Remove some unnecessary includes and get rid of the abusive of_platform
in favor of the correct headers.
Reported-by: Rob Herring <robh+dt@kernel.org>
Reported-by: Georgi Djakov <djakov@kernel.org>
Fixes: 2eab57b131 ("interconnect: qcom: Add SM6115 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231214-topic-6115iccfix-v1-1-9ad999683a7d@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Now that both eDMA and iATU are prepared to support async transfer, let's
enable MHI async read/write by supplying the relevant callbacks.
In the absence of eDMA, iATU will be used for both sync and async
operations.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The driver currently supports only the sync read/write operation i.e., it
waits for the DMA transfer to complete before returning to the caller
(MHI stack). But it is sub-optimal and defeats the actual purpose of using
DMA.
So let's add support for DMA async read/write operation by skipping the DMA
transfer completion and returning to the caller immediately. When the
completion actually happens later, the driver will be notified using the
DMA completion handler and in turn it will notify the caller using the
newly introduced callback in "struct mhi_ep_buf_info".
Since the DMA completion handler is invoked from the interrupt context, a
separate workqueue (epf_mhi->dma_wq) is used to notify the caller about the
completion of the transfer.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Even though iATU only supports synchronous read/write, the MHI stack may
call async read/write callbacks without knowing the limitations of the
controller driver. So in order to maintain compatibility, let's simulate
async read/write operation with iATU by invoking the completion callback
after memcpy.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
These callbacks can be implemented by the controller drivers to perform
async read/write operation that increases the throughput.
For aiding the async operation, a completion callback is also introduced.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In the preparation for adding async API support, let's rename the existing
APIs to read_sync() and write_sync() to make it explicit that these APIs
are used for synchronous read/write.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In the preparation of DMA async support, let's pass the parameters to
read_from_host() and write_to_host() APIs using mhi_ep_buf_info structure.
No functional change.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
MHI spec defines the interrupt moderation timer feature using which the
host can limit the number of interrupts being raised for an event ring by
the device. This feature allows the host to process multiple event ring
elements by a single IRQ from the device, thereby eliminating the need to
process IRQ for each element.
The INTMODT field in the event context array provides the value to be used
for delaying the IRQ generation from device. This value, along with the
Block Event Interrupt (BEI) flag of the TRE defines how IRQ is generated to
the host.
Support for interrupt moderation timer is implemented using delayed
workqueue in kernel. And a separate delayed work item is used for each
event ring.
Link: https://lore.kernel.org/r/20231026045513.12981-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use slab allocator for allocating the memory for objects used frequently
and are of fixed size. This reduces the overheard associated with
kmalloc().
Suggested-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20231018122812.47261-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Though we do check the event ring read pointer by "is_valid_ring_ptr"
to make sure it is in the buffer range, but there is another risk the
pointer may be not aligned. Since we are expecting event ring elements
are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer
could lead to multiple issues like DoS or ring buffer memory corruption.
So add a alignment check for event ring read pointer.
Fixes: ec32332df7 ("bus: mhi: core: Sanity check values from remote device before use")
cc: stable@vger.kernel.org
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231031-alignment_check-v2-1-1441db7c5efd@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add generic info for SDX75 based modems. SDX75 takes longer to set ready
during power up. Hence use separate configuration.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1699344890-87076-3-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Some devices(eg. SDX75) take longer than expected (default, 8 seconds) to
set ready after reboot. Hence add optional ready timeout parameter and pass
the appropriate timeout value to mhi_poll_reg_field() to wait enough for
device ready as part of power up sequence.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1699344890-87076-2-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
It is possible that the host controller driver would use DMA framework to
write the event ring element. So avoid allocating event ring element on the
stack as DMA cannot work on vmalloc memory.
