The power_pmu_event_init() callback access per-cpu variable
(cpu_hw_events) to check for event constraints and Branch Stack
(BHRB). Current usage is to disable preemption when accessing the
per-cpu variable, but this does not prevent timer callback from
interrupting event_init. Fix this by using 'local_irq_save/restore'
to make sure the code path is invoked with disabled interrupts.
This change is tested in mambo simulator to ensure that, if a timer
interrupt comes in during the per-cpu access in event_init, it will be
soft masked and replayed later. For testing purpose, introduced a
udelay() in power_pmu_event_init() to make sure a timer interrupt arrives
while in per-cpu variable access code between local_irq_save/resore.
As expected the timer interrupt was replayed later during local_irq_restore
called from power_pmu_event_init. This was confirmed by adding
breakpoint in mambo and checking the backtrace when timer_interrupt
was hit.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1606814880-1720-1-git-send-email-atrajeev@linux.vnet.ibm.com
In a bunch of our security flushes, we use a comma rather than
a semicolon to 'terminate' an assignment. Nothing breaks, but
checkpatch picks it up if you copy it into another flush.
Switch to semicolons for ending statements.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201201144344.1228421-1-dja@axtens.net
This enables GENERIC_BUG_RELATIVE_POINTERS on Power so that 32-bit
offsets are stored in the bug entries rather than 64-bit pointers.
While this doesn't save space for 32-bit machines, use it anyway so
there is only one code path.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201201005203.15210-1-jniethe5@gmail.com
With CONFIG_PPC_8xx and CONFIG_XMON set, kernel build fails with
arch/powerpc/xmon/xmon.c:1379:12: error: 'find_free_data_bpt' defined
but not used [-Werror=unused-function]
Fix it by enclosing find_free_data_bpt() inside #ifndef CONFIG_PPC_8xx.
Fixes: 30df74d67d ("powerpc/watchpoint/xmon: Support 2nd DAWR")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201130034406.288047-1-ravi.bangoria@linux.ibm.com
Commit 63ce271b5e ("powerpc/prom: convert PROM_BUG() to standard
trap") added an EMIT_BUG_ENTRY for the trap after the branch to
start_kernel(). The EMIT_BUG_ENTRY was for the address "0b", however the
trap was not labeled with "0". Hence the address used for bug is in
relative_toc() where the previous "0" label is. Label the trap as "0" so
the correct address is used.
Fixes: 63ce271b5e ("powerpc/prom: convert PROM_BUG() to standard trap")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201130004404.30953-1-jniethe5@gmail.com
__kernel_sync_dicache_p5() is an alternative to
__kernel_sync_dicache() when cpu has CPU_FTR_COHERENT_ICACHE
Remove this alternative function and merge
__kernel_sync_dicache_p5() into __kernel_sync_dicache() using
standard CPU feature fixup.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4c7dcc6544882761b2b0249d7a8ec2c3a8088cb5.1601197618.git.christophe.leroy@csgroup.eu
This is copied from arm64.
Instead of using runtime generated signal trampoline offsets,
get offsets at buildtime.
If the said trampoline doesn't exist, build will fail. So no
need to check whether the trampoline exists or not in the VDSO.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f8bfd6812c3e3678b1cdb4d55a52f9eb022b40d3.1601197618.git.christophe.leroy@csgroup.eu
All other architectures but s390 use a void pointer named 'vdso'
to reference the VDSO mapping.
In a following patch, the VDSO data page will be put in front of
text, vdso_base will then not anymore point to VDSO text.
To avoid confusion between vdso_base and VDSO text, rename vdso_base
into vdso and make it a void __user *.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8e6cefe474aa4ceba028abb729485cd46c140990.1601197618.git.christophe.leroy@csgroup.eu
Copied from commit 2fea7f6c98 ("arm64: vdso: move to
_install_special_mapping and remove arch_vma_name").
Use the new _install_special_mapping() API added by
commit a62c34bd2a ("x86, mm: Improve _install_special_mapping
and fix x86 vdso naming") which obsolete install_special_mapping().
