Merge changes in the ACPI x86-specific code, ACPI fan driverm ACPI LPSS
(Intel SoC) driver and the ACPI CPPC library for 6.11-rc1:
- Switch the ACPI x86 utility code and the ACPI LPSS driver to new
Intel CPU model defines (Tony Luck).
- Add hwmon interface support to the ACPI fan driver (Armin Wolf).
- Add sysfs entry for guaranteed performance to the ACPI CPPC library
and replace a ternary operator with umax() in it (Petr Tesařík,
Prabhakar Pujeri).
* acpi-x86:
ACPI: x86: Switch to new Intel CPU model defines
* acpi-fan:
ACPI: fan: Add hwmon support
* acpi-soc:
ACPI: LPSS: Switch to new Intel CPU model defines
* acpi-cppc:
ACPI: CPPC: Replace ternary operator with umax()
ACPI: CPPC: add sysfs entry for guaranteed performance
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A Rembrandt-based HP thin client is reported to have problems where
the NVME disk isn't present after resume from s2idle.
This is because the NVME disk wasn't put into D3 at suspend, and
that happened because the StorageD3Enable _DSD was missing in the BIOS.
As AMD's architecture requires that the NVME is in D3 for s2idle, adjust
the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT
advertises low power idle support.
This will ensure that any future products with this BIOS deficiency don't
need to be added to the allow list of overrides.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge x86-specific ACPI updates, an ACPI DPTF driver update adding new
platform support to it, and an ACPI APEI update:
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko).
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko).
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede).
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan).
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar).
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König).
* acpi-x86:
ACPI: Move acpi_blacklisted() declaration to asm/acpi.h
ACPI: x86: Add PNP_UART1_SKIP quirk for Lenovo Blade2 tablets
ACPI: x86: utils: Mark SMO8810 accel on Dell XPS 15 9550 as always present
ACPI: x86: Move LPSS to x86 folder
ACPI: x86: Move blacklist to x86 folder
ACPI: x86: Move acpi_cmos_rtc to x86 folder
ACPI: x86: Introduce a Makefile
ACPI: LPSS: Remove nested ifdeffery for CONFIG_PM
ACPI: LPSS: Advertise number of chip selects via property
* acpi-dptf:
ACPI: DPTF: Add Lunar Lake support
* acpi-apei:
ACPI: APEI: EINJ: mark remove callback as __exit
Commit 073237281a ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT
UUID for non-AMD systems") attempted to avoid evaluating the same Low-
Power S0 Idle _DSM functions for different UUIDs, but that turns out to
be a mistake, because some systems in the field are adversely affected
by it.
Address this by allowing all Low-Power S0 Idle _DSM functions to be
evaluated, but still print the message regarding duplication of Low-
Power S0 Idle _DSM function sets for different UUIDs.
Fixes: 073237281a ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750
Reported-and-tested-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
The x86 Android tablets on which quirks to skip looking for a matching
UartSerialBus resource and instead unconditionally create a serial bus
device (serdev) are necessary there are 2 sorts of serialports:
ACPI enumerated highspeed designware UARTs, these are the ones which
typcially need to be skipped since they need a serdev for the attached
BT HCI.
A PNP enumerated UART which is part of the PCU. So far the existing
quirks have ignored this. But on the Lenovo Yoga Tablet 2 Pro 1380
models this is used for a custom fastcharging protocol. There is
a Micro USB switch which can switch the USB data lines to this uart
and then a 600 baud protocol is used to configure the charger for
a voltage higher then 5V.
Add a new ACPI_QUIRK_PNP_UART1_SKIP quirk type and set this for
the existing entry for the Lenovo Yoga Tablet 2 830 / 1050 models.
Note this will lead to unnecessarily also creating a serdev for
the PCU UART on the 830 / 1050 which don't need this, but the UART
is not used otherwise there so that is not a problem.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Dell XPS 15 9550 has a SMO8110 accelerometer /
HDD freefall sensor which is wrongly marked as not present.
Mark this as always present so that the dell-smo8800 driver
can bind to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
LPSS is built solely for x86, move it to the respective folder.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
blacklist is built solely for x86, move it to the respective folder.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_cmos_rtc is built solely for x86, move it to the respective folder.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There will be more modules coming here, so, introduce a separate
Makefile and include it in parent one via obj-$(CONFIG_X86).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge x86-specific ACPI changes, an ACPI backlight driver change, ACPI
APEI change and miscellaneous ACPI-related changes for 6.9-rc1:
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede).
