Commit Graph

1628 Commits

Author SHA1 Message Date
Viresh Kumar
d15ce41273 ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier
The cpufreq core now takes the min/max frequency constraints via QoS
requests and the CPUFREQ_ADJUST notifier shall get removed later on.

Switch over to using the QoS request for maximum frequency constraint
for acpi driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-28 11:21:53 +02:00
Linus Torvalds
e9a83bd232 It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro.  These create more
    than the usual number of simple but annoying merge conflicts with other
    trees, unfortunately.  He has a lot more of these waiting on the wings
    that, I think, will go to you directly later on.
 
  - A new document on how to use merges and rebases in kernel repos, and one
    on Spectre vulnerabilities.
 
  - Various improvements to the build system, including automatic markup of
    function() references because some people, for reasons I will never
    understand, were of the opinion that :c:func:``function()`` is
    unattractive and not fun to type.
 
  - We now recommend using sphinx 1.7, but still support back to 1.4.
 
  - Lots of smaller improvements, warning fixes, typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
 gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
 raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
 3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
 DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
 dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
 =D0eO
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.3' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...
2019-07-09 12:34:26 -07:00
Linus Torvalds
4b4704520d ACPI updates for 5.3-rc1
- Update the ACPICA code in the kernel to upstream revision 20190703
    including:
    * Initial/defalut namespace creation simplification (Bob Moore).
    * Object initialization sequence update (Bob Moore).
    * Removal of legacy module-level (dead) code (Erik Schmauss).
    * Table load object initialization update (Erik Schmauss, Nikolaus
      Voss).
 
  - Fix GPE enabling issue in ACPICA causing premature wakeups from
    suspend-to-idle to occur (Rafael Wysocki).
 
  - Allow ACPI AC and battery drivers to be built on non-X86 (Ard
    Biesheuvel).
 
  - Fix address space handler removal in the ACPI PMIC driver for
    Intel platforms (Andy Shevchenko).
 
  - Allow BGRT to be overridden via initrd or configfs (Andrea Oliveri).
 
  - Fix object resolution on table loads via configfs (Nikolaus Voss).
 
  - Clean up assorted pieces of ACPI code and tools (Colin Ian King,
    Liguang Zhang, Masahiro Yamada).
 
  - Fix documentation build warning, convert the extcon document to
    ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
    Qian Cai).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0jLCoSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxbV4P/18Kt/la5KUvOMVOXXIEPes5lEbhQ8m1
 BBhRcHOh9GDNXlXkogJSssKo5GlHXBBtN5ipMMFnwyi/gK2V1834nwXG3+gjuUoE
 Q9zHTBQDBybBCDDj/EjZeF+AuTMRbeW2bV80+4LgQ2oAQCK5TOG873K1U9iAYTBs
 +7KaquWcZKPEzZb6RvaH0+2T/Ihg35Hqutlyp2ly1+h8SzYDwJui4SQwsh0BPrml
 ujMveW2dbVsoOsAFJJw3ATsejBeNmaBfK6VtJnBF4eeeCQKfI0auz+OTht22+4gR
 NX+Q5/XZdFti7m60fVEc78yhNp2BPCHbR8UNnx3rKpjiVkh8yPG7B4KTgmOwpREW
 0BMzGSJIwCkoK89Abf3+NqEk77hEDVljgqLTYAIfKnFmO6SL1OH3bQERFducEp/L
 ncBQOMz8FOYAJIbNFTIHA7w/5XYtFsAk+grJMPXiZKi/hOFn4YyuR/8qDNwLq3R9
 +g1ggqCPzDrJQ7IiKJ8pwS+kJP2jlp/u7JdWzKJl8FaCtxfk2I6TGQtM/MOR5JJj
 tup2v8I8c8ROnv/0aa6jqKYHS+w84xXAjb54BdgGCaU5Oz2Ainoyp0Aa0BVIpjSu
 vx9CSF74s9aP7lY8TwAXy7njLz18VNnocQn9zksfl5hJncNCgYOv96mtgeqHsuo6
 E811ArtdcHRR
 =4FCz
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20190703, fix up the handling of GPEs in ACPICA, allow some more ACPI
  code to be built on ARM64 platforms, allow BGRT to be overridden, fix
  minor issues and clean up assorted pieces of ACPI code.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190703
     including:
       - Initial/default namespace creation simplification (Bob Moore).
       - Object initialization sequence update (Bob Moore).
       - Removal of legacy module-level (dead) code (Erik Schmauss).
       - Table load object initialization update (Erik Schmauss,
         Nikolaus Voss).

   - Fix GPE enabling issue in ACPICA causing premature wakeups from
     suspend-to-idle to occur (Rafael Wysocki).

   - Allow ACPI AC and battery drivers to be built on non-X86 (Ard
     Biesheuvel).

   - Fix address space handler removal in the ACPI PMIC driver for Intel
     platforms (Andy Shevchenko).

   - Allow BGRT to be overridden via initrd or configfs (Andrea
     Oliveri).

   - Fix object resolution on table loads via configfs (Nikolaus Voss).

   - Clean up assorted pieces of ACPI code and tools (Colin Ian King,
     Liguang Zhang, Masahiro Yamada).

