Commit 326e1dbb57 ("block: remove management of bi_remaining when
restoring original bi_end_io") made bio_inc_remaining() private to bio.c
because the only use-case that made sense was confined to the
bio_chain() interface.
Since that time DM thinp went on to use bio_chain() in its relatively
complex implementation of async discard support. That implementation,
even when converted over to use the new async __blkdev_issue_discard()
interface, depends on deferred completion of the original discard bio --
which is most appropriately implemented using bio_inc_remaining().
DM thinp foolishly duplicated bio_inc_remaining(), local to dm-thin.c as
__bio_inc_remaining(), so re-exporting bio_inc_remaining() allows us to
put an end to that foolishness.
All said, bio_inc_remaining() should really only be used in conjunction
with bio_chain(). It isn't intended for generic bio reference counting.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 38f2525533 ("block: add __blkdev_issue_discard") incorrectly
disallowed the early return of -EOPNOTSUPP if the device doesn't support
discard (or secure discard). This early return of -EOPNOTSUPP has
always been part of blkdev_issue_discard() interface so there isn't a
good reason to break that behaviour -- especially when it can be easily
reinstated.
The nuance of allowing early return of -EOPNOTSUPP vs disallowing late
return of -EOPNOTSUPP is: if the overall device never advertised support
for discards and one is issued to the device it is beneficial to inform
the caller that discards are not supported via -EOPNOTSUPP. But if a
device advertises discard support it means that at least a subset of the
device does have discard support -- but it could be that discards issued
to some regions of a stacked device will not be supported. In that case
the late return of -EOPNOTSUPP must be disallowed.
Fixes: 38f2525533 ("block: add __blkdev_issue_discard")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_account_io_start does not need to be wrapped with blk_do_io_stat
ais it already checks for that condition.
Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This is a version of blkdev_issue_discard which doesn't wait for
the I/O to complete, but instead allows the caller to submit
the final bio and/or chain it to others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagig@grimberg.me>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It can be replaced with a combination of bio_chain and submit_bio_wait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagig@grimberg.me>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch fix spelling typos found in printk
within various part of the kernel sources.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull block fixes from Jens Axboe:
"A few fixes for the current series. This contains:
- Two fixes for NVMe:
One fixes a reset race that can be triggered by repeated
insert/removal of the module.
The other fixes an issue on some platforms, where we get probe
timeouts since legacy interrupts isn't working. This used not to
be a problem since we had the worker thread poll for completions,
but since that was killed off, it means those poor souls can't
successfully probe their NVMe device. Use a proper IRQ check and
probe (msi-x -> msi ->legacy), like most other drivers to work
around this. Both from Keith.
- A loop corruption issue with offset in iters, from Ming Lei.
- A fix for not having the partition stat per cpu ref count
initialized before sending out the KOBJ_ADD, which could cause user
space to access the counter prior to initialization. Also from
Ming Lei.
- A fix for using the wrong congestion state, from Kaixu Xia"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: loop: fix filesystem corruption in case of aio/dio
NVMe: Always use MSI/MSI-x interrupts
NVMe: Fix reset/remove race
writeback: fix the wrong congested state variable definition
block: partition: initialize percpuref before sending out KOBJ_ADD
Now that we converted everything to the newer block write cache
interface, kill off the queue flush_flags and queueable flush
entries.
Signed-off-by: Jens Axboe <axboe@fb.com>
We don't have any drivers left using it, so kill it off. Update
documentation to use the newer blk_queue_write_cache().
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add an internal helper and flag for setting whether a queue has
write back caching, or write through (or none). Add a sysfs file
to show this as well, and make it changeable from user space.
This will replace the (awkward) blk_queue_flush() interface that
drivers currently use to inform the block layer of write cache state
and capabilities.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
No caller outside the blk-mq code so we can settle
with it static.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Its useful to iterate on all the active tags in cases
where we will need to fail all the queues IO.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
[hch: carefully check for valid tagsets]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
We could kmalloc() the payload, so need the offset in page.
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The initialization of partition's percpu_ref should have been done before
sending out KOBJ_ADD uevent, which may cause userspace to read partition
table. So the uninitialized percpu_ref may be accessed in data path.
This patch fixes this issue reported by Naveen.
Reported-by: Naveen Kaje <nkaje@codeaurora.org>
Tested-by: Naveen Kaje <nkaje@codeaurora.org>
Fixes: 6c71013ecb7e2(block: partition: convert percpu ref)
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block fixes from Jens Axboe:
"Final round of fixes for this merge window - some of this has come up
after the initial pull request, and some of it was put in a post-merge
branch before the merge window.
This contains:
- Fix for a bad check for an error on dma mapping in the mtip32xx
driver, from Alexey Khoroshilov.
- A set of fixes for lightnvm, from Javier, Matias, and Wenwei.
- An NVMe completion record corruption fix from Marta, ensuring that
we read things in the right order.
- Two writeback fixes from Tejun, marked for stable@ as well.
- A blk-mq sw queue iterator fix from Thomas, fixing an oops for
sparse CPU maps. They hit this in the hot plug/unplug rework"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: avoid cqe corruption when update at the same time as read
writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode
writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list()
blk-mq: Use proper cpumask iterator
mtip32xx: fix checks for dma mapping errors
lightnvm: do not load L2P table if not supported
lightnvm: do not reserve lun on l2p loading
nvme: lightnvm: return ppa completion status
lightnvm: add a bitmap of luns
lightnvm: specify target's logical address area
null_blk: add lightnvm null_blk device to the nullb_list
queue_for_each_ctx() iterates over per_cpu variables under the assumption that
the possible cpu mask cannot have holes. That's wrong as all cpumasks can have
holes. In case there are holes the iteration ends up accessing uninitialized
memory and crashing as a result.
Replace the macro by a proper for_each_possible_cpu() loop and drop the unused
macro blk_ctx_sum() which references queue_for_each_ctx().
Reported-by: Xiong Zhou <jencce.kernel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull libata updates from Tejun Heo:
- ahci grew runtime power management support so that the controller can
be turned off if no devices are attached.
- sata_via isn't dead yet. It got hotplug support and more refined
workaround for certain WD drives.
- Misc cleanups. There's a merge from for-4.5-fixes to avoid confusing
conflicts in ahci PCI ID table.
* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: ahci_xgene: dereferencing uninitialized pointer in probe
AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs
ata: sata_rcar: Use ARCH_RENESAS
sata_via: Implement hotplug for VT6421
sata_via: Apply WD workaround only when needed on VT6421
ahci: Add runtime PM support for the host controller
ahci: Add functions to manage runtime PM of AHCI ports
ahci: Convert driver to use modern PM hooks
ahci: Cache host controller version
scsi: Drop runtime PM usage count after host is added
scsi: Set request queue runtime PM status back to active on resume
block: Add blk_set_runtime_active()
ata: ahci_mvebu: add support for Armada 3700 variant
libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
libata: support AHCI on OCTEON platform
Pull core block updates from Jens Axboe:
"Here are the core block changes for this merge window. Not a lot of
exciting stuff going on in this round, most of the changes have been
on the driver side of things. That pull request is coming next. This
pull request contains:
- A set of fixes for chained bio handling from Christoph.
- A tag bounds check for blk-mq from Hannes, ensuring that we don't
do something stupid if a device reports an invalid tag value.
