mirror of
https://github.com/torvalds/linux.git
synced 2024-11-27 22:51:35 +00:00
d51f91d262
2648 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Valentin Schneider
|
e284df705c |
sched/topology: Allow sched_asym_cpucapacity to be disabled
While the static key is correctly initialized as being disabled, it will
remain forever enabled once turned on. This means that if we start with an
asymmetric system and hotplug out enough CPUs to end up with an SMP system,
the static key will remain set - which is obviously wrong. We should detect
this and turn off things like misfit migration and capacity aware wakeups.
As Quentin pointed out, having separate root domains makes this slightly
trickier. We could have exclusive cpusets that create an SMP island - IOW,
the domains within this root domain will not see any asymmetry. This means
we can't just disable the key on domain destruction, we need to count how
many asymmetric root domains we have.
Consider the following example using Juno r0 which is 2+4 big.LITTLE, where
two identical cpusets are created: they both span both big and LITTLE CPUs:
asym0 asym1
[ ][ ]
L L B L L B
$ cgcreate -g cpuset:asym0
$ cgset -r cpuset.cpus=0,1,3 asym0
$ cgset -r cpuset.mems=0 asym0
$ cgset -r cpuset.cpu_exclusive=1 asym0
$ cgcreate -g cpuset:asym1
$ cgset -r cpuset.cpus=2,4,5 asym1
$ cgset -r cpuset.mems=0 asym1
$ cgset -r cpuset.cpu_exclusive=1 asym1
$ cgset -r cpuset.sched_load_balance=0 .
(the CPU numbering may look odd because on the Juno LITTLEs are CPUs 0,3-5
and bigs are CPUs 1-2)
If we make one of those SMP (IOW remove asymmetry) by e.g. hotplugging its
big core, we would end up with an SMP cpuset and an asymmetric cpuset - the
static key must remain set, because we still have one asymmetric root domain.
With the above example, this could be done with:
$ echo 0 > /sys/devices/system/cpu/cpu2/online
Which would result in:
asym0 asym1
[ ][ ]
L L B L L
When both SMP and asymmetric cpusets are present, all CPUs will observe
sched_asym_cpucapacity being set (it is system-wide), but not all CPUs
observe asymmetry in their sched domain hierarchy:
per_cpu(sd_asym_cpucapacity, <any CPU in asym0>) == <some SD at DIE level>
per_cpu(sd_asym_cpucapacity, <any CPU in asym1>) == NULL
Change the simple key enablement to an increment, and decrement the key
counter when destroying domains that cover asymmetric CPUs.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hannes@cmpxchg.org
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: qperret@google.com
Cc: tj@kernel.org
Cc: vincent.guittot@linaro.org
Fixes:
|
||
|
Valentin Schneider
|
cd1cb33505 |
sched/topology: Don't try to build empty sched domains
Turns out hotplugging CPUs that are in exclusive cpusets can lead to the
cpuset code feeding empty cpumasks to the sched domain rebuild machinery.
This leads to the following splat:
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 235 Comm: kworker/5:2 Not tainted 5.4.0-rc1-00005-g8d495477d62e #23
Hardware name: ARM Juno development board (r0) (DT)
Workqueue: events cpuset_hotplug_workfn
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969)
lr : build_sched_domains (kernel/sched/topology.c:1966)
Call trace:
build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969)
partition_sched_domains_locked (kernel/sched/topology.c:2250)
rebuild_sched_domains_locked (./include/linux/bitmap.h:370 ./include/linux/cpumask.h:538 kernel/cgroup/cpuset.c:955 kernel/cgroup/cpuset.c:978 kernel/cgroup/cpuset.c:1019)
rebuild_sched_domains (kernel/cgroup/cpuset.c:1032)
cpuset_hotplug_workfn (kernel/cgroup/cpuset.c:3205 (discriminator 2))
process_one_work (./arch/arm64/include/asm/jump_label.h:21 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:114 kernel/workqueue.c:2274)
worker_thread (./include/linux/compiler.h:199 ./include/linux/list.h:268 kernel/workqueue.c:2416)
kthread (kernel/kthread.c:255)
ret_from_fork (arch/arm64/kernel/entry.S:1167)
Code: f860dae2 912802d6 aa1603e1 12800000 (f8616853)
The faulty line in question is:
cap = arch_scale_cpu_capacity(cpumask_first(cpu_map));
and we're not checking the return value against nr_cpu_ids (we shouldn't
have to!), which leads to the above.
Prevent generate_sched_domains() from returning empty cpumasks, and add
some assertion in build_sched_domains() to scream bloody murder if it
happens again.
The above splat was obtained on my Juno r0 with the following reproducer:
$ cgcreate -g cpuset:asym
$ cgset -r cpuset.cpus=0-3 asym
$ cgset -r cpuset.mems=0 asym
$ cgset -r cpuset.cpu_exclusive=1 asym
$ cgcreate -g cpuset:smp
$ cgset -r cpuset.cpus=4-5 smp
$ cgset -r cpuset.mems=0 smp
$ cgset -r cpuset.cpu_exclusive=1 smp
$ cgset -r cpuset.sched_load_balance=0 .
$ echo 0 > /sys/devices/system/cpu/cpu4/online
$ echo 0 > /sys/devices/system/cpu/cpu5/online
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hannes@cmpxchg.org
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: qperret@google.com
Cc: tj@kernel.org
Cc: vincent.guittot@linaro.org
Fixes:
|
||
Linus Torvalds
|
328fefadd9 |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar: "Two fixes: a guest-cputime accounting fix, and a cgroup bandwidth quota precision fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/vtime: Fix guest/system mis-accounting on task switch sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision |
||
Frederic Weisbecker
|
68e7a4d66b |
sched/vtime: Fix guest/system mis-accounting on task switch
vtime_account_system() assumes that the target task to account cputime
to is always the current task. This is most often true indeed except on
task switch where we call:
vtime_common_task_switch(prev)
vtime_account_system(prev)
Here prev is the scheduling-out task where we account the cputime to. It
doesn't match current that is already the scheduling-in task at this
stage of the context switch.
So we end up checking the wrong task flags to determine if we are
accounting guest or system time to the previous task.
As a result the wrong task is used to check if the target is running in
guest mode. We may then spuriously account or leak either system or
guest time on task switch.
Fix this assumption and also turn vtime_guest_enter/exit() to use the
task passed in parameter as well to avoid future similar issues.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpengli@tencent.com>
Fixes:
|
||
Xuewei Zhang
|
4929a4e6fa |
sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision
The quota/period ratio is used to ensure a child task group won't get
more bandwidth than the parent task group, and is calculated as:
normalized_cfs_quota() = [(quota_us << 20) / period_us]
If the quota/period ratio was changed during this scaling due to
precision loss, it will cause inconsistency between parent and child
task groups.
