Add 2 byte padding to napi_gro_cb struct to ensure zeroed member is
aligned after flush_id member was removed in the original commit.
Fixes: 4b0ebbca3e ("net: gro: move L3 flush checks to tcp_gro_receive and udp_gro_receive_segment")
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/fca08735-c245-49e5-af72-82900634f144@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support for posted interrupts on bare metal
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the corresponding
device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmZBGUITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYod3xD/98Xa4qZN7eceyyGUhgXnPLOKQzGQ7k
7cmhsoAYjABeXLvuAvtKePL7ky7OPcqVW2E/g0+jdZuRDkRDbnVkM7CDMRTyL0/b
BZLhVAXyANKjK79a5WvjL0zDasYQRQ16MQJ6TPa++mX0KhZSI7KvXWIqPWov5i02
n8UbPUraH5bJi3qGKm6u4n2261Be1gtDag0ZjmGma45/3wsn3bWPoB7iPK6qxmq3
Q7VARPXAcRp5wYACk6mCOM1dOXMUV9CgI5AUk92xGfXi4RAdsFeNSzeQWn9jHWOf
CYbbJjNl4QmGP4IWmy6/Up4vIiEhUCOT2DmHsygrQTs/G+nPnMAe1qUuDuECiofj
iToBL3hn1dHG8uINKOB81MJ33QEGWyYWY8PxxoR3LMTrhVpfChUlJO8T2XK5nu+i
2EA6XLtJiHacpXhn8HQam0aQN9nvi4wT1LzpkhmboyCQuXTiXuJNbyLIh5TdFa1n
DzqAGhRB67z6eGevJJ7kTI1X71W0poMwYlzCU8itnLOK8np0zFQ8bgwwqm9opZGq
V2eSDuZAbqXVolzmaF8NSfM+b/R9URQtWsZ8cEc+/OdVV4HR4zfeqejy60TuV/4G
39CTnn8vPBKcRSS6CAcJhKPhzIvHw4EMhoU4DJKBtwBdM58RyP9NY1wF3rIPJIGh
sl61JBuYYuIZXg==
=bqLN
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 interrupt handling updates from Thomas Gleixner:
"Add support for posted interrupts on bare metal.
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the
corresponding device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter"
* tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Use existing helper for pending vector check
iommu/vt-d: Enable posted mode for device MSIs
iommu/vt-d: Make posted MSI an opt-in command line option
x86/irq: Extend checks for pending vectors to posted interrupts
x86/irq: Factor out common code for checking pending interrupts
x86/irq: Install posted MSI notification handler
x86/irq: Factor out handler invocation from common_interrupt()
x86/irq: Set up per host CPU posted interrupt descriptors
x86/irq: Reserve a per CPU IDT vector for posted MSIs
x86/irq: Add a Kconfig option for posted MSI
x86/irq: Remove bitfields in posted interrupt descriptor
x86/irq: Unionize PID.PIR for 64bit access w/o casting
KVM: VMX: Move posted interrupt descriptor out of VMX code
- Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the lockup
detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to retrieve
the delta to the snapshot. Use this new mechanism in the watchdog code
to do a two stage lockup analysis by taking the snapshot and printing
the deltas for the topmost active interrupts on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the global
counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that they
are not delivered before the system resumes the device drivers when
coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU are
migrated to a different CPU in the affinity mask. This can fail when
the CPUs have no vectors left. Instead of giving up try to migrate it
to any online CPU and thereby breaking the affinity setting in order to
prevent a stale device interrupt which targets an offline CPU
- The usual small cleanups
- Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=jFLf
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
The sad state of TSC being notoriously non-sychronized for several
decades caused the kernel to grow quite rigorous sanity checks to detect
whether the TSC is valid to be used for timekeeping.
The TSC ADJUST MSR provides the offset between the initial TSC value
after hardware reset and later modifications. This allows to detect cases
where firmware tampers with the TSC and also allows to correct the
firmware induced damage by resetting the offset in a controlled way.
The universal correct rule is that the TSC ADJUST value has to be
consistent within all CPUs of a socket.