And remove arch_vma_name() as the name is handled by the new API.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: kernel test robot <lkp@intel.com>
[mpe: Squash fix to use PTR_ERR_OR_ZERO() from lkp]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e7e5dfe0f93234e31051f2a610b4b07f50b0082f.1601197618.git.christophe.leroy@csgroup.eu
Today vdso_data structure has:
- syscall_map_32[] and syscall_map_64[] on PPC64
- syscall_map_32[] on PPC32
On PPC32, syscall_map_32[] is populated using sys_call_table[].
On PPC64, syscall_map_64[] is populated using sys_call_table[]
and syscal_map_32[] is populated using compat_sys_call_table[].
To simplify vdso_setup_syscall_map(),
- On PPC32 rename syscall_map_32[] into syscall_map[],
- On PPC64 rename syscall_map_64[] into syscall_map[],
- On PPC64 rename syscall_map_32[] into compat_syscall_map[].
That way, syscall_map[] gets populated using sys_call_table[] and
compat_syscall_map[] gets population using compat_sys_call_table[].
Also define an empty compat_syscall_map[] on PPC32 to avoid ifdefs.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/472734be0d9991eee320a06824219a5b2663736b.1601197618.git.christophe.leroy@csgroup.eu
Instead of including extern references locally in
vdso_setup_syscall_map(), add the missing headers.
sys_ni_syscall() being a function, cast its address to
an unsigned long instead of declaring it as a fake
unsigned long object.
At the same time, remove a comment which paraphrases the
function name.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b4afedce748ed2858299ceab5ae29b52109263ef.1601197618.git.christophe.leroy@csgroup.eu
Since commit 24b659a138 ("powerpc: Use unstripped VDSO image for
more accurate profiling data"), only the unstripped VDSO image
has been used.
Partially revert commit 8150caad02 ("[POWERPC] powerpc vDSO: install
unstripped copies on disk") to avoid building the stripped version.
And the unstripped version in $(MODLIB)/vdso/ is not required
anymore as it is the one embedded in the kernel image.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5986ca25be44fe6e9790486304507f240077d8c4.1601197618.git.christophe.leroy@csgroup.eu
Change those two functions to be used within a user access block.
For that, change save_general_regs() to and unsafe_save_general_regs(),
then replace all user accesses by unsafe_ versions.
This series leads to a reduction from 2.55s to 1.73s of
the system CPU time with the following microbench app
on an mpc832x with KUAP (approx 32%)
Without KUAP, the difference is in the noise.
void sigusr1(int sig) { }
int main(int argc, char **argv)
{
int i = 100000;
signal(SIGUSR1, sigusr1);
for (;i--;)
raise(SIGUSR1);
exit(0);
}
An additional 0.10s reduction is achieved by removing
CONFIG_PPC_FPU, as the mpc832x has no FPU.
A bit less spectacular on an 8xx as KUAP is less heavy, prior to
the series (with KUAP) it ran in 8.10 ms. Once applies the removal
of FPU regs handling, we get 7.05s. With the full series, we get 6.9s.
If artificially re-activating FPU regs handling with the full series,
we get 7.6s.
So for the 8xx, the removal of the FPU regs copy is what makes the
difference, but the rework of handle_signal also have a benefit.
Same as above, without KUAP the difference is in the noise.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fixup typo in SPE handling]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c7b37b385ccf9666066452e58f018a86573f83e8.1597770847.git.christophe.leroy@csgroup.eu
Reorder actions in save_user_regs() and save_tm_user_regs() to
regroup copies together in order to switch to user_access_begin()
logic in a later patch.
Move non-copy actions into new functions called
prepare_save_user_regs() and prepare_save_tm_user_regs().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f6eac65781b4a57220477c8864bca2b57f29a5d5.1597770847.git.christophe.leroy@csgroup.eu
put_sigset_t() calls copy_to_user() for copying two words.
This is terribly inefficient for copying two words.
By switching to unsafe_put_user(), we end up with something as
simple as:
3cc: 81 3d 00 00 lwz r9,0(r29)
3d0: 91 26 00 b4 stw r9,180(r6)
3d4: 81 3d 00 04 lwz r9,4(r29)
3d8: 91 26 00 b8 stw r9,184(r6)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/06def97e87ac1c4ae8e3197e0982e1fab7b3c8ae.1597770847.git.christophe.leroy@csgroup.eu
On the same way as handle_signal32(), replace all user
accesses with equivalent unsafe_ versions, and move the
trampoline code icache flush outside the user access block.
