Add ptwrite to the op code map and the perf tools new instructions test.
To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep ptwrite
For information about ptwrite, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/1495180230-19367-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
1/ Replace pcommit with ADR / directed-flushing:
The pcommit instruction, which has not shipped on any product, is
deprecated. Instead, the requirement is that platforms implement either
ADR, or provide one or more flush addresses per nvdimm. ADR
(Asynchronous DRAM Refresh) flushes data in posted write buffers to the
memory controller on a power-fail event. Flush addresses are defined in
ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure:
"Flush Hint Address Structure". A flush hint is an mmio address that
when written and fenced assures that all previous posted writes
targeting a given dimm have been flushed to media.
2/ On-demand ARS (address range scrub):
Linux uses the results of the ACPI ARS commands to track bad blocks
in pmem devices. When latent errors are detected we re-scrub the media
to refresh the bad block list, userspace can also request a re-scrub at
any time.
3/ Support for the Microsoft DSM (device specific method) command format.
4/ Support for EDK2/OVMF virtual disk device memory ranges.
5/ Various fixes and cleanups across the subsystem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xCBG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
- Replace pcommit with ADR / directed-flushing.
The pcommit instruction, which has not shipped on any product, is
deprecated. Instead, the requirement is that platforms implement
either ADR, or provide one or more flush addresses per nvdimm.
ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
to the memory controller on a power-fail event.
Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
A flush hint is an mmio address that when written and fenced assures
that all previous posted writes targeting a given dimm have been
flushed to media.
- On-demand ARS (address range scrub).
Linux uses the results of the ACPI ARS commands to track bad blocks
in pmem devices. When latent errors are detected we re-scrub the
media to refresh the bad block list, userspace can also request a
re-scrub at any time.
- Support for the Microsoft DSM (device specific method) command
format.
- Support for EDK2/OVMF virtual disk device memory ranges.
- Various fixes and cleanups across the subsystem.
* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
nfit: do an ARS scrub on hitting a latent media error
nfit: move to nfit/ sub-directory
nfit, libnvdimm: allow an ARS scrub to be triggered on demand
libnvdimm: register nvdimm_bus devices with an nd_bus driver
pmem: clarify a debug print in pmem_clear_poison
x86/insn: remove pcommit
Revert "KVM: x86: add pcommit support"
nfit, tools/testing/nvdimm/: unify shutdown paths
libnvdimm: move ->module to struct nvdimm_bus_descriptor
nfit: cleanup acpi_nfit_init calling convention
nfit: fix _FIT evaluation memory leak + use after free
tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
tools/testing/nvdimm: add virtual ramdisk range
acpi, nfit: treat virtual ramdisk SPA as pmem region
pmem: kill __pmem address space
pmem: kill wmb_pmem()
libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
fs/dax: remove wmb_pmem()
libnvdimm, pmem: flush posted-write queues on shutdown
...
The pcommit instruction is being deprecated in favor of either ADR
(asynchronous DRAM refresh: flush-on-power-fail) at the platform level, or
posted-write-queue flush addresses as defined by the ACPI 6.x NFIT (NVDIMM
Firmware Interface Table).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support for Intel's AVX-512 instructions to the instruction decoder.
AVX-512 instructions are documented in Intel Architecture Instruction
Set Extensions Programming Reference (February 2016).
AVX-512 instructions are identified by a EVEX prefix which, for the
purpose of instruction decoding, can be treated as though it were a
4-byte VEX prefix.
Existing instructions which can now accept an EVEX prefix need not be
further annotated in the op code map (x86-opcode-map.txt). In the case
of new instructions, the op code map is updated accordingly.
Also add associated Mask Instructions that are used to manipulate mask
registers used in AVX-512 instructions.
The 'perf tools' instruction decoder is updated in a subsequent patch.
And a representative set of instructions is added to the perf tools new
instructions test in a subsequent patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
vcvtph2ps does not have an immediate operand, so remove the erroneous
'Ib' from its opcode map entry. Add vcvtph2ps to the perf tools new
instructions test to verify it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add xsavec, xsaves and xrstors to the op code map and the perf tools new
instructions test. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep 'xsave\|xrst'
For information about xsavec, xsaves and xrstors, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add rdpkru and wrpkru to the op code map and the perf tools new
instructions test. In the case of the test, only the bytes can be
tested at the moment since binutils doesn't support the instructions
yet. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep pkru
For information about rdpkru and wrpkru, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel Architecture Instruction Set Extensions Programing Reference (Oct
2014) describes 3 new memory instructions, namely clflushopt, clwb and
pcommit. Add them to the op code map and the perf tools new
instructions test. e.g.
