This patch adds the support to maintain error log page for the
nvmet-core.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds nvmet_req based interface to the nvmet-core so that
we can update the error log page. We update error log page in
the request completion path when status is not set to NVME_SC_SUCCESS.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds necessary fields in the target data structures to
support error log page. For a target controller, we add a new error log
field to maintain the error log, at any given point we maintain error
entries equal to NVMET_ERROR_LOG_SLOTS for each controller. In the
following patch, we also update the error log page entry in the I/O
completion path so we introduce a spinlock for synchronization of the
log.
For nvmet_req, we add a new field error_loc to hold the location of
the error in the command when the actual error occurs for each request
and a starting LBA if applicable.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is a preparation patch which removes the nvme common command cdw10
array and replace with individual fields. This is needed for the nvmet
error log page implementation make is error log page entry offset
assignment easier.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When boxes are run near (or to) OOM, we have a problem with the discard
page allocation in nvme. If we fail allocating the special page, we
return busy, and it'll get retried. But since ordering is honored for
dispatch requests, we can keep retrying this same IO and failing. Behind
that IO could be requests that want to free memory, but they never get
the chance.
Allocate a fixed discard page per controller for a safe fallback, and use
that if the initial allocation fails.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add __exit annotation to cleanup helper which is only
called once in the module.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch implements the NVMe over TCP host driver. It can be used to
connect to remote NVMe over Fabrics subsystems over good old TCP/IP.
The driver implements the TP 8000 of how nvme over fabrics capsules and
data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte
stream. nvme-tcp header and data digest are supported as well.
To connect to all NVMe over Fabrics controllers reachable on a given taget
port over TCP use the following command:
nvme connect-all -t tcp -a $IPADDR
This requires the latest version of nvme-cli with TCP support.
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Solganik Alexander <sashas@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch implements the TCP transport driver for the NVMe over Fabrics
target stack. This allows exporting NVMe over Fabrics functionality over
good old TCP/IP.
The driver implements the TP 8000 of how nvme over fabrics capsules and
data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte
stream. nvme-tcp header and data digest are supported as well.
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Solganik Alexander <sashas@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Data digest is a nvme-tcp specific feature, but nothing prevents other
transports reusing the concept so do not associate with tcp transport
solely.
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Header digest is a nvme-tcp specific feature, but nothing prevents other
transports reusing the concept so do not associate with tcp transport
solely.
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet-tcp will implement it to allocate queue commands which
are only known at nvmf connect time (sq size).
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently pblk only check the size of I/O metadata and does not take
into account if this metadata is in a separate buffer or interleaved
in a single metadata buffer.
In reality only the first scenario is supported, where second mode will
break pblk functionality during any IO operation.
This patch prevents pblk to be instantiated in case device only
supports interleaved metadata.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently lightnvm and pblk uses single DMA pool, for which the entry
size always is equal to PAGE_SIZE. The contents of each entry allocated
from the DMA pool consists of a PPA list (8bytes * 64), leaving
56bytes * 64 space for metadata. Since the metadata field can be bigger,
such as 128 bytes, the static size does not cover this use-case.
This patch adds support for I/O metadata above 56 bytes by changing DMA
pool size based on device meta size and allows pblk to use OOB metadata
>=16B.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the geometry of an OCSSD is enumerated using a two step
approach:
First, nvm_register is called, the OCSSD identify command is issued,
and second the geometry sos and csecs values are read either from the
OCSSD identify if it is a 1.2 drive, or from the NVMe namespace data
structure if it is a 2.0 device.
This patch recombines it into a single step, such that nvm_register can
use the csecs and sos fields independent of which version is used. This
enables one to dynamically size the lightnvm subsystem dma pool.
Reviewed-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With gcc 4.1:
drivers/lightnvm/core.c: In function ‘nvm_get_bb_meta’:
drivers/lightnvm/core.c:977: warning: ‘ret’ may be used uninitialized in this function
and
drivers/nvme/host/lightnvm.c: In function ‘nvme_nvm_get_chk_meta’:
drivers/nvme/host/lightnvm.c:580: warning: ‘ret’ may be used uninitialized in this function
Indeed, if (for the former) the number of channels or LUNs is zero, or
(for both) the passed number of chunks is zero, ret will be returned
uninitialized.
Fix this by preinitializing ret to zero.
Fixes: aff3fb18f9 ("lightnvm: move bad block and chunk state logic to core")
Fixes: a294c19945 ("lightnvm: implement get log report chunk helpers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Guenter reported an boot hang issue on HPPA after we default to 0 poll
queues. We have two issues in the queue count calculations:
1) We don't separate the poll queues from the read/write queues. This is
important, since the former doesn't need interrupts.
2) The adjust logic is broken.
Adjust the poll queue count before doing nvme_calc_io_queues(). The poll
queue count is only limited by the IO queue count we were able to get
from the controller, not failures in the IRQ allocation loop. This
leaves nvme_calc_io_queues() just adjusting the read/write queue map.
Reported-by: Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwNpb0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwGwH/00UHnXfxww3ixxz
zwTVDzptA6SPm6s84yJOWatM5fXhPiAltZaHSYF9lzRzNU71NCq7Frhq3fQUIXKM
OxqDn9nfSTWcjWTk2q5n2keyRV/KIn67YX7UgqFc1bO/mqtVjEgNWaMyblhI+e9E
giu1ZXayHr43jK1cDOmGExZubXUq7Vsc9TOlrd+d2SwIqeEP7TCMrPhnHDwCNvX2
UU5dtANpVzGtHaBcr37wJj+L8kODCc0f+PQ3g2ar5jTHst5SLlHp2u0AMRnUmgdi
VkGx+mu/uk8mtwUqMIMqhplklVoqK6LTeLqsY5Xt32SKruw9UqyJGdphLjW2QP/g
MkmA1lI=
=7kaD
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc6' into for-4.21/block
Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the
two corruption fixes. We're going to be overhauling the direct dispatch
path, and we need to do that on top of the changes we made for that
in mainline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A controller may have an internal state that is not able to successfully
process commands for a short duration. In such states, an immediate
command requeue is expected to fail. The driver may exceed its max
retry count, which permanently ends the command in failure when the same
command would succeed after waiting for the controller to be ready.
NVMe ratified TP 4033 provides a delay hint in the completion status
code for failed commands. Implement the retry delay based on the command
completion status and the controller's requested delay.
Note that requeued commands are handled per request_queue, not per
individual request. If multiple commands fail, the controller should
consistently report the desired delay time for retryable commands in
all CQEs, otherwise the requeue list may be kicked too soon.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a cleanup patch which fixes the structure member indentation
introduced by the p2p:
commit c6925093d0 ("nvmet: Optionally use PCI P2P memory").