Functions that have no unsafe_ equivalent also remains outside
the access block.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2974314226256f958e2984912b48883ef1754185.1597770847.git.christophe.leroy@csgroup.eu
Those two functions are similar and serving the same purpose.
To ease refactorisation, move them close to each other.
This is pure move, no code change, no cosmetic. Yes, checkpatch is
not happy, most will clear later.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dbce67900bf566bcf40179467bf1eb500814c405.1597770847.git.christophe.leroy@csgroup.eu
If something is bad in the frame, there is no point in
knowing which part of the frame exactly is wrong as it
got allocated as a single block.
Always print the root address of the frame in case of
failed user access, just like handle_signal32().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/691895bd31fee89a2d8370befd66ad4eff5b63f2.1597770847.git.christophe.leroy@csgroup.eu
Instead of calling get_tm_stackpointer() from the caller, call it
directly from get_sigframe(). This avoids a double call and
allows get_tm_stackpointer() to become static and be inlined
into get_sigframe() by GCC.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/abfdc105b8b28c4eb3ab9a26297d17f302b600ea.1597770847.git.christophe.leroy@csgroup.eu
get_clean_sp() is only used once in kernel/signal.c .
GCC is smart enough to see that x & 0xffffffff is a nop
calculation on PPC32, no need of a special PPC32 trivial version.
Include the logic from the PPC64 version of get_clean_sp() directly
in get_sigframe().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/13ef6510ce30a4867e043157b93af5bb8c67fb3b.1597770847.git.christophe.leroy@csgroup.eu
There is no point in copying floating point regs when there
is no FPU and MATH_EMULATION is not selected.
Create a new CONFIG_PPC_FPU_REGS bool that is selected by
CONFIG_MATH_EMULATION and CONFIG_PPC_FPU, and use it to
opt out everything related to fp_state in thread_struct.
The asm const used only by fpu.S are opted out with CONFIG_PPC_FPU
as fpu.S build is conditionnal to CONFIG_PPC_FPU.
The following app spends approx 8.1 seconds system time on an 8xx
without the patch, and 7.0 seconds with the patch (13.5% reduction).
On an 832x, it spends approx 2.6 seconds system time without
the patch and 2.1 seconds with the patch (19% reduction).
void sigusr1(int sig) { }
int main(int argc, char **argv)
{
int i = 100000;
signal(SIGUSR1, sigusr1);
for (;i--;)
raise(SIGUSR1);
exit(0);
}
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7569070083e6cd5b279bb5023da601aba3c06f3c.1597770847.git.christophe.leroy@csgroup.eu
Today we have:
#ifdef CONFIG_PPC32
index = addr >> 2;
if ((addr & 3) || child->thread.regs == NULL)
#else
index = addr >> 3;
if ((addr & 7))
#endif
sizeof(long) has value 4 for PPC32 and value 8 for PPC64.
Dividing by 4 is equivalent to >> 2 and dividing by 8 is equivalent
to >> 3.
And 3 and 7 are respectively (sizeof(long) - 1).
Use sizeof(long) to get rid of the #ifdef CONFIG_PPC32 and consolidate
the calculation and checking.
thread.regs have to be not NULL on both PPC32 and PPC64 so adding
that test on PPC64 is harmless.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3cd1e284e93c60db981659585e18d1f6bb73ed2f.1597770847.git.christophe.leroy@csgroup.eu
To really be inlined, the functions need to be defined in the
same C file as the caller, or in an included header.
