Commit Graph

482 Commits

Author SHA1 Message Date
Alison Schofield
d7203ad864 iio: adc: ad7791: claim direct mode when writing frequency
Driver was checking for direct mode and trying to lock it, but
left a gap where mode could change before the desired operation.
Use iio_device_claim_direct_mode() to guarantee device stays in
direct mode.

Refactor function to clarify look-up followed by lock sequence.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-03 13:12:50 +01:00
Alison Schofield
afa814841c iio: adc: ad7793: claim direct mode when writing frequency
Driver was checking for direct mode and trying to lock it, but
left a gap where mode could change before the desired operation.
Use iio_device_claim_direct_mode() to guarantee device stays in
direct mode.

Refactor function to clarify look-up followed by lock sequence.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-03 13:01:14 +01:00
Alison Schofield
1bb86ecb6c iio: adc: ad799x: use iio helper function to guarantee direct mode
Replace the code that guarantees the device stays in direct mode
with iio_device_claim_direct_mode() which does same.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 19:38:31 +01:00
Alison Schofield
9f57e068e0 iio: adc: ad7923: use iio helper function to guarantee direct mode
Replace the code that guarantees the device stays in direct mode
with iio_device_claim_direct_mode() which does same.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 19:36:59 +01:00
Alison Schofield
6fea8a426b iio: adc: ad7887: use iio helper function to guarantee direct mode
Replace the code that guarantees the device stays in direct mode
with iio_device_claim_direct_mode() which does same.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 19:36:01 +01:00
Alison Schofield
a52f238e7c iio: adc: ad7476: use iio helper function to guarantee direct mode
Replace the code that guarantees the device stays in direct mode
with iio_device_claim_direct_mode() which does same.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 19:34:40 +01:00
Alison Schofield
c70df20e31 iio: adc: ad7266: claim direct mode during sensor read
Driver was checking for direct mode but not locking it down.
Use iio_device_claim_direct_mode() to guarantee device stays
in direct mode.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 18:01:13 +01:00
Matt Ranostay
8ac8aa61f8 iio: adc: ti-ads1015: add datasheet names
Add datasheet names for ADC channels to allow iio consumers access.

Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-28 18:20:45 +01:00
Quentin Schulz
44072b2c8d iio: adc: nau7802: Expose possible gains in sysfs
The Nuvoton NAU7802 ADC is able to adjust its gain but prior knowledge of
its possible values was required to adjust it. Users had to guess the
possible gain values based on the ADC datasheet or on this driver's code.

This exposes the possible values in the in_voltage_scale_available file of
each nau7802 ADC device. The gain is set for the whole ADC and is therefore
not configurable by channel. Thus, there exists only one
in_voltage_scale_available file for each nau7802 ADC device even if it has
two separate channels.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-21 20:15:04 +01:00
Matt Ranostay
ba35f111aa iio: adc: ti-ads1015: add support for ADS1115 part
TI ADS1115 is a 16-bit resolution ADC that is register map
compatible with the ADS1015 device.

Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-21 17:49:27 +01:00
Stefan Wahren
331dd5be97 iio: mxs-lradc: disable only masked channels in mxs_lradc_hw_stop
Disabling of the touchscreen IRQs should be done in
mxs_lradc_disable_ts. So disable only the masked virtual channels
in mxs_lradc_hw_stop and finally remove the unused function
mxs_lradc_irq_en_mask.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04 10:44:28 +01:00
Stefan Wahren
962ed43a3e iio: mxs-lradc: remove mxs_lradc_ts_unregister
After using devm_input_allocate_device for registration
the function mxs_lradc_ts_unregister isn't necessary anymore
since mxs_lradc_ts_close already does the job.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04 10:44:27 +01:00
Stefan Wahren
a91e0b6de4 iio: mxs-lradc: simplify TS registration
This patch simplifies the TS registration of mxs-lradc by
using devm_input_allocate_device.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04 10:44:26 +01:00
Stefan Wahren
850c25c857 iio: mxs-lradc: move STMP reset out of ADC init
This patch moves the STMP reset out of ADC init function so as to remove
the possiblity of an error return which will be necessary for PM ops support
patches to follow.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19 19:58:10 +01:00
Stefan Wahren
9cf6fcc15a iio: mxs-lradc: move TS config into suitable function
This patch moves the touchscreen type configuration into
a more suitable function. Btw this simplifies PM ops later.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19 19:58:10 +01:00
Ksenija Stanojevic
922b3aa6e7 iio: adc: set INPUT_PROP_DIRECT
Set INPUT_PROP_DIRECT to indicate that it is a touchscreen on the
device to help userspace classify it.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-17 10:47:20 +01:00
Crestez Dan Leonard
08e05d1fce ti-adc081c: Initial triggered buffer support
Using this requires software triggers like CONFIG_IIO_HRTIMER_TRIGGER.

The device can be configured to do internal periodic sampling but does not
offer some sort of interrupt on data ready. Interrupts can only trigger when
values get out of a specific range.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-17 10:46:50 +01:00
Crestez Dan Leonard
a6b5ec887b ti-adc081c: Add support for adc101c and adc121c
These chips have an almost identical interface but support a different
number of value bits. Datasheet links for comparison:

 * http://www.ti.com/lit/ds/symlink/adc081c021.pdf
 * http://www.ti.com/lit/ds/symlink/adc101c021.pdf
 * http://www.ti.com/lit/ds/symlink/adc121c021.pdf

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-17 10:43:32 +01:00
Ksenija Stanojevic
aa0eb886be iio: adc: Indent if statement
Indent lines inside if statement.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-16 20:25:15 +01:00
Slawomir Stepien
102447adfa iio: adc: ad799x: remove space before comma
This fixes the error reported by checkpatch.pl:

ERROR: space prohibited before that ',' (ctx:WxW)

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-16 13:39:25 +01:00
Slawomir Stepien
4c79dd006b iio: adc: at91_adc: fix errors reported by checkpatch.pl
This fixes the errors reported by checkpatch.pl:

ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: code indent should use tabs where possible

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-16 13:39:24 +01:00
Slawomir Stepien
038a8b34d3 iio: adc: mcp3422: remove spaces before comma
This fixes the error reported by checkpatch.pl:

ERROR: space prohibited before that ',' (ctx:WxW)

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-16 13:39:23 +01:00
Slawomir Stepien
37dd441e4f iio: adc: vf610_adc: fix case label indent
This fixes the error reported by checkpatch.pl:

ERROR: switch and case should be at the same indent

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-16 13:39:23 +01:00
Greg Kroah-Hartman
eb7bfed901 First round of IIO new device support, features and cleanups for the 4.7 cycle.
New core support
 * UV light modifier (for intensity)
 * UV light index channel type.
 
