-----BEGIN PGP SIGNATURE-----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=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
Pull misc vfs updates from Al Viro:
"All kinds of misc stuff, without any unifying topic, from various
people.
Neil's d_anon patch, several bugfixes, introduction of kvmalloc
analogue of kmemdup_user(), extending bitfield.h to deal with
fixed-endians, assorted cleanups all over the place..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
alpha: osf_sys.c: use timespec64 where appropriate
alpha: osf_sys.c: fix put_tv32 regression
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
dcache: delete unused d_hash_mask
dcache: subtract d_hash_shift from 32 in advance
fs/buffer.c: fold init_buffer() into init_page_buffers()
fs: fold __inode_permission() into inode_permission()
fs: add RWF_APPEND
sctp: use vmemdup_user() rather than badly open-coding memdup_user()
snd_ctl_elem_init_enum_names(): switch to vmemdup_user()
replace_user_tlv(): switch to vmemdup_user()
new primitive: vmemdup_user()
memdup_user(): switch to GFP_USER
eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget()
eventfd: fold eventfd_ctx_read() into eventfd_read()
eventfd: convert to use anon_inode_getfd()
nfs4file: get rid of pointless include of btrfs.h
uvc_v4l2: clean copyin/copyout up
vme_user: don't use __copy_..._user()
usx2y: don't bother with memdup_user() for 16-byte structure
...
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaNy81AAoJEHm+PkMAQRiGq2YH/1C1so18qErhPosdfeLIXLbA
iC9XcIvkPuMfjDw4EfSWOzhKnzgqGuc8q/Vzz0ulDreNVUb52nBeRy69QgNoZBTB
NkLdrUKBnlArvRhBXToQGW/s1eI/gobuHBJb7/fbpvsUtPYcDE2nUXAEsMlagn5L
BMHNzE3TByaWj0SqJtZAZvaQN2MdWV8ArHBPaC+MtR2C1VJIyl0mT9CdCu2NpTES
+FncKJ6/qplSBNSUJSfYmFLfEKVcQxvHMi1kp9jOGlVjPM3cOPKRpv8x69x/IPoB
3l82AikL+Ju0738oJ0Fp/IhfGUqpXz+FwUz1JmCdrcOby75RHomJuJCUBTtjXA4=
=lYkx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc4' into drm-next
Linux 4.15-rc4
Daniel requested it to fix some messy conflicts.
-----BEGIN PGP SIGNATURE-----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=xoHW
-----END PGP SIGNATURE-----
Merge tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the media subsytem:
- The largest amount of fixes in this series is with regards to
comments that aren't kernel-doc, but start with "/**".
A new check added for 4.15 makes it to produce a *huge* amount of
new warnings (I'm compiling here with W=1). Most of the patches in
this series fix those.
No code changes - just comment changes at the source files
- rc: some fixed in order to better handle RC repetition codes
- v4l-async: use the v4l2_dev from the root notifier when matching
sub-devices
- v4l2-fwnode: Check subdev count after checking port
- ov 13858 and et8ek8: compilation fix with randconfigs
- usbtv: a trivial new USB ID addition
- dibusb-common: don't do DMA on stack on firmware load
- imx274: Fix error handling, add MAINTAINERS entry
- sir_ir: detect presence of port"
* tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (50 commits)
media: imx274: Fix error handling, add MAINTAINERS entry
media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices
media: v4l2-fwnode: Check subdev count after checking port
media: et8ek8: select V4L2_FWNODE
media: ov13858: Select V4L2_FWNODE
media: rc: partial revert of "media: rc: per-protocol repeat period"
media: dvb: i2c transfers over usb cannot be done from stack
media: dvb-frontends: complete kernel-doc markups
media: docs: add documentation for frontend attach info
media: dvb_frontends: fix kernel-doc macros
media: drivers: remove "/**" from non-kernel-doc comments
media: lm3560: add a missing kernel-doc parameter
media: rcar_jpu: fix two kernel-doc markups
media: vsp1: add a missing kernel-doc parameter
media: soc_camera: fix a kernel-doc markup
media: mt2063: fix some kernel-doc warnings
media: radio-wl1273: fix a parameter name at kernel-doc macro
media: s3c-camif: add missing description at s3c_camif_find_format()
media: mtk-vpu: add description for wdt fields at struct mtk_vpu
media: vdec: fix some kernel-doc warnings
...