Cc: stable@vger.kernel.org
Fixes: 961aeb6892 ("bus: mhi: ep: Add support for sending events to the host")
Link: https://lore.kernel.org/r/20230901073502.69385-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
QCM2290 has a single BWMONv4 intance for CPU. Document it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-3-4cbb567743bb@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Updates for the hwtracing subsystem includes :
- Support for CoreSight TPDM DSB set
- Support for tuning Cycle count Threshold for CoreSight ETM via perf
- Support for TRBE on ACPI based systems
- Support for choosing buffer mode in ETR for sysfs mode
- Improvements to HiSilicon PTT driver
- Cleanups to Ultrasoc SMB driver
- Cleanup .remove callback for various Coresight platform drivers
- Remove Leo Yan from Reviewers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=7+gH
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v6.8
Updates for the hwtracing subsystem includes :
- Support for CoreSight TPDM DSB set
- Support for tuning Cycle count Threshold for CoreSight ETM via perf
- Support for TRBE on ACPI based systems
- Support for choosing buffer mode in ETR for sysfs mode
- Improvements to HiSilicon PTT driver
- Cleanups to Ultrasoc SMB driver
- Cleanup .remove callback for various Coresight platform drivers
- Remove Leo Yan from Reviewers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (32 commits)
coresight: ultrasoc-smb: Use guards to cleanup
coresight: ultrasoc-smb: Convert to platform remove callback returning void
coresight: trbe: Convert to platform remove callback returning void
coresight: replicator: Convert to platform remove callback returning void
coresight: funnel: Convert to platform remove callback returning void
coresight: etm4x: Convert to platform remove callback returning void
coresight: dummy: Convert to platform remove callback returning void
coresight: etm4x: Fix width of CCITMIN field
coresight-tpdm: Correct the property name of MSR number
hwtracing: hisi_ptt: Optimize the trace data committing
hwtracing: hisi_ptt: Disable interrupt after trace end
Documentation: ABI: coresight-tpdm: Fix Bit[3] description indentation
coresight-tpdm: Add nodes for dsb msr support
dt-bindings: arm: Add support for DSB MSR register
coresight-tpdm: Add nodes for timestamp request
coresight-tpdm: Add nodes to configure pattern match output
coresight-tpdm: Add nodes for dsb edge control
coresight-tpdm: Add node to set dsb programming mode
coresight-tpdm: Add nodes to set trigger timestamp and type
coresight-tpdm: Add reset node to TPDM node
...
Do not use "/**" for non-kernel-doc comments. This prevents a warning
from scripts/kernel-doc:
warning: expecting prototype for extcon(). Prototype was for USB_ID_DEBOUNCE_MS() instead
Link: https://lore.kernel.org/lkml/20231205231204.1130-1-rdunlap@infradead.org/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add device tree bindings for HDC3020/HDC3021/HDC3022 humidity and
temperature sensors.
Signed-off-by: Li peiyu <579lpy@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231211123101.9868-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for HDC302x integrated capacitive based relative
humidity (RH) and temperature sensor.
This driver supports reading values, reading the maximum and
minimum of values and controlling the integrated heater of
the sensor.
Co-developed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Li peiyu <579lpy@gmail.com>
Link: https://lore.kernel.org/r/20231211122940.9791-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The in_temp_peak_raw attribute is already in use, but its documentation
is still missing. The in_humidityrelative_raw must be documented for a
new iio user that supports this attribute. Add temp and humidityrelative
use cases.
When at it, remove an extra blank space in the description.
For users that support minimum values, a new in_<type>_trough_raw
attribute is required. Add this attribute and document the first uses of
it for temp and humidityrelative types.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231211122840.9760-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The IIO_CHAN_INFO_PEAK info element is used for maximum values and
currently there is no equivalent for minimum values. Instead of
overloading the existing peak info element, a new info element can
be added.
In principle there is no need to add a _TROUGH_SCALE element as the
scale will be the same as the one required for INFO_PEAK, which in
turn is sometimes omitted if a single scale for peaks and raw values
is required.
Add an IIO_CHAN_INFO_TROUGH info element for minimum values.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231211122747.9723-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add comment about intensity scale being poorly defined and
having no proper units.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231207134200.329174-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
MLX90635 is an Infra Red contactless temperature sensor most suitable
for consumer applications where measured object temperature is in range
between -20 to 100 degrees Celsius. It has improved accuracy for
measurements within temperature range of human body and can operate in
ambient temperature range between -20 to 85 degrees Celsius.
Driver provides simple power management possibility as it returns to
lowest possible power mode (Step sleep mode) in which temperature
measurements can still be performed, yet for continuous measuring it
switches to Continuous power mode where measurements constantly change
without triggering.