- Make the ACPI backlight code handle fetching EDID that is longer than
256 bytes (Mario Limonciello).
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik).
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König).
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki).
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath).
* acpi-x86:
ACPI: x86: Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS
* acpi-video:
ACPI: video: Handle fetching EDID that is longer than 256 bytes
* acpi-apei:
ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
ACPI: APEI: GHES: Convert to platform remove callback returning void
* acpi-misc:
ACPI: pfr_update: Convert to platform remove callback returning void
ACPI: pfr_telemetry: Convert to platform remove callback returning void
ACPI: fan: Convert to platform remove callback returning void
ACPI: GED: Convert to platform remove callback returning void
ACPI: DPTF: Convert to platform remove callback returning void
ACPI: AGDI: Convert to platform remove callback returning void
ACPI: TAD: Convert to platform remove callback returning void
ACPI: Drop the custom_method debugfs interface
ACPI: use %pe for better readability of errors while printing
Some recent(ish) Dell AIO devices have a backlight controller board
connected to an UART.
This UART has a DELL0501 HID with CID set to PNP0501 so that the UART is
still handled by 8250_pnp.c. Unfortunately there is no separate ACPI device
with an UartSerialBusV2() resource to model the backlight-controller.
This causes the kernel to create a /dev/ttyS0 char-device for the UART
instead of creating an in kernel serdev-controller + serdev-device pair
for a kernel backlight driver.
Use the existing acpi_quirk_skip_serdev_enumeration() mechanism to work
around this by returning skip=true for tty-ctrl parents with a HID
of DELL0501.
Like other cases where the UartSerialBusV2() resource is missing or broken
this will only create the serdev-controller device and the serdev-device
itself will need to be instantiated by platform code.
Unfortunately in this case there is no device for the platform-code
instantiating the serdev-device to bind to. So also create
a platform_device for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some recent(ish) Dell AIO devices have a backlight controller board
connected to an UART.
This UART has a DELL0501 HID with CID set to PNP0501 so that the UART is
still handled by 8250_pnp.c. Unfortunately there is no separate ACPI device
with an UartSerialBusV2() resource to model the backlight-controller.
The next patch in this series will use acpi_quirk_skip_serdev_enumeration()
to still create a serdev for this for a backlight driver to bind to
instead of creating a /dev/ttyS0.
This new acpi_quirk_skip_serdev_enumeration() use is not limited to Android
X86 tablets, so move it out of the ifdef CONFIG_X86_ANDROID_TABLETS block.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Systems based on Intel platforms that use the MSFT UUID for Low-Power S0
Idle (LPS0) have started to ship, so allow the kernel to use the MSFT
UUID in the non-AMD case too, but in that case make it avoid evaluating
the same _DSM function for two different UUIDs and prioritize the MSFT
one.
While at it, combine two MSFT _DSM function mask checks in
acpi_s2idle_restore_early() so as to make it reflect the
acpi_s2idle_prepare_late() flow more closely and adjust the
Modern Standby entry and exit comments slightly.
Non-AMD systems that do not support MSFT UUID for Low-power S0 Idle are
not expected to be affected by this change in any way.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Merge ACPI EC driver updates, ACPI sysfs interface updates, misc updates
related to ACPI and changes related to ACPI _UID handling for 6.7-rc1:
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose).
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET).
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav).
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav).
* acpi-ec:
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
* acpi-sysfs:
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
* acpi-misc:
ACPI: x86: s2idle: Switch to use acpi_evaluate_dsm_typed()
ACPI: PCI: Switch to use acpi_evaluate_dsm_typed()
* acpi-uid:
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_evaluate_dsm_typed() provides a way to check the type of the
object evaluated by _DSM call. Use it instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge ACPI power management updates for 6.6-rc1:
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko).
* acpi-pm:
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
Other parts of the kernel may use LPS0 constraints information to make
decisions on what power state to put a device into.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Rewrite kerneldoc, rearrange if () statement, edit subject and
changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have one existing and one coming user of this macro.
Introduce a helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While parsing the constraints show all the entries for the table
to aid with debugging other problems later.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The constraints table should be resetting the `list` object
after running through all of `info_obj` iterations.
This adjusts whitespace as well as less code will now be included
with each loop. This fixes a functional problem is fixed where a
badly formed package in the inner loop may have incorrect data.