See below example:
A userspace container manager (kubelet) does three operations:
1) Create a parent cgroup, set quota to 1,000us and period to 10,000us.
2) Create a few children cgroups.
3) Set quota to 1,000us and period to 10,000us on a child cgroup.
These operations are expected to succeed. However, if the scaling of
147/128 happens before step 3, quota and period of the parent cgroup
will be changed:
new_quota: 1148437ns, 1148us
new_period: 11484375ns, 11484us
And when step 3 comes in, the ratio of the child cgroup will be
104857, which will be larger than the parent cgroup ratio (104821),
and will fail.
Scaling them by a factor of 2 will fix the problem.
Tested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Xuewei Zhang <xueweiz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Phil Auld <pauld@redhat.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes:
|
||
|
Linus Torvalds
|
e524d16e7e |
copy-struct-from-user-v5.4-rc2
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXZZIgQAKCRCRxhvAZXjc orNOAP98B2nmoxvq8d5Z6PhoyTBC5NIUuJ5h2YMwcX/hAaj5uQEA58NTKtPmOPDR 2ffUFFerGZ2+brlHgACa0ZKdH27TjAA= =QryD -----END PGP SIGNATURE----- Merge tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull copy_struct_from_user() helper from Christian Brauner: "This contains the copy_struct_from_user() helper which got split out from the openat2() patchset. It is a generic interface designed to copy a struct from userspace. The helper will be especially useful for structs versioned by size of which we have quite a few. This allows for backwards compatibility, i.e. an extended struct can be passed to an older kernel, or a legacy struct can be passed to a newer kernel. For the first case (extended struct, older kernel) the new fields in an extended struct can be set to zero and the struct safely passed to an older kernel. The most obvious benefit is that this helper lets us get rid of duplicate code present in at least sched_setattr(), perf_event_open(), and clone3(). More importantly it will also help to ensure that users implementing versioning-by-size end up with the same core semantics. This point is especially crucial since we have at least one case where versioning-by-size is used but with slighly different semantics: sched_setattr(), perf_event_open(), and clone3() all do do similar checks to copy_struct_from_user() while rt_sigprocmask(2) always rejects differently-sized struct arguments. With this pull request we also switch over sched_setattr(), perf_event_open(), and clone3() to use the new helper" * tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: usercopy: Add parentheses around assignment in test_copy_struct_from_user perf_event_open: switch to copy_struct_from_user() sched_setattr: switch to copy_struct_from_user() clone3: switch to copy_struct_from_user() lib: introduce copy_struct_from_user() helper |
||
Peter Zijlstra
|
73956fc07d |
membarrier: Fix RCU locking bug caused by faulty merge
The following commit: |
||
Aleksa Sarai
|
dff3a85fec |
sched_setattr: switch to copy_struct_from_user()
Switch sched_setattr() syscall from it's own copying struct sched_attr
from userspace to the new dedicated copy_struct_from_user() helper.
The change is very straightforward, and helps unify the syscall
interface for struct-from-userspace syscalls. Ideally we could also
unify sched_getattr(2)-style syscalls as well, but unfortunately the
correct semantics for such syscalls are much less clear (see [1] for
more detail). In future we could come up with a more sane idea for how
the syscall interface should look.
[1]: commit
|
||
|
Linus Torvalds
|
9c5efe9ae7 |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar: - Apply a number of membarrier related fixes and cleanups, which fixes a use-after-free race in the membarrier code - Introduce proper RCU protection for tasks on the runqueue - to get rid of the subtle task_rcu_dereference() interface that was easy to get wrong - Misc fixes, but also an EAS speedup * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Avoid redundant EAS calculation sched/core: Remove double update_max_interval() call on CPU startup sched/core: Fix preempt_schedule() interrupt return comment sched/fair: Fix -Wunused-but-set-variable warnings sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() sched/membarrier: Return -ENOMEM to userspace on memory allocation failure sched/membarrier: Skip IPIs when mm->mm_users == 1 selftests, sched/membarrier: Add multi-threaded test sched/membarrier: Fix p->mm->membarrier_state racy load sched/membarrier: Call sync_core only before usermode for same mm sched/membarrier: Remove redundant check sched/membarrier: Fix private expedited registration check tasks, sched/core: RCUify the assignment of rq->curr tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue tasks: Add a count of task RCU users sched/core: Convert vcpu_is_preempted() from macro to an inline function sched/fair: Remove unused cfs_rq_clock_task() function |
||
Quentin Perret
|
4892f51ad5 |
sched/fair: Avoid redundant EAS calculation
The EAS wake-up path computes the system energy for several CPU
candidates: the CPU with maximum spare capacity in each performance
domain, and the prev_cpu. However, if prev_cpu also happens to be the
CPU with maximum spare capacity in its performance domain, the energy
calculation is still done twice, unnecessarily.
Add a condition to filter out this corner case before doing the energy
calculation.
Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Quentin Perret <qperret@qperret.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: qais.yousef@arm.com
Cc: rjw@rjwysocki.net
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Fixes:
|
||
|
Valentin Schneider
|
9fc41acc89 |
sched/core: Remove double update_max_interval() call on CPU startup
update_max_interval() is called in both CPUHP_AP_SCHED_STARTING's startup and teardown callbacks, but it turns out it's also called at the end of the startup callback of CPUHP_AP_ACTIVE (which is further down the startup sequence). There's no point in repeating this interval update in the startup sequence since the CPU will remain online until it goes down the teardown path. Remove the redundant call in sched_cpu_activate() (CPUHP_AP_ACTIVE). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: juri.lelli@redhat.com Cc: vincent.guittot@linaro.org Link: https://lkml.kernel.org/r/20190923093017.11755-1-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Valentin Schneider
|
a49b4f4012 |
sched/core: Fix preempt_schedule() interrupt return comment
preempt_schedule_irq() is the one that should be called on return from interrupt, clean up the comment to avoid any ambiguity. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-m68k@lists.linux-m68k.org Cc: linux-riscv@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Link: https://lkml.kernel.org/r/20190923143620.29334-2-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Qian Cai
|
763a9ec06c |
sched/fair: Fix -Wunused-but-set-variable warnings
Commit: |
||
KeMeng Shi
|
714e501e16 |
sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
An oops can be triggered in the scheduler when running qemu on arm64: Unable to handle kernel paging request at virtual address ffff000008effe40 Internal error: Oops: 96000007 [#1] SMP Process migration/0 (pid: 12, stack limit = 0x00000000084e3736) pstate: 20000085 (nzCv daIf -PAN -UAO) pc : __ll_sc___cmpxchg_case_acq_4+0x4/0x20 lr : move_queued_task.isra.21+0x124/0x298 ... Call trace: __ll_sc___cmpxchg_case_acq_4+0x4/0x20 __migrate_task+0xc8/0xe0 migration_cpu_stop+0x170/0x180 cpu_stopper_thread+0xec/0x178 smpboot_thread_fn+0x1ac/0x1e8 kthread+0x134/0x138 ret_from_fork+0x10/0x18 __set_cpus_allowed_ptr() will choose an active dest_cpu in affinity mask to migrage the process if process is not currently running on any one of the CPUs specified in affinity mask. __set_cpus_allowed_ptr() will choose an invalid dest_cpu (dest_cpu >= nr_cpu_ids, 1024 in my virtual machine) if CPUS in an affinity mask are deactived by cpu_down after cpumask_intersects check. cpumask_test_cpu() of dest_cpu afterwards is overflown and may pass if corresponding bit is coincidentally set. As a consequence, kernel will access an invalid rq address associate with the invalid CPU in migration_cpu_stop->__migrate_task->move_queued_task and the Oops occurs. The reproduce the crash: 1) A process repeatedly binds itself to cpu0 and cpu1 in turn by calling sched_setaffinity. 2) A shell script repeatedly does "echo 0 > /sys/devices/system/cpu/cpu1/online" and "echo 1 > /sys/devices/system/cpu/cpu1/online" in turn. 3) Oops appears if the invalid CPU is set in memory after tested cpumask. Signed-off-by: KeMeng Shi <shikemeng@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1568616808-16808-1-git-send-email-shikemeng@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Mathieu Desnoyers
|
c172e0a3e8 |
sched/membarrier: Return -ENOMEM to userspace on memory allocation failure
Remove the IPI fallback code from membarrier to deal with very infrequent cpumask memory allocation failure. Use GFP_KERNEL rather than GFP_NOWAIT, and relax the blocking guarantees for the expedited membarrier system call commands, allowing it to block if waiting for memory to be made available. In addition, now -ENOMEM can be returned to user-space if the cpumask memory allocation fails. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-8-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Mathieu Desnoyers
|
c6d68c1c4a |
sched/membarrier: Skip IPIs when mm->mm_users == 1
If there is only a single mm_user for the mm, the private expedited membarrier command can skip the IPIs, because only a single thread is using the mm. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-7-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Mathieu Desnoyers
|
227a4aadc7 |
sched/membarrier: Fix p->mm->membarrier_state racy load
The membarrier_state field is located within the mm_struct, which is not guaranteed to exist when used from runqueue-lock-free iteration on runqueues by the membarrier system call. Copy the membarrier_state from the mm_struct into the scheduler runqueue when the scheduler switches between mm. When registering membarrier for mm, after setting the registration bit in the mm membarrier state, issue a synchronize_rcu() to ensure the scheduler observes the change. In order to take care of the case where a runqueue keeps executing the target mm without swapping to other mm, iterate over each runqueue and issue an IPI to copy the membarrier_state from the mm_struct into each runqueue which have the same mm which state has just been modified. Move the mm membarrier_state field closer to pgd in mm_struct to use a cache line already touched by the scheduler switch_mm. The membarrier_execve() (now membarrier_exec_mmap) hook now needs to clear the runqueue's membarrier state in addition to clear the mm membarrier state, so move its implementation into the scheduler membarrier code so it can access the runqueue structure. Add memory barrier in membarrier_exec_mmap() prior to clearing the membarrier state, ensuring memory accesses executed prior to exec are not reordered with the stores clearing the membarrier state. As suggested by Linus, move all membarrier.c RCU read-side locks outside of the for each cpu loops. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Mike Galbraith <efault@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-5-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Mathieu Desnoyers
|
09554009c0 |
sched/membarrier: Remove redundant check
Checking that the number of threads is 1 is redundant with checking mm_users == 1. No change in functionality intended. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-3-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Mathieu Desnoyers
|
fc0d77387c |
sched/membarrier: Fix private expedited registration check
Fix a logic flaw in the way membarrier_register_private_expedited() handles ready state checks for private expedited sync core and private expedited registrations. If a private expedited membarrier registration is first performed, and then a private expedited sync_core registration is performed, the ready state check will skip the second registration when it really should not. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-2-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Eric W. Biederman
|
5311a98fef |
tasks, sched/core: RCUify the assignment of rq->curr
The current task on the runqueue is currently read with rcu_dereference(). To obtain ordinary RCU semantics for an rcu_dereference() of rq->curr it needs to be paired with rcu_assign_pointer() of rq->curr. Which provides the memory barrier necessary to order assignments to the task_struct and the assignment to rq->curr. Unfortunately the assignment of rq->curr in __schedule is a hot path, and it has already been show that additional barriers in that code will reduce the performance of the scheduler. So I will attempt to describe below why you can effectively have ordinary RCU semantics without any additional barriers. The assignment of rq->curr in init_idle is a slow path called once per cpu and that can use rcu_assign_pointer() without any concerns. As I write this there are effectively two users of rcu_dereference() on rq->curr. There is the membarrier code in kernel/sched/membarrier.c that only looks at "->mm" after the rcu_dereference(). Then there is task_numa_compare() in kernel/sched/fair.c. My best reading of the code shows that task_numa_compare only access: "->flags", "->cpus_ptr", "->numa_group", "->numa_faults[]", "->total_numa_faults", and "->se.cfs_rq". The code in __schedule() essentially does: rq_lock(...); smp_mb__after_spinlock(); next = pick_next_task(...); rq->curr = next; context_switch(prev, next); At the start of the function the rq_lock/smp_mb__after_spinlock pair provides a full memory barrier. Further there is a full memory barrier in context_switch(). This means that any task that has already run and modified itself (the common case) has already seen two memory barriers before __schedule() runs and begins executing. A task that modifies itself then sees a third full memory barrier pair with the rq_lock(); For a brand new task that is enqueued with wake_up_new_task() there are the memory barriers present from the taking and release the pi_lock and the rq_lock as the processes is enqueued as well as the full memory barrier at the start of __schedule() assuming __schedule() happens on the same cpu. This means that by the time we reach the assignment of rq->curr except for values on the task struct modified in pick_next_task the code has the same guarantees as if it used rcu_assign_pointer(). Reading through all of the implementations of pick_next_task it appears pick_next_task is limited to modifying the task_struct fields "->se", "->rt", "->dl". These fields are the sched_entity structures of the varies schedulers. Further "->se.cfs_rq" is only changed in cgroup attach/move operations initialized by userspace. Unless I have missed something this means that in practice that the users of "rcu_dereference(rq->curr)" get normal RCU semantics of rcu_dereference() for the fields the care about, despite the assignment of rq->curr in __schedule() ot using rcu_assign_pointer. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20190903200603.GW2349@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Eric W. Biederman