Move functions defined inline from signal .c in signal.h
Fixes: 3dd4eb83a9 ("powerpc: move common register copy functions from signal_32.c to signal.c")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/35b1bd44a1a66f5bcf9b457a1c480ac8d5ef50b2.1597770847.git.christophe.leroy@csgroup.eu
Provides __kernel_clock_gettime64() on vdso32. This is the
64 bits version of __kernel_clock_gettime() which is
y2038 compliant.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-9-mpe@ellerman.id.au
On PPC64, the TOC pointer needs to be saved and restored.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-7-mpe@ellerman.id.au
Prepare for switching VDSO to generic C implementation in following
patch. Here, we:
- Prepare the helpers to call the C VDSO functions
- Prepare the required callbacks for the C VDSO functions
- Prepare the clocksource.h files to define VDSO_ARCH_CLOCKMODES
- Add the C trampolines to the generic C VDSO functions
powerpc is a bit special for VDSO as well as system calls in the
way that it requires setting CR SO bit which cannot be done in C.
Therefore, entry/exit needs to be performed in ASM.
Implementing __arch_get_vdso_data() would clobber the link register,
requiring the caller to save it. As the ASM calling function already
has to set a stack frame and saves the link register before calling
the C vdso function, retriving the vdso data pointer there is lighter.
Implement __arch_vdso_capable() and always return true.
Provide vdso_shift_ns(), as the generic x >> s gives the following
bad result:
18: 35 25 ff e0 addic. r9,r5,-32
1c: 41 80 00 10 blt 2c <shift+0x14>
20: 7c 64 4c 30 srw r4,r3,r9
24: 38 60 00 00 li r3,0
...
2c: 54 69 08 3c rlwinm r9,r3,1,0,30
30: 21 45 00 1f subfic r10,r5,31
34: 7c 84 2c 30 srw r4,r4,r5
38: 7d 29 50 30 slw r9,r9,r10
3c: 7c 63 2c 30 srw r3,r3,r5
40: 7d 24 23 78 or r4,r9,r4
In our case the shift is always <= 32. In addition, the upper 32 bits
of the result are likely nul. Lets GCC know it, it also optimises the
following calculations.
With the patch, we get:
0: 21 25 00 20 subfic r9,r5,32
4: 7c 69 48 30 slw r9,r3,r9
8: 7c 84 2c 30 srw r4,r4,r5
c: 7d 24 23 78 or r4,r9,r4
10: 7c 63 2c 30 srw r3,r3,r5
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-6-mpe@ellerman.id.au
Currently we use ifdef __powerpc64__ in barrier.h to decide if we
should use lwsync or eieio for SMPWMB which is then used by
__smp_wmb().
That means when we are building the compat VDSO we will use eieio,
because it's 32-bit code, even though we're building a 64-bit kernel
for a 64-bit CPU.
Although eieio should work, it would be cleaner if we always used the
same barrier, even for the 32-bit VDSO.
So change the ifdef to CONFIG_PPC64, so that the selection is made
based on the bitness of the kernel we're building for, not the current
compilation unit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-5-mpe@ellerman.id.au
When we're building the compat VDSO we are building 32-bit code but in
the context of a 64-bit kernel configuration.
To make this work we need to be careful in some places when using
ifdefs to differentiate between CONFIG_PPC64 and __powerpc64__.
CONFIG_PPC64 indicates the kernel we're building is 64-bit, but it
doesn't tell us that we're currently building 64-bit code - we could
be building 32-bit code for the compat VDSO.
On the other hand __powerpc64__ tells us that we are currently
building 64-bit code (and therefore we must also be building a 64-bit
kernel).
In the case of get_tb() we want to use the 32-bit code sequence
regardless of whether the kernel we're building for is 64-bit or
32-bit, what matters is the word size of the current object. So we
need to check __powerpc64__ to decide if we use mftb() or the
mftbu()/mftb() sequence.
For mftb() the logic for CPU_FTR_CELL_TB_BUG only makes sense if we're
building 64-bit code, so guard that with a __powerpc64__ check.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-4-mpe@ellerman.id.au
In order to easily use get_tb() from C VDSO, move timebase
functions into a new header named asm/vdso/timebase.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-3-mpe@ellerman.id.au
cpu_relax() need to be in asm/vdso/processor.h to be used by
the C VDSO generic library.
Move it there.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-2-mpe@ellerman.id.au
In order to build VDSO32 for PPC64, we need to have CPU_FTRS_POSSIBLE
and CPU_FTRS_ALWAYS independant of whether we are building the
32 bits VDSO or the 64 bits VDSO.
