The new route handling in ip_mc_finish_output() from 'net' overlapped
with the new support for returning congestion notifications from BPF
programs.
In order to handle this I had to take the dev_loopback_xmit() calls
out of the switch statement.
The aquantia driver conflicts were simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
There are common steps when releasing an accepted or unaccepted socket.
Move this code into a common routine.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If register_pernet_subsys success in smc_init,
we should cleanup it in case any other error.
Fixes: 64e28b52c7 (net/smc: add pnet table namespace support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After smc_lgr_create(), the newly created link group is added
to smc_lgr_list, thus is accessible from other context.
Although link group creation is serialized by
smc_create_lgr_pending, the new link group may still be accessed
concurrently. For example, if ib_device is no longer active,
smc_ib_port_event_work() will call smc_port_terminate(), which
in turn will call __smc_lgr_terminate() on every link group of
this device. So conns_lock is required here.
Signed-off-by: Huaping Zhou <zhp@smail.nju.edu.cn>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use in_dev_for_each_ifa_rcu/rtnl instead.
This prevents sparse warnings once proper __rcu annotations are added.
Signed-off-by: Florian Westphal <fw@strlen.de>
t di# Last commands done (6 commands done):
Signed-off-by: David S. Miller <davem@davemloft.net>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This has been a smaller cycle than normal. One new driver was accepted,
which is unusual, and at least one more driver remains in review on the
list.
- Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4, vmw_pvrdma
- Many patches from MatthewW converting radix tree and IDR users to use
xarray
- Introduction of tracepoints to the MAD layer
- Build large SGLs at the start for DMA mapping and get the driver to
split them
- Generally clean SGL handling code throughout the subsystem
- Support for restricting RDMA devices to net namespaces for containers
- Progress to remove object allocation boilerplate code from drivers
- Change in how the mlx5 driver shows representor ports linked to VFs
- mlx5 uapi feature to access the on chip SW ICM memory
- Add a new driver for 'EFA'. This is HW that supports user space packet
processing through QPs in Amazon's cloud
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlzTIU0ACgkQOG33FX4g
mxrGKQ/8CqpyvuCyZDW5ovO4DI4YlzYSPXehWlwxA4CWhU1AYTujutnNOdZdngnz
atTthOlJpZWJV26orvvzwIOi4qX/5UjLXEY3HYdn07JP1Z4iT7E3P4W2sdU3vdl3
j8bU7xM7ZWmnGxrBZ6yQlVRadEhB8+HJIZWMw+wx66cIPnvU+g9NgwouH67HEEQ3
PU8OCtGBwNNR508WPiZhjqMDfi/3BED4BfCihFhMbZEgFgObjRgtCV0M33SSXKcR
IO2FGNVuDAUBlND3vU9guW1+M77xE6p1GvzkIgdCp6qTc724NuO5F2ngrpHKRyZT
CxvBhAJI6tAZmjBVnmgVJex7rA8p+y/8M/2WD6GE3XSO89XVOkzNBiO2iTMeoxXr
+CX6VvP2BWwCArxsfKMgW3j0h/WVE9w8Ciej1628m1NvvKEV4AGIJC1g93lIJkRN
i3RkJ5PkIrdBrTEdKwDu1FdXQHaO7kGgKvwzJ7wBFhso8BRMrMfdULiMbaXs2Bw1
WdL5zoSe/bLUpPZxcT9IjXRxY5qR0FpIOoo6925OmvyYe/oZo1zbitS5GGbvV90g
tkq6Jb+aq8ZKtozwCo+oMcg9QPLYNibQsnkL3QirtURXWCG467xdgkaJLdF6s5Oh
cp+YBqbR/8HNMG/KQlCfnNQKp1ci8mG3EdthQPhvdcZ4jtbqnSI=
=TS64
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a smaller cycle than normal. One new driver was
accepted, which is unusual, and at least one more driver remains in
review on the list.