 New device support
 * hp206c barometer and altimeter
   - new driver.
 * mcp4131 potentiometer
   - new driver supporting lots of parts from Microchip.
 * mma8452
   - FXLS8471Q support
 - NXP LPC18XX SOC ADC
   - new driver.
 - NXP LPC18XX SOC DAC
   - new driver.
 - rockchip_saradc
   - support rk3399
 * st accel
   - h3lis331dl support
 
 Staging driver removals
 * adis16204
   - obsolete part making it hard to get parts to test the driver in order
     to clean it up.
 * adis16220
   - obsolete part making it hard to get the parts test the driver in order
     to clean it up.
 
 Features
 * core
   - convenience functions to claim / release direct access to the device.
     Makes more consistent handling of this corner easier. Used in ad7192 driver.
 * ak8975
   - power regulator support.
 * at91-sama5d2
   - differential channel support.
 * mma8452
   - runtime pm support
   - drop device specific autosleep and use the runtime pm one instead.
 * ms5611
   - DT bindings
   - oversampling ratio support
 
 Cleanups and minor fixes
 * MAINTAINERS
   - Peter got married - hence name change!
 
 * Documentation
   - Fix a typo in in_proximity_raw description.
   - Add some missing docs for iio_buffer_access_funcs.
 
 * Tools
   - update iio_event_monitor names to match new stuff.
   - make generic_buffer look for triggers ending in -trigger as we let these in
   for a number of drivers a long time back and now it is a fairly common
   option.
 
 Drivers
 * staging wide
   - convert bare unsigned usage to unsigned int to comply with coding style.
 * non staging wide:
   - since boiler plate gpio handling of interrupts has been moved into the
    ACPI core we don't need to include gpio/consumer.h in a load of drivers so
    drop it.
 * ad7606
   - fix an endian casting sparse warning.
 * ak8975
   - fix a possible unitialized warning from gcc.
   - drop and unused field left over from earlier cleanups
   - fix a missing regulator_disable on exit.
 * at91-sama5d2
   - typo and indentation
   - missing IOMEM dependency.
   - cleanup mode register usage by avoidling erasing whole thing when changing
   the sampling frequency.
 * bmc150
   - use the core demux and available_scan_masks to simplify buffer handling
   - optimize the transfers in the trigger handler now we have a magic function
   to emulate bulk reads (under circumstances met here).  This matters with some
   rather dumb i2c adapters in particular.
   - use a single regmap_conf for all bus types as they were all the same.
 * bmg160
   - use the core demux and available_scan_masks to simplify the buffer handling
   - optimize the transfers in the trigger handler now we have a magic funciton
   to emulate bulk rads (under circumstances met here).
   - drop gpio interrupt probing from the driver (ACPI) as now handled by the
   ACPI core.
 * ina2xx-adc
   - update the CALIB register when RShunt changes.
   - fix scale for VShunt - in reality this error canceled out when used.
 * isl29028
   - use regmap to retrieve the struct device instead of carrying a second
   copy of it around.
 * kxcjk-1013
   - use core demux
   - optimize i2c transfers in the trigger handler.
 * mcp4531
   - refactor to use a pointer to access model parameters instead of indexing
     into the array each time.
 * mma8452
   - style fixes
   - avoid swtiching to active whenever the config changes
   - add missin i2c_device_id for mma8451
 * mpu6050
   - fix possible NULL dereference.
   - fix the name / chip_id used when ACPI used (otherwise reports as NULL).
 * ms5611
   - fix a missing regulator_disable that left the regulator on during removal.
 * mxc4005
   - drop gpio interrupt handling for ACPI case from driver as the core now
   handles this case.
 * st-sensors
   - note that there are only ever a maximum of 3 axis on current st-sensors
   so just allocate a fixed sized buffer big enough for that.
 * tpl0102
   - change the i2c_check_functionality condition to bring it inline with other
     IIO users as EOPNOTSUPP.
 * tsl2563
   - replace deprecated flush_scheduled_work
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXAYogAAoJEFSFNJnE9BaIhtsQAK9hsojCFC4EmcE0LdlC7A6r
 h/Any+ehurHSQIZmAZ1mn8QDBedf6Afpj+jl/qt/DADQk3e3u+TO1TbVHHUDB8Na
 ynvt1eibnUPAKxjbetUnPfOTaksp2GN8oScjPqk/3xmP1ip/uP3l2DM+jBOspW2K
 44UDpKE/aeulyCeG8wBHLY0ySuipQ8ZJyebETM3E94UrNdMHiuMyRA+SEbhcG+0T
 GyHYrlmPScFlk3xlhuYk7kS6gJQG0xg6u/qyuaBlQMKY1KXMGknU8sxSmqxRmCNn
 pJ3MeHZY6hFe3PNTgd30z+xbXN4JAifyUBHT2foRF86+f0BJSNIZJo/ynfCPli4z
 Rl+4M9NziYxw4V6osjKtPBquvk8UV6G/1tcgrr5pNFJor4dk6xRg/xCotYsqZuMX
 ypWOMuvkPQq+mqf68uJYlE++/A3xHP7aHdOlsXMgM8605KH1aSecbUP2dhRbHdRs
 u8XTt8Xj6uumQnxUnKjDZGIsDaxyw5JwarjhiNdJaCRgAgFw2qmNiFWYNkBaxxOt
 BheQBceoHLHDk/qTDsi0b5KDLqvArrbY8L6WBR+gW21isFpho5VDMgBSfNfdObGB
 nYaYTBcdx6sXm1SC1bMwVcgMnd3Bs4eWJRw79VFz/pFtTOc5Xpj4uVvnNCzuomqb
 MygKzQb48Gx23saBy4Za
 =SgQo
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new device support, features and cleanups for the 4.7 cycle.

