
update of cephfs MDS.
Suggested-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The sync_filesystem() will flush all the dirty buffer and submit the
osd reqs to the osdc and then is blocked to wait for all the reqs to
finish. But the when the reqs' replies come, the reqs will be removed
from osdc just before the req->r_callback()s are called. Which means
the sync_filesystem() will be woke up by leaving the req->r_callback()s
are still running.
This will be buggy when the waiter require the req->r_callback()s to
release some resources before continuing. So we need to make sure the
req->r_callback()s are called before removing the reqs from the osdc.
WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b
We need to increase the blocker counter to make sure all the osd
requests' callbacks have been finished just before calling the
kill_anon_super() when unmounting.
Link: https://tracker.ceph.com/issues/58126
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When unmounting all the dirty buffers will be flushed and after
the last osd request is finished the last reference of the i_count
will be released. Then it will flush the dirty cap/snap to MDSs,
and the unmounting won't wait the possible acks, which will ihold
the inodes when updating the metadata locally but makes no sense
any more, of this. This will make the evict_inodes() to skip these
inodes.
If encrypt is enabled the kernel generate a warning when removing
the encrypt keys when the skipped inodes still hold the keyring:
WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b
Later the kernel will crash when iput() the inodes and dereferencing
the "sb->s_master_keys", which has been released by the
generic_shutdown_super().
Link: https://tracker.ceph.com/issues/59162
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add support for the test_dummy_encryption mount option. This allows us
to test the encrypted codepaths in ceph without having to manually set
keys, etc.
[ lhenriques: fix potential fsc->fsc_dummy_enc_policy memory leak in
ceph_real_mount() ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most fscrypt-enabled filesystems store the crypto context in an xattr,
but that's problematic for ceph as xatts are governed by the XATTR cap,
but we really want the crypto context as part of the AUTH cap.
Because of this, the MDS has added two new inode metadata fields:
fscrypt_auth and fscrypt_file. The former is used to hold the crypto
context, and the latter is used to track the real file size.
Parse new fscrypt_auth and fscrypt_file fields in inode traces. For now,
we don't use fscrypt_file, but fscrypt_auth is used to hold the fscrypt
context.
Allow the client to use a setattr request for setting the fscrypt_auth
field. Since this is not a standard setattr request from the VFS, we add
a new field to __ceph_setattr that carries ceph-specific inode attrs.
Have the set_context op do a setattr that sets the fscrypt_auth value,
and get_context just return the contents of that field (since it should
always be available).
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a new mount option that has the client issue sparse reads instead of
normal ones. The callers now preallocate an sparse extent buffer that
the libceph receive code can populate and hand back after the operation
completes.
After a successful sparse read, we can't use the req->r_result value to
determine the amount of data "read", so instead we set the received
length to be from the end of the last extent in the buffer. Any
interstitial holes will have been filled by the receive code.
[ xiubli: fix a double free on req reported by Ilya ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Flushing the dirty buffer may take a long time if the cluster is
overloaded or if there is network issue. So we should ping the
MDSs periodically to keep alive, else the MDS will blocklist
the kclient.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61843
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The f_frsize maybe changed in the quota size is less than the defualt
4MB.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In async unlink case the kclient won't wait for the first reply
from MDS and just drop all the links and unhash the dentry and then
succeeds immediately.
For any new create/link/rename,etc requests followed by using the
same file names we must wait for the first reply of the inflight
unlink request, or the MDS possibly will fail these following
requests with -EEXIST if the inflight async unlink request was
delayed for some reasons.
And the worst case is that for the none async openc request it will
successfully open the file if the CDentry hasn't been unlinked yet,
but later the previous delayed async unlink request will remove the
CDenty. That means the just created file is possiblly deleted later
by accident.
We need to wait for the inflight async unlink requests to finish
when creating new files/directories by using the same file names.
Link: https://tracker.ceph.com/issues/55332
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
While randstruct was satisfied with using an open-coded "void *" offset
cast for the netfs_i_context <-> inode casting, __builtin_object_size() as
used by FORTIFY_SOURCE was not as easily fooled. This was causing the
following complaint[1] from gcc v12:
In file included from include/linux/string.h:253,
from include/linux/ceph/ceph_debug.h:7,
from fs/ceph/inode.c:2:
In function 'fortify_memset_chk',
inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2,
inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2:
include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
242 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by embedding a struct inode into struct netfs_i_context (which
should perhaps be renamed to struct netfs_inode). The struct inode
vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode
structs and vfs_inode is then simply changed to "netfs.inode" in those
filesystems.