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins"
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel SHA Extensions are explained in the Intel Architecture
Instruction Set Extensions Programing Reference (Oct 2014).
There are 7 new instructions. Add them to the op code map
and the perf tools new instructions test. e.g.
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep sha
Committer note:
3 lines of details, for the curious:
$ perf test -v "x86 ins" 2>&1 | grep sha256msg1 | tail -3
Decoded ok: 0f 38 cc 84 08 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,1),%xmm0
Decoded ok: 0f 38 cc 84 c8 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,8),%xmm0
Decoded ok: 44 0f 38 cc bc c8 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,8),%xmm15
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The MPX instructions are presently not described in the SDM
opcode maps, and there are not encoding characters for bnd
registers, address method or operand type. So the kernel
opcode map is using 'Gv' for bnd registers and 'Ev' for
everything else. That is fine because the instruction
decoder does not use that information anyway, except as
an indication that there is a ModR/M byte.
Nevertheless, in some cases the 'Gv' and 'Ev' are the wrong
way around, BNDLDX and BNDSTX have 2 operands not 3, and it
wouldn't hurt to identify the mandatory prefixes.
This has no effect on the decoding of valid instructions,
but the addition of the mandatory prefixes will cause some
invalid instructions to error out that wouldn't have
previously.
Note that perf tools has a copy of the instruction decoder
and provides a test for new instructions which includes MPX
instructions e.g.
$ perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ perf test -v "x86 ins"
Commiter notes:
And to see these MPX instructions specifically:
$ perf test -v "x86 ins" 2>&1 | grep bndldx | head -3
Decoded ok: 0f 1a 00 bndldx (%eax),%bnd0
Decoded ok: 0f 1a 05 78 56 34 12 bndldx 0x12345678,%bnd0
Decoded ok: 0f 1a 18 bndldx (%eax),%bnd3
$ perf test -v "x86 ins" 2>&1 | grep bndstx | head -3
Decoded ok: 0f 1b 00 bndstx %bnd0,(%eax)
Decoded ok: 0f 1b 05 78 56 34 12 bndstx %bnd0,0x12345678
Decoded ok: 0f 1b 18 bndstx %bnd3,(%eax)
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds all the MPX instructions to x86 opcode map, so the x86
instruction decoder can decode MPX instructions.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Link: http://lkml.kernel.org/r/1389518403-7715-4-git-send-email-qiaowei.ren@intel.com
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add TSX-NI related instructions and new instructions to
x86-opcode-map.txt according to the Intel(R) 64 and IA-32
Architectures Software Developer's Manual Vol2C (June, 2013).
This also includes below updates.
- Fix a typo of MWAIT (the lack of (11B)).
- Change NOP Ev to prefetchw Ev
- Add CRC32 new prefix style (66&F2)
- Add ADCX, ADOX, RDSEED, CLAC and STAC instructions
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20130806073750.4049.12365.stgit@udc4-manage.rcp.hitachi.co.jp
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Fix the x86 instruction decoder to decode bsr/bsf/jmpe with
operand-size prefix (66h). This fixes the test case failure
reported by Linus, attached below.
bsf/bsr/jmpe have a special encoding. Opcode map in
Intel Software Developers Manual vol2 says they have
TZCNT/LZCNT variants if it has F3h prefix. However, there
is no information if it has other 66h or F2h prefixes.
Current instruction decoder supposes that those are
bad instructions, but it actually accepts at least
operand-size prefixes.
H. Peter Anvin further explains:
" TZCNT/LZCNT are F3 + BSF/BSR exactly because the F2 and
F3 prefixes have historically been no-ops with most instructions.
This allows software to unconditionally use the prefixed versions
and get TZCNT/LZCNT on the processors that have them if they don't
care about the difference. "
This fixes errors reported by test_get_len:
Warning: arch/x86/tools/test_get_len found difference at <em_bsf>:ffffffff81036d87
Warning: ffffffff81036de5: 66 0f bc c2 bsf %dx,%ax
Warning: objdump says 4 bytes, but insn_get_length() says 3
Warning: arch/x86/tools/test_get_len found difference at <em_bsr>:ffffffff81036ea6
Warning: ffffffff81036f04: 66 0f bd c2 bsr %dx,%ax
Warning: objdump says 4 bytes, but insn_get_length() says 3
Warning: decoded and checked 13298882 instructions with 2 warnings
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <yrl.pp-manager.tt@hitachi.com>
Link: http://lkml.kernel.org/r/20120604150911.22338.43296.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/accounting, proc: Fix /proc/stat interrupts sum
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
x86/kprobes: Fix typo transferred from Intel manual
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
x86/kconfig: Move the ZONE_DMA entry under a menu
x86/UV2: Add accounting for BAU strong nacks
x86/UV2: Ack BAU interrupt earlier
x86/UV2: Remove stale no-resources test for UV2 BAU
x86/UV2: Work around BAU bug
x86/UV2: Fix BAU destination timeout initialization
x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
x86: Get rid of dubious one-bit signed bitfield
The Intel documentation at
http://software.intel.com/file/36945
shows the ANDN opcode and Group 17 with encoding f2 and f3 encoding
respectively. The current version of x86-opcode-map.txt shows them
with f3 and f4. Unless someone can point to documentation which shows
the currently used encoding the following patch be applied.