Fixes: 146f1ed852 ("ACPI: PM: s2idle: Add AMD support to handle _DSM")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE`
objects while evaluating the AMD LPS0 _DSM, there will be a memory
leak. Explicitly guard against this.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When code uses a pre-increment it makes the reader question "why".
In the constraint fetching code there is no reason for the variables
to be pre-incremented so adjust to post-increment.
No intended functional changes.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2a2a64714d ("ACPI: Disable MWAIT via DMI on broken Compal board")
introduced a workaround for MWAIT for a specific x86 system.
Move the code outside of acpi_processor.c to acpi/x86/ directory for
consistency and rename the functions associated with it, so their names
start with "acpi_proc_quirk_" to make the goal obvious.
No intentional functional impact.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, two function names changed ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter).
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui).
- Fix invalid initialization for pl4_supported field in the Intel RAPL
power capping driver (Sumeet Pawnikar).
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven).
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny).
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny).
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo).
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET).
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski).
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary).
-----BEGIN PGP SIGNATURE-----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=SZV7
-----END PGP SIGNATURE-----
Merge tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add Intel TPMI (Topology Aware Register and PM Capsule
Interface) support to the power capping subsystem, extend the
intel_idle driver to work in VM guests where MWAIT is not available,
extend the system-wide power management diagnostics, fix bugs and
clean up code.
Specifics:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter)
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui)
- Fix invalid initialization for pl4_supported field in the Intel
RAPL power capping driver (Sumeet Pawnikar)
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven)
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny)
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny)
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo)
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng)
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui)
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann)
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello)
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson)
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich)
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET)
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski)
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary)"
* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
PM: domains: Move the verification of in-params from genpd_add_device()
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
intel_idle: Add support for using intel_idle in a VM guest using just hlt
cpufreq: Fail driver register if it has adjust_perf without fast_switch
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
...
Merge x86-related ACPI changes, backlight-related ACPI changes, an Intel
SoC (LPSS) ACPI driver update and a missing prototype warning fix
related to ACPI NFIT for 6.5-rc1:
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede).
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad X131e
(3371 AMD version) and Apple iMac11,3 and stop trying to use vendor
backlight control on relatively recent systems (Hans de Goede).
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede).
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann).
* acpi-x86:
ACPI: x86: Add ACPI_QUIRK_UART1_SKIP for Lenovo Yoga Book yb1-x90f/l
ACPI: button: Add lid disable DMI quirk for Nextbook Ares 8A
ACPI: x86: Add skip i2c clients quirk for Nextbook Ares 8A
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: video: Add backlight=native DMI quirk for Lenovo ThinkPad X131e (3371 AMD version)
ACPI: video: Add backlight=native DMI quirk for Apple iMac11,3
* acpi-soc:
ACPI: LPSS: Add pwm_lookup_table entry for second PWM on CHT/BSW devices
* acpi-tables:
ACPI: NFIT: Add declaration in a local header
Enabling debugging messages for the state requires turning on dynamic
debugging for the file. To make it more accessible, use
`pm_debug_messages` and clearer strings for what is happening.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In Windows the Microsoft _DSM doesn't call functions 3->5->7 for suspend
and 8->6->4 for resume like Linux currently does.
Rather it calls 3->7->5 for suspend and 6->8->4 for resume.
Align this calling order for Linux as well.
Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-states
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Yoga Book yb1-x90f/l 2-in-1 which ships with Android as
Factory OS has (another) bug in its DSDT where the UART resource for
the BTH0 ACPI device contains "\\_SB.PCIO.URT1" as path to the UART.
Note that is with a letter 'O' instead of the number '0' which is wrong.
This causes Linux to instantiate a standard /dev/ttyS? device for
the UART instead of a /sys/bus/serial device, which in turn causes
bluetooth to not work.
Similar DSDT bugs have been encountered before and to work around those
the acpi_quirk_skip_serdev_enumeration() helper exists.
Previous devices had the broken resource pointing to the first UART, while
the BT HCI was on the second UART, which ACPI_QUIRK_UART1_TTY_UART2_SKIP
deals with. Add a new ACPI_QUIRK_UART1_SKIP quirk for skipping enumeration
of UART1 instead for the Yoga Book case and add this quirk to the
existing DMI quirk table entry for the yb1-x90f/l .