The kernel further assumes that the TSC offset should be consistent
between sockets. That's not really correct as systems with a huge number
of sockets are not architecurally guaranteed to reset the per socket TSC
base synchronously.
In case that the per socket offset is not consistent the kernel resets it
to the offset of the boot CPU and then does a synchronization check which
corrects for the inter socket delays.
That works most of the time, but it is suboptimal as the firmware has
eventually better information about the per socket offset and on sane
systems that offset should just work in the validation checks.
-----BEGIN PGP SIGNATURE-----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=W1qL
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timers update from Thomas Gleixner:
"A single update for the TSC synchronixation sanity checks:
The sad state of TSC being notoriously non-sychronized for several
decades caused the kernel to grow quite rigorous sanity checks to
detect whether the TSC is valid to be used for timekeeping.
The TSC ADJUST MSR provides the offset between the initial TSC value
after hardware reset and later modifications. This allows to detect
cases where firmware tampers with the TSC and also allows to correct
the firmware induced damage by resetting the offset in a controlled
way.
The universal correct rule is that the TSC ADJUST value has to be
consistent within all CPUs of a socket.
The kernel further assumes that the TSC offset should be consistent
between sockets. That's not really correct as systems with a huge
number of sockets are not architecurally guaranteed to reset the per
socket TSC base synchronously.
In case that the per socket offset is not consistent the kernel resets
it to the offset of the boot CPU and then does a synchronization check
which corrects for the inter socket delays.
That works most of the time, but it is suboptimal as the firmware has
eventually better information about the per socket offset and on sane
systems that offset should just work in the validation checks"
* tag 'x86-timers-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Trust initial offset in architectural TSC-adjust MSRs
- Core code:
- Make timekeeping and VDSO time readouts resilent against math overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle the
multiplication overflow.
This functionality is enabled unconditionally in the kernel, but made
conditional in the VDSO code. The latter is conditional because it
allows architectures to optimize the check so it is not causing
performance regressions.
On X86 this is achieved by reworking the existing check for negative
TSC deltas as a negative delta obviously exceeds the maximum
deferrement when it is evaluated as an unsigned value. That avoids two
conditionals in the hotpath and allows to hide both the negative delta
and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
- Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers.
-----BEGIN PGP SIGNATURE-----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=pL+S
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core code:
- Make timekeeping and VDSO time readouts resilent against math
overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle
the multiplication overflow.
This functionality is enabled unconditionally in the kernel, but
made conditional in the VDSO code. The latter is conditional
because it allows architectures to optimize the check so it is not
causing performance regressions.
On X86 this is achieved by reworking the existing check for
negative TSC deltas as a negative delta obviously exceeds the
maximum deferrement when it is evaluated as an unsigned value. That