- A set of fixes/updates for the CFQ IO scheduler from Jan Kara.
- A set of blk-mq fixes from Keith, adding support for dynamic
hardware queues, and fixing init of max_dev_sectors for stacking
devices.
- A fix for the dynamic hw context from Ming.
- Enabling of cgroup writeback support on a block device, from
Shaohua"
* 'for-4.6/core' of git://git.kernel.dk/linux-block:
blk-mq: add bounds check on tag-to-rq conversion
block: bio_remaining_done() isn't unlikely
block: cleanup bio_endio
block: factor out chained bio completion
block: don't unecessarily clobber bi_error for chained bios
block-dev: enable writeback cgroup support
blk-mq: Fix NULL pointer updating nr_requests
blk-mq: mark request queue as mq asap
block: Initialize max_dev_sectors to 0
blk-mq: dynamic h/w context count
cfq-iosched: Allow parent cgroup to preempt its child
cfq-iosched: Allow sync noidle workloads to preempt each other
cfq-iosched: Reorder checks in cfq_should_preempt()
cfq-iosched: Don't group_idle if cfqq has big thinktime
(dm-mq) that is used exclussively by DM multipath.
- A stable fix for dm-mq that eliminates excessive context switching
offers the biggest performance improvement (for both IOPs and
throughput).
- But more work is needed, during the next cycle, to reduce spinlock
contention in DM multipath on large NUMA systems.
- A stable fix for a NULL pointer seen when DM stats is enabled on a DM
multipath device that must requeue an IO due to path failure.
- A stable fix for DM snapshot to disallow the COW and origin devices
from being identical. This amounts to graceful failure in the face of
userspace error because these devices shouldn't ever be identical.
- Stable fixes for DM cache and DM thin provisioning to address crashes
seen if/when their respective metadata device experiences failures
that cause the transition to 'fail_io' mode.
- The DM cache 'mq' policy is now an alias for the 'smq' policy. The
'smq' policy proved to be consistently better than 'mq'. As such
'mq', with all its complex user-facing tunables, has been eliminated.
- Improve DM thin provisioning to consistently return -ENOSPC once the
thin-pool's data volume is out of space.
- Improve DM core to properly handle error propagation if
bio_integrity_clone() fails in clone_bio().
- Other small cleanups and improvements to DM core.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6WRhAAoJEMUj8QotnQNaXiIH/3UBJ0w/YUrAOcTU9Q58FQoo
JophkKbjZ7o9IUNdDmfv9vQSFAJvDOJ8ve2Sb5OXdW0mUWxM+8M+6ioQU4MtI9oN
uBZ7MDYU995jzE89d8sYFO9lKrNCmmPKuBiIzoAGNVh1VPx8YK1PvTOfaGEk5VHg
Ay5JYGn14PUuV9tOP4euvpuc4XrJn5lqWtnTeMZPLtytcO3LWDIFGDoPoUqoRLI3
yzBO08xzR/xTNiW4+f59U7AJE+80CAONld0EDPRhrbd9kl3d1EcyCULisBQzuVd3
VSL0t77x4tPLWFR7Z1Fsq1FamuwSAUYL1FLLusT6G+5LUXdv0TAm+kXiUDA1Tbc=
=1SLF
-----END PGP SIGNATURE-----
Merge tag 'dm-4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Most attention this cycle went to optimizing blk-mq request-based DM
(dm-mq) that is used exclussively by DM multipath:
- A stable fix for dm-mq that eliminates excessive context
switching offers the biggest performance improvement (for both
IOPs and throughput).
- But more work is needed, during the next cycle, to reduce
spinlock contention in DM multipath on large NUMA systems.
- A stable fix for a NULL pointer seen when DM stats is enabled on a DM
multipath device that must requeue an IO due to path failure.
- A stable fix for DM snapshot to disallow the COW and origin devices
from being identical. This amounts to graceful failure in the face
of userspace error because these devices shouldn't ever be identical.
- Stable fixes for DM cache and DM thin provisioning to address crashes
seen if/when their respective metadata device experiences failures
that cause the transition to 'fail_io' mode.
- The DM cache 'mq' policy is now an alias for the 'smq' policy. The
'smq' policy proved to be consistently better than 'mq'. As such
'mq', with all its complex user-facing tunables, has been eliminated.
- Improve DM thin provisioning to consistently return -ENOSPC once the
thin-pool's data volume is out of space.
- Improve DM core to properly handle error propagation if
bio_integrity_clone() fails in clone_bio().
- Other small cleanups and improvements to DM core.
* tag 'dm-4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (41 commits)
dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()
dm thin: consistently return -ENOSPC if pool has run out of data space
dm cache: bump the target version
dm cache: make sure every metadata function checks fail_io
dm: add missing newline between DM_DEBUG_BLOCK_STACK_TRACING and DM_BUFIO
dm cache policy smq: clarify that mq registration failure was for 'mq'
dm: return error if bio_integrity_clone() fails in clone_bio()
dm thin metadata: don't issue prefetches if a transaction abort has failed
dm snapshot: disallow the COW and origin devices from being identical
dm cache: make the 'mq' policy an alias for 'smq'
dm: drop unnecessary assignment of md->queue
dm: reorder 'struct mapped_device' members to fix alignment and holes
dm: remove dummy definition of 'struct dm_table'
dm: add 'dm_numa_node' module parameter
dm thin metadata: remove needless newline from subtree_dec() DMERR message
dm mpath: cleanup reinstate_path() et al based on code review
dm mpath: remove __pgpath_busy forward declaration, rename to pgpath_busy
dm mpath: switch from 'unsigned' to 'bool' for flags where appropriate
dm round robin: use percpu 'repeat_count' and 'current_path'
dm path selector: remove 'repeat_count' return from .select_path hook
...
This patch has been carried in the Android tree for quite some time and
is one of the few patches required to get a mainline kernel up and
running with an exsiting Android userspace. So I wanted to submit it
for review and consideration if it should be merged.
For partitions, add new uevent parameters 'PARTN' which specifies the
partitions index in the table, and 'PARTNAME', which specifies PARTNAME
specifices the partition name of a partition device.
Android's userspace uses this for creating device node links from the
partition name and number, ie:
/dev/block/platform/soc/by-name/system
or
/dev/block/platform/soc/by-num/p1
One can see its usage here:
https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#355
and
https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#494
[john.stultz@linaro.org: dropped NPARTS and reworded commit message for context]
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Rom Lemarchand <romlem@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: <harald@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to check for a valid index before accessing the array
element to avoid accessing invalid memory regions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Modified by Jens to drop the unlikely(), and make the fall through
path be having a valid tag.
Signed-off-by: Jens Axboe <axboe@fb.com>
We use bio chaining during most I/Os these days due to the delayed
bio splitting. Additionally XFS will start using it, and there is
a pending direct I/O rewrite also making heavy use for it. Don't
pretend it's always unlikely, and let the branch predictor do it's
job instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Replace the while loop that unecessarily checks for a NULL bio in the fast
path with a simple goto loop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Factor common code between bio_chain_endio and bio_endio into a common
helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Only overwrite the parents bi_error if it was zero. That way a successful
bio completion doesn't reset the error pointer.
