Here is the big char/misc/whatever driver changes for 5.6-rc1
Included in here are loads of things from a variety of different driver
subsystems:
- soundwire updates
- binder updates
- nvmem updates
- firmware drivers updates
- extcon driver updates
- various misc driver updates
- fpga driver updates
- interconnect subsystem and driver updates
- bus driver updates
- uio driver updates
- mei driver updates
- w1 driver cleanups
- various other small driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFKeQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynjVACgg6JWfOyPCnz3GfRD1vQZyUl+Hg0An1H+Eh08
+LQk5Qpb3vVwBpCp6qR3
=MB+D
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc/whatever driver changes for 5.6-rc1
Included in here are loads of things from a variety of different
driver subsystems:
- soundwire updates
- binder updates
- nvmem updates
- firmware drivers updates
- extcon driver updates
- various misc driver updates
- fpga driver updates
- interconnect subsystem and driver updates
- bus driver updates
- uio driver updates
- mei driver updates
- w1 driver cleanups
- various other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits)
mei: me: add jasper point DID
char: hpet: Use flexible-array member
binder: fix log spam for existing debugfs file creation.
mei: me: add comet point (lake) H device ids
nvmem: add QTI SDAM driver
dt-bindings: nvmem: add binding for QTI SPMI SDAM
dt-bindings: imx-ocotp: Add i.MX8MP compatible
dt-bindings: soundwire: fix example
soundwire: cadence: fix kernel-doc parameter descriptions
soundwire: intel: report slave_ids for each link to SOF driver
siox: Use the correct style for SPDX License Identifier
w1: omap-hdq: Simplify driver with PM runtime autosuspend
firmware: stratix10-svc: Remove unneeded semicolon
firmware: google: Probe for a GSMI handler in firmware
firmware: google: Unregister driver_info on failure and exit in gsmi
firmware: google: Release devices before unregistering the bus
slimbus: qcom: add missed clk_disable_unprepare in remove
slimbus: Use the correct style for SPDX License Identifier
slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel()
dt-bindings: SLIMBus: add slim devices optional properties
...
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
Use the proper form of the empty initializer when working with
structures that contain an array. Otherwise, older gcc versions (eg gcc
4.9) will complain about this.
Fixes: 1ac210d128 ("bus: fsl-mc: add the fsl_mc_get_endpoint function")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20191204142950.30206-1-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Commit d878970f6c ("bus: ti-sysc: Add separate functions for handling
clocks") separated handling of optional clocks from the main clocks, but
introduced an issue where we do not necessarily allocate a slot for both
fck and ick clocks, but still assume fixed slots for enumerating over the
clocks.
Let's fix the issue by ensuring we always have slots for both fck and ick
even if we don't use ick, and don't attempt to enumerate optional clocks
if not allocated.
In the long run we might want to simplify things a bit by only allocating
space only for the optional clocks as we have only few devices with
optional clocks.
Fixes: d878970f6c ("bus: ti-sysc: Add separate functions for handling clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have dts property for "ti,sysc-delay-us", and we're using it, but the
wait after OCP softreset only happens if devices are probed in legacy mode.
Let's add a delay after writing the OCP softreset when specified.
Fixes: e0db94fe87 ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits")
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 03856e928b ("bus: ti-sysc: Handle mstandby quirk and use it for
musb") added quirk handling for mstandby quirk but did not consider that
we also need a quirk variant for SYSC_QUIRK_FORCE_MSTANDBY.
We need to use forced idle mode for both SYSC_QUIRK_SWSUP_MSTANDBY and
SYSC_QUIRK_FORCE_MSTANDBY, but SYSC_QUIRK_SWSUP_MSTANDBY also need to
additionally also configure no-idle mode when enabled.
Fixes: 03856e928b ("bus: ti-sysc: Handle mstandby quirk and use it for musb")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Just few minor changes that can be merged when suitable, but would
be good to have these in v5.5-rc1 to remove dependencies between branches
for more changes later on in v5.6:
- Add quirk handling for AESS (Audio Engine Sub System)
- We want to drop the useless gptimer option for omap4 as there are local
timers
- A minor error path handling improvment for sysc_child_add_named_clock()
that will make further patching a bit easier
-----BEGIN PGP SIGNATURE-----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=Yb3M
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few ti-sysc related fixes for v5.5 merge window
Just few minor changes that can be merged when suitable, but would
be good to have these in v5.5-rc1 to remove dependencies between branches
for more changes later on in v5.6:
- Add quirk handling for AESS (Audio Engine Sub System)
- We want to drop the useless gptimer option for omap4 as there are local
timers
- A minor error path handling improvment for sysc_child_add_named_clock()
that will make further patching a bit easier
* tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
ARM: OMAP2+: Drop useless gptimer option for omap4
bus: ti-sysc: Add module enable quirk for audio AESS
Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo
-----BEGIN PGP SIGNATURE-----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=dk7w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
Here is the big staging and iio set of patches for the 5.5-rc1 release.