The KMS API supports enabling a CRTC without any plane. To enable that
use case, we need to start the pipeline when configuring the LIF,
instead of when enabling the first plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the missing MAINTAINERS entry for imx274, fix error handling in driver
probe and unregister the correct control handler in driver remove.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When matching and registering a sub-device from a sub-notifier use the
v4l2_device from the root parent notifier. Using the v4l2_dev stored in
the sub-notifier itself is incorrect as it might not be set.
This can be demonstrated by unbinding and rebinding the adv748x driver
and observing that it fails to probe due to the check !v4l2_dev in
v4l2_device_register_subdev().
# echo 4-0070 > /sys/bus/i2c/drivers/adv748x/unbind
# echo 4-0070 > /sys/bus/i2c/drivers/adv748x/bind
adv748x 4-0070: chip found @ 0xe0 revision 2143
adv748x 4-0070: Failed to probe TXA
adv748x: probe of 4-0070 failed with error -22
Looking at the commit which adds sub-notifiers to V4L2 it looks like
this is the intended behavior of the original commit. With this fix the
adv748x can be re-bound and still function properly.
Fixes: 2cab00bb07 ("media: v4l: async: Allow binding notifiers to sub-devices")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Current implementation of __v4l2_async_notifier_parse_fwnode_endpoints()
checks first whether subdev_count >= subdev_max and only then whether
the port being parsed matches the given port index. This triggers an
error in otherwise valid cases of skipping ports that do not match.
Fix this by moving the check below the port index check.
Fixes: 9ca4653121 ("media: v4l: fwnode: Support generic parsing of graph endpoints in a device")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
v4l2_async_register_subdev_sensor_common() is only provided when
CONFIG_V4L2_FWNODE is enabled, otherwise we get a link failure:
drivers/media/i2c/et8ek8/et8ek8_driver.o: In function `et8ek8_probe':
et8ek8_driver.c:(.text+0x884): undefined reference to `v4l2_async_register_subdev_sensor_common'
This adds a Kconfig 'select' statement like all the other users of
this interface have.
Fixes: d8932f38c1 ("media: et8ek8: Add support for flash and lens devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig.
Fixes: 5fcf092e0c ("[media] ov13858: add support for OV13858 sensor")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since commit d57ea877af ("media: rc: per-protocol repeat period"), most
IR protocols have a lower keyup timeout. This causes problems on the
ite-cir, which has default IR timeout of 200ms.
Since the IR decoders read the trailing space, with a IR timeout of 200ms,
the last keydown will have at least a delay of 200ms. This is more than
the protocol timeout of e.g. rc-6 (which is 164ms). As a result the last
IR will be interpreted as a new keydown event, and we get two keypresses.
Revert the protocol timeout to 250ms, except for cec which needs a timeout
of 550ms.
Fixes: d57ea877af ("media: rc: per-protocol repeat period")
Cc: <stable@vger.kernel.org> # 4.14
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
For the dvb-frontends that are now part of the documentation,
complete the kernel-doc markups, in order for them to be
properly used at the driver's kAPI documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now, the Kernel checks for kernel_doc format issues.
Weird enough, it didn't get any of those troubles. Shssst!
Well, let's fix it, as a preventive way to avoid having
hundreds of new warnings on some next Linux version.
Tested by adding all files under dvb-frontends that have
"/**" on them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several comments are wrongly tagged as kernel-doc, causing
those warnings:
drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq'
drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data'
drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev'
drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch'
drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp'
drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand *
on line 652 - I thought it was a doc line
drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op'
drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module.
on line 301 - I thought it was a doc line
drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb'
drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf'
drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id'
drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface'
drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration
on line 432 - I thought it was a doc line
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen'
drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv'
drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv '
drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei '
drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame
on line 150 - I thought it was a doc line
drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size
on line 356 - I thought it was a doc line
drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size
on line 369 - I thought it was a doc line
drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer
on line 395 - I thought it was a doc line
drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe'
drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw'
drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n'
drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd'
drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i'
drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f'
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb '
drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv'
drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; '
drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state'
drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency'
drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv'
drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv'
drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt'
drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix this warning:
drivers/media/i2c/lm3560.c:69: warning: No description found for parameter 'dev'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On kernel-doc, struct declarations should be declared as "struct foo".