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
A h/w context's tags are freed if it was not assigned a CPU. Check if
the context has tags before updating the depth.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch adds support for larger requests in blk_rq_map_user_iov by
allowing it to build multiple bios for a request. This functionality
used to exist for the non-vectored blk_rq_map_user in the past, and
this patch reuses the existing functionality for it on the unmap side,
which stuck around. Thanks to the iov_iter API supporting multiple
bios is fairly trivial, as we can just iterate the iov until we've
consumed the whole iov_iter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jeff Lien <Jeff.Lien@hgst.com>
Tested-by: Jeff Lien <Jeff.Lien@hgst.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch applies the two introduced helpers to
figure out the 1st and last bvec.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The recent *sync enabling discovered that we are inserting into the
block_device pagecache counter to the expectations of the dirty data
tracking for dax mappings. This can lead to data corruption.
We want to support DAX for block devices eventually, but it requires
wider changes to properly manage the pagecache.
dump_stack+0x85/0xc2
dax_writeback_mapping_range+0x60/0xe0
blkdev_writepages+0x3f/0x50
do_writepages+0x21/0x30
__filemap_fdatawrite_range+0xc6/0x100
filemap_write_and_wait+0x4a/0xa0
set_blocksize+0x70/0xd0
sb_set_blocksize+0x1d/0x50
ext4_fill_super+0x75b/0x3360
mount_bdev+0x180/0x1b0
ext4_mount+0x15/0x20
mount_fs+0x38/0x170
Mark the support broken so its disabled by default, but otherwise still
available for testing.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower
than if an underlying null_blk device were used directly. One of the
reasons for this drop in performance is that blk_insert_clone_request()
was calling blk_mq_insert_request() with @async=true. This forced the
use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues
which ushered in ping-ponging between process context (fio in this case)
and kblockd's kworker to submit the cloned request. The ftrace
function_graph tracer showed:
kworker-2013 => fio-12190
fio-12190 => kworker-2013
...
kworker-2013 => fio-12190
fio-12190 => kworker-2013
...
Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to
_not_ use kblockd to submit the cloned requests isn't enough to
eliminate the observed context switches.
In addition to this dm-mq specific blk-core fix, there are 2 DM core
fixes to dm-mq that (when paired with the blk-core fix) completely
eliminate the observed context switching:
1) don't blk_mq_run_hw_queues in blk-mq request completion
Motivated by desire to reduce overhead of dm-mq, punting to kblockd
just increases context switches.
In my testing against a really fast null_blk device there was no benefit
to running blk_mq_run_hw_queues() on completion (and no other blk-mq
driver does this). So hopefully this change doesn't induce the need for
yet another revert like commit 621739b00e !
2) use blk_mq_complete_request() in dm_complete_request()
blk_complete_request() doesn't offer the traditional q->mq_ops vs
.request_fn branching pattern that other historic block interfaces
do (e.g. blk_get_request). Using blk_mq_complete_request() for
blk-mq requests is important for performance. It should be noted
that, like blk_complete_request(), blk_mq_complete_request() doesn't
natively handle partial completions -- but the request-based
DM-multipath target does provide the required partial completion
support by dm.c:end_clone_bio() triggering requeueing of the request
via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE.
dm-mq fix#2 is _much_ more important than #1 for eliminating the
context switches.
Before: cpu : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475
After: cpu : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472
With these changes multithreaded async read IOPs improved from ~950K
to ~1350K for this dm-mq stacked on null_blk test-case. The raw read
IOPs of the underlying null_blk device for the same workload is ~1950K.
Fixes: 7fb4898e0 ("block: add blk-mq support to blk_insert_cloned_request()")
Fixes: bfebd1cdb ("dm: add full blk-mq support to request-based DM")
Cc: stable@vger.kernel.org # 4.1+
Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
If block device is left runtime suspended during system suspend, resume
hook of the driver typically corrects runtime PM status of the device back
to "active" after it is resumed. However, this is not enough as queue's
runtime PM status is still "suspended". As long as it is in this state
blk_pm_peek_request() returns NULL and thus prevents new requests to be
processed.
Add new function blk_set_runtime_active() that can be used to force the
queue status back to "active" as needed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull block fixes from Jens Axboe:
"A collection of fixes from the past few weeks that should go into 4.5.
This contains:
- Overflow fix for sysfs discard show function from Alan.
- A stacking limit init fix for max_dev_sectors, so we don't end up
artificially capping some use cases. From Keith.
- Have blk-mq proper end unstarted requests on a dying queue, instead
of pushing that to the driver. From Keith.
- NVMe:
- Update to Kconfig description for NVME_SCSI, since it was
vague and having it on is important for some SUSE distros.
From Christoph.
- Set of fixes from Keith, around surprise removal. Also kills
the no-merge flag, so it supports merging.
- Set of fixes for lightnvm from Matias, Javier, and Wenwei.
- Fix null_blk oops when asked for lightnvm, but not available. From
Matias.
- Copy-to-user EINTR fix from Hannes, fixing a case where SG_IO fails
if interrupted by a signal.
- Two floppy fixes from Jiri, fixing signal handling and blocking
open.
- A use-after-free fix for O_DIRECT, from Mike Krinkin.
- A block module ref count fix from Roman Pen.
- An fs IO wait accounting fix for O_DSYNC from Stephane Gasparini.
- Smaller reallo fix for xen-blkfront from Bob Liu.
- Removal of an unused struct member in the deadline IO scheduler,
from Tahsin.
- Also from Tahsin, properly initialize inode struct members
associated with cgroup writeback, if enabled.
- From Tejun, ensure that we keep the superblock pinned during cgroup
writeback"
* 'for-linus' of git://git.kernel.dk/linux-block: (25 commits)
blk: fix overflow in queue_discard_max_hw_show
writeback: initialize inode members that track writeback history
writeback: keep superblock pinned during cgroup writeback association switches
bio: return EINTR if copying to user space got interrupted
NVMe: Rate limit nvme IO warnings
NVMe: Poll device while still active during remove
NVMe: Requeue requests on suspended queues
NVMe: Allow request merges
NVMe: Fix io incapable return values
blk-mq: End unstarted requests on dying queue
block: Initialize max_dev_sectors to 0
null_blk: oops when initializing without lightnvm
block: fix module reference leak on put_disk() call for cgroups throttle
nvme: fix Kconfig description for BLK_DEV_NVME_SCSI
kernel/fs: fix I/O wait not accounted for RW O_DSYNC
floppy: refactor open() flags handling
lightnvm: allow to force mm initialization
lightnvm: check overflow and correct mlc pairs
lightnvm: fix request intersection locking in rrpc
lightnvm: warn if irqs are disabled in lock laddr
...
We get this right for queue_discard_max_show but not max_hw_show. Follow the
same pattern as queue_discard_max_show instead so that we don't truncate.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently q->mq_ops is used widely to decide if the queue
is mq or not, so we should set the 'flag' asap so that both
block core and drivers can get the correct mq info.
For example, commit 868f2f0b720(blk-mq: dynamic h/w context count)
moves the hctx's initialization before setting q->mq_ops in
blk_mq_init_allocated_queue(), then cause blk_alloc_flush_queue()
to think the queue is non-mq and don't allocate command size
for the per-hctx flush rq.
This patches should fix the problem reported by Sasha.