New core support
* UV light modifier (for intensity)
* UV light index channel type.

New device support
* hp206c barometer and altimeter
  - new driver.
* mcp4131 potentiometer
  - new driver supporting lots of parts from Microchip.
* mma8452
  - FXLS8471Q support
- NXP LPC18XX SOC ADC
  - new driver.
- NXP LPC18XX SOC DAC
  - new driver.
- rockchip_saradc
  - support rk3399
* st accel
  - h3lis331dl support

Staging driver removals
* adis16204
  - obsolete part making it hard to get parts to test the driver in order
    to clean it up.
* adis16220
  - obsolete part making it hard to get the parts test the driver in order
    to clean it up.

Features
* core
  - convenience functions to claim / release direct access to the device.
    Makes more consistent handling of this corner easier. Used in ad7192 driver.
* ak8975
  - power regulator support.
* at91-sama5d2
  - differential channel support.
* mma8452
  - runtime pm support
  - drop device specific autosleep and use the runtime pm one instead.
* ms5611
  - DT bindings
  - oversampling ratio support

Cleanups and minor fixes
* MAINTAINERS
  - Peter got married - hence name change!

* Documentation
  - Fix a typo in in_proximity_raw description.
  - Add some missing docs for iio_buffer_access_funcs.

* Tools
  - update iio_event_monitor names to match new stuff.
  - make generic_buffer look for triggers ending in -trigger as we let these in
  for a number of drivers a long time back and now it is a fairly common
  option.

Drivers
* staging wide
  - convert bare unsigned usage to unsigned int to comply with coding style.
* non staging wide:
  - since boiler plate gpio handling of interrupts has been moved into the
   ACPI core we don't need to include gpio/consumer.h in a load of drivers so
   drop it.
* ad7606
  - fix an endian casting sparse warning.
* ak8975
  - fix a possible unitialized warning from gcc.
  - drop and unused field left over from earlier cleanups
  - fix a missing regulator_disable on exit.
* at91-sama5d2
  - typo and indentation
  - missing IOMEM dependency.
  - cleanup mode register usage by avoidling erasing whole thing when changing
  the sampling frequency.
* bmc150
  - use the core demux and available_scan_masks to simplify buffer handling
  - optimize the transfers in the trigger handler now we have a magic function
  to emulate bulk reads (under circumstances met here).  This matters with some
  rather dumb i2c adapters in particular.
  - use a single regmap_conf for all bus types as they were all the same.
* bmg160
  - use the core demux and available_scan_masks to simplify the buffer handling
  - optimize the transfers in the trigger handler now we have a magic funciton
  to emulate bulk rads (under circumstances met here).
  - drop gpio interrupt probing from the driver (ACPI) as now handled by the
  ACPI core.
* ina2xx-adc
  - update the CALIB register when RShunt changes.
  - fix scale for VShunt - in reality this error canceled out when used.
* isl29028
  - use regmap to retrieve the struct device instead of carrying a second
  copy of it around.
* kxcjk-1013
  - use core demux
  - optimize i2c transfers in the trigger handler.
* mcp4531
  - refactor to use a pointer to access model parameters instead of indexing
    into the array each time.
* mma8452
  - style fixes
  - avoid swtiching to active whenever the config changes
  - add missin i2c_device_id for mma8451
* mpu6050
  - fix possible NULL dereference.
  - fix the name / chip_id used when ACPI used (otherwise reports as NULL).
* ms5611
  - fix a missing regulator_disable that left the regulator on during removal.
* mxc4005
  - drop gpio interrupt handling for ACPI case from driver as the core now
  handles this case.
* st-sensors
  - note that there are only ever a maximum of 3 axis on current st-sensors
  so just allocate a fixed sized buffer big enough for that.
* tpl0102
  - change the i2c_check_functionality condition to bring it inline with other
    IIO users as EOPNOTSUPP.
* tsl2563
  - replace deprecated flush_scheduled_work
2016-04-04 12:31:05 -07:00
Marc Titinger
eaa3476a7e iio: ina2xx-adc: fix scale for VShunt
The scale would result in uV instead of expected mV.
Mostly cosmetic, since the value of 'Power' was computed OK.

Signed-off-by: Marc Titinger <marc.titinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:13:59 +01:00
Ludovic Desroches
d65113222c iio:adc:at91-sama5d2: add support for differential conversions
Add signed differential channels and update the voltage scale for
differential conversions.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:13:59 +01:00
Ludovic Desroches
94b2423019 iio:adc:at91-sama5d2: cleanup mode register use
Do not erase previous configuration of the mode register when setting
the sampling frequency.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:13:58 +01:00
Marc Titinger
d1ef4f2cae iio: ina2xx-adc: update the CALIB. register when RShunt changes
The user (or an init script) may setup RShunt via sysfs after the
driver was initialized, for instance based on the EEPROM contents
of a modular probe. The calibration register must be set accordingly.