avoids two conditionals in the hotpath and allows to hide both the
negative delta and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers"
* tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info const
clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimer
clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probe
clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC
rust: time: doc: Add missing C header links
clocksource: Make the int help prompt unit readable in ncurses
hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active()
timerqueue: Remove never used function timerqueue_node_expires()
rust: time: Add Ktime
vdso: Fix powerpc build U64_MAX undeclared error
clockevents: Convert s[n]printf() to sysfs_emit()
clocksource: Convert s[n]printf() to sysfs_emit()
clocksource: Make watchdog and suspend-timing multiplication overflow safe
timekeeping: Let timekeeping_cycles_to_ns() handle both under and overflow
timekeeping: Make delta calculation overflow safe
timekeeping: Prepare timekeeping_cycles_to_ns() for overflow safety
timekeeping: Fold in timekeeping_delta_to_ns()
timekeeping: Consolidate timekeeping helpers
timekeeping: Refactor timekeeping helpers
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmZCbbIACgkQaDWVMHDJ
krC5Dw/9GsRdLN4lGkUhJJ9p1iNbB3qXiOgNIS9ROsh0VHI0FXf36XTsuoWE5+nT
eXb/4s0oWApqs2YbriquILfk7Q7fj0/fOYIJJ182sB/WlXBWNIjoR42rNPqDbxA8
yJVoY+RuJ1TClMYMOt6vN3hLbcOd7TU61mXmZexvI48p4GsKKYjqh9LHcaLuTUFU
Ibo4tJKxJQRCvY1pX9aJ6ICkMBpewFTrNcnm5iDnGGG+7f73Pq7+9ZdhWjPPt3K5
u/BaQtjTvPB7PlwiKV29c37Ud6FMv/CwOI9rdwRrJRHog6jzqcJd5IV2XlfaYoXL
se0yOptSP96MljguWFJ2yIynWtFYJqsmrHOSvytT9VxM10izUqEhU+qrkWzP1sqR
NN701cH4FUZV9odYx5kwhquAVecgpW//W47hp4Ghq3BBQvX8Y158Blqem+VDZzYU
6fxz/IxX1SURN/yEAompReMdoBdI+vFwwM3ZKCLMY3ZfUaDaZiWGXjhSBHzzGSVD
tg3Clq7AXHcVbRe8h1d0CTh4O8XRLMJDcUM5rq06agrDuJf4F8tXqNZoYSku4Haw
dd+U61bWAOFwv7MkePNjg8xglBSV3gyS4uoCxolZvScHz/nxLD+wLWnb6Z5oMlLn
ZroyXUMM2FMhoK4ODp3l1OzSRMj780QCvJCRW6SeJ4u2wuCoXdE=
=4t5X
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC update from Dave Hansen:
"Coccinelle complained about some 64-bit divisions, but the divisor was
really just a 32-bit value being stored as 'unsigned long'.
Fixing the types fixes the warning"
* tag 'x86_apic_for_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Improve data types to fix Coccinelle warnings
-----BEGIN PGP SIGNATURE-----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=Z3p4
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Small cleanups and improvements
* tag 'x86_sev_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Make the VMPL0 checking more straight forward
x86/sev: Rename snp_init() in boot/compressed/sev.c
x86/sev: Shorten struct name snp_secrets_page_layout to snp_secrets_page
- Add support MediaTek MT7921S SDIO
- Various fixes for -Wflex-array-member-not-at-end and -Wfamnae
- Add USB HW IDs for MT7921/MT7922/MT7925
- Add support for Intel BlazarI and Filmore Peak2 (BE201)
- Add initial support for Intel PCIe driver
- Remove HCI_AMP support
-----BEGIN PGP SIGNATURE-----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=8ZcG
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support MediaTek MT7921S SDIO
- Various fixes for -Wflex-array-member-not-at-end and -Wfamnae
- Add USB HW IDs for MT7921/MT7922/MT7925
- Add support for Intel BlazarI and Filmore Peak2 (BE201)
- Add initial support for Intel PCIe driver
- Remove HCI_AMP support
* tag 'for-net-next-2024-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (47 commits)
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
Bluetooth: hci_conn: Use struct_size() in hci_le_big_create_sync()
Bluetooth: qca: clean up defines
...