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Fixes: 868f2f0b72 ("blk-mq: dynamic h/w context count")
Signed-off-by: Jens Axboe <axboe@fb.com>
A set of seven fixes. Two regressions in the new hisi_sas arm driver, a
blacklist entry for the marvell console which was causing a reset cascade
without it, a race fix in the WRITE_SAME/DISCARD routines, a retry fix for the
rdac driver, without which, it would prematurely return EIO and a couple of
fixes for the hyper-v storvsc driver.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJWvXAcAAoJEDeqqVYsXL0MAdkIAMC3LDF4tnfkgDmgl/vHAJTH
q7UEOGzMv3XubgZXQRr190eWwCkpo0D0eQBqLIwV6AYMCdauTZ/kZ9Nd3ENn4+F1
qZa+YU1vYstIS6hJkt/byZojH7bht/ueaiqxXxz21T6kNrQJt44pn2jFfUQeZoMg
x5A16cUNdIl5H7F37qaerP/A4dNzFYGcdBJZoJZi90L7V9tzOBoaau1FdvtjFg9o
V4N92JTpm0/I02h9znXhwoHpinREg705rB7duKHUQ82F8hBZvuXkPVibXD/xhjuy
CXavuF1xeb/xjFh4X3a58SNRuxDuo6b8vYb8W6J0yi9j9O1iBe8XEIxgMRR6OJE=
=i5+x
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of seven fixes:
Two regressions in the new hisi_sas arm driver, a blacklist entry for
the marvell console which was causing a reset cascade without it, a
race fix in the WRITE_SAME/DISCARD routines, a retry fix for the rdac
driver, without which, it would prematurely return EIO and a couple of
fixes for the hyper-v storvsc driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled
SCSI: Add Marvell Console to VPD blacklist
scsi_dh_rdac: always retry MODE SELECT on command lock violation
storvsc: Use the specified target ID in device lookup
storvsc: Install the storvsc specific timeout handler for FC devices
hisi_sas: fix v1 hw check for slot error
hisi_sas: add dependency for HAS_IOMEM
Commit 35dc248383 introduced a check for
current->mm to see if we have a user space context and only copies data
if we do. Now if an IO gets interrupted by a signal data isn't copied
into user space any more (as we don't have a user space context) but
user space isn't notified about it.
This patch modifies the behaviour to return -EINTR from bio_uncopy_user()
to notify userland that a signal has interrupted the syscall, otherwise
it could lead to a situation where the caller may get a buffer with
no data returned.
This can be reproduced by issuing SG_IO ioctl()s in one thread while
constantly sending signals to it.
Fixes: 35dc248 [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org # v.3.11+
Signed-off-by: Jens Axboe <axboe@fb.com>
Go directly to ending a request if it wasn't started. Previously, completing a
request may invoke a driver callback for a request it didn't initialize.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn at suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The new queue limit is not used by the majority of block drivers, and
should be initialized to 0 for the driver's requested settings to be used.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The new queue limit is not used by the majority of block drivers, and
should be initialized to 0 for the driver's requested settings to be used.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The hardware's provided queue count may change at runtime with resource
provisioning. This patch allows a block driver to alter the number of
h/w queues available when its resource count changes.
The main part is a new blk-mq API to request a new number of h/w queues
for a given live tag set. The new API freezes all queues using that set,
then adjusts the allocated count prior to remapping these to CPUs.
The bulk of the rest just shifts where h/w contexts and all their
artifacts are allocated and freed.
The number of max h/w contexts is capped to the number of possible cpus
since there is no use for more than that. As such, all pre-allocated
memory for pointers need to account for the max possible rather than
the initial number of queues.
A side effect of this is that the blk-mq will proceed successfully as
long as it can allocate at least one h/w context. Previously it would
fail request queue initialization if less than the requested number
was allocated.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
get_disk(),get_gendisk() calls have non explicit side effect: they
increase the reference on the disk owner module.
The following is the correct sequence how to get a disk reference and
to put it:
disk = get_gendisk(...);
/* use disk */
owner = disk->fops->owner;
put_disk(disk);
module_put(owner);
fs/block_dev.c is aware of this required module_put() call, but f.e.
blkg_conf_finish(), which is located in block/blk-cgroup.c, does not put
a module reference. To see a leakage in action cgroups throttle config
can be used. In the following script I'm removing throttle for /dev/ram0
(actually this is NOP, because throttle was never set for this device):
# lsmod | grep brd
brd 5175 0
# i=100; while [ $i -gt 0 ]; do echo "1:0 0" > \
/sys/fs/cgroup/blkio/blkio.throttle.read_bps_device; i=$(($i - 1)); \
done
# lsmod | grep brd
brd 5175 100
Now brd module has 100 references.
The issue is fixed by calling module_put() just right away put_disk().
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Gi-Oh Kim <gi-oh.kim@profitbricks.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
When a process is doing Random Write with O_DSYNC flag
the I/O wait are not accounted in the kernel (get_cpu_iowait_time_us).
This is preventing the governor or the cpufreq driver to account for
I/O wait and thus use the right pstate
Signed-off-by: Stephane Gasparini <stephane.gasparini@linux.intel.com>
Signed-off-by: Philippe Longepe <philippe.longepe@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a storage device rejects a WRITE SAME command we will disable write
same functionality for the device and return -EREMOTEIO to the block
layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or
failing the path.
Yiwen Jiang discovered a small race where WRITE SAME requests issued
simultaneously would cause -EIO to be returned. This happened because
any requests being prepared after WRITE SAME had been disabled for the
device caused us to return BLKPREP_KILL. The latter caused the block
layer to return -EIO upon completion.
To overcome this we introduce BLKPREP_INVALID which indicates that this
is an invalid request for the device. blk_peek_request() is modified to
return -EREMOTEIO in that case.
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Suggested-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently we don't allow sync workload of one cgroup to preempt sync
workload of any other cgroup. This is because we want to achieve service
separation between cgroups. However in cases where cgroup preempting is
ancestor of the current cgroup, there is no need of separation and
idling introduces unnecessary overhead. This hurts for example the case
when workload is isolated within a cgroup but journalling threads are in
root cgroup. Simple way to demostrate the issue is using:
dbench4 -c /usr/share/dbench4/client.txt -t 10 -D /mnt 1
on ext4 filesystem on plain SATA drive (mounted with barrier=0 to make
difference more visible). When all processes are in the root cgroup,
reported throughput is 153.132 MB/sec. When dbench process gets its own
blkio cgroup, reported throughput drops to 26.1006 MB/sec.
Fix the problem by making check in cfq_should_preempt() more benevolent
and allow preemption by ancestor cgroup. This improves the throughput
reported by dbench4 to 48.9106 MB/sec.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The original idea with preemption of sync noidle queues (introduced in
commit 718eee0579 "cfq-iosched: fairness for sync no-idle queues") was
that we service all sync noidle queues together, we don't idle on any of
the queues individually and we idle only if there is no sync noidle
queue to be served. This intention also matches the original test:
if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD
&& new_cfqq->service_tree == cfqq->service_tree)
return true;
However since at that time cfqq->service_tree was not set for idling
queues, this test was unreliable and was replaced in commit e4a229196a
"cfq-iosched: fix no-idle preemption logic" by:
if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD &&
cfqq_type(new_cfqq) == SYNC_NOIDLE_WORKLOAD &&
new_cfqq->service_tree->count == 1)
return true;
That was a reliable test but was actually doing something different -
now we preempt sync noidle queue only if the new queue is the only one
busy in the service tree.
