The test is only concerned with host MDB entries and not with MDB
entries as a whole. Rename the test to reflect that.
Subsequent patches will add a more general test that will contain the
test cases for host MDB entries and remove the current test.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Incorrect error check in nft_expr_inner_parse(), from Dan Carpenter.
2) Add DATA_SENT state to SCTP connection tracking helper, from
Sriram Yagnaraman.
3) Consolidate nf_confirm for ipv4 and ipv6, from Florian Westphal.
4) Add bitmask support for ipset, from Vishwanath Pai.
5) Handle icmpv6 redirects as RELATED, from Florian Westphal.
6) Add WARN_ON_ONCE() to impossible case in flowtable datapath,
from Li Qiong.
7) A large batch of IPVS updates to replace timer-based estimators by
kthreads to scale up wrt. CPUs and workload (millions of estimators).
Julian Anastasov says:
This patchset implements stats estimation in kthread context.
It replaces the code that runs on single CPU in timer context every 2
seconds and causing latency splats as shown in reports [1], [2], [3].
The solution targets setups with thousands of IPVS services,
destinations and multi-CPU boxes.
Spread the estimation on multiple (configured) CPUs and multiple
time slots (timer ticks) by using multiple chains organized under RCU
rules. When stats are not needed, it is recommended to use
run_estimation=0 as already implemented before this change.
RCU Locking:
- As stats are now RCU-locked, tot_stats, svc and dest which
hold estimator structures are now always freed from RCU
callback. This ensures RCU grace period after the
ip_vs_stop_estimator() call.
Kthread data:
- every kthread works over its own data structure and all
such structures are attached to array. For now we limit
kthreads depending on the number of CPUs.
- even while there can be a kthread structure, its task
may not be running, eg. before first service is added or
while the sysctl var is set to an empty cpulist or
when run_estimation is set to 0 to disable the estimation.
- the allocated kthread context may grow from 1 to 50
allocated structures for timer ticks which saves memory for
setups with small number of estimators
- a task and its structure may be released if all
estimators are unlinked from its chains, leaving the
slot in the array empty
- every kthread data structure allows limited number
of estimators. Kthread 0 is also used to initially
calculate the max number of estimators to allow in every
chain considering a sub-100 microsecond cond_resched
rate. This number can be from 1 to hundreds.
- kthread 0 has an additional job of optimizing the
adding of estimators: they are first added in
temp list (est_temp_list) and later kthread 0
distributes them to other kthreads. The optimization
is based on the fact that newly added estimator
should be estimated after 2 seconds, so we have the
time to offload the adding to chain from controlling
process to kthread 0.
- to add new estimators we use the last added kthread
context (est_add_ktid). The new estimators are linked to
the chains just before the estimated one, based on add_row.
This ensures their estimation will start after 2 seconds.
If estimators are added in bursts, common case if all
services and dests are initially configured, we may
spread the estimators to more chains and as result,
reducing the initial delay below 2 seconds.
Many thanks to Jiri Wiesner for his valuable comments
and for spending a lot of time reviewing and testing
the changes on different platforms with 48-256 CPUs and
1-8 NUMA nodes under different cpufreq governors.
The new IPVS estimators do not use workqueue infrastructure
because:
- The estimation can take long time when using multiple IPVS rules (eg.
millions estimator structures) and especially when box has multiple
CPUs due to the for_each_possible_cpu usage that expects packets from
any CPU. With est_nice sysctl we have more control how to prioritize the
estimation kthreads compared to other processes/kthreads that have
latency requirements (such as servers). As a benefit, we can see these
kthreads in top and decide if we will need some further control to limit
their CPU usage (max number of structure to estimate per kthread).
- with kthreads we run code that is read-mostly, no write/lock
operations to process the estimators in 2-second intervals.
- work items are one-shot: as estimators are processed every
2 seconds, they need to be re-added every time. This again
loads the timers (add_timer) if we use delayed works, as there are
no kthreads to do the timings.
[1] Report from Yunhong Jiang:
https://lore.kernel.org/netdev/D25792C1-1B89-45DE-9F10-EC350DC04ADC@gmail.com/
[2] https://marc.info/?l=linux-virtual-server&m=159679809118027&w=2
[3] Report from Dust:
https://archive.linuxvirtualserver.org/html/lvs-devel/2020-12/msg00000.html
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
ipvs: run_estimation should control the kthread tasks
ipvs: add est_cpulist and est_nice sysctl vars
ipvs: use kthreads for stats estimation
ipvs: use u64_stats_t for the per-cpu counters
ipvs: use common functions for stats allocation
ipvs: add rcu protection to stats
netfilter: flowtable: add a 'default' case to flowtable datapath
netfilter: conntrack: set icmpv6 redirects as RELATED
netfilter: ipset: Add support for new bitmask parameter
netfilter: conntrack: merge ipv4+ipv6 confirm functions
netfilter: conntrack: add sctp DATA_SENT state
netfilter: nft_inner: fix IS_ERR() vs NULL check
====================
Link: https://lore.kernel.org/r/20221211101204.1751-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fix up ptrace interface to protection keys register (PKRU)
* Avoid undefined compiler behavior with TYPE_ALIGN
-----BEGIN PGP SIGNATURE-----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=An0n
-----END PGP SIGNATURE-----
Merge tag 'x86_fpu_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Dave Hansen:
"There are two little fixes in here, one to give better XSAVE warnings
and another to address some undefined behavior in offsetof().
There is also a collection of patches to fix some issues with ptrace
and the protection keys register (PKRU). PKRU is a real oddity because
it is exposed in the XSAVE-related ABIs, but it is generally managed
without using XSAVE in the kernel. This fix thankfully came with a
selftest to ward off future regressions.
Summary:
- Clarify XSAVE consistency warnings
- Fix up ptrace interface to protection keys register (PKRU)
- Avoid undefined compiler behavior with TYPE_ALIGN"
* tag 'x86_fpu_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN
selftests/vm/pkeys: Add a regression test for setting PKRU through ptrace
x86/fpu: Emulate XRSTOR's behavior if the xfeatures PKRU bit is not set
x86/fpu: Allow PKRU to be (once again) written by ptrace.
x86/fpu: Add a pkru argument to copy_uabi_to_xstate()
x86/fpu: Add a pkru argument to copy_uabi_from_kernel_to_xstate().
x86/fpu: Take task_struct* in copy_sigframe_from_user_to_xstate()
x86/fpu/xstate: Fix XSTATE_WARN_ON() to emit relevant diagnostics
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmOXYmwACgkQaDWVMHDJ
krD8hg/+J0hUTfljmlCctwGZyqVR3Y2E722wL9oTvbgYiUAtFrARzfPF0WNwvHi5
Ywvod5hQ4unPoluthdVAD/uJqcPVhjIZ7CvNTGrS8J7ED5x5ydGLNWAL3Rn+9s6O
xkz/DsV4zl+cPQ60XLsO+3Mc6RhwVs9DUthpUovl22epmgmRPCovkHWkvQsZajJq
ceF/78ThfrkG4dDouaIXi1gsmKLLzU4KdHeBATMg0bgPQXFJZSGBCLaeJXWmLapq
7N3SznUqDMn4Plr/IuP4XuMA6VTVojrakCcBmw5SGVqhkVWGM1/FMg7jHSQS7Z5V
5uG7CkhTBqh17v9xKwDMPh34D51TLtNifA7jbecyL5155czFkj7BoSwEFINU/wCz
agUO9NvK9j1chUnA2UGqGQigM3nWGZHMwaQjfgBWyq5gqF8HURUUrjx6XuunOfmB
1byyrDu0g48u/zaQ/RpNfewz1ZY+WylDPcqOhYaVWF1PYThStML/VMBKpdsl1Ovw
nytUdQsaBIjFHQdB+snizaF93+/0FG+FTGAlDnHYmey/8plL2LYuzrcDnDYnGEXa
tN3HFd2lAi4JBLmvmgF39gH+BLXuKTLweIhwTXZTn91cfire3yxiXAnLd0tuptMP
aXFddxKMdMpxTqzy2X+8gJjqCr2lZ9gZkxaPsWwrBM+xrJf0p2w=
=JGnq
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tdx updates from Dave Hansen:
"This includes a single chunk of new functionality for TDX guests which
allows them to talk to the trusted TDX module software and obtain an
attestation report.
This report can then be used to prove the trustworthiness of the guest
to a third party and get access to things like storage encryption
keys"
* tag 'x86_tdx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/tdx: Test TDX attestation GetReport support
virt: Add TDX guest driver
x86/tdx: Add a wrapper to get TDREPORT0 from the TDX Module
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device unlock.
- Add a facility for the kernel to warn about collisions between kernel
and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY5UpyAAKCRDfioYZHlFs
Z0ttAP4uxCjIibKsFVyexpSgI4vaZqQ9yt9NesmPwonc0XookwD+PlwP6Xc0d0Ox
t0gJ6+pwdh11NRzhcNE1pAaPcJZU4gs=
=HAQk
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.2.
While it may seem backwards, the CXL update this time around includes
some focus on CXL 1.x enabling where the work to date had been with
CXL 2.0 (VH topologies) in mind.
First generation CXL can mostly be supported via BIOS, similar to DDR,
however it became clear there are use cases for OS native CXL error
handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
hosts (Restricted CXL Host (RCH) topologies). So, this update brings
RCH topologies into the Linux CXL device model.
In support of the ongoing CXL 2.0+ enabling two new core kernel
facilities are added.
One is the ability for the kernel to flag collisions between userspace
access to PCI configuration registers and kernel accesses. This is
brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
mailbox over config-cycles.
The other is a cpu_cache_invalidate_memregion() API that maps to
wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
VMs and architectures that do not support it yet. The CXL paths that
need it, dynamic memory region creation and security commands (erase /
unlock), are disabled when it is not present.
As for the CXL 2.0+ this cycle the subsystem gains support Persistent
Memory Security commands, error handling in response to PCIe AER
notifications, and support for the "XOR" host bridge interleave
algorithm.
Summary:
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device
unlock.
- Add a facility for the kernel to warn about collisions between
kernel and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL
1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
cxl/region: Fix memdev reuse check
cxl/pci: Remove endian confusion
cxl/pci: Add some type-safety to the AER trace points
cxl/security: Drop security command ioctl uapi
cxl/mbox: Add variable output size validation for internal commands
cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
cxl/security: Fix Get Security State output payload endian handling
cxl: update names for interleave ways conversion macros
cxl: update names for interleave granularity conversion macros
cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
tools/testing/cxl: Require cache invalidation bypass
cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
cxl/region: Fix spelling mistake "memergion" -> "memregion"
cxl/regs: Fix sparse warning
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
tools/testing/cxl: Add an RCH topology
cxl/port: Add RCD endpoint port enumeration
cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
tools/testing/cxl: Add XOR Math support to cxl_test
cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
...
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
- Fix nasty and hard to debug race condition introduced by mistake
in the runtime PM core code and clean up that code somewhat on
top of the fix (Rafael Wysocki).
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Update Qualcomm cpufreq driver, including:
* CPU clock provider support,
* Generic cleanups or reorganization.
* Potential memleak fix.
* Fix of the return value of cpufreq_driver->get().
(Manivannan Sadhasivam, Chen Hui).
- Update Qualcomm cpufreq driver's DT bindings, including:
* Support for CPU clock provider.
* Missing cache-related properties fixes.
* Support for QDU1000/QRU1000.
(Manivannan Sadhasivam, Rob Herring, Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET).
- Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen).
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich).
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver
(Xiongfeng Wang).
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu).
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor).
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada).
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King).
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King).
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko).
- Drop a reference to CVS from cpufreq documentation (Conghui Wang).
- Improve kernel messages printed by the PSCI cpuidle driver (Ulf
Hansson).
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson).
- Modify the tasks freezing code to avoid using pr_cont() and refine an
error message printed by it (Rafael Wysocki).
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo).
- Fix mistake in a kerneldoc comment in the hibernation code (xiongxin).
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa).
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the
generic power domains code (Abel Vesa).
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo).
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo).
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo).
- Fix compiler warnings with make W=1 in the idle_inject power capping
driver (Srinivas Pandruvada).
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET).
- Add SCMI Powercap based power capping driver (Cristian Marussi).
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy).
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn).
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar).
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties
to be present without the others present (James Calligeros).
- Fix clock-latency-ns property in DT example (Serge Semin).
- Add a private governor_data for devfreq governors (Kant Fan).
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi).
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar).
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli).
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=B9Uu
-----END PGP SIGNATURE-----
Merge tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include two new drivers (cpufreq driver for Apple SoC CPU
P-states and the SCMI Powercap based power capping driver), other new
hardware support and driver extensions (Qualcomm cpufreq driver and
its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq),
a bunch of fixes and cleanups all over and a cpupower utility update
including new features related to RAPL support.
Specifics:
- Fix nasty and hard to debug race condition introduced by mistake in
the runtime PM core code and clean up that code somewhat on top of
the fix (Rafael Wysocki)
- Generalize of_perf_domain_get_sharing_cpumask phandle format
(Hector Martin)
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin)
- Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui):
- CPU clock provider support
- Generic cleanups or reorganization
- Potential memleak fix
- Fix of the return value of cpufreq_driver->get()
- Update Qualcomm cpufreq driver's DT bindings (Manivannan
Sadhasivam, Rob Herring, Melody Olvera):
- Support for CPU clock provider
- Missing cache-related properties fixes
- Support for QDU1000/QRU1000
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan)
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET)
- Convert cpufreq statistics code to use sysfs_emit_at() (ye
xingchen)
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich)
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq
driver (Xiongfeng Wang)
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu)
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor)
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada)
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King)
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King)
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko)
- Drop a reference to CVS from cpufreq documentation (Conghui Wang)
- Improve kernel messages printed by the PSCI cpuidle driver (Ulf
Hansson)
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson)
- Modify the tasks freezing code to avoid using pr_cont() and refine
an error message printed by it (Rafael Wysocki)
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo)
- Fix mistake in a kerneldoc comment in the hibernation code
(xiongxin)
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa)
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in
the generic power domains code (Abel Vesa)
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo)
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo)
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo)
- Fix compiler warnings with make W=1 in the idle_inject power
capping driver (Srinivas Pandruvada)
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET)
- Add SCMI Powercap based power capping driver (Cristian Marussi)
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy)
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn)
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar)
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt
properties to be present without the others present (James
Calligeros)
- Fix clock-latency-ns property in DT example (Serge Semin)
- Add a private governor_data for devfreq governors (Kant Fan)
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi)
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar)
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli)
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger)"
* tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
PM: runtime: Adjust white space in the core code
cpufreq: Remove CVS version control contents from documentation
cpufreq: stats: Convert to use sysfs_emit_at() API
cpufreq: ACPI: Only set boost MSRs on supported CPUs
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: runtime: Relocate rpm_callback() right after __rpm_callback()
PM: runtime: Do not call __rpm_callback() from rpm_idle()
PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
PM / devfreq: event: Use device_match_of_node()
PM / devfreq: Use device_match_of_node()
powercap: idle_inject: Fix warnings with make W=1
PM: hibernate: Complain about memory map mismatches during resume
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
...
Currently, kunit_parser.py is stripping all leading whitespace to make
parsing easier. But this means we can't accurately show kernel output
for failing tests or when the kernel crashes.
Embarassingly, this affects even KUnit's own output, e.g.
[13:40:46] Expected 2 + 1 == 2, but
[13:40:46] 2 + 1 == 3 (0x3)
[13:40:46] not ok 1 example_simple_test
[13:40:46] [FAILED] example_simple_test
After this change, here's what the output in context would look like
[13:40:46] =================== example (4 subtests) ===================
[13:40:46] # example_simple_test: initializing
[13:40:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[13:40:46] Expected 2 + 1 == 2, but
[13:40:46] 2 + 1 == 3 (0x3)
[13:40:46] [FAILED] example_simple_test
[13:40:46] [SKIPPED] example_skip_test
[13:40:46] [SKIPPED] example_mark_skipped_test
[13:40:46] [PASSED] example_all_expect_macros_test
[13:40:46] # example: initializing suite
[13:40:46] # example: pass:1 fail:1 skip:2 total:4
[13:40:46] # Totals: pass:1 fail:1 skip:2 total:4
[13:40:46] ===================== [FAILED] example =====================
This example shows one minor cosmetic defect this approach has.