We don't change any functionality in this patch.
This is needed so that any future members will also follow the uniform
indentation.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds unlikely in the nvmet request completion path for the
status check in the low level function __nvmet_req_complete.
This is helpful in the scenario where host and target connection is
working smoothly.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As for now, we don't care about sq_head pointer updates anyway, so
at least allow the controller to micro-optimize by omiting this update.
Note that we will probably need to support it when a controller
that requires this comes along.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Technical Proposal introduces an indication for SQ flow control
disable support. Expose it since we are able to operate in this mode.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only override the allowed parts of it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[hch: slight tweak to the NVME_TREQ_SECURE_CHANNEL_MASK definition]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Technical proposal 8005 "fabrics SQ flow control" introduces a mode
where a host and controller agree to omit sq_head pointer updates
when sending nvme completions.
In case the host indicated desire to operate in this mode (connect attribute)
the controller will return back a connect completion with sq_head value
of 0xffff as indication that it will omit sq_head pointer updates.
This mode saves us an atomic update in the I/O path.
Reviewed-by: Hannes Reinecke <hare@suse.com>
[hch: suggested better implementation]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All target lldd's call the cmd receive and op completions in non-isr
thread contexts. As such the IN_ISR options are not necessary.
Remove the functionality and flags, which also removes cpu assignments
to queues.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add functions to find connections requesting Discovery Change events
and send a notification to hosts that maintain an explicit persistent
connection and have and active Asynchronous Event Request pending.
Only Hosts that have access to the Subsystem effected by the change
will receive notifications of Discovery Change event.
Call these functions each time there is a configfs change that effects
the Discover Log Pages.
Set the OAES field in the Identify Controller response to advertise the
support for Asynchronous Event Notifications.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Phil Cayton <phil.cayton@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is perfectly valid that a host connects to a discovery subsystem
and gets an empty discovery log page since no subsystems are
provisioned to it. No reason to disallow connecting to the discovery
subsystem all together.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Phil Cayton <phil.cayton@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add custom get/set features to commands allowed by Discovery controllers.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add AEN/AER values as defined by the specification
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make common process of get/set features available to other controllers by
making simple functions static inline and others not static and prototypes
in nvmet.h file
Also remove static from nvmet_execute_async_event and add prototype to
nvmet.h to allow used by other controllers
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Per change to specification allowing Discovery controllers to have
explicit persistent connections, remove restriction on Discovery
controllers allowing kato on connect.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Functions nvmet_aen_disabled and nvmet_clear_aen were using
values not bit numbers ie 1 << 9 not 9 for bit function clear_bit
and test_and_set_bit.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Phil Cayton <phil.cayton@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move nvmet_aen_disabled and nvmet_clear_aen in preparation for other types
of controllers to use, initially the discovery controller.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch optimizes read command behavior when file-ns configured
with buffered I/O. Instead of offloading the buffered I/O read operations
to the worker threads, we first issue the read operation with IOCB_NOWAIT
and try and access the data from the cache. Here we only offload the
request to the worker thread and complete the request in the worker
thread context when IOCB_NOWAIT request fails.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A controller that supports traffic based keep-alive can restart the keep
alive timer even when no keep-alive was not received in the kato period
as long as other admin or I/O commands were received. For each command
set ctrl->cmd_seen to true, and when keep-alive timer expires, if any
commands were seen, resched ka_work instead of escalating to a fatal
error.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the controller supports traffic based keep alive, we restart the keep
alive timer if any admin or io commands was completed during the kato
period. This prevents a possible starvation of keep alive commands in
the presence of heavy traffic as in such case, we already have a health
indication from the host perspective.
Only set a comp_seen indicator in case the controller supports keep
alive to minimize the overhead for pci controllers.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We get the controller attributes in identify, cache them as we'll need
them for traffic based keep alive support.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We are growing more controller attributes, so use a proper enumeration
for it. For now just add the 128-bit hostid which we support.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of directly poking into the struct device add a new numa_node
field to struct nvme_ctrl. This allows fabrics drivers where ctrl->dev
is a virtual device to support NUMA affinity as well.
Also expose the field as a sysfs attribute, and populate it for the
RDMA and FC transports.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In function nvme_setup_cmd() we call command specific setup function
for flush, rw, and discard. Instead of calling memset in each function
lets call it once in the parent function.
This is purely code cleanup patch and it does not change any existing
functionality.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet_rdma_release_rsp() may free the response before using it at error
flow.
Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Delete operations are seeing NULL pointer references in call_timer_fn.
Tracking these back, the timer appears to be the keep alive timer.
nvme_keep_alive_work() which is tied to the timer that is cancelled
by nvme_stop_keep_alive(), simply starts the keep alive io but doesn't
wait for it's completion. So nvme_stop_keep_alive() only stops a timer
when it's pending. When a keep alive is in flight, there is no timer
running and the nvme_stop_keep_alive() will have no affect on the keep
alive io. Thus, if the io completes successfully, the keep alive timer
will be rescheduled. In the failure case, delete is called, the
controller state is changed, the nvme_stop_keep_alive() is called while
the io is outstanding, and the delete path continues on. The keep
alive happens to successfully complete before the delete paths mark it
as aborted as part of the queue termination, so the timer is restarted.
The delete paths then tear down the controller, and later on the timer
code fires and the timer entry is now corrupt.
Fix by validating the controller state before rescheduling the keep
alive. Testing with the fix has confirmed the condition above was hit.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This avoids having to have differnet mq_ops for different setups
with or without poll queues.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ->poll_fn has been stale for a while, as a lot of places check for mq
ops. But there is no real point in it anyway, as we don't even use
the multipath code for subsystems without multiple ports, which is usually
what we do high performance I/O to. If it really becomes an issue we
should rework the nvme code to also skip the multipath code for any
private namespace, even if that could mean some trouble when rescanning.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code was always a bit of a hack that digs far too much into
RDMA core internals. Lets kick it out and reimplement proper
dedicated poll queues as needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we can't poll regular, interrupt driven I/O queues there
is almost nothing that can race with an interrupt. The only
possible other contexts polling a CQ are the error handler and
queue shutdown, and both are so far off in the slow path that
we can simply use the big hammer of disabling interrupts.