This leaves the UART1 controller unbound allowing the x86-android-tablets
module to manually instantiate a serdev for it fixing bluetooth.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Nextbook Ares 8A is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there (the Android x86 kernel fork ignores I2C devices described
in the DSDT).
On this specific model this just not cause resource conflicts, one of
the probe() calls for the non existing i2c_clients actually ends up
toggling a GPIO or executing a _PS3 after a failed probe which turns
the tablet off.
Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to avoid the bogus i2c_clients and
to fix the tablet turning off during boot because of this.
Also add the "10EC5651" HID for the RealTek ALC5651 codec used
in this tablet to the list of HIDs for which not to skipi2c_client
instantiation, since the Intel SST sound driver relies on
the codec being instantiated through ACPI.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge an ACPI power management quirk and a change related to the
handling of ACPI device properties for 6.4-rc1:
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede).
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin).
* acpi-pm:
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
* acpi-properties:
ACPI: property: Support strings in Apple _DSM props
The Wi-Fi module in x86 Apple machines has a "module-instance" device
property that specifies the platform type and is used for firmware
selection. Its value is a string, so add support for string values in
acpi_extract_apple_properties().
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The LSM303D on the Lenovo Yoga Tablet 2 series is present
as both ACCL0001 and MAGN0001. As we can only ever register an
i2c client for one of them, ignore MAGN0001.
Currently this errors:
i2c i2c-4: Failed to register i2c client MAGN0001:00 at 0x1d (-16)
Tested on a Lenovo Yoga Tablet 2 1051-F.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Picasso was the first APU that introduced s2idle support from AMD,
and it was predating before vendors started to use `StorageD3Enable`
in their firmware.
Windows doesn't have problems with this hardware and NVME so it was
likely on the list of hardcoded CPUs to use this behavior in Windows.
Add it to the list for Linux to avoid NVME resume issues.
Reported-by: Stuart Axon <stuaxo2@yahoo.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2449
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Yoga Book X90 is a x86 tablet which ships with Android x86
as factory OS. The Android x86 kernel fork ignores I2C devices described
in the DSDT, except for the PMIC and Audio codecs.
As usual the Lenovo Yoga Book X90's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Book X90
to the acpi_quirk_skip_dmi_ids table to woraround this.
The DSDT also contains broken ACPI GPIO event handlers, disable those too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
The Acer Iconia One 7 B1-750 is a x86 tablet which ships with Android x86
as factory OS. The Android x86 kernel fork ignores I2C devices described
in the DSDT, except for the PMIC and Audio codecs.
As usual the Acer Iconia One 7 B1-750's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Acer Iconia One 7 B1-750
to the acpi_quirk_skip_dmi_ids table to woraround this.
The DSDT also contains broken ACPI GPIO event handlers, disable those too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
x86 ACPI boards which ship with only Android as their factory image usually
have pretty broken ACPI tables, relying on everything being hardcoded in
the factory kernel image and often disabling parts of the ACPI enumeration
kernel code to avoid the broken tables causing issues.
Part of this broken ACPI code is that sometimes these boards have _AEI
ACPI GPIO event handlers which are broken.
So far this has been dealt with in the platform/x86/x86-android-tablets.c
module, which contains various workarounds for these devices, by it calling
acpi_gpiochip_free_interrupts() on gpiochip-s with troublesome handlers to
disable the handlers.
But in some cases this is too late, if the handlers are of the edge type
then gpiolib-acpi.c's code will already have run them at boot.
This can cause issues such as GPIOs ending up as owned by "ACPI:OpRegion",
making them unavailable for drivers which actually need them.
Boards with these broken ACPI tables are already listed in
drivers/acpi/x86/utils.c for e.g. acpi_quirk_skip_i2c_client_enumeration().
Extend the quirks mechanism for a new acpi_quirk_skip_gpio_event_handlers()
helper, this re-uses the DMI-ids rather then having to duplicate the same
DMI table in gpiolib-acpi.c .
Also add the new ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS quirk to existing
boards with troublesome ACPI gpio event handlers, so that the current
acpi_gpiochip_free_interrupts() hack can be removed from
x86-android-tablets.c .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Merge additional ACPI quirks for x86 systems:
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello).
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello).
* acpi-pm:
ACPI: x86: Drop quirk for HP Elitebook
* acpi-x86:
ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
commit 018d6711c2 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
It was reported that several more Dell systems suffered the same symptoms.
As the list is continuing to grow but these are all Cezanne systems,
instead add Cezanne to the CPU list to apply the StorageD3Enable property
and remove the whole list.
