mirror of
https://github.com/torvalds/linux.git
synced 2024-12-01 00:21:32 +00:00
dd21bfa425
293 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dāvis Mosāns
|
2e7be9db12 |
btrfs: send: in case of IO error log it
Currently if we get IO error while doing send then we abort without logging information about which file caused issue. So log it to help with debugging. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Dāvis Mosāns <davispuh@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Filipe Manana
|
d96b34248c |
btrfs: make send work with concurrent block group relocation
We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit |
||
Omar Sandoval
|
b1dea4e732 |
btrfs: send: remove unused type parameter to iterate_inode_ref_t
Again, I don't think this was ever used since iterate_dir_item() is only used for xattrs. No functional change. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Omar Sandoval
|
eab67c0645 |
btrfs: send: remove unused found_type parameter to lookup_dir_item_inode()
As far as I can tell, this was never used. No functional change. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Josef Bacik
|
3212fa14e7 |
btrfs: drop the _nr from the item helpers
Now that all call sites are using the slot number to modify item values, rename the SETGET helpers to raw_item_*(), and then rework the _nr() helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then rename all of the callers to the new helpers. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
227f3cd0d5 |
btrfs: use btrfs_item_size_nr/btrfs_item_offset_nr everywhere
We have this pattern in a lot of places item = btrfs_item_nr(slot); btrfs_item_size(leaf, item); when we could simply use btrfs_item_size(leaf, slot); Fix all callers of btrfs_item_size() and btrfs_item_offset() to use the _nr variation of the helpers. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
David Sterba
|
e77fbf9903 |
btrfs: send: prepare for v2 protocol
This is preparatory work for send protocol update to version 2 and higher. We have many pending protocol update requests but still don't have the basic protocol rev in place, the first thing that must happen is to do the actual versioning support. The protocol version is u32 and is a new member in the send ioctl struct. Validity of the version field is backed by a new flag bit. Old kernels would fail when a higher version is requested. Version protocol 0 will pick the highest supported version, BTRFS_SEND_STREAM_VERSION, that's also exported in sysfs. The version is still unchanged and will be increased once we have new incompatible commands or stream updates. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Marcos Paulo de Souza
|
0e3dd5bce8 |
btrfs: send: simplify send_create_inode_if_needed
The out label is being overused, we can simply return if the condition permits. No functional changes. Reviewed-by: Su Yue <l@damenly.su> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Goldwyn Rodrigues
|
dce2815039 |
btrfs: allocate backref_ctx on stack in find_extent_clone
Instead of using kmalloc() to allocate backref_ctx, allocate backref_ctx on stack. The size is reasonably small. sizeof(backref_ctx) = 48 Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
214cc18432 |
btrfs: constify and cleanup variables in comparators
Comparators just read the data and thus get const parameters. This should be also preserved by the local variables, update all comparators passed to sort or bsearch. Cleanups: - unnecessary casts are dropped - btrfs_cmp_device_free_bytes is cleaned up to follow the common pattern and 'inline' is dropped as the function address is taken Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
35b22c19af |
btrfs: send: fix crash when memory allocations trigger reclaim
When doing a send we don't expect the task to ever start a transaction after the initial check that verifies if commit roots match the regular roots. This is because after that we set current->journal_info with a stub (special value) that signals we are in send context, so that we take a read lock on an extent buffer when reading it from disk and verifying it is valid (its generation matches the generation stored in the parent). This stub was introduced in 2014 by commit |
||
|
Filipe Manana
|
1cea5cf0e6 |
btrfs: ensure relocation never runs while we have send operations running
Relocation and send do not play well together because while send is running a block group can be relocated, a transaction committed and the respective disk extents get re-allocated and written to or discarded while send is about to do something with the extents. This was explained in commit |
||
|
David Sterba
|
1a9fd4172d |
btrfs: fix typos in comments
Fix typos that have snuck in since the last round. Found by codespell. Signed-off-by: David Sterba <dsterba@suse.com> |
||
Baokun Li
|
bb930007c0 |
btrfs: send: use list_move_tail instead of list_del/list_add_tail
Use list_move_tail() instead of list_del() + list_add_tail() as it's doing the same thing and allows further cleanups. Open code name_cache_used() as there is only one user. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
d8ac76cdd1 |
btrfs: send: fix invalid path for unlink operations after parent orphanization
During an incremental send operation, when processing the new references
for the current inode, we might send an unlink operation for another inode
that has a conflicting path and has more than one hard link. However this
path was computed and cached before we processed previous new references
for the current inode. We may have orphanized a directory of that path
while processing a previous new reference, in which case the path will
be invalid and cause the receiver process to fail.
The following reproducer triggers the problem and explains how/why it
happens in its comments:
$ cat test-send-unlink.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# Create our test files and directory. Inode 259 (file3) has two hard
# links.
touch $MNT/file1
touch $MNT/file2
touch $MNT/file3
mkdir $MNT/A
ln $MNT/file3 $MNT/A/hard_link
# Filesystem looks like:
#
# . (ino 256)
# |----- file1 (ino 257)
# |----- file2 (ino 258)
# |----- file3 (ino 259)
# |----- A/ (ino 260)
# |---- hard_link (ino 259)
#
# Now create the base snapshot, which is going to be the parent snapshot
# for a later incremental send.
btrfs subvolume snapshot -r $MNT $MNT/snap1
btrfs send -f /tmp/snap1.send $MNT/snap1
# Move inode 257 into directory inode 260. This results in computing the
# path for inode 260 as "/A" and caching it.
mv $MNT/file1 $MNT/A/file1
# Move inode 258 (file2) into directory inode 260, with a name of
# "hard_link", moving first inode 259 away since it currently has that
# location and name.
mv $MNT/A/hard_link $MNT/tmp
mv $MNT/file2 $MNT/A/hard_link
# Now rename inode 260 to something else (B for example) and then create
# a hard link for inode 258 that has the old name and location of inode
# 260 ("/A").
mv $MNT/A $MNT/B
ln $MNT/B/hard_link $MNT/A
# Filesystem now looks like:
#
# . (ino 256)
# |----- tmp (ino 259)
# |----- file3 (ino 259)
# |----- B/ (ino 260)
# | |---- file1 (ino 257)
# | |---- hard_link (ino 258)
# |
# |----- A (ino 258)
# Create another snapshot of our subvolume and use it for an incremental
# send.
btrfs subvolume snapshot -r $MNT $MNT/snap2
btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2
# Now unmount the filesystem, create a new one, mount it and try to
# apply both send streams to recreate both snapshots.
umount $DEV
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# First add the first snapshot to the new filesystem by applying the