With that we can stop taking the cq_lock for normal queues.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the last place outside of nvme_irq that handles CQEs from
interrupt context, and thus is in the way of removing the cq_lock for
normal queues, and avoiding lockdep warnings on the poll queues, for
which we already take it without IRQ disabling.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the opcode for the delete SQ/CQ command as an argument instead of
the somewhat confusing pass loop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have three places that can poll for I/O completions on a normal
interrupt-enabled queue. All of them are in slow path code, so
consolidate them to a single helper that uses spin_lock_irqsave and
removes the fast path cqe_pending check.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This will allow us to simplify both the regular NVMe interrupt handler
and the upcoming aio poll code. In addition to that the separate
queues are generally a good idea for performance reasons.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a bit flag to mark if the SQ was allocated from the CMB, and clean
up the surrounding code a bit.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This gets rid of all the messing with cq_vector and the ->polled field
by using an atomic bitop to mark the queue enabled or not.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Having another indirect all in the fast path doesn't really help
in our post-spectre world. Also having too many queue type is just
going to create confusion, so I'd rather manage them centrally.
Note that the queue type naming and ordering changes a bit - the
first index now is the default queue for everything not explicitly
marked, the optional ones are read and poll queues.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwEZdIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAlQH/19oax2Za3IPqF4X
DM3lal5M6zlUVkoYstqzpbR3MqUwgEnMfvoeMDC6mI9N4/+r2LkV7cRR8HzqQCCS
jDfD69IzRGb52VSeJmbOrkxBWsR1Nn0t4Z3rEeLPxwaOoNpRc8H973MbAQ2FKMpY
S4Y3jIK1dNiRRxdh52NupVkQF+djAUwkBuVk/rrvRJmTDij4la03cuCDAO+Di9lt
GHlVvygKw2SJhDR+z3ArwZNmE0ceCcE6+W7zPHzj2KeWuKrZg22kfUD454f2YEIw
FG0hu9qecgtpYCkLSm2vr4jQzmpsDoyq3ZfwhjGrP4qtvPC3Db3vL3dbQnkzUcJu
JtwhVCE=
=O1q1
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc5' into for-4.21/block
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and
also getting the merge fix that went into mainline that users are
hitting testing for-4.21/block and/or for-next.
* tag 'v4.20-rc5': (664 commits)
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
...
Some error paths in configuration of admin queue free data buffer
associated with async request SQE without resetting the data buffer
pointer to NULL, This buffer is also freed up again if the controller
is shutdown or reset.
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Reviewed-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_stop_ctrl can be called also for reset flow and there is no need to
flush the scan_work as namespaces are not being removed. This can cause
deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
before controller teardown (and specifically I/O cancellation of the
scan_work itself) takes place, but the scan_work will be blocked anyways
so there is no need to flush it.
Instead, move scan_work flush to nvme_remove_namespaces() where it really
needs to flush.
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed by: James Smart <jsmart2021@gmail.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might
show up as invididual devices and cause problems, warn about it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Split the command submission and the SQ doorbell ring, and add the
doorbell ring as our ->commit_rqs() hook. This allows a list of
requests to be issued, with nvme only writing the SQ update when
it's necessary. This is more efficient if we have lists of requests
to issue, particularly on virtualized hardware, where writing the
SQ doorbell is more expensive than on real hardware. For those cases,
performance increases of 2-3x have been observed.
The use case for this is plugged IO, where blk-mq flushes a batch of
requests at the time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a PCIe NVMe device is not present, nvme_dev_remove_admin() calls
blk_cleanup_queue() on the admin queue, which frees the hctx for that
queue. Moments later, on the same path nvme_kill_queues() calls
blk_mq_unquiesce_queue() on admin queue and tries to access hctx of it,
which leads to following OOPS:
Oops: 0000 [#1] SMP PTI
RIP: 0010:sbitmap_any_bit_set+0xb/0x40
Call Trace:
blk_mq_run_hw_queue+0xd5/0x150
blk_mq_run_hw_queues+0x3a/0x50
nvme_kill_queues+0x26/0x50
nvme_remove_namespaces+0xb2/0xc0
nvme_remove+0x60/0x140
pci_device_remove+0x3b/0xb0
Fixes: cb4bfda62a ("nvme-pci: fix hot removal during error handling")
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Free the kobject name that was allocated for the controller device on
failure rather than its parent.
Fixes: d22524a478 ("nvme: switch controller refcounting to use struct device")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
blk_poll() has always kept spinning until it found an IO. This is
fine for SYNC polling, since we need to find one request we have
pending, but in preparation for ASYNC polling it can be beneficial
to just check if we have any entries available or not.
Existing callers are converted to pass in 'spin == true', to retain
the old behavior.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It doesn't set HIPRI on the bio, so polling for it is pretty silly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We always pass in -1 now and none of the callers use the tag value,
remove the parameter.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we want to support async IO polling, then we have to allow finding
completions that aren't just for the one we are looking for. Always pass
in -1 to the mq_ops->poll() helper, and have that return how many events
were found in this poll loop.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's specifically looking for a given request, which we will not be
supporting going forward. Also kill the qla2xxx poll implementation
as that's the only user of the nvme-fc poll, and the now unused
->poll_queue() hook.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently only really support sync poll, ie poll with 1 IO in flight.
This prepares us for supporting async poll.
Note that the returned value isn't necessarily 100% accurate. If poll
races with IRQ completion, we assume that the fact that the task is now
runnable means we found at least one entry. In reality it could be more
than 1, or not even 1. This is fine, the caller will just need to take
this into account.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need a better way of configuring this, and given that polling is
(still) a bit niche, let's default to using 0 poll queues. That way
we'll have the same read/write/poll behavior as 4.20, and users that
want to test/use polling are required to do manual configuration of the
number of poll queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlvx2sAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGycgIAIuxobwt0RRKa0zO
ROS+34JGoC2yU2P9VdEGWdtxS6ANMVQgKPBhWL6s+xR89Kd+V4xSdJLD1pNTxxqP
0DCva0np1/Q4juH+JbU50v/lykoLgteZ0P0LBRGf1y8p3WiLPv45IbnNsMDNYhB2
7a8rOmZYakRY9CPznRDw3X8cJt3sddKgFJHIOGz1OQJVWtCD0KPGcJmQNsbDSagY
Zx6Z5BKSIdjRqaAdN5gDa1Pft3WQo7TpaQGl80lSsgr5LcjmscXA3sClOCy+25Mo
FZLx0PcwP+Efq8RTGzNK51WSOMa6d37hvjDqUAdQBOR0KbyjRyXQwyQVw/MGbPJs
7J3Pzm0=
=56Mt
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc3' into for-4.21/block
Merge in -rc3 to resolve a few conflicts, but also to get a few
important fixes that have gone into mainline since the block
4.21 branch was forked off (most notably the SCSI queue issue,
which is both a conflict AND needed fix).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have separate poll queues, we know that they aren't using
interrupts. Hence we don't need to disable interrupts around
finding completions.