Signed-off-by: Marc Titinger <marc.titinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-21 19:00:11 +00:00
David Wu
ae549a7221 iio: adc: rockchip_saradc: add saradc support for rk3399
The ADC is a 6-channel signal-ended 10-bit Successive
Approximation Register (SAR) A/D Converter.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-20 10:27:25 +00:00
Linus Torvalds
12e7b0a627 - New Drivers
- Freescale Touch Screen ADC
    - X-Powers AXP PMIC with RSB
    - TI TPS65086 Power Management IC (PMIC)
  - New Device Support
    - Supply device PCI IDs for Intel Broxton
  - Fix-ups
    - Move to clkdev_create() API; intel_quark_i2c_gpio
    - Complete re-write of TI's TPS65912 Power Management IC (PMIC)
    - Remove unnecessary function argument; axp20x
    - Separate out bus related code; axp20x
    - Coding Style changes; axp20x
    - Allow more drivers to be compiled as modules
    - Work around false positive 'used uninitialised' warning; db8500-prcmu
  - Bug Fixes
    - Remove do_div(); fsl-imx25-gcq
    - Fix driver init when built-in; tps65010
    - Fix clock-unregister leak; intel-lpss
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6+LJAAoJEFGvii+H/Hdh8kQP/2AKYzPZiw9fhLufsDPvXO5m
 BVdLYVyA11oQjQk7/Bh+5Rjz8mR5Tfv4uAJUReC3FOIfC/oJNBfBxYJLDV/P8S0/
 KaCEaZrpNmecKrsy+TjmFYtcRa51THAdjlWEUKRks/ZBjwP4YsNnh5reWe+wB7bS
 NFbCNhpXFvYXaDGH8MRhKqdChzZkxi+lgOBcFCKvUYO5/o6g/ZRUD/0TXUItJDwh
 F8ps5jImHC1imHeRIKWPNrrZqcYasKmObIhvOKMDcwNQPnjrAWq5QuFH4LFhGQ7d
 7NMQrBpaGvZyUNBVtL7ZF1xCJ68wAg/ZvZUkKVkax9ubLbSgf6VXYLQEbq+lyFn7
 H9A79xPAGN2nC9HsGnCqW0c0qgTOz0DIkbpuaxAGlzBt0zooc19i3cuUd7LX0NG8
 ttLaIP1hX6rgvXSFnF0Ihe3iN5A90LTT3ldbn3A8awyS42vEAbUVL9ivRL21BUbB
 ilSTO2W05a9HlIVe43o2euytaGvDYX7RbL/g3WcJLF1pA01RCIDQAI5usMpgF3bf
 fJ7cszll0OVTTb5UzbfrNsxAn4oNtbwMIspMMFe17pbmxqh+4oomM3CkuTrMVQfB
 pA7Uv0jh/mLCV6P52ZEsNiecn0/l0rID8d/DCHjunr2xBWIOrglzZ7n+vLTJMNJ6
 72GVBkYRMLbRm+eph1Tp
 =gTBA
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Freescale Touch Screen ADC
   - X-Powers AXP PMIC with RSB
   - TI TPS65086 Power Management IC (PMIC)

  New Device Support:
   - Supply device PCI IDs for Intel Broxton

  Fix-ups:
   - Move to clkdev_create() API; intel_quark_i2c_gpio
   - Complete re-write of TI's TPS65912 Power Management IC (PMIC)
   - Remove unnecessary function argument; axp20x
   - Separate out bus related code; axp20x
   - Coding Style changes; axp20x
   - Allow more drivers to be compiled as modules
   - Work around false positive 'used uninitialised' warning; db8500-prcmu

  Bug Fixes:
   - Remove do_div(); fsl-imx25-gcq
   - Fix driver init when built-in; tps65010
   - Fix clock-unregister leak; intel-lpss"

* tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
  mfd: intel-lpss: Pass I2C configuration via properties on BXT
  mfd: imx6sx: Add PCIe register definitions for iomuxc gpr
  mfd: ipaq-micro: Use __maybe_unused to hide pm functions
  mfd: max77686: Add max77802 to I2C device ID table
  mfd: max77686: Export OF module alias information
  mfd: max77686: Allow driver to be built as a module
  mfd: stmpe: Add the proper PWM resources
  mfd: tps65090: Set regmap config reg counts properly
  mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled
  mfd: as3711: Set regmap config reg counts properly
  mfd: rc5t583: Set regmap config reg counts properly
  gpio: tps65086: Add GPO driver for the TPS65086 PMIC
  mfd: mt6397: Add platform device ID table
  mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists
  mfd: mt6397: Add MT6323 support to MT6397 driver
  mfd: mt6397: Add support for different Slave types
  mfd: mt6397: int_con and int_status may vary in location
  dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC
  mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists
  mfd: Add documentation for ACT8945A DT bindings
  ...
2016-03-18 10:15:11 -07:00
Joachim Eastwood
a583c24dee iio: adc: add NXP LPC18xx ADC driver
Add base support for the 10-bit SAR ADC peripheral found
on NXP LPC18xx/43xx SoCs.

This is a minimal driver that does not support burst mode,
interrupts, DMA or hardware triggers.

User manual with register description can be found on:
LPC18xx: www.nxp.com/documents/user_manual/UM10430.pdf
LPC43xx: www.nxp.com/documents/user_manual/UM10503.pdf

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12 18:11:48 +00:00
Arnd Bergmann
0708677558 iio: adc/imx25-gcq: Move incorrect do_div
The newly added driver uses do_div() to device a 32-bit number, which now
provokes a warning:

drivers/iio/adc/fsl-imx25-gcq.c: In function 'mx25_gcq_setup_cfgs':
include/asm-generic/div64.h:207:28: warning: comparison of distinct pointer types lacks a cast
  (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \

This replaces the do_div() call with a straight division operator.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 6df2e98c3e ("iio: adc: Add imx25-gcq ADC driver")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-09 12:50:51 +07:00
Krzysztof Kozlowski
e84a41d5db iio: adc: Fix build error of missing devm_ioremap_resource on UM
The devres.o gets linked if HAS_IOMEM is present so on ARCH=um
allyesconfig (COMPILE_TEST) failed with:

drivers/built-in.o: In function `at91_adc_probe':
at91-sama5d2_adc.c:(.text+0x48f548): undefined reference to `devm_ioremap_resource'

