Commit Graph

1207 Commits

Author SHA1 Message Date
Xin Long
47faa1e4c5 sctp: remove the dead field of sctp_transport
After we use refcnt to check if transport is alive, the dead can be
removed from sctp_transport.

The traversal of transport_addr_list in procfs dump is using
list_for_each_entry_rcu, no need to check if it has been freed.

sctp_generate_t3_rtx_event and sctp_generate_heartbeat_event is
protected by sock lock, it's not necessary to check dead, either.
also, the timers are cancelled when sctp_transport_free() is
called, that it doesn't wait for refcnt to reach 0 to cancel them.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28 15:59:32 -08:00
Xin Long
fba4c330c5 sctp: hold transport before we access t->asoc in sctp proc
Previously, before rhashtable, /proc assoc listing was done by
read-locking the entire hash entry and dumping all assocs at once, so we
were sure that the assoc wasn't freed because it wouldn't be possible to
remove it from the hash meanwhile.

Now we use rhashtable to list transports, and dump entries one by one.
That is, now we have to check if the assoc is still a good one, as the
transport we got may be being freed.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28 15:59:32 -08:00
Xin Long
1eed677933 sctp: fix the transport dead race check by using atomic_add_unless on refcnt
Now when __sctp_lookup_association is running in BH, it will try to
check if t->dead is set, but meanwhile other CPUs may be freeing this
transport and this assoc and if it happens that
__sctp_lookup_association checked t->dead a bit too early, it may think
that the association is still good while it was already freed.

So we fix this race by using atomic_add_unless in sctp_transport_hold.
After we get one transport from hashtable, we will hold it only when
this transport's refcnt is not 0, so that we can make sure t->asoc
cannot be freed before we hold the asoc again.

Note that sctp association is not freed using RCU so we can't use
atomic_add_unless() with it as it may just be too late for that either.

Fixes: 4f00878126 ("sctp: apply rhashtable api to send/recv path")
Reported-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28 15:59:32 -08:00
Marcelo Ricardo Leitner
27f7ed2b11 sctp: allow setting SCTP_SACK_IMMEDIATELY by the application
This patch extends commit b93d647174 ("sctp: implement the sender side
for SACK-IMMEDIATELY extension") as it didn't white list
SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be
understood as an invalid flag and returning -EINVAL to the application.

Note that the actual handling of the flag is already there in
sctp_datamsg_from_user().

https://tools.ietf.org/html/rfc7053#section-7

Fixes: b93d647174 ("sctp: implement the sender side for SACK-IMMEDIATELY extension")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24 22:43:21 -08:00
Xin Long
dd7445ad6b sctp: the temp asoc's transports should not be hashed/unhashed
Re-establish the previous behavior and avoid hashing temporary asocs by
checking t->asoc->temp in sctp_(un)hash_transport. Also, remove the
check of t->asoc->temp in __sctp_lookup_association, since they are
never hashed now.

Fixes: 4f00878126 ("sctp: apply rhashtable api to send/recv path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reported-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-17 19:11:44 -05:00
Geert Uytterhoeven
fb3311853c net: sctp: Move sequence start handling into sctp_transport_get_idx()
net/sctp/proc.c: In function ‘sctp_transport_get_idx’:
net/sctp/proc.c:313: warning: ‘obj’ may be used uninitialized in this function

This is currently a false positive, as all callers check for a zero
offset first, and handle this case in the exact same way.

Move the check and handling into sctp_transport_get_idx() to kill the
compiler warning, and avoid future bugs.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15 15:11:55 -05:00
Xin Long
65a5124a71 sctp: support to lookup with ep+paddr in transport rhashtable
Now, when we sendmsg, we translate the ep to laddr by selecting the
first element of the list, and then do a lookup for a transport.

But sctp_hash_cmp() will compare it against asoc addr_list, which may
be a subset of ep addr_list, meaning that this chosen laddr may not be
there, and thus making it impossible to find the transport.