Fix the following warnings:
drivers/media/platform/rcar_jpu.c:265: warning: cannot understand function prototype: 'struct jpu_q_data '
drivers/media/platform/rcar_jpu.c:281: warning: cannot understand function prototype: 'struct jpu_ctx '
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix this warning:
drivers/media/platform/vsp1/vsp1_dl.c:87: warning: No description found for parameter 'has_chain'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Remove this warning:
drivers/media/platform/soc_camera/soc_scale_crop.c:309: warning: Cannot understand * @icd - soc-camera device
on line 309 - I thought it was a doc line
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Fix those warnings:
drivers/media/tuners/mt2063.c:1413: warning: No description found for parameter 'f_ref'
drivers/media/tuners/mt2063.c:1413: warning: Excess function parameter 'f_Ref' description in 'MT2063_fLO_FractionalTerm'
drivers/media/tuners/mt2063.c:1476: warning: Excess function parameter 'f_Avoid' description in 'MT2063_CalcLO2Mult'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Solve those warnings:
drivers/media/radio/radio-wl1273.c:1337: warning: No description found for parameter 'radio'
drivers/media/radio/radio-wl1273.c:1337: warning: Excess function parameter 'core' description in 'wl1273_fm_set_tx_power'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix this warning:
drivers/media/platform/s3c-camif/camif-core.c:112: warning: No description found for parameter 'vp'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix those warnings:
drivers/media/platform/mtk-vpu/mtk_vpu.c:223: warning: No description found for parameter 'wdt'
drivers/media/platform/mtk-vpu/mtk_vpu.c:223: warning: No description found for parameter 'wdt_refcnt'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix those warnings:
drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c:69: warning: No description found for parameter 'reserved'
drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c:175: warning: Excess struct member 'dev' description in 'vdec_vp8_inst'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some struct fields that aren't documented, and some
consts whose comments start with /**, but they aren't kernel-doc
annotations. So, fix it:
drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'hdl'
drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'pad'
drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'format'
drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'int_seq'
drivers/media/i2c/tvp514x.c:219: warning: cannot understand function prototype: 'const struct v4l2_fmtdesc tvp514x_fmt_list[] = '
drivers/media/i2c/tvp514x.c:235: warning: cannot understand function prototype: 'const struct tvp514x_std_info tvp514x_std_list[] = '
drivers/media/i2c/tvp514x.c:941: warning: No description found for parameter 'fmt'
drivers/media/i2c/tvp514x.c:941: warning: Excess function parameter 'format' description in 'tvp514x_set_pad_format'
drivers/media/i2c/tvp514x.c:1208: warning: cannot understand function prototype: 'const struct i2c_device_id tvp514x_id[] = '
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is a bad kernel-doc markup, producing the following warnings:
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:85: warning: bad line: Bits [0-7]: DMA packet size, 188 bytes
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:86: warning: bad line: Bits [16-23]: packets count in block, 128 packets
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:87: warning: bad line: Bits [24-31]: blocks count, 8 blocks
drivers/media/pci/netup_unidvb/netup_unidvb_core.c:89: warning: bad line: For example, value of 375000000 equals to 3 sec
Fix that, and use a list for the bits option, in order for it
to be better format, if we add it to a driver's documentation
file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
as warned:
drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock'
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock_frequency'
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'power_count'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
get rid of the following warnings:
drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'v4l2dev'
drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'ctrl_handler'
drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'debugfs'
drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'audmode'
drivers/media/radio/radio-si476x.c:317: warning: Excess struct member 'kref' description in 'si476x_radio'
drivers/media/radio/radio-si476x.c:317: warning: Excess struct member 'core_lock' description in 'si476x_radio'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned:
drivers/media/dvb-frontends/ix2505v.c:24: warning: cannot understand function prototype: 'int ix2505v_debug; '
drivers/media/dvb-frontends/ix2505v.c:59: warning: No description found for parameter 'state'
drivers/media/dvb-frontends/ix2505v.c:128: warning: No description found for parameter 'fe'
None of the comments there are kernel-doc. So, remove them with:
perl -pi -e 's,\/\*\*,/*,g' drivers/media/dvb-frontends/ix2505v.c
