No core changes this time.
New drivers:
- Tegra234 support.
- Qualcomm IPQ5018 support.
- Intel Meteor Lake-S support.
- Qualcomm SDX75 subdriver.
- Qualcomm SPMI-based PM8953 support.
Improvements:
- Fix up support for GPIO3 on the AXP209.
- Push-pull drive configuration support for the AT91 PIO4.
- Fix misc non-urgent bugs in the AMD driver.
- Misc non-urgent improved error handling.
- Misc janitorial and minor improvements.
-----BEGIN PGP SIGNATURE-----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=MMUo
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time
New drivers:
- Tegra234 support
- Qualcomm IPQ5018 support
- Intel Meteor Lake-S support
- Qualcomm SDX75 subdriver
- Qualcomm SPMI-based PM8953 support
Improvements:
- Fix up support for GPIO3 on the AXP209
- Push-pull drive configuration support for the AT91 PIO4
- Fix misc non-urgent bugs in the AMD driver
- Misc non-urgent improved error handling
- Misc janitorial and minor improvements"
* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: cherryview: Drop goto label
pinctrl: baytrail: invert if condition
pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
pinctrl: tegra: avoid duplicate field initializers
dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
pinctrl: mlxbf3: remove broken Kconfig 'select'
pinctrl: spear: Remove unused of_gpio.h inclusion
pinctrl: lantiq: Remove unused of_gpio.h inclusion
pinctrl: at91-pio4: check return value of devm_kasprintf()
pinctrl: microchip-sgpio: check return value of devm_kasprintf()
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
pinctrl: intel: refine ->irq_set_type() hook
pinctrl: intel: refine ->set_mux() hook
pinctrl: baytrail: Use str_hi_lo() helper
lib/string_choices: Add str_high_low() helper
lib/string_helpers: Split out string_choices.h
lib/string_helpers: Add missing header files to MAINTAINERS database
pinctrl: npcm7xx: Add missing check for ioremap
pinctrl:sunplus: Add check for kmalloc
...
There are two new SoC families this time, and both appear fairly similar:
The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core
Cortex-A35 based chips for the low-power industrial embedded market,
and they mark the first 64-bit product in a widely used family of 32-bit
Arm MCUs and SoCs.
The way into the kernel is completely different here: The team at ST has
a long history of working upstream with their STM32MP1 and other SoCs,
and they produced a complete port to arm64 together with the initial
announcement. Nuvoton also has multiple SoC product lines with current
or previous upstream support, but those are maintained by third parties
and are unrelated. The patch series from Nuvoton's Jacky Huang had to
go through many revisisions to get to this point and is still missing
a few drivers including the serial port for the moment.
The branch contains the devicetree files as well as all the code changes,
in order to have something that can be tested standalone.
-----BEGIN PGP SIGNATURE-----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=zaVi
-----END PGP SIGNATURE-----
Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new ARM SoC support from Arnd Bergmann:
"There are two new SoC families this time, and both appear fairly
similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are
both dual-core Cortex-A35 based chips for the low-power industrial
embedded market, and they mark the first 64-bit product in a widely
used family of 32-bit Arm MCUs and SoCs.
The way into the kernel is completely different here: The team at ST
has a long history of working upstream with their STM32MP1 and other
SoCs, and they produced a complete port to arm64 together with the
initial announcement. Nuvoton also has multiple SoC product lines with
current or previous upstream support, but those are maintained by
third parties and are unrelated. The patch series from Nuvoton's Jacky
Huang had to go through many revisisions to get to this point and is
still missing a few drivers including the serial port for the moment.
The branch contains the devicetree files as well as all the code
changes, in order to have something that can be tested standalone"
* tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
clk: nuvoton: Use clk_parent_data instead of string for parent clock
clk: nuvoton: Update all constant hex values to lowercase
clk: nuvoton: Add clk-ma35d1.h for driver extern functions
remoteproc: stm32: use correct format strings on 64-bit
MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
arm64: dts: st: add stm32mp257f-ev1 board support
dt-bindings: stm32: document stm32mp257f-ev1 board
arm64: dts: st: introduce stm32mp25 pinctrl files
arm64: dts: st: introduce stm32mp25 SoCs family
arm64: introduce STM32 family on Armv8 architecture
dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
pinctrl: stm32: add stm32mp257 pinctrl support
dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
Documentation/process: add soc maintainer handbook
reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35
reset: Add Nuvoton ma35d1 reset driver support
clk: nuvoton: Add clock driver for ma35d1 clock controller
arm64: dts: nuvoton: Add initial ma35d1 device tree
dt-bindings: serial: Document ma35d1 uart controller
...
This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree, I
don't know what it is about those two trees (this for spi-geni-qcom).