   - Fix documentation build warning, convert the extcon document to
     ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
     Qian Cai)"

* tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / APEI: Remove needless __ghes_check_estatus() calls
  ACPICA: Update version to 20190703
  ACPICA: Update table load object initialization
  ACPICA: Update for object initialization sequence
  ACPICA: remove legacy module-level code due to deprecation
  ACPICA: Namespace: simplify creation of the initial/default namespace
  ACPI / PMIC: intel: Drop double removal of address space handler
  ACPI: APD: remove redundant assignment to pointer clk
  docs: extcon: convert it to ReST and move to ACPI dir
  ACPI: Make AC and battery drivers available on !X86
  ACPICA: Clear status of GPEs on first direct enable
  ACPI: configfs: Resolve objects on host-directed table loads
  ACPI: tables: Allow BGRT to be overridden
  ACPI: OSL: Make a W=1 kernel-doc warning go away
  ACPI: tools: Exclude tools/* from .gitignore patterns
2019-07-09 10:21:39 -07:00
Rafael J. Wysocki
62fd33d3f5 Merge branch 'acpica'
* acpica:
  ACPICA: Update version to 20190703
  ACPICA: Update table load object initialization
  ACPICA: Update for object initialization sequence
  ACPICA: remove legacy module-level code due to deprecation
  ACPICA: Namespace: simplify creation of the initial/default namespace
  ACPICA: Clear status of GPEs on first direct enable
2019-07-08 11:04:00 +02:00
Rafael J. Wysocki
8ca572ec3c Merge branches 'acpi-tables', 'acpi-osl', 'acpi-misc' and 'acpi-tools'
* acpi-tables:
  ACPI: configfs: Resolve objects on host-directed table loads
  ACPI: tables: Allow BGRT to be overridden

* acpi-osl:
  ACPI: OSL: Make a W=1 kernel-doc warning go away

* acpi-misc:
  ACPI: Make AC and battery drivers available on !X86

* acpi-tools:
  ACPI: tools: Exclude tools/* from .gitignore patterns
2019-07-08 11:02:22 +02:00
Rafael J. Wysocki
50e163d43a Merge branches 'acpi-pm' and 'pm-pci'
* acpi-pm:
  ACPI: PM: Make acpi_sleep_state_supported() non-static
  ACPI: PM: Allow transitions to D0 to occur in special cases
  ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
  ACPI / sleep: Switch to use acpi_dev_get_first_match_dev()
  ACPI / LPIT: Correct LPIT end address for lpit_process()

* pm-pci:
  ACPI: PM: Unexport acpi_device_get_power()
  PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
  PCI / ACPI: Add _PR0 dependent devices
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  PCI: Do not poll for PME if the device is in D3cold
  PCI: Add missing link delays required by the PCIe spec
  PCI: PM: Replace pci_dev_keep_suspended() with two functions
  PCI: PM: Avoid resuming devices in D3hot during system suspend
2019-07-08 10:49:36 +02:00
Dexuan Cui
ad5a449b70 ACPI: PM: Make acpi_sleep_state_supported() non-static
With some upcoming patches to save/restore the Hyper-V drivers related
states, a Linux VM running on Hyper-V will be able to hibernate. When
a Linux VM hibernates, unluckily we must disable the memory hot-add/remove
and balloon up/down capabilities in the hv_balloon driver
(drivers/hv/hv_balloon.c), because these can not really work according to
the design of the related back-end driver on the host.

By default, Hyper-V does not enable the virtual ACPI S4 state for a VM;
on recent Hyper-V hosts, the administrator is able to enable the virtual
ACPI S4 state for a VM, so we hope to use the presence of the virtual ACPI
S4 state as a hint for hv_balloon to disable the aforementioned
capabilities. In this way, hibernation will work more reliably, from the
user's perspective.

By marking acpi_sleep_state_supported() non-static, we'll be able to
implement a hv_is_hibernation_supported() API in the always-built-in
module arch/x86/hyperv/hv_init.c, and the API will be called by hv_balloon.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-06 09:49:22 +02:00
Rafael J. Wysocki
9ed411c06d ACPI: PM: Unexport acpi_device_get_power()
Using acpi_device_get_power() outside of ACPI device initialization
and ACPI sysfs is problematic due to the way in which power resources
are handled by it, so unexport it and add a paragraph explaining the
pitfalls to its kerneldoc comment.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-04 10:49:57 +02:00
Bob Moore
02a93f35f5 ACPICA: Update version to 20190703
ACPICA commit 450ffd8b9c100db561ecf23063620cb107d68c30

Version 20190703.

Link: https://github.com/acpica/acpica/commit/450ffd8b
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-04 00:59:44 +02:00
Mika Westerberg
4533771c1e ACPI / PM: Introduce concept of a _PR0 dependent device
If there are shared power resources between otherwise unrelated devices
turning them on causes the other devices sharing them to be powered up
as well. In case of PCI devices go into D0uninitialized state meaning
that if they were configured to trigger wake that configuration is lost
at this point.