# first send stream.
btrfs receive -f /tmp/snap1.send $MNT
# The incremental receive operation below used to fail with the
# following error:
#
# ERROR: unlink A/hard_link failed: No such file or directory
#
# This is because when send is processing inode 257, it generates the
# path for inode 260 as "/A", since that inode is its parent in the send
# snapshot, and caches that path.
#
# Later when processing inode 258, it first processes its new reference
# that has the path of "/A", which results in orphanizing inode 260
# because there is a a path collision. This results in issuing a rename
# operation from "/A" to "/o260-6-0".
#
# Finally when processing the new reference "B/hard_link" for inode 258,
# it notices that it collides with inode 259 (not yet processed, because
# it has a higher inode number), since that inode has the name
# "hard_link" under the directory inode 260. It also checks that inode
# 259 has two hardlinks, so it decides to issue a unlink operation for
# the name "hard_link" for inode 259. However the path passed to the
# unlink operation is "/A/hard_link", which is incorrect since currently
# "/A" does not exists, due to the orphanization of inode 260 mentioned
# before. The path is incorrect because it was computed and cached
# before the orphanization. This results in the receiver to fail with
# the above error.
btrfs receive -f /tmp/snap2.send $MNT
umount $MNT
When running the test, it fails like this:
$ ./test-send-unlink.sh
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
At subvol /mnt/sdi/snap1
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
At subvol /mnt/sdi/snap2
At subvol snap1
At snapshot snap2
ERROR: unlink A/hard_link failed: No such file or directory
Fix this by recomputing a path before issuing an unlink operation when
processing the new references for the current inode if we previously
have orphanized a directory.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Filipe Manana
|
f9baa501b4 |
btrfs: fix deadlock when cloning inline extents and using qgroups
There are a few exceptional cases where cloning an inline extent needs to copy the inline extent data into a page of the destination inode. When this happens, we end up starting a transaction while having a dirty page for the destination inode and while having the range locked in the destination's inode iotree too. Because when reserving metadata space for a transaction we may need to flush existing delalloc in case there is not enough free space, we have a mechanism in place to prevent a deadlock, which was introduced in commit |
||
|
Filipe Manana
|
ace75066ce |
btrfs: improve btree readahead for full send operations
Currently a full send operation uses the standard btree readahead when
iterating over the subvolume/snapshot btree, which despite bringing good
performance benefits, it could be improved in a few aspects for use cases
such as full send operations, which are guaranteed to visit every node
and leaf of a btree, in ascending and sequential order. The limitations
of that standard btree readahead implementation are the following:
1) It only triggers readahead for leaves that are physically close
to the leaf being read, within a 64K range;
2) It only triggers readahead for the next or previous leaves if the
leaf being read is not currently in memory;
3) It never triggers readahead for nodes.
So add a new readahead mode that addresses all these points and use it
for full send operations.
The following test script was used to measure the improvement on a box
using an average, consumer grade, spinning disk and with 16GiB of RAM:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit
MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit
mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
# Create files with inline data to make it easier and faster to create
# large btrees.
add_files()
{
local total=$1
local start_offset=$2
local number_jobs=$3
local total_per_job=$(($total / $number_jobs))
echo "Creating $total new files using $number_jobs jobs"
for ((n = 0; n < $number_jobs; n++)); do
(
local start_num=$(($start_offset + $n * $total_per_job))
for ((i = 1; i <= $total_per_job; i++)); do
local file_num=$((start_num + $i))
local file_path="$MNT/file_${file_num}"
xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null
if [ $? -ne 0 ]; then
echo "Failed creating file $file_path"
break
fi
done
) &
worker_pids[$n]=$!
done
wait ${worker_pids[@]}
sync
echo
echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)"
}
initial_file_count=500000
add_files $initial_file_count 0 4
echo
echo "Creating first snapshot..."
btrfs subvolume snapshot -r $MNT $MNT/snap1
echo
echo "Adding more files..."
add_files $((initial_file_count / 4)) $initial_file_count 4
echo
echo "Updating 1/50th of the initial files..."
for ((i = 1; i < $initial_file_count; i += 50)); do
xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null
done
echo
echo "Creating second snapshot..."
btrfs subvolume snapshot -r $MNT $MNT/snap2
umount $MNT
echo 3 > /proc/sys/vm/drop_caches
blockdev --flushbufs $DEV &> /dev/null
hdparm -F $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
echo
echo "Testing full send..."
start=$(date +%s)
btrfs send $MNT/snap1 > /dev/null
end=$(date +%s)
echo
echo "Full send took $((end - start)) seconds"
umount $MNT
The durations of the full send operation in seconds were the following:
Before this change: 217 seconds
After this change: 205 seconds (-5.7%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Filipe Manana
|
2ce73c6335 |
btrfs: add btree read ahead for incremental send operations
Currently we do not do btree read ahead when doing an incremental send,
however we know that we will read and process any node or leaf in the
send root that has a generation greater than the generation of the parent
root. So triggering read ahead for such nodes and leafs is beneficial
for an incremental send.
This change does that, triggers read ahead of any node or leaf in the
send root that has a generation greater then the generation of the
parent root. As for the parent root, no readahead is triggered because
knowing in advance which nodes/leaves are going to be read is not so
linear and there's often a large time window between visiting nodes or
leaves of the parent root. So I opted to leave out the parent root,
and triggering read ahead for its nodes/leaves seemed to have not made
significant difference.