====================
Link: https://lore.kernel.org/r/20240514150206.606432-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
goal of freeing them sooner rather than later
- Other code improvements and cleanups
-----BEGIN PGP SIGNATURE-----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=8EKr
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add a tracepoint to read out LLC occupancy of resource monitor IDs
with the goal of freeing them sooner rather than later
- Other code improvements and cleanups
* tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Add tracepoint for llc_occupancy tracking
x86/resctrl: Rename pseudo_lock_event.h to trace.h
x86/resctrl: Simplify call convention for MSR update functions
x86/resctrl: Pass domain to target CPU
with 32-bit guests, seeing stale instruction bytes, to one working on
a buffer, like the rest of the alternatives code does
- Add a long overdue check to the X86_FEATURE flag modifying functions to warn
when former get changed in a non-compatible way after alternatives have been
patched because those changes will be already wrong
- Other cleanups
-----BEGIN PGP SIGNATURE-----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=gaPh
-----END PGP SIGNATURE-----
Merge tag 'x86_alternatives_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm alternatives updates from Borislav Petkov:
- Switch the in-place instruction patching which lead to at least one
weird bug with 32-bit guests, seeing stale instruction bytes, to one
working on a buffer, like the rest of the alternatives code does
- Add a long overdue check to the X86_FEATURE flag modifying functions
to warn when former get changed in a non-compatible way after
alternatives have been patched because those changes will be already
wrong
- Other cleanups
* tag 'x86_alternatives_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Remove alternative_input_2()
x86/alternatives: Sort local vars in apply_alternatives()
x86/alternatives: Optimize optimize_nops()
x86/alternatives: Get rid of __optimize_nops()
x86/alternatives: Use a temporary buffer when optimizing NOPs
x86/alternatives: Catch late X86_FEATURE modifiers
one based on the number of CPUs present in the system
-----BEGIN PGP SIGNATURE-----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=enB0
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS update from Borislav Petkov:
- Change the fixed-size buffer for MCE records to a dynamically sized
one based on the number of CPUs present in the system
* tag 'ras_core_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Dynamically size space for machine check records
Minor refactor and s/TX_WAIT_TIMEOUT_MS/BTINTEL_PCIE_TX_WAIT_TIMEOUT_MS/g.
Fixes: 6e65a09f92 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If hdev->le_num_of_adv_sets is set to 1 it means that only handle 0x00
can be used, but since the MGMT interface instances start from 1
(instance 0 means all instances in case of MGMT_OP_REMOVE_ADVERTISING)
the code needs to map the instance to handle otherwise users will not be
able to advertise as instance 1 would attempt to use handle 0x01.
Fixes: 1d0fac2c38 ("Bluetooth: Use controller sets when available")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix the following compiler warning reported for ARCH=arm
multi_v7_defconfig.
In file included from drivers/bluetooth/hci_ldisc.c:34:
drivers/bluetooth/btintel.h:373:13: warning: 'btintel_hw_error' defined
but not used [-Wunused-function]
373 | static void btintel_hw_error(struct hci_dev *hdev, u8 code)
| ^~~~~~~~~~~~~~~~
cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 67d4dbac3b ("Bluetooth: btintel: Export few static functions")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix compiler warnings reported by kernel bot.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405080647.VRBej6fA-lkp@intel.com/
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add initial code to support Intel bluetooth devices based on PCIe
transport. Allocate memory for TX & RX buffers, internal structures,
initialize interrupts for TX & RX and PCIe device.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some of the functions used in btintel.c is made global so that they can
be reused in other transport drivers apart from USB.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.
Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.
Fixes: e7b02296fb ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Return -ENOMEM on allocation failure. Don't return success.
Fixes: cda0d6a198 ("Bluetooth: qca: fix info leak when fetching fw build id")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).
Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.
So, use the `DEFINE_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
With these changes, fix the following warning:
net/bluetooth/hci_conn.c:669:41: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for BlazarI (cnvi) bluetooth core.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On our DUT, we can see that the host issues create connection cancel
command after 4-sec if there is no connection complete event for
LE create connection cmd.
As per core spec v5.3 section 7.8.5, advertisement interval range is-
Advertising_Interval_Min
Default : 0x0800(1.28s)
Time Range: 20ms to 10.24s
Advertising_Interval_Max
Default : 0x0800(1.28s)
Time Range: 20ms to 10.24s
If the remote device is using adv interval of > 4 sec, it is
difficult to make a connection with the current timeout value.
Also, with the default interval of 1.28 sec, we will get only
3 chances to capture the adv packets with the 4 sec window.
Hence we want to increase this timeout to 20sec.
Signed-off-by: Mahesh Talewad <mahesh.talewad@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The MediaTek MT7921S is a WiFi/Bluetooth combo chip that works over
SDIO. WiFi and Bluetooth are separate SDIO functions within the chip.
While the Bluetooth SDIO function is fully discoverable, the chip has
a pin that can reset just the Bluetooth core, as opposed to the full
chip. This should be described in the device tree.