|
154abafc68 |
tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code
Remove work arounds that were written before there was a grace period after tasks left the runqueue in finish_task_switch(). In particular now that there tasks exiting the runqueue exprience a RCU grace period none of the work performed by task_rcu_dereference() excpet the rcu_dereference() is necessary so replace task_rcu_dereference() with rcu_dereference(). Remove the code in rcuwait_wait_event() that checks to ensure the current task has not exited. It is no longer necessary as it is guaranteed that any running task will experience a RCU grace period after it leaves the run queueue. Remove the comment in rcuwait_wake_up() as it is no longer relevant. Ref: |
||
|
Eric W. Biederman
|
0ff7b2cfba |
tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue
In the ordinary case today the RCU grace period for a task_struct is triggered when another process wait's for it's zombine and causes the kernel to call release_task(). As the waiting task has to receive a signal and then act upon it before this happens, typically this will occur after the original task as been removed from the runqueue. Unfortunaty in some cases such as self reaping tasks it can be shown that release_task() will be called starting the grace period for task_struct long before the task leaves the runqueue. Therefore use put_task_struct_rcu_user() in finish_task_switch() to guarantee that the there is a RCU lifetime after the task leaves the runqueue. Besides the change in the start of the RCU grace period for the task_struct this change may cause perf_event_delayed_put and trace_sched_process_free. The function perf_event_delayed_put boils down to just a WARN_ON for cases that I assume never show happen. So I don't see any problem with delaying it. The function trace_sched_process_free is a trace point and thus visible to user space. Occassionally userspace has the strangest dependencies so this has a miniscule chance of causing a regression. This change only changes the timing of when the tracepoint is called. The change in timing arguably gives userspace a more accurate picture of what is going on. So I don't expect there to be a regression. In the case where a task self reaps we are pretty much guaranteed that the RCU grace period is delayed. So we should get quite a bit of coverage in of this worst case for the change in a normal threaded workload. So I expect any issues to turn up quickly or not at all. I have lightly tested this change and everything appears to work fine. Inspired-by: Linus Torvalds <torvalds@linux-foundation.org> Inspired-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87r24jdpl5.fsf_-_@x220.int.ebiederm.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Nicholas Piggin
|
13224794cb |
mm: remove quicklist page table caches
Patch series "mm: remove quicklist page table caches". A while ago Nicholas proposed to remove quicklist page table caches [1]. I've rebased his patch on the curren upstream and switched ia64 and sh to use generic versions of PTE allocation. [1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com This patch (of 3): Remove page table allocator "quicklists". These have been around for a long time, but have not got much traction in the last decade and are only used on ia64 and sh architectures. The numbers in the initial commit look interesting but probably don't apply anymore. If anybody wants to resurrect this it's in the git history, but it's unhelpful to have this code and divergent allocator behaviour for minor archs. Also it might be better to instead make more general improvements to page allocator if this is still so slow. Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
84da111de0 |
hmm related patches for 5.4
This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a cleanup
to the page walker API and a few memremap related changes round out the
series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of drivers by
using a refcount get/put attachment idiom and remove the convoluted
mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its only
user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without providing
a struct device
- Make walk_page_range() and related use a constant structure for function
pointers
-----BEGIN PGP SIGNATURE-----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=FRGg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a
cleanup to the page walker API and a few memremap related changes
round out the series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
and make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of
drivers by using a refcount get/put attachment idiom and remove the
convoluted mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its
only user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without
providing a struct device
- Make walk_page_range() and related use a constant structure for
function pointers"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
libnvdimm: Enable unit test infrastructure compile checks
mm, notifier: Catch sleeping/blocking for !blockable
kernel.h: Add non_block_start/end()
drm/radeon: guard against calling an unpaired radeon_mn_unregister()
csky: add missing brackets in a macro for tlb.h
pagewalk: use lockdep_assert_held for locking validation
pagewalk: separate function pointers from iterator data
mm: split out a new pagewalk.h header from mm.h
mm/mmu_notifiers: annotate with might_sleep()
mm/mmu_notifiers: prime lockdep
mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
mm/hmm: hmm_range_fault() infinite loop
mm/hmm: hmm_range_fault() NULL pointer bug
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
mm/mmu_notifiers: remove unregister_no_release
RDMA/odp: remove ib_ucontext from ib_umem
RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
...
|
||
|
Linus Torvalds
|
77dcfe2b9e |
Power management updates for 5.4-rc1
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching
governor for virtualized guests wanting to do guest-side polling
in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li,
Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling
typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard
Crestez, MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl2ArZ4SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxgfYQAK80hs43vWQDmp7XKrN4pQe8+qYULAGO
fBfrFl+NG9y/cnuqnt3NtA8MoyNsMMkMLkpkEDMfSbYqqH5ehEzX5+uGJWiWx8+Y
oH5KU8MH7Tj/utYaalGzDt0AHfHZDIGC0NCUNQJVtE/4mOANFabwsCwscp4MrD5Q
WjFN8U4BrsmWgJdZ/U9QIWcDZ0I+1etCF+rZG2yxSv31FMq2Zk/Qm4YyobqCvQFl
TR9rxl08wqUmIYIz5cDjt/3AKH7NLLDqOTstbCL7cmufM5XPFc1yox69xc89UrIa
4AMgmDp7SMwFG/gdUPof0WQNmx7qxmiRAPleAOYBOZW/8jPNZk2y+RhM5NeF72m7
AFqYiuxqatkSb4IsT8fLzH9IUZOdYr8uSmoMQECw+MHdApaKFjFV8Lb/qx5+AwkD
y7pwys8dZSamAjAf62eUzJDWcEwkNrujIisGrIXrVHb7ISbweskMOmdAYn9p4KgP
dfRzpJBJ45IaMIdbaVXNpg3rP7Apfs7X1X+/ZhG6f+zHH3zYwr8Y81WPqX8WaZJ4
qoVCyxiVWzMYjY2/1lzjaAdqWojPWHQ3or3eBaK52DouyG3jY6hCDTLwU7iuqcCX
jzAtrnqrNIKufvaObEmqcmYlIIOFT7QaJCtGUSRFQLfSon8fsVSR7LLeXoAMUJKT
JWQenuNaJngK
=TBDQ
-----END PGP SIGNATURE-----
Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a rework of the main suspend-to-idle code flow (related
to the handling of spurious wakeups), a switch over of several users
of cpufreq notifiers to QoS-based limits, a new devfreq driver for
Tegra20, a new cpuidle driver and governor for virtualized guests, an
extension of the wakeup sources framework to expose wakeup sources as
device objects in sysfs, and more.