It's the usual huge collection of cleanup patches all over the
drivers/staging/ area, along with a new staging driver, and a bunch of
new IIO drivers as well.
Full details are in the shortlog, but all of these have been in
linux-next for a long time with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6lVQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylFnwCgyvZ62uUyQTRey0zvNTe3I4fY9L4AnAnrz3ZC
U6ZA2+Uj3O6qhAr5frRu
=uv8S
-----END PGP SIGNATURE-----
Merge tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / iio updates from Greg KH:
"Here is the big staging and iio set of patches for the 5.5-rc1
release.
It's the usual huge collection of cleanup patches all over the
drivers/staging/ area, along with a new staging driver, and a bunch of
new IIO drivers as well.
Full details are in the shortlog, but all of these have been in
linux-next for a long time with no reported issues"
* tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits)
staging: vchiq: Have vchiq_dump_* functions return an error code
staging: vchiq: Refactor indentation in vchiq_dump_* functions
staging: fwserial: Fix Kconfig indentation (seven spaces)
staging: vchiq_dump: Replace min with min_t
staging: vchiq: Fix block comment format in vchiq_dump()
staging: octeon: indent with tabs instead of spaces
staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error
staging: most: core: remove sysfs attr remove_link
staging: vc04: Fix Kconfig indentation
staging: pi433: Fix Kconfig indentation
staging: nvec: Fix Kconfig indentation
staging: most: Fix Kconfig indentation
staging: fwserial: Fix Kconfig indentation
staging: fbtft: Fix Kconfig indentation
fbtft: Drop OF dependency
fbtft: Make use of device property API
fbtft: Drop useless #ifdef CONFIG_OF and dead code
fbtft: Describe function parameters in kernel-doc
fbtft: Make sure string is NULL terminated
staging: rtl8723bs: remove set but not used variable 'change', 'pos'
...
Add a jump target so that a call of the function “clk_put”
can be better reused at the end of this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We must set the autogating bit on enable for AESS (Audio Engine SubSystem)
when probed with ti-sysc interconnect target module driver. Otherwise it
won't idle properly.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- check the LOGIC_PIO_INDIRECT region ops at registration instead of
in the IO port accessors to optimise the lib/ligic_pio.c
- add the hisi LPC driver to the build test for the other architectures
except ALPHA, C6X, HEXAGON and PARISC as they do not define {read,write}sb
by updating the hisi LPC Kconfig and adding a dummy PIO_INDIRECT_SIZE
- clean the sparse complains of the hisi LPC driver
- build logic_pio into a lib to avoid including in the vmlinux when not
referenced
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9R8Z
-----END PGP SIGNATURE-----
Merge tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi into arm/drivers
ARM64: hisi: SoC driver updates for 5.5
- check the LOGIC_PIO_INDIRECT region ops at registration instead of
in the IO port accessors to optimise the lib/ligic_pio.c
- add the hisi LPC driver to the build test for the other architectures
except ALPHA, C6X, HEXAGON and PARISC as they do not define {read,write}sb
by updating the hisi LPC Kconfig and adding a dummy PIO_INDIRECT_SIZE
- clean the sparse complains of the hisi LPC driver
- build logic_pio into a lib to avoid including in the vmlinux when not
referenced
* tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi:
logic_pio: Build into a library
bus: hisi_lpc: Expand build test coverage
bus: hisi_lpc: Clean some types
logic_pio: Define PIO_INDIRECT_SIZE for !CONFIG_INDIRECT_PIO
lib: logic_pio: Enforce LOGIC_PIO_INDIRECT region ops are set at registration
Link: https://lore.kernel.org/r/5DC959B9.80301@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Currently the driver will only ever be built for ARM64 because it selects
CONFIG_INDIRECT_PIO, which itself depends on ARM64.
Expand build test coverage for the driver to other architectures by only
selecting CONFIG_INDIRECT_PIO for ARM64, when we really want it.
We don't include ALPHA, C6X, HEXAGON, and PARISC architectures as they
don't define {read, write}sb.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
Note two merge commits in here, both for immutable branches based
of 5.4-rc1.
1. Ti eqep driver because of some file moves in precursor patches.
I suspect no one else will pull this one.
2. ab8500 refactor as changes in power supply, hwmon and mfd trees.
This may come via numerous trees as well as IIO.
Counter subsystem related
* ti eqep
- New device support with bindings.
- Includes prior file move to reflect more general use of ti-pwmss.
* Counter core
- simplify count_read and count_write callbacks + document change.
- fix a typo in docs.
Various subsystems related
* AB8500
- ab8500_btemp driver converted to be an IIO consumer driver.
- ab8500_charger driver converted to be an IIO consumer driver.
- ab8500_fg fuel gauge driver converted to be an IIO consumer driver.
- ab8500 hwmon driver converted to be an IIO consumer driver.