Summary:
- Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4,
vmw_pvrdma
- Many patches from MatthewW converting radix tree and IDR users to
use xarray
- Introduction of tracepoints to the MAD layer
- Build large SGLs at the start for DMA mapping and get the driver to
split them
- Generally clean SGL handling code throughout the subsystem
- Support for restricting RDMA devices to net namespaces for
containers
- Progress to remove object allocation boilerplate code from drivers
- Change in how the mlx5 driver shows representor ports linked to VFs
- mlx5 uapi feature to access the on chip SW ICM memory
- Add a new driver for 'EFA'. This is HW that supports user space
packet processing through QPs in Amazon's cloud"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits)
RDMA/ipoib: Allow user space differentiate between valid dev_port
IB/core, ipoib: Do not overreact to SM LID change event
RDMA/device: Don't fire uevent before device is fully initialized
lib/scatterlist: Remove leftover from sg_page_iter comment
RDMA/efa: Add driver to Kconfig/Makefile
RDMA/efa: Add the efa module
RDMA/efa: Add EFA verbs implementation
RDMA/efa: Add common command handlers
RDMA/efa: Implement functions that submit and complete admin commands
RDMA/efa: Add the ABI definitions
RDMA/efa: Add the com service API definitions
RDMA/efa: Add the efa_com.h file
RDMA/efa: Add the efa.h header file
RDMA/efa: Add EFA device definitions
RDMA: Add EFA related definitions
RDMA/umem: Remove hugetlb flag
RDMA/bnxt_re: Use core helpers to get aligned DMA address
RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size
RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks
RDMA/umem: Add API to find best driver supported page size in an MR
...
Use core provided API to fill the source MAC address and use
rdma_read_gid_attr_ndev_rcu() to get stable netdev.
This is preparation patch to allow gid attribute to become NULL when
associated net device is removed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add options to strictly validate messages and dump messages,
sometimes perhaps validating dump messages non-strictly may
be required, so add an option for that as well.
Since none of this can really be applied to existing commands,
set the options everwhere using the following spatch:
@@
identifier ops;
expression X;
@@
struct genl_ops ops[] = {
...,
{
.cmd = X,
+ .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
...
},
...
};
For new commands one should just not copy the .validate 'opt-out'
flags and thus get strict validation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework smc_conn_create() to always return a valid DECLINE reason code.
This removes the need to translate the return codes on 4 different
places and allows to easily add more detailed return codes by changing
smc_conn_create() only.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework smc_listen_work() to provide improved reason codes when an
SMC connection is declined. This allows better debugging on user side.
This also adds 3 more detailed reason codes in smc_clc.h to indicate
what type of device was not found (ism or rdma or both), or if ism
cannot talk to the peer.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In smc_listen_work() the variables rc and reason_code are defined which
have the same meaning. Eliminate reason_code in favor of the shorter
name rc. No functional changes.
Rename the functions smc_check_ism() and smc_check_rdma() into
smc_find_ism_device() and smc_find_rdma_device() to make there purpose
more clear. No functional changes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vlan_id of the underlying CLC socket was retrieved two times
during processing of the listen handshaking. Change this to get the
vlan id one time in connect and in listen processing, and reuse the id.
And add a new CLC DECLINE return code for the case when the retrieval
of the vlan id failed.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During initialization of an SMC socket a lot of function parameters need
to get passed down the function call path. Consolidate the parameters
in a helper struct so there are less enough parameters to get all passed
by register.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check for a matching ip prefix and subnet was only done for SMC-R
in smc_listen_rdma_check() but not when an SMC-D connection was
possible. Rename the function into smc_listen_prfx_check() and move its
call to a place where it is called for both SMC variants.
And add a new CLC DECLINE reason for the case when the IP prefix or
subnet check fails so the reason for the failing SMC connection can be
found out more easily.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the CLC decline reason codes for internal problems to not have
the sign bit set, negative reason codes are interpreted as not eligible
for TCP fallback.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For nonblocking sockets move the kernel_connect() from the connect
worker into the initial smc_connect part to return kernel_connect()
errors other than -EINPROGRESS to user space.
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit <26d92e951fe0>
("net/smc: move unhash as early as possible in smc_release()")
fixes one occurrence in the smc code, but the same pattern exists
in other places. This patch covers the remaining occurrences and
makes sure, the unhash operation is done before the smc->clcsock is
released. This avoids a potential use-after-free in smc_diag_dump().
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FLUSH command is used to empty the pnet table. No return code is
expected from the command. Commit a9d8b0b1e3d6 added namespace support
for the pnet table and changed the FLUSH command processing to call
smc_pnet_remove_by_pnetid() to remove the pnet entries. This function
returns -ENOENT when no entry was deleted, which is now the return code
of the FLUSH command. As a result the FLUSH command will return an error
when the pnet table is already empty.