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 18:48:14 +00:00
Ludovic Desroches
f0fa15cce1 iio:adc:at91-sama5d2: fix identation
Remove some extra tabs.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 15:02:59 +00:00
Ludovic Desroches
43d33f7458 iio:adc:at91-sama5d2: fix typo
Fix typo in the name of a macro.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 15:01:46 +00:00
Grygorii Strashko
ac65ca682e iio: adc: palmas: Drop IRQF_EARLY_RESUME flag
Palmas gpadc IRQs are nested threaded and this flag is not required for nested
irqs anymore, since commit 3c646f2c6a ("genirq: Don't suspend nested_thread
irqs over system suspend") was merged.

Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-27 17:20:52 +00:00
Matt Ranostay
f8d9d3b434 iio: convert to common i2c_check_functionality() return value
Previously most drivers that used a i2c_check_functionality() check
condition required various error codes on failure. This patchset
converts to a standard of -EOPNOTSUPP

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-27 17:17:43 +00:00
Andrew F. Davis
1961bce764 iio: ina2xx: Remove trace_printk debug statments
These are generally for devlopment use only, remove these
from performance-critical code, convert to dev_dbg elswhere.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:44:20 +00:00
Andrew F. Davis
7906dd52c5 iio: ina2xx: Fix whitespace and re-order code
Group of probably overly rigorous whitespace and code cleanups.
 - Alphabetize includes
 - Assign to variables in the order they are defined
 - Alignment issues
 - Group alike statements together
 - Use helper macros

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:44:06 +00:00
Greg Kroah-Hartman
d9750a2f9e 2nd round of new IIO device support, features and cleanups for the 4.6 cycle.
New Device Support
 * Apex stx104 DAC
   - new driver for this PC104 board. Right now DAC support only.
 * ADI ad5064
   - Add support for ad5625, ad5627, ad5645, ad5665, ad5667 DACs.
   - Add support for Linear Technology ltc2606, ltc2607, ltc2609, ltc2616,
     ltc2617, ltc2619, ltc2626, ltc2627 and ltc2629.
 * ADI ad7192
   - add support for the ad7193
 * Invensense mpu6050
   - substantial rework of driver to use regmap allowing SPI support extending
     the now split driver to cover the MPU6000.
 * TI adc0832
   - new driver supporting ADC0831, ADC0832, ADC0834 and ADC0838 ADCs.
 * TI ads1015
   - new driver, note that there is an existing hwmon driver. The long term
     intention is to probably remove the hwmon driver but for now we just have
     guards in place to ensure this driver is not built if that one is enabled.
 * TI afe4403
   - new driver for this heart rate monitor / pulse oximeter front end chip.
 * TI afe4404
   - new driver for this heart rate monitor / pulse oximeter front end chip.
 
 Staging Graduations
 * mxs-lradc
   - A combined general purpose and touch screen (input) device driver.
     Originally held in staging to allow reworking into and MFD but as
     that wasn't happening and isn't an absolute requirement we are moving
     it out of staging.
 
 Driver new features
 * ms5611
   - triggered buffer support
   - IIO_CHAN_INFO_SCALE to aid the triggered buffer support.
 
 Driver cleanups / reworks / fixes
 * ad5064
   - Use an enum for the register map layout to allow support of additional
     chips (precursor to the new support listed above).
   - Structural driver changes to allow support of the slightly different
     handling for the ltc parts above.
 * ad5933
   - drop an exceptional & unnecessary for a function pointer.
 * ad7606
   - Cleanup the repeated copies of pm ops.
   - consolidate the various channels specs via a sport of rearranging so only
     one version is needed.
 * atlas ph sensor
   - add select IRQ_WORK
 * hmc8543 (soon to move out of staging)
   - Comment style fixes
   - functionality of suspend and resume was swapped.
 * spear-adc
   - use devm_clk_dev instead of managing the clk lifetime by hand.
 
 Core
 * Use new dmaengine_terminate_sync call to avoid a theoretical race.
 * Fix docs for mlock in struct iio_dev as it is correctly taken in some
   drivers (docs used to say for core only).
 * Add a helper function for calculating the scan index storage size within
   the core cutting out some cut and paste versions of the same code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWwJeMAAoJEFSFNJnE9BaI9N8P/3nvhVTXXTkwl8UF22dAyRhP
 l6Szj8vk6M9yJ0z8sBPPzKRoPOESuZU/N8BndN5w17Em3fU9k3Qe6CaUYGTKziFt
 hzuL1ySpnrGphKZR6AfONKR6m+yfk+PYVPJlMG1EEdop2nkMyezoZxh9yjNXfm9H
 gekh41rz8LrAluG4n88XdJMzIGBRfup7PPt+sJ5Ao6AMrrQVrx4DA+dTaoVJ50ED
 rvh1DIwUDH158a27Wgc5QgxyA2dSL+65KiD6HR69XKq3exUZ6AlvXHCHwOZR8/xp
 /MtBNP7V9C0vO7PBNIxRQWIdsLRQdfaiCJSWEHH1lqxQK2S6DFYzSXFCA8lQ448Q
 1qH8G2JiYzbzPVX9noXvuQJJYnGa1xsKvdOGFzi/mRXEGTaygPVYEjn2JN4WzRho
 zgAdLdI6RkPVuqDp7Mliu8lsC9giQoLD22Ln2z9AzF1PDMrCD+p2Ff+q+1xQip/q
 8B8AMniPkK8Bn5mMAGPrN6FqUt5cqtnRkECC/Yzg8B21qLcefeFmcwSecmOrd331
 +7PWWDOWCmHVMweo9whZhaS3yZFNerl7G2DzwDI76So+eeBFikFvgitTMbuWWlyG
 SXMqUqfelBs3SpftKlAKXxZ4PK/MEo45LzNSfbi0J69zpIFTqICR9nnN8/rN9ew0
 KhZtcL9Q1H6yJwGuefdp
 =LIQe
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

2nd round of new IIO device support, features and cleanups for the 4.6 cycle.