- mfd bindings augmented with the adc channels to make the above work.
- drop original mfd driver.
New device support
* ab8500
- new ADC driver used by the above other subystems via the IIO consumer
interface.
* adux1020 photometric sensor
- new driver and dt bindings.
* fxos877cq
- new driver for this simple(ish) IMU with DT bindings.
* intel_mrfld_adc
- new driver for the ADC found on Intel Merrifield platforms.
* ltc2983
- new driver for this multi-sensor type temperature interface.
Includes complex DT bindings.
* max1027
- support for 12 bit devices, max1227, max1229 and max1231 + add to trivial
bindings.
* st_lsm6dsx
- support for the LSM6DS0 6 axis MEMs sensor.
Note different from the LSM6DSO which the driver already supports *sigh*
- support for the LSM6DSRX 6 axis MEMs sensor.
Features and cleanups
* ad7303
- replace use of core mlock with a local lock with cleanly defined scope.
* ad9834
- add a check for devm_clk_get failing.
* at91-sama5d2
- tidy up a 0 as NULL warning.
* bmp280
- endian type tidy ups.
- use bulk regulator ops for a small reduction in code.
- use devm_add_action... to simplify error path handling.
* exynos
- drop stray semicolon.
- use devm_platform_ioremap_resource to reduce boilerplate.
* hx711
- various tricks to improve the frequency of read out possible.
* max1027
- debugfs support.
- make interrupts optional.
- reset at probe to get clean state.
- refactors to allow addition of new device support.
* maxim thermocouple
- drop an unneeded semicolon.
* mb1232
- yaml binding conversion.
* mcp320x
- tidy up an endian types in cast warning.
* meson_saradc
- use devm_platform_ioremap_resource to reduce boilerplate.
* mpu3050
- make a poison value explicity big endian to supress a warning.
* pulsedlight v2
- endian type tidy ups.
* sgp30
- drop an excess semicolon.
* sps30
- make truncation explicit with masking to clean up a warning.
* st sensors
- drop gpio include as none of these support gpios.
* st_lsm6dsx
- tidy up some alignment issues.
- refactors to allow addition of new device support.
* allow varients of irq related reg definitions.
* avoid accessing active-low, open-drain regs if not provided.
* allow varients of bdu/boot and reset regs.
* allow for enabling or disabling wakeup sources through platform
data (seems someone still uses this).
- enable wake-up events for LSM6DS0
- use the drdy mask to avoid some invalid samples during initial start
of sensor.
- Add support to trim the timestamp.
* stm32_adc
- kernel-doc fixes.
* stm32_dac
- power management support.
* stmpe-adc
- Fix endian type of local variable.
* twl4030
- use false / true instead of 0 / 1 for booleans.
* xilinx-xadc
- use devm_platform_ioremap_resouce to reduce boilerplate.
* zpa2326
- reorganise buffer handling setup to be more consistent.
Fixes (mostly recent additions)
* cpcap-adc
- Fix mising IRQF_ONESHOT that would cause warnings to be printed.
* st_lsm6dsx
- Sanity check the read_fifo pointer is set.
- use locked read and update functions to prevent some races.
- avoid accessing enable_reg if not provided.
- take a lock to prevent a race in updating the config.
- kernel-doc fixes.
- document wakeup-source property in dt binding.
- fix lsm9ds1 gyro gain definitions.
-----BEGIN PGP SIGNATURE-----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=zfsO
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Second set of IIO + counter new device support, features etc for the 5.5 cycle.
Note two merge commits in here, both for immutable branches based
of 5.4-rc1.
1. Ti eqep driver because of some file moves in precursor patches.
I suspect no one else will pull this one.
2. ab8500 refactor as changes in power supply, hwmon and mfd trees.
This may come via numerous trees as well as IIO.
Counter subsystem related
* ti eqep
- New device support with bindings.
- Includes prior file move to reflect more general use of ti-pwmss.
* Counter core
- simplify count_read and count_write callbacks + document change.
- fix a typo in docs.
Various subsystems related
* AB8500
- ab8500_btemp driver converted to be an IIO consumer driver.
- ab8500_charger driver converted to be an IIO consumer driver.
- ab8500_fg fuel gauge driver converted to be an IIO consumer driver.
- ab8500 hwmon driver converted to be an IIO consumer driver.
- mfd bindings augmented with the adc channels to make the above work.
- drop original mfd driver.
New device support
* ab8500
- new ADC driver used by the above other subystems via the IIO consumer
interface.
* adux1020 photometric sensor
- new driver and dt bindings.
* fxos877cq
- new driver for this simple(ish) IMU with DT bindings.
* intel_mrfld_adc
- new driver for the ADC found on Intel Merrifield platforms.
* ltc2983
- new driver for this multi-sensor type temperature interface.
Includes complex DT bindings.
* max1027
- support for 12 bit devices, max1227, max1229 and max1231 + add to trivial
bindings.
