Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move macro definitions from source file into respective header file
This concludes macro cleanup as outlined in TODO
Signed-off-by: Dmytro Shynkevych <dm.shynk@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following warnings:
Block comments should align the * on each line
Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the skein_base.c file that fixes up a
comment aligning warning found by the checkpatch.pl tool at line 2
Signed-off-by: Tobias Heineken <tobias.heineken+kernel@robotics-erlangen.de>
Signed-off-by: Florian Schleicher <florian.schleicher@fau.de>
CC: linux-kernel@i4.cs.fau.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make suggested checkpatch modification for
CHECK: Please don't use multiple blank lines
Acked-by: Jason Cooper <jason@lakedaemon.net
Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some type conversions like casting a pointer to a pointer of same type,
casting to the original type using addressof(&) operator etc. are not
needed. Therefore, remove them. Done using coccinelle:
@@
type t;
t *p;
t a;
@@
(
- (t)(a)
+ a
|
- (t *)(p)
+ p
|
- (t *)(&a)
+ &a
)
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
added operator white space and parentheses for readability
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added lines between functions in skein_block.c and removed unneeded
lines in skein_block.c
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aligned parentheses to conform to the coding style.
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added white space between operators and operands. Because this sometimes
maxed out the column width, some expressions were broken up into multiple
lines, and comments were moved appropriately.
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the local inline and use the generic kernel rol64 instead.
Miscellanea:
o Added a newline between a multiple line macro for consistency
with the other multiple line macros
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the inline instead of direct code to improve readability
and shorten the code a little.
Done with perl:
$ perl -p -i -e 's/\((\w+) \>\> (\d+)\) \| \(\1 \<\< \(64 \- \2\)\)/ror64(\1, \2)/g' drivers/staging/skein/threefish_block.c
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the inline instead of direct code to improve readability
and shorten the code a little.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add space around operator '%'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '%' (ctx:VxV)
Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove intialisation of a variable that is immediately reassigned.
The semantic patch used to find this is:
// <smpl>
@@
type T;
identifier x;
constant C;
expression e;
@@
T x
- = C
;
x = e;
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Problem found using checkpatch.pl
CHECK: Comparison to NULL could be written "key"
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary space after cast. Problem found using checkpatch.pl
CHECK: No space is necessary after a cast.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a separate line for the opening marker of a comment block,
a leading asterisk in front of subsequent lines in the block comment,
and a separate line for the closing marker of the comment block.
This patch fixes the checkpatch.pl warnings:
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
WARNING: Block comments use * on subsequent lines
+/*
+Copyright (c) 2010 Werner Dittmann
Signed-off-by: Amber N. Adams <amber@amberadams.co>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a few spelling errors in comments.
Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WARNING: Single statement macros should not use a do {} while (0) loop
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix warnings:
drivers/staging/skein/skein_base.h:89:30: warning: shift too big (50) for type int
...
drivers/staging/skein/skein_base.h:89:30: warning: shift too big (39)for type int
drivers/staging/skein/skein_base.h:89:19: warning: too many warnings
Signed-off-by: Domagoj Trsan <domagoj.trsan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/skein/skein_generic.c:30:5: warning: symbol 'skein256_update' was not declared. Should it be static?
drivers/staging/skein/skein_generic.c:65:5: warning: symbol 'skein512_update' was not declared. Should it be static?
drivers/staging/skein/skein_generic.c💯5: warning: symbol 'skein1024_update' was not declared. Should it be static?
Signed-off-by: Niklas Svensson <nks@flawful.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes skein_debug.h include since skein_debug.h is nonexistent.
Removes unneeded debug empty macro defines and their uses.
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mikael Svantesson <mikael@distopic.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes unneeded #define SKEIN_PORT_CODE since skein_port.h is
nonexistent.
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inlines the rotl_64 macro.
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds loadable module support to the Skein Hashing Algorithm driver.
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds CryptoAPI support to the Skein Hashing Algorithm driver.
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renames skein.c to skein_base.c and skein.h to skein_base.h in
preparation for naming loadable module skein.ko
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Collapses threefish module into skein module.
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorganizes file to remove #defines from middle of functions. Also
removes #if'd loop declarations and adds ternary if driven loops.
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pretties up multiline #defines and many other whitespace issues
Signed-off-by: Eric Rost <eric.rost@mybabylon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the error and warning:
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
Signed-off-by: Blaj Roxana <roxanagabriela10@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following sparse warnings:
skein_iv.h:23:11: warning: symbol 'SKEIN_256_IV_128' was not declared. Should it be static?
skein_iv.h:31:11: warning: symbol 'SKEIN_256_IV_160' was not declared. Should it be static?
skein_iv.h:39:11: warning: symbol 'SKEIN_256_IV_224' was not declared. Should it be static?
skein_iv.h:47:11: warning: symbol 'SKEIN_256_IV_256' was not declared. Should it be static?
skein_iv.h:55:11: warning: symbol 'SKEIN_512_IV_128' was not declared. Should it be static?
skein_iv.h:67:11: warning: symbol 'SKEIN_512_IV_160' was not declared. Should it be static?
skein_iv.h:79:11: warning: symbol 'SKEIN_512_IV_224' was not declared. Should it be static?
skein_iv.h:91:11: warning: symbol 'SKEIN_512_IV_256' was not declared. Should it be static?
skein_iv.h:103:11: warning: symbol 'SKEIN_512_IV_384' was not declared. Should it be static?
skein_iv.h:115:11: warning: symbol 'SKEIN_512_IV_512' was not declared. Should it be static?
skein_iv.h:127:11: warning: symbol 'SKEIN_1024_IV_384' was not declared. Should it be static?
skein_iv.h:147:11: warning: symbol 'SKEIN_1024_IV_512' was not declared. Should it be static?
skein_iv.h:167:11: warning: symbol 'SKEIN_1024_IV_1024' was not declared. Should it be static?
by declaring the initialization vectors in question as static. The header
skein_iv.h is only included by skein.c
Signed-off-by: James A Shackleford <shack@linux.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following sparse warnings:
skein_block.c:43:6: warning: symbol 'skein_256_process_block' was not declared. Should it be static?
skein_block.c:252:6: warning: symbol 'skein_512_process_block' was not declared. Should it be static?
skein_block.c:483:6: warning: symbol 'skein_1024_process_block' was not declared. Should it be static?
by including the header skein_block.h, which contains the declarations in
question.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename a few more variables and structure member names to lower case.
Signed-off-by: Jake Edge <jake@lwn.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
move all threefish block functions to one file, remove unneeded include
Signed-off-by: Jake Edge <jake@lwn.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up file names and locations. Get rid of include/ directory and move
those up to the top-level. Rename files to get rid of upper case. Remove
skeinBlockNo3F.c as it was unused (temporary file or something?).
Signed-off-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mixing upper and lower case in names of macros like It_Is_Macro is
not accepted in the Linux Kernel. To prepare skein driver for mainline
inclusion, we rename all macros to uppercase or lowercase names.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux Kernel use capitalized names for enum. To prepare skein
driver to mainline inclusion, we rename all enums to capitalized
names.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code have skein_512_ctx and skein_256_ctx but skein1024_ctx.
It would be logical to convert these names to a single form.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