The following test script was used to measure the improvement on a box
using an average, consumer grade, spinning disk and with 16GiB of ram:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit
MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit
mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
# Create files with inline data to make it easier and faster to create
# large btrees.
add_files()
{
local total=$1
local start_offset=$2
local number_jobs=$3
local total_per_job=$(($total / $number_jobs))
echo "Creating $total new files using $number_jobs jobs"
for ((n = 0; n < $number_jobs; n++)); do
(
local start_num=$(($start_offset + $n * $total_per_job))
for ((i = 1; i <= $total_per_job; i++)); do
local file_num=$((start_num + $i))
local file_path="$MNT/file_${file_num}"
xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null
if [ $? -ne 0 ]; then
echo "Failed creating file $file_path"
break
fi
done
) &
worker_pids[$n]=$!
done
wait ${worker_pids[@]}
sync
echo
echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)"
}
initial_file_count=500000
add_files $initial_file_count 0 4
echo
echo "Creating first snapshot..."
btrfs subvolume snapshot -r $MNT $MNT/snap1
echo
echo "Adding more files..."
add_files $((initial_file_count / 4)) $initial_file_count 4
echo
echo "Updating 1/50th of the initial files..."
for ((i = 1; i < $initial_file_count; i += 50)); do
xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null
done
echo
echo "Creating second snapshot..."
btrfs subvolume snapshot -r $MNT $MNT/snap2
umount $MNT
echo 3 > /proc/sys/vm/drop_caches
blockdev --flushbufs $DEV &> /dev/null
hdparm -F $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
echo
echo "Testing full send..."
start=$(date +%s)
btrfs send $MNT/snap1 > /dev/null
end=$(date +%s)
echo
echo "Full send took $((end - start)) seconds"
umount $MNT
echo 3 > /proc/sys/vm/drop_caches
blockdev --flushbufs $DEV &> /dev/null
hdparm -F $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
echo
echo "Testing incremental send..."
start=$(date +%s)
btrfs send -p $MNT/snap1 $MNT/snap2 > /dev/null
end=$(date +%s)
echo
echo "Incremental send took $((end - start)) seconds"
umount $MNT
Before this change, incremental send duration:
with $initial_file_count == 200000: 51 seconds
with $initial_file_count == 500000: 168 seconds
After this change, incremental send duration:
with $initial_file_count == 200000: 39 seconds (-26.7%)
with $initial_file_count == 500000: 125 seconds (-29.4%)
For $initial_file_count == 200000 there are 62600 nodes and leaves in the
btree of the first snapshot, and 77759 nodes and leaves in the btree of
the second snapshot. The root nodes were at level 2.
While for $initial_file_count == 500000 there are 152476 nodes and leaves
in the btree of the first snapshot, and 190511 nodes and leaves in the
btree of the second snapshot. The root nodes were at level 2 as well.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Filipe Manana
|
19358b154f |
btrfs: add btree read ahead for full send operations
When doing a full send we know that we are going to be reading every node
and leaf of the send root, so we benefit from enabling read ahead for the
btree.
This change enables read ahead for full send operations only, incremental
sends will have read ahead enabled in a different way by a separate patch.
The following test script was used to measure the improvement on a box
using an average, consumer grade, spinning disk and with 16GiB of RAM:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit
MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit
mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
# Create files with inline data to make it easier and faster to create
# large btrees.
add_files()
{
local total=$1
local start_offset=$2
local number_jobs=$3
local total_per_job=$(($total / $number_jobs))
echo "Creating $total new files using $number_jobs jobs"
for ((n = 0; n < $number_jobs; n++)); do
(
local start_num=$(($start_offset + $n * $total_per_job))
for ((i = 1; i <= $total_per_job; i++)); do
local file_num=$((start_num + $i))
local file_path="$MNT/file_${file_num}"
xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null
if [ $? -ne 0 ]; then
echo "Failed creating file $file_path"
break
fi
done
) &
worker_pids[$n]=$!
done
wait ${worker_pids[@]}
sync
echo
echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)"
}
initial_file_count=500000
add_files $initial_file_count 0 4
echo
echo "Creating first snapshot..."
btrfs subvolume snapshot -r $MNT $MNT/snap1
echo
echo "Adding more files..."
add_files $((initial_file_count / 4)) $initial_file_count 4
echo
echo "Updating 1/50th of the initial files..."
for ((i = 1; i < $initial_file_count; i += 50)); do
xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null
done
echo
echo "Creating second snapshot..."
btrfs subvolume snapshot -r $MNT $MNT/snap2
umount $MNT
echo 3 > /proc/sys/vm/drop_caches
blockdev --flushbufs $DEV &> /dev/null
hdparm -F $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
echo
echo "Testing full send..."
start=$(date +%s)
btrfs send $MNT/snap1 > /dev/null
end=$(date +%s)
echo
echo "Full send took $((end - start)) seconds"
umount $MNT
echo 3 > /proc/sys/vm/drop_caches
blockdev --flushbufs $DEV &> /dev/null
hdparm -F $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
echo
echo "Testing incremental send..."
start=$(date +%s)
btrfs send -p $MNT/snap1 $MNT/snap2 > /dev/null
end=$(date +%s)
echo
echo "Incremental send took $((end - start)) seconds"
umount $MNT
Before this change, full send duration:
with $initial_file_count == 200000: 165 seconds
with $initial_file_count == 500000: 407 seconds
After this change, full send duration:
with $initial_file_count == 200000: 149 seconds (-10.2%)
with $initial_file_count == 500000: 353 seconds (-14.2%)
For $initial_file_count == 200000 there are 62600 nodes and leaves in the
btree of the first snapshot, while for $initial_file_count == 500000 there
are 152476 nodes and leaves. The roots were at level 2.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
Linus Torvalds
|
7a7fd0de4a |
Merge branch 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull kmap conversion updates from David Sterba:
"This contains changes regarding kmap API use and eg conversion from
kmap_atomic to kmap_local_page.
The API belongs to memory management but to save cross-tree
dependency headaches we've agreed to take it through the btrfs tree
because there are some trivial conversions possible, while the rest
will need some time and getting the easy cases out of the way would be
convenient.