Add a device tree binding for the Bluetooth SDIO function of the MT7921S
specifically to document the reset line. This binding is based on the MMC
controller binding, which specifies one device node per SDIO function.
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Previously LE flow credits were returned to the
sender even if the socket's receive buffer was
full. This meant that no back-pressure
was applied to the sender, thus it continued to
send data, resulting in data loss without any
error being reported. Furthermore, the amount
of credits was essentially fixed to a small
amount, leading to reduced performance.
This is fixed by computing the number of returned
LE flow credits based on the estimated available
space in the receive buffer of an L2CAP socket.
Consequently, if the receive buffer is full, no
credits are returned until the buffer is read and
thus cleared by user-space.
Since the computation of available receive buffer
space can only be performed approximately (due to
sk_buff overhead) and the receive buffer size may
be changed by user-space after flow credits have
been sent, superfluous received data is temporary
stored within l2cap_pinfo. This is necessary
because Bluetooth LE provides no retransmission
mechanism once the data has been acked by the
physical layer.
If receive buffer space estimation is not possible
at the moment, we fall back to providing credits
for one full packet as before. This is currently
the case during connection setup, when MPS is not
yet available.
Fixes: b1c325c23d ("Bluetooth: Implement returning of LE L2CAP credits")
Signed-off-by: Sebastian Urban <surban@surban.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
At the moment of the check, `cmd->num_cis` holds the value of 0x1f,
which is the max number of elements in the `cmd->cis[]` array at
declaration, which is 0x1f.
So, avoid using 0x1f directly, and instead use `cmd->num_cis`. Similarly
to this other patch[1].
Link: https://lore.kernel.org/linux-hardening/ZivaHUQyDDK9fXEk@neat/ [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use struct_size() instead of the open-coded version. Similarly to
this other patch[1].
Link: https://lore.kernel.org/linux-hardening/ZiwwPmCvU25YzWek@neat/ [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Clean up the QCA driver defines by dropping redundant parentheses around
values and making sure they are aligned (using tabs only).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Random module versions serves no purpose, what matters is the kernel
version.
Drop the bogus module version which has never been updated.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The skb->data pointer is never NULL so drop the bogus sanity checks when
initialising the EDL header pointer.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CYW43439 is a Wi-Fi + Bluetooth combo device from Infineon.
The Bluetooth part is capable of Bluetooth 5.2 BR/EDR/LE .
This chip is present e.g. on muRata 1YN module.
Extend the binding with its DT compatible using fallback
compatible string to "brcm,bcm4329-bt" which seems to be
the oldest compatible device. This should also prevent the
growth of compatible string tables in drivers. The existing
block of compatible strings is retained.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).
Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.
So, use the `DEFINE_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
With these changes, fix the following warning:
net/bluetooth/hci_conn.c:2116:50: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).
Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.
So, use the `DEFINE_FLEX()` helper for multiple on-stack definitions
of a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
Notice that, due to the use of `__counted_by()` in `struct
hci_cp_le_create_cis`, the for loop in function `hci_cs_le_create_cis()`
had to be modified. Once the index `i`, through which `cp->cis[i]` is
accessed, falls in the interval [0, cp->num_cis), `cp->num_cis` cannot
be decremented all the way down to zero while accessing `cp->cis[]`:
net/bluetooth/hci_event.c:4310:
4310 for (i = 0; cp->num_cis; cp->num_cis--, i++) {
...
4314 handle = __le16_to_cpu(cp->cis[i].cis_handle);
otherwise, only half (one iteration before `cp->num_cis == i`) or half
plus one (one iteration before `cp->num_cis < i`) of the items in the
array will be accessed before running into an out-of-bounds issue. So,
in order to avoid this, set `cp->num_cis` to zero just after the for
loop.
Also, make use of `aux_num_cis` variable to update `cmd->num_cis` after
a `list_for_each_entry_rcu()` loop.
With these changes, fix the following warnings:
net/bluetooth/hci_sync.c:1239:56: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1415:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1731:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:6497:45: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sort usb device id table for enhanced readability.
Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add HW IDs for wireless module specific to Acer/ASUS
notebook models to ensure proper recognition and functionality.