These days cfq queue is kept in service tree even if it is idling and
thus the original check would be safe again. But since we actually check
that cfq queues are in the same cgroup, of the same priority class and
workload type (sync noidle), we know that new_cfqq is fine to preempt
cfqq. So just remove the service tree check.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Move check for preemption by rt class up. There is no functional change
but it makes arguing about conditions simpler since we can be sure both
cfq queues are from the same ioprio class.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
There is no point in idling on a cfq group if the only cfq queue that is
there has too big thinktime.
Signed-off-by: Jan Kara <jack@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull libnvdimm fixes from Dan Williams:
"1/ Fixes to the libnvdimm 'pfn' device that establishes a reserved
area for storing a struct page array.
2/ Fixes for dax operations on a raw block device to prevent pagecache
collisions with dax mappings.
3/ A fix for pfn_t usage in vm_insert_mixed that lead to a null
pointer de-reference.
These have received build success notification from the kbuild robot
across 153 configs and pass the latest ndctl tests"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
phys_to_pfn_t: use phys_addr_t
mm: fix pfn_t to page conversion in vm_insert_mixed
block: use DAX for partition table reads
block: revert runtime dax control of the raw block device
fs, block: force direct-I/O for dax-enabled block devices
devm_memremap_pages: fix vmem_altmap lifetime + alignment handling
libnvdimm, pfn: fix restoring memmap location
libnvdimm: fix mode determination for e820 devices
Avoid populating pagecache when the block device is in DAX mode.
Otherwise these page cache entries collide with the fsync/msync
implementation and break data durability guarantees.
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dynamically enabling DAX requires that the page cache first be flushed
and invalidated. This must occur atomically with the change of DAX mode
otherwise we confuse the fsync/msync tracking and violate data
durability guarantees. Eliminate the possibilty of DAX-disabled to
DAX-enabled transitions for now and revisit this for the next cycle.
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull block layer fix from Jens Axboe:
"This just contains the fix for the split issue that we had in -rc1.
It's been well tested at this point, so let's get it in mainline so we
don't have the same split issue for -rc2"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix bio splitting on max sectors
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed through the
RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to dependencies,
acknowledged by Bruce)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5oO7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Initial roundup of 4.5 merge window patches
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed
through the RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to
dependencies, acknowledged by Bruce)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
IB/mlx5: Unify CQ create flags check
IB/mlx5: Expose Raw Packet QP to user space consumers
{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
IB/mlx5: Add Raw Packet QP query functionality
IB/mlx5: Add create and destroy functionality for Raw Packet QP
IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
IB/mlx5: Allocate a Transport Domain for each ucontext
net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
net/mlx5_core: Add RQ and SQ event handling
net/mlx5_core: Export transport objects
IB/mlx5: Expose CQE version to user-space
IB/mlx5: Add CQE version 1 support to user QPs and SRQs
IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
IB/sa: Fix netlink local service GFP crash
IB/srpt: Remove redundant wc array
IB/qib: Improve ipoib UD performance
IB/mlx4: Advertise RoCE v2 support
IB/mlx4: Create and use another QP1 for RoCEv2
IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
...
After commit e36f62042880(block: split bios to maxpossible length),
bio can be splitted in the middle of a vector entry, then it
is easy to split out one bio which size isn't aligned with block
size, especially when the block size is bigger than 512.
This patch fixes the issue by making the max io size aligned
to logical block size.
Fixes: e36f62042880(block: split bios to maxpossible length)
Reported-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull NVMe updates from Jens Axboe:
"Last branch for this series is the nvme changes. It's in a separate
branch to avoid splitting too much between core and NVMe changes,
since NVMe is still helping drive some blk-mq changes. That said, not
a huge amount of core changes in here. The grunt of the work is the
continued split of the code"
* 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits)
uapi: update install list after nvme.h rename
NVMe: Export NVMe attributes to sysfs group
NVMe: Shutdown controller only for power-off
NVMe: IO queue deletion re-write
NVMe: Remove queue freezing on resets
NVMe: Use a retryable error code on reset
NVMe: Fix admin queue ring wrap
nvme: make SG_IO support optional
nvme: fixes for NVME_IOCTL_IO_CMD on the char device
nvme: synchronize access to ctrl->namespaces
nvme: Move nvme_freeze/unfreeze_queues to nvme core
PCI/AER: include header file
NVMe: Export namespace attributes to sysfs
NVMe: Add pci error handlers
block: remove REQ_NO_TIMEOUT flag
nvme: merge iod and cmd_info
nvme: meta_sg doesn't have to be an array
nvme: properly free resources for cancelled command
nvme: simplify completion handling
nvme: special case AEN requests
...
Pull core block updates from Jens Axboe:
"We don't have a lot of core changes this time around, it's mostly in
drivers, which will come in a subsequent pull.
The cores changes include:
- blk-mq
- Prep patch from Christoph, changing blk_mq_alloc_request() to
take flags instead of just using gfp_t for sleep/nosleep.
- Doc patch from me, clarifying the difference between legacy
and blk-mq for timer usage.
- Fixes from Raghavendra for memory-less numa nodes, and a reuse
of CPU masks.
- Cleanup from Geliang Tang, using offset_in_page() instead of open
coding it.
- From Ilya, rename request_queue slab to it reflects what it holds,
and a fix for proper use of bdgrab/put.
- A real fix for the split across stripe boundaries from Keith. We
yanked a broken version of this from 4.4-rc final, this one works.
- From Mike Krinkin, emit a trace message when we split.
- From Wei Tang, two small cleanups, not explicitly clearing memory
that is already cleared"
* 'for-4.5/core' of git://git.kernel.dk/linux-block:
block: use bd{grab,put}() instead of open-coding
block: split bios to max possible length
block: add call to split trace point
blk-mq: Avoid memoryless numa node encoded in hctx numa_node
blk-mq: Reuse hardware context cpumask for tags
blk-mq: add a flags parameter to blk_mq_alloc_request
Revert "blk-flush: Queue through IO scheduler when flush not required"
block: clarify blk_add_timer() use case for blk-mq
bio: use offset_in_page macro
block: do not initialise statics to 0 or NULL
block: do not initialise globals to 0 or NULL
block: rename request_queue slab cache
1/ Media error handling: The 'badblocks' implementation that originated
in md-raid is up-levelled to a generic capability of a block device.
This initial implementation is limited to being consulted in the pmem
block-i/o path. Later, 'badblocks' will be consulted when creating
dax mappings.
2/ Raw block device dax: For virtualization and other cases that want
large contiguous mappings of persistent memory, add the capability to
dax-mmap a block device directly.
3/ Increased /dev/mem restrictions: Add an option to treat all io-memory
as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is
actively using an address range. This behavior is controlled via the
new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the
existing "iomem=relaxed" kernel command line option.
4/ Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
block device shutdown crash fix, and other small libnvdimm fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7V5r
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has appeared in -next and independently received a
build success notification from the kbuild robot. The 'for-4.5/block-
dax' topic branch was rebased over the weekend to drop the "block
device end-of-life" rework that Al would like to see re-implemented
with a notifier, and to address bug reports against the badblocks
integration.
There is pending feedback against "libnvdimm: Add a poison list and
export badblocks" received last week. Linda identified some localized
fixups that we will handle incrementally.