The test counts lines prevent us from dedenting the suite-level output.
But at the same time, any form of non-KUnit output would do the same
unless it happened to be indented as well.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We print the "test log" on failure.
This is meant to be all the kernel output that happened during the test.
But we also include the special KTAP lines in it, which are often
redundant.
E.g. we include the "not ok" line in the log, right before we print
that the test case failed...
[13:51:48] Expected 2 + 1 == 2, but
[13:51:48] 2 + 1 == 3 (0x3)
[13:51:48] not ok 1 example_simple_test
[13:51:48] [FAILED] example_simple_test
More full example after this patch:
[13:51:48] =================== example (4 subtests) ===================
[13:51:48] # example_simple_test: initializing
[13:51:48] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[13:51:48] Expected 2 + 1 == 2, but
[13:51:48] 2 + 1 == 3 (0x3)
[13:51:48] [FAILED] example_simple_test
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Change the KUnit parser to be able to parse test output that complies with
the KTAP version 1 specification format found here:
https://kernel.org/doc/html/latest/dev-tools/ktap.html. Ensure the parser
is able to parse tests with the original KUnit test output format as
well.
KUnit parser now accepts any of the following test output formats:
Original KUnit test output format:
TAP version 14
1..1
# Subtest: kunit-test-suite
1..3
ok 1 - kunit_test_1
ok 2 - kunit_test_2
ok 3 - kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 - kunit-test-suite
KTAP version 1 test output format:
KTAP version 1
1..1
KTAP version 1
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
ok 1 kunit-test-suite
New KUnit test output format (changes made in the next patch of
this series):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit-test-suite
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 kunit-test-suite
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When --raw_output is set (to any value), we don't actually parse the
test results. So asking to print the test results as json doesn't make
sense.
We internally create a fake test with one passing subtest, so --json
would actually print out something misleading.
This patch:
* Rewords the flag descriptions so hopefully this is more obvious.
* Also updates --raw_output's description to note the default behavior
is to print out only "KUnit" results (actually any KTAP results)
* also renames and refactors some related logic for clarity (e.g.
test_result => test, it's a kunit_parser.Test object).
Notably, this patch does not make it an error to specify --json and
--raw_output together. This is an edge case, but I know of at least one
wrapper around kunit.py that always sets --json. You'd never be able to
use --raw_output with that wrapper.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We currently tell people we "couldn't find any KTAP output" with no
indication as to what this might mean.
After this patch, we get:
$ ./tools/testing/kunit/kunit.py parse /dev/null
============================================================
[ERROR] Test: <missing>: Could not find any KTAP output. Did any KUnit tests run?
============================================================
Testing complete. Ran 0 tests: errors: 1
Note: we could try and generate a more verbose message like
> Please check .kunit/test.log to see the raw kernel output.
or the like, but we'd need to know what the build dir was to know where
test.log actually lives.
This patch tries to make a more minimal improvement.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We're using a `with` block above, so the file object is already closed.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Let's verify that the parser isn't reporting any errors for valid
inputs.
This change also
* does result.status checking on one line
* makes sure we consistently do it outside of the `with` block
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since we're using Python 3.7+, we can use dataclasses to tersen the
code.
It also lets us create pre-populated TestCounts() objects and compare
them in our unit test. (Before, you could only create empty ones).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
x86 Xen-for-KVM:
* Allow the Xen runstate information to cross a page boundary
* Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
* add support for 32-bit guests in SCHEDOP_poll
x86 fixes:
* One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
* Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
* Clean up the MSR filter docs.
* Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
* Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
* Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
* Advertise (on AMD) that the SMM_CTL MSR is not supported
* Remove unnecessary exports
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
Documentation:
* Remove deleted ioctls from documentation
* Various fixes
-----BEGIN PGP SIGNATURE-----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=fzwv
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-12-11
We've added 74 non-merge commits during the last 11 day(s) which contain
a total of 88 files changed, 3362 insertions(+), 789 deletions(-).
The main changes are:
1) Decouple prune and jump points handling in the verifier, from Andrii.
2) Do not rely on ALLOW_ERROR_INJECTION for fmod_ret, from Benjamin.
Merged from hid tree.
3) Do not zero-extend kfunc return values. Necessary fix for 32-bit archs,
from Björn.
4) Don't use rcu_users to refcount in task kfuncs, from David.
5) Three reg_state->id fixes in the verifier, from Eduard.
6) Optimize bpf_mem_alloc by reusing elements from free_by_rcu, from Hou.
7) Refactor dynptr handling in the verifier, from Kumar.
8) Remove the "/sys" mount and umount dance in {open,close}_netns
in bpf selftests, from Martin.
9) Enable sleepable support for cgrp local storage, from Yonghong.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (74 commits)
selftests/bpf: test case for relaxed prunning of active_lock.id
selftests/bpf: Add pruning test case for bpf_spin_lock
bpf: use check_ids() for active_lock comparison
selftests/bpf: verify states_equal() maintains idmap across all frames
bpf: states_equal() must build idmap for all function frames
selftests/bpf: test cases for regsafe() bug skipping check_id()
bpf: regsafe() must not skip check_ids()
docs/bpf: Add documentation for BPF_MAP_TYPE_SK_STORAGE
selftests/bpf: Add test for dynptr reinit in user_ringbuf callback
bpf: Use memmove for bpf_dynptr_{read,write}
bpf: Move PTR_TO_STACK alignment check to process_dynptr_func
bpf: Rework check_func_arg_reg_off
bpf: Rework process_dynptr_func
bpf: Propagate errors from process_* checks in check_func_arg
bpf: Refactor ARG_PTR_TO_DYNPTR checks into process_dynptr_func
bpf: Skip rcu_barrier() if rcu_trace_implies_rcu_gp() is true
bpf: Reuse freed element in free_by_rcu during allocation
selftests/bpf: Bring test_offload.py back to life
bpf: Fix comment error in fixup_kfunc_call function
bpf: Do not zero-extend kfunc return values
...
====================
Link: https://lore.kernel.org/r/20221212024701.73809-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Highlights:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having
to add more and more quirks
- android-x86-tablets: Add support for 2 more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- battery: Pass battery hook pointer to hook callbacks
ISST:
- Fix typo in comments
Move existing HP drivers to a new hp subdir:
- Move existing HP drivers to a new hp subdir
dell:
- Add new dell-wmi-ddv driver
dell-ddv:
- Warn if ePPID has a suspicious length
- Improve buffer handling
huawei-wmi:
- remove unnecessary member
- fix return value calculation
- do not hard-code sizes
ideapad-laptop:
- Make touchpad_ctrl_via_ec a module option
- Stop writing VPCCMD_W_TOUCHPAD at probe time
- Send KEY_TOUCHPAD_TOGGLE on some models
- Only toggle ps2 aux port on/off on select models
- Do not send KEY_TOUCHPAD* events on probe / resume
- Refactor ideapad_sync_touchpad_state()
- support for more special keys in WMI
- Add new _CFG bit numbers for future use
- Revert "check for touchpad support in _CFG"
intel/pmc:
- Relocate Alder Lake PCH support
- Relocate Tiger Lake PCH support
- Relocate Ice Lake PCH support
- Relocate Cannon Lake Point PCH support
- Relocate Sunrise Point PCH support
- Move variable declarations and definitions to header and core.c
- Replace all the reg_map with init functions
intel/pmc/core:
- Add Meteor Lake support to pmc core driver
intel_scu_ipc:
- fix possible name leak in __intel_scu_ipc_register()
mxm-wmi:
- fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/mellanox:
- mlxbf-pmc: Fix event typo
- Add BlueField-3 support in the tmfifo driver
platform/x86/amd:
- pmc: Add a workaround for an s0i3 issue on Cezanne
platform/x86/amd/pmf:
- pass the struct by reference
platform/x86/dell:
- alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86/intel:
- pmc: Fix repeated word in comment
platform/x86/intel/hid:
- Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86/intel/sdsi:
- Add meter certificate support
- Support different GUIDs
- Hide attributes if hardware doesn't support
- Add Intel On Demand text
sony-laptop:
- Convert to use sysfs_emit_at() API
thinkpad_acpi:
- use strstarts()
- Fix max_brightness of thinklight
tools/arch/x86:
- intel_sdsi: Add support for reading meter certificates
- intel_sdsi: Add support for new GUID
- intel_sdsi: Read more On Demand registers
- intel_sdsi: Add Intel On Demand text
- intel_sdsi: Add support for reading state certificates
uv_sysfs:
- Use sysfs_emit() instead of scnprintf()
wireless-hotkey:
- use ACPI HID as phys
x86-android-tablets:
- Add Advantech MICA-071 extra button
- Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
- Add Medion Lifetab S10346 data
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmOW+QgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yAPwf/dAYLHiC2ox5YlNTLX2DvU+jOpeBv
W+EIx4oHQz1+O9jrWMLyvS9zTwTEAf6ANLiMP3damEvtJnB72ClgFITzlJAaB4zN
yj0SdxoBRMt6zDL2QwMkwitvb5kJonLfO2H7NsMwA6f0KP1X8sio3oVRAMMVwlzz
nwDKM/VBpuxmy+d880wRRoAkgRkTsPIOwBkYdo1525NU7kkTmtrMpgM+SXQsHTJn
TB9uQnyuiq5/znh3k1Qn+OGwXQezmGz2Fb76IcW5RzUQDew6n6b3kzILee5ddynT
Pa7/ibwpV+FtZjm2kS/l4tV+WPdA+s5TSWoq7Hz0jzBX9GdOORcMZmEneg==
=z16d
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- Ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having to
add more and more quirks
- Android x86 tablets:
- Add support for two more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
* tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (52 commits)
platform/mellanox: mlxbf-pmc: Fix event typo
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
platform/x86: sony-laptop: Convert to use sysfs_emit_at() API
platform/x86/dell: alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86: uv_sysfs: Use sysfs_emit() instead of scnprintf()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button
platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data
platform/x86: wireless-hotkey: use ACPI HID as phys
platform/x86/intel/hid: Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86: ideapad-laptop: Make touchpad_ctrl_via_ec a module option
platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time
platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models
platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models
platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume
platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state()
tools/arch/x86: intel_sdsi: Add support for reading meter certificates
tools/arch/x86: intel_sdsi: Add support for new GUID
tools/arch/x86: intel_sdsi: Read more On Demand registers
...
ACPI:
* Enable FPDT support for boot-time profiling
* Fix CPU PMU probing to work better with PREEMPT_RT
* Update SMMUv3 MSI DeviceID parsing to latest IORT spec
* APMT support for probing Arm CoreSight PMU devices
CPU features:
* Advertise new SVE instructions (v2.1)
* Advertise range prefetch instruction
* Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
* Enable DIT (Data Independent Timing) when running in the kernel
* More conversion of system register fields over to the generated
header
CPU misfeatures:
* Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
* Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's
pointer authentication feature when it is supported (complete
with scary DWARF parser!)
Tracing and debug:
* Remove static ftrace in favour of, err, dynamic ftrace!
* Seperate 'struct ftrace_regs' from 'struct pt_regs' in core
ftrace and existing arch code
* Introduce and implement FTRACE_WITH_ARGS on arm64 to replace
the old FTRACE_WITH_REGS
* Extend 'crashkernel=' parameter with default value and fallback
to placement above 4G physical if initial (low) allocation
fails
SVE:
* Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
* Rework of undefined instruction handling to avoid serialisation
on global lock (this includes emulation of user accesses to the
ID registers)
Perf and PMU:
* Support for TLP filters in Hisilicon's PCIe PMU device
* Support for the DDR PMU present in Amlogic Meson G12 SoCs
* Support for the terribly-named "CoreSight PMU" architecture
from Arm (and Nvidia's implementation of said architecture)
Misc:
* Tighten up our boot protocol for systems with memory above
52 bits physical
* Const-ify static keys to satisty jump label asm constraints
* Trivial FFA driver cleanups in preparation for v1.1 support
* Export the kernel_neon_* APIs as GPL symbols
* Harden our instruction generation routines against
instrumentation
* A bunch of robustness improvements to our arch-specific selftests
* Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg
UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR
fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx
NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq
bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF
ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1
=hV+2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmOTQvYACgkQ4CHKc/GJ
qRCaqQf/UjCDmj1vYKcsTzp5L4MDXdQPA7dKtytbnZtROtClVNUzB0jODsfeMI7C
SwbDJRoUU1y99GRFYIx9oGji1q7TYOWS/PsZxOGkv8ILommmQ1kJdZdxt9rOqYNg
3mjCZoQmZMIRipLDrN55C096Mi+mI89kkE4Lkyrigpmxvc0KyX6QBerr+VmaBMHw
DjmFC6Gj+ZH2AX6z7AzOF1gZ42gPBQUjWdHFRcY41dShOQZNl2FPT5ITAvotlJlH
9mj6woCqW936UOcpUl+Qqk7mekDJb1hqmYXV2VAlhprBi6Vcd9PU6GmPPb6w51bS
HkSNNYjkbuNxBXY13PUPcR0hEHv9zw==
=AlWx
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLOB deprecation and SLUB_TINY
The SLOB allocator adds maintenance burden and stands in the way of
API improvements [1]. Deprecate it by renaming the config option (to
make users notice) to CONFIG_SLOB_DEPRECATED with updated help text.
SLUB should be used instead as SLAB will be the next on the removal
list.
Based on reports from a riscv k210 board with 8MB RAM, add a
CONFIG_SLUB_TINY option to minimize SLUB's memory usage at the
expense of scalability. This has resolved the k210 regression [2] so
in case there are no others (that wouldn't be resolvable by further
tweaks to SLUB_TINY) plan is to remove SLOB in a few cycles.
Existing defconfigs with CONFIG_SLOB are converted to
CONFIG_SLUB_TINY.
- kmalloc() slub_debug redzone improvements
A series from Feng Tang that builds on the tracking or requested size
for kmalloc() allocations (for caches with debugging enabled) added
in 6.1, to make redzone checks consider the requested size and not
the rounded up one, in order to catch more subtle buffer overruns.
Includes new slub_kunit test.
- struct slab fields reordering to accomodate larger rcu_head
RCU folks would like to grow rcu_head with debugging options, which
breaks current struct slab layout's assumptions, so reorganize it to
make this possible.
- Miscellaneous improvements/fixes:
- __alloc_size checking compiler workaround (Kees Cook)
- Optimize and cleanup SLUB's sysfs init (Rasmus Villemoes)
- Make SLAB compatible with PROVE_RAW_LOCK_NESTING (Jiri Kosina)
- Correct SLUB's percpu allocation estimates (Baoquan He)
- Re-enableS LUB's run-time failslab sysfs control (Alexander Atanasov)
- Make tools/vm/slabinfo more user friendly when not run as root (Rong Tao)
- Dead code removal in SLUB (Hyeonggon Yoo)
* tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits)
mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED
mm, slub: don't aggressively inline with CONFIG_SLUB_TINY
mm, slub: remove percpu slabs with CONFIG_SLUB_TINY
mm, slub: split out allocations from pre/post hooks
mm/slub, kunit: Add a test case for kmalloc redzone check
mm/slub, kunit: add SLAB_SKIP_KFENCE flag for cache creation
mm, slub: refactor free debug processing
mm, slab: ignore SLAB_RECLAIM_ACCOUNT with CONFIG_SLUB_TINY
mm, slub: don't create kmalloc-rcl caches with CONFIG_SLUB_TINY
mm, slub: lower the default slub_max_order with CONFIG_SLUB_TINY
mm, slub: retain no free slabs on partial list with CONFIG_SLUB_TINY
mm, slub: disable SYSFS support with CONFIG_SLUB_TINY
mm, slub: add CONFIG_SLUB_TINY
mm, slab: ignore hardened usercopy parameters when disabled
slab: Remove special-casing of const 0 size allocations
slab: Clean up SLOB vs kmalloc() definition
mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head
mm/migrate: make isolate_movable_page() skip slab pages
mm/slab: move and adjust kernel-doc for kmem_cache_alloc
mm/slub, percpu: correct the calculation of early percpu allocation size
...