For this reason introduce a concept of "_PR0 dependent device" that can
be added to any ACPI device that has power resources. The dependent
device will be included in a list of dependent devices for all power
resources returned by the ACPI device's _PR0 (assuming it has one).
Whenever a power resource having dependent devices is turned physically
on (its _ON method is called) we runtime resume all of them to allow
their driver or in case of PCI the PCI core to re-initialize the device
and its wake configuration.

This adds two functions that can be used to add and remove these
dependent devices. Note the dependent device does not necessary need
share power resources so this functionality can be used to add "software
dependencies" as well if needed.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-27 12:31:57 +02:00
Jonathan Corbet
8afecfb0ec Linux 5.2-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
 4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
 dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
 ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
 DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
 g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
 XCMhQ9s=
 =cb80
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc4' into mauro

We need to pick up post-rc1 changes to various document files so they don't
get lost in Mauro's massive RST conversion push.
2019-06-14 14:18:53 -06:00
Mauro Carvalho Chehab
cb1aaebea8 docs: fix broken documentation links
Mostly due to x86 and acpi conversion, several documentation
links are still pointing to the old file. Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-08 13:42:13 -06:00
Thomas Gleixner
b886d83c5b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:17 +02:00
Thomas Gleixner
55716d2643 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428
Based on 1 normalized pattern(s):

  this file is released under the gplv2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 68 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:16 +02:00
Qian Cai
9fe51603d9 ACPI: OSL: Make a W=1 kernel-doc warning go away
It appears that kernel-doc does not understand the return type *__ref,

drivers/acpi/osl.c:306: warning: cannot understand function prototype:
'void __iomem *__ref acpi_os_map_iomem(acpi_physical_address phys,
acpi_size size)

Signed-off-by: Qian Cai <cai@lca.pw>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-04 17:21:11 +02:00
Thomas Gleixner
1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Thomas Gleixner
c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Linus Torvalds
fcdec14365 More ACPI updates for 5.2-rc1
- Update the ACPICA code in the kernel to upstream revision 20190509
    including one regression fix:
    * Prevent excessive ACPI debug messages from being printed
      by moving the ACPI_DEBUG_DEFAULT definition to the right
      place (Erik Schmauss).
 
  - Set the enable_for_wake bits for wakeup GPEs during suspend to
    idle to allow acpi_enable_all_wakeup_gpes() to enable them as
    aproppriate and make wakeup devices sighaling events through ACPI
    GPEs work with suspend-to-idle again (Rajat Jain).
 
  - Use 64 bits to store the return values of _ADR which are assumed
    to be 64-bit by some bus specs and may contain nonzero bits in the
    upper 32 bits part for some devices (Pierre-Louis Bossart).
 
  - Fix two minor issues with the ACPI documentation (Sakari Ailus).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzb4csSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx3NoQAKA9d7c8hfTX0IhFCvp4ya8wouJdF3Yf
 1HG46/GJSfmW0t5MWq3u1GnOJMJyi1rOAuSi+7AnHoPioiBW/nAylWRNp3ZyL/Tg
 fBxnpWEcM/hv9/ZZ2X456pH49VsJrfl1MtcRHeQrMHRLr+pFjmRVSKtXXIuf1whA
 N8mjgGRf7S7CVlg6F+ojJDzxgM0FOu+0elildxDmdSLxuGrhvTVxlGtme8z5GVRa
 EDWsAk6euplO3CMANhoNG0KGk20u+pEVRtg/+y7HOD21kiaMwqR7Ip6i+ZRz74uu
 KaW2TTFluBVyGjpgCC27uR64MfB6PmmMvbw+rQkylP3viLfZL+NHrBZQPZJnWtHq
 DlET3sQoNmXhjhajS3HC/d2pwtGhijX/gIW5E3AJhcLfhYNJdzpqGYWzpBg6RTZN
 k0EFZ+81yhup7to9T0ORT3UYSCwotutrXmMttk7wmlNjNqR+pvsFIo6PzYSPWm0u
 a8hHtc2U7X/3f/XosdMhZu4r3v7T/eDaZYk7GT1/EbXe6AkdL3qR8PX1FKoFZfUL
 YrL6b9bHKq8hhh4veqkEfFGNtEJcgkcU3b2BrTedSZ+v+GkORZAyQGDwmaZYmqz9
 SsusRGzHXBZ2szL/SHvLu1KPLuBKJmj3WiYbcX6I0QsCfYLgOjmv1vVQO1GaNsqT
 lPuX5awFrnbU
 =/71L
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "These fix two regressions introduced during the 5.0 cycle, in ACPICA
  and in device PM, cause the values returned by _ADR to be stored in 64
  bits and fix two ACPI documentation issues.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190509
     including one regression fix:
       * Prevent excessive ACPI debug messages from being printed by
         moving the ACPI_DEBUG_DEFAULT definition to the right place
         (Erik Schmauss).

   - Set the enable_for_wake bits for wakeup GPEs during suspend to idle
     to allow acpi_enable_all_wakeup_gpes() to enable them as
     aproppriate and make wakeup devices sighaling events through ACPI
     GPEs work with suspend-to-idle again (Rajat Jain).

   - Use 64 bits to store the return values of _ADR which are assumed to
     be 64-bit by some bus specs and may contain nonzero bits in the
     upper 32 bits part for some devices (Pierre-Louis Bossart).