Summary:
- Media error handling: The 'badblocks' implementation that
originated in md-raid is up-levelled to a generic capability of a
block device. This initial implementation is limited to being
consulted in the pmem block-i/o path. Later, 'badblocks' will be
consulted when creating dax mappings.
- Raw block device dax: For virtualization and other cases that want
large contiguous mappings of persistent memory, add the capability
to dax-mmap a block device directly.
- Increased /dev/mem restrictions: Add an option to treat all
io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access
while a driver is actively using an address range. This behavior
is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be
overridden by the existing "iomem=relaxed" kernel command line
option.
- Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
block device shutdown crash fix, and other small libnvdimm fixes"
* tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits)
block: kill disk_{check|set|clear|alloc}_badblocks
libnvdimm, pmem: nvdimm_read_bytes() badblocks support
pmem, dax: disable dax in the presence of bad blocks
pmem: fail io-requests to known bad blocks
libnvdimm: convert to statically allocated badblocks
libnvdimm: don't fail init for full badblocks list
block, badblocks: introduce devm_init_badblocks
block: clarify badblocks lifetime
badblocks: rename badblocks_free to badblocks_exit
libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h
libnvdimm: Add a poison list and export badblocks
nfit_test: Enable DSMs for all test NFITs
md: convert to use the generic badblocks code
block: Add badblock management for gendisks
badblocks: Add core badblock management code
block: fix del_gendisk() vs blkdev_ioctl crash
block: enable dax for raw block devices
block: introduce bdev_file_inode()
restrict /dev/mem to idle io memory ranges
arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
...
This splits bio in the middle of a vector to form the largest possible
bio at the h/w's desired alignment, and guarantees the bio being split
will have some data.
The criteria for splitting is changed from the max sectors to the h/w's
optimal sector alignment if it is provided. For h/w that advertise their
block storage's underlying chunk size, it's a big performance win to not
submit commands that cross them. If sector alignment is not provided,
this patch uses the max sectors as before.
This addresses the performance issue commit d380561113 attempted to
fix, but was reverted due to splitting logic error.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: <stable@vger.kernel.org> # 4.4.x-
Signed-off-by: Jens Axboe <axboe@fb.com>
Longer term teach dax to punch "error" holes in mapping requests and
deliver SIGBUS to applications that consume a bad pmem page. For now,
simply disable the dax performance optimization in the presence of known
errors.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Provide a devres interface for initializing a badblocks instance. The
pmem driver has several scenarios where it will be beneficial to have
this structure automatically freed when the device is disabled / fails
probe.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The badblocks list attached to a gendisk is allocated by the driver
which equates to the driver owning the lifetime of the object. Do not
automatically free it in del_gendisk(). This is in preparation for
expanding the use of badblocks in libnvdimm drivers and introducing
devm_init_badblocks().
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For symmetry with badblocks_init() make it clear that this path only
destroys incremental allocations of a badblocks instance, and does not
free the badblocks instance itself.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
NVDIMM devices, which can behave more like DRAM rather than block
devices, may develop bad cache lines, or 'poison'. A block device
exposed by the pmem driver can then consume poison via a read (or
write), and cause a machine check. On platforms without machine
check recovery features, this would mean a crash.
The block device maintaining a runtime list of all known sectors that
have poison can directly avoid this, and also provide a path forward
to enable proper handling/recovery for DAX faults on such a device.
Use the new badblock management interfaces to add a badblocks list to
gendisks.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Take the core badblocks implementation from md, and make it generally
available. This follows the same style as kernel implementations of
linked lists, rb-trees etc, where you can have a structure that can be
embedded anywhere, and accessor functions to manipulate the data.
The only changes in this copy of the code are ones to generalize
function/variable names from md-specific ones. Also add init and free
functions.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When tearing down a block device early in its lifetime, userspace may
still be performing discovery actions like blkdev_ioctl() to re-read
partitions.
The nvdimm_revalidate_disk() implementation depends on
disk->driverfs_dev to be valid at entry. However, it is set to NULL in
del_gendisk() and fatally this is happening *before* the disk device is
deleted from userspace view.
There's no reason for del_gendisk() to clear ->driverfs_dev. That
device is the parent of the disk. It is guaranteed to not be freed
until the disk, as a child, drops its ->parent reference.
We could also fix this issue locally in nvdimm_revalidate_disk() by
using disk_to_dev(disk)->parent, but lets fix it globally since
->driverfs_dev follows the lifetime of the parent. Longer term we
should probably just add a @parent parameter to add_disk(), and stop
carrying this pointer in the gendisk.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa00340a8>] nvdimm_revalidate_disk+0x18/0x90 [libnvdimm]
CPU: 2 PID: 538 Comm: systemd-udevd Tainted: G O 4.4.0-rc5 #2257
[..]
Call Trace:
[<ffffffff8143e5c7>] rescan_partitions+0x87/0x2c0
[<ffffffff810f37f9>] ? __lock_is_held+0x49/0x70
[<ffffffff81438c62>] __blkdev_reread_part+0x72/0xb0
[<ffffffff81438cc5>] blkdev_reread_part+0x25/0x40
[<ffffffff8143982d>] blkdev_ioctl+0x4fd/0x9c0
[<ffffffff811246c9>] ? current_kernel_time64+0x69/0xd0
[<ffffffff812916dd>] block_ioctl+0x3d/0x50
[<ffffffff81264c38>] do_vfs_ioctl+0x308/0x560
[<ffffffff8115dbd1>] ? __audit_syscall_entry+0xb1/0x100
[<ffffffff810031d6>] ? do_audit_syscall_entry+0x66/0x70
[<ffffffff81264f09>] SyS_ioctl+0x79/0x90
[<ffffffff81902672>] entry_SYSCALL_64_fastpath+0x12/0x76
Reported-by: Robert Hu <robert.hu@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If an application wants exclusive access to all of the persistent memory
provided by an NVDIMM namespace it can use this raw-block-dax facility
to forgo establishing a filesystem. This capability is targeted
primarily to hypervisors wanting to provision persistent memory for
guests. It can be disabled / enabled dynamically via the new BLKDAXSET
ioctl.
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This reverts commit d380561113.
If we end up splitting on the first segment, we don't adjust
the sector count. That results in hitting a BUG() with attempting
to split 0 sectors.
As this is just a performance issue and not a regression since
4.3 release, let's just rever this change. That gives us more
time to test a real fix for 4.5, which would be marked for
stable anyway.
We currently only have an inline/sync helper to restart a stopped
queue. If drivers need an async version, they have to roll their
own. Add a generic helper instead.
Signed-off-by: Jens Axboe <axboe@fb.com>
For h/w that advertise their block storage's underlying chunk size, it's
a big performance win to not submit commands that cross them. This patch
uses that criteria if it is provided. If it is not provided, this patch
uses the max sectors as before.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block layer fixes from Jens Axboe:
"Three small fixes for 4.4 final. Specifically:
- The segment issue fix from Junichi, where the old IO path does a
bio limit split before potentially bouncing the pages. We need to
do that in the right order, to ensure that limitations are met.
- A NVMe surprise removal IO hang fix from Keith.