- Add timens support (when switching mm). This version has survived
in -next for the entire cycle (Andrei Vagin).
- Various small bug fixes, refactoring, and readability improvements
(Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin).
- Remove FOLL_FORCE for stack setup (Kees Cook).
- Whilespace cleanups (Rolf Eike Beer, Kees Cook).
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmOOjsgWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJqwED/9mjtKL2GwHOYKsfhtc0m4HVGBw
gxTEKuyo5mRwaRLg2bfuWe1OQfeGWQd9+IZ83Kr2ijzm4R16Gslv9i69Iwdf2tce
iFf2R+iR7On+zNokHxaNflRH9fMsZLobVFqzLvB73BUF82ybJlTR3WMnQhS6HZQB
Gse8jRfueOnVgKldRLlgdxIucPVsXYSoBS4B0nvIUuQn3aNzDNuuctMe/5NFK0ud
+TWMXtKzS3B9pcLTXy3e0bPk/Ptio18CBUEI+iLMAHswtNCoxx1ZCcuvnEcrd5Qr
h2WGaRvYJ7oSUXeEsqPKuDdhqEJQH2AQoX8FzvD+hyIutQJCJzVYlHvwGCqn/Km6
0Dalng9Pjb6z2LEie/N42LDXEQmLZO2WtJ4otpORJlsJ7ZkrLjB4u+hDU1JA/Q14
YPWvth3fMA5vAFKvGCtpEc7YdHmghmXCW+YGXOBm625fPYnwFSXOarHfow1RKNE5
MOM4l60WwzLIHgmr8AFUaLf8TbutXN+BKvbMRh2ToWzDYXEoywxAedHDyo4LVwEy
mZEca/3izT1ynBcyZg1t8shf4htgLjcPHqM0B+Hq0iNMIrwtecqAcYL/Oj6XssPx
OuQYv341KF9fV/hMy84GM2HMr0ygUmrP7b9x+PEvCwzWf/2Glaw6Z4rtCdYC+TjW
8ZWqPqEY+LRsZsL18Q==
=ZDYk
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Most are small refactorings and bug fixes, but three things stand out:
switching timens (which got reverted before) looks solid now,
FOLL_FORCE has been removed (no failures seen yet across several weeks
in -next), and some whitespace cleanups (which are long overdue).
- Add timens support (when switching mm). This version has survived
in -next for the entire cycle (Andrei Vagin)
- Various small bug fixes, refactoring, and readability improvements
(Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin)
- Remove FOLL_FORCE for stack setup (Kees Cook)
- Whitespace cleanups (Rolf Eike Beer, Kees Cook)"
* tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_misc: fix shift-out-of-bounds in check_special_flags
binfmt: Fix error return code in load_elf_fdpic_binary()
exec: Remove FOLL_FORCE for stack setup
binfmt_elf: replace IS_ERR() with IS_ERR_VALUE()
binfmt_elf: simplify error handling in load_elf_phdrs()
binfmt_elf: fix documented return value for load_elf_phdrs()
exec: simplify initial stack size expansion
binfmt: Fix whitespace issues
exec: Add comments on check_unsafe_exec() fs counting
ELF uapi: add spaces before '{'
selftests/timens: add a test for vfork+exit
fs/exec: switch timens when a task gets a new mm
This branch further improves nolibc testing.
-----BEGIN PGP SIGNATURE-----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=lTqG
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Further improvements to nolibc testing
* tag 'nolibc.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: Always rebuild the sysroot when running a test
selftests/nolibc: Add 7 tests for memcmp()
This series adds instrumentation for memcpy(), memset(), and memmove() for
Clang v16+'s new function names that are used when the -fsanitize=thread
argument is given. It also fixes objtool warnings from KCSAN's volatile
instrumentation, and fixes a pair of typos in a pair of Kconfig options'
help clauses.
-----BEGIN PGP SIGNATURE-----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=/aBz
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
- Add instrumentation for memcpy(), memset(), and memmove() for Clang
v16+'s new function names that are used when the -fsanitize=thread
argument is given
- Fix objtool warnings from KCSAN's volatile instrumentation, and typos
in a pair of Kconfig options' help clauses
* tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Fix trivial typo in Kconfig help comments
objtool, kcsan: Add volatile read/write instrumentation to whitelist
kcsan: Instrument memcpy/memset/memmove with newer Clang
This series updates LKMM documentation, both in English and in Korean.
-----BEGIN PGP SIGNATURE-----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=a3fB
-----END PGP SIGNATURE-----
Merge tag 'lkmm.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull kernel memory model documentation updates from Paul McKenney:
- Update the LKMM documentation, both in English and in Korean
* tag 'lkmm.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
docs/memory-barriers.txt/kokr: Fix confusing name of 'data dependency barrier'
docs/memory-barriers.txt/kokr: Add memory barrier dma_mb()
docs/memory-barriers.txt/kokr: introduce io_stop_wc() and add implementation for ARM64
docs/memory-barriers.txt: Add a missed closing parenthesis
tools/memory-model: Weaken ctrl dependency definition in explanation.txt
This pull request contains the following branches:
doc.2022.10.20a: Documentation updates. This is the second
in a series from an ongoing review of the RCU documentation.
fixes.2022.10.21a: Miscellaneous fixes.
lazy.2022.11.30a: Introduces a default-off Kconfig option that depends
on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or
rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce
delays. These delays result in significant power savings on
nearly idle Android and ChromeOS systems. These savings range
from a few percent to more than ten percent.
This series also includes several commits that change call_rcu()
to a new call_rcu_hurry() function that avoids these delays in
a few cases, for example, where timely wakeups are required.
Several of these are outside of RCU and thus have acks and
reviews from the relevant maintainers.
srcunmisafe.2022.11.09a: Creates an srcu_read_lock_nmisafe() and an
srcu_read_unlock_nmisafe() for architectures that support NMIs,
but which do not provide NMI-safe this_cpu_inc(). These NMI-safe
SRCU functions are required by the upcoming lockless printk()
work by John Ogness et al.
That printk() series depends on these commits, so if you pull
the printk() series before this one, you will have already
pulled in this branch, plus two more SRCU commits:
0cd7e350ab ("rcu: Make SRCU mandatory")
51f5f78a4f ("srcu: Make Tiny synchronize_srcu() check for readers")
These two commits appear to work well, but do not have
sufficient testing exposure over a long enough time for me to
feel comfortable pushing them unless something in mainline is
definitely going to use them immediately, and currently only
the new printk() work uses them.
torture.2022.10.18c: Changes providing minor but important increases
in test coverage for the new RCU polled-grace-period APIs.
torturescript.2022.10.20a: Changes that avoid redundant kernel builds,
thus providing about a 30% speedup for the torture.sh acceptance
test.
-----BEGIN PGP SIGNATURE-----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=eMOr
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates. This is the second in a series from an ongoing
review of the RCU documentation.
- Miscellaneous fixes.
- Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
CPU lists, causes call_rcu() to introduce delays.
These delays result in significant power savings on nearly idle
Android and ChromeOS systems. These savings range from a few percent
to more than ten percent.
This series also includes several commits that change call_rcu() to a
new call_rcu_hurry() function that avoids these delays in a few
cases, for example, where timely wakeups are required. Several of
these are outside of RCU and thus have acks and reviews from the
relevant maintainers.
- Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
for architectures that support NMIs, but which do not provide
NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
by the upcoming lockless printk() work by John Ogness et al.
- Changes providing minor but important increases in torture test
coverage for the new RCU polled-grace-period APIs.
- Changes to torturescript that avoid redundant kernel builds, thus
providing about a 30% speedup for the torture.sh acceptance test.
* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
net: devinet: Reduce refcount before grace period
net: Use call_rcu_hurry() for dst_release()
workqueue: Make queue_rcu_work() use call_rcu_hurry()
percpu-refcount: Use call_rcu_hurry() for atomic switch
scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
rcu/rcutorture: Use call_rcu_hurry() where needed
rcu/rcuscale: Use call_rcu_hurry() for async reader test
rcu/sync: Use call_rcu_hurry() instead of call_rcu
rcuscale: Add laziness and kfree tests
rcu: Shrinker for lazy rcu
rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
rcu: Make call_rcu() lazy to save power
rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
srcu: Debug NMI safety even on archs that don't require it
srcu: Explain the reason behind the read side critical section on GP start
srcu: Warn when NMI-unsafe API is used in NMI
arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
rcu-tasks: Make grace-period-age message human-readable
...
Merge devfreq updates and cpupower utility updates for 6.2-rc1:
- Add a private governor_data for devfreq governors (Kant Fan).
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi).
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar).
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli).
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger).
* pm-devfreq:
PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
PM / devfreq: event: Use device_match_of_node()
PM / devfreq: Use device_match_of_node()
PM/devfreq: governor: Add a private governor_data for governor
* pm-tools:
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
tools/cpupower: Choose base_cpu to display default cpupower details
Merge cpuidle changes, updates related to system sleep amd generic power
domains code fixes for 6.2-rc1:
- Improve kernel messages printed by the cpuidle PCI driver (Ulf
Hansson).
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson).
- Modify the tasks freezing code to avoid using pr_cont() and refine an
error message printed by it (Rafael Wysocki).
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo).
- Fix mistake in a kerneldoc comment in the hibernation code (xiongxin).
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa).
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the
generic power domains code (Abel Vesa).
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo).
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo).
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo).
* pm-cpuidle:
cpuidle: dt: Clarify a comment and simplify code in dt_init_idle_driver()
cpuidle: dt: Return the correct numbers of parsed idle states
cpuidle: psci: Extend information in log about OSI/PC mode
* pm-sleep:
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: hibernate: Complain about memory map mismatches during resume
PM: hibernate: Fix mistake in kerneldoc comment
* pm-domains:
PM: domains: Reverse the order of performance and enabling ops
PM: domains: Power off[on] domain in hibernate .freeze[thaw]_noirq hook
PM: domains: Consolidate genpd_restore_noirq() and genpd_resume_noirq()
PM: domains: Pass generic PM noirq hooks to genpd_finish_suspend()
PM: domains: Drop genpd status manipulation for hibernate restore
Merge ACPICA changes, including bug fixes and cleanups as well as support
for some recently defined data structures, for 6.2-rc1:
- Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki).
- Add support for loong_arch-specific APICs in MADT (Huacai Chen).
- Add support for fixed PCIe wake event (Huacai Chen).
- Add EBDA pointer sanity checks (Vit Kabele).
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
- Add a couple of new UUIDs to the known UUID list (Bob Moore).
- Add support for FFH Opregion special context data (Sudeep Holla).
- Improve warning message for "invalid ACPI name" (Bob Moore).
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table
(Alison Schofield).
- Prepare IORT support for revision E.e (Robin Murphy).
- Finish support for the CDAT table (Bob Moore).
- Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki).
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao).
- Update the version of the ACPICA code in the kernel (Bob Moore).
* acpica:
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPICA: Fix error code path in acpi_ds_call_control_method()
ACPICA: Update version to 20221020
ACPICA: Add utcksum.o to the acpidump Makefile
Revert "LoongArch: Provisionally add ACPICA data structures"
ACPICA: Finish support for the CDAT table
ACPICA: IORT: Update for revision E.e
ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table
ACPICA: Improve warning message for "invalid ACPI name"
ACPICA: Add support for FFH Opregion special context data
ACPICA: Add a couple of new UUIDs to the known UUID list
ACPICA: iASL: Add CCEL table to both compiler/disassembler
ACPICA: Do not touch VGA memory when EBDA < 1ki_b
ACPICA: Check that EBDA pointer is in valid memory
ACPICA: Events: Support fixed PCIe wake event
ACPICA: MADT: Add loong_arch-specific APICs support
ACPICA: Make acpi_ex_load_op() match upstream
The test currently fails on 32bit. Fixing the "-1ull" vs. "-1ul" seems
to make the test pass and the compiler happy.
Note: This test is not in mm-stable yet. This fix should be squashed into
"selftests/vm: add KSM unmerge tests".
Link: https://lkml.kernel.org/r/20221205193716.276024-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The compiler complains about the conversion of a pointer to an int of
different width.
Link: https://lkml.kernel.org/r/20221205193716.276024-4-david@redhat.com
Fixes: 6f1405efc6 ("selftests/vm: anon_cow: add R/O longterm tests via gup_test")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The tests fail to compile in some environments (e.g., Debian 11.5 on x86).
Let's simply conditionally define MADV_POPULATE_(READ|WRITE) if not
already defined, similar to how the khugepaged.c test handles it.
Link: https://lkml.kernel.org/r/20221205193716.276024-3-david@redhat.com
Fixes: 39b2e5cae4 ("selftests/vm: make MADV_POPULATE_(READ|WRITE) use in-tree headers")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make sure that we ignore protection of a memcg that is the target of memcg
reclaim.
Link: https://lkml.kernel.org/r/20221202031512.1365483-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Chris Down <chris@chrisdown.name>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refactor the code that drives writing to memory.reclaim (retrying, error
handling, etc) from test_memcg_reclaim() to a helper called
reclaim_until(), which proactively reclaims from a memcg until its usage
reaches a certain value.
While we are at it, refactor and simplify the reclaim loop.
This will be used in a following patch in another test.
Link: https://lkml.kernel.org/r/20221202031512.1365483-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Chris Down <chris@chrisdown.name>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A DAMON sysfs user could start DAMON with a scheme, remove the sysfs
directory for the scheme, and then ask stats or schemes tried regions
update. The related logic were not aware of the already removed directory
situation, so it was able to results in invalid memory accesses. The fix
has made with commit 8468b48661 ("mm/damon/sysfs-schemes: skip stats
update if the scheme directory is removed"), though. Add a selftest to
prevent such kinds of bugs from being introduced again.
Link: https://lkml.kernel.org/r/20221201170834.62823-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's add a test to measure performance of KSM breaking not triggered via
COW, but triggered by disabling KSM on an area filled with KSM pages via
MADV_UNMERGEABLE.
Link: https://lkml.kernel.org/r/20221021101141.84170-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/ksm: break_ksm() cleanups and fixes", v2.
This series cleans up and fixes break_ksm(). In summary, we no longer use
fake write faults to break COW but instead FAULT_FLAG_UNSHARE. Further,
we move away from using follow_page() --- that we can hopefully remove
completely at one point --- and use new walk_page_range_vma() instead.
Fortunately, we can get rid of VM_FAULT_WRITE and FOLL_MIGRATION in common
code now.
Extend the existing ksm tests by an unmerge benchmark, and a some new
unmerge tests.
Also, add a selftest to measure MADV_UNMERGEABLE performance. In my setup
(AMD Ryzen 9 3900X), running the KSM selftest to test unmerge performance
on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in a
performance degradation of ~6% -- 7% (old: ~5250 MiB/s, new: ~4900 MiB/s).
I don't think we particularly care for now, but it's good to be aware of
the implication.
This patch (of 9):
Let's add three unmerge tests (MADV_UNMERGEABLE unmerging all pages in the
range).
test_unmerge(): basic unmerge tests
test_unmerge_discarded(): have some pte_none() entries in the range
test_unmerge_uffd_wp(): protect the merged pages using uffd-wp
ksm_tests.c currently contains a mixture of benchmarks and tests, whereby
each test is carried out by executing the ksm_tests binary with specific
parameters. Let's add new ksm_functional_tests.c that performs multiple,
smaller functional tests all at once.
Link: https://lkml.kernel.org/r/20221021101141.84170-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221021101141.84170-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Our memory management kernel CI testing at Red Hat uses the VM
selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall
failure/ambiguous results in the case that a machine lacks the necessary
hardware to perform one or more of the tests. E.g. ksm tests that
require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh
instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script
is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ]
usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
-t: specify specific categories to tests to run
-h: display this message
The default behavior is to run all tests.