Use #ifdef CONFIG_PPC64 instead of #ifdef __powerpc64__
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-1-mpe@ellerman.id.au
Update the NUMA Kconfig description to match other architectures, and
add some help text. Shamelessly borrowed from x86/arm64.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201124120547.1940635-3-mpe@ellerman.id.au
Our NUMA option is default y for pseries, but not powernv. The bulk of
powernv systems are NUMA, so make NUMA default y for powernv also.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20201124120547.1940635-2-mpe@ellerman.id.au
Our Kconfig allows NUMA to be enabled without SMP, but none of
our defconfigs use that combination. This means it can easily be
broken inadvertently by code changes, which has happened recently.
Although it's theoretically possible to have a machine with a single
CPU and multiple memory nodes, I can't think of any real systems where
that's the case. Even so if such a system exists, it can just run an
SMP kernel anyway.
So to avoid the need to add extra #ifdefs and/or build breaks, make
NUMA depend on SMP.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201124120547.1940635-1-mpe@ellerman.id.au
On systems without any specific PMU driver support registered, running
'perf record' with —intr-regs will crash ( perf record -I <workload> ).
The relevant portion from crash logs and Call Trace:
Unable to handle kernel paging request for data at address 0x00000068
Faulting instruction address: 0xc00000000013eb18
Oops: Kernel access of bad area, sig: 11 [#1]
CPU: 2 PID: 13435 Comm: kill Kdump: loaded Not tainted 4.18.0-193.el8.ppc64le #1
NIP: c00000000013eb18 LR: c000000000139f2c CTR: c000000000393d80
REGS: c0000004a07ab4f0 TRAP: 0300 Not tainted (4.18.0-193.el8.ppc64le)
NIP [c00000000013eb18] is_sier_available+0x18/0x30
LR [c000000000139f2c] perf_reg_value+0x6c/0xb0
Call Trace:
[c0000004a07ab770] [c0000004a07ab7c8] 0xc0000004a07ab7c8 (unreliable)
[c0000004a07ab7a0] [c0000000003aa77c] perf_output_sample+0x60c/0xac0
[c0000004a07ab840] [c0000000003ab3f0] perf_event_output_forward+0x70/0xb0
[c0000004a07ab8c0] [c00000000039e208] __perf_event_overflow+0x88/0x1a0
[c0000004a07ab910] [c00000000039e42c] perf_swevent_hrtimer+0x10c/0x1d0
[c0000004a07abc50] [c000000000228b9c] __hrtimer_run_queues+0x17c/0x480
[c0000004a07abcf0] [c00000000022aaf4] hrtimer_interrupt+0x144/0x520
[c0000004a07abdd0] [c00000000002a864] timer_interrupt+0x104/0x2f0
[c0000004a07abe30] [c0000000000091c4] decrementer_common+0x114/0x120
When perf record session is started with "-I" option, capturing registers
on each sample calls is_sier_available() to check for the
SIER (Sample Instruction Event Register) availability in the platform.
This function in core-book3s accesses 'ppmu->flags'. If a platform specific
PMU driver is not registered, ppmu is set to NULL and accessing its
members results in a crash. Fix the crash by returning false in
is_sier_available() if ppmu is not set.
Fixes: 333804dc3b ("powerpc/perf: Update perf_regs structure to include SIER")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1606185640-1720-1-git-send-email-atrajeev@linux.vnet.ibm.com
Use bcl 20,31,0f rather than plain bl to avoid unbalancing the link
stack.
Update the code to use REL16 relocs, available for ppc64 in 2009 (and
ppc32 in 2005).
Signed-off-by: Alan Modra <amodra@gmail.com>
[mpe: Incorporate more detail into the change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The clang toolchain treats inline assembly a bit differently than
straight assembly code. In particular, inline assembly doesn't have
the complete context available to resolve expressions. This is
intentional to avoid divergence in the resulting assembly code.
We can work around this issue by borrowing a workaround done for ARM,
i.e. not directly testing the labels themselves, but by moving the
current output pointer by a value that should always be zero. If this
value is not null, then we will trigger a backward move, which is
explicitly forbidden.