   - Fix two minor issues with the ACPI documentation (Sakari Ailus)"

* tag 'acpi-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Set enable_for_wake for wakeup GPEs during suspend-to-idle
  Documentation: ACPI: Direct references are allowed to devices only
  Documentation: ACPI: Use tabs for graph ASL indentation
  ACPICA: Update version to 20190509
  ACPICA: Linux: move ACPI_DEBUG_DEFAULT flag out of ifndef
  ACPI: bus: change _ADR representation to 64 bits
2019-05-15 08:58:49 -07:00
Rafael J. Wysocki
e3e28670bb Merge branches 'acpi-bus', 'acpi-doc' and 'acpi-pm'
* acpi-bus:
  ACPI: bus: change _ADR representation to 64 bits

* acpi-doc:
  Documentation: ACPI: Direct references are allowed to devices only
  Documentation: ACPI: Use tabs for graph ASL indentation

* acpi-pm:
  ACPI: PM: Set enable_for_wake for wakeup GPEs during suspend-to-idle
2019-05-15 11:03:16 +02:00
Bob Moore
811b4c9eaf ACPICA: Update version to 20190509
ACPICA commit 36449fa1dc914113f2b096622d22c2621fd22861

Version 20190509.

Link: https://github.com/acpica/acpica/commit/36449fa1
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-13 10:34:21 +02:00
Erik Schmauss
11207b4dc2 ACPICA: Linux: move ACPI_DEBUG_DEFAULT flag out of ifndef
ACPICA commit c14f17fa0acf8c93497ce04b9a7f4ada51b69383

This flag should not be included in #ifndef CONFIG_ACPI. It should be
used unconditionally.

Link: https://github.com/acpica/acpica/commit/c14f17fa
Fixes: aa9aaa4d61 ("ACPI: use different default debug value than ACPICA")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Tested-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-13 10:34:21 +02:00
Pierre-Louis Bossart
ca6f998cf9 ACPI: bus: change _ADR representation to 64 bits
Standards such as the MIPI DisCo for SoundWire 1.0 specification
assume the _ADR field is 64 bits.

_ADR is defined as an "Integer" represented as 64 bits since ACPI 2.0
released in 2002. The low levels already use _ADR as 64 bits, e.g. in
struct acpi_device_info.

This patch bumps the representation used for sysfs to 64 bits. To
avoid any compatibility/ABI issues, the printf format is only extended
to 16 characters when the actual _ADR value exceeds the 32 bit
maximum.

Example with a SoundWire device, the results show the complete
vendorID and linkID which were omitted before:

Before:
$ more /sys/bus/acpi/devices/device\:38/adr
0x5d070000
After:
$ more /sys/bus/acpi/devices/device\:38/adr
0x000010025d070000

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ rjw: Replace 0xFFFFFFFF with U32_MAX, clean up subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-10 12:30:45 +02:00
Linus Torvalds
cf482a49af Driver core/kobject patches for 5.2-rc1
Here is the "big" set of driver core patches for 5.2-rc1
 
 There are a number of ACPI patches in here as well, as Rafael said they
 should go through this tree due to the driver core changes they
 required.  They have all been acked by the ACPI developers.
 
 There are also a number of small subsystem-specific changes in here, due
 to some changes to the kobject core code.  Those too have all been acked
 by the various subsystem maintainers.
 
 As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHDbw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynDAgCfbb4LBR6I50wFXb8JM/R6cAS7qrsAn1unshKV
 8XCYcif2RxjtdJWXbjdm
 =/rLh
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core/kobject updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.2-rc1

  There are a number of ACPI patches in here as well, as Rafael said
  they should go through this tree due to the driver core changes they
  required. They have all been acked by the ACPI developers.

  There are also a number of small subsystem-specific changes in here,
  due to some changes to the kobject core code. Those too have all been
  acked by the various subsystem maintainers.

  As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
  kobject: clean up the kobject add documentation a bit more
  kobject: Fix kernel-doc comment first line
  kobject: Remove docstring reference to kset
  firmware_loader: Fix a typo ("syfs" -> "sysfs")
  kobject: fix dereference before null check on kobj
  Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
  init/config: Do not select BUILD_BIN2C for IKCONFIG
  Provide in-kernel headers to make extending kernel easier
  kobject: Improve doc clarity kobject_init_and_add()
  kobject: Improve docs for kobject_add/del
  driver core: platform: Fix the usage of platform device name(pdev->name)
  livepatch: Replace klp_ktype_patch's default_attrs with groups
  cpufreq: schedutil: Replace default_attrs field with groups
  padata: Replace padata_attr_type default_attrs field with groups
  irqdesc: Replace irq_kobj_type's default_attrs field with groups
  net-sysfs: Replace ktype default_attrs field with groups
  block: Replace all ktype default_attrs with groups
  samples/kobject: Replace foo_ktype's default_attrs field with groups
  kobject: Add support for default attribute groups to kobj_type
  driver core: Postpone DMA tear-down until after devres release for probe failure
  ...
2019-05-07 13:01:40 -07:00
Rafael J. Wysocki
7e8e05fd08 Merge branches 'acpi-utils', 'acpi-video', 'acpi-soc' and 'acpi-button'
* acpi-utils:
  gpio: merrifield: Fix build err without CONFIG_ACPI
  ACPI / utils: Remove deprecated function since no user left
  ASoC: Intel: cht_bsw_rt5672: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: cht_bsw_rt5645: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcr_rt5651: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcr_rt5640: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcht_es8316: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcht_da7213: Convert to use acpi_dev_get_first_match_dev()
  gpio: merrifield: Convert to use acpi_dev_get_first_match_dev()
  extcon: axp288: Convert to use acpi_dev_get_first_match_dev()
  ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper

* acpi-video:
  ACPI: video: Use vendor backlight on Sony VPCEH3U1E

* acpi-soc:
  ACPI / LPSS: Use acpi_lpss_* instead of acpi_subsys_* functions for hibernate

* acpi-button:
  ACPI: button: reinitialize button state upon resume
2019-05-06 10:50:08 +02:00
Alison Schofield
57f5cf6ed8 acpi/hmat: Update acpi_hmat_type enum with ACPI_HMAT_TYPE_PROXIMITY
ACPI 6.3 changed the subtable "Memory Subsystem Address Range Structure"
to "Memory Proximity Domain Attributes Structure".

Updating and renaming of the structure was included in commit:
ACPICA: ACPI 6.3: HMAT updates (9a8d961f1e)

Rename the enum type to match the subtable and structure naming.

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 21:24:38 +02:00
YueHaibing
fe066621c7 gpio: merrifield: Fix build err without CONFIG_ACPI
When building CONFIG_ACPI is not set
gcc warn this:

drivers/gpio/gpio-merrifield.c: In function mrfld_gpio_get_pinctrl_dev_name:
drivers/gpio/gpio-merrifield.c:388:19: error: dereferencing pointer to incomplete type struct acpi_device
   put_device(&adev->dev);
                   ^~

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d00d2109c3 ("gpio: merrifield: Convert to use acpi_dev_get_first_match_dev()")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-23 11:30:59 +02:00
Bob Moore
6c6a828f86 ACPICA: Update version to 20190405
ACPICA commit 0c1495275a35071b957ab59549761c6cd3f413b7

Version 20190405.

Link: https://github.com/acpica/acpica/commit/0c149527
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 11:25:27 +02:00
Bob Moore
985d5124bf ACPICA: Update version to 20190329
ACPICA commit 802ec363be67580f52251219ef90613008495392

Version 20190329.

Link: https://github.com/acpica/acpica/commit/802ec363
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 11:25:27 +02:00
Bob Moore
3278675567 ACPICA: Rename nameseg length macro/define for clarity
ACPICA commit 24870bd9e73d71e2a1ff0a1e94519f8f8409e57d

ACPI_NAME_SIZE changed to ACPI_NAMESEG_SIZE
This clarifies that this is the length of an individual
nameseg, not the length of a generic namestring/namepath.
Improves understanding of the code.

Link: https://github.com/acpica/acpica/commit/24870bd9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 11:24:48 +02:00
Bob Moore
5599fb6935 ACPICA: Rename nameseg compare macro for clarity
ACPICA commit 92ec0935f27e217dff0b176fca02c2ec3d782bb5

ACPI_COMPARE_NAME changed to ACPI_COMPARE_NAMESEG
This clarifies (1) this is a compare on 4-byte namesegs, not
a generic compare. Improves understanding of the code.

Link: https://github.com/acpica/acpica/commit/92ec0935
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 10:08:28 +02:00
Bob Moore
a3ce7a8e0d ACPICA: Rename nameseg copy macro for clarity
ACPICA commit 19c18d3157945d1b8b64a826f0a8e848b7dbb127

ACPI_MOVE_NAME changed to ACPI_COPY_NAMESEG
This clarifies (1) this is a copy operation, and
(2) it operates on ACPI name_segs.
Improves understanding of the code.

Link: https://github.com/acpica/acpica/commit/19c18d31
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 10:08:28 +02:00
Andy Shevchenko
257f9053c0 ACPI / utils: Remove deprecated function since no user left
There is no more user of acpi_dev_get_first_match_name(),
which is deprecated and has no user left, so, remove it for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-01 11:00:16 +02:00
Andy Shevchenko
817b4d64da ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper
The acpi_dev_get_first_match_name() is missing put_device() call
and thus keeping reference counting unbalanced.

In order to fix the issue introduce a new helper to convert existing users
one-by-one to a better API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-01 10:55:56 +02:00
Erik Schmauss
aa9aaa4d61 ACPI: use different default debug value than ACPICA
Rather than setting debug output flags during early init, its makes
more sense to simply re-define ACPI_DEBUG_DEFAULT specifically for
Linux.

