The fs_info can be fetched from the transaction handle directly.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It can be fetched from the transaction handle. In addition, remove the
WARN_ON(trans == NULL) because it's not possible to hit this condition.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 0b246afa62 ("btrfs: root->fs_info cleanup, add fs_info
convenience variables"), the srcroot is no longer used to get
fs_info::nodesize. In fact, it can be dropped after commit 707e8a0715
("btrfs: use nodesize everywhere, kill leafsize").
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 5d23515be6 ("btrfs: Move qgroup rescan on quota enable to
btrfs_quota_enable") not only resulted in an easier to follow code but
it also introduced a subtle bug. It changed the timing when the initial
transaction rescan was happening:
- before the commit: it would happen after transaction commit had occured
- after the commit: it might happen before the transaction was committed
This results in failure to correctly rescan the quota since there could
be data which is still not committed on disk.
This patch aims to fix this by moving the transaction creation/commit
inside btrfs_quota_enable, which allows to schedule the quota commit
after the transaction has been committed.
Fixes: 5d23515be6 ("btrfs: Move qgroup rescan on quota enable to btrfs_quota_enable")
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Link: https://marc.info/?l=linux-btrfs&m=152999289017582
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a power failure happens while the qgroup rescan kthread is running,
the next mount operation will always fail. This is because of a recent
regression that makes qgroup_rescan_init() incorrectly return -EINVAL
when we are mounting the filesystem (through btrfs_read_qgroup_config()).
This causes the -EINVAL error to be returned regardless of any qgroup
flags being set instead of returning the error only when neither of
the flags BTRFS_QGROUP_STATUS_FLAG_RESCAN nor BTRFS_QGROUP_STATUS_FLAG_ON
are set.
A test case for fstests follows up soon.
Fixes: 9593bf4967 ("btrfs: qgroup: show more meaningful qgroup_rescan_init error message")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit ff3d27a048 ("btrfs: qgroup: Finish rescan when hit the last leaf
of extent tree") added a new exit for rescan finish.
However after finishing quota rescan, we set
fs_info->qgroup_rescan_progress to (u64)-1 before we exit through the
original exit path.
While we missed that assignment of (u64)-1 in the new exit path.
The end result is, the quota status item doesn't have the same value.
(-1 vs the last bytenr + 1)
Although it doesn't affect quota accounting, it's still better to keep
the original behavior.
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Fixes: ff3d27a048 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Error message from qgroup_rescan_init() mostly looks like:
BTRFS info (device nvme0n1p1): qgroup_rescan_init failed with -115
Which is far from meaningful, and sometimes confusing as for above
-EINPROGRESS it's mostly (despite the init race) harmless, but sometimes
it can also indicate problem if the return value is -EINVAL.
Change it to some more meaningful messages like:
BTRFS info (device nvme0n1p1): qgroup rescan is already in progress
And
BTRFS err(device nvme0n1p1): qgroup rescan init failed, qgroup is not enabled
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update the messages and level ]
Signed-off-by: David Sterba <dsterba@suse.com>
Under the following case, qgroup rescan can double account cowed tree
blocks:
In this case, extent tree only has one tree block.
-
| transid=5 last committed=4
| btrfs_qgroup_rescan_worker()
| |- btrfs_start_transaction()
| | transid = 5
| |- qgroup_rescan_leaf()
| |- btrfs_search_slot_for_read() on extent tree
| Get the only extent tree block from commit root (transid = 4).
| Scan it, set qgroup_rescan_progress to the last
| EXTENT/META_ITEM + 1
| now qgroup_rescan_progress = A + 1.
|
| fs tree get CoWed, new tree block is at A + 16K
| transid 5 get committed
-
| transid=6 last committed=5
| btrfs_qgroup_rescan_worker()
| btrfs_qgroup_rescan_worker()
| |- btrfs_start_transaction()
| | transid = 5
| |- qgroup_rescan_leaf()
| |- btrfs_search_slot_for_read() on extent tree
| Get the only extent tree block from commit root (transid = 5).
| scan it using qgroup_rescan_progress (A + 1).
| found new tree block beyong A, and it's fs tree block,
| account it to increase qgroup numbers.
-
In above case, tree block A, and tree block A + 16K get accounted twice,
while qgroup rescan should stop when it already reach the last leaf,
other than continue using its qgroup_rescan_progress.
Such case could happen by just looping btrfs/017 and with some
possibility it can hit such double qgroup accounting problem.
Fix it by checking the path to determine if we should finish qgroup
rescan, other than relying on next loop to exit.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing qgroup rescan using the following script (modified from
btrfs/017 test case), we can sometimes hit qgroup corruption.