Specifics:
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching governor
for virtualized guests wanting to do guest-side polling in the idle
loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel
Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling typos
in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski)"
* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
cpuidle-haltpoll: do not set an owner to allow modunload
cpuidle-haltpoll: return -ENODEV on modinit failure
cpuidle-haltpoll: set haltpoll as preferred governor
cpuidle: allow governor switch on cpuidle_register_driver()
PM: runtime: Documentation: add runtime_status ABI document
pm-graph: make setVal unbuffered again for python2 and python3
powercap: idle_inject: Use higher resolution for idle injection
cpuidle: play_idle: Increase the resolution to usec
cpuidle-haltpoll: vcpu hotplug support
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
...
|
||
|
Linus Torvalds
|
7f2444d38f |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
|
||
|
Qian Cai
|
dac9f027b1 |
sched/fair: Remove unused cfs_rq_clock_task() function
cfs_rq_clock_task() was first introduced and used in: |
||
Rafael J. Wysocki
|
ca61a72ac3 |
Merge branch 'pm-cpufreq'
* pm-cpufreq: (36 commits) cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events sched/cpufreq: Align trace event behavior of fast switching ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier video: pxafb: Remove cpufreq policy notifier video: sa1100fb: Remove cpufreq policy notifier arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY cpufreq: powerpc_cbe: Switch to QoS requests for freq limits cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits cpufreq: Print driver name if cpufreq_suspend() fails cpufreq: mediatek: Add support for mt8183 cpufreq: mediatek: change to regulator_get_optional cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading ... |
||
|
Rafael J. Wysocki
|
2cdd5cc703 |
Merge branch 'pm-cpuidle'
* pm-cpuidle: cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpuidle: teo: Get rid of redundant check in teo_update() cpuidle: teo: Allow tick to be stopped if PM QoS is used cpuidle: menu: Allow tick to be stopped if PM QoS is used cpuidle: header file stubs must be "static inline" cpuidle-haltpoll: disable host side polling when kvm virtualized cpuidle: add haltpoll governor governors: unify last_state_idx cpuidle: add poll_limit_ns to cpuidle_device structure add cpuidle-haltpoll driver |
||
|
Linus Torvalds
|
7e67a85999 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.
As perf and the scheduler is getting bigger and more complex,
document the status quo of current responsibilities and interests,
and spread the review pain^H^H^H^H fun via an increase in the Cc:
linecount generated by scripts/get_maintainer.pl. :-)
- Add another series of patches that brings the -rt (PREEMPT_RT) tree
closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
into a new CONFIG_PREEMPTION category that will allow the eventual
introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
to go though.
- Extend the CPU cgroup controller with uclamp.min and uclamp.max to
allow the finer shaping of CPU bandwidth usage.
- Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).
- Improve the behavior of high CPU count, high thread count
applications running under cpu.cfs_quota_us constraints.
- Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.
- Improve CPU isolation housekeeping CPU allocation NUMA locality.
- Fix deadline scheduler bandwidth calculations and logic when cpusets
rebuilds the topology, or when it gets deadline-throttled while it's
being offlined.
- Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
setscheduler() system calls without creating global serialization.
Add new synchronization between cpuset topology-changing events and
the deadline acceptance tests in setscheduler(), which were broken
before.
- Rework the active_mm state machine to be less confusing and more
optimal.
- Rework (simplify) the pick_next_task() slowpath.
- Improve load-balancing on AMD EPYC systems.
- ... and misc cleanups, smaller fixes and improvements - please see
the Git log for more details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
sched/psi: Correct overly pessimistic size calculation
sched/fair: Speed-up energy-aware wake-ups
sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
sched/uclamp: Update CPU's refcount on TG's clamp changes
sched/uclamp: Use TG's clamps to restrict TASK's clamps
sched/uclamp: Propagate system defaults to the root group
sched/uclamp: Propagate parent clamps
sched/uclamp: Extend CPU's cgroup controller
sched/topology: Improve load balancing on AMD EPYC systems
arch, ia64: Make NUMA select SMP
sched, perf: MAINTAINERS update, add submaintainers and reviewers
sched/fair: Use rq_lock/unlock in online_fair_sched_group
cpufreq: schedutil: fix equation in comment
sched: Rework pick_next_task() slow-path
sched: Allow put_prev_task() to drop rq->lock
sched/fair: Expose newidle_balance()
sched: Add task_struct pointer to sched_class::set_curr_task
sched: Rework CPU hotplug task selection
sched/{rt,deadline}: Fix set_next_task vs pick_next_task
sched: Fix kerneldoc comment for ia64_set_curr_task
...
|
||
|
Linus Torvalds
|
94d18ee934 |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"This cycle's RCU changes were:
- A few more RCU flavor consolidation cleanups.
- Updates to RCU's list-traversal macros improving lockdep usability.
- Forward-progress improvements for no-CBs CPUs: Avoid ignoring
incoming callbacks during grace-period waits.
- Forward-progress improvements for no-CBs CPUs: Use ->cblist
structure to take advantage of others' grace periods.
- Also added a small commit that avoids needlessly inflicting
scheduler-clock ticks on callback-offloaded CPUs.
- Forward-progress improvements for no-CBs CPUs: Reduce contention on
->nocb_lock guarding ->cblist.
- Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass
list to further reduce contention on ->nocb_lock guarding ->cblist.
- Miscellaneous fixes.
- Torture-test updates.
- minor LKMM updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
MAINTAINERS: Update from paulmck@linux.ibm.com to paulmck@kernel.org
rcu: Don't include <linux/ktime.h> in rcutiny.h
rcu: Allow rcu_do_batch() to dynamically adjust batch sizes
rcu/nocb: Don't wake no-CBs GP kthread if timer posted under overload
rcu/nocb: Reduce __call_rcu_nocb_wake() leaf rcu_node ->lock contention
rcu/nocb: Reduce nocb_cb_wait() leaf rcu_node ->lock contention
rcu/nocb: Advance CBs after merge in rcutree_migrate_callbacks()
rcu/nocb: Avoid synchronous wakeup in __call_rcu_nocb_wake()
rcu/nocb: Print no-CBs diagnostics when rcutorture writer unduly delayed
rcu/nocb: EXP Check use and usefulness of ->nocb_lock_contended
rcu/nocb: Add bypass callback queueing
rcu/nocb: Atomic ->len field in rcu_segcblist structure
rcu/nocb: Unconditionally advance and wake for excessive CBs
rcu/nocb: Reduce ->nocb_lock contention with separate ->nocb_gp_lock
rcu/nocb: Reduce contention at no-CBs invocation-done time
rcu/nocb: Reduce contention at no-CBs registry-time CB advancement
rcu/nocb: Round down for number of no-CBs grace-period kthreads
rcu/nocb: Avoid ->nocb_lock capture by corresponding CPU
rcu/nocb: Avoid needless wakeups of no-CBs grace-period kthread
rcu/nocb: Make __call_rcu_nocb_wake() safe for many callbacks
...