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are a few mistakes on the existing markups:
drivers/media/pci/tw68/tw68-risc.c:32: warning: Cannot understand * @rp pointer to current risc program position
on line 32 - I thought it was a doc line
drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'pci'
drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'buf'
drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'sglist'
drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'top_offset'
drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'bottom_offset'
drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'bpl'
drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'padding'
drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'lines'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Get rid of the following warnings:
drivers/media/platform/pxa_camera.c:247: warning: No description found for parameter 'layout'
drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'buf'
drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'sg'
drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'sglen'
drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'vb' description in 'pxa_init_dma_channel'
drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'dma' description in 'pxa_init_dma_channel'
drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'cibr' description in 'pxa_init_dma_channel'
drivers/media/platform/pxa_camera.c:1029: warning: No description found for parameter 'last_submitted'
drivers/media/platform/pxa_camera.c:1029: warning: No description found for parameter 'last_issued'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned:
drivers/media/pci/sta2x11/sta2x11_vip.c:414: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:442: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:476: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:493: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:524: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:548: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:566: warning: No description found for parameter 'file'
drivers/media/pci/sta2x11/sta2x11_vip.c:566: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:594: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:651: warning: No description found for parameter 'priv'
drivers/media/pci/sta2x11/sta2x11_vip.c:717: warning: No description found for parameter 'priv'
Most of the above are for the unused priv argument.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix those warnings:
drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_num'
drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_den'
drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'val'
drivers/media/i2c/m5mols/m5mols_capture.c:60: warning: No description found for parameter 'info'
drivers/media/i2c/m5mols/m5mols_controls.c:134: warning: No description found for parameter 'info'
drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'data'
drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'length'
drivers/media/i2c/m5mols/m5mols_core.c:124: warning: Excess function parameter 'size' description in 'm5mols_swap_byte'
drivers/media/i2c/m5mols/m5mols_core.c:142: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:241: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:299: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'reg'
drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'mode'
drivers/media/i2c/m5mols/m5mols_core.c:374: warning: No description found for parameter 'info'
drivers/media/i2c/m5mols/m5mols_core.c:429: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:503: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:671: warning: No description found for parameter 'info'
drivers/media/i2c/m5mols/m5mols_core.c:694: warning: No description found for parameter 'info'
drivers/media/i2c/m5mols/m5mols_core.c:798: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'sd'
drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'on'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix those kernel-doc warnings:
drivers/media/platform/exynos4-is/mipi-csis.c:229: warning: No description found for parameter 'clk_frequency'
drivers/media/platform/exynos4-is/mipi-csis.c:229: warning: Excess struct member 'clock_frequency' description in 'csis_state'
drivers/media/platform/exynos4-is/media-dev.c:69: warning: No description found for parameter 'p'
drivers/media/platform/exynos4-is/media-dev.c:160: warning: No description found for parameter 'p'
drivers/media/platform/exynos4-is/media-dev.c:160: warning: No description found for parameter 'on'
drivers/media/platform/exynos4-is/media-dev.c:160: warning: Excess function parameter 'fimc' description in 'fimc_pipeline_s_power'
drivers/media/platform/exynos4-is/media-dev.c:160: warning: Excess function parameter 'state' description in 'fimc_pipeline_s_power'
drivers/media/platform/exynos4-is/media-dev.c:229: warning: No description found for parameter 'ep'
drivers/media/platform/exynos4-is/media-dev.c:260: warning: No description found for parameter 'ep'
drivers/media/platform/exynos4-is/media-dev.c:260: warning: Excess function parameter 'fimc' description in '__fimc_pipeline_close'