It was also reported that an HP system only has StorageD3Enable on the ACPI
device for the first NVME disk, not the second.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773
Reported-by: David Alvarez Lombardi <dqalombardi@proton.me>
Reported-by: dbilios@stdio.gr
Reported-and-tested-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Tested-by: victor.bonnelle@proton.me
Tested-by: hurricanepootis@protonmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9
platforms to force AMD GUID codepath instead of Microsoft codepath.
This was due to a bug with WCN6855 WLAN firmware interaction with
the system.
This bug is fixed by WCN6855 firmware:
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Remove the quirk as it's no longer necessary with this firmware.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=c7a57ef688f7d99d8338a5d8edddc8836ff0e6de
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After we introduced a module parameter and quirk infrastructure for
picking the Microsoft GUID over the SOC vendor GUID we discovered
that lots and lots of systems are getting this wrong.
The table continues to grow, and is becoming unwieldy.
We don't really have any benefit to forcing vendors to populate the
AMD GUID. This is just extra work, and more and more vendors seem
to mess it up. As the Microsoft GUID is used by Windows as well,
it's very likely that it won't be messed up like this.
So drop all the quirks forcing it and the Rembrandt behavior. This
means that Cezanne or later effectively only run the Microsoft GUID
codepath with the exception of HP Elitebook 8*5 G9.
Fixes: fd894f05cf ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt")
Cc: stable@vger.kernel.org # 6.1
Reported-by: Benjamin Cheng <ben@bcheng.me>
Reported-by: bilkow@tutanota.com
Reported-by: Paul <paul@zogpog.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2292
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216768
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft
GUID with _REV 0. Both have very similar code but the AMD GUID
has a special workaround that is specific to a problem with
spurious wakeups on systems with Qualcomm WLAN.
This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't
affect any other WLAN H/W). If this WLAN firmware is fixed this
quirk can be dropped.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Medion Lifetab S10346 is a x86 tablet which ships with Android x86 as
factory OS. The Android x86 kernel fork ignores I2C devices described in
the DSDT, except for the PMIC and Audio codecs.
As usual the Medion Lifetab S10346's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Medion Lifetab S10346 to
the acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Yoga Tab 3 Pro (YT3-X90F) is a x86 (Cherry Trail) tablet which
ships with Android x86 as factory OS. The Android x86 kernel fork ignores
I2C devices described in the DSDT, except for the PMIC and Audio codecs.
As usual the Lenovo Yoga Tab 3 Pro's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Tab 3 Pro to
the acpi_quirk_skip_dmi_ids table to woraround this.
ACPI_QUIRK_SKIP_I2C_CLIENTS handling uses i2c_acpi_known_good_ids[],
so that PMICs and Audio codecs will still be enumerated properly.
The Lenovo Yoga Tab 3 Pro uses a Whiskey Cove PMIC, add the INT34D3 HID
for this PMIC to the i2c_acpi_known_good_ids[] list.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 018d6711c2 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
Julius Brockmann reports that Inspiron 16 5625 suffers that same symptoms.
Add this other system to the list as well.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Julius Brockmann <mail@juliusbrockmann.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
- Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
- Freezer:
- Rewrite the core freezer to behave better wrt thawing and be simpler
in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
all the fallout.
- Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
- Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmM/01cRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1geZA/+PB4KC1T9aVxzaTHI36R03YgJYZmIdtxw
wTf02MixePmz+gQCbepJbempGOh5ST28aOcI0xhdYOql5B63MaUBBMlB0HvGUyDG
IU3zETqLMRtAbnSTdQFv8m++ECUtZYp8/x1FCel4WO7ya4ETkRu1NRfCoUepEhpZ
aVAlae9LH3NBaF9t7s0PT2lTjf3pIzMFRkddJ0ywJhbFR3VnWat05fAK+J6fGY8+
LS54coefNlJD4oDh5TY8uniL1j5SmWmmwbk9Cdj7bLU5P3dFSS0/+5FJNHJPVGDE
srGT7wstRUcDrN0CnZo48VIUBiApJCCDqTfJYi9wNYd0NAHvwY6MIJJgEIY8mKsI
L/qH26H81Wt+ezSZ/5JIlGlZ/LIeNaa6OO/fbWEYABBQogvvx3nxsRNUYKSQzumH
CnSBasBjLnjWyLlK4qARM9cI7NFSEK6NUigrEx/7h8JFu/8T4DlSy6LsF1HUyKgq
4+FJLAqG6cL0tcwB/fHYd0oRESN8dStnQhGxSojgufwLc7dlFULvCYF5JM/dX+/V
IKwbOfIOeOn6ViMtSOXAEGdII+IQ2/ZFPwr+8Z5JC7NzvTVL6xlu/3JXkLZR3L7o
yaXTSaz06h1vil7Z+GRf7RHc+wUeGkEpXh5vnarGZKXivhFdWsBdROIJANK+xR0i
TeSLCxQxXlU=
=KjMD
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
Highlights:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we only
register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native
- s2idle: Add a new ->check() callback for platform_s2idle_ops
- video: Fix indentation of video_detect_dmi_table[] entries
- video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks
- video: Drop "Samsung X360" acpi_backlight=native quirk
- video: Remove acpi_video_set_dmi_backlight_type()
- video: Add Apple GMUX brightness control detection
- video: Add Nvidia WMI EC brightness control detection (v3)
- video: Refactor acpi_video_get_backlight_type() a bit
- video: Remove code to unregister acpi_video backlight when a native backlight registers
- video: Make backlight class device registration a separate step (v2)
- video: Simplify acpi_video_unregister_backlight()
- video: Remove acpi_video_bus from list before tearing it down
- video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()
- video: Add acpi_video_backlight_use_native() helper
acer-wmi:
- Move backlight DMI quirks to acpi/video_detect.c
- Acer Aspire One AOD270/Packard Bell Dot keymap fixes
apple-gmux:
- Stop calling acpi/video.h functions
asus-wmi:
- Expand support of GPU fan to read RPM and label
- Make kbd_rgb_mode_groups static
- Move acpi_backlight=native quirks to ACPI video_detect.c
- Move acpi_backlight=vendor quirks to ACPI video_detect.c
- Drop DMI chassis-type check from backlight handling
- Increase FAN_CURVE_BUF_LEN to 32
- Fix the name of the mic-mute LED classdev
- Implement TUF laptop keyboard power states
- Implement TUF laptop keyboard LED modes
- Support the GPU fan on TUF laptops
- Modify behaviour of Fn+F5 fan key
- Update tablet_mode_sw module-param help text
- Simplify tablet-mode-switch handling
- Simplify tablet-mode-switch probing
- Add support for ROG X13 tablet mode
- Adjust tablet/lidflip handling to use enum
- Support the hardware GPU MUX on some laptops
- Simplify some of the *_check_present() helpers
- Refactor panel_od attribute
- Refactor egpu_enable attribute
- Refactor disable_gpu attribute
- Document the panel_od sysfs attribute
- Document the egpu_enable sysfs attribute
- Document the dgpu_disable sysfs attribute
- Use kobj_to_dev()
- Convert all attr-show to use sysfs_emit
compal-laptop:
- Get rid of a few forward declarations
dell-privacy:
- convert to use dev_groups
dell-smbios-base:
- Use sysfs_emit()
dell-wmi:
- Add WMI event 0x0012 0x0003 to the list
docs:
- ABI: charge_control_end_threshold may not support all values
drivers/platform:
- toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models
drm/amdgpu:
- Register ACPI video backlight when skipping amdgpu backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/i915:
- Call acpi_video_register_backlight() (v3)
- Don't register backlight when another backlight should be used (v2)
drm/nouveau:
- Register ACPI video backlight when nv_backlight registration fails (v2)
- Don't register backlight when another backlight should be used (v2)
drm/radeon:
- Register ACPI video backlight when skipping radeon backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/todo:
- Add entry about dealing with brightness control on devices with > 1 panel
gpio-f7188x:
- use unique labels for banks/chips
- Add GPIO support for Nuvoton NCT6116
- add a prefix to macros to keep gpio namespace clean
- switch over to using pr_fmt
hp-wmi:
- Support touchpad on/off