New Device Support
* Apex stx104 DAC
  - new driver for this PC104 board. Right now DAC support only.
* ADI ad5064
  - Add support for ad5625, ad5627, ad5645, ad5665, ad5667 DACs.
  - Add support for Linear Technology ltc2606, ltc2607, ltc2609, ltc2616,
    ltc2617, ltc2619, ltc2626, ltc2627 and ltc2629.
* ADI ad7192
  - add support for the ad7193
* Invensense mpu6050
  - substantial rework of driver to use regmap allowing SPI support extending
    the now split driver to cover the MPU6000.
* TI adc0832
  - new driver supporting ADC0831, ADC0832, ADC0834 and ADC0838 ADCs.
* TI ads1015
  - new driver, note that there is an existing hwmon driver. The long term
    intention is to probably remove the hwmon driver but for now we just have
    guards in place to ensure this driver is not built if that one is enabled.
* TI afe4403
  - new driver for this heart rate monitor / pulse oximeter front end chip.
* TI afe4404
  - new driver for this heart rate monitor / pulse oximeter front end chip.

Staging Graduations
* mxs-lradc
  - A combined general purpose and touch screen (input) device driver.
    Originally held in staging to allow reworking into and MFD but as
    that wasn't happening and isn't an absolute requirement we are moving
    it out of staging.

Driver new features
* ms5611
  - triggered buffer support
  - IIO_CHAN_INFO_SCALE to aid the triggered buffer support.

Driver cleanups / reworks / fixes
* ad5064
  - Use an enum for the register map layout to allow support of additional
    chips (precursor to the new support listed above).
  - Structural driver changes to allow support of the slightly different
    handling for the ltc parts above.
* ad5933
  - drop an exceptional & unnecessary for a function pointer.
* ad7606
  - Cleanup the repeated copies of pm ops.
  - consolidate the various channels specs via a sport of rearranging so only
    one version is needed.
* atlas ph sensor
  - add select IRQ_WORK
* hmc8543 (soon to move out of staging)
  - Comment style fixes
  - functionality of suspend and resume was swapped.
* spear-adc
  - use devm_clk_dev instead of managing the clk lifetime by hand.

Core
* Use new dmaengine_terminate_sync call to avoid a theoretical race.
* Fix docs for mlock in struct iio_dev as it is correctly taken in some
  drivers (docs used to say for core only).
* Add a helper function for calculating the scan index storage size within
  the core cutting out some cut and paste versions of the same code.
2016-02-14 11:10:38 -08:00
Daniel Baluta
ecc24e72f4 iio: adc: Add TI ADS1015 ADC driver support
The driver has sysfs readings with runtime PM support for power saving.
It also offers buffer support that can be used together with IIO software
triggers.

Datasheet can be found here:
	http://www.ti.com.cn/cn/lit/ds/symlink/ads1015.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-13 20:54:15 +00:00
Markus Pargmann
6df2e98c3e iio: adc: Add imx25-gcq ADC driver
This is a conversion queue driver for the mx25 SoC. It uses the central
ADC which is used by two seperate independent queues. This driver
prepares different conversion configurations for each possible input.
For a conversion it creates a conversionqueue of one item with the
correct configuration for the chosen channel. It then executes the queue
once and disables the conversion queue afterwards.

The reference voltages are configurable through devicetree subnodes,
depending on the connections of the ADC inputs.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-11 15:40:41 +00:00
Ksenija Stanojevic
f836c45922 iio: adc: Move mxs-lradc out of staging
Move mxs-lradc driver from drivers/staging/iio/adc to drivers/iio/adc.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-10 19:29:37 +00:00
Akinobu Mita
efc945fb72 iio: adc: add support for ADC0831/ADC0832/ADC0834/ADC0838 chips
This adds ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver.
I have tested with ADC0831 and ADC0832.  The remaining ADC0834 and
ADC0838 are very similar to ADC0832.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-09 22:22:32 +00:00
Greg Kroah-Hartman
5ba907a949 Merge 4.5-rc3 into staging-next
We want the upstream staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07 17:34:04 -08:00
Greg Kroah-Hartman
fec2f3335c First round of new IIO device support, features and cleanups for the 4.6 cycle.
Device Support
 * ad5761
   - new driver
 * at91_sama5d2 ADC.
   - new driver and MAINTAINERS entry.
   - minor cleanups followed.
 * atlas pH-SM
   - new driver (this has possibly the prettiest data sheet I've ever seen)
 * mcp3422
   - mcp3425 ADC added.
 * mcp4725
   - mcp4726 DAC added.
 * mma8452
   - mma8451q accelerometer added.
 * mpl115
   - mpl115a1 added (a lot bigger than it seems as this is an SPI part whereas
     previous parts were i2c).
 * si7005
   - Hoperf th02 (seems to be a repackaged part)
 * si7020
   - Hoperf th06 (seems to be a repackaged part)
 
 New features
 * Core
   - IIO_PH type. Does what it says on the tin.
 * max30100
   - LED current configuration support.
 * mcp320x
   - more differential measurement combinations.
 * mma8452
   - free fall deteciton
 - opt3001
   - enable operation without a IRQ line.
   - device tree docs.  Somehow the original docs have disappeared down
     a rabbit hole, so here is a new set.
 * st-sensors
   - Support active-low interrupts.
 