The changes can be grouped:
- function exports, new helpers
- new VM_BUG_ON for additional verification; it's been discussed if
it should be VM_BUG_ON or BUG_ON, the former was chosen due to
performance reasons
- code replaced by relevant helpers"
[ This is an updated version of a request that originally came in during
the merge window, but I asked for some updates:
https://lore.kernel.org/lkml/cover.1614090658.git.dsterba@suse.com/
which is why this got merge after the merge window closed. - Linus ]
* 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use copy_highpage() instead of 2 kmaps()
btrfs: use memcpy_[to|from]_page() and kmap_local_page()
mm/highmem: Add VM_BUG_ON() to mem*_page() calls
mm/highmem: Introduce memcpy_page(), memmove_page(), and memset_page()
mm/highmem: Convert memcpy_[to|from]_page() to kmap_local_page()
mm/highmem: Lift memcpy_[to|from]_page to core
|
||
Ira Weiny
|
3590ec5899 |
btrfs: use memcpy_[to|from]_page() and kmap_local_page()
There are many places where the pattern kmap/memcpy/kunmap occurs. This pattern was lifted to the core common functions memcpy_[to|from]_page(). Use these new functions to reduce the code, eliminate direct uses of kmap, and leverage the new core functions use of kmap_local_page(). Also, there is 1 place where a kmap/memcpy is followed by an optional memset. Here we leave the kmap open coded to avoid remapping the page but use kmap_local_page() directly. Development of this patch was aided by the coccinelle script: // <smpl> // SPDX-License-Identifier: GPL-2.0-only // Find kmap/memcpy/kunmap pattern and replace with memcpy*page calls // // NOTE: Offsets and other expressions may be more complex than what the script // will automatically generate. Therefore a catchall rule is provided to find // the pattern which then must be evaluated by hand. // // Confidence: Low // Copyright: (C) 2021 Intel Corporation // URL: http://coccinelle.lip6.fr/ // Comments: // Options: // // simple memcpy version // @ memcpy_rule1 @ expression page, T, F, B, Off; identifier ptr; type VP; @@ ( -VP ptr = kmap(page); | -ptr = kmap(page); | -VP ptr = kmap_atomic(page); | -ptr = kmap_atomic(page); ) <+... ( -memcpy(ptr + Off, F, B); +memcpy_to_page(page, Off, F, B); | -memcpy(ptr, F, B); +memcpy_to_page(page, 0, F, B); | -memcpy(T, ptr + Off, B); +memcpy_from_page(T, page, Off, B); | -memcpy(T, ptr, B); +memcpy_from_page(T, page, 0, B); ) ...+> ( -kunmap(page); | -kunmap_atomic(ptr); ) // Remove any pointers left unused @ depends on memcpy_rule1 @ identifier memcpy_rule1.ptr; type VP, VP1; @@ -VP ptr; ... when != ptr; ? VP1 ptr; // // Some callers kmap without a temp pointer // @ memcpy_rule2 @ expression page, T, Off, F, B; @@ <+... ( -memcpy(kmap(page) + Off, F, B); +memcpy_to_page(page, Off, F, B); | -memcpy(kmap(page), F, B); +memcpy_to_page(page, 0, F, B); | -memcpy(T, kmap(page) + Off, B); +memcpy_from_page(T, page, Off, B); | -memcpy(T, kmap(page), B); +memcpy_from_page(T, page, 0, B); ) ...+> -kunmap(page); // No need for the ptr variable removal // // Catch all // @ memcpy_rule3 @ expression page; expression GenTo, GenFrom, GenSize; identifier ptr; type VP; @@ ( -VP ptr = kmap(page); | -ptr = kmap(page); | -VP ptr = kmap_atomic(page); | -ptr = kmap_atomic(page); ) <+... ( // // Some call sites have complex expressions within the memcpy // match a catch all to be evaluated by hand. // -memcpy(GenTo, GenFrom, GenSize); +memcpy_to_pageExtra(page, GenTo, GenFrom, GenSize); +memcpy_from_pageExtra(GenTo, page, GenFrom, GenSize); ) ...+> ( -kunmap(page); | -kunmap_atomic(ptr); ) // Remove any pointers left unused @ depends on memcpy_rule3 @ identifier memcpy_rule3.ptr; type VP, VP1; @@ -VP ptr; ... when != ptr; ? VP1 ptr; // <smpl> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Roman Anasal
|
8898038309 |
btrfs: send: use struct send_ctx *sctx for btrfs_compare_trees and changed_cb
btrfs_compare_trees and changed_cb use a void *ctx parameter instead of
struct send_ctx *sctx but when used in changed_cb it is immediately
cast to `struct send_ctx *sctx = ctx;`.
changed_cb is only ever called from btrfs_compare_trees and full_send_tree:
- full_send_tree already passes a struct send_ctx *sctx
- btrfs_compare_trees is only called by send_subvol with a struct send_ctx *sctx
- void *ctx in btrfs_compare_trees is only used to be passed to changed_cb
So casting to/from void *ctx seems unnecessary and directly using
struct send_ctx *sctx instead provides better type-safety.