ACPICA commit 60903715711f4b00ca1831779a8a23279a66497d

Link: https://github.com/acpica/acpica/commit/60903715
Fixes: ce5cbf5349 ("ACPI: Set debug output flags independent of ACPICA")
Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-25 10:45:59 +01:00
Linus Torvalds
d276709ce6 ACPI updates for 5.1-rc1
- Update the ACPICA code in the kernel to upstream revision 20190215
    including ACPI 6.3 support and more:
    * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
      Schmauss).
    * Update of the PCC Identifier structure in PDTT (Erik Schmauss).
    * Support for new Generic Affinity Structure subtable in SRAT
      (Erik Schmauss).
    * New PCC operation region support (Erik Schmauss).
    * Support for GICC statistical profiling for MADT (Erik Schmauss).
    * New Error Disconnect Recover notification support (Erik Schmauss).
    * New PPTT Processor Structure Flags fields support (Erik Schmauss).
    * ACPI 6.3 HMAT updates (Erik Schmauss).
    * GTDT Revision 3 support (Erik Schmauss).
    * Legacy module-level code (MLC) support removal (Erik Schmauss).
    * Update/clarification of messages for control method failures
      (Bob Moore).
    * Warning on creation of a zero-length opregion (Bob Moore).
    * acpiexec option to dump extra info for memory leaks (Bob Moore).
    * More ACPI error to firmware error conversions (Bob Moore).
    * Debugger fix (Bob Moore).
    * Copyrights update (Bob Moore).
 
  - Clean up sleep states support code in ACPICA (Christoph Hellwig).
 
  - Rework in_nmi() handling in the APEI code and add suppor for the
    ARM Software Delegated Exception Interface (SDEI) to it (James
    Morse).
 
  - Fix possible out-of-bounds accesses in BERT-related core (Ross
    Lagerwall).
 
  - Fix the APEI code parsing HEST that includes a Deferred Machine
    Check subtable (Yazen Ghannam).
 
  - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
    (YueHaibing).
 
  - Switch the APEI ERST code to the new generic UUID API (Andy
    Shevchenko).
 
  - Update the MAINTAINERS entry for APEI (Borislav Petkov).
 
  - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui).
 
  - Fix DMI checks handling in the ACPI backlight driver and add the
    "Lunch Box" chassis-type check to it (Hans de Goede).
 
  - Add support for using ACPI table overrides included in built-in
    initrd images (Shunyong Yang).
 
  - Update ACPI device enumeration to treat the PWM2 device as "always
    present" on Lenovo Yoga Book (Yauhen Kharuzhy).
 
  - Fix up the enumeration of device objects with the PRP0001 device
    ID (Andy Shevchenko).
 
  - Clean up PPTT parsing error messages (John Garry).
 
  - Clean up debugfs files creation handling (Greg Kroah-Hartman,
    Rafael Wysocki).
 
  - Clean up the ACPI DPTF Makefile (Masahiro Yamada).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcfSIaAAoJEILEb/54YlRxvL8P/2oiG+u3tm3JahQ2tk9iiX3S
 4yjYMB5Gmhua3w/t6tnRHHhy3pjjgI6xH5S7WB0VPTMp57E91EQihcbLJNFiJ1Jf
 zjeZtWSmoxvcVwHAXq0DZHFMRK9Xgc/1ckzWNH/pwVlBSgaYazuLr6bwtZhtorci
 eNWi82abWfAp6kAXjzJkcFbEp9+H6JzseewKcT8VAKn63KZizCEzxT0PuE9c54km
 QnILVB9we0aGD2i0w2BRpbz99Wse0vnoUkBcrDw0LFHCaEQjfyAa94YFVQVrkE1Q
 ynH26+yQanyzH00q/HWuH7N7YdcYMYT1CgZoIKR5XtJ+CbTc63VQez4csLOgOFMM
 VEwmuv5SdRQ+tLCNFn71dxRheAttKI/nGBAZWMRTLQkp412IrQP4BtWw4wFM8SHZ
 3G7eReR/bBeS4u1T5KR8CVVxchinDdwnTvqQII1uEniX80AmsHsQZxtU+JdPDp+w
 N6gUE+lPF8e4iT+YsrWFMoNsJ9/MoXbSPQK1oYIcL0f5+PjFMxjTbA53wDiMHAhS
 9AqVW1fdSPX0ImV3DuDqHph3ekAt26QHKxIA2xj5WTRWKf+29ijO2+5zU8isT7kI
 RfGzpvsSYdvPyIRLUqc/Q3d5u/ElacAaaKJNT+6gUT4AkINAZJKQRiw2dWO1g82O
 HVuSc5hRfnAJ5ALfCdIG
 =r6fU
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These are ACPICA updates including ACPI 6.3 support among other
  things, APEI updates including the ARM Software Delegated Exception
  Interface (SDEI) support, ACPI EC driver fixes and cleanups and other
  assorted improvements.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190215
     including ACPI 6.3 support and more:
      * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
        Schmauss).
      * Update of the PCC Identifier structure in PDTT (Erik Schmauss).
      * Support for new Generic Affinity Structure subtable in SRAT
        (Erik Schmauss).
      * New PCC operation region support (Erik Schmauss).
      * Support for GICC statistical profiling for MADT (Erik Schmauss).
      * New Error Disconnect Recover notification support (Erik
        Schmauss).
      * New PPTT Processor Structure Flags fields support (Erik
        Schmauss).
      * ACPI 6.3 HMAT updates (Erik Schmauss).
      * GTDT Revision 3 support (Erik Schmauss).
      * Legacy module-level code (MLC) support removal (Erik Schmauss).
      * Update/clarification of messages for control method failures
        (Bob Moore).
      * Warning on creation of a zero-length opregion (Bob Moore).
      * acpiexec option to dump extra info for memory leaks (Bob Moore).
      * More ACPI error to firmware error conversions (Bob Moore).
      * Debugger fix (Bob Moore).
      * Copyrights update (Bob Moore)