Further, rename netfs_i_context to netfs_inode, get rid of the
netfs_inode() function that converted a netfs_i_context pointer to an
inode pointer (that can now be done with &ctx->inode) and rename the
netfs_i_context() function to netfs_inode() (which is now a wrapper
around container_of()).
Most of the changes were done with:
perl -p -i -e 's/vfs_inode/netfs.inode/'g \
`git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]`
Kees suggested doing it with a pair structure[2] and a special
declarator to insert that into the network filesystem's inode
wrapper[3], but I think it's cleaner to embed it - and then it doesn't
matter if struct randomisation reorders things.
Dave Chinner suggested using a filesystem-specific VFS_I() function in
each filesystem to convert that filesystem's own inode wrapper struct
into the VFS inode struct[4].
Version #2:
- Fix a couple of missed name changes due to a disabled cifs option.
- Rename nfs_i_context to nfs_inode
- Use "netfs" instead of "nic" as the member name in per-fs inode wrapper
structs.
[ This also undoes commit 507160f46c ("netfs: gcc-12: temporarily
disable '-Wattribute-warning' for now") that is no longer needed ]
Fixes: bc899ee1c8 ("netfs: Add a netfs inode context")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
cc: Jonathan Corbet <corbet@lwn.net>
cc: Eric Van Hensbergen <ericvh@gmail.com>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: William Kucharski <william.kucharski@oracle.com>
cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
cc: Dave Chinner <david@fromorbit.com>
cc: linux-doc@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1]
Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2]
Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3]
Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4]
Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since CephFS makes no attempt to maintain atime, we shouldn't
try to update it in mmap and generic read cases and ignore updating
it in direct and sync read cases.
And even we update it in mmap and generic read cases we will drop
it and won't sync it to MDS. And we are seeing the atime will be
updated and then dropped to the floor again and again.
URL: https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/thread/VSJM7T4CS5TDRFF6XFPIYMHP75K73PZ6/
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- several changes to how snap context and snap realms are tracked
(Xiubo Li). In particular, this should resolve a long-standing
issue of high kworker CPU usage and various stalls caused by
needless iteration over all inodes in the snap realm.
- async create fixes to address hangs in some edge cases (Jeff Layton)
- support for getvxattr MDS op for querying server-side xattrs, such
as file/directory layouts and ephemeral pins (Milind Changire)
- average latency is now maintained for all metrics (Venky Shankar)
- some tweaks around handling inline data to make it fit better with
netfs helper library (David Howells)
Also a couple of memory leaks got plugged along with a few assorted
fixups. Last but not least, Xiubo has stepped up to serve as a CephFS
co-maintainer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmI8qE4THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9UvB/kBZt4mkyjqRC+KJ5rukw5q7lyAYGC1
QYVbuTuIJydyDvqQp9pXYFndlj10pb7ULnUlQlcBfntVAr9s7xx7ZKrKciE48MPT
vLiJmq3MpEedM4oE4FgcJbmHtltDgZWvOxXB7renpHNeHuPeezNpKzaKQXGUHUDo
+7cX5XWBzZk+AYbEvxQUsjDozcgDp31qf015mAX3r0P7XFkBB7xwZA7sb7Cw1GEr
S6ZdlNoFcWUq0ULUdh2C7l5a2mKQnVnpOO3TMjE6tSqJ74iozRy4tO9aFgj99NEn
D1rQbCLr3JPfY//JFyqEOIDYf3hepOMmEkoGHOFukckFKUe3yfJJxa3r
=ESr5
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.18-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- several changes to how snap context and snap realms are tracked
(Xiubo Li). In particular, this should resolve a long-standing
issue of high kworker CPU usage and various stalls caused by
needless iteration over all inodes in the snap realm.