 Cleanups and minor / not so minor reworks
 * Documentation
   - drop some defunct ABI from the docs in staging.
 * presure / Kconfig
   - white space cleanup.
 * ad7150
   - BIT macro usage
   - Alignment fixes
 * ad7192
   - false indent fixed.
 * ak8975
   - constify the ak_def structures
 * axp288
   - drop a redundant double const.
 * dht11
   - substantial reliability improvements by being more tolerant
     of missing start bits.
   - simplify the decoding algorithm
 * mma8452
   - whitespace cleanup
 * mpl115
   - don't bother setting i2c_client_data as nothing uses it.
 * mpu6050
   - drop unused function parameter.
 * opt3001
   - extract integration time as constants.
   - trivial refactoring.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWr8HEAAoJEFSFNJnE9BaIIWMP/A6hJdAi3QOipB75QYBHL3R2
 7fe7Bcd83i2to/Ohk9XirRwyP7kCqt1ZP7cnaIAevNxmwQ9fqIFgrxCK8BfF+lMk
 60PXfEdinPk1rWguqEMwaYq1xVAOTgWYl8F4GVG3nGIvTHovAYaZW0UcTUl5Gz+l
 WErEZQ5xgnf7e/29ds74eD3YaOti8E1mzhBLXFJH7lllsSMJttbp9Xb5J0QJrv4a
 Ly8Ru5DBRGZYKi0VplFIjncKLZgX/VUUSPNL+NXtPnGD2Qp2zx0bJ3eIqNmeEYZl
 isAGIc6l4XPXQLczyRaPbcQLobMxOHMP2uuXxY/OAbe2DX9/6ILcB2QigARAFHf2
 7vVcx3JlxXUtwS/bPpZSd5hHrvjWLR7+gyuZTA4b/scV4+GvknMl8e6IIh4Ux3/T
 d24V37bOIENrXCoyf81veap0xca6xQNSzCVuo8+1+QYqn6DxvoJw3p38Cmxb8eB8
 7M+nQJP9SwLtbSUak8g1KVrtWBNsMrMGwoiuZq5SkK1PQTSXnSaJPTL0OoPoefNi
 uIY5qD5FrUp9jlNbBP2M2E3CcG5CJcMElxyBgd7F5lEVxSWPOuyOcpJHIoCCCgIf
 o6vwOYXXfD4ytv/E6jg+Bbv3ZYCylFhcoZOqPgTC/sOnSI9RwhJ6XdAg6VU8sv07
 piH1AVWb91HKRN2dt2ZB
 =fgTH
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new IIO device support, features and cleanups for the 4.6 cycle.

Device Support
* ad5761
  - new driver
* at91_sama5d2 ADC.
  - new driver and MAINTAINERS entry.
  - minor cleanups followed.
* atlas pH-SM
  - new driver (this has possibly the prettiest data sheet I've ever seen)
* mcp3422
  - mcp3425 ADC added.
* mcp4725
  - mcp4726 DAC added.
* mma8452
  - mma8451q accelerometer added.
* mpl115
  - mpl115a1 added (a lot bigger than it seems as this is an SPI part whereas
    previous parts were i2c).
* si7005
  - Hoperf th02 (seems to be a repackaged part)
* si7020
  - Hoperf th06 (seems to be a repackaged part)

New features
* Core
  - IIO_PH type. Does what it says on the tin.
* max30100
  - LED current configuration support.
* mcp320x
  - more differential measurement combinations.
* mma8452
  - free fall deteciton
- opt3001
  - enable operation without a IRQ line.
  - device tree docs.  Somehow the original docs have disappeared down
    a rabbit hole, so here is a new set.
* st-sensors
  - Support active-low interrupts.

Cleanups and minor / not so minor reworks
* Documentation
  - drop some defunct ABI from the docs in staging.
* presure / Kconfig
  - white space cleanup.
* ad7150
  - BIT macro usage
  - Alignment fixes
* ad7192
  - false indent fixed.
* ak8975
  - constify the ak_def structures
* axp288
  - drop a redundant double const.
* dht11
  - substantial reliability improvements by being more tolerant
    of missing start bits.
  - simplify the decoding algorithm
* mma8452
  - whitespace cleanup
* mpl115
  - don't bother setting i2c_client_data as nothing uses it.
* mpu6050
  - drop unused function parameter.
* opt3001
  - extract integration time as constants.
  - trivial refactoring.
2016-02-01 13:10:03 -08:00
Greg Kroah-Hartman
5982557ac6 Second set of IIO fixes for the 4.5 cycle. These ones are mostly
dependent on patches from the recent merge cycle.
 
 * adc, imu and iio staging drivers
   - !HAS_IOMEM dependency fixes
 * dht11
   - use boottime clock for time measurement to avoid incorrect measurements
    due to clock updates.
 * lidar
   - correct a return value for short i2c transfers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWr72hAAoJEFSFNJnE9BaILWsP/3hVDegr+6TRoVgqqfk8USz2
 Jb3omDrxvb1LDlMgR5sbwYMQw3JKg9Dn6ACPtsFJ4kdOHvZ/xQ5dzwKXuUTe9MfB
 ij3gl1/wO6czUvdW0FYEKwMHORh/z5ILKaVS/lOPjeJnRPhFD4GNRo3nM6qQ/le8
 nl/Q1RB1ONml0EKzWgQrcFAzdRessPU3ALsvXrmJQVn6Ah1fYcig46/jn/PZ8/iO
 1/9lgROCo78vwHMvu1vuBI/pjfm0Ry/AB1WTGrjquMY4Q/kEwM18qE2I4lRfoQSd
 3N9DvGkfhkmLpnqag3ujC5uVtMJK/SUlK5DPaAsLT7PtTuQ75UQfFZpy0syANfbD
 lLVnKqMBbTWpetin8butW1OBgKaCWukq9zvFvsp1ZbbxJIEeYaIF6vdkcVyn66j/
 O3u45zdbL0WrhvPZrQRbTa3jdXLVMe4psaBWF1fhBW/+8tYEpPzddHuE2miyVHP8
 2uxg7H+UR7WRJyZ20BzF18G1AFjtAouzuVtWtPEAw2z8BbtMfAf9g+02xHhwYmVd
 USdPfVHhAmYgFsgfRLRZRmbiSlg/SzBHK0RVS9ZwXsh3nnPvuYflfT/bCXxGvBzI
 j8pVAAkfrnTItKuFQ2rTgQ23JUHdOdmwkYtrMa6bHuFCCN6kIH8BTVxwGexEhE5U
 tBTWNHQxx/N1VhtY7BQG
 =iF19
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.5b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 4.5 cycle.  These ones are mostly
dependent on patches from the recent merge cycle.