* st_lsm6dsx
- support for the LSM6DS0 6 axis MEMs sensor.
Note different from the LSM6DSO which the driver already supports *sigh*
- support for the LSM6DSRX 6 axis MEMs sensor.
Features and cleanups
* ad7303
- replace use of core mlock with a local lock with cleanly defined scope.
* ad9834
- add a check for devm_clk_get failing.
* at91-sama5d2
- tidy up a 0 as NULL warning.
* bmp280
- endian type tidy ups.
- use bulk regulator ops for a small reduction in code.
- use devm_add_action... to simplify error path handling.
* exynos
- drop stray semicolon.
- use devm_platform_ioremap_resource to reduce boilerplate.
* hx711
- various tricks to improve the frequency of read out possible.
* max1027
- debugfs support.
- make interrupts optional.
- reset at probe to get clean state.
- refactors to allow addition of new device support.
* maxim thermocouple
- drop an unneeded semicolon.
* mb1232
- yaml binding conversion.
* mcp320x
- tidy up an endian types in cast warning.
* meson_saradc
- use devm_platform_ioremap_resource to reduce boilerplate.
* mpu3050
- make a poison value explicity big endian to supress a warning.
* pulsedlight v2
- endian type tidy ups.
* sgp30
- drop an excess semicolon.
* sps30
- make truncation explicit with masking to clean up a warning.
* st sensors
- drop gpio include as none of these support gpios.
* st_lsm6dsx
- tidy up some alignment issues.
- refactors to allow addition of new device support.
* allow varients of irq related reg definitions.
* avoid accessing active-low, open-drain regs if not provided.
* allow varients of bdu/boot and reset regs.
* allow for enabling or disabling wakeup sources through platform
data (seems someone still uses this).
- enable wake-up events for LSM6DS0
- use the drdy mask to avoid some invalid samples during initial start
of sensor.
- Add support to trim the timestamp.
* stm32_adc
- kernel-doc fixes.
* stm32_dac
- power management support.
* stmpe-adc
- Fix endian type of local variable.
* twl4030
- use false / true instead of 0 / 1 for booleans.
* xilinx-xadc
- use devm_platform_ioremap_resouce to reduce boilerplate.
* zpa2326
- reorganise buffer handling setup to be more consistent.
Fixes (mostly recent additions)
* cpcap-adc
- Fix mising IRQF_ONESHOT that would cause warnings to be printed.
* st_lsm6dsx
- Sanity check the read_fifo pointer is set.
- use locked read and update functions to prevent some races.
- avoid accessing enable_reg if not provided.
- take a lock to prevent a race in updating the config.
- kernel-doc fixes.
- document wakeup-source property in dt binding.
- fix lsm9ds1 gyro gain definitions.
* tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings
iio: imu: st_lsm6dsx: add support to LSM6DSRX
iio: st: Drop GPIO include
iio: adc: hx711: optimize performance in read cycle
iio: adc: stm32-adc: fix kernel-doc warnings
iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
iio: chemical: sgp30: drop excess semicolon
iio: adc: twl4030: Use false / true instead of 0 / 1 with booleans
dt-bindings: iio: Add ltc2983 documentation
iio: temperature: Add support for LTC2983
iio: pressure: bmp280: use devm action and remove labels from probe
iio: pressure: bmp280: use bulk regulator ops
iio: imu: Add support for the FXOS8700 IMU
dt-bindings: iio: imu: add fxos8700 imu binding
staging: iio: ad9834: add a check for devm_clk_get
iio: adc: xilinx-xadc: use devm_platform_ioremap_resource
iio: temp: maxim thermocouple: Drop unneeded semi colon.
iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler.
iio: adc: meson_saradc: use devm_platform_ioremap_resource
iio: adc: exynos: use devm_platform_ioremap_resource
...
Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can
find its associated endpoint (another object at the other link of a MC
firmware link).
The API will be used in the following patch in order to discover the
connected DPMAC object of a DPNI.
Also, the fsl_mc_device_lookup function is made available to the entire
fsl-mc bus driver and not just for the dprc driver.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export all device types present on the fsl-mc bus in order to be able to
actually use the is_fsl_mc_bus_*() functions from drivers on the bus.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I noticed that when probed with ti-sysc, watchdog can trigger on am3, am4
and dra7 causing a device reset.
Turns out I made several mistakes implementing the watchdog quirk handling:
1. We must do both writes to spr register
2. We must also call the reset quirk on disable
3. On am3 and am4 we need to also set swsup quirk flag
I probably only tested this earlier with watchdog service running when the
watchdog never gets disabled.
Fixes: 4e23be473e ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds a new counter driver for the Texas Instruments Enhanced
Quadrature Encoder Pulse (eQEP) module.
Only very basic functionality is currently implemented - only enough to
be able to read the position. The actual device has many more features
which can be added to the driver on an as-needed basis.