Signed-off-by: Crt Mori<cmo@melexis.com>
Link: https://lore.kernel.org/r/c6590e4fb8d993a5317b486a3e45e1bb6e9e3318.1701872051.git.cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
getting corrupted
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmV1nDUACgkQEsHwGGHe
VUqC3Q/9GF3IjEzKZAwTqw9ir2Nq9fFKkDZVT1ZCkXcg3bc6t5Dp68NcMPEoPdNE
6ONaEwKhZxqPyivI7u1ExdZnHYDMRWolZmjs/x19c+g3Zo6QzT+6blMdoWvl6nV2
RD3macPt5w5bcJ8ugSM4ekTQgo4nPU5VhBS52zDARx0W9ufpIk3YKmxmVQjhuV5J
z/nfewUuUtAHDxnbF8pRvN8WoSg15Z5iERksdcj8Wagjx79cMAR6liuauJNkj9dP
lldG69ODdJeZc9L/SUkLEgYPVaq+G6BOKgWXbzeiRM9LedHN3iQlT9JUttLHN383
NdTbQ6lboViP1O64WuoqJFVDYvY0DvVLUll4URywfT3lPbISGvxhg0Xj+4E8F5W9
A9pB9TDZwRXwrNuRLksaY0v/Glfo7eUr6252aDbgrUovJCDOwfRB+pI4ywpfoL/+
2eKkJR1mUjoCXirkbYjcm7EhnTSKxiKmCYK7pyol3fJCsK/4bQF7mJ4UyDFIB3Na
VXVD41KkMsaAdIQp4HbdduYaPSCQvQee6ahtobQwcxyBWGXRzurTw4ubHlzSeN9F
fIfxF9PfSY+So2J9IrU1uYKPvfbUWfU3b1urQPhPvVlbVlZmfG579ek6+4bhagsg
UztDRvv9lCxvBskruIMfelAduXsDkDi0UwJ0/TXlPnQGzYlDdeI=
=07a8
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure tasks are thawed exactly and only once to avoid their state
getting corrupted
* tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
freezer,sched: Do not restore saved_state of a thawed task
group
-----BEGIN PGP SIGNATURE-----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=QxHj
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Borislav Petkov:
- Make sure perf event size validation is done on every event in the
group
* tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_event_validate_size()
callback so that the callback runs only on AMD
- Make sure SEV-ES protocol negotiation happens only once and on the BSP
-----BEGIN PGP SIGNATURE-----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=uIo2
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a forgotten CPU vendor check in the AMD microcode post-loading
callback so that the callback runs only on AMD
- Make sure SEV-ES protocol negotiation happens only once and on the
BSP
* tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Check vendor in the AMD microcode callback
x86/sev: Fix kernel crash due to late update to read-only ghcb_version
* Set .owner for various KVM file_operations so that files refcount the
KVM module until KVM is done executing _all_ code, including the last
few instructions of kvm_put_kvm(). And then revert the misguided
attempt to rely on "struct kvm" refcounts to pin KVM-the-module.
ARM:
* Do not redo the mapping of vLPIs, if they have already been mapped
s390:
* Do not leave bits behind in PTEs
* Properly catch page invalidations that affect the prefix of a nested
guest
x86:
* When checking if a _running_ vCPU is "in-kernel", i.e. running at CPL0,
get the CPL directly instead of relying on preempted_in_kernel (which
is valid if and only if the vCPU was preempted, i.e. NOT running).
* Fix a benign "return void" that was recently introduced.
Selftests:
* Makefile tweak for dependency generation
* -Wformat fix
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmVzhWMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMd3QgArPrc1tHKb5RAv3/OGxUhgmmKcYFz
AERbxrzcEv25MjCy6wfb+WzOTud/7KM113oVwHpkWbPaOdR/NteCeNrypCOiFnxB
BzKOdm23A8UmjgFlwYpIlukmn51QT2iMWfIQDetDboRpRPlIZ6AOQpIHph99K0J1
xMlXKbd4eaeIS+FoqJGD2wlKDkMZmrQD1SjndLp7xtPjRBZQzVTcMg/fKJNcDLAg
xIfecCeeU4/lJ0fQlnnO5a4L3gCzJnSGLKYvLgBkX4sC1yFr959WAnqSn8mb+1wT
jQtsmCg7+GCuNF5mn4nF/YnnuD7+xgbpGKVGlHhKCmmvmbi74NVm5SBNgA==
=aZLl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Generic:
- Set .owner for various KVM file_operations so that files refcount
the KVM module until KVM is done executing _all_ code, including
the last few instructions of kvm_put_kvm(). And then revert the
misguided attempt to rely on "struct kvm" refcounts to pin
KVM-the-module.