------
umount $dev &> /dev/null
umount $mnt &> /dev/null
mkfs.btrfs -f -n 64k $dev
mount $dev $mnt
extent_size=8192
xfs_io -f -d -c "pwrite 0 $extent_size" $mnt/foo > /dev/null
btrfs subvolume snapshot $mnt $mnt/snap
xfs_io -f -c "reflink $mnt/foo" $mnt/foo-reflink > /dev/null
xfs_io -f -c "reflink $mnt/foo" $mnt/snap/foo-reflink > /dev/null
xfs_io -f -c "reflink $mnt/foo" $mnt/snap/foo-reflink2 > /dev/unll
btrfs quota enable $mnt
# -W is the new option to only wait rescan while not starting new one
btrfs quota rescan -W $mnt
btrfs qgroup show -prce $mnt
umount $mnt
# Need to patch btrfs-progs to report qgroup mismatch as error
btrfs check $dev || _fail
------
For fast machine, we can hit some corruption which missed accounting
tree blocks:
------
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 8.00KiB 0.00B none none --- ---
0/257 8.00KiB 0.00B none none --- ---
------
This is due to the fact that we're always searching commit root for
btrfs_find_all_roots() at qgroup_rescan_leaf(), but the leaf we get is
from current transaction, not commit root.
And if our tree blocks get modified in current transaction, we won't
find any owner in commit root, thus causing the corruption.
Fix it by searching commit root for extent tree for
qgroup_rescan_leaf().
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging quota rescan race, some times btrfs rescan could account
some old (committed) leaf and then re-account newly committed leaf
in next generation.
This race needs extra transid to locate, so add @transid for
trace_btrfs_qgroup_account_extent() for such debug.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Origin trace_qgroup_update_counters() only records qgroup id and its
reference count change.
It's good enough to debug qgroup accounting change, but when rescan race
is involved, it's pretty hard to distinguish which modification belongs
to which rescan.
So add old_rfer and old_excl trace output to help distinguishing
different rescan instance.
(Different rescan instance should reset its qgroup->rfer to 0)
For trace event parameter, it just changes from u64 qgroup_id to struct
btrfs_qgroup *qgroup, so number of parameters is not changed at all.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike previous method that tries to commit transaction inside
qgroup_reserve(), this time we will try to commit transaction using
fs_info->transaction_kthread to avoid nested transaction and no need to
worry about locking context.
Since it's an asynchronous function call and we won't wait for
transaction commit, unlike previous method, we must call it before we
hit the qgroup limit.
So this patch will use the ratio and size of qgroup meta_pertrans
reservation as indicator to check if we should trigger a transaction
commit. (meta_prealloc won't be cleaned in transaction committ, it's
useless anyway)
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
We have several reports about node pointer points to incorrect child
tree blocks, which could have even wrong owner and level but still with
valid generation and checksum.
Although btrfs check could handle it and print error message like:
leaf parent key incorrect 60670574592
Kernel doesn't have enough check on this type of corruption correctly.
At least add such check to read_tree_block() and btrfs_read_buffer(),
where we need two new parameters @level and @first_key to verify the
child tree block.
The new @level check is mandatory and all call sites are already
modified to extract expected level from its call chain.
While @first_key is optional, the following call sites are skipping such
check:
1) Root node/leaf
As ROOT_ITEM doesn't contain the first key, skip @first_key check.
2) Direct backref
Only parent bytenr and level is known and we need to resolve the key
all by ourselves, skip @first_key check.
Another note of this verification is, it needs extra info from nodeptr
or ROOT_ITEM, so it can't fit into current tree-checker framework, which
is limited to node/leaf boundary.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a nice helper to do proper casting of a qgroup to a ulist aux
value. And several places that could make use of it.
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 48a89bc4f2.
The idea to commit transaction and free some space after hitting qgroup
limit is good, although the problem is it can easily cause deadlocks.
One deadlock example is caused by trying to flush data while still
holding it:
Call Trace:
__schedule+0x49d/0x10f0
schedule+0xc6/0x290
schedule_timeout+0x187/0x1c0
wait_for_completion+0x204/0x3a0
btrfs_wait_ordered_extents+0xa40/0xaf0 [btrfs]
qgroup_reserve+0x913/0xa10 [btrfs]
btrfs_qgroup_reserve_data+0x3ef/0x580 [btrfs]
btrfs_check_data_free_space+0x96/0xd0 [btrfs]
__btrfs_buffered_write+0x3ac/0xd40 [btrfs]
btrfs_file_write_iter+0x62a/0xba0 [btrfs]
__vfs_write+0x320/0x430
vfs_write+0x107/0x270
SyS_write+0xbf/0x150
do_syscall_64+0x1b0/0x3d0
entry_SYSCALL64_slow_path+0x25/0x25
Another can be caused by trying to commit one transaction while nesting
with trans handle held by ourselves:
btrfs_start_transaction()
|- btrfs_qgroup_reserve_meta_pertrans()
|- qgroup_reserve()
|- btrfs_join_transaction()
|- btrfs_commit_transaction()
The retry is causing more problems than exppected when limit is enabled.