So we fix it by using ep + paddr to lookup transports in hashtable. In
sctp_hash_cmp, if .ep is set, we will check if this ep == asoc->ep,
or we will do the laddr check.

Fixes: d6c0256a60 ("sctp: add the rhashtable apis for sctp global transport hashtable")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reported-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15 14:41:36 -05:00
David S. Miller
9d367eddf3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/bonding/bond_main.c
	drivers/net/ethernet/mellanox/mlxsw/spectrum.h
	drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c

The bond_main.c and mellanox switch conflicts were cases of
overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 23:55:43 -05:00
Marcelo Ricardo Leitner
649621e3d5 sctp: fix use-after-free in pr_debug statement
Dmitry Vyukov reported a use-after-free in the code expanded by the
macro debug_post_sfx, which is caused by the use of the asoc pointer
after it was freed within sctp_side_effect() scope.

This patch fixes it by allowing sctp_side_effect to clear that asoc
pointer when the TCB is freed.

As Vlad explained, we also have to cover the SCTP_DISPOSITION_ABORT case
because it will trigger DELETE_TCB too on that same loop.

Also, there were places issuing SCTP_CMD_INIT_FAILED and ASSOC_FAILED
but returning SCTP_DISPOSITION_CONSUME, which would fool the scheme
above. Fix it by returning SCTP_DISPOSITION_ABORT instead.

The macro is already prepared to handle such NULL pointer.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 17:13:01 -05:00
Sasha Levin
320f1a4a17 net: sctp: prevent writes to cookie_hmac_alg from accessing invalid memory
proc_dostring() needs an initialized destination string, while the one
provided in proc_sctp_do_hmac_alg() contains stack garbage.

Thus, writing to cookie_hmac_alg would strlen() that garbage and end up
accessing invalid memory.

Fixes: 3c68198e7 ("sctp: Make hmac algorithm selection for cookie generation dynamic")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10 18:01:01 -05:00
Xin Long
c79c066691 sctp: remove the local_bh_disable/enable in sctp_endpoint_lookup_assoc
sctp_endpoint_lookup_assoc is called in the protection of sock lock
there is no need to call local_bh_disable in this function. so remove
them.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05 12:24:02 -05:00
Xin Long
b5eff71283 sctp: drop the old assoc hashtable of sctp
transport hashtable will replace the association hashtable,
so association hashtable is not used in sctp any more, so
drop the codes about that.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05 12:24:01 -05:00
Xin Long
39f66a7dce sctp: apply rhashtable api to sctp procfs
Traversal the transport rhashtable, get the association only once through
the condition assoc->peer.primary_path != transport.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05 12:24:01 -05:00
Xin Long
4f00878126 sctp: apply rhashtable api to send/recv path
apply lookup apis to two functions, for __sctp_endpoint_lookup_assoc
and __sctp_lookup_association, it's invoked in the protection of sock
lock, it will be safe, but sctp_lookup_association need to call
rcu_read_lock() and to detect the t->dead to protect it.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05 12:24:01 -05:00
Xin Long
d6c0256a60 sctp: add the rhashtable apis for sctp global transport hashtable
tranport hashtbale will replace the association hashtable to do the
lookup for transport, and then get association by t->assoc, rhashtable
apis will be used because of it's resizable, scalable and using rcu.

lport + rport + paddr will be the base hashkey to locate the chain,
with net to protect one netns from another, then plus the laddr to
compare to get the target.

this patch will provider the lookup functions:
- sctp_epaddr_lookup_transport
- sctp_addrs_lookup_transport

hash/unhash functions:
- sctp_hash_transport
- sctp_unhash_transport

init/destroy functions:
- sctp_transport_hashtable_init
- sctp_transport_hashtable_destroy

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05 12:24:00 -05:00
David S. Miller
c07f30ad68 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-12-31 18:20:10 -05:00
Xin Long
068d8bd338 sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close
In sctp_close, sctp_make_abort_user may return NULL because of memory
allocation failure. If this happens, it will bypass any state change
and never free the assoc. The assoc has no chance to be freed and it
will be kept in memory with the state it had even after the socket is
closed by sctp_close().