- async create fixes to address hangs in some edge cases (Jeff
Layton)
- support for getvxattr MDS op for querying server-side xattrs, such
as file/directory layouts and ephemeral pins (Milind Changire)
- average latency is now maintained for all metrics (Venky Shankar)
- some tweaks around handling inline data to make it fit better with
netfs helper library (David Howells)
Also a couple of memory leaks got plugged along with a few assorted
fixups. Last but not least, Xiubo has stepped up to serve as a CephFS
co-maintainer"
* tag 'ceph-for-5.18-rc1' of https://github.com/ceph/ceph-client: (27 commits)
ceph: fix memory leak in ceph_readdir when note_last_dentry returns error
ceph: uninitialized variable in debug output
ceph: use tracked average r/w/m latencies to display metrics in debugfs
ceph: include average/stdev r/w/m latency in mds metrics
ceph: track average r/w/m latency
ceph: use ktime_to_timespec64() rather than jiffies_to_timespec64()
ceph: assign the ci only when the inode isn't NULL
ceph: fix inode reference leakage in ceph_get_snapdir()
ceph: misc fix for code style and logs
ceph: allocate capsnap memory outside of ceph_queue_cap_snap()
ceph: do not release the global snaprealm until unmounting
ceph: remove incorrect and unused CEPH_INO_DOTDOT macro
MAINTAINERS: add Xiubo Li as cephfs co-maintainer
ceph: eliminate the recursion when rebuilding the snap context
ceph: do not update snapshot context when there is no new snapshot
ceph: zero the dir_entries memory when allocating it
ceph: move to a dedicated slabcache for ceph_cap_snap
ceph: add getvxattr op
libceph: drop else branches in prepare_read_data{,_cont}
ceph: fix comments mentioning i_mutex
...
The bdi congestion tracking in not widely used and will be removed.
CEPHfs is one of a small number of filesystems that uses it, setting just
the async (write) congestion flags at what it determines are appropriate
times.
The only remaining effect of the async flag is to cause (some)
WB_SYNC_NONE writes to be skipped.
So instead of setting the flag, set an internal flag and change:
- .writepages to do nothing if WB_SYNC_NONE and the flag is set
- .writepage to return AOP_WRITEPAGE_ACTIVATE if WB_SYNC_NONE and the
flag is set.
The writepages change causes a behavioural change in that pageout() can
now return PAGE_ACTIVATE instead of PAGE_KEEP, so SetPageActive() will
be called on the page which (I think) wil further delay the next attempt
at writeout. This might be a good thing.
Link: https://lkml.kernel.org/r/164549983739.9187.14895675781408171186.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There could be huge number of capsnaps around at any given time. On
x86_64 the structure is 248 bytes, which will be rounded up to 256 bytes
by kzalloc. Move this to a dedicated slabcache to save 8 bytes for each.
[ jlayton: use kmem_cache_zalloc ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
by Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota
and a new mount option for turning on unbuffered I/O mode globally
instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmHpP5ATHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi0TgB/480i2lPHgA3ujJNqo5Q6z+W0vtTA2+
Wx+4rAUgIESJVunbFxvecPbzyUXTe7wWFI11TCVHPpf6GyIIDTD+uHd3kKWtLsfL
Zkk1/2PN9Q5Dh29R+N8rP9NaP8tIaTQjyiO3iqmRZlo+k0Z/lYtWUb+fUP05XlVY
ML/ktW543tkKeYwl3SWdW5MqAAOVGDbTt+L51CraDhVoiUac5ptkP+cmDmIqsnGa
ZHVqpwugxgndEIyuBHDLBps+5/LrEaL10xDhGcMtP9hwGYhyNr6Yj+azfGtHWwOi
jdVsdHDiecUBVtGyZ351Y4pCMOmP0uJif6MOUZFXYYSSeUBUhH8UjgEi
=jcte
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlight is the new mount "device" string syntax implemented by
Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota and
a new mount option for turning on unbuffered I/O mode globally instead
of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)"
* tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client:
ceph: move CEPH_SUPER_MAGIC definition to magic.h
ceph: remove redundant Lsx caps check
ceph: add new "nopagecache" option
ceph: don't check for quotas on MDS stray dirs
ceph: drop send metrics debug message
rbd: make const pointer spaces a static const array
ceph: Fix incorrect statfs report for small quota
ceph: mount syntax module parameter
doc: document new CephFS mount device syntax
ceph: record updated mon_addr on remount
ceph: new device mount syntax
libceph: rename parse_fsid() to ceph_parse_fsid() and export
libceph: generalize addr/ip parsing based on delimiter
The uapi headers are missing the ceph definition. Move it there so
userland apps can ID cephfs.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
CephFS is a bit unlike most other filesystems in that it only
conditionally does buffered I/O based on the caps that it gets from the
MDS. In most cases, unless there is contended access for an inode the
MDS does give Fbc caps to the client, so the unbuffered codepaths are
only infrequently traveled and are difficult to test.