At least a graceful EDQUOT is way better than deadlock.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now trace_qgroup_meta_reserve() will have extra type parameter.
And introduce two new trace events:
1) trace_qgroup_meta_free_all_pertrans()
For btrfs_qgroup_free_meta_all_pertrans()
2) trace_qgroup_meta_convert()
For btrfs_qgroup_convert_reserved_meta()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For quota disabled->enable case, it's possible that at reservation time
quota was not enabled so no bytes were really reserved, while at release
time, quota was enabled so we will try to release some bytes we didn't
really own.
Such situation can cause metadata reserveation underflow, for both types,
also less possible for per-trans type since quota enable will commit
transaction.
To address this, record qgroup meta reserved bytes into
root::qgroup_meta_rsv_pertrans and ::prealloc.
So at releasing time we won't free any bytes we didn't reserve.
For DATA, it's already handled by io_tree, so nothing needs to be done
there.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For meta_prealloc reservation users, after btrfs_join_transaction()
caller will modify tree so part (or even all) meta_prealloc reservation
should be converted to meta_pertrans until transaction commit time.
This patch introduces a new function,
btrfs_qgroup_convert_reserved_meta() to do this for META_PREALLOC
reservation user.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since qgroup has seperate metadata reservation types now, we can
completely get rid of the old root->qgroup_meta_rsv, which mostly acts
as current META_PERTRANS reservation type.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs uses 2 different methods to reseve metadata qgroup space.
1) Reserve at btrfs_start_transaction() time
This is quite straightforward, caller will use the trans handler
allocated to modify b-trees.
In this case, reserved metadata should be kept until qgroup numbers
are updated.
2) Reserve by using block_rsv first, and later btrfs_join_transaction()
This is more complicated, caller will reserve space using block_rsv
first, and then later call btrfs_join_transaction() to get a trans
handle.
In this case, before we modify trees, the reserved space can be
modified on demand, and after btrfs_join_transaction(), such reserved
space should also be kept until qgroup numbers are updated.
Since these two types behave differently, split the original "META"
reservation type into 2 sub-types:
META_PERTRANS:
For above case 1)
META_PREALLOC:
For reservations that happened before btrfs_join_transaction() of
case 2)
NOTE: This patch will only convert existing qgroup meta reservation
callers according to its situation, not ensuring all callers are at
correct timing.
Such fix will be added in later patches.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
When modifying qgroup relationship, for qgroup which only owns exclusive
extents, we will go through quick update path.
In this path, we will add/subtract exclusive and reference number for
parent qgroup, since the source (child) qgroup only has exclusive
extents, destination (parent) qgroup will also own or lose those extents
exclusively.
The same should be the same for reservation, since later reservation
adding/releasing will also affect parent qgroup, without the reservation
carried from child, parent will underflow reservation or have dead
reservation which will never be freed.
However original code doesn't do the same thing for reservation.
It handles qgroup reservation quite differently:
It removes qgroup reservation, as it's allocating space from the
reserved qgroup for relationship adding.
But does nothing for qgroup reservation if we're removing a qgroup
relationship.
According to the original code, it looks just like because we're adding
qgroup->rfer, the code assumes we're writing new data, so it's follows
the normal write routine, by reducing qgroup->reserved and adding
qgroup->rfer/excl.
This old behavior is wrong, and should be fixed to follow the same
excl/rfer behavior.
Just fix it by using the correct behavior described above.
Fixes: 31193213f1 ("Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since most callers of qgroup_reserve() are already defined by type,
converting qgroup_reserve() is quite an easy work.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce helpers to:
1) Get total reserved space
For limit calculation
2) Add/release reserved space for given type
With underflow detection and warning
3) Add/release reserved space according to child qgroup
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of single qgroup->reserved, use a new structure btrfs_qgroup_rsv
to store different types of reservation.
This patch only updates the header needed to compile.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_run_qgroups is doing a bit too much. Not only is it
responsible for synchronizing in-memory state of qgroups to disk but
it also contains code to trigger the initial qgroup rescan when
quota is enabled initially. This condition is detected by checking that
BTRFS_FS_QUOTA_ENABLED is not set and BTRFS_FS_QUOTA_ENABLING is set.
Nothing really requires from the code to be structured (and scattered)
the way it is so let's streamline things. First move the quota rescan
code into btrfs_quota_enable, where its invocation is closer to the
use. This also makes the FS_QUOTA_ENABLING flag redundant so let's
remove it as well.