So if sctp_make_abort_user fails to allocate memory, we should abort
the asoc via sctp_primitive_ABORT as well. Just like the annotation in
sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said,
"Even if we can't send the ABORT due to low memory delete the TCB.
This is a departure from our typical NOMEM handling".

But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would
dereference the chunk pointer, and system crash. So we should add
SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other
places where it adds SCTP_CMD_REPLY cmd.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30 16:57:16 -05:00
Marcelo Ricardo Leitner
3538a5c8ff sctp: label accepted/peeled off sockets
Accepted or peeled off sockets were missing a security label (e.g.
SELinux) which means that socket was in "unlabeled" state.

This patch clones the sock's label from the parent sock and resolves the
issue (similar to AF_BLUETOOTH protocol family).

Cc: Paul Moore <pmoore@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-28 00:18:47 -05:00
Marcelo Ricardo Leitner
9ba0b9636d sctp: use GFP_USER for user-controlled kmalloc
Commit cacc062152 ("sctp: use GFP_USER for user-controlled kmalloc")
missed two other spots.

For connectx, as it's more likely to be used by kernel users of the API,
it detects if GFP_USER should be used or not.

Fixes: cacc062152 ("sctp: use GFP_USER for user-controlled kmalloc")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-28 00:18:47 -05:00
David S. Miller
b3e0d3d7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17 22:08:28 -05:00
Zhu Yanjun
566178f853 net: sctp: dynamically enable or disable pf state
As we all know, the value of pf_retrans >= max_retrans_path can
disable pf state. The variables of pf_retrans and max_retrans_path
can be changed by the userspace application.

Sometimes the user expects to disable pf state while the 2
variables are changed to enable pf state. So it is necessary to
introduce a new variable to disable pf state.

According to the suggestions from Vlad Yasevich, extra1 and extra2
are removed. The initialization of pf_enable is added.

Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16 10:56:50 -05:00
Eric Dumazet
6857a02af5 sctp: use GFP_KERNEL in sctp_init()
modules init functions being called from process context, we better
use GFP_KERNEL allocations to increase our chances to get these
high-order pages we want for SCTP hash tables.

This mostly matters if SCTP module is loaded once memory got fragmented.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:27:45 -05:00
Tom Herbert
53692b1de4 sctp: Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRC
The SCTP checksum is really a CRC and is very different from the
standards 1's complement checksum that serves as the checksum
for IP protocols. This offload interface is also very different.
Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRC to highlight these
differences. The term CSUM should be reserved in the stack to refer
to the standard 1's complement IP checksum.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 16:49:58 -05:00
Eric Dumazet
9470e24f35 ipv6: sctp: clone options to avoid use after free
SCTP is lacking proper np->opt cloning at accept() time.

TCP and DCCP use ipv6_dup_options() helper, do the same
in SCTP.

We might later factorize this code in a common helper to avoid
future mistakes.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-11 20:18:40 -05:00
Eric Dumazet
69ce6487dc ipv6: sctp: fix lockdep splat in sctp_v6_get_dst()
While cooking the sctp np->opt rcu fixes, I forgot to move
one rcu_read_unlock() after the added rcu_dereference() in
sctp_v6_get_dst()

This gave lockdep warnings reported by Dave Jones.

Fixes: c836a8ba93 ("ipv6: sctp: add rcu protection around np->opt")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07 17:07:33 -05:00
lucien
8a0d19c5ed sctp: start t5 timer only when peer rwnd is 0 and local state is SHUTDOWN_PENDING
when A sends a data to B, then A close() and enter into SHUTDOWN_PENDING
state, if B neither claim his rwnd is 0 nor send SACK for this data, A
will keep retransmitting this data until t5 timeout, Max.Retrans times
can't work anymore, which is bad.

if B's rwnd is not 0, it should send abort after Max.Retrans times, only
when B's rwnd == 0 and A's retransmitting beyonds Max.Retrans times, A
will start t5 timer, which is also commit f8d9605243 ("sctp: Enforce
retransmission limit during shutdown") means, but it lacks the condition
peer rwnd == 0.

so fix it by adding a bit (zero_window_announced) in peer to record if
the last rwnd is 0. If it was, zero_window_announced will be set. and use
this bit to decide if start t5 timer when local.state is SHUTDOWN_PENDING.