- A use-after-free in null_blk, introduced by a previous patch in
this series. From Mike Krinkin"
* 'for-linus' of git://git.kernel.dk/linux-block:
null_blk: fix use-after-free error
block: ensure to split after potentially bouncing a bio
NVMe: IO ending fixes on surprise removal
blk_queue_bio() does split then bounce, which makes the segment
counting based on pages before bouncing and could go wrong. Move
the split to after bouncing, like we do for blk-mq, and the we
fix the issue of having the bio count for segments be wrong.
Fixes: 54efd50bfd ("block: make generic_make_request handle arbitrarily sized bios")
Cc: stable@vger.kernel.org
Tested-by: Artem S. Tashkinov <t.artem@lycos.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This was added for the 'magic' AEN requests in the NVMe driver that never
return. We now handle them purely inside the driver and don't need this
core hack any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Timer context is not very useful for drivers to perform any meaningful abort
action from. So instead of calling the driver from this useless context
defer it to a workqueue as soon as possible.
Note that while a delayed_work item would seem the right thing here I didn't
dare to use it due to the magic in blk_add_timer that pokes deep into timer
internals. But maybe this encourages Tejun to add a sensible API for that to
the workqueue API and we'll all be fine in the end :)
Contains a major update from Keith Bush:
"This patch removes synchronizing the timeout work so that the timer can
start a freeze on its own queue. The timer enters the queue, so timer
context can only start a freeze, but not wait for frozen."
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block layer fixes from Jens Axboe:
"A set of fixes for the current series. This contains:
- A bunch of fixes for lightnvm, should be the last round for this
series. From Matias and Wenwei.
- A writeback detach inode fix from Ilya, also marked for stable.
- A block (though it says SCSI) fix for an OOPS in SCSI runtime power
management.
- Module init error path fixes for null_blk from Minfei"
* 'for-linus' of git://git.kernel.dk/linux-block:
null_blk: Fix error path in module initialization
lightnvm: do not compile in debugging by default
lightnvm: prevent gennvm module unload on use
lightnvm: fix media mgr registration
lightnvm: replace req queue with nvmdev for lld
lightnvm: comments on constants
lightnvm: check mm before use
lightnvm: refactor spin_unlock in gennvm_get_blk
lightnvm: put blks when luns configure failed
lightnvm: use flags in rrpc_get_blk
block: detach bdev inode from its wb in __blkdev_put()
SCSI: Fix NULL pointer dereference in runtime PM
The new name is irq_poll as iopoll is already taken. Better suggestions
welcome.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
We recently changed bio_integrity_alloc() to return ERR_PTRs instead of
NULL but these calls were missed.
Fixes: 06c1e3902a ('blk-integrity: empty implementation when disabled')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The following commit which went into mainline through networking tree
3b13758f51 ("cgroups: Allow dynamically changing net_classid")
conflicts in net/core/netclassid_cgroup.c with the following pending
fix in cgroup/for-4.4-fixes.
1f7dd3e5a6 ("cgroup: fix handling of multi-destination migration from subtree_control enabling")
The former separates out update_classid() from cgrp_attach() and
updates it to walk all fds of all tasks in the target css so that it
can be used from both migration and config change paths. The latter
drops @css from cgrp_attach().
Resolve the conflict by making cgrp_attach() call update_classid()
with the css from the first task. We can revive @tset walking in
cgrp_attach() but given that net_cls is v1 only where there always is
only one target css during migration, this is fine.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Nina Schiff <ninasc@fb.com>
This is quite a bumper crop of fixes: Three from Arnd correcting various build
issues in some configurations, a lock recursion in qla2xxx. Two potentially
exploitable issues in hpsa and mvsas, a potential null deref in st, A revert
of a bdi registration fix that turned out to cause even more problems, a set
of fixes to allow people who only defined MPT2SAS to still work after the
mpt2/mpt3sas merger and a couple of fixes for issues turned up by the hyper-v
storvsc driver.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJWY8fDAAoJEDeqqVYsXL0MPhwH/Rs05LUU2vnlaZDdDpH5zY56
YQgKh5duF+ZH+Y4NxX5kkLLo05wpE6xD5xp2yzzmnjTA0Uf/yLVHNdb5D6tRZgSo
mZjAX+/wGDb/ErwvwTk/K2mhEvB0iZJJVMyWcG3F9dKgciRCF/p1Gn5EarGmc+vM
w/9xrs1j24Pw7ipHgBj9zU13w+SPMI7LunR0oYL9CJg24jgXG9sAbrwLkox5kHLo
FFBCrZhev1mzFKa1C+Ln3s0iSf0yEQMd4khzPJAUElkw812PZ7I6r4bCP0ZPKDed
JR8zex9jo77RyWZwA7fIathA0/ujv0AeIRXgvzb0/io1Yk577r98vt+S3koQVK8=
=ptgb
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is quite a bumper crop of fixes: three from Arnd correcting
various build issues in some configurations, a lock recursion in
qla2xxx. Two potentially exploitable issues in hpsa and mvsas, a
potential null deref in st, a revert of a bdi registration fix that
turned out to cause even more problems, a set of fixes to allow people
who only defined MPT2SAS to still work after the mpt2/mpt3sas merger
and a couple of fixes for issues turned up by the hyper-v storvsc
driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
mpt3sas: fix Kconfig dependency problem for mpt2sas back compatibility
Revert "scsi: Fix a bdi reregistration race"
mpt3sas: Add dummy Kconfig option for backwards compatibility
Fix a memory leak in scsi_host_dev_release()
block/sd: Fix device-imposed transfer length limits
scsi_debug: fix prevent_allow+verify regressions
MAINTAINERS: Add myself as co-maintainer of the SCSI subsystem.
sd: Make discard granularity match logical block size when LBPRZ=1
scsi: hpsa: select CONFIG_SCSI_SAS_ATTR
scsi: advansys needs ISA dma api for ISA support
scsi_sysfs: protect against double execution of __scsi_remove_device()
st: fix potential null pointer dereference.
scsi: report 'INQUIRY result too short' once per host
advansys: fix big-endian builds
qla2xxx: Fix rwlock recursion
hpsa: logical vs bitwise AND typo
mvsas: don't allow negative timeouts
mpt3sas: Fix use sas_is_tlr_enabled API before enabling MPI2_SCSIIO_CONTROL_TLR_ON flag
The routines in scsi_pm.c assume that if a runtime-PM callback is
invoked for a SCSI device, it can only mean that the device's driver
has asked the block layer to handle the runtime power management (by
calling blk_pm_runtime_init(), which among other things sets q->dev).
However, this assumption turns out to be wrong for things like the ses
driver. Normally ses devices are not allowed to do runtime PM, but
userspace can override this setting. If this happens, the kernel gets
a NULL pointer dereference when blk_post_runtime_resume() tries to use
the uninitialized q->dev pointer.
This patch fixes the problem by checking q->dev in block layer before
handle runtime PM. Since ses doesn't define any PM callbacks and call
blk_pm_runtime_init(), the crash won't occur.
This fixes Bugzilla #101371.
https://bugzilla.kernel.org/show_bug.cgi?id=101371
More discussion can be found from below link.
http://marc.info/?l=linux-scsi&m=144163730531875&w=2
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Xiangliang Yu <Xiangliang.Yu@amd.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Terry <Michael.terry@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
There is a split tracepoint that is supposed to be called when
bio is splitted, and it was called in bio_split function until
commit 4b1faf9316 ("block: Kill bio_pair_split()").
But now, no one reports splits, so this patch adds call to
trace_block_split back in blk_queue_split right after split.