The original reason for using void *ctx in the first place seems to have
been dropped with
|
||
|
Filipe Manana
|
9c4a062a94 |
btrfs: send: remove stale code when checking for shared extents
After commit
|
||
|
Filipe Manana
|
518837e650 |
btrfs: send: fix invalid clone operations when cloning from the same file and root
When an incremental send finds an extent that is shared, it checks which file extent items in the range refer to that extent, and for those it emits clone operations, while for others it emits regular write operations to avoid corruption at the destination (as described and fixed by commit |
||
|
Filipe Manana
|
0b3f407e67 |
btrfs: send: fix wrong file path when there is an inode with a pending rmdir
When doing an incremental send, if we have a new inode that happens to have the same number that an old directory inode had in the base snapshot and that old directory has a pending rmdir operation, we end up computing a wrong path for the new inode, causing the receiver to fail. Example reproducer: $ cat test-send-rmdir.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT mkdir $MNT/dir touch $MNT/dir/file1 touch $MNT/dir/file2 touch $MNT/dir/file3 # Filesystem looks like: # # . (ino 256) # |----- dir/ (ino 257) # |----- file1 (ino 258) # |----- file2 (ino 259) # |----- file3 (ino 260) # btrfs subvolume snapshot -r $MNT $MNT/snap1 btrfs send -f /tmp/snap1.send $MNT/snap1 # Now remove our directory and all its files. rm -fr $MNT/dir # Unmount the filesystem and mount it again. This is to ensure that # the next inode that is created ends up with the same inode number # that our directory "dir" had, 257, which is the first free "objectid" # available after mounting again the filesystem. umount $MNT mount $DEV $MNT # Now create a new file (it could be a directory as well). touch $MNT/newfile # Filesystem now looks like: # # . (ino 256) # |----- newfile (ino 257) # btrfs subvolume snapshot -r $MNT $MNT/snap2 btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2 # Now unmount the filesystem, create a new one, mount it and try to apply # both send streams to recreate both snapshots. umount $DEV mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT btrfs receive -f /tmp/snap1.send $MNT btrfs receive -f /tmp/snap2.send $MNT umount $MNT When running the test, the receive operation for the incremental stream fails: $ ./test-send-rmdir.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: chown o257-9-0 failed: No such file or directory So fix this by tracking directories that have a pending rmdir by inode number and generation number, instead of only inode number. A test case for fstests follows soon. Reported-by: Massimo B. <massimo.b@gmx.net> Tested-by: Massimo B. <massimo.b@gmx.net> Link: https://lore.kernel.org/linux-btrfs/6ae34776e85912960a253a8327068a892998e685.camel@gmx.net/ CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
09e3a28892 |
btrfs: send: use helpers to access root_item::ctransid
We have helpers to access the on-disk item members, use that for root_item::ctransid instead of raw le64_to_cpu. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
9c2b4e0347 |
btrfs: send, recompute reference path after orphanization of a directory
During an incremental send, when an inode has multiple new references we might end up emitting rename operations for orphanizations that have a source path that is no longer valid due to a previous orphanization of some directory inode. This causes the receiver to fail since it tries to rename a path that does not exists. Example reproducer: $ cat reproducer.sh #!/bin/bash mkfs.btrfs -f /dev/sdi >/dev/null mount /dev/sdi /mnt/sdi touch /mnt/sdi/f1 touch /mnt/sdi/f2 mkdir /mnt/sdi/d1 mkdir /mnt/sdi/d1/d2 # Filesystem looks like: # # . (ino 256) # |----- f1 (ino 257) # |----- f2 (ino 258) # |----- d1/ (ino 259) # |----- d2/ (ino 260) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1 btrfs send -f /tmp/snap1.send /mnt/sdi/snap1 # Now do a series of changes such that: # # *) inode 258 has one new hardlink and the previous name changed # # *) both names conflict with the old names of two other inodes: # # 1) the new name "d1" conflicts with the old name of inode 259, # under directory inode 256 (root) # # 2) the new name "d2" conflicts with the old name of inode 260 # under directory inode 259 # # *) inodes 259 and 260 now have the old names of inode 258 # # *) inode 257 is now located under inode 260 - an inode with a number # smaller than the inode (258) for which we created a second hard # link and swapped its names with inodes 259 and 260 # ln /mnt/sdi/f2 /mnt/sdi/d1/f2_link mv /mnt/sdi/f1 /mnt/sdi/d1/d2/f1 # Swap d1 and f2. mv /mnt/sdi/d1 /mnt/sdi/tmp mv /mnt/sdi/f2 /mnt/sdi/d1 mv /mnt/sdi/tmp /mnt/sdi/f2 # Swap d2 and f2_link mv /mnt/sdi/f2/d2 /mnt/sdi/tmp mv /mnt/sdi/f2/f2_link /mnt/sdi/f2/d2 mv /mnt/sdi/tmp /mnt/sdi/f2/f2_link # Filesystem now looks like: # # . (ino 256) # |----- d1 (ino 258) # |----- f2/ (ino 259) # |----- f2_link/ (ino 260) # | |----- f1 (ino 257) # | # |----- d2 (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2 btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2 mkfs.btrfs -f /dev/sdj >/dev/null mount /dev/sdj /mnt/sdj btrfs receive -f /tmp/snap1.send /mnt/sdj btrfs receive -f /tmp/snap2.send /mnt/sdj umount /mnt/sdi umount /mnt/sdj When executed the receive of the incremental stream fails: $ ./reproducer.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: rename d1/d2 -> o260-6-0 failed: No such file or directory This happens because: 1) When processing inode 257 we end up computing the name for inode 259 because it is an ancestor in the send snapshot, and at that point it still has its old name, "d1", from the parent snapshot because inode 259 was not yet processed. We then cache that name, which is valid until we start processing inode 259 (or set the progress to 260 after processing its references); 2) Later we start processing inode 258 and collecting all its new references into the list sctx->new_refs. The first reference in the list happens to be the reference for name "d1" while the reference for name "d2" is next (the last element of the list). We compute the full path "d1/d2" for this second reference and store it in the reference (its ->full_path member). The path used for the new parent directory was "d1" and not "f2" because inode 259, the new parent, was not yet processed; 3) When we start processing the new references at process_recorded_refs() we start with the first reference in the list, for the new name "d1". Because there is a conflicting inode that was not yet processed, which is directory inode 259, we orphanize it, renaming it from "d1" to "o259-6-0"; 4) Then we start processing the new reference for name "d2", and we realize it conflicts with the reference of inode 260 in the parent snapshot. So we issue an orphanization operation for inode 260 by emitting a rename operation with a destination path of "o260-6-0" and a source path of "d1/d2" - this source path is the value we stored in the reference earlier at step 2), corresponding to the ->full_path member of the reference, however that path is no longer valid due to the orphanization of the directory inode 259 in step 3). This makes the receiver fail since the path does not exists, it should have been "o259-6-0/d2". Fix this by recomputing the full path of a reference before emitting an orphanization if we previously orphanized any directory, since that directory could be a parent in the new path. This is a rare scenario so keeping it simple and not checking if that previously orphanized directory is in fact an ancestor of the inode we are trying to orphanize. A test case for fstests follows soon. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