Alternatively, specific groups tests can be run by passing a string
to the -t argument containing one or more of the following categories
separated by spaces:
- mmap
tests for mmap(2)
- gup_test
tests for gup using gup_test interface
- userfaultfd
tests for userfaultfd(2)
- compaction
a test for the patch "Allow compaction of unevictable pages"
- mlock
tests for mlock(2)
- mremap
tests for mremap(2)
- hugevm
tests for very large virtual address space
- vmalloc
vmalloc smoke tests
- hmm
hmm smoke tests
- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options
- memfd_secret
test memfd_secret(2)
- process_mrelease
test process_mrelease(2)
- ksm
ksm tests that do not require >=2 NUMA nodes
- ksm_numa
ksm tests that require >=2 NUMA nodes
- pkey
memory protection key tests
- soft_dirty
test soft dirty page bit semantics
- anon_cow
test anonymous copy-on-write semantics
example: ./run_vmtests.sh -t "hmm mmap ksm"
Link: https://lkml.kernel.org/r/20221018231222.1884715-1-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
post-6.0 issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5Ur2AAKCRDdBJ7gKXxA
jsGmAQDWSq6z9fVgk30XpMr/X7t5c6NTPw5GocVpdwG8iqch3gEAjEs5/Kcd/mx4
d1dLaJFu1u3syessp8nJrNr1HANIog8=
=L8zu
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes.
Six for MM, three for other areas. Four of these patches address
post-6.0 issues"
* tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
memcg: fix possible use-after-free in memcg_write_event_control()
MAINTAINERS: update Muchun Song's email
mm/gup: fix gup_pud_range() for dax
mmap: fix do_brk_flags() modifying obviously incorrect VMAs
mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit
tmpfs: fix data loss from failed fallocate
kselftests: cgroup: update kmem test precision tolerance
mm: do not BUG_ON missing brk mapping, because userspace can unmap it
mailmap: update Matti Vaittinen's email address
Check that verifier.c:states_equal() uses check_ids() to match
consistent active_lock/map_value configurations. This allows to prune
states with active spin locks even if numerical values of
active_lock ids do not match across compared states.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221209135733.28851-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that when reg->id is not same for the same register of type
PTR_TO_MAP_VALUE between current and old explored state, we currently
return false from regsafe and continue exploring.
Without the fix in prior commit, the test case fails.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221209135733.28851-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A test case that would erroneously pass verification if
verifier.c:states_equal() maintains separate register ID mappings for
call frames.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221209135733.28851-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Under certain conditions it was possible for verifier.c:regsafe() to
skip check_id() call. This commit adds negative test cases previously
errorneously accepted as safe.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221209135733.28851-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
1813e51eec ("memcg: increase MEMCG_CHARGE_BATCH to 64") has changed
the batch size while this test case has been left behind. This has led
to a test failure reported by test bot:
not ok 2 selftests: cgroup: test_kmem # exit=1
Update the tolerance for the pcp charges to reflect the
MEMCG_CHARGE_BATCH change to fix this.
[akpm@linux-foundation.org: update comments, per Roman]
Link: https://lkml.kernel.org/r/Y4m8Unt6FhWKC6IH@dhcp22.suse.cz
Fixes: 1813e51eec ("memcg: increase MEMCG_CHARGE_BATCH to 64")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212010958.c1053bd3-yujie.liu@intel.com
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add the ability to control and trace in-kernel monitors. This is
a generic interface, it will check for existing monitors and enable
standard setup, like enabling reactors.
For example:
# rv list
wip wakeup in preemptive per-cpu testing monitor. [OFF]
wwnr wakeup while not running per-task testing model. [OFF]
# rv mon wwnr --help
rv version 6.1.0-rc4: help
usage: rv mon wwnr [-h] [-q] [-r reactor] [-s] [-v]
-h/--help: print this menu and the reactor list
-r/--reactor 'reactor': enables the 'reactor'
-s/--self: when tracing (-t), also trace rv command
-t/--trace: trace monitor's event
-v/--verbose: print debug messages
available reactors: nop printk panic
# rv mon wwnr --trace
<TASK>-PID [CPU] TYPE ID STATE x EVENT -> NEXT_STATE FINAL
| | | | | | | | |
rv-3613 [001] event 3613 running x switch_out -> not_running Y
sshd-1248 [005] event 1248 running x switch_out -> not_running Y
<idle>-0 [005] event 71 not_running x wakeup -> not_running Y
<idle>-0 [005] event 71 not_running x switch_in -> running N
kcompactd0-71 [005] event 71 running x switch_out -> not_running Y
<idle>-0 [000] event 860 not_running x wakeup -> not_running Y
<idle>-0 [000] event 860 not_running x switch_in -> running N
systemd-oomd-860 [000] event 860 running x switch_out -> not_running Y
<idle>-0 [000] event 860 not_running x wakeup -> not_running Y
<idle>-0 [000] event 860 not_running x switch_in -> running N
systemd-oomd-860 [000] event 860 running x switch_out -> not_running Y
<idle>-0 [005] event 71 not_running x wakeup -> not_running Y
<idle>-0 [005] event 71 not_running x switch_in -> running N
kcompactd0-71 [005] event 71 running x switch_out -> not_running Y
<idle>-0 [000] event 860 not_running x wakeup -> not_running Y
<idle>-0 [000] event 860 not_running x switch_in -> running N
systemd-oomd-860 [000] event 860 running x switch_out -> not_running Y
<idle>-0 [001] event 3613 not_running x wakeup -> not_running Y
Link: https://lkml.kernel.org/r/1e57547e3acadda6e23949b2672c89e76ec2ec42.1668180100.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This is the (user-space) runtime verification tool, named rv.
This tool aims to be the interface for in-kernel rv monitors, as
well as the home for monitors in user-space (online asynchronous),
and in *eBPF.
The tool receives a command as the first argument, the current
commands are:
list - list all available monitors
mon - run a given monitor
Each monitor is an independent piece of software inside the
tool and can have their own arguments.
There is no monitor implemented in this patch, it only
adds the basic structure of the tool, based on rtla.
# rv --help
rv version 6.1.0-rc4: help
usage: rv command [-h] [command_options]
-h/--help: print this menu
command: run one of the following command:
list: list all available monitors
mon: run a monitor
[command options]: each command has its own set of options
run rv command -h for further information
*dot2bpf is the next patch set, depends on this, doing cleanups.
Link: https://lkml.kernel.org/r/fb51184f3b95aea0d7bfdc33ec09f4153aee84fa.1668180100.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
rtla_usage(), osnoise_usage() and timerlat_usage() all exit with an
error status.
However when these are called from help, they should exit with a
non-error status.
Fix this by passing the exit status to the functions.
Note, although we remove the subsequent call to exit after calling
usage, we leave it in at the end of a function to suppress the compiler
warning "control reaches end of a non-void function".
Link: https://lkml.kernel.org/r/20221107144313.22470-1-jkacur@redhat.com
Signed-off-by: John Kacur <jkacur@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
MEM_REGION_TEST_DATA is meant to hold data explicitly used by a
selftest, not implicit allocations due to the selftests infrastructure.
Allocate the ucall pool from MEM_REGION_DATA much like the rest of the
selftests library allocations.
Fixes: 426729b2cf ("KVM: selftests: Add ucall pool based implementation")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221207214809.489070-5-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An interesting feature of the Arm architecture is that the stage-1 MMU
supports two distinct VA regions, controlled by TTBR{0,1}_EL1. As KVM
selftests on arm64 only uses TTBR0_EL1, the VA space is constrained to
[0, 2^(va_bits-1)). This is different from other architectures that
allow for addressing low and high regions of the VA space from a single
page table.
KVM selftests' VA space allocator presumes the valid address range is
split between low and high memory based the MSB, which of course is a
poor match for arm64's TTBR0 region.
Allow architectures to override the default VA space layout. Make use of
the override to align vpages_valid with the behavior of TTBR0 on arm64.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221207214809.489070-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
-----BEGIN PGP SIGNATURE-----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=iIPT
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
Allow variables to execute shell commands. Note, these are processed when
they are first seen while parsing the config file. This is useful if you
have the same config file used for multiple hosts (as they may be in a git
repository).
HOSTNAME := ${shell hostname}
DEFAULTS IF "${HOSTNAME}" == "frodo"
Link: https://lkml.kernel.org/r/20221207212944.277ee850@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The BPF Makefile in net/bpf did incorrect path substitution for O=dir
builds, e.g.
make O=/tmp/kselftest headers
make O=/tmp/kselftest -C tools/testing/selftests
would fail in selftest builds [1] net/ with
clang-16: error: no such file or directory: 'kselftest/net/bpf/nat6to4.c'
clang-16: error: no input files
Add a pattern prerequisite and an order-only-prerequisite (for
creating the directory), to resolve the issue.
[1] https://lore.kernel.org/all/202212060009.34CkQmCN-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 837a3d66d6 ("selftests: net: Add cross-compilation support for BPF programs")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20221206102838.272584-1-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that Spectrum-1 gained ip6gre support we can move the test out of
the Spectrum-2 directory.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original support for bpf_user_ringbuf_drain callbacks simply
short-circuited checks for the dynptr state, allowing users to pass
PTR_TO_DYNPTR (now CONST_PTR_TO_DYNPTR) to helpers that initialize a
dynptr. This bug would have also surfaced with other dynptr helpers in
the future that changed dynptr view or modified it in some way.
Include test cases for all cases, i.e. both bpf_dynptr_from_mem and
bpf_ringbuf_reserve_dynptr, and ensure verifier rejects both of them.
Without the fix, both of these programs load and pass verification.
While at it, remove sys_nanosleep target from failure cases' SEC
definition, as there is no such tracepoint.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While check_func_arg_reg_off is the place which performs generic checks
needed by various candidates of reg->type, there is some handling for
special cases, like ARG_PTR_TO_DYNPTR, OBJ_RELEASE, and
ARG_PTR_TO_RINGBUF_MEM.
This commit aims to streamline these special cases and instead leave
other things up to argument type specific code to handle. The function
will be restrictive by default, and cover all possible cases when
OBJ_RELEASE is set, without having to update the function again (and
missing to do that being a bug).
This is done primarily for two reasons: associating back reg->type to
its argument leaves room for the list getting out of sync when a new
reg->type is supported by an arg_type.
The other case is ARG_PTR_TO_RINGBUF_MEM. The problem there is something
we already handle, whenever a release argument is expected, it should
be passed as the pointer that was received from the acquire function.
Hence zero fixed and variable offset.
There is nothing special about ARG_PTR_TO_RINGBUF_MEM, where technically
its target register type PTR_TO_MEM | MEM_RINGBUF can already be passed
with non-zero offset to other helper functions, which makes sense.
Hence, lift the arg_type_is_release check for reg->off and cover all
possible register types, instead of duplicating the same kind of check
twice for current OBJ_RELEASE arg_types (alloc_mem and ptr_to_btf_id).
For the release argument, arg_type_is_dynptr is the special case, where
we go to actual object being freed through the dynptr, so the offset of
the pointer still needs to allow fixed and variable offset and
process_dynptr_func will verify them later for the release argument case
as well.
This is not specific to ARG_PTR_TO_DYNPTR though, we will need to make
this exception for any future object on the stack that needs to be
released. In this sense, PTR_TO_STACK as a candidate for object on stack
argument is a special case for release offset checks, and they need to
be done by the helper releasing the object on stack.
Since the check has been lifted above all register type checks, remove
the duplicated check that is being done for PTR_TO_BTF_ID.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, user ringbuf support introduced a PTR_TO_DYNPTR register type
for use in callback state, because in case of user ringbuf helpers,
there is no dynptr on the stack that is passed into the callback. To
reflect such a state, a special register type was created.
However, some checks have been bypassed incorrectly during the addition
of this feature. First, for arg_type with MEM_UNINIT flag which
initialize a dynptr, they must be rejected for such register type.
Secondly, in the future, there are plans to add dynptr helpers that
operate on the dynptr itself and may change its offset and other
properties.
In all of these cases, PTR_TO_DYNPTR shouldn't be allowed to be passed
to such helpers, however the current code simply returns 0.
The rejection for helpers that release the dynptr is already handled.
For fixing this, we take a step back and rework existing code in a way
that will allow fitting in all classes of helpers and have a coherent
model for dealing with the variety of use cases in which dynptr is used.
First, for ARG_PTR_TO_DYNPTR, it can either be set alone or together
with a DYNPTR_TYPE_* constant that denotes the only type it accepts.
Next, helpers which initialize a dynptr use MEM_UNINIT to indicate this
fact. To make the distinction clear, use MEM_RDONLY flag to indicate
that the helper only operates on the memory pointed to by the dynptr,
not the dynptr itself. In C parlance, it would be equivalent to taking
the dynptr as a point to const argument.
When either of these flags are not present, the helper is allowed to
mutate both the dynptr itself and also the memory it points to.
Currently, the read only status of the memory is not tracked in the
dynptr, but it would be trivial to add this support inside dynptr state
of the register.
With these changes and renaming PTR_TO_DYNPTR to CONST_PTR_TO_DYNPTR to
better reflect its usage, it can no longer be passed to helpers that
initialize a dynptr, i.e. bpf_dynptr_from_mem, bpf_ringbuf_reserve_dynptr.
A note to reviewers is that in code that does mark_stack_slots_dynptr,
and unmark_stack_slots_dynptr, we implicitly rely on the fact that
PTR_TO_STACK reg is the only case that can reach that code path, as one
cannot pass CONST_PTR_TO_DYNPTR to helpers that don't set MEM_RDONLY. In
both cases such helpers won't be setting that flag.
The next patch will add a couple of selftest cases to make sure this
doesn't break.
Fixes: 2057156738 ("bpf: Add bpf_user_ringbuf_drain() helper")
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ARG_PTR_TO_DYNPTR is akin to ARG_PTR_TO_TIMER, ARG_PTR_TO_KPTR, where
the underlying register type is subjected to more special checks to
determine the type of object represented by the pointer and its state
consistency.
Move dynptr checks to their own 'process_dynptr_func' function so that
is consistent and in-line with existing code. This also makes it easier
to reuse this code for kfunc handling.
Then, reuse this consolidated function in kfunc dynptr handling too.
Note that for kfuncs, the arg_type constraint of DYNPTR_TYPE_LOCAL has
been lifted.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - new code bugs:
- bonding: ipv6: correct address used in Neighbour Advertisement
parsing (src vs dst typo)
- fec: properly scope IRQ coalesce setup during link up to supported
chips only
Previous releases - regressions:
- Bluetooth fixes for fake CSR clones (knockoffs):
- re-add ERR_DATA_REPORTING quirk
- fix crash when device is replugged
- Bluetooth:
- silence a user-triggerable dmesg error message
- L2CAP: fix u8 overflow, oob access
- correct vendor codec definition
- fix support for Read Local Supported Codecs V2
- ti: am65-cpsw: fix RGMII configuration at SPEED_10
- mana: fix race on per-CQ variable NAPI work_done
Previous releases - always broken:
- af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
avoid null-deref
- af_can: fix NULL pointer dereference in can_rcv_filter
- can: slcan: fix UAF with a freed work
- can: can327: flush TX_work on ldisc .close()
- macsec: add missing attribute validation for offload
- ipv6: avoid use-after-free in ip6_fragment()
- nft_set_pipapo: actually validate intervals in fields
after the first one
- mvneta: prevent oob access in mvneta_config_rss()
- ipv4: fix incorrect route flushing when table ID 0 is used,
or when source address is deleted
- phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+mCl
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, can and netfilter.