Provide a separate set of blk_mq_ops for such devices.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At least on SPARC, if MSI/MSI-X isn't supported, we get EINVAL if
we ask for more than one vector. This isn't covered by our ENOSPC
check.
If we get EINVAL, decrease our ask to just one vector, instead of
bailing out in error.
Fixes: 3b6592f70a ("nvme: utilize two queue maps, one for reads and one for writes")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the legacy request path gone there is no real need to override the
queue_lock.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an io error occurs on an io issued while connecting, recovery
of the io falls flat as the state checking ends up nooping the error
handler.
Create an err_work work item that is scheduled upon an io error while
connecting. The work thread terminates all io on all queues and marks
the queues as not connected. The termination of the io will return
back to the callee, which will then back out of the connection attempt
and will reschedule, if possible, the connection attempt.
The changes:
- in case there are several commands hitting the error handler, a
state flag is kept so that the error work is only scheduled once,
on the first error. The subsequent errors can be ignored.
- The calling sequence to stop keep alive and terminate the queues
and their io is lifted from the reset routine. Made a small
service routine used by both reset and err_work.
- During debugging, found that the teardown path can reference
an uninitialized pointer, resulting in a NULL pointer oops.
The aen_ops weren't initialized yet. Add validation on their
initialization before calling the teardown routine.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe always asks for io_queues + 1 worth of IRQ vectors, which
means that even when we scale all the way down, we still ask
for 2 vectors and get -ENOSPC in return if the system can't
support more than 1.
Getting just 1 vector is fine, it just means that we'll have
1 IO queue and 1 admin queue, with a shared vector between them.
Check for this case and don't add our + 1 if it happens.
Fixes: 3b6592f70a ("nvme: utilize two queue maps, one for reads and one for writes")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlvl3xoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpsoUEACecROMzIey+QOJ9o0YSaK5tlBWoC1OyK72
ncHCyxw+uW+qWa4Csosib7BRomz3E0nsQzf0b3MJiiZJGXnbfxRP0GWDrriK+635
UeVmWQfU2Ga2QmXGpnlSSF7mHHZWOWG7hUonGUBgCOiN2tLymHrnjmmPf7TuDuav
CliIgjan124MamohXyjcIa0EtySZmkTlJAxOtoOlxXwitLWnd28Vb3kOhG4dHXQs
lKO94R2souY00PX/e/8GtkAf1Em+5yJea/LAcOW8+qHA1WYzDqp1/TG/STLX0MVP
rgqg4E8j1LzCCmunaneIuSeo6yQhZPF2OHMGD8ERn+5c5RY0J4wsBAW2ZO0aqmBP
nfv+ZdZa71NU+pEEkOe79B5l1JiQNwTCu1ay/kfSGQpAnd2ejnY6QqiLnfCEgqWG
mcZi/JKcUst8I+MCV9vSjzl9GvMY7Wn5Fy031T4Qog2F0ZPns3FyNLuOLXXjkH7C
h5uliwuvLV3TpVWgWfVh8R7/j3M0dLndl5G5EYHwkb7It59r4rmNfgm1llZPFhWq
TENDvq5vLJaPXh5NIyxR1TowJNfgVembr5XiSJ7nOt8IFfJvkcfVIbQqRcpBk8vG
ygde6xKwGSxsfRoIhNTFU0mlphFpNgske600oZkm6PZq6DnivS9/4PD77nIH7p5v
6kR8aG43uQ==
=Nry6
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181109' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
- Two fixes for an ubd regression, one for missing locking, and one for
a missing initialization of a field. The latter was an old latent
bug, but it's now visible and triggers (Me, Anton Ivanov)
- Set of NVMe fixes via Christoph, but applied manually due to a git
tree mixup (Christoph, Sagi)
- Fix for a discard split regression, in three patches (Ming)
- Update libata git trees (Geert)
- SPDX identifier for sata_rcar (Kuninori Morimoto)
- Virtual boundary merge fix (Johannes)
- Preemptively clear memory we are going to pass to userspace, in case
the driver does a short read (Keith)
* tag 'for-linus-20181109' of git://git.kernel.dk/linux-block:
block: make sure writesame bio is aligned with logical block size
block: cleanup __blkdev_issue_discard()
block: make sure discard bio is aligned with logical block size
Revert "nvmet-rdma: use a private workqueue for delete"
nvme: make sure ns head inherits underlying device limits
nvmet: don't try to add ns to p2p map unless it actually uses it
sata_rcar: convert to SPDX identifiers
ubd: fix missing initialization of io_req
block: Clear kernel memory before copying to user
MAINTAINERS: Fix remaining pointers to obsolete libata.git
ubd: fix missing lock around request issue
block: respect virtual boundary mask in bvecs
This reverts commit 2acf70ade7.
The commit never really fixed the intended issue and caused all
kinds of other issues, including a use before initialization.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whenever we update ns_head info, we need to make sure it is still
compatible with all underlying backing devices because although nvme
multipath doesn't have any explicit use of these limits, other devices
can still be stacked on top of it which may rely on the underlying limits.
Start with unlimited stacking limits, and every info update iterate over
siblings and adjust queue limits.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even without CONFIG_P2PDMA this results in a error print:
nvmet: no peer-to-peer memory is available that's supported by rxe0 and /dev/nullb0
Fixes: c6925093d0 ("nvmet: Optionally use PCI P2P memory")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have this functionality in sbitmap, but we don't export it in
blk-mq for users of the tags busy iteration. This can be useful
for stopping the iteration, if the caller doesn't need to find
more requests.
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Adds support for defining a variable number of poll queues, currently
configurable with the 'poll_queues' module parameter. Defaults to
a single poll queue.
And now we finally have poll support without triggering interrupts!
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
NVMe does round-robin between queues by default, which means that
sharing a queue map for both reads and writes can be problematic
in terms of read servicing. It's much easier to flood the queue
with writes and reduce the read servicing.
Implement two queue maps, one for reads and one for writes. The
write queue count is configurable through the 'write_queues'
parameter.
By default, we retain the previous behavior of having a single
queue set, shared between reads and writes. Setting 'write_queues'
to a non-zero value will create two queue sets, one for reads and
one for writes, the latter using the configurable number of
queues (hardware queue counts permitting).
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation for allowing multiple sets of maps per
queue, if so desired.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=0zM4
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"The biggest part of this pull request is the revert of the blkcg
cleanup series. It had one fix earlier for a stacked device issue, but
another one was reported. Rather than play whack-a-mole with this,
revert the entire series and try again for the next kernel release.
Apart from that, only small fixes/changes.