Fixes: commit f8d9605243 ("sctp: Enforce retransmission limit during shutdown")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-06 22:31:51 -05:00
lucien
8b570dc9f7 sctp: only drop the reference on the datamsg after sending a msg
If the chunks are enqueued successfully but sctp_cmd_interpreter()
return err to sctp_sendmsg() (mainly because of no mem), the chunks will
get re-queued, but we are dropping the reference and freeing them.

The fix is to just drop the reference on the datamsg just as it had
succeeded, as:
 - if the chunks weren't queued, this is enough to get them freed.
 - if they were queued, they will get freed when they finally get out or
 discarded.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-06 13:25:12 -05:00
lucien
69b5777f2e sctp: hold the chunks only after the chunk is enqueued in outq
When a msg is sent, sctp will hold the chunks of this msg and then try
to enqueue them. But if the chunks are not enqueued in sctp_outq_tail()
because of the invalid state, sctp_cmd_interpreter() may still return
success to sctp_sendmsg() after calling sctp_outq_flush(), these chunks
will become orphans and will leak.

So we fix them by moving sctp_chunk_hold() to sctp_outq_tail(), where we
are sure that the chunk is going to get queued.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-06 13:25:12 -05:00
Marcelo Ricardo Leitner
50a5ffb1ef sctp: also copy sk_tsflags when copying the socket
As we are keeping timestamps on when copying the socket, we also have to
copy sk_tsflags.

This is needed since b9f40e21ef ("net-timestamp: move timestamp flags
out of sk_flags").

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05 22:23:22 -05:00
Marcelo Ricardo Leitner
01ce63c901 sctp: update the netstamp_needed counter when copying sockets
Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy
related to disabling sock timestamp.

When SCTP accepts an association or peel one off, it copies sock flags
but forgot to call net_enable_timestamp() if a packet timestamping flag
was copied, leading to extra calls to net_disable_timestamp() whenever
such clones were closed.

The fix is to call net_enable_timestamp() whenever we copy a sock with
that flag on, like tcp does.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05 22:23:22 -05:00
Marcelo Ricardo Leitner
cb5e173ed7 sctp: use the same clock as if sock source timestamps were on
SCTP echoes a cookie o INIT ACK chunks that contains a timestamp, for
detecting stale cookies. This cookie is echoed back to the server by the
client and then that timestamp is checked.

Thing is, if the listening socket is using packet timestamping, the
cookie is encoded with ktime_get() value and checked against
ktime_get_real(), as done by __net_timestamp().

The fix is to sctp also use ktime_get_real(), so we can compare bananas
with bananas later no matter if packet timestamping was enabled or not.

Fixes: 52db882f3f ("net: sctp: migrate cookie life from timeval to ktime")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05 22:23:22 -05:00
David S. Miller
f188b951f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/renesas/ravb_main.c
	kernel/bpf/syscall.c
	net/ipv4/ipmr.c

All three conflicts were cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 21:09:12 -05:00
Eric Dumazet
602dd62dfb ipv6: sctp: implement sctp_v6_destroy_sock()
Dmitry Vyukov reported a memory leak using IPV6 SCTP sockets.

We need to call inet6_destroy_sock() to properly release
inet6 specific fields.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 12:05:57 -05:00
Eric Dumazet
c836a8ba93 ipv6: sctp: add rcu protection around np->opt
This patch completes the work I did in commit 45f6fad84c
("ipv6: add complete rcu protection around np->opt"), as I missed
sctp part.

This simply makes sure np->opt is used with proper RCU locking
and accessors.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:30:58 -05:00
Marcelo Ricardo Leitner
cacc062152 sctp: use GFP_USER for user-controlled kmalloc
Dmitry Vyukov reported that the user could trigger a kernel warning by
using a large len value for getsockopt SCTP_GET_LOCAL_ADDRS, as that
value directly affects the value used as a kmalloc() parameter.