|
||
Ingo Molnar
|
563c4f85f9 |
Merge branch 'sched/rt' into sched/core, to pick up -rt changes
Pick up the first couple of patches working towards PREEMPT_RT. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Miles Chen
|
4adcdcea71 |
sched/psi: Correct overly pessimistic size calculation
When passing a equal or more then 32 bytes long string to psi_write(), psi_write() copies 31 bytes to its buf and overwrites buf[30] with '\0'. Which makes the input string 1 byte shorter than it should be. Fix it by copying sizeof(buf) bytes when nbytes >= sizeof(buf). This does not cause problems in normal use case like: "some 500000 10000000" or "full 500000 10000000" because they are less than 32 bytes in length. /* assuming nbytes == 35 */ char buf[32]; buf_size = min(nbytes, (sizeof(buf) - 1)); /* buf_size = 31 */ if (copy_from_user(buf, user_buf, buf_size)) return -EFAULT; buf[buf_size - 1] = '\0'; /* buf[30] = '\0' */ Before: %cd /proc/pressure/ %echo "123456789|123456789|123456789|1234" > memory [ 22.473497] nbytes=35,buf_size=31 [ 22.473775] 123456789|123456789|123456789| (print 30 chars) %sh: write error: Invalid argument %echo "123456789|123456789|123456789|1" > memory [ 64.916162] nbytes=32,buf_size=31 [ 64.916331] 123456789|123456789|123456789| (print 30 chars) %sh: write error: Invalid argument After: %cd /proc/pressure/ %echo "123456789|123456789|123456789|1234" > memory [ 254.837863] nbytes=35,buf_size=32 [ 254.838541] 123456789|123456789|123456789|1 (print 31 chars) %sh: write error: Invalid argument %echo "123456789|123456789|123456789|1" > memory [ 9965.714935] nbytes=32,buf_size=32 [ 9965.715096] 123456789|123456789|123456789|1 (print 31 chars) %sh: write error: Invalid argument Also remove the superfluous parentheses. Signed-off-by: Miles Chen <miles.chen@mediatek.com> Cc: <linux-mediatek@lists.infradead.org> Cc: <wsd_upstream@mediatek.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190912103452.13281-1-miles.chen@mediatek.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Quentin Perret
|
eb92692b25 |
sched/fair: Speed-up energy-aware wake-ups
EAS computes the energy impact of migrating a waking task when deciding
on which CPU it should run. However, the current approach is known to
have a high algorithmic complexity, which can result in prohibitively
high wake-up latencies on systems with complex energy models, such as
systems with per-CPU DVFS. On such systems, the algorithm complexity is
in O(n^2) (ignoring the cost of searching for performance states in the
EM) with 'n' the number of CPUs.
To address this, re-factor the EAS wake-up path to compute the energy
'delta' (with and without the task) on a per-performance domain basis,
rather than system-wide, which brings the complexity down to O(n).
No functional changes intended.
Test results
~~~~~~~~~~~~
* Setup: Tested on a Google Pixel 3, with a Snapdragon 845 (4+4 CPUs,
A55/A75). Base kernel is 5.3-rc5 + Pixel3 specific patches. Android
userspace, no graphics.
* Test case: Run a periodic rt-app task, with 16ms period, ramping down
from 70% to 10%, in 5% steps of 500 ms each (json avail. at [1]).
Frequencies of all CPUs are pinned to max (using scaling_min_freq
CPUFreq sysfs entries) to reduce variability. The time to run
select_task_rq_fair() is measured using the function profiler
(/sys/kernel/debug/tracing/trace_stat/function*). See the test script
for more details [2].
Test 1:
I hacked the DT to 'fake' per-CPU DVFS. That is, we end up with one
CPUFreq policy per CPU (8 policies in total). Since all frequencies are
pinned to max for the test, this should have no impact on the actual
frequency selection, but it does in the EAS calculation.
+---------------------------+----------------------------------+
| Without patch | With patch |
+-----+-----+----------+----------+-----+-----------------+----------+
| CPU | Hit | Avg (us) | s^2 (us) | Hit | Avg (us) | s^2 (us) |
|-----+-----+----------+----------+-----+-----------------+----------+
| 0 | 274 | 38.303 | 1750.239 | 401 | 14.126 (-63.1%) | 146.625 |
| 1 | 197 | 49.529 | 1695.852 | 314 | 16.135 (-67.4%) | 167.525 |
| 2 | 142 | 34.296 | 1758.665 | 302 | 14.133 (-58.8%) | 130.071 |
| 3 | 172 | 31.734 | 1490.975 | 641 | 14.637 (-53.9%) | 139.189 |
| 4 | 316 | 7.834 | 178.217 | 425 | 5.413 (-30.9%) | 20.803 |
| 5 | 447 | 8.424 | 144.638 | 556 | 5.929 (-29.6%) | 27.301 |
| 6 | 581 | 14.886 | 346.793 | 456 | 5.711 (-61.6%) | 23.124 |
| 7 | 456 | 10.005 | 211.187 | 997 | 4.708 (-52.9%) | 21.144 |
+-----+-----+----------+----------+-----+-----------------+----------+
* Hit, Avg and s^2 are as reported by the function profiler
Test 2:
I also ran the same test with a normal DT, with 2 CPUFreq policies, to
see if this causes regressions in the most common case.
+---------------------------+----------------------------------+
| Without patch | With patch |
+-----+-----+----------+----------+-----+-----------------+----------+
| CPU | Hit | Avg (us) | s^2 (us) | Hit | Avg (us) | s^2 (us) |
|-----+-----+----------+----------+-----+-----------------+----------+
| 0 | 345 | 22.184 | 215.321 | 580 | 18.635 (-16.0%) | 146.892 |
| 1 | 358 | 18.597 | 200.596 | 438 | 12.934 (-30.5%) | 104.604 |
| 2 | 359 | 25.566 | 200.217 | 397 | 10.826 (-57.7%) | 74.021 |
| 3 | 362 | 16.881 | 200.291 | 718 | 11.455 (-32.1%) | 102.280 |
| 4 | 457 | 3.822 | 9.895 | 757 | 4.616 (+20.8%) | 13.369 |
| 5 | 344 | 4.301 | 7.121 | 594 | 5.320 (+23.7%) | 18.798 |
| 6 | 472 | 4.326 | 7.849 | 464 | 5.648 (+30.6%) | 22.022 |
| 7 | 331 | 4.630 | 13.937 | 408 | 5.299 (+14.4%) | 18.273 |
+-----+-----+----------+----------+-----+-----------------+----------+
* Hit, Avg and s^2 are as reported by the function profiler
In addition to these two tests, I also ran 50 iterations of the Lisa
EAS functional test suite [3] with this patch applied on Arm Juno r0,
Arm Juno r2, Arm TC2 and Hikey960, and could not see any regressions
(all EAS functional tests are passing).