Summary:
- Indentation fixup for mtip32xx (Colin Ian King)
- The blkcg cleanup series revert (Dennis Zhou)
- Two NVMe fixes. One fixing a regression in the nvme request
initialization in this merge window, causing nvme-fc to not work.
The other is a suspend/resume p2p resource issue (James, Keith)
- Fix sg discard merge, allowing us to merge in cases where we didn't
before (Jianchao Wang)
- Call rq_qos_exit() after the queue is frozen, preventing a hang
(Ming)
- Fix brd queue setup, fixing an oops if we fail setting up all
devices (Ming)"
* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
nvme-pci: fix conflicting p2p resource adds
nvme-fc: fix request private initialization
blkcg: revert blkcg cleanups series
block: brd: associate with queue until adding disk
block: call rq_qos_exit() after queue is frozen
mtip32xx: clean an indentation issue, remove extraneous tabs
block: fix the DISCARD request merge
The nvme pci driver had been adding its CMB resource to the P2P DMA
subsystem everytime on on a controller reset. This results in the
following warning:
------------[ cut here ]------------
nvme 0000:00:03.0: Conflicting mapping in same section
WARNING: CPU: 7 PID: 81 at kernel/memremap.c:155 devm_memremap_pages+0xa6/0x380
...
Call Trace:
pci_p2pdma_add_resource+0x153/0x370
nvme_reset_work+0x28c/0x17b1 [nvme]
? add_timer+0x107/0x1e0
? dequeue_entity+0x81/0x660
? dequeue_entity+0x3b0/0x660
? pick_next_task_fair+0xaf/0x610
? __switch_to+0xbc/0x410
process_one_work+0x1cf/0x350
worker_thread+0x215/0x3d0
? process_one_work+0x350/0x350
kthread+0x107/0x120
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30
---[ end trace f7ea76ac6ee72727 ]---
nvme nvme0: failed to register the CMB
This patch fixes this by registering the CMB with P2P only once.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The patch made to avoid Coverity reporting of out of bounds access
on aen_op moved the assignment of a pointer, leaving it null when it
was subsequently used to calculate a private pointer. Thus the private
pointer was bad.
Move/correct the private pointer initialization to be in sync with the
patch.
Fixes: 0d2bdf9f41 ("nvme-fc: rework the request initialization code")
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----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=LRTT
-----END PGP SIGNATURE-----
Merge tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"This is the main pull request for block changes for 4.20. This
contains:
- Series enabling runtime PM for blk-mq (Bart).
- Two pull requests from Christoph for NVMe, with items such as;
- Better AEN tracking
- Multipath improvements
- RDMA fixes
- Rework of FC for target removal
- Fixes for issues identified by static checkers
- Fabric cleanups, as prep for TCP transport
- Various cleanups and bug fixes
- Block merging cleanups (Christoph)
- Conversion of drivers to generic DMA mapping API (Christoph)
- Series fixing ref count issues with blkcg (Dennis)
- Series improving BFQ heuristics (Paolo, et al)
- Series improving heuristics for the Kyber IO scheduler (Omar)
- Removal of dangerous bio_rewind_iter() API (Ming)
- Apply single queue IPI redirection logic to blk-mq (Ming)
- Set of fixes and improvements for bcache (Coly et al)
- Series closing a hotplug race with sysfs group attributes (Hannes)
- Set of patches for lightnvm:
- pblk trace support (Hans)
- SPDX license header update (Javier)
- Tons of refactoring patches to cleanly abstract the 1.2 and 2.0
specs behind a common core interface. (Javier, Matias)
- Enable pblk to use a common interface to retrieve chunk metadata
(Matias)
- Bug fixes (Various)
- Set of fixes and updates to the blk IO latency target (Josef)
- blk-mq queue number updates fixes (Jianchao)
- Convert a bunch of drivers from the old legacy IO interface to
blk-mq. This will conclude with the removal of the legacy IO
interface itself in 4.21, with the rest of the drivers (me, Omar)
- Removal of the DAC960 driver. The SCSI tree will introduce two
replacement drivers for this (Hannes)"
* tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block: (204 commits)
block: setup bounce bio_sets properly
blkcg: reassociate bios when make_request() is called recursively
blkcg: fix edge case for blk_get_rl() under memory pressure
nvme-fabrics: move controller options matching to fabrics
nvme-rdma: always have a valid trsvcid
mtip32xx: fully switch to the generic DMA API
rsxx: switch to the generic DMA API
umem: switch to the generic DMA API
sx8: switch to the generic DMA API
sx8: remove dead IF_64BIT_DMA_IS_POSSIBLE code
skd: switch to the generic DMA API
ubd: remove use of blk_rq_map_sg
nvme-pci: remove duplicate check
drivers/block: Remove DAC960 driver
nvme-pci: fix hot removal during error handling
nvmet-fcloop: suppress a compiler warning
nvme-core: make implicit seed truncation explicit
nvmet-fc: fix kernel-doc headers
nvme-fc: rework the request initialization code
nvme-fc: introduce struct nvme_fcp_op_w_sgl
...
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
* pci/peer-to-peer:
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
PCI/P2PDMA: Add sysfs group to display p2pmem stats
PCI/P2PDMA: Support peer-to-peer memory
IP transports will most likely use the same controller options
matching when detecting a duplicate connect. Move it to
fabrics.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If not passed, we set the default trsvcid. We can rely on having trsvcid
and can simplify the controller matching logic.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is a cleanup patch doesn't change any functionality. It removes
the duplicate call to the blk_integrity_rq() in the nvme_map_data().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Create a configfs attribute in each nvme-fabrics namespace to enable P2P
memory use. The attribute may be enabled (with a boolean) or a specific
P2P device may be given (with the device's PCI name).
When enabled, the namespace will ensure the underlying block device
supports P2P and is compatible with any specified P2P device. If no device
was specified it will ensure there is compatible P2P memory somewhere in
the system. Enabling a namespace with P2P memory will fail with EINVAL
(and an appropriate dmesg error) if any of these conditions are not met.
Once a controller is set up on a specific port, the P2P device to use for
each namespace will be found and stored in a radix tree by namespace ID.
When memory is allocated for a request, the tree is used to look up the P2P
device to allocate memory against. If no device is in the tree (because no
appropriate device was found), or if allocation of P2P memory fails, fall
back to using regular memory.
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
[hch: partial rewrite of the initial code]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add helpers to allocate and free the SGL in a struct nvmet_req:
int nvmet_req_alloc_sgl(struct nvmet_req *req)
void nvmet_req_free_sgl(struct nvmet_req *req)
This will be expanded in a future patch to implement peer-to-peer memory
DMAs and should be common with all target drivers.