drivers/media/platform/exynos4-is/media-dev.c:288: warning: No description found for parameter 'ep'
drivers/media/platform/exynos4-is/media-dev.c:288: warning: Excess function parameter 'pipeline' description in '__fimc_pipeline_s_stream'
drivers/media/platform/exynos4-is/media-dev.c:916: warning: No description found for parameter 'fmd'
drivers/media/platform/exynos4-is/fimc-capture.c:155: warning: No description found for parameter 'ctx'
drivers/media/platform/exynos4-is/fimc-capture.c:868: warning: No description found for parameter 'num_planes'
drivers/media/platform/exynos4-is/fimc-capture.c:1108: warning: No description found for parameter 'fimc'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are no descriptions for some enums, with produces lots
of warnings:
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_LUMA' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_LUMA2' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_LUMA3' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_CHROMA' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_CHROMA2' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_CHROMA3' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_MV_INFO' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_BS_HEADER' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_PROB_BUF' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_RC_INFO' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_RC_CODE' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_RC_CODE2' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_RC_CODE3' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:55: warning: Enum value 'VENC_VP8_VPU_WORK_BUF_MAX' not described in enum 'venc_vp8_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_RC_INFO' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_RC_CODE' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_REC_LUMA' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_REC_CHROMA' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_REF_LUMA' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_REF_CHROMA' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_MV_INFO_1' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_MV_INFO_2' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_SKIP_FRAME' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:51: warning: Enum value 'VENC_H264_VPU_WORK_BUF_MAX' not described in enum 'venc_h264_vpu_work_buf'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:60: warning: Enum value 'H264_BS_MODE_SPS' not described in enum 'venc_h264_bs_mode'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:60: warning: Enum value 'H264_BS_MODE_PPS' not described in enum 'venc_h264_bs_mode'
drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c:60: warning: Enum value 'H264_BS_MODE_FRAME' not described in enum 'venc_h264_bs_mode'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several of kernel-doc warnings:
drivers/media/platform/davinci/vpif_display.c:114: warning: No description found for parameter 'sizes'
drivers/media/platform/davinci/vpif_display.c:165: warning: No description found for parameter 'vq'
drivers/media/platform/davinci/vpif_display.c:165: warning: Excess function parameter 'vb' description in 'vpif_start_streaming'
drivers/media/platform/davinci/vpif_display.c:780: warning: No description found for parameter 'vpif_cfg'
drivers/media/platform/davinci/vpif_display.c:780: warning: No description found for parameter 'chan_cfg'
drivers/media/platform/davinci/vpif_display.c:780: warning: No description found for parameter 'index'
drivers/media/platform/davinci/vpif_display.c:813: warning: No description found for parameter 'vpif_cfg'
drivers/media/platform/davinci/vpif_display.c:813: warning: No description found for parameter 'ch'
drivers/media/platform/davinci/vpif_display.c:813: warning: No description found for parameter 'index'
drivers/media/platform/davinci/vpif_capture.c:121: warning: No description found for parameter 'sizes'
drivers/media/platform/davinci/vpif_capture.c:174: warning: No description found for parameter 'vq'
drivers/media/platform/davinci/vpif_capture.c:174: warning: Excess function parameter 'vb' description in 'vpif_start_streaming'
drivers/media/platform/davinci/vpif_capture.c:636: warning: No description found for parameter 'iface'
drivers/media/platform/davinci/vpif_capture.c:647: warning: No description found for parameter 'ch'
drivers/media/platform/davinci/vpif_capture.c:647: warning: No description found for parameter 'muxmode'
drivers/media/platform/davinci/vpif_capture.c:676: warning: No description found for parameter 'vpif_cfg'
drivers/media/platform/davinci/vpif_capture.c:676: warning: No description found for parameter 'chan_cfg'
drivers/media/platform/davinci/vpif_capture.c:676: warning: No description found for parameter 'input_index'
drivers/media/platform/davinci/vpif_capture.c:712: warning: No description found for parameter 'vpif_cfg'
drivers/media/platform/davinci/vpif_capture.c:712: warning: No description found for parameter 'ch'
drivers/media/platform/davinci/vpif_capture.c:712: warning: No description found for parameter 'index'