* adc, imu and iio staging drivers
  - !HAS_IOMEM dependency fixes
* dht11
  - use boottime clock for time measurement to avoid incorrect measurements
   due to clock updates.
* lidar
  - correct a return value for short i2c transfers.
2016-02-01 13:08:26 -08:00
Greg Kroah-Hartman
48436e82fd First set of IIO fixes for the 4.5 cycle.
This set comprises those not dependent on patches in the 4.5 merge cycle.
 A second set will follow shortly with ones that are.
 
 * core in kernel interfaces
   - fix a possible NULL dereference that is a theoretical possibility
     via odd usage of iio_channel_release. Pretty much a hardening of
     the interface, but observed in the wild with the twl4030_charger
     driver.
 * acpi-als
   - report the data as processed as it is in lux.  This fixes a wrong
     use of the IIO ABI.  However, old _raw version retained to avoid
     breaking any userspace in the wild that is relying on that (none
     known but it doesn't hurt us much to retain it)
 * ade7753
   - fix some error handling to avoid use of unitialized data.
 * ltr501
   - use a signed return type for ltr501_match_samp_freq so as to allow
     returning of an error code.
 * mcp4725
   - set name field of struct iio_dev to ensure the sysfs name attribute
     doesn't give NULL.
 * mpl115
   - temperature offset sign is wrong.
 * stk8ba50
   - IIO_TRIGGER dependency added
 * ti_am335x_adc
   - Label buffer as a software buffer. It's actually a hybrid of a
     true hardware buffer feeding a kfifo, but the meaning of these fields
     has changed a little recently and in this case it should be labeled
     a software buffer ensure it is allowed to use the kfifo.
 * vf610_adc
   - HAS_IOMEM dependency
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWr7r1AAoJEFSFNJnE9BaIEu4QAIb4FPipmsRLbNlPpngtYL9k
 uH13UiZLdGRdZsif2S9B0S5L0+PG25UTzXbtgleUq4IxdY4LnSyfa+/V+Ifn3SPE
 +F3Vr5Uqd9S/uRNNwJjgvSMf60s9J8Vm3PqFJ7aH8glJ7CRR4IbDAPJ7GXhUx4mt
 o5VXYLIm178JbwC6zKu8AanYGtRADG6orLqMbjCEWksK0SAuCz772CLgUCLMFxHC
 z1n/mdG8nadTZZDbuaHda5C5r9Baiqt/Wl7e/3gg7gHBl5LjcGUejlyD2VKRilpO
 4exHIARkHqlx/fXBxUxRN9kDbRK+6cuxca8MHn01Kn/XM7D8XoeZ1orQm+bItyOL
 9aHIoV2szS+VQMDE1oB+eKU8KZRGD0rLNKJRNumho+0lFtdbSZ0VqeBqn/wGYEBa
 QyGjpjdVCltdZJ2BX4kaUGcCQeWnpqqLc6jrXuUN0qSzvHyspt3XsllCKrTWbvNu
 oV1uDM+R8+YSsDQmgTpGuoTmpRHq2ED2lAJqRVan/Zi+Yk6gjxyDcIe1V4LbLdTt
 asXxzxp/eYFfM/K5nJyyASp3jl66f8QoQaVDly5XjXsf400xQKa3PlahQLWx66JM
 YfGJfHwhyzamO+mgiyuX1O4C7CO7uvHZgC/H+p7bB03GdtcUzjT1ZlBrR0JJlojg
 crBzUtRyX26wUNTGxHXG
 =27Pv
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 4.5 cycle.

This set comprises those not dependent on patches in the 4.5 merge cycle.
A second set will follow shortly with ones that are.

* core in kernel interfaces
  - fix a possible NULL dereference that is a theoretical possibility
    via odd usage of iio_channel_release. Pretty much a hardening of
    the interface, but observed in the wild with the twl4030_charger
    driver.
* acpi-als
  - report the data as processed as it is in lux.  This fixes a wrong
    use of the IIO ABI.  However, old _raw version retained to avoid
    breaking any userspace in the wild that is relying on that (none
    known but it doesn't hurt us much to retain it)
* ade7753
  - fix some error handling to avoid use of unitialized data.
* ltr501
  - use a signed return type for ltr501_match_samp_freq so as to allow
    returning of an error code.
* mcp4725
  - set name field of struct iio_dev to ensure the sysfs name attribute
    doesn't give NULL.
* mpl115
  - temperature offset sign is wrong.
* stk8ba50
  - IIO_TRIGGER dependency added
* ti_am335x_adc
  - Label buffer as a software buffer. It's actually a hybrid of a
    true hardware buffer feeding a kfifo, but the meaning of these fields
    has changed a little recently and in this case it should be labeled
    a software buffer ensure it is allowed to use the kfifo.
* vf610_adc
  - HAS_IOMEM dependency
2016-02-01 13:07:38 -08:00
Richard Weinberger
0165c3005f iio: adc: Fix dependencies for !HAS_IOMEM archs
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 15:43:49 +00:00
Colin Ian King
7ca6574a7a iio: adc: axp288: remove redundant duplicate const on axp288_adc_channels
duplicate const can be removed, it is redundant. Found by static
analysis using smatch.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-23 16:30:57 +00:00