It is not possible to read the QEPA/B signal values in hardware, so
that feature is omitted.
The TI_PWMSS kernel option is selected in Kconfig to enable the parent
bus, which is needed for power management.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The TI PWMSS driver is a simple bus driver for providing power
power management for the PWM peripherals on TI AM33xx SoCs, namely
eCAP, eHRPWM and eQEP. The eQEP is a counter rather than a PWM, so
it does not make sense to have the bus driver in the PWM subsystem
since the PWMSS is not exclusive to PWM devices.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Current implementation for ti-sysc powers down the module once module
init is complete. However, right after power is disabled, it is enabled
via runtime PM. This is unnecessary so avoid it by re-ordering the
events a bit; move powering down of the module post runtime PM enable
which makes sure the use counts are maintained properly and there is
no extra power down/up sequence for the module.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There seems to be unnecessary extra hardreset line toggling applied
during module init. This is unnecessary, as the reset lines are already
asserted during boot, and it can cause certain modules to hang (iommus,
remoteprocs.) Remove the extra hardreset toggle, and remove the now
redundant function to handle this also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The main clocks and reset controls have a hardware level dependency,
where one can't transition state without the other one transitioning.
Because we don't have the dependency implemented in software, we must
ensure the ordering of these two is done properly; they way this is
handled is that clocks transition on software level without delay,
and the status is only polled on reset side. Because of this, we must
re-order the main clock and reset handling on the ti-sysc driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A few fixes that have trickled in through the merge window:
- Video fixes for OMAP due to panel-dpi driver removal
- Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7
- Fixing arch version on ASpeed ast2500
- Two fixes for reset handling on ARM SCMI
-----BEGIN PGP SIGNATURE-----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=s4qF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A few fixes that have trickled in through the merge window:
- Video fixes for OMAP due to panel-dpi driver removal
- Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7
- Fixing arch version on ASpeed ast2500
- Two fixes for reset handling on ARM SCMI"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: aspeed: ast2500 is ARMv6K
reset: reset-scmi: add missing handle initialisation
firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
ARM: dts: am3517-evm: Fix missing video
ARM: dts: logicpd-torpedo-baseboard: Fix missing video
ARM: omap2plus_defconfig: Fix missing video
bus: ti-sysc: Fix handling of invalid clocks
bus: ti-sysc: Fix clock handling for no-idle quirks
Fixes for omap variants
Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.
And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.
* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
ARM: dts: am3517-evm: Fix missing video
ARM: dts: logicpd-torpedo-baseboard: Fix missing video
ARM: omap2plus_defconfig: Fix missing video
bus: ti-sysc: Fix handling of invalid clocks
bus: ti-sysc: Fix clock handling for no-idle quirks
Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This is some material that we picked up into our tree late or
that had complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the most
interesting new additions:
The new Aspeed AST2600 baseboard management controller is added, this
is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
dependencies on other device drivers.
After many years, support for the MMP2 based OLPC XO-1.75 finally makes
it into the kernel.
The Armada 3720 based Turris Mox open source router platform is a late
addition and it follows some preparatory work across multiple branches.
The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of the
now-unused platform data.
The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Qtkp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Arnd Bergmann:
"This is some material that we picked up into our tree late or that had
complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the
most interesting new additions:
- The new Aspeed AST2600 baseboard management controller is added,
this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
had some dependencies on other device drivers.
- After many years, support for the MMP2 based OLPC XO-1.75 finally
makes it into the kernel.
- The Armada 3720 based Turris Mox open source router platform is a
late addition and it follows some preparatory work across multiple
branches.
- The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of
the now-unused platform data.
- The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window"
[ This pull request itself wasn't actually sent late at all by Arnd, but
I waited on the branches that it used to be pulled first, so it ends
up being merged much later than the other ARM SoC pull requests this
merge window - Linus ]
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
ARM: dts: dir685: Drop spi-cpol from the display
ARM: dts: aspeed: Add AST2600 pinmux nodes
ARM: dts: aspeed: Add AST2600 and EVB
ARM: exynos: Enable support for ARM architected timers
ARM: samsung: Fix system restart on S3C6410
ARM: dts: mmp2: add OLPC XO 1.75 machine
ARM: dts: mmp2: rename the USB PHY node
ARM: dts: mmp2: specify reg-shift for the UARTs
ARM: dts: mmp2: add camera interfaces
ARM: dts: mmp2: fix the SPI nodes
ARM: dts: mmp2: trivial whitespace fix
arm64: dts: marvell: add DTS for Turris Mox
dt-bindings: marvell: document Turris Mox compatible
arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
arm64: dts: ti: k3-j721e-main: Add hwspinlock node
arm64: dts: ti: k3-am65-main: Add hwspinlock node
arm64: dts: k3-j721e: Add gpio-keys on common processor board
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
...