   - Clean up sleep states support code in ACPICA (Christoph Hellwig)

   - Rework in_nmi() handling in the APEI code and add suppor for the
     ARM Software Delegated Exception Interface (SDEI) to it (James
     Morse)

   - Fix possible out-of-bounds accesses in BERT-related core (Ross
     Lagerwall)

   - Fix the APEI code parsing HEST that includes a Deferred Machine
     Check subtable (Yazen Ghannam)

   - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
     (YueHaibing)

   - Switch the APEI ERST code to the new generic UUID API (Andy
     Shevchenko)

   - Update the MAINTAINERS entry for APEI (Borislav Petkov)

   - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui)

   - Fix DMI checks handling in the ACPI backlight driver and add the
     "Lunch Box" chassis-type check to it (Hans de Goede)

   - Add support for using ACPI table overrides included in built-in
     initrd images (Shunyong Yang)

   - Update ACPI device enumeration to treat the PWM2 device as "always
     present" on Lenovo Yoga Book (Yauhen Kharuzhy)

   - Fix up the enumeration of device objects with the PRP0001 device ID
     (Andy Shevchenko)

   - Clean up PPTT parsing error messages (John Garry)

   - Clean up debugfs files creation handling (Greg Kroah-Hartman,
     Rafael Wysocki)

   - Clean up the ACPI DPTF Makefile (Masahiro Yamada)"

* tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
  ACPI / bus: Respect PRP0001 when retrieving device match data
  ACPICA: Update version to 20190215
  ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
  ACPICA: ACPI 6.3: add GTDT Revision 3 support
  ACPICA: ACPI 6.3: HMAT updates
  ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
  ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
  ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
  ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
  efi: cper: Fix possible out-of-bounds access
  ACPI: APEI: Fix possible out-of-bounds access to BERT region
  ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
  ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
  ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
  ACPICA: Update/clarify messages for control method failures
  ACPICA: Debugger: Fix possible fault with the "test objects" command
  ACPICA: Interpreter: Emit warning for creation of a zero-length op region
  ACPICA: Remove legacy module-level code support
  ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book
  ACPI / video: Extend chassis-type detection with a "Lunch Box" check
  ..
2019-03-06 13:33:11 -08:00
Rafael J. Wysocki
dcaed592b2 Merge branch 'acpi-apei'
* acpi-apei: (29 commits)
  efi: cper: Fix possible out-of-bounds access
  ACPI: APEI: Fix possible out-of-bounds access to BERT region
  MAINTAINERS: Add James Morse to the list of APEI reviewers
  ACPI / APEI: Add support for the SDEI GHES Notification type
  firmware: arm_sdei: Add ACPI GHES registration helper
  ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications
  ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry()
  ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length
  ACPI / APEI: Make GHES estatus header validation more user friendly
  ACPI / APEI: Pass ghes and estatus separately to avoid a later copy
  ACPI / APEI: Let the notification helper specify the fixmap slot
  ACPI / APEI: Move locking to the notification helper
  arm64: KVM/mm: Move SEA handling behind a single 'claim' interface
  KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing
  ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue
  ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI
  ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors
  ACPI / APEI: Generalise the estatus queue's notify code
  ACPI / APEI: Don't update struct ghes' flags in read/clear estatus
  ACPI / APEI: Remove spurious GHES_TO_CLEAR check
  ...
2019-03-04 11:16:35 +01:00
Bob Moore
6b31c01651 ACPICA: Update version to 20190215
ACPICA commit e66a8468f83fadb35aebeb534d8ef92622274696

Version 20190215

Link: https://github.com/acpica/acpica/commit/e66a8468
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:12:01 +01:00
Erik Schmauss
c163f90cc8 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:12:01 +01:00
Erik Schmauss
8f5a14d053 ACPICA: ACPI 6.3: add GTDT Revision 3 support
ACPICA commit 2cd926fdf360062adcaac1349cb94136590c1c74

Link: https://github.com/acpica/acpica/commit/2cd926fd
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:12:00 +01:00
Erik Schmauss
9a8d961f1e ACPICA: ACPI 6.3: HMAT updates
ACPICA commit a216e8ca9f7c79f90788b193e2e61151b2c973c0

This change reserves several field and renames subtable 0 to
"memory proximity domain attributes"

Link: https://github.com/acpica/acpica/commit/a216e8ca
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:12:00 +01:00
Erik Schmauss
b5eab512e7 ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
ACPICA commit c736ea34add19a3a07e0e398711847cd6b95affd

Link: https://github.com/acpica/acpica/commit/c736ea34
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:12:00 +01:00
Erik Schmauss
ddcfd66c1d ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
ACPICA commit 205ac8fc721073f1e609df963b14ef2237aeba73

Link: https://github.com/acpica/acpica/commit/205ac8fc
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:11:59 +01:00
Erik Schmauss
e646e0a50c ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
ACPICA commit 31b184052a986dc8d80c878edeca574d4ffa1cf5