At one time, the "-o sync" mount option would give you this behavior,
but that was removed in commit 7ab9b38070 ("ceph: Don't use
ceph-sync-mode for synchronous-fs.").
Add a new mount option to tell the client to ignore Fbc caps when doing
I/O, and to use the synchronous codepaths exclusively, even on
non-O_DIRECT file descriptors. We already have an ioctl that forces this
behavior on a per-file basis, so we can just always set the CEPH_F_SYNC
flag in the file description on such mounts.
Additionally, this patch also changes the client to not request Fbc when
doing direct I/O. We aren't using the cache with O_DIRECT so we don't
have any need for those caps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Greg Farnum <gfarnum@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add read-only module parameters for supported mount syntaxes. Primary
user is the user-space mount helper for catching v2 syntax bugs during
testing by cross verifying if the kernel supports v2 syntax on mount
failure.
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Note that the new monitors are just shown in /proc/mounts.
Ceph does not (re)connect to new monitors yet.
[ jlayton: s/printk\(KERN_NOTICE/pr_notice(/
s/strcmp/strcmp_null/ ]
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Old mount device syntax (source) has the following problems:
- mounts to the same cluster but with different fsnames
and/or creds have identical device string which can
confuse xfstests.
- Userspace mount helper tool resolves monitor addresses
and fill in mon addrs automatically, but that means the
device shown in /proc/mounts is different than what was
used for mounting.
New device syntax is as follows:
cephuser@fsid.mycephfs2=/path
Note, there is no "monitor address" in the device string.
That gets passed in as mount option. This keeps the device
string same when monitor addresses change (on remounts).
Also note that the userspace mount helper tool is backward
compatible. I.e., the mount helper will fallback to using
old syntax after trying to mount with the new syntax.
[ idryomov: drop CEPH_MON_ADDR_MNTOPT_DELIM ]
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
... and remove hardcoded function name in ceph_parse_ips().
[ idryomov: delim parameter, drop CEPH_ADDR_PARSE_DEFAULT_DELIM ]
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_statfs currently stuffs the cluster fsid into the f_fsid field.
This was fine when we only had a single filesystem per cluster, but now
that we have multiples we need to use something that will vary between
them.
Change ceph_statfs to xor each 32-bit chunk of the fsid (aka cluster id)
into the lower bits of the statfs->f_fsid. Change the lower bits to hold
the fscid (filesystem ID within the cluster).
That should give us a value that is guaranteed to be unique between
filesystems within a cluster, and should minimize the chance of
collisions between mounts of different clusters.
URL: https://tracker.ceph.com/issues/52812
Reported-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
As Greg pointed out, if we get a mangled mdsmap or fsmap, then something
has gone very wrong, and we should avoid doing any activity on the
filesystem.
When this occurs, shut down the mount the same way we would with a
forced umount by calling ceph_umount_begin when decoding fails on either
map. This causes most operations done against the filesystem to return
an error. Any dirty data or caps in the cache will be dropped as well.
The effect is not reversible, so the only remedy is to umount.
[ idryomov: print fsmap decoding error ]
URL: https://tracker.ceph.com/issues/52303
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Greg Farnum <gfarnum@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Async dirops have been supported in mainline kernels for quite some time
now, and we've recently (as of June) started doing regular testing in
teuthology with '-o nowsync'. There were a few issues, but we've sorted
those out now.
Enable async dirops by default, and change /proc/mounts to show "wsync"
when they are disabled rather than "nowsync" when they are enabled.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently when mounting, we may end up finding an existing superblock
that corresponds to a blocklisted MDS client. This means that the new
mount ends up being unusable.