Current release - new code bugs:
- bonding: ipv6: correct address used in Neighbour Advertisement
parsing (src vs dst typo)
- fec: properly scope IRQ coalesce setup during link up to supported
chips only
Previous releases - regressions:
- Bluetooth fixes for fake CSR clones (knockoffs):
- re-add ERR_DATA_REPORTING quirk
- fix crash when device is replugged
- Bluetooth:
- silence a user-triggerable dmesg error message
- L2CAP: fix u8 overflow, oob access
- correct vendor codec definition
- fix support for Read Local Supported Codecs V2
- ti: am65-cpsw: fix RGMII configuration at SPEED_10
- mana: fix race on per-CQ variable NAPI work_done
Previous releases - always broken:
- af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
avoid null-deref
- af_can: fix NULL pointer dereference in can_rcv_filter
- can: slcan: fix UAF with a freed work
- can: can327: flush TX_work on ldisc .close()
- macsec: add missing attribute validation for offload
- ipv6: avoid use-after-free in ip6_fragment()
- nft_set_pipapo: actually validate intervals in fields after the
first one
- mvneta: prevent oob access in mvneta_config_rss()
- ipv4: fix incorrect route flushing when table ID 0 is used, or when
source address is deleted
- phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C"
* tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()
s390/qeth: fix use-after-free in hsci
macsec: add missing attribute validation for offload
net: mvneta: Fix an out of bounds check
net: thunderbolt: fix memory leak in tbnet_open()
ipv6: avoid use-after-free in ip6_fragment()
net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
net: phy: mxl-gpy: add MDINT workaround
net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
xen/netback: don't call kfree_skb() under spin_lock_irqsave()
dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove()
ethernet: aeroflex: fix potential skb leak in greth_init_rings()
tipc: call tipc_lxc_xmit without holding node_read_lock
can: esd_usb: Allow REC and TEC to return to zero
can: can327: flush TX_work on ldisc .close()
can: slcan: fix freed work crash
can: af_can: fix NULL pointer dereference in can_rcv_filter
net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions()
ipv4: Fix incorrect route flushing when table ID 0 is used
ipv4: Fix incorrect route flushing when source address is deleted
...
Bpftool has new extra libbpf_det_bind probing map we need to exclude.
Also skip trying to load netdevsim modules if it's already loaded (builtin).
v2:
- drop iproute2->bpftool changes (Toke)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221206232739.2504890-1-sdf@google.com
grub2 has submenus where to use grub-reboot, it requires:
grub-reboot X>Y
where X is the main index and Y is the submenu. Thus if you have:
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux ...
[...]
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option ...
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64 (recovery mode)' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux test' --class debian --class gnu-linux ...
[...]
}
And wanted to boot to the "Linux test" kernel, you need to run:
# grub-reboot 1>2
As 1 is the second top menu (the submenu) and 2 is the third of the sub
menu entries.
Have the grub.cfg parsing for grub2 handle such cases.
Cc: stable@vger.kernel.org
Fixes: a15ba91361 ("ktest: Add support for grub2")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
After a full run of a make_min_config test, I noticed there were a lot of
CONFIGs still enabled that really should not be. Looking at them, I
noticed they were all defined as "default y". The issue is that the test
simple removes the config and re-runs make oldconfig, which enables it
again because it is set to default 'y'. Instead, explicitly disable the
config with writing "# CONFIG_FOO is not set" to the file to keep it from
being set again.
With this change, one of my box's minconfigs went from 768 configs set,
down to 521 configs set.
Link: https://lkml.kernel.org/r/20221202115936.016fce23@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 0a05c769a9 ("ktest: Added config_bisect test type")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Convert big chunks of dynptr and map_kptr subtests to use generic
verification_tester. They are switched from using manually maintained
tables of test cases, specifying program name and expected error
verifier message, to btf_decl_tag-based annotations directly on
corresponding BPF programs: __failure to specify that BPF program is
expected to fail verification, and __msg() to specify expected log
message.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207201648.2990661-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's become a common pattern to have a collection of small BPF programs
in one BPF object file, each representing one test case. On user-space
side of such tests we maintain a table of program names and expected
failure or success, along with optional expected verifier log message.
This works, but each set of tests reimplement this mundane code over and
over again, which is a waste of time for anyone trying to add a new set
of tests. Furthermore, it's quite error prone as it's way too easy to miss
some entries in these manually maintained test tables (as evidences by
dynptr_fail tests, in which ringbuf_release_uninit_dynptr subtest was
accidentally missed; this is fixed in next patch).
So this patch implements generic test_loader, which accepts skeleton
name and handles the rest of details: opens and loads BPF object file,
making sure each program is tested in isolation. Optionally each test
case can specify expected BPF verifier log message. In case of failure,
tester makes sure to report verifier log, but it also reports verifier
log in verbose mode unconditionally.
Now, the interesting deviation from existing custom implementations is
the use of btf_decl_tag attribute to specify expected-to-fail vs
expected-to-succeed markers and, optionally, expected log message
directly next to BPF program source code, eliminating the need to
manually create and update table of tests.
We define few macros wrapping btf_decl_tag with a convention that all
values of btf_decl_tag start with "comment:" prefix, and then utilizing
a very simple "just_some_text_tag" or "some_key_name=<value>" pattern to
define things like expected success/failure, expected verifier message,
extra verifier log level (if necessary). This approach is demonstrated
by next patch in which two existing sets of failure tests are converted.
Tester supports both expected-to-fail and expected-to-succeed programs,
though this patch set didn't convert any existing expected-to-succeed
programs yet, as existing tests couple BPF program loading with their
further execution through attach or test_prog_run. One way to allow
testing scenarios like this would be ability to specify custom callback,
executed for each successfully loaded BPF program. This is left for
follow up patches, after some more analysis of existing test cases.
This test_loader is, hopefully, a start of a test_verifier-like runner,
but integrated into test_progs infrastructure. It will allow much better
"user experience" of defining low-level verification tests that can take
advantage of all the libbpf-provided nicety features on BPF side: global
variables, declarative maps, etc. All while having a choice of defining
it in C or as BPF assembly (through __attribute__((naked)) functions and
using embedded asm), depending on what makes most sense in each
particular case. This will be explored in follow up patches as well.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221207201648.2990661-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cited commit added the table ID to the FIB info structure, but did not
properly initialize it when table ID 0 is used. This can lead to a route
in the default VRF with a preferred source address not being flushed
when the address is deleted.
Consider the following example:
# ip address add dev dummy1 192.0.2.1/28
# ip address add dev dummy1 192.0.2.17/28
# ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100
# ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Both routes are installed in the default VRF, but they are using two
different FIB info structures. One with a metric of 100 and table ID of
254 (main) and one with a metric of 200 and table ID of 0. Therefore,
when the preferred source address is deleted from the default VRF,
the second route is not flushed:
# ip address del dev dummy1 192.0.2.17/28
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Fix by storing a table ID of 254 instead of 0 in the route configuration
structure.
Add a test case that fails before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [FAIL]
Tests passed: 8
Tests failed: 1
And passes after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [ OK ]
Tests passed: 9
Tests failed: 0
Fixes: 5a56a0b3a4 ("net: Don't delete routes in different VRFs")
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit added the table ID to the FIB info structure, but did not
prevent structures with different table IDs from being consolidated.
This can lead to routes being flushed from a VRF when an address is
deleted from a different VRF.
Fix by taking the table ID into account when looking for a matching FIB
info. This is already done for FIB info structures backed by a nexthop
object in fib_find_info_nh().
Add test cases that fail before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [FAIL]
TEST: Route in default VRF not removed [ OK ]
RTNETLINK answers: File exists
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [FAIL]
Tests passed: 6
Tests failed: 2
And pass after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Tests passed: 8
Tests failed: 0
Fixes: 5a56a0b3a4 ("net: Don't delete routes in different VRFs")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A series of prior patches added some kfuncs that allow struct
task_struct * objects to be used as kptrs. These kfuncs leveraged the
'refcount_t rcu_users' field of the task for performing refcounting.
This field was used instead of 'refcount_t usage', as we wanted to
leverage the safety provided by RCU for ensuring a task's lifetime.
A struct task_struct is refcounted by two different refcount_t fields:
1. p->usage: The "true" refcount field which task lifetime. The
task is freed as soon as this refcount drops to 0.
2. p->rcu_users: An "RCU users" refcount field which is statically
initialized to 2, and is co-located in a union with
a struct rcu_head field (p->rcu). p->rcu_users
essentially encapsulates a single p->usage
refcount, and when p->rcu_users goes to 0, an RCU
callback is scheduled on the struct rcu_head which
decrements the p->usage refcount.
Our logic was that by using p->rcu_users, we would be able to use RCU to
safely issue refcount_inc_not_zero() a task's rcu_users field to
determine if a task could still be acquired, or was exiting.
Unfortunately, this does not work due to p->rcu_users and p->rcu sharing
a union. When p->rcu_users goes to 0, an RCU callback is scheduled to
drop a single p->usage refcount, and because the fields share a union,
the refcount immediately becomes nonzero again after the callback is
scheduled.
If we were to split the fields out of the union, this wouldn't be a
problem. Doing so should also be rather non-controversial, as there are
a number of places in struct task_struct that have padding which we
could use to avoid growing the structure by splitting up the fields.
For now, so as to fix the kfuncs to be correct, this patch instead
updates bpf_task_acquire() and bpf_task_release() to use the p->usage
field for refcounting via the get_task_struct() and put_task_struct()
functions. Because we can no longer rely on RCU, the change also guts
the bpf_task_acquire_not_zero() and bpf_task_kptr_get() functions
pending a resolution on the above problem.
In addition, the task fixes the kfunc and rcu_read_lock selftests to
expect this new behavior.
Fixes: 90660309b0 ("bpf: Add kfuncs for storing struct task_struct * as a kptr")
Fixes: fca1aa7551 ("bpf: Handle MEM_RCU type properly")
Reported-by: Matus Jokay <matus.jokay@stuba.sk>
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221206210538.597606-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When installing the selftests using
"make -C tools/testing/selftests install", we need to make sure
all the required files to run the selftests are installed. Let's
make sure this is the case.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221205131618.1524337-2-daan.j.demeyer@gmail.com
Parse USDT arguments like "8@(%rsp)" on x86. These are emmited by
SystemTap. The argument syntax is similar to the existing "memory
dereference case" but the offset left out as it's zero (i.e. read
the value from the address in the register). We treat it the same
as the the "memory dereference case", but set the offset to 0.
I've tested that this fixes the "unrecognized arg #N spec: 8@(%rsp).."
error I've run into when attaching to a probe with such an argument.
Attaching and reading the correct argument values works.
Something similar might be needed for the other supported
architectures.
[0] Closes: https://github.com/libbpf/libbpf/issues/559
Signed-off-by: Timo Hunziker <timo.hunziker@gmx.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221203123746.2160-1-timo.hunziker@eclipso.ch
It is useful to use vmlinux.h in the xfrm_info test like other kfunc
tests do. In particular, it is common for kfunc bpf prog that requires
to use other core kernel structures in vmlinux.h
Although vmlinux.h is preferred, it needs a ___local flavor of
struct bpf_xfrm_info in order to build the bpf selftests
when CONFIG_XFRM_INTERFACE=[m|n].
Cc: Eyal Birger <eyal.birger@gmail.com>
Fixes: 90a3a05eb3 ("selftests/bpf: add xfrm_info tests")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221206193554.1059757-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
strdup() allocates memory for path. We need to release the memory in the
following error path. Add free() to avoid memory leak.
Fixes: 8f184732b6 ("bpftool: Switch to libbpf's hashmap for pinned paths of BPF objects")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221206071906.806384-1-linmq006@gmail.com
* for-next/selftests:
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
kselftest/arm64: Set test names prior to starting children
kselftest/arm64: Use preferred form for predicate load/stores
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: Print ASCII version of unknown signal frame magic values
kselftest/arm64: Remove validation of extra_context from TODO
kselftest/arm64: Provide progress messages when signalling children
kselftest/arm64: Check that all children are producing output in fp-stress
A previous change amended try_to_freeze_tasks() with the "what"
variable pointing to a string describing the group of tasks subject to
the freezing which may be used in the error message in there too, so
make that happen.
Accordingly, update sleepgraph.py to catch the modified error message
as appropriate.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOOO08ACgkQJNaLcl1U
h9BiIAf+O8zqcxtokSTS3wsoFHDp2zprTTUk3RZbxaYMFTmFrALbQVUx5EdJ179X
Dr9rL9T2iNBN7YGhDvmzoVvLrDncJEerMk7cgbc88a5tkB7ZipI7E9QliZt92QaP
ihrXAyD7ekLC6QLXrHFNmzwUeFspgtsBkT3MakcfcucuMN53UQbFwD1r0ziCJOMZ
gFnkZKBemUDsURxWR+LCveB/WYKNrZ6Bjokdg8HY1yenACMiXaoWedmIFJ2SxId3
NNS8vqUDUSEFhDaeJVBo1Ow9m8fe+dZBUeVk9Ej7bGEXxYptwtu3aODXknySa8Eb
YVlalR9qQPvaI1688WRleRWp+oyL4Q==
=x1AC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.2
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
Test the xfrm_info kfunc helpers.
The test setup creates three name spaces - NS0, NS1, NS2.
XFRM tunnels are setup between NS0 and the two other NSs.
The kfunc helpers are used to steer traffic from NS0 to the other
NSs based on a userspace populated bpf global variable and validate
that the return traffic had arrived from the desired NS.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20221203084659.1837829-5-eyal.birger@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The typical environment where cxl_test is run, QEMU, does not support
cpu_cache_invalidate_memregion(). Add the 'test' bypass symbols to the
configuration check.
Reported-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167026948179.3527561.4535373655515827457.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pick up support for "XOR" interleave math when parsing ACPI CFMWS window
structures. Fix up conflicts with the RCH emulation already pending in
cxl/next.
In an RCH topology a CXL host-bridge as Root Complex Integrated Endpoint
the represents the memory expander. Unlike a VH topology there is no
CXL/PCIE Root Port that host the endpoint. The CXL subsystem maps this
as the CXL root object (ACPI0017 on ACPI based systems) targeting the
host-bridge as a dport, per usual, but then that dport directly hosts
the endpoint port.
Mock up that configuration with a 4th host-bridge that has a 'cxl_rcd'
device instance as its immediate child.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/166993046170.1882361.12460762475782283638.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This cpupower update for Linux 6.2-rc1 consists of:
- enhancement to choose base_cpu to display default cpupower details
instead of picking cpu 0 and failing show information when it is
offline. This change ensure user will see power information on
the cpu the tool runs on.
- adds Georgian translation to cpupower documentation.
- introduces powercap intel-rapl library, powercap-info command, and
rapl monitor. This adds the ability to show the used power consumption
in for each rapl domain
-----BEGIN PGP SIGNATURE-----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=43fr
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 6.2-rc1 from Shuah Khan:
"This cpupower update for Linux 6.2-rc1 consists of:
- enhancement to choose base_cpu to display default cpupower details
instead of picking cpu 0 and failing show information when it is
offline. This change ensure user will see power information on
the cpu the tool runs on.
- adds Georgian translation to cpupower documentation.
- introduces powercap intel-rapl library, powercap-info command, and
rapl monitor. This adds the ability to show the used power consumption
in for each rapl domain"
* tag 'linux-cpupower-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
tools/cpupower: Choose base_cpu to display default cpupower details
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/access-tracking:
: .
: Small series to add support for arm64 to access_tracking_perf_test and
: correct a couple bugs along the way.
:
: Patches courtesy of Oliver Upton.
: .
KVM: selftests: Build access_tracking_perf_test for arm64
KVM: selftests: Have perf_test_util signal when to stop vCPUs
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/s2-faults:
: .
: New KVM/arm64 selftests exercising various sorts of S2 faults, courtesy
: of Ricardo Koller. From the cover letter:
:
: "This series adds a new aarch64 selftest for testing stage 2 fault handling
: for various combinations of guest accesses (e.g., write, S1PTW), backing
: sources (e.g., anon), and types of faults (e.g., read on hugetlbfs with a
: hole, write on a readonly memslot). Each test tries a different combination
: and then checks that the access results in the right behavior (e.g., uffd
: faults with the right address and write/read flag). [...]"
: .