This patch thus switches the allocation flags from all user-controllable
kmalloc size to GFP_USER to put some more restrictions on it and also
disables the warn, as they are not necessary.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02 23:39:46 -05:00
Eric Dumazet
ceb5d58b21 net: fix sock_wake_async() rcu protection
Dmitry provided a syzkaller (http://github.com/google/syzkaller)
triggering a fault in sock_wake_async() when async IO is requested.

Said program stressed af_unix sockets, but the issue is generic
and should be addressed in core networking stack.

The problem is that by the time sock_wake_async() is called,
we should not access the @flags field of 'struct socket',
as the inode containing this socket might be freed without
further notice, and without RCU grace period.

We already maintain an RCU protected structure, "struct socket_wq"
so moving SOCKWQ_ASYNC_NOSPACE & SOCKWQ_ASYNC_WAITDATA into it
is the safe route.

It also reduces number of cache lines needing dirtying, so might
provide a performance improvement anyway.

In followup patches, we might move remaining flags (SOCK_NOSPACE,
SOCK_PASSCRED, SOCK_PASSSEC) to save 8 bytes and let 'struct socket'
being mostly read and let it being shared between cpus.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01 15:45:05 -05:00
Eric Dumazet
9cd3e072b0 net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
This patch is a cleanup to make following patch easier to
review.

Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
from (struct socket)->flags to a (struct socket_wq)->flags
to benefit from RCU protection in sock_wake_async()

To ease backports, we rename both constants.

Two new helpers, sk_set_bit(int nr, struct sock *sk)
and sk_clear_bit(int net, struct sock *sk) are added so that
following patch can change their implementation.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01 15:45:05 -05:00
Herbert Xu
1ce0bf50ae net: Generalise wq_has_sleeper helper
The memory barrier in the helper wq_has_sleeper is needed by just
about every user of waitqueue_active.  This patch generalises it
by making it take a wait_queue_head_t directly.  The existing
helper is renamed to skwq_has_sleeper.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30 14:47:33 -05:00
lucien
ed5a377d87 sctp: translate host order to network order when setting a hmacid
now sctp auth cannot work well when setting a hmacid manually, which
is caused by that we didn't use the network order for hmacid, so fix
it by adding the transformation in sctp_auth_ep_set_hmacs.

even we set hmacid with the network order in userspace, it still
can't work, because of this condition in sctp_auth_ep_set_hmacs():

		if (id > SCTP_AUTH_HMAC_ID_MAX)
			return -EOPNOTSUPP;

so this wasn't working before and thus it won't break compatibility.

Fixes: 65b07e5d0d ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15 18:27:27 -05:00
Andrew Morton
79211c8ed1 remove abs64()
Switch everything to the new and more capable implementation of abs().
Mainly to give the new abs() a bit of a workout.

Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Linus Torvalds
ad804a0b2a Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:

 - most of the rest of MM

 - procfs

 - lib/ updates

 - printk updates

 - bitops infrastructure tweaks

 - checkpatch updates

 - nilfs2 update

 - signals

 - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc,
   dma-debug, dma-mapping, ...

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
  ipc,msg: drop dst nil validation in copy_msg
  include/linux/zutil.h: fix usage example of zlib_adler32()
  panic: release stale console lock to always get the logbuf printed out
  dma-debug: check nents in dma_sync_sg*
  dma-mapping: tidy up dma_parms default handling
  pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
  kexec: use file name as the output message prefix
  fs, seqfile: always allow oom killer
  seq_file: reuse string_escape_str()
  fs/seq_file: use seq_* helpers in seq_hex_dump()
  coredump: change zap_threads() and zap_process() to use for_each_thread()
  coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
  signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)
  signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
  signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
  signals: kill block_all_signals() and unblock_all_signals()
  nilfs2: fix gcc uninitialized-variable warnings in powerpc build
  nilfs2: fix gcc unused-but-set-variable warnings
  MAINTAINERS: nilfs2: add header file for tracing
  nilfs2: add tracepoints for analyzing reading and writing metadata files
  ...
2015-11-07 14:32:45 -08:00
Linus Torvalds
75021d2859 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "Trivial stuff from trivial tree that can be trivially summed up as:

