no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's possible the migration file is accessed after reset when it has
been cleaned up, especially when it's initiated by the device. This is
because the driver doesn't rip out the filep when cleaning up it only
frees the related page structures and sets its local struct
pds_vfio_lm_file pointer to NULL. This can cause a NULL pointer
dereference, which is shown in the example below during a restore after
a device initiated reset:
BUG: kernel NULL pointer dereference, address: 000000000000000c
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:pds_vfio_get_file_page+0x5d/0xf0 [pds_vfio_pci]
[...]
Call Trace:
<TASK>
pds_vfio_restore_write+0xf6/0x160 [pds_vfio_pci]
vfs_write+0xc9/0x3f0
? __fget_light+0xc9/0x110
ksys_write+0xb5/0xf0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
Add a disabled flag to the driver's struct pds_vfio_lm_file that gets
set during cleanup. Then make sure to check the flag when the migration
file is accessed via its file_operations. By default this flag will be
false as the memory for struct pds_vfio_lm_file is kzalloc'd, which means
the struct pds_vfio_lm_file is enabled and accessible. Also, since the
file_operations and driver's migration file cleanup happen under the
protection of the same pds_vfio_lm_file.lock, using this flag is thread
safe.
Fixes: 8512ed2563 ("vfio/pds: Always clear the save/restore FDs on reset")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20240308182149.22036-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
anon_inode_getfile() never returns NULL pointer, it will return
ERR_PTR() when it fails, so replace the check with IS_ERR().
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20230819023716.3469037-1-yangyingliang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_and_clear.
All of the tracker resources are allocated and dirty tracking on the
device is started during log_start. The resources are cleaned up and
dirty tracking on the device is stopped during log_stop. The dirty
pages are determined and reported during log_read_and_clear.
In order to support these callbacks admin queue commands are used.
All of the adminq queue command structures and implementations
are included as part of this patch.
PDS_LM_CMD_DIRTY_STATUS is added to query the current status of
dirty tracking on the device. This includes if it's enabled (i.e.
number of regions being tracked from the device's perspective) and
the maximum number of regions supported from the device's perspective.
PDS_LM_CMD_DIRTY_ENABLE is added to enable dirty tracking on the
specified number of regions and their iova ranges.
PDS_LM_CMD_DIRTY_DISABLE is added to disable dirty tracking for all
regions on the device.
PDS_LM_CMD_READ_SEQ and PDS_LM_CMD_DIRTY_WRITE_ACK are added to
support reading and acknowledging the currently dirtied pages.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-7-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's adminq for device configuration.
The ability to suspend, resume, and transfer VF device state data is
included along with the required admin queue command structures and
implementations.
PDS_LM_CMD_SUSPEND and PDS_LM_CMD_SUSPEND_STATUS are added to support
the VF device suspend operation.
PDS_LM_CMD_RESUME is added to support the VF device resume operation.
PDS_LM_CMD_STATE_SIZE is added to determine the exact size of the VF
device state data.
PDS_LM_CMD_SAVE is added to get the VF device state data.
PDS_LM_CMD_RESTORE is added to restore the VF device with the
previously saved data from PDS_LM_CMD_SAVE.
PDS_LM_CMD_HOST_VF_STATUS is added to notify the DSC/firmware when
a migration is in/not-in progress from the host's perspective. The
DSC/firmware can use this to clear/setup any necessary state related
to a migration.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-6-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