[1] https://paste.debian.net/1100055/
[2] https://paste.debian.net/1100057/
[3] https://github.com/ARM-software/lisa/blob/master/lisa/tests/scheduler/eas_behaviour.py
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: qais.yousef@arm.com
Cc: qperret@qperret.net
Cc: rjw@rjwysocki.net
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190912094404.13802-1-qperret@qperret.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
Daniel Vetter
|
312364f353 |
kernel.h: Add non_block_start/end()
In some special cases we must not block, but there's not a spinlock, preempt-off, irqs-off or similar critical section already that arms the might_sleep() debug checks. Add a non_block_start/end() pair to annotate these. This will be used in the oom paths of mmu-notifiers, where blocking is not allowed to make sure there's forward progress. Quoting Michal: "The notifier is called from quite a restricted context - oom_reaper - which shouldn't depend on any locks or sleepable conditionals. The code should be swift as well but we mostly do care about it to make a forward progress. Checking for sleepable context is the best thing we could come up with that would describe these demands at least partially." Peter also asked whether we want to catch spinlocks on top, but Michal said those are less of a problem because spinlocks can't have an indirect dependency upon the page allocator and hence close the loop with the oom reaper. Suggested by Michal Hocko. Link: https://lore.kernel.org/r/20190826201425.17547-4-daniel.vetter@ffwll.ch Acked-by: Christian König <christian.koenig@amd.com> (v1) Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Ingo Molnar
|
1251201c0d |
sched/core: Fix uclamp ABI bug, clean up and robustify sched_read_attr() ABI logic and code
Thadeu Lima de Souza Cascardo reported that 'chrt' broke on recent kernels: $ chrt -p $$ chrt: failed to get pid 26306's policy: Argument list too long and he has root-caused the bug to the following commit increasing sched_attr size and breaking sched_read_attr() into returning -EFBIG: |
||
Daniel Lezcano
|
82e430a6df |
cpuidle: play_idle: Increase the resolution to usec
The play_idle resolution is 1ms. The intel_powerclamp bases the idle duration on jiffies. The idle injection API is also using msec based duration but has no user yet. Unfortunately, msec based time does not fit well when we want to inject idle cycle precisely with shallow idle state. In order to set the scene for the incoming idle injection user, move the precision up to usec when calling play_idle. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Patrick Bellasi
|
0413d7f33e |
sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
The supported clamp indexes are defined in 'enum clamp_id', however, because of the code logic in some of the first utilization clamping series version, sometimes we needed to use 'unsigned int' to represent indices. This is not more required since the final version of the uclamp_* APIs can always use the proper enum uclamp_id type. Fix it with a bulk rename now that we have all the bits merged. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Michal Koutny <mkoutny@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190822132811.31294-7-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Patrick Bellasi
|
babbe170e0 |
sched/uclamp: Update CPU's refcount on TG's clamp changes
On updates of task group (TG) clamp values, ensure that these new values are enforced on all RUNNABLE tasks of the task group, i.e. all RUNNABLE tasks are immediately boosted and/or capped as requested. Do that each time we update effective clamps from cpu_util_update_eff(). Use the *cgroup_subsys_state (css) to walk the list of tasks in each affected TG and update their RUNNABLE tasks. Update each task by using the same mechanism used for cpu affinity masks updates, i.e. by taking the rq lock. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Michal Koutny <mkoutny@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190822132811.31294-6-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Patrick Bellasi
|
3eac870a32 |
sched/uclamp: Use TG's clamps to restrict TASK's clamps
When a task specific clamp value is configured via sched_setattr(2), this
value is accounted in the corresponding clamp bucket every time the task is
{en,de}qeued. However, when cgroups are also in use, the task specific
clamp values could be restricted by the task_group (TG) clamp values.
Update uclamp_cpu_inc() to aggregate task and TG clamp values. Every time a
task is enqueued, it's accounted in the clamp bucket tracking the smaller
clamp between the task specific value and its TG effective value. This
allows to:
1. ensure cgroup clamps are always used to restrict task specific requests,
i.e. boosted not more than its TG effective protection and capped at
least as its TG effective limit.
2. implement a "nice-like" policy, where tasks are still allowed to request
less than what enforced by their TG effective limits and protections
Do this by exploiting the concept of "effective" clamp, which is already
used by a TG to track parent enforced restrictions.
Apply task group clamp restrictions only to tasks belonging to a child
group. While, for tasks in the root group or in an autogroup, system
defaults are still enforced.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-5-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Patrick Bellasi
|
7274a5c1bb |
sched/uclamp: Propagate system defaults to the root group
The clamp values are not tunable at the level of the root task group. That's for two main reasons: - the root group represents "system resources" which are always entirely available from the cgroup standpoint. - when tuning/restricting "system resources" makes sense, tuning must be done using a system wide API which should also be available when control groups are not. When a system wide restriction is available, cgroups should be aware of its value in order to know exactly how much "system resources" are available for the subgroups. Utilization clamping supports already the concepts of: - system defaults: which define the maximum possible clamp values usable by tasks. - effective clamps: which allows a parent cgroup to constraint (maybe temporarily) its descendants without losing the information related to the values "requested" from them. Exploit these two concepts and bind them together in such a way that, whenever system default are tuned, the new values are propagated to (possibly) restrict or relax the "effective" value of nested cgroups. When cgroups are in use, force an update of all the RUNNABLE tasks. Otherwise, keep things simple and do just a lazy update next time each task will be enqueued. Do that since we assume a more strict resource control is required when cgroups are in use. This allows also to keep "effective" clamp values updated in case we need to expose them to user-space. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Michal Koutny <mkoutny@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190822132811.31294-4-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Patrick Bellasi
|
0b60ba2dd3 |
sched/uclamp: Propagate parent clamps
In order to properly support hierarchical resources control, the cgroup delegation model requires that attribute writes from a child group never fail but still are locally consistent and constrained based on parent's assigned resources. This requires to properly propagate and aggregate parent attributes down to its descendants. Implement this mechanism by adding a new "effective" clamp value for each task group. The effective clamp value is defined as the smaller value between the clamp value of a group and the effective clamp value of its parent. This is the actual clamp value enforced on tasks in a task group. Since it's possible for a cpu.uclamp.min value to be bigger than the cpu.uclamp.max value, ensure local consistency by restricting each "protection" (i.e. min utilization) with the corresponding "limit" (i.e. max utilization). Do that at effective clamps propagation to ensure all user-space write never fails while still always tracking the most restrictive values. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Michal Koutny <mkoutny@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190822132811.31294-3-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Patrick Bellasi
|
2480c09313 |
sched/uclamp: Extend CPU's cgroup controller
The cgroup CPU bandwidth controller allows to assign a specified
(maximum) bandwidth to the tasks of a group. However this bandwidth is
defined and enforced only on a temporal base, without considering the
actual frequency a CPU is running on. Thus, the amount of computation
completed by a task within an allocated bandwidth can be very different
depending on the actual frequency the CPU is running that task.