This has been tested with a full xfstest run with qgroups enabled on
the scratch device of every xfstest and no regressions were observed.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Running generic/019 with qgroups on the scratch device enabled is almost
guaranteed to trigger the BUG_ON in btrfs_free_tree_block. It's supposed
to trigger only on -ENOMEM, in reality, however, it's possible to get
-EIO from btrfs_qgroup_trace_extent_post. This function just finds the
roots of the extent being tracked and sets the qrecord->old_roots list.
If this operation fails nothing critical happens except the quota
accounting can be considered wrong. In such case just set the
INCONSISTENT flag for the quota and print a warning, rather than killing
off the system. Additionally, it's possible to trigger a BUG_ON in
btrfs_truncate_inode_items as well.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ error message adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
All callers use GFP_NOFS, we don't have to pass it as an argument. The
built-in tests pass GFP_KERNEL, but they run only at module load time
and NOFS works there as well.
Signed-off-by: David Sterba <dsterba@suse.com>
The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and
offset (encoded as a single logical address) to a list of extent refs.
LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping
(extent ref -> extent bytenr and offset, or logical address). These are
useful capabilities for programs that manipulate extents and extent
references from userspace (e.g. dedup and defrag utilities).
When the extents are uncompressed (and not encrypted and not other),
check_extent_in_eb performs filtering of the extent refs to remove any
extent refs which do not contain the same extent offset as the 'logical'
parameter's extent offset. This prevents LOGICAL_INO from returning
references to more than a single block.
To find the set of extent references to an uncompressed extent from [a, b),
userspace has to run a loop like this pseudocode:
for (i = a; i < b; ++i)
extent_ref_set += LOGICAL_INO(i);
At each iteration of the loop (up to 32768 iterations for a 128M extent),
data we are interested in is collected in the kernel, then deleted by
the filter in check_extent_in_eb.
When the extents are compressed (or encrypted or other), the 'logical'
parameter must be an extent bytenr (the 'a' parameter in the loop).
No filtering by extent offset is done (or possible?) so the result is
the complete set of extent refs for the entire extent. This removes
the need for the loop, since we get all the extent refs in one call.
Add an 'ignore_offset' argument to iterate_inodes_from_logical,
[...several levels of function call graph...], and check_extent_in_eb, so
that we can disable the extent offset filtering for uncompressed extents.
This flag can be set by an improved version of the LOGICAL_INO ioctl to
get either behavior as desired.
There is no functional change in this patch. The new flag is always
false.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor coding style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Previously, we were calling del_qgroup_item, and ignoring the return code
resulting in a potential to have divergent in-memory state without an
error. Perhaps, it makes sense to handle this error code, and put the
filesystem into a read only, or similar state.
This patch only adds reporting of the error if the error is fatal,
(any error other than qgroup not found).
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, "btrfs quota enable" would fail after "btrfs quota disable" on
the first time with syslog output "qgroup_rescan_init failed with -22", but
it would succeed on the second time.
When "quota disable" is called, BTRFS_FS_QUOTA_DISABLING flag bit will be
set in fs_info->flags in btrfs_quota_disable(), but it will not be droppd
in btrfs_run_qgroups() (which is called in btrfs_commit_transaction())
because quota_root has already been freed. If "quota enable" is called
after that, both BTRFS_FS_QUOTA_DISABLING and BTRFS_FS_QUOTA_ENABLED flag
would be dropped in the btrfs_run_qgroups() since quota_root is not NULL.
This leads to the failure of "quota enable" on the first time.
BTRFS_FS_QUOTA_DISABLING flag is not used outside of "quota disable"
context and is equivalent to whether quota_root is NULL or not.
btrfs_run_qgroups() checks whether quota_root is NULL or not in the first
place.
So, let's remove BTRFS_FS_QUOTA_DISABLING flag.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers append "\n" so we can keep the actual strings shorter. The
extra newline will print an empty line. Some messages have been
slightly modified to be more consistent with the rest (lowercase first
letter).
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current code was erroneously checking for
root_level > BTRFS_MAX_LEVEL. If we had a root_level of 8 then the check
won't trigger and we could potentially hit a buffer overflow. The
correct check should be root_level >= BTRFS_MAX_LEVEL .
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dave Jones hit a WARN_ON(nr < 0) in btrfs_wait_ordered_roots() with
v4.12-rc6. This was because commit 70e7af244 made it possible for
calc_reclaim_items_nr() to return a negative number. It's not really a
bug in that commit, it just didn't go far enough down the stack to find
all the possible 64->32 bit overflows.