The new helpers are used in nvmet-rdma. Seeing we use req.transfer_len as
the length of the SGL it is set earlier and cleared on any error. It also
seems to be unnecessary to accumulate the length as the map_sgl functions
should only ever be called once per request.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
For P2P requests, we must use the pci_p2pmem_map_sg() function instead of
the dma_map_sg functions.
With that, we can then indicate PCI_P2P support in the request queue. For
this, we create an NVME_F_PCI_P2P flag which tells the core to set
QUEUE_FLAG_PCI_P2P in the request queue.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Register the CMB buffer as p2pmem and use the appropriate allocation
functions to create and destroy the IO submission queues.
If the CMB supports WDS and RDS, publish it for use as P2P memory by other
devices.
Kernels without CONFIG_PCI_P2PDMA will also no longer support NVMe CMB.
However, seeing the main use-cases for the CMB is P2P operations, this
seems like a reasonable dependency.
We drop the __iomem safety on the buffer seeing that, by convention, it's
safe to directly access memory mapped by memremap()/devm_memremap_pages().
Architectures where this is not safe will not be supported by memremap()
and therefore will not support PCI P2P and have no support for CMB.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A removal waits for the reset_work to complete. If a surprise removal
occurs around the same time as an error triggered controller reset, and
reset work happened to dispatch a command to the removed controller, the
command won't be recovered since the timeout work doesn't do anything
during error recovery. We wouldn't want to wait for timeout handling
anyway, so this patch fixes this by disabling the controller and killing
admin queues prior to syncing with the reset_work.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Building with W=1 enables the compiler warning -Wimplicit-fallthrough=3. That
option does not recognize the fall-through comment in the fcloop driver. Add
a fall-through comment that is recognized for -Wimplicit-fallthrough=3. This
patch avoids that the compiler reports the following warning when building
with W=1:
drivers/nvme/target/fcloop.c:647:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (op == NVMET_FCOP_READDATA)
^
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme_user_io.slba field is 64 bits wide. That value is copied into the
32-bit bio_integrity_payload.bip_iter.bi_sector field. Make that truncation
explicit to avoid that Coverity complains about implicit truncation. See
also Coverity ID 1056486 on http://scan.coverity.com/projects/linux.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that the kernel-doc tool complains about two function
headers when building with W=1.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead of setting and then clearing the first_sgl pointer for AEN requests,
leave that pointer zero. This patch does not change how requests are
initialized but avoids that Coverity reports the following complaint for
nvme_fc_init_aen_ops():
CID 1418400 (#1 of 1): Out-of-bounds access (OVERRUN)
4. overrun-buffer-val: Overrunning buffer pointed to by aen_op of 312 bytes by passing it to a function which accesses it at byte offset 312.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch does not change any functionality but makes the intent of the
code more clear.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that the kernel-doc tool complains about several
multiple function headers when building with W=1.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Although I'm not sure whether it is a good idea to support large discard
commands, I think integer overflow for discard ranges larger than 4 GB
should be avoided. This patch avoids that smatch reports the following:
drivers/nvme/target/io-cmd-file.c:249:1 nvmet_file_execute_discard() warn: should '((range.nlb)) << req->ns->blksize_shift' be a 64 bit type?
Fixes: d5eff33ee6 ("nvmet: add simple file backed ns support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that sparse complains about missing declarations.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Although the code modified by this patch looks fine to me, this patch avoids
that Coverity reports the following complaint (ID 1364971 and ID 1364973):
"You might overrun the 256-character fixed-size string id->subnqn".
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that the kernel-doc tool complains about the
nvme_suspend_queue() function header when building with W=1.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Although it is easy to see that the code in nvme_init_subnqn() guarantees that
the subsys->nqn string is '\0'-terminated, apparently Coverity is not smart
enough to see this. Make it easier for Coverity to analyze this code by changing
the strncpy() call into a strlcpy() call. This patch does not change the
behavior of the code but fixes Coveritiy ID 1423720.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that sparse complains about missing declarations.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Check whether queue->cm_error holds a value before reading it. This patch
addresses Coverity ID 1373774: unchecked return value.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
strncmp() stops comparing when either the end of one of the first two arguments
is reached or when 'n' characters have been compared, whichever comes first.
That means that strncmp(s1, s2, n) is equivalent to strcmp(s1, s2) if n exceeds
the length of s1 or the length of s2. Since that is the case in
nvmet_find_get_subsys(), change strncmp() into strcmp(). This patch avoids that
the following warning is reported by smatch:
drivers/nvme/target/core.c:940:1 nvmet_find_get_subsys() error: strncmp() '"nqn.2014-08.org.nvmexpress.discovery"' too small (37 vs 223)
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Get rid of the unreachable code in the nvmet_parse_discovery_cmd().
Keep the error message identical to the admin-cmd.c and io-cmd*.c
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme namespace paths were being updated only when the current path
was not set or nonoptimized. If a new path comes online that is a better
path for its NUMA node, the multipath selector may continue using the
previously set path on a potentially further node.
This patch re-runs the path assignment after successfully adding a new
optimized path.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
1.2 devices exposes their data and metadata size through the separate
identify command. Make sure that the NVMe LBA format does not override
these values.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The lightnvm subsystem provides helpers to retrieve chunk metadata,
where the target needs to provide a buffer to store the metadata. An
implicit assumption is that this buffer is contiguous and can be used to
retrieve the data from the device. If the device exposes too many
chunks, then kmalloc might fail, thus failing instance creation.
This patch removes this assumption by implementing an internal buffer in
the lightnvm subsystem to retrieve chunk metadata. Targets can then
use virtual memory allocations. Since this is a target API change, adapt
pblk accordingly.
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk implements two data paths for recovery line state. One for 1.2
and another for 2.0, instead of having pblk implement these, combine
them in the core to reduce complexity and make available to other
targets.
The new interface will adhere to the 2.0 chunk definition,
including managing open chunks with an active write pointer. To provide
this interface, a 1.2 device recovers the state of the chunks by
manually detecting if a chunk is either free/open/close/offline, and if
open, scanning the flash pages sequentially to find the next writeable
page. This process takes on average ~10 seconds on a device with 64 dies,
1024 blocks and 60us read access time. The process can be parallelized
but is left out for maintenance simplicity, as the 1.2 specification is
deprecated. For 2.0 devices, the logic is maintained internally in the
drive and retrieved through the 2.0 interface.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code had been clearing a namespace being deleted as the current
path while that namespace was still in the path siblings list. It is
possible a new IO could set that namespace back to the current path
since it appeared to be an eligable path to select, which may result in
a use-after-free error.