The amount of computation can be affected also by the specific CPU a
task is running on, especially when running on asymmetric capacity
systems like Arm's big.LITTLE.
With the availability of schedutil, the scheduler is now able
to drive frequency selections based on actual task utilization.
Moreover, the utilization clamping support provides a mechanism to
bias the frequency selection operated by schedutil depending on
constraints assigned to the tasks currently RUNNABLE on a CPU.
Giving the mechanisms described above, it is now possible to extend the
cpu controller to specify the minimum (or maximum) utilization which
should be considered for tasks RUNNABLE on a cpu.
This makes it possible to better defined the actual computational
power assigned to task groups, thus improving the cgroup CPU bandwidth
controller which is currently based just on time constraints.
Extend the CPU controller with a couple of new attributes uclamp.{min,max}
which allow to enforce utilization boosting and capping for all the
tasks in a group.
Specifically:
- uclamp.min: defines the minimum utilization which should be considered
i.e. the RUNNABLE tasks of this group will run at least at a
minimum frequency which corresponds to the uclamp.min
utilization
- uclamp.max: defines the maximum utilization which should be considered
i.e. the RUNNABLE tasks of this group will run up to a
maximum frequency which corresponds to the uclamp.max
utilization
These attributes:
a) are available only for non-root nodes, both on default and legacy
hierarchies, while system wide clamps are defined by a generic
interface which does not depends on cgroups. This system wide
interface enforces constraints on tasks in the root node.
b) enforce effective constraints at each level of the hierarchy which
are a restriction of the group requests considering its parent's
effective constraints. Root group effective constraints are defined
by the system wide interface.
This mechanism allows each (non-root) level of the hierarchy to:
- request whatever clamp values it would like to get
- effectively get only up to the maximum amount allowed by its parent
c) have higher priority than task-specific clamps, defined via
sched_setattr(), thus allowing to control and restrict task requests.
Add two new attributes to the cpu controller to collect "requested"
clamp values. Allow that at each non-root level of the hierarchy.
Keep it simple by not caring now about "effective" values computation
and propagation along the hierarchy.
Update sysctl_sched_uclamp_handler() to use the newly introduced
uclamp_mutex so that we serialize system default updates with cgroup
relate updates.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
Matt Fleming
|
a55c7454a8 |
sched/topology: Improve load balancing on AMD EPYC systems
SD_BALANCE_{FORK,EXEC} and SD_WAKE_AFFINE are stripped in sd_init()
for any sched domains with a NUMA distance greater than 2 hops
(RECLAIM_DISTANCE). The idea being that it's expensive to balance
across domains that far apart.
However, as is rather unfortunately explained in:
commit
|
||
Liangyan
|
5e2d2cc258 |
sched/fair: Don't assign runtime for throttled cfs_rq
do_sched_cfs_period_timer() will refill cfs_b runtime and call
distribute_cfs_runtime to unthrottle cfs_rq, sometimes cfs_b->runtime
will allocate all quota to one cfs_rq incorrectly, then other cfs_rqs
attached to this cfs_b can't get runtime and will be throttled.
We find that one throttled cfs_rq has non-negative
cfs_rq->runtime_remaining and cause an unexpetced cast from s64 to u64
in snippet:
distribute_cfs_runtime() {
runtime = -cfs_rq->runtime_remaining + 1;
}
The runtime here will change to a large number and consume all
cfs_b->runtime in this cfs_b period.
According to Ben Segall, the throttled cfs_rq can have
account_cfs_rq_runtime called on it because it is throttled before
idle_balance, and the idle_balance calls update_rq_clock to add time
that is accounted to the task.
This commit prevents cfs_rq to be assgined new runtime if it has been
throttled until that distribute_cfs_runtime is called.
Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: shanpeic@linux.alibaba.com
Cc: stable@vger.kernel.org
Cc: xlpang@linux.alibaba.com
Fixes:
|
||
Thomas Gleixner
|
3a245c0f11 |
posix-cpu-timers: Move expiry cache into struct posix_cputimers
The expiry cache belongs into the posix_cputimers container where the other cpu timers information is. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20190821192921.014444012@linutronix.de |
||
Douglas RAILLARD
|
77c84dd188 |
sched/cpufreq: Align trace event behavior of fast switching
Fast switching path only emits an event for the CPU of interest, whereas the regular path emits an event for all the CPUs that had their frequency changed, i.e. all the CPUs sharing the same policy. With the current behavior, looking at cpu_frequency event for a given CPU that is using the fast switching path will not give the correct frequency signal. Signed-off-by: Douglas RAILLARD <douglas.raillard@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
8a04c2ee62 |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner: "Handle the worker management in situations where a task is scheduled out on a PI lock contention correctly and schedule a new worker if possible" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Schedule new worker even if PI-blocked |
||
Jason Xing
|
7b2b55da1d |
psi: get poll_work to run when calling poll syscall next time
Only when calling the poll syscall the first time can user receive POLLPRI correctly. After that, user always fails to acquire the event signal. Reproduce case: 1. Get the monitor code in Documentation/accounting/psi.txt 2. Run it, and wait for the event triggered. 3. Kill and restart the process. The question is why we can end up with poll_scheduled = 1 but the work not running (which would reset it to 0). And the answer is because the scheduling side sees group->poll_kworker under RCU protection and then schedules it, but here we cancel the work and destroy the worker. The cancel needs to pair with resetting the poll_scheduled flag. Link: http://lkml.kernel.org/r/1566357985-97781-1-git-send-email-joseph.qi@linux.alibaba.com Signed-off-by: Jason Xing <kerneljasonxing@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Caspar Zhang <caspar@linux.alibaba.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ingo Molnar
|
6c06b66e95 |
Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU and LKMM changes from Paul E. McKenney: - A few more RCU flavor consolidation cleanups. - Miscellaneous fixes. - Updates to RCU's list-traversal macros improving lockdep usability. - Torture-test updates. - Forward-progress improvements for no-CBs CPUs: Avoid ignoring incoming callbacks during grace-period waits. - Forward-progress improvements for no-CBs CPUs: Use ->cblist structure to take advantage of others' grace periods. - Also added a small commit that avoids needlessly inflicting scheduler-clock ticks on callback-offloaded CPUs. - Forward-progress improvements for no-CBs CPUs: Reduce contention on ->nocb_lock guarding ->cblist. - Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass list to further reduce contention on ->nocb_lock guarding ->cblist. - LKMM updates. Signed-off-by: Ingo Molnar <mingo@kernel.org> |