* remove interrupt.g inclusion from netdevice.h -- not needed
* fixup fallout, add interrupt.h and hardirq.h back where needed.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RDMA CM currently infers the QP type from the port space selected
by the user. In the future (eg with RDMA_PS_IB or XRC), there may not
be a 1-1 correspondence between port space and QP type. For netlink
export of RDMA CM state, we want to export the QP type to userspace,
so it is cleaner to explicitly associate a QP type to an ID.
Modify rdma_create_id() to allow the user to specify the QP type, and
use it to make our selections of datagram versus connected mode.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andy Grover <andy.grover@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
asm-generic/bitops/le.h is only intended to be included directly from
asm-generic/bitops/ext2-non-atomic.h or asm-generic/bitops/minix-le.h
which implements generic ext2 or minix bit operations.
This stops including asm-generic/bitops/le.h directly and use ext2
non-atomic bit operations instead.
It seems odd to use ext2_*_bit() on rds, but it will replaced with
__{set,clear,test}_bit_le() after introducing little endian bit operations
for all architectures. This indirect step is necessary to maintain
bisectability for some architectures which have their own little-endian
bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andy Grover <andy.grover@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
bonding: enable netpoll without checking link status
xfrm: Refcount destination entry on xfrm_lookup
net: introduce rx_handler results and logic around that
bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
bonding: wrap slave state work
net: get rid of multiple bond-related netdevice->priv_flags
bonding: register slave pointer for rx_handler
be2net: Bump up the version number
be2net: Copyright notice change. Update to Emulex instead of ServerEngines
e1000e: fix kconfig for crc32 dependency
netfilter ebtables: fix xt_AUDIT to work with ebtables
xen network backend driver
bonding: Improve syslog message at device creation time
bonding: Call netif_carrier_off after register_netdevice
bonding: Incorrect TX queue offset
net_sched: fix ip_tos2prio
xfrm: fix __xfrm_route_forward()
be2net: Fix UDP packet detected status in RX compl
Phonet: fix aligned-mode pipe socket buffer header reserve
netxen: support for GbE port settings
...
Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
With cmwq, there's no reason to use dedicated rds_ib_fmr_wq - it's not
in the memory reclaim path and the maximum number of concurrent work
items is bound by the number of devices. Drop it and use system_wq
instead. This rds_ib_fmr_init/exit() noops. Both removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Grover <andy.grover@oracle.com>
Clean up some unused macros in net/*.
1. be left for code change. e.g. PGV_FROM_VMALLOC, PGV_FROM_VMALLOC, KMEM_SAFETYZONE.
2. never be used since introduced to kernel.
e.g. P9_RDMA_MAX_SGE, UTIL_CTRL_PKT_SIZE.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.
Also, use the ccflags-$ flag instead of EXTRA_CFLAGS because EXTRA_CFLAGS is
deprecated and should now be switched.
Last but not least, took out if-conditionals.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rds_cmsg_rdma_args(), the user-provided args->nr_local value is
restricted to less than UINT_MAX. This seems to need a tighter upper
bound, since the calculation of total iov_size can overflow, resulting
in a small sock_kmalloc() allocation. This would probably just result
in walking off the heap and crashing when calling rds_rdma_pages() with
a high count value. If it somehow doesn't crash here, then memory
corruption could occur soon after.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sgs allocation error path leaks the allocated message.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All the rds_tcp_connection objects are stored list, but when
being freed it should be removed from there.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The conn is removed from list in there and this requires
proper lock protection.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even with the previous fix, we still are reading the iovecs once
to determine SGs needed, and then again later on. Preallocating
space for sg lists as part of rds_message seemed like a good idea
but it might be better to not do this. While working to redo that
code, this patch attempts to protect against userspace rewriting
the rds_iovec array between the first and second accesses.
The consequences of this would be either a too-small or too-large
sg list array. Too large is not an issue. This patch changes all
callers of message_alloc_sgs to handle running out of preallocated
sgs, and fail gracefully.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change rds_rdma_pages to take a passed-in rds_iovec array instead
of doing copy_from_user itself.
Change rds_cmsg_rdma_args to copy rds_iovec array once only. This
eliminates the possibility of userspace changing it after our
sanity checks.
Implement stack-based storage for small numbers of iovecs, based
on net/socket.c, to save an alloc in the extremely common case.