   - treewide drop of spurious unlikely() before IS_ERR() from Viresh
     Kumar

   - cosmetic fixes (that don't really affect basic functionality of the
     driver) for pktcdvd and bcache, from Julia Lawall and Petr Mladek

   - various comment / printk fixes and updates all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  bcache: Really show state of work pending bit
  hwmon: applesmc: fix comment typos
  Kconfig: remove comment about scsi_wait_scan module
  class_find_device: fix reference to argument "match"
  debugfs: document that debugfs_remove*() accepts NULL and error values
  net: Drop unlikely before IS_ERR(_OR_NULL)
  mm: Drop unlikely before IS_ERR(_OR_NULL)
  fs: Drop unlikely before IS_ERR(_OR_NULL)
  drivers: net: Drop unlikely before IS_ERR(_OR_NULL)
  drivers: misc: Drop unlikely before IS_ERR(_OR_NULL)
  UBI: Update comments to reflect UBI_METAONLY flag
  pktcdvd: drop null test before destroy functions
2015-11-07 13:05:44 -08:00
Mel Gorman
d0164adc89 mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts.  They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve".  __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available.  Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative.  High priority users continue to use
__GFP_HIGH.  __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim.  __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim.  __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
  pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
  __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
  into this category where kswapd will still be woken but atomic reserves
  are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
  helper gfpflags_allow_blocking() where possible. This is because
  checking for __GFP_WAIT as was done historically now can trigger false
  positives. Some exceptions like dm-crypt.c exist where the code intent
  is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
  flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
  and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL.  They may
now wish to specify __GFP_KSWAPD_RECLAIM.  It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Arnd Bergmann
3ef0a25bf9 net: sctp: avoid incorrect time_t use
We want to avoid using time_t in the kernel because of the y2038
overflow problem. The use in sctp is not for storing seconds at
all, but instead uses microseconds and is passed as 32-bit
on all machines.

This patch changes the type to u32, which better fits the use.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: linux-sctp@vger.kernel.org
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05 03:16:48 -07:00
Viresh Kumar
b5ffe63442 net: Drop unlikely before IS_ERR(_OR_NULL)
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there
is no need to do that again from its callers. Drop it.

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-29 15:15:40 +02:00
Denys Vlasenko
2103d6b818 net: sctp: Don't use 64 kilobyte lookup table for four elements
Seemingly innocuous sctp_trans_state_to_prio_map[] array
is way bigger than it looks, since
"[SCTP_UNKNOWN] = 2" expands into "[0xffff] = 2" !

This patch replaces it with switch() statement.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Neil Horman <nhorman@tuxdriver.com>
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: linux-sctp@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28 22:52:21 -07:00
Karl Heiss
635682a144 sctp: Prevent soft lockup when sctp_accept() is called during a timeout event
A case can occur when sctp_accept() is called by the user during
a heartbeat timeout event after the 4-way handshake.  Since
sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the
bh_sock_lock in sctp_generate_heartbeat_event() will be taken with
the listening socket but released with the new association socket.
The result is a deadlock on any future attempts to take the listening
socket lock.

Note that this race can occur with other SCTP timeouts that take
the bh_lock_sock() in the event sctp_accept() is called.

 BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0]
 ...
 RIP: 0010:[<ffffffff8152d48e>]  [<ffffffff8152d48e>] _spin_lock+0x1e/0x30
 RSP: 0018:ffff880028323b20  EFLAGS: 00000206
 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48
 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000
 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0
 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225
 FS:  0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
 CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0)
 Stack:
 ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000
 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00
 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8
 Call Trace:
 <IRQ>
 [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp]
 [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0
 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120
 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0
 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0
 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440
 [<ffffffff81497255>] ? ip_rcv+0x275/0x350
 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750
 ...