This switches calc_reclaim_items_nr() to return a u64 and changes everyone
that uses the results of that math to u64 as well.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 70e7af2 ("Btrfs: fix delalloc accounting leak caused by u32 overflow")
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For the following case, btrfs can underflow qgroup reserved space
at an error path:
(Page size 4K, function name without "btrfs_" prefix)
Task A | Task B
----------------------------------------------------------------------
Buffered_write [0, 2K) |
|- check_data_free_space() |
| |- qgroup_reserve_data() |
| Range aligned to page |
| range [0, 4K) <<< |
| 4K bytes reserved <<< |
|- copy pages to page cache |
| Buffered_write [2K, 4K)
| |- check_data_free_space()
| | |- qgroup_reserved_data()
| | Range alinged to page
| | range [0, 4K)
| | Already reserved by A <<<
| | 0 bytes reserved <<<
| |- delalloc_reserve_metadata()
| | And it *FAILED* (Maybe EQUOTA)
| |- free_reserved_data_space()
|- qgroup_free_data()
Range aligned to page range
[0, 4K)
Freeing 4K
(Special thanks to Chandan for the detailed report and analyse)
[CAUSE]
Above Task B is freeing reserved data range [0, 4K) which is actually
reserved by Task A.
And at writeback time, page dirty by Task A will go through writeback
routine, which will free 4K reserved data space at file extent insert
time, causing the qgroup underflow.
[FIX]
For btrfs_qgroup_free_data(), add @reserved parameter to only free
data ranges reserved by previous btrfs_qgroup_reserve_data().
So in above case, Task B will try to free 0 byte, so no underflow.
Reported-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new parameter, struct extent_changeset for
btrfs_qgroup_reserved_data() and its callers.
Such extent_changeset was used in btrfs_qgroup_reserve_data() to record
which range it reserved in current reserve, so it can free it in error
paths.
The reason we need to export it to callers is, at buffered write error
path, without knowing what exactly which range we reserved in current
allocation, we can free space which is not reserved by us.
This will lead to qgroup reserved space underflow.
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_qgroup_release/free_data() only returns 0 or a negative error
number (ENOMEM is the only possible error).
This is normally good enough, but sometimes we need the exact byte
count it freed/released.
Change it to return actually released/freed bytenr number instead of 0
for success.
And slightly modify related extent_changeset structure, since in btrfs
one no-hole data extent won't be larger than 128M, so "unsigned int"
is large enough for the use case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Quite a lot of qgroup corruption happens due to wrong time of calling
btrfs_qgroup_prepare_account_extents().
Since the safest time is to call it just before
btrfs_qgroup_account_extents(), there is no need to separate these 2
functions.
Merging them will make code cleaner and less bug prone.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ changelog and comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Modify btrfs_qgroup_account_extent() to exit quicker for non-fs extents.
The quick exit condition is:
1) The extent belongs to a non-fs tree
Only fs-tree extents can affect qgroup numbers and is the only case
where extent can be shared between different trees.
Although strictly speaking extent in data-reloc or tree-reloc tree
can be shared, data/tree-reloc root won't appear in the result of
btrfs_find_all_roots(), so we can ignore such case.
So we can check the first root in old_roots/new_roots ulist.
- if we find the 1st root is a not a fs/subvol root, then we can skip
the extent
- if we find the 1st root is a fs/subvol root, then we must continue
calculation
OR
2) both 'nr_old_roots' and 'nr_new_roots' are 0
This means either such extent got allocated then freed in current
transaction or it's a new reloc tree extent, whose nr_new_roots is 0.
Either way it won't affect qgroup accounting and can be skipped
safely.
Such quick exit can make trace output more quite and less confusing:
(example with fs uuid and time stamp removed)
Before:
------
add_delayed_tree_ref: bytenr=29556736 num_bytes=16384 action=ADD_DELAYED_REF parent=0(-) ref_root=2(EXTENT_TREE) level=0 type=TREE_BLOCK_REF seq=0
btrfs_qgroup_account_extent: bytenr=29556736 num_bytes=16384 nr_old_roots=0 nr_new_roots=1
------
Extent tree block will trigger btrfs_qgroup_account_extent() trace point
while no qgroup number is changed, as extent tree won't affect qgroup
accounting.
After:
------
add_delayed_tree_ref: bytenr=29556736 num_bytes=16384 action=ADD_DELAYED_REF parent=0(-) ref_root=2(EXTENT_TREE) level=0 type=TREE_BLOCK_REF seq=0
------
Now such unrelated extent won't trigger btrfs_qgroup_account_extent()
trace point, making the trace less noisy.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ changelog and comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
On an uncontended system, we can end up hitting soft lockups while
doing replace_path. At the core, and frequently called is
btrfs_qgroup_trace_leaf_items, so it makes sense to add a cond_resched
there.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces the quota override flag to btrfs_fs_info, and a
change to quota limit checking code to temporarily allow for quota to be
overridden for processes with CAP_SYS_RESOURCE.