98272bb77b |
btrfs: send, orphanize first all conflicting inodes when processing references
When doing an incremental send it is possible that when processing the new references for an inode we end up issuing rename or link operations that have an invalid path, which contains the orphanized name of a directory before we actually orphanized it, causing the receiver to fail. The following reproducer triggers such scenario: $ cat reproducer.sh #!/bin/bash mkfs.btrfs -f /dev/sdi >/dev/null mount /dev/sdi /mnt/sdi touch /mnt/sdi/a touch /mnt/sdi/b mkdir /mnt/sdi/testdir # We want "a" to have a lower inode number then "testdir" (257 vs 259). mv /mnt/sdi/a /mnt/sdi/testdir/a # Filesystem looks like: # # . (ino 256) # |----- testdir/ (ino 259) # | |----- a (ino 257) # | # |----- b (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1 btrfs send -f /tmp/snap1.send /mnt/sdi/snap1 # Now rename 259 to "testdir_2", then change the name of 257 to # "testdir" and make it a direct descendant of the root inode (256). # Also create a new link for inode 257 with the old name of inode 258. # By swapping the names and location of several inodes and create a # nasty dependency chain of rename and link operations. mv /mnt/sdi/testdir/a /mnt/sdi/a2 touch /mnt/sdi/testdir/a mv /mnt/sdi/b /mnt/sdi/b2 ln /mnt/sdi/a2 /mnt/sdi/b mv /mnt/sdi/testdir /mnt/sdi/testdir_2 mv /mnt/sdi/a2 /mnt/sdi/testdir # Filesystem now looks like: # # . (ino 256) # |----- testdir_2/ (ino 259) # | |----- a (ino 260) # | # |----- testdir (ino 257) # |----- b (ino 257) # |----- b2 (ino 258) btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2 btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2 mkfs.btrfs -f /dev/sdj >/dev/null mount /dev/sdj /mnt/sdj btrfs receive -f /tmp/snap1.send /mnt/sdj btrfs receive -f /tmp/snap2.send /mnt/sdj umount /mnt/sdi umount /mnt/sdj When running the reproducer, the receive of the incremental send stream fails: $ ./reproducer.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: link b -> o259-6-0/a failed: No such file or directory The problem happens because of the following: 1) Before we start iterating the list of new references for inode 257, we generate its current path and store it at @valid_path, done at the very beginning of process_recorded_refs(). The generated path is "o259-6-0/a", containing the orphanized name for inode 259; 2) Then we iterate over the list of new references, which has the references "b" and "testdir" in that specific order; 3) We process reference "b" first, because it is in the list before reference "testdir". We then issue a link operation to create the new reference "b" using a target path corresponding to the content at @valid_path, which corresponds to "o259-6-0/a". However we haven't yet orphanized inode 259, its name is still "testdir", and not "o259-6-0". The orphanization of 259 did not happen yet because we will process the reference named "testdir" for inode 257 only in the next iteration of the loop that goes over the list of new references. Fix the issue by having a preliminar iteration over all the new references at process_recorded_refs(). This iteration is responsible only for doing the orphanization of other inodes that have and old reference that conflicts with one of the new references of the inode we are currently processing. The emission of rename and link operations happen now in the next iteration of the new references. A test case for fstests will follow soon. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
e2f896b318 |
btrfs: send: use helpers for unaligned access to header members
The header is mapped onto the send buffer and thus its members may be potentially unaligned so use the helpers instead of directly assigning the pointers. This has worked so far but let's use the helpers to make that clear. Signed-off-by: David Sterba <dsterba@suse.com> |
||
Denis Efremov
|
bae12df966 |
btrfs: use kvcalloc for allocation in btrfs_ioctl_send()
Replace kvzalloc() call with kvcalloc() that also checks the size internally. There's a standalone overflow check in the function so we can return invalid parameter combination. Use array_size() helper to compute the memory size for clone_sources_tmp. Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Denis Efremov
|
8eb2fd0015 |
btrfs: use kvzalloc() to allocate clone_roots in btrfs_ioctl_send()
btrfs_ioctl_send() used open-coded kvzalloc implementation earlier.
The code was accidentally replaced with kzalloc() call [1]. Restore
the original code by using kvzalloc() to allocate sctx->clone_roots.
[1] https://patchwork.kernel.org/patch/9757891/#20529627
Fixes:
|
||
|
Omar Sandoval
|
c9a949af13 |
btrfs: send: use btrfs_file_extent_end() in send_write_or_clone()
send_write_or_clone() basically has an open-coded copy of btrfs_file_extent_end() except that it (incorrectly) aligns to PAGE_SIZE instead of sectorsize. Fix and simplify the code by using btrfs_file_extent_end(). Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Omar Sandoval
|
8c7d9fe06f |
btrfs: send: avoid copying file data
send_write() currently copies from the page cache to sctx->read_buf, and then from sctx->read_buf to sctx->send_buf. Similarly, send_hole() zeroes sctx->read_buf and then copies from sctx->read_buf to sctx->send_buf. However, if we write the TLV header manually, we can copy to sctx->send_buf directly and get rid of sctx->read_buf. Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Omar Sandoval
|
a9b2e0de92 |
btrfs: send: get rid of i_size logic in send_write()
send_write()/fill_read_buf() have some logic for avoiding reading past i_size. However, everywhere that we call send_write()/send_extent_data(), we've already clamped the length down to i_size. Get rid of the i_size handling, which simplifies the next change. Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
1b51d6fce4 |
btrfs: send: remove indirect callback parameter for changed_cb
There's a custom callback passed to btrfs_compare_trees which happens to be named exactly same as the existing function implementing it. This is confusing and the indirection is not necessary for our needs. Compiler is clever enough to call it directly so there's effectively no change. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Linus Torvalds
|
f3cdc8ae11 |
for-5.8-tag
-----BEGIN PGP SIGNATURE-----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=qTt8
-----END PGP SIGNATURE-----
Merge tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Highlights:
- speedup dead root detection during orphan cleanup, eg. when there
are many deleted subvolumes waiting to be cleaned, the trees are
now looked up in radix tree instead of a O(N^2) search
- snapshot creation with inherited qgroup will mark the qgroup
inconsistent, requires a rescan
- send will emit file capabilities after chown, this produces a
stream that does not need postprocessing to set the capabilities
again
- direct io ported to iomap infrastructure, cleaned up and simplified
code, notably removing last use of struct buffer_head in btrfs code
Core changes:
- factor out backreference iteration, to be used by ordinary
backreferences and relocation code
- improved global block reserve utilization
* better logic to serialize requests