Signed-off-by: Bill Wendling <morbo@google.com>
[mpe: Put it in a macro and only do the workaround for clang]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201120224034.191382-4-morbo@google.com
The "-z notext" flag disables reporting an error if DT_TEXTREL is set.
ld.lld: error: can't create dynamic relocation R_PPC64_ADDR64 against
symbol: _start in readonly segment; recompile object files with
-fPIC or pass '-Wl,-z,notext' to allow text relocations in the
output
>>> defined in
>>> referenced by crt0.o:(.text+0x8) in archive arch/powerpc/boot/wrapper.a
The BFD linker disables this by default (though it's configurable in
current versions). LLD enables this by default. So we add the flag to
keep LLD from emitting the error.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201120224034.191382-2-morbo@google.com
Normally all read-only sections precede SHF_WRITE sections. .dynamic
and .got have the SHF_WRITE flag; .dynamic probably because of
DT_DEBUG. LLD emits an error when this happens, so use "-z rodynamic"
to mark .dynamic as read-only.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201118223910.2711337-1-morbo@google.com
Both .dynamic and .got are RELRO sections and should be placed
together, and LLD emits an error:
ld.lld: error: section: .got is not contiguous with other relro sections
Place them together to avoid this.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201017000151.150788-1-morbo@google.com
The commit a8a4b03ab9 ("powerpc: Hard wire PT_SOFTE value to 1 in
ptrace & signals") changed ptrace_get_reg(PT_SOFTE) to report 0x1,
but PTRACE_GETREGS still copies pt_regs->softe as is.
This is not consistent and this breaks the user-regs-peekpoke test
from https://sourceware.org/systemtap/wiki/utrace/tests/
Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201119160247.GB5188@redhat.com
gpr_get() does membuf_write() twice to override pt_regs->msr in
between. We can call membuf_write() once and change ->msr in the
kernel buffer, this simplifies the code and the next fix.
The patch adds a new simple helper, membuf_at(offs), it returns the
new membuf which can be safely used after membuf_write().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[mpe: Fixup some minor whitespace issues noticed by Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201119160221.GA5188@redhat.com
Using DECLARE_STATIC_KEY_FALSE needs linux/jump_table.h.
Otherwise the build fails with eg:
arch/powerpc/include/asm/book3s/64/kup-radix.h:66:1: warning: data definition has no type or storage class
66 | DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
Fixes: 9a32a7e78b ("powerpc/64s: flush L1D after user accesses")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201123184016.693fe464@canb.auug.org.au
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and after the
kernel performs any user accesses (patch 3). It also adds a self-test and
performs some related cleanups.
-----BEGIN PGP SIGNATURE-----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=Yibq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-cve-2020-4788' into fixes
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and after the
kernel performs any user accesses (patch 3). It also adds a self-test and
performs some related cleanups.
pseries|pnv_setup_rfi_flush already does the count cache flush setup, and
we just added entry and uaccess flushes. So the name is not very accurate
any more. In both platforms we then also immediately setup the STF flush.
Rename them to _setup_security_mitigations and fold the STF flush in.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In kup.h we currently include kup-radix.h for all 64-bit builds, which
includes Book3S and Book3E. The latter doesn't make sense, Book3E
never uses the Radix MMU.
This has worked up until now, but almost by accident, and the recent
uaccess flush changes introduced a build breakage on Book3E because of
the bad structure of the code.
So disentangle things so that we only use kup-radix.h for Book3S. This
requires some more stubs in kup.h and fixing an include in
syscall_64.c.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Let's use alloc_contig_pages() for allocating memory and remove the
linear mapping manually via arch_remove_linear_mapping(). Mark all pages
PG_offline, such that they will definitely not get touched - e.g.,
when hibernating. When freeing memory, try to revert what we did.
The original idea was discussed in:
https://lkml.kernel.org/r/48340e96-7e6b-736f-9e23-d3111b915b6e@redhat.com
This is similar to CONFIG_DEBUG_PAGEALLOC handling on other
architectures, whereby only single pages are unmapped from the linear
mapping. Let's mimic what memory hot(un)plug would do with the linear
mapping.
We now need MEMORY_HOTPLUG and CONTIG_ALLOC as dependencies. Add a TODO
that we want to use __GFP_ZERO for clearing once alloc_contig_pages()
understands that.