This patch ensures a namespace being removed is not eligable to be reset
as a current path prior to clearing it as the current path.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Queue deletion is done asynchronous when the last reference on the queue
is dropped. Thus, in order to make sure we don't over allocate under a
connect/disconnect storm, we let queue deletion complete before making
forward progress.
However, given that we flush the system_wq from rdma_cm context which
runs from a workqueue context, we can have a circular locking complaint
[1]. Fix that by using a private workqueue for queue deletion.
[1]:
======================================================
WARNING: possible circular locking dependency detected
4.19.0-rc4-dbg+ #3 Not tainted
------------------------------------------------------
kworker/5:0/39 is trying to acquire lock:
00000000a10b6db9 (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x6f/0x440 [rdma_cm]
but task is already holding lock:
00000000331b4e2c ((work_completion)(&queue->release_work)){+.+.}, at: process_one_work+0x3ed/0xa20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 ((work_completion)(&queue->release_work)){+.+.}:
process_one_work+0x474/0xa20
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
-> #2 ((wq_completion)"events"){+.+.}:
flush_workqueue+0xf3/0x970
nvmet_rdma_cm_handler+0x133d/0x1734 [nvmet_rdma]
cma_ib_req_handler+0x72f/0xf90 [rdma_cm]
cm_process_work+0x2e/0x110 [ib_cm]
cm_req_handler+0x135b/0x1c30 [ib_cm]
cm_work_handler+0x2b7/0x38cd [ib_cm]
process_one_work+0x4ae/0xa20
nvmet_rdma:nvmet_rdma_cm_handler: nvmet_rdma: disconnected (10): status 0 id 0000000040357082
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
nvme nvme0: Reconnecting in 10 seconds...
-> #1 (&id_priv->handler_mutex/1){+.+.}:
__mutex_lock+0xfe/0xbe0
mutex_lock_nested+0x1b/0x20
cma_ib_req_handler+0x6aa/0xf90 [rdma_cm]
cm_process_work+0x2e/0x110 [ib_cm]
cm_req_handler+0x135b/0x1c30 [ib_cm]
cm_work_handler+0x2b7/0x38cd [ib_cm]
process_one_work+0x4ae/0xa20
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
-> #0 (&id_priv->handler_mutex){+.+.}:
lock_acquire+0xc5/0x200
__mutex_lock+0xfe/0xbe0
mutex_lock_nested+0x1b/0x20
rdma_destroy_id+0x6f/0x440 [rdma_cm]
nvmet_rdma_release_queue_work+0x8e/0x1b0 [nvmet_rdma]
process_one_work+0x4ae/0xa20
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
Fixes: 777dc82395 ("nvmet-rdma: occasionally flush ongoing controller teardown")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
After bfcb79fca1 ("PCI/ERR: Run error recovery callbacks for all affected
devices"), AER errors are always cleared by the PCI core and drivers don't
need to do it themselves.
Remove calls to pci_cleanup_aer_uncorrect_error_status() from device
driver error recovery functions.
Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog, remove PCI core changes, remove unused variables]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Make current_path an array with an entry for every possible node, and
cache the best path on a per-node basis. Take the node distance into
account when selecting it. This is primarily useful for dual-ported PCIe
devices which are connected to PCIe root ports on different sockets.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
If we know that the I/O size exceeds our inline bio vec, no
point using it and split the rest to begin with. We could
in theory reuse the inline bio and only allocate the bio_vec,
but its really not worth optimizing for.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When an io is rejected by nvmf_check_ready() due to validation of the
controller state, the nvmf_fail_nonready_command() will normally return
BLK_STS_RESOURCE to requeue and retry. However, if the controller is
dying or the I/O is marked for NVMe multipath, the I/O is failed so that
the controller can terminate or so that the io can be issued on a
different path. Unfortunately, as this reject point is before the
transport has accepted the command, blk-mq ends up completing the I/O
and never calls nvme_complete_rq(), which is where multipath may preserve
or re-route the I/O. The end result is, the device user ends up seeing an
EIO error.
Example: single path connectivity, controller is under load, and a reset
is induced. An I/O is received:
a) while the reset state has been set but the queues have yet to be
stopped; or
b) after queues are started (at end of reset) but before the reconnect
has completed.
The I/O finishes with an EIO status.
This patch makes the following changes:
- Adds the HOST_PATH_ERROR pathing status from TP4028
- Modifies the reject point such that it appears to queue successfully,
but actually completes the io with the new pathing status and calls
nvme_complete_rq().
- nvme_complete_rq() recognizes the new status, avoids resetting the
controller (likely was already done in order to get this new status),
and calls the multipather to clear the current path that errored.
This allows the next command (retry or new command) to select a new
path if there is one.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds a new event for nvme async event notification.
We print the async event in the decoded format when we recognize
the event otherwise we just dump the result.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The fc transport device should allow for a rediscovery, as userspace
might have lost the events. Example is udev events not handled during
system startup.
This patch add a sysfs entry 'nvme_discovery' on the fc class to
have it replay all udev discovery events for all local port/remote
port address pairs.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently, if a targetport has been connected to via the nvmet config
(in other words, the add_port() transport routine called, and the nvmet
port pointer stored for using in upcalls on new io), and if the
targetport is then removed (say the lldd driver decides to unload or
fully reset its hardware) and then re-added (the lldd driver reloads or
reinits its hardware), the port pointer has been lost so there's no way
to continue to post commands up to nvmet via the transport port.
Correct by allocating a small "port context" structure that will be
linked to by the targetport. The context will save the targetport WWN's
and the nvmet port pointer to use for it. Initial allocation will occur
when the targetport is bound to via add_port. The context will be
deallocated when remove_port() is called. If a targetport is removed
while nvmet has the active port context, the targetport will be unlinked
from the port context before removal. If a new targetport is registered,
the port contexts without a binding are looked through and if the WWN's
match (so it's the same as nvmet's port context) the port context is
linked to the new target port. Thus new io can be received on the new
targetport and operation resumes with nvmet.
Additionally, this also resolves nvmet configuration changing out from
underneath of the nvme-fc target port (for example: a nvmetcli clear).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch removes the redundant module prefix used in the pr_err() when
nvmet_get_smart_log_nsid() failed to find the namespace provided as a part
of smart-log command.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rc6' into for-4.20/block
Merge -rc6 in, for two reasons:
1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
they aren't in the 4.20 branch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v4.19-rc6': (780 commits)
Linux 4.19-rc6
MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
cpufreq: qcom-kryo: Fix section annotations
perf/core: Add sanity check to deal with pinned event failure
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
selftests/powerpc: Fix Makefiles for headers_install change
blk-mq: I/O and timer unplugs are inverted in blktrace
dax: Fix deadlock in dax_lock_mapping_entry()
x86/boot: Fix kexec booting failure in the SEV bit detection code
bcache: add separate workqueue for journal_write to avoid deadlock
drm/amd/display: Fix Edid emulation for linux
drm/amd/display: Fix Vega10 lightup on S3 resume
drm/amdgpu: Fix vce work queue was not cancelled when suspend
Revert "drm/panel: Add device_link from panel device to DRM device"
xen/blkfront: When purging persistent grants, keep them in the buffer
clocksource/drivers/timer-atmel-pit: Properly handle error cases
block: fix deadline elevator drain for zoned block devices
ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We should be registering the ns_id attribute as default sysfs
attribute groups, otherwise we have a race condition between
the uevent and the attributes appearing in sysfs.