* increased maximum available for unlink
* improved handling on large pages (64K)
- direct io cleanups and fixes
* simplify layering, where cloned bios were unnecessarily created
for some cases
* error handling fixes (submit, endio)
* remove repair worker thread, used to avoid deadlocks during
repair
- refactored block group reading code, preparatory work for new type
of block group storage that should improve mount time on large
filesystems
Cleanups:
- cleaned up (and slightly sped up) set/get helpers for metadata data
structure members
- root bit REF_COWS got renamed to SHAREABLE to reflect the that the
blocks of the tree get shared either among subvolumes or with the
relocation trees
Fixes:
- when subvolume deletion fails due to ENOSPC, the filesystem is not
turned read-only
- device scan deals with devices from other filesystems that changed
ownership due to overwrite (mkfs)
- fix a race between scrub and block group removal/allocation
- fix long standing bug of a runaway balance operation, printing the
same line to the syslog, caused by a stale status bit on a reloc
tree that prevented progress
- fix corrupt log due to concurrent fsync of inodes with shared
extents
- fix space underflow for NODATACOW and buffered writes when it for
some reason needs to fallback to COW mode"
* tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (133 commits)
btrfs: fix space_info bytes_may_use underflow during space cache writeout
btrfs: fix space_info bytes_may_use underflow after nocow buffered write
btrfs: fix wrong file range cleanup after an error filling dealloc range
btrfs: remove redundant local variable in read_block_for_search
btrfs: open code key_search
btrfs: split btrfs_direct_IO to read and write part
btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
fs: remove dio_end_io()
btrfs: switch to iomap_dio_rw() for dio
iomap: remove lockdep_assert_held()
iomap: add a filesystem hook for direct I/O bio submission
fs: export generic_file_buffered_read()
btrfs: turn space cache writeout failure messages into debug messages
btrfs: include error on messages about failure to write space/inode caches
btrfs: remove useless 'fail_unlock' label from btrfs_csum_file_blocks()
btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums
btrfs: make checksum item extension more efficient
btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents
btrfs: unexport btrfs_compress_set_level()
btrfs: simplify iget helpers
...
|
||
|
David Sterba
|
0202e83fda |
btrfs: simplify iget helpers
The inode lookup starting at btrfs_iget takes the full location key, while only the objectid is used to match the inode, because the lookup happens inside the given root thus the inode number is unique. The entire location key is properly set up in btrfs_init_locked_inode. Simplify the helpers and pass only inode number, renaming it to 'ino' instead of 'objectid'. This allows to remove temporary variables key, saving some stack space. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
56e9357a1e |
btrfs: simplify root lookup by id
The main function to lookup a root by its id btrfs_get_fs_root takes the whole key, while only using the objectid. The value of offset is preset to (u64)-1 but not actually used until btrfs_find_root that does the actual search. Switch btrfs_get_fs_root to use only objectid and remove all local variables that existed just for the lookup. The actual key for search is set up in btrfs_get_fs_root, reusing another key variable. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Marcos Paulo de Souza
|
89efda52e6 |
btrfs: send: emit file capabilities after chown
Whenever a chown is executed, all capabilities of the file being touched are lost. When doing incremental send with a file with capabilities, there is a situation where the capability can be lost on the receiving side. The sequence of actions bellow shows the problem: $ mount /dev/sda fs1 $ mount /dev/sdb fs2 $ touch fs1/foo.bar $ setcap cap_sys_nice+ep fs1/foo.bar $ btrfs subvolume snapshot -r fs1 fs1/snap_init $ btrfs send fs1/snap_init | btrfs receive fs2 $ chgrp adm fs1/foo.bar $ setcap cap_sys_nice+ep fs1/foo.bar $ btrfs subvolume snapshot -r fs1 fs1/snap_complete $ btrfs subvolume snapshot -r fs1 fs1/snap_incremental $ btrfs send fs1/snap_complete | btrfs receive fs2 $ btrfs send -p fs1/snap_init fs1/snap_incremental | btrfs receive fs2 At this point, only a chown was emitted by "btrfs send" since only the group was changed. This makes the cap_sys_nice capability to be dropped from fs2/snap_incremental/foo.bar To fix that, only emit capabilities after chown is emitted. The current code first checks for xattrs that are new/changed, emits them, and later emit the chown. Now, __process_new_xattr skips capabilities, letting only finish_inode_if_needed to emit them, if they exist, for the inode being processed. This behavior was being worked around in "btrfs receive" side by caching the capability and only applying it after chown. Now, xattrs are only emmited _after_ chown, making that workaround not needed anymore. Link: https://github.com/kdave/btrfs-progs/issues/202 CC: stable@vger.kernel.org # 4.4+ Suggested-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Al Viro
|
502fd722fe |
btrfs_ioctl_send(): don't bother with access_ok()
we do copy_from_user() on that range anyway Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Josef Bacik
|
c75e839414 |
btrfs: kill the subvol_srcu
Now that we have proper root ref counting everywhere we can kill the subvol_srcu. * removal of fs_info::subvol_srcu reduces size of fs_info by 1176 bytes * the refcount_t used for the references checks for accidental 0->1 in cases where the root lifetime would not be properly protected * there's a leak detector for roots to catch unfreed roots at umount time * SRCU served us well over the years but is was not a proper synchronization mechanism for some cases Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
a5eeb3d17b |
btrfs: add helper to get the end offset of a file extent item
Getting the end offset for a file extent item requires a bit of code since the extent can be either inline or regular/prealloc. There are some places all over the code base that open code this logic and in another patch later in this series it will be needed again. Therefore encapsulate this logic in a helper function and use it. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
0024652895 |
btrfs: rename btrfs_put_fs_root and btrfs_grab_fs_root
We are now using these for all roots, rename them to btrfs_put_root() and btrfs_grab_root(); Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
bc44d7c4b2 |
btrfs: push btrfs_grab_fs_root into btrfs_get_fs_root
Now that all callers of btrfs_get_fs_root are subsequently calling btrfs_grab_fs_root and handling dropping the ref when they are done appropriately, go ahead and push btrfs_grab_fs_root up into btrfs_get_fs_root. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
6f9a3da5da |
btrfs: hold a ref on the root in btrfs_ioctl_send
We lookup all the clone roots and the parent root for send, so we need to hold refs on all of these roots while we're processing them. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
3619c94f07 |
btrfs: open code btrfs_read_fs_root_no_name
All this does is call btrfs_get_fs_root() with check_ref == true. Just use btrfs_get_fs_root() so we don't have a bunch of different helpers that do the same thing. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