Although this patch reduces iovec copies in cmsg_rdma_args to 1,
we still do another one in rds_rdma_extra_size. Getting rid of
that one will be trickier, so it'll be a separate patch.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need to set ret = 0 at the end -- it's initialized to 0.
Also, don't increment s_send_rdma stat if we're exiting with an
error.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rds_cmsg_rdma_args would still return success even if rds_rdma_pages
returned an error (or overflowed).
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Thomas Pollet, the rdma page counting can overflow. We
get the rdma sizes in 64-bit unsigned entities, but then limit it to
UINT_MAX bytes and shift them down to pages (so with a possible "+1" for
an unaligned address).
So each individual page count fits comfortably in an 'unsigned int' (not
even close to overflowing into signed), but as they are added up, they
might end up resulting in a signed return value. Which would be wrong.
Catch the case of tot_pages turning negative, and return the appropriate
error code.
Reported-by: Thomas Pollet <thomas.pollet@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RDS protocol has lots of functions that should be
declared static. rds_message_get/add_version_extension is
removed since it defined but never used.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't try to "optimize" rds_page_copy_user() by using kmap_atomic() and
the unsafe atomic user mode accessor functions. It's actually slower
than the straightforward code on any reasonable modern CPU.
Back when the code was written (although probably not by the time it was
actually merged, though), 32-bit x86 may have been the dominant
architecture. And there kmap_atomic() can be a lot faster than kmap()
(unless you have very good locality, in which case the virtual address
caching by kmap() can overcome all the downsides).
But these days, x86-64 may not be more populous, but it's getting there
(and if you care about performance, it's definitely already there -
you'd have upgraded your CPU's already in the last few years). And on
x86-64, the non-kmap_atomic() version is faster, simply because the code
is simpler and doesn't have the "re-try page fault" case.
People with old hardware are not likely to care about RDS anyway, and
the optimization for the 32-bit case is simply buggy, since it doesn't
verify the user addresses properly.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have for each socket :
One spinlock (sk_slock.slock)
One rwlock (sk_callback_lock)
Possible scenarios are :
(A) (this is used in net/sunrpc/xprtsock.c)
read_lock(&sk->sk_callback_lock) (without blocking BH)
<BH>
spin_lock(&sk->sk_slock.slock);
...
read_lock(&sk->sk_callback_lock);
...
(B)
write_lock_bh(&sk->sk_callback_lock)
stuff
write_unlock_bh(&sk->sk_callback_lock)
(C)
spin_lock_bh(&sk->sk_slock)
...
write_lock_bh(&sk->sk_callback_lock)
stuff
write_unlock_bh(&sk->sk_callback_lock)
spin_unlock_bh(&sk->sk_slock)
This (C) case conflicts with (A) :
CPU1 [A] CPU2 [C]
read_lock(callback_lock)
<BH> spin_lock_bh(slock)
<wait to spin_lock(slock)>
<wait to write_lock_bh(callback_lock)>
We have one problematic (C) use case in inet_csk_listen_stop() :
local_bh_disable();
bh_lock_sock(child); // spin_lock_bh(&sk->sk_slock)
WARN_ON(sock_owned_by_user(child));
...
sock_orphan(child); // write_lock_bh(&sk->sk_callback_lock)
lockdep is not happy with this, as reported by Tetsuo Handa
It seems only way to deal with this is to use read_lock_bh(callbacklock)
everywhere.
Thanks to Jarek for pointing a bug in my first attempt and suggesting
this solution.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is basically just a cleanup. IRQs were disabled on the previous
line so we don't need to do it again here. In the current code IRQs
would get turned on one line earlier than intended.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the original code if the copy_from_user() fails in rds_rdma_pages()
then the error handling fails and we get a stack trace from kmalloc().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two CMSGs for masked versions of cswp and fadd. args
struct modified to use a union for different atomic op type's
arguments. Change IB to do masked atomic ops. Atomic op type
in rds_message similarly unionized.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
This prints the constant identifier for work completion status and rdma
cm event types, like we already do for IB event types.
A core string array helper is added that each string type uses.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Nothing was canceling the send and receive work that might have been
queued as a conn was being destroyed.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
rds_conn_shutdown() can return before the connection is shut down when
it encounters an existing state that it doesn't understand. This lets
rds_conn_destroy() then start tearing down the conn from under paths
that are still using it.