Restore the expected behavior and let FLUSH always return 0.
Fixes: a9d8b0b1e3d6 ("net/smc: add pnet table namespace support")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fcntl(fd, F_SETOWN, getpid()) selects the recipient of SIGURG signals
that are delivered when out-of-band data arrives on socket fd.
If an SMC socket program makes use of such an fcntl() call, it fails
in case of fallback to TCP-mode. In case of fallback the traffic is
processed with the internal TCP socket. Propagating field "file" from the
SMC socket to the internal TCP socket fixes the issue.
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case alloc_ordered_workqueue fails, the fix returns NULL
to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the clcsock is already released using sock_release() and a pending
smc_listen_work accesses the clcsock than that will fail. Solve this
by canceling and waiting for the work to complete first. Because the
work holds the sock_lock it must make sure that the lock is not hold
before the new helper smc_clcsock_release() is invoked. And before the
smc_listen_work starts working check if the parent listen socket is
still valid, otherwise stop the work early.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since maxattr is common, the policy can't really differ sanely,
so make it common as well.
The only user that did in fact manage to make a non-common policy
is taskstats, which has to be really careful about it (since it's
still using a common maxattr!). This is no longer supported, but
we can fake it using pre_doit.
This reduces the size of e.g. nl80211.o (which has lots of commands):
text data bss dec hex filename
398745 14323 2240 415308 6564c net/wireless/nl80211.o (before)
397913 14331 2240 414484 65314 net/wireless/nl80211.o (after)
--------------------------------
-832 +8 0 -824
Which is obviously just 8 bytes for each command, and an added 8
bytes for the new policy pointer. I'm not sure why the ops list is
counted as .text though.
Most of the code transformations were done using the following spatch:
@ops@
identifier OPS;
expression POLICY;
@@
struct genl_ops OPS[] = {
...,
{
- .policy = POLICY,
},
...
};
@@
identifier ops.OPS;
expression ops.POLICY;
identifier fam;
expression M;
@@
struct genl_family fam = {
.ops = OPS,
.maxattr = M,
+ .policy = POLICY,
...
};
This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing
the cb->data as ops, which we want to change in a later genl patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull misc vfs updates from Al Viro:
"Assorted fixes (really no common topic here)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Make __vfs_write() static
vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1
pipe: stop using ->can_merge
splice: don't merge into linked buffers
fs: move generic stat response attr handling to vfs_getattr_nosec
orangefs: don't reinitialize result_mask in ->getattr
fs/devpts: always delete dcache dentry-s in dput()
Without hardware pnetid support there must currently be a pnet
table configured to determine the IB device port to be used for SMC
RDMA traffic. This patch enables a setup without pnet table, if
the used handshake interface belongs already to a RoCE port.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.
The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.
However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC-D devices are identified by their PCI IDs in the pnet table. In
order to make usage of the pnet table more consistent for users, this
patch adds this form of identification for ib devices as well.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds namespace support to the pnet table code. Each network
namespace gets its own pnet table. Infiniband and smcd device pnetids
can only be modified in the initial namespace. In other namespaces they
can still be used as if they were set by the underlying hardware.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, users can only set pnetids for netdevs and ib devices in the
pnet table. This patch adds support for smcd devices to the pnet table.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a device does not have a pnetid, users can set a temporary pnetid for
said device in the pnet table. This patch reworks the pnet table to make
it more flexible. Multiple entries with the same pnetid but differing
devices are now allowed. Additionally, the netlink interface now sends
each mapping from pnetid to device separately to the user while
maintaining the message format existing applications might expect. Also,
the SMC data structure for ib devices already has a pnetid attribute.
So, it is used to store the user defined pnetids. As a result, the pnet
table entries are only used for netdevs.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use local variable pflags from the beginning of function
smcr_tx_sndbuf_nonempty
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_poll() returns with mask bit EPOLLPRI if the connection urg_state
is SMC_URG_VALID. Since SMC_URG_VALID is zero, smc_poll signals
EPOLLPRI errorneously if called in state SMC_INIT before the connection
is created, for instance in a non-blocking connect scenario.
This patch switches to non-zero values for the urg states.
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Fixes: de8474eb9d ("net/smc: urgent data support")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netfilter conflicts were rather simple overlapping
changes.