9722b10148 |
Btrfs: send, fix emission of invalid clone operations within the same file
When doing an incremental send and a file has extents shared with itself
at different file offsets, it's possible for send to emit clone operations
that will fail at the destination because the source range goes beyond the
file's current size. This happens when the file size has increased in the
send snapshot, there is a hole between the shared extents and both shared
extents are at file offsets which are greater the file's size in the
parent snapshot.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt/sdb
$ xfs_io -f -c "pwrite -S 0xf1 0 64K" /mnt/sdb/foobar
$ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/base
$ btrfs send -f /tmp/1.snap /mnt/sdb/base
# Create a 320K extent at file offset 512K.
$ xfs_io -c "pwrite -S 0xab 512K 64K" /mnt/sdb/foobar
$ xfs_io -c "pwrite -S 0xcd 576K 64K" /mnt/sdb/foobar
$ xfs_io -c "pwrite -S 0xef 640K 64K" /mnt/sdb/foobar
$ xfs_io -c "pwrite -S 0x64 704K 64K" /mnt/sdb/foobar
$ xfs_io -c "pwrite -S 0x73 768K 64K" /mnt/sdb/foobar
# Clone part of that 320K extent into a lower file offset (192K).
# This file offset is greater than the file's size in the parent
# snapshot (64K). Also the clone range is a bit behind the offset of
# the 320K extent so that we leave a hole between the shared extents.
$ xfs_io -c "reflink /mnt/sdb/foobar 448K 192K 192K" /mnt/sdb/foobar
$ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/incr
$ btrfs send -p /mnt/sdb/base -f /tmp/2.snap /mnt/sdb/incr
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ btrfs receive -f /tmp/1.snap /mnt/sdc
$ btrfs receive -f /tmp/2.snap /mnt/sdc
ERROR: failed to clone extents to foobar: Invalid argument
The problem is that after processing the extent at file offset 256K, which
refers to the first 128K of the 320K extent created by the buffered write
operations, we have 'cur_inode_next_write_offset' set to 384K, which
corresponds to the end offset of the partially shared extent (256K + 128K)
and to the current file size in the receiver. Then when we process the
extent at offset 512K, we do extent backreference iteration to figure out
if we can clone the extent from some other inode or from the same inode,
and we consider the extent at offset 256K of the same inode as a valid
source for a clone operation, which is not correct because at that point
the current file size in the receiver is 384K, which corresponds to the
end of last processed extent (at file offset 256K), so using a clone
source range from 256K to 256K + 320K is invalid because that goes past
the current size of the file (384K) - this makes the receiver get an
-EINVAL error when attempting the clone operation.
So fix this by excluding clone sources that have a range that goes beyond
the current file size in the receiver when iterating extent backreferences.
A test case for fstests follows soon.
Fixes:
|
||
Anand Jain
|
fbd542971a |
btrfs: send: remove WARN_ON for readonly mount
We log warning if root::orphan_cleanup_state is not set to ORPHAN_CLEANUP_DONE in btrfs_ioctl_send(). However if the filesystem is mounted as readonly we skip the orphan item cleanup during the lookup and root::orphan_cleanup_state remains at the init state 0 instead of ORPHAN_CLEANUP_DONE (2). So during send in btrfs_ioctl_send() we hit the warning as below. WARN_ON(send_root->orphan_cleanup_state != ORPHAN_CLEANUP_DONE); WARNING: CPU: 0 PID: 2616 at /Volumes/ws/btrfs-devel/fs/btrfs/send.c:7090 btrfs_ioctl_send+0xb2f/0x18c0 [btrfs] :: RIP: 0010:btrfs_ioctl_send+0xb2f/0x18c0 [btrfs] :: Call Trace: :: _btrfs_ioctl_send+0x7b/0x110 [btrfs] btrfs_ioctl+0x150a/0x2b00 [btrfs] :: do_vfs_ioctl+0xa9/0x620 ? __fget+0xac/0xe0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x49/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reproducer: mkfs.btrfs -fq /dev/sdb mount /dev/sdb /btrfs btrfs subvolume create /btrfs/sv1 btrfs subvolume snapshot -r /btrfs/sv1 /btrfs/ss1 umount /btrfs mount -o ro /dev/sdb /btrfs btrfs send /btrfs/ss1 -f /tmp/f The warning exists because having orphan inodes could confuse send and cause it to fail or produce incorrect streams. The two cases that would cause such send failures, which are already fixed are: 1) Inodes that were unlinked - these are orphanized and remain with a link count of 0. These caused send operations to fail because it expected to always find at least one path for an inode. However this is no longer a problem since send is now able to deal with such inodes since commit |
||
|
Filipe Manana
|
fd0ddbe250 |
Btrfs: send, skip backreference walking for extents with many references
Backreference walking, which is used by send to figure if it can issue clone operations instead of write operations, can be very slow and use too much memory when extents have many references. This change simply skips backreference walking when an extent has more than 64 references, in which case we fallback to a write operation instead of a clone operation. This limit is conservative and in practice I observed no signicant slowdown with up to 100 references and still low memory usage up to that limit. This is a temporary workaround until there are speedups in the backref walking code, and as such it does not attempt to add extra interfaces or knobs to tweak the threshold. Reported-by: Atemu <atemu.main@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAE4GHgkvqVADtS4AzcQJxo0Q1jKQgKaW3JGp3SGdoinVo=C9eQ@mail.gmail.com/T/#me55dc0987f9cc2acaa54372ce0492c65782be3fa CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
11f2069c11 |
Btrfs: send, allow clone operations within the same file
For send we currently skip clone operations when the source and
destination files are the same. This is so because clone didn't support
this case in its early days, but support for it was added back in May
2013 by commit
|