It's more reliable the shutdown work and wait for krdsd to complete the
shutdown callback. This stopped some hangs I was seeing where krdsd was
trying to shut down a freed conn.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Right now there's nothing to stop the various paths that use
rs->rs_transport from racing with rmmod and executing freed transport
code. The simple fix is to have binding to a transport also hold a
reference to the transport's module, removing this class of races.
We already had an unused t_owner field which was set for the modular
transports and which wasn't set for the built-in loop transport.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
rs_transport is now also used by the rdma paths once the socket is
bound. We don't need this stale comment to tell us what cscope can.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
rds_conn_destroy() can race with all other modifications of the
rds_conn_count but it was modifying the count without locking.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
The RDS IB device list wasn't protected by any locking. Traversal in
both the get_mr and FMR flushing paths could race with additon and
removal.
List manipulation is done with RCU primatives and is protected by the
write side of a rwsem. The list traversal in the get_mr fast path is
protected by a rcu read critical section. The FMR list traversal is
more problematic because it can block while traversing the list. We
protect this with the read side of the rwsem.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
It's nice to not have to go digging in the code to see which event
occurred. It's easy to throw together a quick array that maps the ib
event enums to their strings. I didn't see anything in the stack that
does this translation for us, but I also didn't look very hard.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Flushing FMRs is somewhat expensive, and is currently kicked off when
the interrupt handler notices that we are getting low. The result of
this is that FMR flushing only happens from the interrupt cpus.
This spreads the load more effectively by triggering flushes just before
we allocate a new FMR.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We're seeing bugs today where IB connection shutdown clears the send
ring while the tasklet is processing completed sends. Implementation
details cause this to dereference a null pointer. Shutdown needs to
wait for send completion to stop before tearing down the connection. We
can't simply wait for the ring to empty because it may contain
unsignaled sends that will never be processed.
This patch tracks the number of signaled sends that we've posted and
waits for them to complete. It also makes sure that the tasklet has
finished executing.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
We are *definitely* counting cycles as closely as DaveM, so
ensure hwcache alignment for our recv ring control structs.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
The recv refill path was leaking fragments because the recv event handler had
marked a ring element as free without freeing its frag. This was happening
because it wasn't processing receives when the conn wasn't marked up or
connecting, as can be the case if it races with rmmod.
Two observations support always processing receives in the callback.
First, buildup should only post receives, thus triggering recv event handler
calls, once it has built up all the state to handle them. Teardown should
destroy the CQ and drain the ring before tearing down the state needed to
process recvs. Both appear to be true today.
Second, this test was fundamentally racy. There is nothing to stop rmmod and
connection destruction from swooping in the moment after the conn state was
sampled but before real receive procesing starts.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
We were seeing very nasty bugs due to fundamental assumption the current code
makes about concurrent work struct processing. The code simpy isn't able to
handle concurrent connection shutdown work function execution today, for
example, which is very much possible once a multi-threaded krdsd was
introduced. The problem compounds as additional work structs are added to the
mix.
krdsd is no longer perforance critical now that send and receive posting and
FMR flushing are done elsewhere, so the safest fix is to move back to the
single threaded krdsd that the current code was built around.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
This patch moves the FMR flushing work in to its own mult-threaded work queue.
This is to maintain performance in preparation for returning the main krdsd
work queue back to a single threaded work queue to avoid deep-rooted
concurrency bugs.
This is also good because it further separates FMRs, which might be removed
some day, from the rest of the code base.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
IB connections were not being destroyed during rmmod.
First, recently IB device removal callback was changed to disconnect
connections that used the removing device rather than destroying them. So
connections with devices during rmmod were not being destroyed.
Second, rds_ib_destroy_nodev_conns() was being called before connections are
disassociated with devices. It would almost never find connections in the
nodev list.
We first get rid of rds_ib_destroy_conns(), which is no longer called, and
refactor the existing caller into the main body of the function and get rid of
the list and lock wrappers.
Then we call rds_ib_destroy_nodev_conns() *after* ib_unregister_client() has
removed the IB device from all the conns and put the conns on the nodev list.
The result is that IB connections are destroyed by rmmod.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
The RDS IB client removal callback can queue work to drop the final reference
to an IB device. We have to make sure that this function has returned before
we complete rmmod or the work threads can try to execute freed code.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