Signed-off-by: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/CAOPLpQdq5SuVo9=023CYhbFLAX9rONyjmYq7jJkqc5xwctW5eA@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The arch/x86/lib/x86-opcode-map.txt file [used by the
kprobes instruction decoder] contains the line:
af: SCAS/W/D/Q rAX,Xv
This is what the Intel manuals show, but it's not correct.
The 'X' stands for:
Memory addressed by the DS:rSI register pair (for example, MOVS, CMPS, OUTS, or LODS).
On the other hand 'Y' means (also see the ae byte entry for
SCASB):
Memory addressed by the ES:rDI register pair (for example, MOVS, CMPS, INS, STOS, or SCAS).
Signed-off-by: Ulrich Drepper <drepper@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/CAOPLpQfytPyDEBF1Hbkpo7ovUerEsstVGxBr%3DEpDL-BKEMaqLA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since new Intel software developers manual introduces
new format for AVX instruction set (including AVX2),
it is important to update x86-opcode-map.txt to fit
those changes.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20111205120557.15475.13236.stgit@cloud
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add Intel AVX(Advanced Vector Extensions) instruction set
support to x86 instruction decoder. This adds insn.vex_prefix
field for storing VEX prefixes, and introduces some original
tags for expressing opcodes attributes.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204226.30545.23451.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix superscripts position because some superscripts of SSE
opcode are not put in correct position.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204204.30545.97296.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add Intel AES opcodes to x86 opcode map. These opcodes are
used in arch/x86/crypt/aesni-intel_asm.S.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap<systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020165531.4145.21872.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add AMD prefetch and 3DNow! opcode including FEMMS. Since 3DNow!
uses the last immediate byte as an opcode extension byte, x86
insn just treats the extenstion byte as an immediate byte
instead of a part of opcode (insn_get_opcode() decodes first
"0x0f 0x0f" bytes.)
Users who are interested in analyzing 3DNow! opcode still can
decode it by analyzing the immediate byte.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000744.16556.27881.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add VIA processor's Padlock instructions(MONTMUL, XSHA1, XSHA256)
as parts of the kernel may use them.
This fixes the following crash in opcodes decoder selftests:
make[2]: `scripts/unifdef' is up to date.
TEST posttest
Error: c145cf71: f3 0f a6 d0 repz xsha256
Error: objdump says 4 bytes, but insn_get_length() says 3 (attr:0)
make[1]: *** [posttest] Error 2
make: *** [bzImage] Error 2
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090925182037.10157.3180.stgit@omoto>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add MMX/SSE instructions to x86 opcode maps, since some of those
instructions are used in the kernel.
This also fixes failures in the x86 instruction decoder seftest.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20090908163246.23516.78835.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add x86 instruction decoder to arch-specific libraries. This decoder
can decode x86 instructions used in kernel into prefix, opcode, modrm,
sib, displacement and immediates. This can also show the length of
instructions.
This version introduces instruction attributes for decoding
instructions.
The instruction attribute tables are generated from the opcode map file
(x86-opcode-map.txt) by the generator script(gen-insn-attr-x86.awk).
Currently, the opcode maps are based on opcode maps in Intel(R) 64 and
IA-32 Architectures Software Developers Manual Vol.2: Appendix.A,
and consist of below two types of opcode tables.
1-byte/2-bytes/3-bytes opcodes, which has 256 elements, are
written as below;
Table: table-name
Referrer: escaped-name
opcode: mnemonic|GrpXXX [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
(or)
opcode: escape # escaped-name
EndTable
Group opcodes, which has 8 elements, are written as below;
GrpTable: GrpXXX
reg: mnemonic [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
EndTable
These opcode maps include a few SSE and FP opcodes (for setup), because
those opcodes are used in the kernel.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203413.31965.49709.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