It's useful for administrative programs, such as log rotation, that may
need to temporarily use more disk space in order to free up a greater
amount of overall disk space without yielding more disk space to the
rest of userland.
Eventually, we may want to add the idea of an operator-specific quota,
operator reserved space, or something else to allow for administrative
override, but this is perhaps the simplest solution.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor changelog edits ]
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from Chris Mason:
"This has fixes and cleanups Dave Sterba collected for the merge
window.
The biggest functional fixes are between btrfs raid5/6 and scrub, and
raid5/6 and device replacement. Some of our pending qgroup fixes are
included as well while I bash on the rest in testing.
We also have the usual set of cleanups, including one that makes
__btrfs_map_block() much more maintainable, and conversions from
atomic_t to refcount_t"
* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (71 commits)
btrfs: fix the gfp_mask for the reada_zones radix tree
Btrfs: fix reported number of inode blocks
Btrfs: send, fix file hole not being preserved due to inline extent
Btrfs: fix extent map leak during fallocate error path
Btrfs: fix incorrect space accounting after failure to insert inline extent
Btrfs: fix invalid attempt to free reserved space on failure to cow range
btrfs: Handle delalloc error correctly to avoid ordered extent hang
btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
btrfs: check if the device is flush capable
btrfs: delete unused member nobarriers
btrfs: scrub: Fix RAID56 recovery race condition
btrfs: scrub: Introduce full stripe lock for RAID56
btrfs: Use ktime_get_real_ts for root ctime
Btrfs: handle only applicable errors returned by btrfs_get_extent
btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
btrfs: use q which is already obtained from bdev_get_queue
Btrfs: switch to div64_u64 if with a u64 divisor
Btrfs: update scrub_parity to use u64 stripe_len
Btrfs: enable repair during read for raid56 profile
btrfs: use clear_page where appropriate
...
The WARN_ON and warning from report_reserved_underflow can become very
noisy and is visible unconditionally although this is namely for
debugging. The patch "btrfs: Add WARN_ON for qgroup reserved underflow"
(18dc22c19b) went to 4.11-rc1 and the plan
was to get the fix as well, but this hasn't happened.
CC: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Newly introduced qgroup reserved space trace points are normally nested
into several common qgroup operations.
While some other trace points are not well placed to co-operate with
them, causing confusing output.
This patch re-arrange trace_btrfs_qgroup_release_data() and
trace_btrfs_qgroup_free_delayed_ref() trace points so they are triggered
before reserved space ones.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce the following trace points:
qgroup_update_reserve
qgroup_meta_reserve
These trace points are handy to trace qgroup reserve space related
problems.
Also export btrfs_qgroup structure, as now we directly pass btrfs_qgroup
structure to trace points, so that structure needs to be exported.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are facing the same problem with EDQUOT which was experienced with
ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but
here is a quick fix, which may be too big a hammer.
Quotas are reserved during the start of an operation, incrementing
qg->reserved. However, it is written to disk in a commit_transaction
which could take as long as commit_interval. In the meantime there
could be deletions which are not accounted for because deletions are
accounted for only while committed (free_refroot). So, when we get
a EDQUOT flush the data to disk and try again.
This fixes fstests btrfs/139.
Here is a sample script which shows this issue.
DEVICE=/dev/vdb
MOUNTPOINT=/mnt
TESTVOL=$MOUNTPOINT/tmp
QUOTA=5
PROG=btrfs
DD_BS="4k"
DD_COUNT="256"
RUN_TIMES=5000
mkfs.btrfs -f $DEVICE
mount -o commit=240 $DEVICE $MOUNTPOINT
$PROG subvolume create $TESTVOL
$PROG quota enable $TESTVOL
$PROG qgroup limit ${QUOTA}G $TESTVOL
typeset -i DD_RUN_GOOD
typeset -i QUOTA
function _check_cmd() {
if [[ ${?} > 0 ]]; then
echo -n "$(date) E: Running previous command"
echo ${*}
echo "Without sync"
$PROG qgroup show -pcreFf ${TESTVOL}
echo "With sync"
$PROG qgroup show -pcreFf --sync ${TESTVOL}
exit 1
fi
}
while true; do
DD_RUN_GOOD=$RUN_TIMES
while (( ${DD_RUN_GOOD} != 0 )); do
dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}
_check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}"
DD_RUN_GOOD=(${DD_RUN_GOOD}-1)
done
$PROG qgroup show -pcref $TESTVOL
echo "----------- Cleanup ---------- "
rm $TESTVOL/quotatest*
done
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Define the SEQ_LAST macro to replace (u64)-1 in places where said
value triggers a special-case ref search behavior.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The members have been effectively unused since "Btrfs: rework qgroup
accounting" (fcebe4562d), there's no substitute for
assert_qgroups_uptodate so it's removed as well.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using an int value is causing qg->reserved to become negative and
exclusive -EDQUOT to be reached prematurely.