- Setting thermal profile fails with 0x06
int3472/discrete:
- Drop a forward declaration
intel-uncore-freq:
- Use sysfs_emit() to instead of scnprintf()
intel_cht_int33fe:
- Fix comment according to the code flow
leds:
- simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table static
- simatic-ipc-leds-gpio: add new model 227G
move from strlcpy with unused retval to strscpy:
- move from strlcpy with unused retval to strscpy
msi-laptop:
- Change DMI match / alias strings to fix module autoloading
- Add msi_scm_disable_hw_fn_handling() helper
- Add msi_scm_model_exit() helper
- Fix resource cleanup
- Simplify ec_delay handling
- Fix old-ec check for backlight registering
- Drop MSI_DRIVER_VERSION
- Use MODULE_DEVICE_TABLE()
nvidia-wmi-ec-backlight:
- Use acpi_video_get_backlight_type()
- Move fw interface definitions to a header (v2)
p2sb:
- Fix UAF when caller uses resource name
platform/mellanox:
- mlxreg-lc: Make error handling flow consistent
- Remove redundant 'NULL' check
- Remove unnecessary code
- mlxreg-lc: Fix locking issue
- mlxreg-lc: Fix coverity warning
platform/surface:
- Split memcpy() of struct ssam_event flexible array
- aggregator_registry: Add HID devices for sensors and UCSI client to SP8
- aggregator_registry: Rename HID device nodes based on new findings
- aggregator_registry: Rename HID device nodes based on their function
- aggregator_registry: Add support for Surface Laptop Go 2
platform/x86:
- use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd:
- pmc: Dump idle mask during "check" stage instead
- pmc: remove CONFIG_DEBUG_FS checks
- pmc: Fix build without debugfs
- pmc: Add sysfs files for SMU
- pmc: Add an extra STB message for checking s2idle entry
- pmc: Always write to the STB
- pmc: Add defines for STB events
platform/x86/amd/pmf:
- Remove unused power_delta instances
- install notify handler after acpi init
- Add sysfs to toggle CnQF
- Add support for CnQF
- Fix clang unused variable warning
- Fix undefined reference to platform_profile
- Force load driver on older supported platforms
- Handle AMT and CQL events for Auto mode
- Add support for Auto mode feature
- Get performance metrics from PMFW
- Add fan control support
- Add heartbeat signal support
- Add debugfs information
- Add support SPS PMF feature
- Add support for PMF APCI layer
- Add support for PMF core layer
- Add ABI doc for AMD PMF
- Add AMD PMF driver entry
platform/x86/intel/wmi:
- thunderbolt: Use dev_groups callback
pmc_atom:
- Amend comment style and grammar
- Make terminator entry uniform
- Improve quirk message to be less cryptic
- Fix SLP_TYPx bitfield mask
samsung-laptop:
- Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c
simatic-ipc:
- add new model 427G
- enable watchdog for 227G
thinkpad_acpi:
- Explicitly set to balanced mode on startup
tools/power/x86/intel-speed-select:
- Release v1.13
- Optimize CPU initialization
- Utilize cpu_map to get physical id
- Remove unused struct clos_config fields
- Enforce isst_id value
- Do not export get_physical_id
- Introduce is_cpu_in_power_domain helper
- Cleanup get_physical_id usage
- Convert more function to use isst_id
- Add pkg and die in isst_id
- Introduce struct isst_id
- Remove unused core_mask array
- Remove dead code
- Fix cpu count for TDP level display
toshiba_acpi:
- change turn_on_panel_on_resume to static
- Remove duplicate include
- Set correct parent for input device.
- Add fan RPM reading (hwmon interface)
- Add fan RPM reading (internals)
- Stop using acpi_video_set_dmi_backlight_type()
- Fix ECO LED control on Toshiba Z830
- Battery charge mode in toshiba_acpi (internals)
- Battery charge mode in toshiba_acpi (sysfs)
wmi:
- Drop forward declaration of static functions
- Allow duplicate GUIDs for drivers that use struct wmi_driver
x86-android-tablets:
- Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmM9eLgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zIzAf+JG058wucK0Zsnu4POzGp+uHjnWuu
AJUmTeRvCD7MidwIv5PiwEtTucQ8OuXYR+tPc8LIwCVZtc05FBmh7Y8le/CX0SS6
n9EZIvCk3Owosti5w2TPnCK920kh+Wfxl/fmfDbpi6+lpAL8r+F/mZEGKGFdZpWu
Q+yM/eyxwPH8q8gjrXOUC7rN43aYeO3OCpNG3GYkQ/2S5qrjuz39dXhNVzdSsxm7
aYOqJRNjZQEjQ3kJcp65kC6oWp3UaI1zdpGwhBG/SY8BCtCYZzlRy7gN2FCJfAa/
EyYayOvdy0zNwewbIYzck4W80hUDtfidgZgZ9crQscO/JjbGi6LhveD4YA==
=afGw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