drivers/media/platform/davinci/vpif_capture.c:798: warning: No description found for parameter 'std'
drivers/media/platform/davinci/vpif_capture.c:798: warning: Excess function parameter 'std_id' description in 'vpif_g_std'
drivers/media/platform/davinci/vpif_capture.c:940: warning: No description found for parameter 'fmt'
drivers/media/platform/davinci/vpif_capture.c:940: warning: Excess function parameter 'index' description in 'vpif_enum_fmt_vid_cap'
drivers/media/platform/davinci/vpif_capture.c:1750: warning: No description found for parameter 'dev'
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some troubles on kernel-doc markups, as warned:
drivers/media/v4l2-core/v4l2-dv-timings.c:259: warning: No description found for parameter 't1'
drivers/media/v4l2-core/v4l2-dv-timings.c:259: warning: No description found for parameter 't2'
drivers/media/v4l2-core/v4l2-dv-timings.c:259: warning: No description found for parameter 'pclock_delta'
drivers/media/v4l2-core/v4l2-dv-timings.c:259: warning: No description found for parameter 'match_reduced_fps'
drivers/media/v4l2-core/tuner-core.c:242: warning: bad line: internal parameters, like LNA mode
drivers/media/v4l2-core/tuner-core.c:765: warning: No description found for parameter 'mode'
drivers/media/v4l2-core/videobuf2-memops.c:127: warning: cannot understand function prototype: 'const struct vm_operations_struct vb2_common_vm_ops = '
drivers/media/v4l2-core/v4l2-mem2mem.c:190: warning: No description found for parameter 'm2m_dev'
drivers/media/v4l2-core/v4l2-mem2mem.c:291: warning: No description found for parameter 'm2m_ctx'
drivers/media/v4l2-core/videobuf-core.c:233: warning: No description found for parameter 'q'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several parameters there that are named wrong, as
reported by those warnings:
drivers/media/rc/ir-sharp-decoder.c:47: warning: No description found for parameter 'ev'
drivers/media/rc/ir-sharp-decoder.c:47: warning: Excess function parameter 'duration' description in 'ir_sharp_decode'
drivers/media/rc/ir-sanyo-decoder.c:56: warning: No description found for parameter 'ev'
drivers/media/rc/ir-sanyo-decoder.c:56: warning: Excess function parameter 'duration' description in 'ir_sanyo_decode'
drivers/media/rc/ir-xmp-decoder.c:43: warning: No description found for parameter 'ev'
drivers/media/rc/ir-xmp-decoder.c:43: warning: Excess function parameter 'duration' description in 'ir_xmp_decode'
drivers/media/rc/ir-jvc-decoder.c:47: warning: No description found for parameter 'ev'
drivers/media/rc/ir-jvc-decoder.c:47: warning: Excess function parameter 'duration' description in 'ir_jvc_decode'
drivers/media/rc/ir-lirc-codec.c:34: warning: No description found for parameter 'dev'
drivers/media/rc/ir-lirc-codec.c:34: warning: No description found for parameter 'ev'
drivers/media/rc/ir-lirc-codec.c:34: warning: Excess function parameter 'input_dev' description in 'ir_lirc_decode'
drivers/media/rc/ir-lirc-codec.c:34: warning: Excess function parameter 'duration' description in 'ir_lirc_decode'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
V4L2 memory registrations are incompatible with filesystem-dax that
needs the ability to revoke dma access to a mapping at will, or
otherwise allow the kernel to wait for completion of DMA. The
filesystem-dax implementation breaks the traditional solution of
truncate of active file backed mappings since there is no page-cache
page we can orphan to sustain ongoing DMA.
If v4l2 wants to support long lived DMA mappings it needs to arrange to
hold a file lease or use some other mechanism so that the kernel can
coordinate revoking DMA access when the filesystem needs to truncate
mappings.
Link: http://lkml.kernel.org/r/151068940499.7446.12846708245365671207.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 3565fce3a6 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A new usbid of UTV007 is found in a newly bought device.
The usbid is 1f71:3301.
The ID on the chip is:
UTV007
A89029.1
1520L18K1
Both video and audio is tested with the modified usbtv driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
While it would be very cool to have those functions using
kernel-doc markups, the reality right now is that they
don't follow kernel-doc rules, as parameters aren't documented.
So, stop abusing on "/**" markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The function documentation here doesn't follow kernel-doc,
as parameters aren't documented. So, stop abusing on
"/**" markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some parameters aren't correctly identified, as noticed by
those warnings:
drivers/media/rc/ir-nec-decoder.c:49: warning: No description found for parameter 'ev'
drivers/media/rc/ir-nec-decoder.c:49: warning: Excess function parameter 'duration' description in 'ir_nec_decode'
drivers/media/rc/ir-nec-decoder.c:189: warning: Excess function parameter 'raw' description in 'ir_nec_scancode_to_raw'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The comments that start with "/**" aren't kernel-doc stuff.
So, just start them with "/*".
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