The branch contains driver changes that are tightly
connected to SoC specific code. Aside from smaller
cleanups and bug fixes, here is a list of the notable
changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver
for its on-board pluggable extension bus. The
same platform also gains a firmware driver.
- The Samsung Exynos family gains a new Chipid driver
exporting using the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon
chips.
- A firmware driver for the NXP i.MX DSP IPC protocol
using shared memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the
NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for
the S905X3 and A311D chips
- A rework of the TI Davinci framebuffer driver to
allow important cleanups in the platform code
- A couple of device drivers for removed ARM SoC
platforms are removed. Most of the removals were
picked up by other maintainers, this contains
whatever was left.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
//5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
+bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
PYZ2UpqUeX8cdvggqUUU
=lxFi
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This contains driver changes that are tightly connected to SoC
specific code. Aside from smaller cleanups and bug fixes, here is a
list of the notable changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver for its
on-board pluggable extension bus. The same platform also gains a
firmware driver.
- The Samsung Exynos family gains a new Chipid driver exporting using
the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon chips.
- A firmware driver for the NXP i.MX DSP IPC protocol using shared
memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for the S905X3 and A311D
chips
- A rework of the TI Davinci framebuffer driver to allow important
cleanups in the platform code
- A couple of device drivers for removed ARM SoC platforms are
removed. Most of the removals were picked up by other maintainers,
this contains whatever was left"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
bus: uniphier-system-bus: use devm_platform_ioremap_resource()
soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
firmware: ti_sci: Allow for device shared and exclusive requests
bus: imx-weim: remove incorrect __init annotations
fbdev: remove w90x900/nuc900 platform drivers
spi: remove w90x900 driver
net: remove w90p910-ether driver
net: remove ks8695 driver
firmware: turris-mox-rwtm: Add sysfs documentation
firmware: Add Turris Mox rWTM firmware driver
dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
bus: moxtet: fix unsigned comparison to less than zero
bus: moxtet: remove set but not used variable 'dummy'
ARM: scoop: Use the right include
dt-bindings: power: add Amlogic Everything-Else power domains bindings
soc: amlogic: Add support for Everything-Else power domains controller
fbdev: da8xx: use resource management for dma
fbdev: da8xx-fb: drop a redundant if
fbdev: da8xx-fb: use devm_platform_ioremap_resource()
...
Commit d098913a10 ("bus: ti-sysc: Fix clock handling for no-idle
quirks") fixed handling for no-idle quirk modules that are not enabled
by the bootloader.
But it also caused unpaired clockdomain calls that won't allow idling
the system. That's because clkdm_allow_idle_nolock() and
clkdm_deny_idle_nolock() have usage count with clkdm->forcewake_count.
Let's drop the unpaired sysc_clkdm_deny_idle() to fix idling of devices.
Fixes: d098913a10 ("bus: ti-sysc: Fix clock handling for no-idle quirks")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can currently get "Unable to handle kernel paging request at
virtual address" for invalid clocks with dts node but no driver:
(__clk_get_hw) from [<c0138ebc>] (ti_sysc_find_one_clockdomain+0x18/0x34)
(ti_sysc_find_one_clockdomain) from [<c0138f0c>] (ti_sysc_clkdm_init+0x34/0xdc)
(ti_sysc_clkdm_init) from [<c0584660>] (sysc_probe+0xa50/0x10e8)
(sysc_probe) from [<c065c6ac>] (platform_drv_probe+0x58/0xa8)
Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating
clk_get() with -ENOENT as a proper error. If the clock name is specified
in device tree we must succeed with clk_get() to continue. For modules with
no clock names specified in device tree we will just ignore the clocks.
Fixes: 2b2f7def05 ("bus: ti-sysc: Add support for missing clockdomain handling")
Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Replace the chain of platform_get_resource() and devm_ioremap_resource()
with devm_platform_ioremap_resource().
This allows to remove the local variable for (struct resource *), and
have one function call less.
Link: https://lore.kernel.org/r/20190905032122.26076-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
NFSroot can fail on dra7 when cpsw is probed using ti-sysc interconnect
target module driver as reported by Keerthy.
Device clocks and the interconnect target module may or may not be
enabled by the bootloader on init, but we currently assume the clocks
and module are on from the bootloader for "ti,no-idle" and
"ti,no-idle-on-init" quirks as reported by Grygorii Strashko.
Let's fix the issue by always enabling clocks init, and
never disable them for "ti,no-idle" quirk. For "ti,no-idle-on-init"
quirk, we must decrement the usage count later on to allow PM
runtime to idle the module if requested.
Fixes: 1a5cd7c23c ("bus: ti-sysc: Enable all clocks directly during init to read revision")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Reported-by: Keerthy <j-keerthy@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The probe function is no longer __init, so anything it calls now
must also be available at runtime, as Kbuild points out when building
with clang-9:
WARNING: vmlinux.o(.text+0x6e7040): Section mismatch in reference from the function weim_probe() to the function .init.text:imx_weim_gpr_setup()
The function weim_probe() references
the function __init imx_weim_gpr_setup().