If we've found an existing superblock with a client that is already
blocklisted, and the client is not configured to recover on its own,
fail the match. Ditto if the superblock has been forcibly unmounted.
While we're in here, also rename "other" to the more conventional "fsc".
Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When recovering a session (a'la recover_session=clean), we want to do
all of the operations that we do on a forced umount, but changing the
mount state to SHUTDOWN is can cause queued MDS requests to fail when
the session comes back. Most of those can idle until the session is
recovered in this situation.
Reserve SHUTDOWN state for forced umount, and make a new RECOVER state
for the forced reconnect situation. Change several tests for equality with
SHUTDOWN to test for that or RECOVER.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
ceph open-codes this around some other activity and the rationale
for it isn't clear. There is no need to delay free_anon_bdev until
the end of kill_sb.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When doing some testing recently, I hit some page allocation failures
on mount, when creating the wb_pagevec_pool for the mount. That
requires 128k (32 contiguous pages), and after thrashing the memory
during an xfstests run, sometimes that would fail.
128k for each mount seems like a lot to hold in reserve for a rainy
day, so let's change this to a global mempool that gets allocated
when the module is plugged in.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Drop duplicated words "down" and "the" in fs/ceph/.
[ idryomov: merge into a single patch ]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This will send the caps/read/write/metadata metrics to any available MDS
once per second, which will be the same as the userland client. It will
skip the MDS sessions which don't support the metric collection, as the
MDSs will close socket connections when they get an unknown type
message.
We can disable the metric sending via the disable_send_metrics module
parameter.
[ jlayton: fix up endianness bug in ceph_mdsc_send_metrics() ]
URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The MDS is getting a new lock-caching facility that will allow it
to cache the necessary locks to allow asynchronous directory operations.
Since the CEPH_CAP_FILE_* caps are currently unused on directories,
we can repurpose those bits for this purpose.
When performing an unlink, if we have Fx on the parent directory,
and CEPH_CAP_DIR_UNLINK (aka Fr), and we know that the dentry being
removed is the primary link, then then we can fire off an unlink
request immediately and don't need to wait on reply before returning.
In that situation, just fix up the dcache and link count and return
immediately after issuing the call to the MDS. This does mean that we
need to hold an extra reference to the inode being unlinked, and extra
references to the caps to avoid races. Those references are put and
error handling is done in the r_callback routine.
If the operation ends up failing, then set a writeback error on the
directory inode, and the inode itself that can be fetched later by
an fsync on the dir.
The behavior of dir caps is slightly different from caps on normal
files. Because these are just considered an optimization, if the
session is reconnected, we will not automatically reclaim them. They
are instead considered lost until we do another synchronous op in the
parent directory.
Async dirops are enabled via the "nowsync" mount option, which is
patterned after the xfs "wsync" mount option. For now, the default
is "wsync", but eventually we may flip that.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
On my machine (x86_64) this struct is 952 bytes, which gets rounded up
to 1024 by kmalloc. Move this to a dedicated slabcache, so we can
allocate them without the extra 72 bytes of overhead per.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For the old mount API, the module parameters parseing function will
be called in ceph_mount() and also just after the default posix acl
flag set, so we can control to enable/disable it via the mount option.
But for the new mount API, it will call the module parameters
parseing function before ceph_get_tree(), so the posix acl will always
be enabled.
Fixes: 82995cc6c5 ("libceph, rbd, ceph: convert to use the new mount API")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
syzbot reported that 4fbc0c711b ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.
We don't really need the supplied server path, so canonicalize it
in place and compare it directly. To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.
Fixes: 4fbc0c711b ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
Don't bother with "mixed" options that would allow both the
form with and without argument (i.e. both -o foo and -o foo=bar).
Rather than trying to shove both into a single fs_parameter_spec,
allow having with-argument and no-argument specs with the same
name and teach fs_parse to handle that.
There are very few options of that sort, and they are actually
easier to handle that way - callers end up with less postprocessing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... turning it into struct p_log embedded into fs_context. Initialize
the prefix with fs_type->name, turning fs_parse() into a trivial
inline wrapper for __fs_parse().
This makes fs_parameter_description->name completely unused.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