However, the cls_tcindex.c stuff was a bit more complex.
On the 'net' side, Cong is fixing several races and memory
leaks. Whilst on the 'net-next' side we have Vlad adding
the rtnl-ness support.
What I've decided to do, in order to resolve this, is revert the
conversion over to using a workqueue that Cong did, bringing us back
to pure RCU. I did it this way because I believe that either Cong's
races don't apply with have Vlad did things, or Cong will have to
implement the race fix slightly differently.
Signed-off-by: David S. Miller <davem@davemloft.net>
For robustness protect of higher port numbers than expected to avoid
setting bits behind our port_event_mask. In case of an DEVICE_FATAL
event all ports must be checked. The IB_EVENT_GID_CHANGE event is
provided in the global event handler, so handle it there. And handle a
QP_FATAL event instead of an DEVICE_FATAL event in the qp handler.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the shortcut that smc_lgr_free() would skip the check for
existing connections when the link group is not in the link group list.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In smc_cdc_msg_recv_action() the received cdc message is evaluated.
To reduce the number of messaged triggered by this evaluation the logic
is streamlined. For the write_blocked condition we do not need to send
a response immediately. The remaining conditions can be put together
into one if clause.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When no free transfer buffers are available then a work to call
smc_tx_work() is scheduled. Set the schedule delay to zero, because for
the out-of-buffers condition the work can start immediately and will
block in the called function smc_wr_tx_get_free_slot(), waiting for free
buffers.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the call to smc_close_wake_tx_prepared() (which wakes up a possibly
waiting close processing that might wait for 'all data sent') to
smc_tx_sndbuf_nonempty() (which is the main function to send data).
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an updated rx_cursor_confirmed field was sent to the peer then
reset the cons_curs_upd_req flag. And remove the duplicate reset and
cursor update in smc_tx_consumer_update().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent change in the rx_curs_confirmed assignment disregards
byte order, which causes problems on little endian architectures.
This patch fixes it.
Fixes: b8649efad8 ("net/smc: fix sender_free computation") (net-tree)
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.
Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ed75986f4a ("net/smc: ipv6 support for smc_diag.c") changed the
value of the diag_family field. The idea was to indicate the family of
the IP address in the inet_diag_sockid field. But the change makes it
impossible to distinguish an inet_sock_diag response message from SMC
sock_diag response. This patch restores the original behaviour and sends
AF_SMC as value of the diag_family field.
Fixes: ed75986f4a ("net/smc: ipv6 support for smc_diag.c")
Reported-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The lgr field of an smc_connection is set in smc_conn_create() and
should be cleared in smc_conn_free() for consistency reasons, so move
the responsible code.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If SMC client and server connections are both established at the same
time, smc_connect_rdma() cannot send a CLC confirm message while
smc_listen_work() is waiting for one due to lock contention. This can
result in timeouts in smc_clc_wait_msg() and failed SMC connections.
In case of SMC-R, there are two types of LGRs (client and server LGRs)
which can be protected by separate locks. So, this patch splits the LGR
pending lock into two separate locks for client and server to avoid the
locking issue for SMC-R.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If SMC client and server connections are both established at the same
time, smc_connect_ism() cannot send a CLC confirm message while
smc_listen_work() is waiting for one due to lock contention. This can
result in timeouts in smc_clc_wait_msg() and failed SMC connections.
In case of SMC-D, the LGR pending lock is not needed while
smc_listen_work() is waiting for the CLC confirm message. So, this patch
releases the lock earlier for SMC-D to avoid the locking issue.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC already provides a wrapper for atomic64 calls to be
architecture independent. Use this wrapper for SMC-D as well.
Reported-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to RFC7609 (http://www.rfc-editor.org/info/rfc7609)
first the SMC-R connection is shut down and then the normal TCP
connection FIN processing drives cleanup of the internal TCP connection.
The unconditional release of the clcsock during active socket closing
has to be postponed if the peer has not yet signalled socket closing.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If some kind of closing is received from the peer while still in
state SMC_INIT, it means the peer has had an active connection and
closed the socket quickly before listen_work finished. This should
not result in a shortcut from state SMC_INIT to state SMC_CLOSED.
This patch adds the socket to the accept queue in state
SMC_APPCLOSEWAIT1. The socket reaches state SMC_CLOSED once being
accepted and closed with smc_release().
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