KVM: selftests: aarch64: Add mix of tests into page_fault_test
KVM: selftests: aarch64: Add readonly memslot tests into page_fault_test
KVM: selftests: aarch64: Add dirty logging tests into page_fault_test
KVM: selftests: aarch64: Add userfaultfd tests into page_fault_test
KVM: selftests: aarch64: Add aarch64/page_fault_test
KVM: selftests: Use the right memslot for code, page-tables, and data allocations
KVM: selftests: Fix alignment in virt_arch_pgd_alloc() and vm_vaddr_alloc()
KVM: selftests: Add vm->memslots[] and enum kvm_mem_region_type
KVM: selftests: Stash backing_src_type in struct userspace_mem_region
tools: Copy bitfield.h from the kernel sources
KVM: selftests: aarch64: Construct DEFAULT_MAIR_EL1 using sysreg.h macros
KVM: selftests: Add missing close and munmap in __vm_mem_region_delete()
KVM: selftests: aarch64: Add virt_get_pte_hva() library function
KVM: selftests: Add a userfaultfd library
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/linked-bps:
: .
: Additional selftests for the arm64 breakpoints/watchpoints,
: courtesy of Reiji Watanabe. From the cover letter:
:
: "This series adds test cases for linked {break,watch}points to the
: debug-exceptions test, and expands {break,watch}point tests to
: use non-zero {break,watch}points (the current test always uses
: {break,watch}point#0)."
: .
KVM: arm64: selftests: Test with every breakpoint/watchpoint
KVM: arm64: selftests: Add a test case for a linked watchpoint
KVM: arm64: selftests: Add a test case for a linked breakpoint
KVM: arm64: selftests: Change debug_version() to take ID_AA64DFR0_EL1
KVM: arm64: selftests: Stop unnecessary test stage tracking of debug-exceptions
KVM: arm64: selftests: Add helpers to enable debug exceptions
KVM: arm64: selftests: Remove the hard-coded {b,w}pn#0 from debug-exceptions
KVM: arm64: selftests: Add write_dbg{b,w}{c,v}r helpers in debug-exceptions
KVM: arm64: selftests: Use FIELD_GET() to extract ID register fields
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/memslot-fixes:
: .
: KVM memslot selftest fixes for non-4kB page sizes, courtesy
: of Gavin Shan. From the cover letter:
:
: "kvm/selftests/memslots_perf_test doesn't work with 64KB-page-size-host
: and 4KB-page-size-guest on aarch64. In the implementation, the host and
: guest page size have been hardcoded to 4KB. It's ovbiously not working
: on aarch64 which supports 4KB, 16KB, 64KB individually on host and guest.
:
: This series tries to fix it. After the series is applied, the test runs
: successfully with 64KB-page-size-host and 4KB-page-size-guest."
: .
KVM: selftests: memslot_perf_test: Report optimal memory slots
KVM: selftests: memslot_perf_test: Consolidate memory
KVM: selftests: memslot_perf_test: Support variable guest page size
KVM: selftests: memslot_perf_test: Probe memory slots for once
KVM: selftests: memslot_perf_test: Consolidate loop conditions in prepare_vm()
KVM: selftests: memslot_perf_test: Use data->nslots in prepare_vm()
Signed-off-by: Marc Zyngier <maz@kernel.org>
This reverts commit c4b41b83c2.
As Ian said, the "cpu-count" is not appropriate for uncore events, also it
caused a perf test failure.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221130193613.1046804-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using "sort -nu", arm64 syscalls were lost. That is, the io_setup
syscall (number 0) and all but one (typically ftruncate; 64) of the
syscalls that are defined symbolically (like "#define __NR_ftruncate
__NR3264_ftruncate") at the point where "sort" is applied.
This creation-of-syscalls.c-scheme is, judging from comments,
copy-pasted from powerpc, and worked there because at the time, its
tools/arch/powerpc/include/uapi/asm/unistd.h had *literals*, like
"#define __NR_ftruncate 93".
With sort being numeric and the non-numeric key effectively evaluating
to 0, the sort option "-u" means these "duplicates" are removed.
There's no need to remove syscall lines with duplicate numbers for arm64
because there are none, so let's fix that by just losing the "-u".
Having the table numerically sorted on syscall-number for the rest of
the syscalls looks nice, so keep the "-n".
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20201228023941.E0DE2203B5@pchp3.se.axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 93315e46b0 ("perf/core: Add speculation info to branch
entries") added a new field in between type and new_type. Perf has its
own copy of this struct so update it to match the kernel side.
This doesn't currently cause any issues because new_type is only used by
the Arm BRBE driver which isn't merged yet.
Committer notes:
Is this really an ABI? How are we supposed to deal with old perf.data
files with new tools and vice versa? :-\
Fixes: 93315e46b0 ("perf/core: Add speculation info to branch entries")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20221130165158.517385-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without
affecting users that don't want atomic operations.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: alexandru elisei <alexandru.elisei@arm.com>
Cc: kvm@vger.kernel.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: kvmarm@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20221119013450.2643007-6-seanjc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c90 ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Both tolower and toupper are built in c functions, we should not
redefine them as this can result in a build error.
Fixes the following errors:
progs/bpf_iter_ksym.c:10:20: error: conflicting types for built-in function 'tolower'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
10 | static inline char tolower(char c)
| ^~~~~~~
progs/bpf_iter_ksym.c:5:1: note: 'tolower' is declared in header '<ctype.h>'
4 | #include <bpf/bpf_helpers.h>
+++ |+#include <ctype.h>
5 |
progs/bpf_iter_ksym.c:17:20: error: conflicting types for built-in function 'toupper'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
17 | static inline char toupper(char c)
| ^~~~~~~
progs/bpf_iter_ksym.c:17:20: note: 'toupper' is declared in header '<ctype.h>'
See background on this sort of issue:
https://stackoverflow.com/a/20582607https://gcc.gnu.org/bugzilla/show_bug.cgi?id=12213
(C99, 7.1.3p1) "All identifiers with external linkage in any of the
following subclauses (including the future library directions) are
always reserved for use as identifiers with external linkage."
This is documented behavior in GCC:
https://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html#index-std-2
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221203010847.2191265-1-james.hilliard1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add three tests for cgrp local storage support for sleepable progs.
Two tests can load and run properly, one for cgroup_iter, another
for passing current->cgroups->dfl_cgrp to bpf_cgrp_storage_get()
helper. One test has bpf_rcu_read_lock() and failed to load.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221201050449.2785613-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin mentioned that the verifier cannot assume arguments from
LSM hook sk_alloc_security being trusted since after the hook
is called, the sk ref_count is set to 1. This will overwrite
the ref_count changed by the bpf program and may cause ref_count
underflow later on.
I then further checked some other hooks. For example,
for bpf_lsm_file_alloc() hook in fs/file_table.c,
f->f_cred = get_cred(cred);
error = security_file_alloc(f);
if (unlikely(error)) {
file_free_rcu(&f->f_rcuhead);
return ERR_PTR(error);
}
atomic_long_set(&f->f_count, 1);
The input parameter 'f' to security_file_alloc() cannot be trusted
as well.
Specifically, I investiaged bpf_map/bpf_prog/file/sk/task alloc/free
lsm hooks. Except bpf_map_alloc and task_alloc, arguments for all other
hooks should not be considered as trusted. This may not be a complete
list, but it covers common usage for sk and task.
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203204954.2043348-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add MEM_RCU pointer null checking for related tests. Also
modified task_acquire test so it takes a rcu ptr 'ptr' where
'ptr = rcu_ptr->rcu_field'.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203184607.478314-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Expand the cxl_test topology to include CFMWS's that use XOR math
for interleave arithmetic, as defined in the CXL Specification 3.0.
With this expanded topology, cxl_test is useful for testing:
x1,x2,x4 ways with XOR interleave arithmetic.
Define the additional XOR CFMWS entries to appear only with the
module parameter interleave_arithmetic=1. The cxl_test default
continues to be modulo math.
modprobe cxl_test interleave_arithmetic=1
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/54670400cd48ba7fcc6d8ee0d6ae2276d3f51aad.1669847017.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A downstream port must be connected to a component register block.
For restricted hosts the base address is determined from the RCRB. The
RCRB is provided by the host's CEDT CHBS entry. Rework CEDT parser to
get the RCRB and add code to extract the component register block from
it.
RCRB's BAR[0..1] point to the component block containing CXL subsystem
component registers. MEMBAR extraction follows the PCI base spec here,
esp. 64 bit extraction and memory range alignment (6.0, 7.5.1.2.1). The
RCRB base address is cached in the cxl_dport per-host bridge so that the
upstream port component registers can be retrieved later by an RCD
(RCIEP) associated with the host bridge.
Note: Right now the component register block is used for HDM decoder
capability only which is optional for RCDs. If unsupported by the RCD,
the HDM init will fail. It is future work to bypass it in this case.
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/Y4dsGZ24aJlxSfI1@rric.localdomain
[djbw: introduce devm_cxl_add_rch_dport()]
Link: https://lore.kernel.org/r/166993044524.1882361.2539922887413208807.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Accept any cxl_test topology device as the first argument in
cxl_chbs_context.
This is in preparation for reworking the detection of the component
registers across VH and RCH topologies. Move
mock_acpi_table_parse_cedt() beneath the definition of is_mock_port()
and use is_mock_port() instead of the explicit mock cxl_acpi device
check.
Acked-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993043433.1882361.17651413716599606118.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The three objects 'struct cxl_nvdimm_bridge', 'struct cxl_nvdimm', and
'struct cxl_pmem_region' manage CXL persistent memory resources. The
bridge represents base platform resources, the nvdimm represents one or
more endpoints, and the region is a collection of nvdimms that
contribute to an assembled address range.
Their relationship is such that a region is torn down if any component
endpoints are removed. All regions and endpoints are torn down if the
foundational bridge device goes down.
A workqueue was deployed to manage these interdependencies, but it is
difficult to reason about, and fragile. A recent attempt to take the CXL
root device lock in the cxl_mem driver was reported by lockdep as
colliding with the flush_work() in the cxl_pmem flows.
Instead of the workqueue, arrange for all pmem/nvdimm devices to be torn
down immediately and hierarchically. A similar change is made to both
the 'cxl_nvdimm' and 'cxl_pmem_region' objects. For bisect-ability both
changes are made in the same patch which unfortunately makes the patch
bigger than desired.
Arrange for cxl_memdev and cxl_region to register a cxl_nvdimm and
cxl_pmem_region as a devres release action of the bridge device.
Additionally, include a devres release action of the cxl_memdev or
cxl_region device that triggers the bridge's release action if an endpoint
exits before the bridge. I.e. this allows either unplugging the bridge,
or unplugging and endpoint to result in the same cleanup actions.
To keep the patch smaller the cleanup of the now defunct workqueue
infrastructure is saved for a follow-on patch.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993041773.1882361.16444301376147207609.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When testing in kci_test_ipsec_offload, srcip is configured as $dstip,
it should add xfrm policy rule in instead of out.
The test result of this patch is as follows:
PASS: ipsec_offload
Fixes: 2766a11161 ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d2825fa936 ("crypto: sm3,sm4 - move into crypto directory") moves
SM3 and SM4 algorithm implementations from stand-alone library to crypto
API. The corresponding configuration options for the API version (generic)
are CONFIG_CRYPTO_SM3_GENERIC and CONFIG_CRYPTO_SM4_GENERIC, respectively.
Replace option selected in selftests configuration from the library version
to the API version.
Fixes: d2825fa936 ("crypto: sm3,sm4 - move into crypto directory")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221201131852.38501-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current libbpf Makefile does not contain the help command, which
is inconvenient to use. Similar to the Makefile help command of the
perf, a help command is provided to list the commands supported by
libbpf make and the functions of the commands.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221202081738.128513-1-liuxin350@huawei.com
The bpf_legacy.h header uses llvm specific load functions, add
GCC compatible variants as well to fix tests using these functions
under GCC.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221201190939.3230513-1-james.hilliard1@gmail.com
address post-6.0 issues, which is hopefully a sign that things are
converging.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY4pQpQAKCRDdBJ7gKXxA
jquxAP9Lqif7CGDgdq8uWY2hHS/Ujc3k7Ohgyzs37olnCuU8KwEA6/J7SpjsBgtY
OfzvnwxpCTh8Kfzu/oNckIHo/EEiIA8=
=o6qT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes, 11 marked cc:stable.
Only three or four of the latter address post-6.0 issues, which is
hopefully a sign that things are converging"
* tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible"
Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled
drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
mm/khugepaged: fix GUP-fast interaction by sending IPI
mm/khugepaged: take the right locks for page table retraction
mm: migrate: fix THP's mapcount on isolation
mm: introduce arch_has_hw_nonleaf_pmd_young()
mm: add dummy pmd_young() for architectures not having it
mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()
tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"
nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()
hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing
madvise: use zap_page_range_single for madvise dontneed
mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE
In the "mode_filter_without_nnp" test in seccomp_bpf, there is currently
a TODO which asks to check the capability CAP_SYS_ADMIN instead of euid.
This patch adds support to check if the calling process has the flag
CAP_SYS_ADMIN, and also if this flag has CAP_EFFECTIVE set.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220731092529.28760-1-gautammenghani201@gmail.com
There is a spelling mistake in some help text. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20221201091354.1613652-1-colin.i.king@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert {clear,set}_bit() to atomics as KVM's ucall implementation relies
on clear_bit() being atomic, they are defined in atomic.h, and the same
helpers in the kernel proper are atomic.
KVM's ucall infrastructure is the only user of clear_bit() in tools/, and
there are no true set_bit() users. tools/testing/nvdimm/ does make heavy
use of set_bit(), but that code builds into a kernel module of sorts, i.e.
pulls in all of the kernel's header and so is already getting the kernel's
atomic set_bit().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "atomic_" prefix from tools' atomic_test_and_set_bit() to
match the kernel nomenclature where test_and_set_bit() is atomic,
and __test_and_set_bit() provides the non-atomic variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop tools' non-atomic test_and_set_bit() and test_and_clear_bit() helpers
now that all users are gone. The names will be claimed in the future for
atomic versions.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without affecting
users that don't want atomic operations.
Leave the usage in ucall_free() as-is, it's the one place in tools/ that
actually wants/needs atomic behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without affecting
users that don't want atomic operations.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Message-Id: <20221119013450.2643007-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take @bit as an unsigned long instead of a signed int in clear_bit() and
set_bit() so that they match the double-underscore versions, __clear_bit()
and __set_bit(). This will allow converting users that really don't want
atomic operations to the double-underscores without introducing a
functional change, which will in turn allow making {clear,set}_bit()
atomic (as advertised).
Practically speaking, this _should_ have no functional impact. KVM's
selftests usage is either hardcoded (Hyper-V tests) or is artificially
limited (arch_timer test and dirty_log test). In KVM, dirty_log test is
the only mildly interesting case as it's use indirectly restricted to
unsigned 32-bit values, but in theory it could generate a negative value
when cast to a signed int. But in that case, taking an "unsigned long"
is actually a bug fix.
Perf's usage is more difficult to audit, but any code that is affected
by the switch is likely already broken. perf_header__{set,clear}_feat()
and perf_file_header__read() effectively use only hardcoded enums with
small, positive values, atom_new() passes an unsigned long, but its value
is capped at 128 via NR_ATOM_PER_PAGE, etc...
The only real potential for breakage is in the perf flows that take a
"cpu", but it's unlikely perf is subtly relying on a negative index into
bitmaps, e.g. "cpu" can be "-1", but only as "not valid" placeholder.
Note, tools/testing/nvdimm/ makes heavy use of set_bit(), but that code
builds into a kernel module of sorts, i.e. pulls in all of the kernel's
header and so is getting the kernel's atomic set_bit(). The NVDIMM test
usage of atomics is likely unnecessary, e.g. ndtest_dimm_register() sets
bits in a local variable, but that's neither here nor there as far as
this change is concerned.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new ucall hook, GUEST_UCALL_NONE(), to allow tests to make ucalls
without allocating a ucall struct, and use it to enable single-step
in ARM's debug-exceptions test. Like the disable single-step path, the
enabling path also needs to ensure that no exclusive access sequences are
attempted after enabling single-step, as the exclusive monitor is cleared
on ERET from the debug exception taken to EL2.
The test currently "works" because clear_bit() isn't actually an atomic
operation... yet.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
- Clean up the MSR filter docs.
- Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmOJQesSHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5IR4QAKGPbLRykY/2FohV2HDu5fDPxA2Fe9nu
5W7ZIptQu+tQtCTWKFEjcQdwYoNrLbr0hr1eGubVbIvBqJbwPQfH7G0765eOIcvy
s6Zn2N24IisIoUxdkJGOL3Tt1UR7wCFbwC+ms0i4FQvMcw+TbM0BTHgJDdwR5laX
mGN7ubz5iImwDFFE3Bd8Qy5I+FGL9CI60l+RzK6b7J8HYi1wOBMLU9QueF/dB7gR
g+navZJAAnvN6YIkjP5j8yPBuvhDzni379ue5ATDq1ALvyyI7xlYALsxpUjCnLuo
CkbvgmfmC94Vdm7pzFgsbazUN2oIjwoimjFQHP1bf8Jmd+770R282JpnwiD/ydCV
Tl2ArwXA2zxVxNZm9g/XqPBwWBWWgWfYIQbuuxc065MnXCnHkY5UGGf0JNx41CDl
hdtm9DHkft8+6kyBBmgkdKxd328Znljq02v3nLePUipfpDVaNj4VAUj9IpV6Lpuj
GJjs4Wx7oqFwH1Im/LqZgnOGwgkSj3ObHtkYx2RSrQAQultbjuplFz2qZWP8PF6A
FrJbcddKOmLINrdNOlvTd5WKCAjtV8vycjFkk+/7H67rpZdM8AI1StrzMP6gmwg4
ARozZJ2UF8nTriRYFQbFQyNm9bBTZ7YQ/HajqfhvCuZLi7i1EaImhC0F1xn7IU5S
6XhvQPvjRTgS
=i6OA
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.2-1' of https://github.com/kvm-x86/linux into HEAD
Misc KVM x86 fixes and cleanups for 6.2:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
- Clean up the MSR filter docs.
- Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
- Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
-----BEGIN PGP SIGNATURE-----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=Gkt4
-----END PGP SIGNATURE-----
Merge tag 'kvm-selftests-6.2-2' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes for 6.2
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
- Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
There are still references to the removed kvm_memory_region data structure
but the doc and comments should mention struct kvm_userspace_memory_region
instead, since that is what's used by the ioctl that replaced the old one
and this data structure support the same set of flags.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Message-Id: <20221202105011.185147-4-javierm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation says that the ioctl has been deprecated, but it has been
actually removed and the remaining references are just left overs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Message-Id: <20221202105011.185147-3-javierm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation says that the ioctl has been deprecated, but it has been
actually removed and the remaining references are just left overs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Message-Id: <20221202105011.185147-2-javierm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On 32bit the trigger-synthetic-eprobe.tc selftest fails with the error:
hist:syscalls:sys_exit_openat: error: Param type doesn't match synthetic event field type
Command: hist:keys=common_pid:filename=$__arg__1,ret=ret:onmatch(syscalls.sys_enter_openat).trace(synth_open,$filename,$ret)
^
This is because the synth_open synthetic event is created with:
echo "$SYNTH u64 filename; s64 ret;" > synthetic_events
Which works fine on 64 bit, as filename is a pointer and the return is
also a long. But for 32 bit architectures, it doesn't work.
Use "unsigned long" and "long" instead so that it works for both 64 bit
and 32 bit architectures.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- malloc() does not zero the buffer,
- fread() does not null-terminate it's output,
- `cat /proc/sys/kernel/core_pattern | hexdump -C` shows the file is
not inherently null-terminated
So using string operations on the buffer is risky. Explicitly add a null
character to the end to make it safer.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041948.58339-3-bgray@linux.ibm.com
No need to write inline asm for mtspr/mfspr, we have macros for this
in reg.h
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041948.58339-2-bgray@linux.ibm.com
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/powerpc`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1669862997-31335-1-git-send-email-yangtiezhu@loongson.cn
This test adds a basic HSRv0 network with 3 nodes. In its current shape
it sends and forwards packets, announcements and so merges nodes based
on MAC A/B information.
It is able to detect duplicate packets and packetloss should any occur.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds test coverage for listening sockets created by the
in-kernel path manager in mptcp_join.sh.
It adds the listener event checking in the existing "remove single
address with port" test. The output looks like this:
003 remove single address with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
rm [ ok ] - rmsf [ ok ] invert
CREATE_LISTENER 10.0.2.1:10100[ ok ]
CLOSE_LISTENER 10.0.2.1:10100 [ ok ]
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves evts_ns1 and evts_ns2 out of do_transfer() as two global
variables in mptcp_join.sh. Init them in init() and remove them in
cleanup().
Add a new helper reset_with_events() to save the outputs of 'pm_nl_ctl
events' command in them. And a new helper kill_events_pids() to kill
pids of 'pm_nl_ctl events' command. Use these helpers in userspace pm
tests.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds test coverage for listening sockets created by userspace
processes.
It adds a new test named test_listener() and a new verifying helper
verify_listener_events(). The new output looks like this:
CREATE_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK]
DESTROY_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK]
MP_PRIO TX [OK]
MP_PRIO RX [OK]
CREATE_LISTENER 10.0.2.2:37106 [OK]
CLOSE_LISTENER 10.0.2.2:37106 [OK]
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch makes server_evts and client_evts global in userspace_pm.sh,
then these two variables could be used in test_announce(), test_remove()
and test_subflows(). The local variable 'evts' in these three functions
then could be dropped.
Also move local variable 'file' as a global one.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some userspace pm tests failed since pm listener events have been added.
Now MPTCP_EVENT_LISTENER_CREATED event becomes the first item in the
events list like this:
type:15,family:2,sport:10006,saddr4:0.0.0.0
type:1,token:3701282876,server_side:1,family:2,saddr4:10.0.1.1,...
And no token value in this MPTCP_EVENT_LISTENER_CREATED event.
This patch fixes this by specifying the type 1 item to search for token
values.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just to avoid classical Bash pitfall where variables are accidentally
overridden by other functions because the proper scope has not been
defined.
That's also what is done in other MPTCP selftests scripts where all non
local variables are defined at the beginning of the script and the
others are defined with the "local" keyword.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is clearer to declare these global variables at the beginning of the
file as it is done in other MPTCP selftests rather than in functions in
the middle of the script.
So for uniformity reason, we can do the same here in mptcp_sockopt.sh.
Suggested-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The definition of 'rndh' was probably copied from one script to another
but some times, 'sec' was not defined, not used and/or not spelled
properly.
Here all the 'rndh' are now defined the same way.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some variables were set but never used.
This was not causing any issues except adding some confusion and having
shellcheck complaining about them.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new "sandbox" net namespace is available where no other netfilter
rules have been added.
Use this new netns instead of re-using "ns1" and clean it.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify list_push_pop_multiple to alloc and insert nodes 2-at-a-time.
Without the previous patch's fix, this block of code:
bpf_spin_lock(lock);
bpf_list_push_front(head, &f[i]->node);
bpf_list_push_front(head, &f[i + 1]->node);
bpf_spin_unlock(lock);
would fail check_reference_leak check as release_on_unlock logic would miss
a ref that should've been released.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221201183406.1203621-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define and use kvm_static_assert() in the common KVM selftests headers to
provide deterministic behavior, and to allow creating static asserts
without dummy messages.
The kernel's static_assert() makes the message param optional, and on the
surface, tools/include/linux/build_bug.h appears to follow suit. However,
glibc may override static_assert() and redefine it as a direct alias of
_Static_assert(), which makes the message parameter mandatory. This leads
to non-deterministic behavior as KVM selftests code that utilizes
static_assert() without a custom message may or not compile depending on
the order of includes. E.g. recently added asserts in
x86_64/processor.h fail on some systems with errors like
In file included from lib/memstress.c:11:0:
include/x86_64/processor.h: In function ‘this_cpu_has_p’:
include/x86_64/processor.h:193:34: error: expected ‘,’ before ‘)’ token
static_assert(low_bit < high_bit); \
^
due to _Static_assert() expecting a comma before a message. The "message
optional" version of static_assert() uses macro magic to strip away the
comma when presented with empty an __VA_ARGS__
#ifndef static_assert
#define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
#define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
#endif // static_assert
and effectively generates "_Static_assert(expr, #expr)".
The incompatible version of static_assert() gets defined by this snippet
in /usr/include/assert.h:
#if defined __USE_ISOC11 && !defined __cplusplus
# undef static_assert
# define static_assert _Static_assert
#endif
which yields "_Static_assert(expr)" and thus fails as above.
KVM selftests don't actually care about using C11, but __USE_ISOC11 gets
defined because of _GNU_SOURCE, which many tests do #define. _GNU_SOURCE
triggers a massive pile of defines in /usr/include/features.h, including
_ISOC11_SOURCE:
/* If _GNU_SOURCE was defined by the user, turn on all the other features. */
#ifdef _GNU_SOURCE
# undef _ISOC95_SOURCE
# define _ISOC95_SOURCE 1
# undef _ISOC99_SOURCE
# define _ISOC99_SOURCE 1
# undef _ISOC11_SOURCE
# define _ISOC11_SOURCE 1
# undef _POSIX_SOURCE
# define _POSIX_SOURCE 1
# undef _POSIX_C_SOURCE
# define _POSIX_C_SOURCE 200809L
# undef _XOPEN_SOURCE
# define _XOPEN_SOURCE 700
# undef _XOPEN_SOURCE_EXTENDED
# define _XOPEN_SOURCE_EXTENDED 1
# undef _LARGEFILE64_SOURCE
# define _LARGEFILE64_SOURCE 1
# undef _DEFAULT_SOURCE
# define _DEFAULT_SOURCE 1
# undef _ATFILE_SOURCE
# define _ATFILE_SOURCE 1
#endif
which further down in /usr/include/features.h leads to:
/* This is to enable the ISO C11 extension. */
#if (defined _ISOC11_SOURCE \
|| (defined __STDC_VERSION__ && __STDC_VERSION__ >= 201112L))
# define __USE_ISOC11 1
#endif
To make matters worse, /usr/include/assert.h doesn't guard against
multiple inclusion by turning itself into a nop, but instead #undefs a
few macros and continues on. As a result, it's all but impossible to
ensure the "message optional" version of static_assert() will actually be
used, e.g. explicitly including assert.h and #undef'ing static_assert()
doesn't work as a later inclusion of assert.h will again redefine its
version.
#ifdef _ASSERT_H
# undef _ASSERT_H
# undef assert
# undef __ASSERT_VOID_CAST
# ifdef __USE_GNU
# undef assert_perror
# endif
#endif /* assert.h */
#define _ASSERT_H 1
#include <features.h>
Fixes: fcba483e82 ("KVM: selftests: Sanity check input to ioctls() at build time")
Fixes: ee37955366 ("KVM: selftests: Refactor X86_FEATURE_* framework to prep for X86_PROPERTY_*")
Fixes: 53a7dc0f21 ("KVM: selftests: Add X86_PROPERTY_* framework to retrieve CPUID values")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221122013309.1872347-1-seanjc@google.com
Move the AMX test's kvm_cpu_has() checks before creating the VM+vCPU,
there are no dependencies between the two operations. Opportunistically
add a comment to call out that enabling off-by-default XSAVE-managed
features must be done before KVM_GET_SUPPORTED_CPUID is cached.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-5-seanjc@google.com
Disallow using kvm_get_supported_cpuid() and thus caching KVM's supported
CPUID info before enabling XSAVE-managed features that are off-by-default
and must be enabled by ARCH_REQ_XCOMP_GUEST_PERM. Caching the supported
CPUID before all XSAVE features are enabled can result in false negatives
due to testing features that were cached before they were enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-4-seanjc@google.com
Move __vm_xsave_require_permission() below the CPUID helpers so that a
future change can reference the cached result of KVM_GET_SUPPORTED_CPUID
while keeping the definition of the variable close to its intended user,
kvm_get_supported_cpuid().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-3-seanjc@google.com
Move the kvm_cpu_has() check on X86_FEATURE_XFD out of the helper to
enable off-by-default XSAVE-managed features and into the one test that
currenty requires XFD (XFeature Disable) support. kvm_cpu_has() uses
kvm_get_supported_cpuid() and thus caches KVM_GET_SUPPORTED_CPUID, and so
using kvm_cpu_has() before ARCH_REQ_XCOMP_GUEST_PERM effectively results
in the test caching stale values, e.g. subsequent checks on AMX_TILE will
get false negatives.
Although off-by-default features are nonsensical without XFD, checking
for XFD virtualization prior to enabling such features isn't strictly
required.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Fixes: 7fbb653e01 ("KVM: selftests: Check KVM's supported CPUID, not host CPUID, for XFD")
Link: https://lore.kernel.org/r/20221125023839.315207-1-lei4.wang@intel.com
[sean: add Fixes, reword changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128225735.3291648-2-seanjc@google.com
Restore the assert (on x86-64) that <10% of pages are still idle when NOT
running as a nested VM in the access tracking test. The original assert
was converted to a "warning" to avoid false failures when running the
test in a VM, but the non-nested case does not suffer from the same
"infinite TLB size" issue.
Using the HYPERVISOR flag isn't infallible as VMMs aren't strictly
required to enumerate the "feature" in CPUID, but practically speaking
anyone that is running KVM selftests in VMs is going to be using a VMM
and hypervisor that sets the HYPERVISOR flag.
Cc: David Matlack <dmatlack@google.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221129175300.4052283-3-seanjc@google.com
Warn if the number of idle pages is greater than or equal to 10% of the
total number of pages, not if the percentage of idle pages is less than
10%. The original code asserted that less than 10% of pages were still
idle, but the check got inverted when the assert was converted to a
warning.
Opportunistically clean up the warning; selftests are 64-bit only, there
is no need to use "%PRIu64" instead of "%lu".
Fixes: 6336a810db ("KVM: selftests: replace assertion with warning in access_tracking_perf_test")
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221129175300.4052283-2-seanjc@google.com
nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.
The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The mock cxl mem devs needs a way to go into "locked" status to simulate
when the platform is rebooted. Add a sysfs mechanism so the device security
state is set to "locked" and the frozen state bits are cleared.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983617602.2734609.7042497620931694717.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support to emulate a CXL mem device support the "Disable Passphrase"
operation. The operation supports disabling of either a user or a master
passphrase. The emulation will provide support for both user and master
passphrase.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983612447.2734609.2767804273351656413.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support to emulate a CXL mem device supporting the "Set Passphrase"
operation. The operation supports setting of either a user or a master
passphrase.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983611314.2734609.12996309794483934484.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add the emulation support for handling "Get Security State" opcode for a
CXL memory device for the cxl_test. The function will copy back device
security state bitmask to the output payload.
The security state data is added as platform_data for the mock mem device.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983610177.2734609.4953959949148428755.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that we can skip unsupported configurations add some more test cases
using that, cover 8kHz, 44.1kHz and 96kHz plus 8kHz mono and 48kHz 6
channel.
44.1kHz is a different clock base to the existing 48kHz tests and may
therefore show problems with the clock configuration if only 8kHz based
rates are really available (or help diagnose if bad clocking is due to
only 44.1kHz based rates being supported). 8kHz mono and 48Hz 6 channel
are real world formats and should show if clocking does not account for
channel count properly.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-7-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rather than just numbering the tests try to provide semi descriptive names
for what the tests are trying to cover. This also has the advantage of
meaning we can add more tests without having to keep the list of tests
ordered by existing number which should make it easier to understand what
we're testing and why.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-6-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The values in the one example configuration file we currently have are the
default values for the two tests we have so there's no need to actually set
them. Comment them out as examples, with a rename for the tests so that we
can update the tests in the code more easily.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-5-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If constraint selection gives us a number of channels other than the one
that we asked for that isn't a failure, that is the device implementing
constraints and advertising that it can't support whatever we asked
for. Report such cases as a test skip rather than failure so we don't have
false positives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-4-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If constraint selection gives us a sample rate other than the one that we
asked for that isn't a failure, that is the device implementing sample
rate constraints and advertising that it can't support whatever we asked
for. Report such cases as a test skip rather than failure so we don't have
false positives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to help make the list of tests a bit easier to maintain refactor
things so we pass the tests around as a struct with the parameters in,
enabling us to add new tests by adding to a table with comments saying
what each of the number are. We could also use named initializers if we get
more parameters.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When everything is starting up we are likely to have a lot of child
processes producing output at once. This means that we can reduce
overhead a bit by allowing epoll_wait() to return more than one
descriptor at once, it cuts down on the number of system calls we need
to do which on virtual platforms where the syscall overhead is a bit
more noticable and we're likely to have a lot more children active can
make a small but noticable difference.