Link: https://github.com/acpica/acpica/commit/31b18405
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:11:59 +01:00
Xiongfeng Wang
1757d05f31 ACPI / CPPC: Add a helper to get desired performance
This patch add a helper to get the value of desired performance
register.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ rjw: More white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18 11:27:42 +01:00
Erik Schmauss
aa475a59ff ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
ACPICA commit 8c9eba7811a939a387d93d6c2a572d0887e64f2c

Link: https://github.com/acpica/acpica/commit/8c9eba78
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18 11:21:11 +01:00
Erik Schmauss
f00175d06b ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
ACPICA commit b11446d8b47805c2637a2286aca34b717ec6b5be

Link: https://github.com/acpica/acpica/commit/b11446d8
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18 11:21:11 +01:00
Erik Schmauss
aa342261bd ACPICA: Remove legacy module-level code support
ACPICA commit 47f5607c204719d9239a12b889df725225098c8f

Module-level code refers to executable ASL code that runs during
table load. This is typically used in ASL to declare named objects
based on a condition evaluated during table load like so:

definition_block(...)
{
  opreation_region (OPR1, system_memory, ...)
  Field (OPR1)
  {
    FLD1, 8 /* Assume that FLD1's value is 0x1 */
  }

  /* The if statement below is referred to as module-level code */

  If (FLD1)
  {
    /* Declare DEV1 conditionally */
    Device (DEV1) {...}
  }

  Device (DEV2)
  {
    ...
  }
}

In legacy module-level code, the execution of the If statement
was deferred after other modules were loaded. The order of
code execution for the table above is the following:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Load DEV2 to the ACPI Namespace
4.) Execute If (FLD1) and load DEV1 if the condition is true

This legacy approach can be problematic for tables that look like the
following:

definition_block(...)
{
  opreation_region (OPR1, system_memory, ...)
  Field (OPR1)
  {
    FLD1, 8 /* Assume that FLD1's value is 0x1 */
  }

  /* The if statement below is referred to as module-level code */

  If (FLD1)
  {
    /* Declare DEV1 conditionally */
    Device (DEV1) {...}
  }

  Scope (DEV1)
  {
    /* Add objects DEV1's scope */
    Name (OBJ1, 0x1234)
  }
}

When loading this in the legacy approach, Scope DEV1 gets evaluated
before the If statement. The following is the order of execution:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Add OBJ1 under DEV1's scope -- ERROR. DEV1 does not exist
4.) Execute If (FLD1) and load DEV1 if the condition is true

The legacy approach can never succeed for tables like this due to the
deferral of the module-level code. Due to this limitation, a new
module-level code was developed. This new approach exeutes if
statements in the order that they appear in the definition block.
With this approach, the order of execution for the above defintion
block is as follows:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Execute If (FLD1) and load DEV1 because the condition is true
4.) Add OBJ1 under DEV1's scope.

Since DEV1 is loaded in the namespace in step 3, step 4 executes
successfully.

This change removes support for the legacy module-level code
execution. From this point onward, the new module-level code
execution will be the official approach.

Link: https://github.com/acpica/acpica/commit/47f5607c
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18 11:21:10 +01:00
James Morse
5cc6c68287 ACPI / APEI: Don't update struct ghes' flags in read/clear estatus
ghes_read_estatus() sets a flag in struct ghes if the buffer of
CPER records needs to be cleared once the records have been
processed. This flag value is a problem if a struct ghes can be
processed concurrently, as happens at probe time if an NMI arrives
for the same error source. The NMI clears the flag, meaning the
interrupted handler may never do the ghes_estatus_clear() work.

The GHES_TO_CLEAR flags is only set at the same time as
buffer_paddr, which is now owned by the caller and passed to
ghes_clear_estatus(). Use this value as the flag.

A non-zero buf_paddr returned by ghes_read_estatus() means
ghes_clear_estatus() should clear this address. ghes_read_estatus()
already checks for a read of error_status_address being zero,
so CPER records cannot be written here.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-07 23:10:45 +01:00
James Morse
eeb2555779 ACPI / APEI: Don't store CPER records physical address in struct ghes
When CPER records are found the address of the records is stashed
in the struct ghes. Once the records have been processed, this
address is overwritten with zero so that it won't be processed
again without being re-populated by firmware.

This goes wrong if a struct ghes can be processed concurrently,
as can happen at probe time when an NMI occurs. If the NMI arrives
on another CPU, the probing CPU may call ghes_clear_estatus() on the
records before the handler had finished with them.
Even on the same CPU, once the interrupted handler is resumed, it
will call ghes_clear_estatus() on the NMIs records, this memory may
have already been re-used by firmware.

Avoid this stashing by letting the caller hold the address. A
later patch will do away with the use of ghes->flags in the
read/clear code too.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-07 23:10:45 +01:00
James Morse
fb7be08f1a ACPI / APEI: Make estatus pool allocation a static size
Adding new NMI-like notifications duplicates the calls that grow
and shrink the estatus pool. This is all pretty pointless, as the
size is capped to 64K. Allocate this for each ghes and drop
the code that grows and shrinks the pool.

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-07 23:10:45 +01:00