This affects exclusive qgroups only.
TEST CASE:
DEVICE=/dev/vdb
MOUNTPOINT=/mnt
SUBVOL=$MOUNTPOINT/tmp
umount $SUBVOL
umount $MOUNTPOINT
mkfs.btrfs -f $DEVICE
mount /dev/vdb $MOUNTPOINT
btrfs quota enable $MOUNTPOINT
btrfs subvol create $SUBVOL
umount $MOUNTPOINT
mount /dev/vdb $MOUNTPOINT
mount -o subvol=tmp $DEVICE $SUBVOL
btrfs qgroup limit -e 3G $SUBVOL
btrfs quota rescan /mnt -w
for i in `seq 1 44000`; do
dd if=/dev/zero of=/mnt/tmp/test_$i bs=10k count=1
if [[ $? > 0 ]]; then
btrfs qgroup show -pcref $SUBVOL
exit 1
fi
done
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[ add reproducer to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Just as Filipe pointed out, the most time consuming parts of qgroup are
btrfs_qgroup_account_extents() and
btrfs_qgroup_prepare_account_extents().
Which both call btrfs_find_all_roots() to get old_roots and new_roots
ulist.
What makes things worse is, we're calling that expensive
btrfs_find_all_roots() at transaction committing time with
TRANS_STATE_COMMIT_DOING, which will blocks all incoming transaction.
Such behavior is necessary for @new_roots search as current
btrfs_find_all_roots() can't do it correctly so we do call it just
before switch commit roots.
However for @old_roots search, it's not necessary as such search is
based on commit_root, so it will always be correct and we can move it
out of transaction committing.
This patch moves the @old_roots search part out of
commit_transaction(), so in theory we can half the time qgroup time
consumption at commit_transaction().
But please note that, this won't speedup qgroup overall, the total time
consumption is still the same, just reduce the performance stall.
Cc: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change the name so it matches the naming we already use eg. for
btrfs_path.
Suggested-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There was never need for RCU protection around reading nodesize or other
fairly constant filesystem data.
Signed-off-by: David Sterba <dsterba@suse.com>
Status of quotas should be the first check in
btrfs_qgroup_account_extent and we can return immediatelly, no need to
do no-op ulist frees.
Signed-off-by: David Sterba <dsterba@suse.com>
We can embed range_changed to the extent changeset to address following
problems:
- no need to allocate ulist dynamically, we also get rid of the GFP_NOFS
for free
- fix lack of allocation failure checking in btrfs_qgroup_reserve_data
The stack consuption where extent_changeset is used slightly increases:
before: 16
after: 16 - 8 (for pointer) + 32 (sizeof ulist) = 40
Which is bearable.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qgroup relations are added/deleted from ioctl, we hold the high level
qgroup lock, no deadlocks or recursion from the allocation possible
here.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use GFP_NOFS here as this is called from ioctls an the
only lock held is the subvol_sem, which is of a high level and protects
creation/renames/deletion and is never held in the writeout paths.
Signed-off-by: David Sterba <dsterba@suse.com>
Once a qgroup limit is exceeded, it's impossible to restore normal
operation to the subvolume without modifying the limit or removing
the subvolume. This is a surprising situation for many users used
to the typical workflow with quotas on other file systems where it's
possible to remove files until the used space is back under the limit.
When we go to unlink a file and start the transaction, we'll hit
the qgroup limit while trying to reserve space for the items we'll
modify while removing the file. We discussed last month how best
to handle this situation and agreed that there is no perfect solution.
The best principle-of-least-surprise solution is to handle it similarly
to how we already handle ENOSPC when unlinking, which is to allow
the operation to succeed with the expectation that it will ultimately
release space under most circumstances.
This patch modifies the transaction start path to select whether to
honor the qgroups limits. btrfs_start_transaction_fallback_global_rsv
is the only caller that skips enforcement. The reservation and tracking
still happens normally -- it just skips the enforcement step.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues has exposed and fixed a bug which underflows btrfs
qgroup reserved space, and leads to non-writable fs.
This reminds us that we don't have enough underflow check for qgroup
reserved space.
For underflow case, we should not really underflow the numbers but warn
and keeps qgroup still work.
So add more check on qgroup reserved space and add WARN_ON() and
btrfs_warn() for any underflow case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Patches queued up by Filipe:
The most important change is still the fix for the extent tree
corruption that happens due to balance when qgroups are enabled (a
regression introduced in 4.7 by a fix for a regression from the last
qgroups rework). This has been hitting SLE and openSUSE users and QA
very badly, where transactions keep getting aborted when running
delayed references leaving the root filesystem in RO mode and nearly
unusable. There are fixes here that allow us to run xfstests again
with the integrity checker enabled, which has been impossible since 4.8
(apparently I'm the only one running xfstests with the integrity
checker enabled, which is useful to validate dirtied leafs, like
checking if there are keys out of order, etc). The rest are just some
trivial fixes, most of them tagged for stable, and two cleanups.