On physical platforms the relatively small number of processes being run
and vastly improved speeds push the effects of this change into the
noise.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now we hold execution of the stress test programs until all children are
started there is no need to drain output while that is happening.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
At present fp-stress has a bit of a thundering herd problem since the
children it spawns start running immediately, meaning that they can start
starving the parent process of CPU before it has even started all the
children. This is much more severe on virtual platforms since they tend to
support far more SVE and SME vector lengths, be slower in general and for
some have issues with performance when simulating multiple CPUs.
We can mitigate this problem by having all the child processes block before
starting the test program, meaning that we at least have all the child
processes started before we start heavily using CPU. We still have the same
load issues while waiting for the actual stress test programs to start up
and produce output but they're at least all ready to go before that kicks
in, resulting in substantial reductions in overall runtime on some of the
severely affected systems. One test was showing about 20% improvement.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The test prog dumps a single AF_UNIX socket's UID with and without
unshare(CLONE_NEWUSER) and checks if it matches the result of getuid().
Without the preceding patch, the test prog is killed by a NULL deref
in sk_diag_dump_uid().
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
BUG: kernel NULL pointer dereference, address: 0000000000000270
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170)
...
# 1: Test terminated unexpectedly by signal 9
# FAIL diag_uid.uid.1
not ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# 1: Test terminated by timeout
# FAIL diag_uid.uid_unshare.1
not ok 2 diag_uid.uid_unshare.1
# FAILED: 0 / 2 tests passed.
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
With the patch, the test succeeds.
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
# OK diag_uid.uid.1
ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# OK diag_uid.uid_unshare.1
ok 2 diag_uid.uid_unshare.1
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add nvdimm_security_ops support for CXL memory device with the introduction
of the ->get_flags() callback function. This is part of the "Persistent
Memory Data-at-rest Security" command set for CXL memory device support.
The ->get_flags() function provides the security state of the persistent
memory device defined by the CXL 3.0 spec section 8.2.9.8.6.1.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983609611.2734609.13231854299523325319.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Verify the KVM allows userspace to set all supported bits in the
IA32_FEATURE_CONTROL MSR irrespective of the current guest CPUID, and
that all unsupported bits are rejected.
Throw the testcase into vmx_msrs_test even though it's not technically a
VMX MSR; it's close enough, and the most frequently feature controlled by
the MSR is VMX.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220607232353.3375324-4-seanjc@google.com
Cover the essential functionality of the iommufd with a directed test from
userspace. This aims to achieve reasonable functional coverage using the
in-kernel self test framework.
A second test does a failure injection sweep of the success paths to study
error unwind behaviors.
This allows achieving high coverage of the corner cases in pages.c.
The selftest requires CONFIG_IOMMUFD_TEST to be enabled, and several huge
pages which may require:
echo 4 > /proc/sys/vm/nr_hugepages
Link: https://lore.kernel.org/r/19-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com> # aarch64
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This test was overlooked with a hard-coded mntpoint path in test when
we're removing the hugetlb mntpoint in commit 0796c7b8be. Fix it up so
the test can keep running.
Link: https://lkml.kernel.org/r/Y3aojfUC2nSwbCzB@x1n
Fixes: 0796c7b8be ("selftests/vm: drop mnt point for hugetlb in run_vmtests.sh")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's test whether R/O long-term pinning is reliable for non-anonymous
memory: when R/O long-term pinning a page, the expectation is that we
break COW early before pinning, such that actual write access via the
page tables won't break COW later and end up replacing the R/O-pinned
page in the page table.
Consequently, R/O long-term pinning in private mappings would only target
exclusive anonymous pages.
For now, all tests fail:
# [RUN] R/O longterm GUP pin ... with shared zeropage
not ok 151 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd
not ok 152 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with tmpfile
not ok 153 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with huge zeropage
not ok 154 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (2048 kB)
not ok 155 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (1048576 kB)
not ok 156 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with shared zeropage
not ok 157 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd
not ok 158 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with tmpfile
not ok 159 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with huge zeropage
not ok 160 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (2048 kB)
not ok 161 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (1048576 kB)
not ok 162 Longterm R/O pin is reliable
Link: https://lkml.kernel.org/r/20221116102659.70287-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's add basic tests for COW with non-anonymous pages in private
mappings: write access should properly trigger COW and result in the
private changes not being visible through other page mappings.
Especially, add tests for:
* Zeropage
* Huge zeropage
* Ordinary pagecache pages via memfd and tmpfile()
* Hugetlb pages via memfd
Fortunately, all tests pass.
Link: https://lkml.kernel.org/r/20221116102659.70287-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/gup: remove FOLL_FORCE usage from drivers (reliable R/O
long-term pinning)".
For now, we did not support reliable R/O long-term pinning in COW
mappings. That means, if we would trigger R/O long-term pinning in
MAP_PRIVATE mapping, we could end up pinning the (R/O-mapped) shared
zeropage or a pagecache page.
The next write access would trigger a write fault and replace the pinned
page by an exclusive anonymous page in the process page table; whatever
the process would write to that private page copy would not be visible by
the owner of the previous page pin: for example, RDMA could read stale
data. The end result is essentially an unexpected and hard-to-debug
memory corruption.
Some drivers tried working around that limitation by using
"FOLL_FORCE|FOLL_WRITE|FOLL_LONGTERM" for R/O long-term pinning for now.
FOLL_WRITE would trigger a write fault, if required, and break COW before
pinning the page. FOLL_FORCE is required because the VMA might lack write
permissions, and drivers wanted to make that working as well, just like
one would expect (no write access, but still triggering a write access to
break COW).
However, that is not a practical solution, because
(1) Drivers that don't stick to that undocumented and debatable pattern
would still run into that issue. For example, VFIO only uses
FOLL_LONGTERM for R/O long-term pinning.
(2) Using FOLL_WRITE just to work around a COW mapping + page pinning
limitation is unintuitive. FOLL_WRITE would, for example, mark the
page softdirty or trigger uffd-wp, even though, there actually isn't
going to be any write access.
(3) The purpose of FOLL_FORCE is debug access, not access without lack of
VMA permissions by arbitrarty drivers.
So instead, make R/O long-term pinning work as expected, by breaking COW
in a COW mapping early, such that we can remove any FOLL_FORCE usage from
drivers and make FOLL_FORCE ptrace-specific (renaming it to FOLL_PTRACE).
More details in patch #8.
This patch (of 19):
Originally, the plan was to have a separate tests for testing COW of
non-anonymous (e.g., shared zeropage) pages.
Turns out, that we'd need a lot of similar functionality and that there
isn't a really good reason to separate it. So let's prepare for non-anon
tests by renaming to "cow".
Link: https://lkml.kernel.org/r/20221116102659.70287-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221116102659.70287-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bernard Metzler <bmt@zurich.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nelson Escobar <neescoba@cisco.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When testing overflow and overread, there is no need to keep unnecessary
compilation warnings, we should simply ignore them.
The motivation for this patch is to eliminate the compilation warning,
maybe one day we will compile the kernel with "-Werror -Wall", at which
point this compilation warning will turn into a compilation error, we
should fix this error in advance.
How to reproduce the problem (with gcc-11.3.1):
$ make -C tools/testing/selftests/
...
warning: `write' reading 4294967295 bytes from a region of size 1
[-Wstringop-overread]
warning: `read' writing 4294967295 bytes into a region of size 25
overflows the destination [-Wstringop-overflow=]
"-Wno-stringop-overread" is supported at least in gcc-11.1.0.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=d14c547abd484d3540b692bb8048c4a6efe92c8b
Link: https://lkml.kernel.org/r/tencent_51C4ACA8CB3895C2D7F35178440283602107@qq.com
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's extend the test to cover the possible mprotect() optimization when
removing write-protection. mprotect() must not allow write-access to a
COW-shared page by accident.
Link: https://lkml.kernel.org/r/20221108174652.198904-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 8ebe0a5eaa ("mm,madvise,hugetlb: fix unexpected data loss with
MADV_DONTNEED on hugetlbfs") changed how the passed length was interpreted
for hugetlb mappings. It was changed from align up to align down. The
hugetlb-madvise test explicitly tests this behavior. Change test to
expect new behavior.
Link: https://lkml.kernel.org/r/20221104011632.357049-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/oe-lkp/202211040619.2ec447d7-oliver.sang@intel.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a simple test case for ensuring tried_regions directory existence.
Link: https://lkml.kernel.org/r/20221101220328.95765-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This CPU power monitor shows the power consumption
as exposed by the powercap subsystem, cmp with:
Documentation/power/powercap/powercap.rst
cpupower monitor -m RAPL
| RAPL
CPU| pack | core | unco
0|6853926|967832|442381
8|6853926|967832|442381
1|6853926|967832|442381
9|6853926|967832|442381
Unfortunately RAPL domains cannot be directly mapped to the corresponding
CPU socket/package, core it belongs to.
Not sure this is possible at all with the current data exposed from the
kernel.
Still it can be worthful information for developers trying to optimize
power consumption of workloads or their system in general.
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Zhang Rui <rui.zhang@intel.com>
CC: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Read out powercap zone information via:
cpupower powercap-info
and show the zone hierarchy to the user:
./cpupower powercap-info
Driver: intel-rapl
Powercap domain hierarchy:
Zone: package-0 (enabled)
Power consumption can be monitored in micro Watts
Zone: core (disabled)
Power consumption can be monitored in micro Watts
Zone: uncore (disabled)
Power consumption can be monitored in micro Watts
Zone: dram (disabled)
Power consumption can be monitored in micro Watts
There is a dummy -a option for powercap-info which can/should be used to
show more detailed info later. Like that other args can be added easily
later as well.
A enable/disable option via powercap-set subcommand is also an enhancement
for later.
Also not all RAPL domains are shown. The func walking through RAPL
subdomains is restricted and hardcoded to: "intel-rapl/intel-rapl:0"
On my system above powercap domains map to:
intel-rapl/intel-rapl:0
-> pack (age-0)
intel-rapl/intel-rapl:0/intel-rapl:0:0
-> core
intel-rapl/intel-rapl:0/intel-rapl:0:1
-> uncore
Missing ones on my system are:
intel-rapl-mmio/intel-rapl-mmio:0
-> pack (age-0)
intel-rapl/intel-rapl:1
-> psys
This could get enhanced in:
struct powercap_zone *powercap_init_zones()
and adopted to walk through all intel-rapl zones, but
also to other powercap drivers like dtpm
(Dynamic Thermal Power Management framework),
cmp with: drivers/powercap/dtpm_*
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The networking programs typically don't require CAP_PERFMON, but through kfuncs
like bpf_cast_to_kern_ctx() they can access memory through PTR_TO_BTF_ID. In
such case enforce CAP_PERFMON.
Also make sure that only GPL programs can access kernel data structures.
All kfuncs require GPL already.
Also remove allow_ptr_to_map_access. It's the same as allow_ptr_leaks and
different name for the same check only causes confusion.
Fixes: fd264ca020 ("bpf: Add a kfunc to type cast from bpf uapi ctx to kernel ctx")
Fixes: 50c6b8a9ae ("selftests/bpf: Add a test for btf_type_tag "percpu"")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221125220617.26846-1-alexei.starovoitov@gmail.com
BPF CI fails for arm64 and s390x each with the following result:
[...]
All error logs:
serial_test_kprobe_multi_bench_attach:PASS:get_syms 0 nsec
serial_test_kprobe_multi_bench_attach:PASS:kprobe_multi_empty__open_and_load 0 nsec
libbpf: prog 'test_kprobe_empty': failed to attach: Operation not supported
serial_test_kprobe_multi_bench_attach:FAIL:bpf_program__attach_kprobe_multi_opts unexpected error: -95
#92 kprobe_multi_bench_attach:FAIL
[...]
Add the test to the deny list.
Fixes: 5b6c7e5c44 ("selftests/bpf: Add attach bench test")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add simple test cases for DAMON_LRU_SORT's 'enabled' parameter. Those
tests are focusing on the synchronous behavior of DAMON_RECLAIM enabling
and disabling.
Link: https://lkml.kernel.org/r/20221025173650.90624-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add simple test cases for DAMON_RECLAIM's 'enabled' parameter. Those
tests are focusing on the synchronous behavior of DAMON_RECLAIM enabling
and disabling.
Link: https://lkml.kernel.org/r/20221025173650.90624-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/vm`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Link: https://lkml.kernel.org/r/1668825419-30584-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.
For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g. neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.
Add minimal support for REDIRECTs. No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.
Also extend the existing test case to cover redirects.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just a simple test to make sure we don't introduce unwanted compiler
warnings and API still supports passing enums as input argument.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-2-andrii@kernel.org
C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.
More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:
enum bpf_stats_type: int;
In C (and I believe it's a GCC extension also), such forward declaration
is simply:
enum bpf_stats_type;
Further, in Linux UAPI this enum is defined in pure C way:
enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }
And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.
To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.
[0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
[1] Closes: https://github.com/libbpf/libbpf/issues/249
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
This patch removes the need to pin prog when attaching to tc ingress
in the btf_skc_cls_ingress test. Instead, directly use the
bpf_tc_hook_create() and bpf_tc_attach(). The qdisc clsact
will go away together with the netns, so no need to
bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-8-martin.lau@linux.dev
After removing the mount/umount dance from {open,close}_netns()
in the pervious patch, "serial_" can be removed from
the tests using {open,close}_netns().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-7-martin.lau@linux.dev
The previous patches have removed the need to do the mount and umount
dance when switching netns. In particular:
* Avoid remounting /sys/fs/bpf to have a clean start
* Avoid remounting /sys to get a ifindex of a particular netns
This patch can finally remove the mount and umount dance in
{open,close}_netns which is unnecessarily complicated and
error-prone.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-6-martin.lau@linux.dev
This patch removes the need to pin prog in the remaining tests in
tc_redirect.c by directly using the bpf_tc_hook_create() and
bpf_tc_attach(). The clsact qdisc will go away together with
the test netns, so no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-5-martin.lau@linux.dev
This patch removes the need to pin prog in the tc_redirect_peer_l3
test by directly using the bpf_tc_hook_create() and bpf_tc_attach().
The clsact qdisc will go away together with the test netns, so
no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-4-martin.lau@linux.dev
This patch removes the need to pin prog in the tc_redirect_dtime
test by directly using the bpf_tc_hook_create() and bpf_tc_attach().
The clsact qdisc will go away together with the test netns, so
no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-3-martin.lau@linux.dev
When switching netns, the setns_by_fd() is doing dances in mount/umounting
the /sys directories. One reason is the tc_redirect.c test is depending
on the /sys/net/class/*/ifindex instead of using the if_nametoindex().
if_nametoindex() uses ioctl() to get the ifindex.
This patch is to move all /sys/net/class/*/ifindex usages to
if_nametoindex(). The current code checks ifindex >= 0 which is
incorrect. ifindex > 0 should be checked instead. This patch also
stores ifindex_veth_src and ifindex_veth_dst since the latter patch
will need them.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-2-martin.lau@linux.dev
Torture test the cases where the runstate crosses a page boundary, and
and especially the case where it's configured in 32-bit mode and doesn't,
but then switching to 64-bit mode makes it go onto the second page.
To simplify this, make the KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST ioctl
also update the guest runstate area. It already did so if the actual
runstate changed, as a side-effect of kvm_xen_update_runstate(). So
doing it in the plain adjustment case is making it more consistent, as
well as giving us a nice way to trigger the update without actually
running the vCPU again and changing the values.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