ARM:
- Do not redo the mapping of vLPIs, if they have already been mapped
s390:
- Do not leave bits behind in PTEs
- Properly catch page invalidations that affect the prefix of a
nested guest
x86:
- When checking if a _running_ vCPU is "in-kernel", i.e. running at
CPL0, get the CPL directly instead of relying on
preempted_in_kernel (which is valid if and only if the vCPU was
preempted, i.e. NOT running).
- Fix a benign "return void" that was recently introduced.
Selftests:
- Makefile tweak for dependency generation
- '-Wformat' fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Update EFER software model on CR0 trap for SEV-ES
KVM: selftests: add -MP to CFLAGS
KVM: selftests: Actually print out magic token in NX hugepages skip message
KVM: x86: Remove 'return void' expression for 'void function'
Revert "KVM: Prevent module exit until all VMs are freed"
KVM: Set file_operations.owner appropriately for all such structures
KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode
KVM: arm64: GICv4: Do not perform a map to a mapped vLPI
KVM: s390/mm: Properly reset no-dat
KVM: s390: vsie: fix wrong VIR 37 when MSO is used
Check !val instead of directing checking for NULL (val == NULL).
No functional changes intended.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-7-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of having an array and keeping IDs for each entry of the array,
just have a chip_info struct per device.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-6-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When reading in_voltage_scale we can get something like:
root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146
However, when reading the available options:
root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010
which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.
While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
are done which means we need to properly protect the whole operation so
we are sure we will be in a sane state if two concurrent calls occur.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-3-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make sure functions that return errors are not ignored.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-2-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The reset gpio was being handled with inverted polarity. This means that
as far as gpiolib is concerned we were actually leaving the pin asserted
(in theory, this would mean reset). However, inverting the polarity in
devicetree made things work. Fix it by doing it the proper way and how
gpiolib expects it to be done.
While at it, moved the handling to it's own function and dropped
'reset_gpio' from the 'struct ad9467_state' as we only need it during
probe. On top of that, refactored things so that we now request the gpio
asserted (i.e in reset) and then de-assert it. Also note that we now use
gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
already request the pin as output.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU hotplug
while ftrace is active.
Thanks to: Naveen N Rao
-----BEGIN PGP SIGNATURE-----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=RLG4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU
hotplug while ftrace is active.
Thanks to Naveen N Rao.
* tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ftrace: Fix stack teardown in ftrace_no_trace
- fix an error path after a failed export in sysfs code
-----BEGIN PGP SIGNATURE-----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=Zzhe
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix an error path after a failed export in sysfs code
* tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: sysfs: Fix error handling on failed export
Here are some small USB fixes for 6.7-rc5 to resolve some reported
issues. Included in here are:
- usb gadget f_hid, and uevent fix
- xhci driver revert to resolve a much-reported issue
- typec driver fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZXRuNg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymKGgCfSJN2sDwxrExpdUeNkQr0r1DCQpgAn0sx1j65
uldkw4sWZwv7XuuYbx+b
=aI4T
-----END PGP SIGNATURE-----
Merge tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.7-rc5 to resolve some reported
issues. Included in here are:
- usb gadget f_hid, and uevent fix
- xhci driver revert to resolve a much-reported issue
- typec driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_hid: fix report descriptor allocation
Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
usb: typec: class: fix typec_altmode_put_partner to put plugs
USB: gadget: core: adjust uevent timing on gadget unbind
Here are some small serial driver fixes for 6.7-rc4 to resolve some
reported issues. Included in here are:
- pl011 dma support fix
- sc16is7xx driver fix
- ma35d1 console index fix
- 8250 driver fixes for small issues
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZXRtSQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymdlwCfWxCBdF8hkTzLRH8LvZbjXQgn8NkAn223XULM
rLiYkIrqk2oQBVC7sC0X
=ukSJ
-----END PGP SIGNATURE-----
Merge tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 6.7-rc4 to resolve some
reported issues. Included in here are:
- pl011 dma support fix
- sc16is7xx driver fix
- ma35d1 console index fix
- 8250 driver fixes for small issues
All of these have been in linux-next with no reported issues"
* tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART
serial: ma35d1: Validate console index before assignment
ARM: PL011: Fix DMA support
serial: sc16is7xx: address RX timeout interrupt errata
serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
serial: 8250_omap: Add earlycon support for the AM654 UART controller
serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