Suggested-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update device_add_disk() to take an 'groups' argument so that
individual drivers can register a device with additional sysfs
attributes.
This avoids race condition the driver would otherwise have if these
groups were to be created with sysfs_add_groups().
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When issuing a short read on the ANA log page the number of groups
should not change, even though the final returned data might contain
less groups than that number.
Signed-off-by: Hannes Reinecke <hare@suse.com>
[switched to a for loop]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently we always repost the recv buffer before we send a response
capsule back to the host. Since ordering is not guaranteed for send
and recv completions, it is posible that we will receive a new request
from the host before we got a send completion for the response capsule.
Today, we pre-allocate 2x rsps the length of the queue, but in reality,
under heavy load there is nothing that is really preventing the gap to
expand until we exhaust all our rsps.
To fix this, if we don't have any pre-allocated rsps left, we dynamically
allocate a rsp and make sure to free it when we are done. If under memory
pressure we fail to allocate a rsp, we silently drop the command and
wait for the host to retry.
Reported-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[hch: dropped a superflous assignment]
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a targetport is removed from the config, fcloop will avoid calling
the LS done() routine thinking the targetport is gone. This leaves the
initiator reset/reconnect hanging as it waits for a status on the
Create_Association LS for the reconnect.
Change the filter in the LS callback path. If tport null (set when
failed validation before "sending to remote port"), be sure to call
done. This was the main bug. But, continue the logic that only calls
done if tport was set but there is no remoteport (e.g. case where
remoteport has been removed, thus host doesn't expect a completion).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In many architectures loads may be reordered with older stores to
different locations. In the nvme driver the following two operations
could be reordered:
- Write shadow doorbell (dbbuf_db) into memory.
- Read EventIdx (dbbuf_ei) from memory.
This can result in a potential race condition between driver and VM host
processing requests (if given virtual NVMe controller has a support for
shadow doorbell). If that occurs, then the NVMe controller may decide to
wait for MMIO doorbell from guest operating system, and guest driver may
decide not to issue MMIO doorbell on any of subsequent commands.
This issue is purely timing-dependent one, so there is no easy way to
reproduce it. Currently the easiest known approach is to run "Oracle IO
Numbers" (orion) that is shipped with Oracle DB:
orion -run advanced -num_large 0 -size_small 8 -type rand -simulate \
concat -write 40 -duration 120 -matrix row -testname nvme_test
Where nvme_test is a .lun file that contains a list of NVMe block
devices to run test against. Limiting number of vCPUs assigned to given
VM instance seems to increase chances for this bug to occur. On test
environment with VM that got 4 NVMe drives and 1 vCPU assigned the
virtual NVMe controller hang could be observed within 10-20 minutes.
That correspond to about 400-500k IO operations processed (or about
100GB of IO read/writes).
Orion tool was used as a validation and set to run in a loop for 36
hours (equivalent of pushing 550M IO operations). No issues were
observed. That suggest that the patch fixes the issue.
Fixes: f9f38e3338 ("nvme: improve performance for virtual NVMe devices")
Signed-off-by: Michal Wnukowski <wnukowski@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
[hch: updated changelog and comment a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
rdma.git merge resolution for the 4.19 merge window
Conflicts:
drivers/infiniband/core/rdma_core.c
- Use the rdma code and revise with the new spelling for
atomic_fetch_add_unless
drivers/nvme/host/rdma.c
- Replace max_sge with max_send_sge in new blk code
drivers/nvme/target/rdma.c
- Use the blk code and revise to use NULL for ib_post_recv when
appropriate
- Replace max_sge with max_recv_sge in new blk code
net/rds/ib_send.c
- Use the net code and revise to use NULL for ib_post_recv when
appropriate
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltwm2geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGITkH/iSzkVhT2OxHoir0
mLVzTi7/Z17L0e/ELl7TvAC0iLFlWZKdlGR0g3b4/QpXLPmNK4HxiDRTQuWn8ke0
qDZyDq89HqLt+mpeFZ43PCd9oqV8CH2xxK3iCWReqv6bNnowGnRpSStlks4rDqWn
zURC/5sUh7TzEG4s997RrrpnyPeQWUlf/Mhtzg2/WvK2btoLWgu5qzjX1uFh3s7u
vaF2NXVJ3X03gPktyxZzwtO1SwLFS1jhwUXWBZ5AnoJ99ywkghQnkqS/2YpekNTm
wFk80/78sU+d91aAqO8kkhHj8VRrd+9SGnZ4mB2aZHwjZjGcics4RRtxukSfOQ+6
L47IdXo=
=sJkt
-----END PGP SIGNATURE-----
Merge tag 'v4.18' into rdma.git for-next
Resolve merge conflicts from the -rc cycle against the rdma.git tree:
Conflicts:
drivers/infiniband/core/uverbs_cmd.c
- New ifs added to ib_uverbs_ex_create_flow in -rc and for-next
- Merge removal of file->ucontext in for-next with new code in -rc
drivers/infiniband/core/uverbs_main.c
- for-next removed code from ib_uverbs_write() that was modified
in for-rc
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----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=b9ib
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
When the user supplies a ctrl_loss_tmo < 0, we warn them that this will
cause the fabrics layer to attempt reconnection forever. However, in
reality the fabrics layer never attempts to reconnect because the
condition to test whether we should reconnect is backwards in this case.
Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch implements the Namespace Write Protect feature described in
"NVMe TP 4005a Namespace Write Protect". In this version, we implement
No Write Protect and Write Protect states for target ns which can be
toggled by set-features commands from the host side.
For write-protect state transition, we need to flush the ns specified
as a part of command so we also add helpers for carrying out synchronous
flush operations.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: fixed an incorrect endianess conversion, minor cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe 1.3 TP 4005 introduces new filed (NSATTR). This field indicates
whether given namespace is write protected or not. This patch sets the
gendisk associated with the namespace to read only based on the identify
namespace nsattr field.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