Signed-off-by: Chris Mason <clm@fb.com>
Now we only use the root parameter to print the root objectid in
a tracepoint. We can use the root parameter from the transaction
handle for that. It's also used to join the transaction with
async commits, so we remove the comment that it's just for checking.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are loads of functions in btrfs that accept a root parameter
but only use it to obtain an fs_info pointer. Let's convert those to
just accept an fs_info pointer directly.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In routines where someptr->fs_info is referenced multiple times, we
introduce a convenience variable. This makes the code considerably
more readable.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We track the node sizes per-root, but they never vary from the values
in the superblock. This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move account_shared_subtree() to qgroup.c and rename it to
btrfs_qgroup_trace_subtree().
Do the same thing for account_leaf_items() and rename it to
btrfs_qgroup_trace_leaf_items().
Since all these functions are only for qgroup, move them to qgroup.c and
export them is more appropriate.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename btrfs_qgroup_insert_dirty_extent(_nolock) to
btrfs_qgroup_trace_extent(_nolock), according to the new
reserve/trace/account naming schema.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers are not meant to be generic, the name is misleading. Convert
them to static inlines for type checking.
Signed-off-by: David Sterba <dsterba@suse.com>
We were setting the qgroup_rescan_running flag to true only after the
rescan worker started (which is a task run by a queue). So if a user
space task starts a rescan and immediately after asks to wait for the
rescan worker to finish, this second call might happen before the rescan
worker task starts running, in which case the rescan wait ioctl returns
immediatley, not waiting for the rescan worker to finish.
This was making the fstest btrfs/022 fail very often.
Fixes: d2c609b834 (btrfs: properly track when rescan worker is running)
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
For many printks, we want to know which file system issued the message.
This patch converts most pr_* calls to use the btrfs_* versions instead.
In some cases, this means adding plumbing to allow call sites access to
an fs_info pointer.
fs/btrfs/check-integrity.c is left alone for another day.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
CodingStyle chapter 2:
"[...] never break user-visible strings such as printk messages,
because that breaks the ability to grep for them."
This patch unsplits user-visible strings.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a lot of random ints in btrfs_fs_info that can be put into flags. This
is mostly equivalent with the exception of how we deal with quota going on or
off, now instead we set a flag when we are turning it on or off and deal with
that appropriately, rather than just having a pending state that the current
quota_enabled gets set to. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor btrfs_qgroup_insert_dirty_extent() function, to two functions:
1. btrfs_qgroup_insert_dirty_extent_nolock()
Almost the same with original code.
For delayed_ref usage, which has delayed refs locked.
Change the return value type to int, since caller never needs the
pointer, but only needs to know if they need to free the allocated
memory.
2. btrfs_qgroup_insert_dirty_extent()
The more encapsulated version.
Will do the delayed_refs lock, memory allocation, quota enabled check
and other things.
The original design is to keep exported functions to minimal, but since
more btrfs hacks exposed, like replacing path in balance, we need to
record dirty extents manually, so we have to add such functions.
Also, add comment for both functions, to info developers how to keep
qgroup correct when doing hacks.
Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We wait on qgroup rescan completion in three places: file system
shutdown, the quota disable ioctl, and the rescan wait ioctl. If the
user sends a signal while we're waiting, we continue happily along. This
is expected behavior for the rescan wait ioctl. It's racy in the shutdown
path but mostly works due to other unrelated synchronization points.
In the quota disable path, it Oopses the kernel pretty much immediately.
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The qgroup_flags field is overloaded such that it reflects the on-disk
status of qgroups and the runtime state. The BTRFS_QGROUP_STATUS_FLAG_RESCAN
flag is used to indicate that a rescan operation is in progress, but if
the file system is unmounted while a rescan is running, the rescan
operation is paused. If the file system is then mounted read-only,
the flag will still be present but the rescan operation will not have
been resumed. When we go to umount, btrfs_qgroup_wait_for_completion
will see the flag and interpret it to mean that the rescan worker is
still running and will wait for a completion that will never come.
This patch uses a separate flag to indicate when the worker is
running. The locking and state surrounding the qgroup rescan worker
needs a lot of attention beyond this patch but this is enough to
avoid a hung umount.
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by; Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_trans_handle->root is documented as for use for confirming
that the root passed in to start the transaction is the same as the
one ending it. It's used in several places when an fs_info pointer
is needed, so let's just add an fs_info pointer directly. Eventually,
the root pointer can be removed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