These HW IDs are extracted from Windows driver inf file.
Note some HW IDs without official drivers, still in testing phase.
Thus, we update module HW ID and test ensure consistent boot success.
Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Download board id specific NVM instead of default for WCN7850 if board id
is available.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The hardware information surfaced via debugfs might be usable by the
userspace to set some configuration knobs. This patch sets the hw_info
for Intel and Realtek chipsets.
Below are some possible output of the hardware_info debugfs file.
INTEL platform=55 variant=24
RTL lmp_subver=34898 hci_rev=10 hci_ver=11 hci_bus=1
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Macros HCI_REQ_DONE, HCI_REQ_PEND and HCI_REQ_CANCELED are repeatedly
defined twice with hci_request.h, so remove a copy of definition.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove a redundant check !hdev->get_codec_config_data.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
USB driver defines macro @USB_CTRL_SET_TIMEOUT for sending control message
timeout and @USB_CTRL_GET_TIMEOUT for receiving, but usb_control_msg()
uses wrong macro @USB_CTRL_SET_TIMEOUT as argument to receive control
message, fixed by using @USB_CTRL_GET_TIMEOUT to receive message.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Because both MT7920 and MT7921 use the same chip ID.
We use the 8th bit of fw_flavor to distingush MT7920.
The original patch made a mistake to check whole fw_flavor,
that makes the condition both true (dev_id == 0x7961 && fw_flavor),
and makes MT7921 flow wrong.
In this patch, we correct the flow to get the 8th bit value for MT7920.
And the patch is verified pass with both MT7920 and MT7921.
Signed-off-by: Peter Tsao <peter.tsao@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes some CHECKs reported by the checkpatch script.
Issues reported in ath3k.c:
-------
ath3k.c
-------
CHECK: Please don't use multiple blank lines
+
+
CHECK: Blank lines aren't necessary after an open brace '{'
+static const struct usb_device_id ath3k_blist_tbl[] = {
+
CHECK: Alignment should match open parenthesis
+static int ath3k_load_firmware(struct usb_device *udev,
+ const struct firmware *firmware)
CHECK: Alignment should match open parenthesis
+ err = usb_bulk_msg(udev, pipe, send_buf, size,
+ &len, 3000);
CHECK: Unnecessary parentheses around 'len != size'
+ if (err || (len != size)) {
CHECK: Alignment should match open parenthesis
+static int ath3k_get_version(struct usb_device *udev,
+ struct ath3k_version *version)
CHECK: Alignment should match open parenthesis
+static int ath3k_load_fwfile(struct usb_device *udev,
+ const struct firmware *firmware)
CHECK: Alignment should match open parenthesis
+ err = usb_bulk_msg(udev, pipe, send_buf, size,
+ &len, 3000);
CHECK: Unnecessary parentheses around 'len != size'
+ if (err || (len != size)) {
CHECK: Blank lines aren't necessary after an open brace '{'
+ switch (fw_version.ref_clock) {
+
CHECK: Alignment should match open parenthesis
+ snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+ le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
CHECK: Alignment should match open parenthesis
+static int ath3k_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
CHECK: Alignment should match open parenthesis
+ BT_ERR("Firmware file \"%s\" not found",
+ ATH3K_FIRMWARE);
CHECK: Alignment should match open parenthesis
+ BT_ERR("Firmware file \"%s\" request failed (err=%d)",
+ ATH3K_FIRMWARE, ret);
total: 0 errors, 0 warnings, 14 checks, 540 lines checked
Signed-off-by: Uri Arev <me@wantyapps.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Like the bcm43430a0 the bcm43455 BT does not support the 0xfc45 command
to set the UART clock to 48 MHz and because of this it does not work
at 4000000 baud.
These chips are found on ACPI/x86 devices where the operating baudrate
does not come from the firmware but is hardcoded at 4000000, which does
not work.
Make the driver_data for the "BCM2EA4" ACPI HID which is used for
the bcm43455 BT point to bcm43430_device_data which limits the baudrate
to 2000000.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