With lockdep debugging:

 =====================================
 [ BUG: bad unlock balance detected! ]
 -------------------------------------
 CslRx/12087 is trying to release lock (slock-AF_INET) at:
 [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp]
 but there are no more locks to release!

 other info that might help us debug this:
 2 locks held by CslRx/12087:
 #0:  (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0
 #1:  (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp]

Ensure the socket taken is also the same one that is released by
saving a copy of the socket before entering the timeout event
critical section.

Signed-off-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28 21:03:40 -07:00
Karl Heiss
f05940e618 sctp: Whitespace fix
Fix indentation in sctp_generate_heartbeat_event.

Signed-off-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28 21:03:40 -07:00
Marcelo Ricardo Leitner
8e2d61e0ae sctp: fix race on protocol/netns initialization
Consider sctp module is unloaded and is being requested because an user
is creating a sctp socket.

During initialization, sctp will add the new protocol type and then
initialize pernet subsys:

        status = sctp_v4_protosw_init();
        if (status)
                goto err_protosw_init;

        status = sctp_v6_protosw_init();
        if (status)
                goto err_v6_protosw_init;

        status = register_pernet_subsys(&sctp_net_ops);

The problem is that after those calls to sctp_v{4,6}_protosw_init(), it
is possible for userspace to create SCTP sockets like if the module is
already fully loaded. If that happens, one of the possible effects is
that we will have readers for net->sctp.local_addr_list list earlier
than expected and sctp_net_init() does not take precautions while
dealing with that list, leading to a potential panic but not limited to
that, as sctp_sock_init() will copy a bunch of blank/partially
initialized values from net->sctp.

The race happens like this:

     CPU 0                           |  CPU 1
  socket()                           |
   __sock_create                     | socket()
    inet_create                      |  __sock_create
     list_for_each_entry_rcu(        |
        answer, &inetsw[sock->type], |
        list) {                      |   inet_create
      /* no hits */                  |
     if (unlikely(err)) {            |
      ...                            |
      request_module()               |
      /* socket creation is blocked  |
       * the module is fully loaded  |
       */                            |
       sctp_init                     |
        sctp_v4_protosw_init         |
         inet_register_protosw       |
          list_add_rcu(&p->list,     |
                       last_perm);   |
                                     |  list_for_each_entry_rcu(
                                     |     answer, &inetsw[sock->type],
        sctp_v6_protosw_init         |     list) {
                                     |     /* hit, so assumes protocol
                                     |      * is already loaded
                                     |      */
                                     |  /* socket creation continues
                                     |   * before netns is initialized
                                     |   */
        register_pernet_subsys       |

Simply inverting the initialization order between
register_pernet_subsys() and sctp_v4_protosw_init() is not possible
because register_pernet_subsys() will create a control sctp socket, so
the protocol must be already visible by then. Deferring the socket
creation to a work-queue is not good specially because we loose the
ability to handle its errors.

So, as suggested by Vlad, the fix is to split netns initialization in
two moments: defaults and control socket, so that the defaults are
already loaded by when we register the protocol, while control socket
initialization is kept at the same moment it is today.

Fixes: 4db67e8086 ("sctp: Make the address lists per network namespace")
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-11 15:00:02 -07:00
Marcelo Ricardo Leitner
410f03831c sctp: add routing output fallback
Commit 0ca50d12fe added a restriction that the address must belong to
the output interface, so that sctp will use the right interface even
when using secondary addresses.

But it breaks IPVS setups, on which people is used to attach VIP
addresses to loopback interface on real servers. It's preferred to
attach to the interface actually in use, but it's a very common setup
and that used to work.

This patch then saves the first routing good result, even if it would be
going out through an interface that doesn't have that address. If no
better hit found, it's then used. This effectively restores the original
behavior if no better interface could be found.

Fixes: 0ca50d12fe ("sctp: fix src address selection if using secondary addresses")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-03 15:43:05 -07:00