Tested with in QEMU/TCG with 10 GiB of main memory:
[root@localhost ~]# echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 105.903043][ T1080] memtrace: Allocated trace memory on node 0 at 0x0000000080000000
[root@localhost ~]# echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 145.042493][ T1080] radix-mmu: Mapped 0x0000000080000000-0x00000000c0000000 with 64.0 KiB pages
[ 145.049019][ T1080] memtrace: Freed trace memory back on node 0
[ 145.333960][ T1080] memtrace: Allocated trace memory on node 0 at 0x0000000080000000
[root@localhost ~]# echo 0x80000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 213.606916][ T1080] radix-mmu: Mapped 0x0000000080000000-0x00000000c0000000 with 64.0 KiB pages
[ 213.613855][ T1080] memtrace: Freed trace memory back on node 0
[ 214.185094][ T1080] memtrace: Allocated trace memory on node 0 at 0x0000000080000000
[root@localhost ~]# echo 0x100000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 234.874872][ T1080] radix-mmu: Mapped 0x0000000080000000-0x0000000100000000 with 64.0 KiB pages
[ 234.886974][ T1080] memtrace: Freed trace memory back on node 0
[ 234.890153][ T1080] memtrace: Failed to allocate trace memory on node 0
[root@localhost ~]# echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 259.490196][ T1080] memtrace: Allocated trace memory on node 0 at 0x0000000080000000
I also made sure allocated memory is properly zeroed.
Note 1: We currently won't be allocating from ZONE_MOVABLE - because our
pages are not movable. However, as we don't run with any memory
hot(un)plug mechanism around, we could make an exception to
increase the chance of allocations succeeding.
Note 2: PG_reserved isn't sufficient. E.g., kernel_page_present() used
along PG_reserved in hibernation code will always return "true"
on powerpc, resulting in the pages getting touched. It's too
generic - e.g., indicates boot allocations.
Note 3: For now, we keep using memory_block_size_bytes() as minimum
granularity.
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-9-david@redhat.com
Let's revert what we did in case something goes wrong and we return an
error - as already done on arm64 and s390x.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-8-david@redhat.com
The single caller (arch_remove_linear_mapping()) prints a proper
warning when this function fails. No need to eventually crash the
kernel - let's drop this WARN_ON.
Suggested-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-7-david@redhat.com
Let's print a warning similar to in arch_add_linear_mapping() instead of
WARN_ON_ONCE() and eventually crashing the kernel.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-6-david@redhat.com
This code currently relies on mem_hotplug_begin()/mem_hotplug_done() -
create_section_mapping()/remove_section_mapping() implementations
cannot tollerate getting called concurrently.
Let's prepare for callers (memtrace) not holding any such locks (and
don't force them to mess with memory hotplug locks).
Other parts in these functions don't seem to rely on external locking.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-5-david@redhat.com
We want to stop abusing memory hotplug infrastructure in memtrace code
to perform allocations and remove the linear mapping. Instead we will use
alloc_contig_pages() and remove the linear mapping manually.
Let's factor out creating/removing the linear mapping into
arch_create_linear_mapping() / arch_remove_linear_mapping() - so in the
future, we might be able to have whole arch_add_memory() /
arch_remove_memory() be implemented in common code.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-4-david@redhat.com
It's very easy to crash the kernel right now by simply trying to
enable memtrace concurrently, hammering on the "enable" interface
loop.sh:
#!/bin/bash
dmesg --console-off
while true; do
echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
done
[root@localhost ~]# loop.sh &
[root@localhost ~]# loop.sh &
Resulting quickly in a kernel crash. Let's properly protect using a
mutex.
Fixes: 9d5171a8f2 ("powerpc/powernv: Enable removal of memory for in memory tracing")
Cc: stable@vger.kernel.org# v4.14+
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-3-david@redhat.com
In power10 DD1, there is an issue where the SIAR (Sampled Instruction
Address Register) is not latching to the sampled address during random
sampling. This results in value of 0s in the SIAR. Add a check to use
regs->nip when SIAR is zero.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201021085329.384535-5-maddy@linux.ibm.com