This is often because weim_probe lacks a __init
annotation or the annotation of imx_weim_gpr_setup is wrong.
WARNING: vmlinux.o(.text+0x6e70f0): Section mismatch in reference from the function weim_probe() to the function .init.text:weim_timing_setup()
The function weim_probe() references
the function __init weim_timing_setup().
This is often because weim_probe lacks a __init
annotation or the annotation of weim_timing_setup is wrong.
Remove the remaining __init markings that are now wrong.
Fixes: 4a92f07816 ("bus: imx-weim: use module_platform_driver()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently the size_t variable res is being checked for
an error failure however the unsigned variable is never
less than zero so this test is always false. Fix this by
making variable res ssize_t
Link: https://lore.kernel.org/r/20190822010351.15660-2-marek.behun@nic.cz
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 5bc7f990cd ("bus: Add support for Moxtet bus")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/bus/moxtet.c: In function moxtet_remove:
drivers/bus/moxtet.c:822:6: warning: variable dummy set but not used
[-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20190822010351.15660-3-marek.behun@nic.cz
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for Turris Mox board (Armada 3720 SoC based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXW5eNQAKCRALBhiOFHI7
1aqnAJsGU/B3GFbhiuwI4+l3In7TMVVpIgCbB1T/eo1RJhvh9kH9zMj641Rmsk0=
=B8dQ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu into arm/late
mvebu dt64 for 5.4 (part 2)
Add support for Turris Mox board (Armada 3720 SoC based)
* tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu: (53 commits)
arm64: dts: marvell: add DTS for Turris Mox
dt-bindings: marvell: document Turris Mox compatible
arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply
arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes
arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes
arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes
arm64: dts: marvell: Add CP110 COMPHY clocks
arm64: dts: marvell: armada-37xx: add mailbox node
dt-bindings: gpio: Document GPIOs via Moxtet bus
drivers: gpio: Add support for GPIOs over Moxtet bus
bus: moxtet: Add sysfs and debugfs documentation
dt-bindings: bus: Document moxtet bus binding
bus: Add support for Moxtet bus
reset: Add support for resets provided by SCMI
firmware: arm_scmi: Add RESET protocol in SCMI v2.0
dt-bindings: arm: Extend SCMI to support new reset protocol
firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels
...
Link: https://lore.kernel.org/r/87h85two0r.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few changes mostly to deal with sgx SoC glue quirk for omap36xx that
is needed for the related sgx SoC glue dts branch. The other changes
are to simplify sysc_check_one_child() sysc_check_children() to be void
functions, and detect d2d module when debugging is enabled.
-----BEGIN PGP SIGNATURE-----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=UBeA
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late
more ti-sysc driver changes for omap variants for v5.4
Few changes mostly to deal with sgx SoC glue quirk for omap36xx that
is needed for the related sgx SoC glue dts branch. The other changes
are to simplify sysc_check_one_child() sysc_check_children() to be void
functions, and detect d2d module when debugging is enabled.
* tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Detect d2d when debug is enabled
bus: ti-sysc: Add module enable quirk for SGX on omap36xx
bus: ti-sysc: Change return types of functions
Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few changes to prepare for using a reset driver for PRM rstctrl mostly
to deal with the clocks for reset. Then few minor clean-up patches and
SPDX license identifier changes, and add a MAINTAINERs file entry.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl1gZLgRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXNj5A/9F56FliHXmFRCsVw1vja5bgWagmOVnptx
Xa0K29GanTx/cuTaUi5Cp+EPJSDYV2REp2J8jK9jfycEEm9ww3MovFCXJIYeUha3
URMsyd9PctoQyfYdgqfTFs/4HE6NUjCFRjegZWN4K+A0vCx6x5xli7565QTrk0iL
/Eok6oCA3tZkG3cBHn7ZNYahf0NNTlKhYe2Mq2TsJTgROymQ5I9SaCHPSIgdWuH3
v0ysCyQnCNc9QLRLLdy2qnk1k5T/Mf04CMlUs8OIClm1d9cl0Wox83sQemaC5oLZ
lpLBQYyuojob4rK2T2u4c6xNPrrDKltJufB0SyDuYBj30rCCPE/I3GwWZ9tjxcC0
OHq8r+PTdGASyD0H5RfXkXRQARUDuQqt8DQR6lwSnhcCz8pUooDrhGY4+44ynbwg
/tBfKrEr1PcFMnN28Htz+djSqzTB7GNa4XINV87SNmnKuEFQ/nE/CPW7/McVK7Dx
WsRPC/ial+LhUio8dNNML9Ul2+xw46tTxiO0wvMI6nI6NgmDbQ1zOmBMFzN6ze8y
naAJSCA1kP9zeYZ8y/YWio8TTRbdHZznX8nqNXQ6t/UGBMrxaWeHiOulKmz1YlwR
cBHduWwgF6t/qB7qrxwqNddUKcRRIfJA//h0QwieQLdC5EZeq0cUbn4yHMchnCIx
DuOc9DS0NKk=
=RAgR
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late
Driver changes for ti-sysc for v5.4
Few changes to prepare for using a reset driver for PRM rstctrl mostly
to deal with the clocks for reset. Then few minor clean-up patches and
SPDX license identifier changes, and add a MAINTAINERs file entry.
* tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: remove set but not used variable 'quirks'
bus: ti-sysc: allow reset sharing across devices
bus: ti-sysc: rework the reset handling
bus: ti-sysc: re-order the clkdm control around reset handling
bus: ti-sysc: Add missing kerneldoc comments
bus: ti-sysc: Switch to SPDX license identifier
dt-bindings: ti-sysc: Add SPDX license identifier
MAINTAINERS: Add ti-sysc files under the OMAP2+ entry
Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Anson Huang to add UID support for i.MX8 SoC and SCU
drivers.
- A series from Daniel Baluta to add DSP IPC driver for communication
between host AP (Linux) and the firmware running on DSP embedded in
i.MX8 SoCs.
- A small fix for GPCv2 error code printing.
- Switch from module_platform_driver_probe() to module_platform_driver()
for imx-weim driver, as we need the driver to probe again when device
is present later.
- Add optional burst clock mode support for imx-weim driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYoCEAAoJEFBXWFqHsHzOkDgH/jWNgp3QR3omPQGX80oM6/ga
3x78GDJyQfzZKWyOJbWz12tzXWlD1fmGIZy7SeuvXlYUbNnE1WU6ARFGDoBpjbew
DOYoPT9x7eJemSdnEE43g2vtspEzb6Afvb7dr78OPaik24eY0dFx90U0tzptmuVY
gXxkAHo2ez6txXTu5Id9Z5Deitukb8NoK/9yyzTeD0oYn2hCooAp5fAl1rKgfLnf
MpG29TCK8dxr/j7tzsbt2nutJJYy1Ybh/0WpOMXnBwdAz20JT7MU87DMil0//Q02
0Es/P2xH7K4r3ca9mupDtXZps2DbnmYJorvxpfHuMXcyq0uxGhl1/zyhTv+LW4c=
=5mGq
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.4:
- A series from Anson Huang to add UID support for i.MX8 SoC and SCU
drivers.
- A series from Daniel Baluta to add DSP IPC driver for communication
between host AP (Linux) and the firmware running on DSP embedded in
i.MX8 SoCs.
- A small fix for GPCv2 error code printing.
- Switch from module_platform_driver_probe() to module_platform_driver()
for imx-weim driver, as we need the driver to probe again when device
is present later.
- Add optional burst clock mode support for imx-weim driver.
* tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpcv2: Print the correct error code
bus: imx-weim: use module_platform_driver()
firmware: imx: Add DSP IPC protocol interface
soc: imx-scu: Add SoC UID(unique identifier) support
bus: imx-weim: optionally enable burst clock mode
firmware: imx: scu-pd: Add IRQSTR_DSP PD range
firmware: imx: scu-pd: Add mu13 b side PD range
firmware: imx: scu-pd: Rename mu PD range to mu_a
soc: imx8: Add i.MX8MM UID(unique identifier) support
soc: imx8: Add i.MX8MQ UID(unique identifier) support
Link: https://lore.kernel.org/r/20190825153237.28829-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One driver to remove a redundant error message in the Allwinner RSB
driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/5PwAKCRDj7w1vZxhR
xUPDAQDCRzdhQef1Ki9OvNcT8o5tbxLK+YcWmmrlLAA4qe2TRQEA1/Um5ZS8s8p5
MKz27KwMjt3PHVc9AoQiEzCHETKb1AA=
=safB
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers
Allwinner drivers patches for 5.4
One driver to remove a redundant error message in the Allwinner RSB
driver.
* tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Remove dev_err() usage after platform_get_irq()
Link: https://lore.kernel.org/r/f9edfc8e-19b7-4b6e-897a-35f3bdcc8643.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
and driver unbind crash
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BnY2
-----END PGP SIGNATURE-----
Merge tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/fixes
Hisilicon fixes for v5.3-rc
- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
and driver unbind crash
* tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi:
bus: hisi_lpc: Add .remove method to avoid driver unbind crash
bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
lib: logic_pio: Add logic_pio_unregister_range()
lib: logic_pio: Avoid possible overlap for unregistering regions
lib: logic_pio: Fix RCU usage
Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Change return type of functions sysc_check_one_child() and
sysc_check_children() from int to void as neither ever returns an error.
Modify call sites of both functions accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Switch from module_platform_driver_probe() to module_platform_driver().
The former is not suitable for booting with device tree as the driver
will be registered before the device and thus won't be probed again
when the device is present.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>