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In architecture like powerpc, we can have cpus without any local memory
attached to it (a.k.a memoryless nodes). In such cases cpu to node mapping
can result in memory allocation hints for block hctx->numa_node populated
with node values which does not have real memory.
Instead use local_memory_node(), which is guaranteed to have memory.
local_memory_node is a noop in other architectures that does not support
memoryless nodes.
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
hctx->cpumask is already populated and let the tag cpumask follow that
instead of going through a new for loop.
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch moves the blk_integrity_payload definition outside the
CONFIG_BLK_DEV_INTERITY dependency and provides empty function
implementations when the kernel configuration disables integrity
extensions. This simplifies drivers that make use of these to map user
data so they don't need to repeat the same configuration checks.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Updated by Jens to pass an error pointer return from
bio_integrity_alloc(), otherwise if CONFIG_BLK_DEV_INTEGRITY isn't
set, we return a weird ENOMEM from __nvme_submit_user_cmd()
if a meta buffer is set.
Signed-off-by: Jens Axboe <axboe@fb.com>
Consider the following v2 hierarchy.
P0 (+memory) --- P1 (-memory) --- A
\- B
P0 has memory enabled in its subtree_control while P1 doesn't. If
both A and B contain processes, they would belong to the memory css of
P1. Now if memory is enabled on P1's subtree_control, memory csses
should be created on both A and B and A's processes should be moved to
the former and B's processes the latter. IOW, enabling controllers
can cause atomic migrations into different csses.
The core cgroup migration logic has been updated accordingly but the
controller migration methods haven't and still assume that all tasks
migrate to a single target css; furthermore, the methods were fed the
css in which subtree_control was updated which is the parent of the
target csses. pids controller depends on the migration methods to
move charges and this made the controller attribute charges to the
wrong csses often triggering the following warning by driving a
counter negative.
WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40()
Modules linked in:
CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29
...
ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000
ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00
ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8
Call Trace:
[<ffffffff81551ffc>] dump_stack+0x4e/0x82
[<ffffffff810de202>] warn_slowpath_common+0x82/0xc0
[<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20
[<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40
[<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0
[<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330
[<ffffffff81188e05>] cgroup_migrate+0xf5/0x190
[<ffffffff81189016>] cgroup_attach_task+0x176/0x200
[<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460
[<ffffffff81189684>] cgroup_procs_write+0x14/0x20
[<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0
[<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190
[<ffffffff81265f88>] __vfs_write+0x28/0xe0
[<ffffffff812666fc>] vfs_write+0xac/0x1a0
[<ffffffff81267019>] SyS_write+0x49/0xb0
[<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76
This patch fixes the bug by removing @css parameter from the three
migration methods, ->can_attach, ->cancel_attach() and ->attach() and
updating cgroup_taskset iteration helpers also return the destination
css in addition to the task being migrated. All controllers are
updated accordingly.
* Controllers which don't care whether there are one or multiple
target csses can be converted trivially. cpu, io, freezer, perf,
netclassid and netprio fall in this category.
* cpuset's current implementation assumes that there's single source
and destination and thus doesn't support v2 hierarchy already. The
only change made by this patchset is how that single destination css
is obtained.
* memory migration path already doesn't do anything on v2. How the
single destination css is obtained is updated and the prep stage of
mem_cgroup_can_attach() is reordered to accomodate the change.
* pids is the only controller which was affected by this bug. It now
correctly handles multi-destination migrations and no longer causes
counter underflow from incorrect accounting.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
We already have the reserved flag, and a nowait flag awkwardly encoded as
a gfp_t. Add a real flags argument to make the scheme more extensible and
allow for a nicer calling convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
When bio has only one physical segment, we should set bio's
bi_seg_front_size as the real(final) size of the single segment.
Fixes: 02e707424c2ea(blk-merge: fix blk_bio_segment_split)
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a cloned request is retried on other queues it always needs
to be checked against the queue limits of that queue.
Otherwise the calculations for nr_phys_segments might be wrong,
leading to a crash in scsi_init_sgtable().
To clarify this the patch renames blk_rq_check_limits()
to blk_cloned_rq_check_limits() and removes the symbol
export, as the new function should only be used for
cloned requests and never exported.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Fixes: e2a60da74 ("block: Clean up special command handling logic")
Cc: stable@vger.kernel.org # 3.7+
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Today, blockdev --rereadpt /dev/sda will fail with EBUSY if any
partition of sda is mounted (and will fail with EINVAL if pointed
at a partition). But it will pass if the entire block device is
formatted with a filesystem and mounted. I don't think this makes
sense; partitioning should surely not ever change out from under
a mounted device.
So check for bdev->bd_super, and fail that with -EBUSY as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 4f258a4634 ("sd: Fix maximum I/O size for BLOCK_PC requests")
had the unfortunate side-effect of removing an implicit clamp to
BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer
code. This caused problems for some SMR drives.
Debugging this issue revealed a few problems with the existing
infrastructure since the block layer didn't know how to deal with
device-imposed limits, only limits set by the I/O controller.
- Introduce a new queue limit, max_dev_sectors, which is used by the
ULD to signal the maximum sectors for a REQ_TYPE_FS request.
- Ensure that max_dev_sectors is correctly stacked and taken into
account when overriding max_sectors through sysfs.
- Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer
values for later processing.
- In sd_revalidate() set the queue's max_dev_sectors based on the
MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value
is not reported, fall back to a cap based on the CDB TRANSFER LENGTH
field size.
- In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits
VPD--if reported and sane--to signal the preferred device transfer
size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS.
- blk_limits_max_hw_sectors() is no longer used and can be removed.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: sweeneygj@gmx.com
Tested-by: Arzeets <anatol.pomozov@gmail.com>
Tested-by: David Eisner <david.eisner@oriel.oxon.org>
Tested-by: Mario Kicherer <dev@kicherer.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit 1b2ff19e6a.
Jan writes:
--
Thanks for report! After some investigation I found out we allocate
elevator specific data in __get_request() only for non-flush requests. And
this is actually required since the flush machinery uses the space in
struct request for something else. Doh. So my patch is just wrong and not
easy to fix since at the time __get_request() is called we are not sure
whether the flush machinery will be used in the end. Jens, please revert
1b2ff19e6a. Thanks!
I'm somewhat surprised that you can reliably hit the race where flushing
gets disabled for the device just while the request is in flight. But I
guess during boot it makes some sense.
--
So let's just revert it, we can fix the queue run manually after the
fact. This race is rare enough that it didn't trigger in testing, it
requires the specific disable-while-in-flight scenario to trigger.
This reverts commit 1b2ff19e6a.
Jan writes:
--
Thanks for report! After some investigation I found out we allocate
elevator specific data in __get_request() only for non-flush requests. And
this is actually required since the flush machinery uses the space in
struct request for something else. Doh. So my patch is just wrong and not
easy to fix since at the time __get_request() is called we are not sure
whether the flush machinery will be used in the end. Jens, please revert
1b2ff19e6a. Thanks!
I'm somewhat surprised that you can reliably hit the race where flushing
gets disabled for the device just while the request is in flight. But I
guess during boot it makes some sense.
--
So let's just revert it, we can fix the queue run manually after the
fact. This race is rare enough that it didn't trigger in testing, it
requires the specific disable-while-in-flight scenario to trigger.