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZkRUACgkQJNaLcl1U
h9A0bAf+IM6F/vTF7R/2NTlR3M/Z7HGinxK1oit6LuZfKnveaRRCEWvBVoZzZpjs
CzdWTPBWA2jyETzEqmX7gxYnxf2aaLieLEpKRZSh3uQd5OKmrizQDs5/OdaVUViK
/ytmqd/IFgFfwaI+az38CQlTf+dDyuJDB0OwlkEkoaxWjeiAh6INBh6xO9aKczoW
lFd0tOVQt1EcBKdB4tBJLTFIWWsG66xy9NZ018FrcA+bCmQVBvkbqcahayI5Q6Kw
m5H7cZuFbKV51AlyYMF/C4Lwhy1mOT166eRmSrgxBXCsqhpFeHYkJQkmumNd3gkQ
oSQPTZHqSblJA7Utw09mlT6r/xqL0Q==
=/f85
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree,
I don't know what it is about those two trees (this for
spi-geni-qcom).
Summary:
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"
* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
regulator: Add Renesas PMIC RAA215300 driver
regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
regulator: ltc3676: Use maple tree register cache
regulator: ltc3589: Use maple tree register cache
regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
regulator: mt6358: Use linear voltage helpers for single range regulators
regulator: mt6358: Const-ify mt6358_regulator_info data structures
regulator: mt6358: Drop *_SSHUB regulators
regulator: mt6358: Merge VCN33_* regulators
regulator: dt-bindings: mt6358: Drop *_sshub regulators
regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
regulator: Switch two more i2c drivers back to use .probe()
spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
regulator: axp20x: Add AXP15060 support
regulator: axp20x: Add support for AXP313a variant
dt-bindings: pfuze100.yaml: Add an entry for interrupts
regulator: stm32-pwr: Fix regulator disabling
...
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.
The details of PMIC can be found here[1].
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.
* Fix of OPEN DRAIN pin mode setting in a few drivers
* Reduce a scope of spin lock in the Bay Trail driver
* Decrease a code footprint by refactoring in a few drivers
* Expand string choices and reuse that in the Bay Trail driver
The following is an automated git shortlog grouped by driver:
baytrail:
- invert if condition
- add warning for BYT_VAL_REG retrieval failure
- reduce scope of spinlock in ->dbg_show() hook
- Use str_hi_lo() helper
- Use BIT() in BYT_PULL_ASSIGN_* definitions
- Unify style of error and debug messages
cherryview:
- Drop goto label
- Return correct value if pin in push-pull mode
- Don't use IRQ core constanst for invalid IRQ
intel:
- refine ->irq_set_type() hook
- refine ->set_mux() hook
- Add Intel Meteor Lake-S pin controller support
lib/string_helpers:
- Add str_high_low() helper
- Split out string_choices.h
- Add missing header files to MAINTAINERS database
merrifield:
- Use BUFCFG_PINMODE_GPIO in ->pin_dbg_show()
- Fix open-drain pin mode configuration
moorefield:
- Use BUFCFG_PINMODE_GPIO in ->pin_dbg_show()
- Fix open-drain pin mode configuration
-----BEGIN PGP SIGNATURE-----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=pJDH
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.5-1
* Fix of OPEN DRAIN pin mode setting in a few drivers
* Reduce a scope of spin lock in the Bay Trail driver
* Decrease a code footprint by refactoring in a few drivers
* Expand string choices and reuse that in the Bay Trail driver
The following is an automated git shortlog grouped by driver:
baytrail:
- invert if condition
- add warning for BYT_VAL_REG retrieval failure
- reduce scope of spinlock in ->dbg_show() hook
- Use str_hi_lo() helper
- Use BIT() in BYT_PULL_ASSIGN_* definitions
- Unify style of error and debug messages
cherryview:
- Drop goto label
- Return correct value if pin in push-pull mode
- Don't use IRQ core constanst for invalid IRQ
intel:
- refine ->irq_set_type() hook
- refine ->set_mux() hook
- Add Intel Meteor Lake-S pin controller support
lib/string_helpers:
- Add str_high_low() helper
- Split out string_choices.h
- Add missing header files to MAINTAINERS database
merrifield:
- Use BUFCFG_PINMODE_GPIO in ->pin_dbg_show()
- Fix open-drain pin mode configuration
moorefield:
- Use BUFCFG_PINMODE_GPIO in ->pin_dbg_show()
- Fix open-drain pin mode configuration
We do not use goto labels in the Intel pin control drivers,
so drop the only one in the entire folder.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Invert if condition and get rid of redundant else.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-4-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add warning for BYT_VAL_REG retrieval failure and continue such case
to avoid unintended reads/writes in pm_ops.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-3-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reduce scope of spinlock to IO operations in ->dbg_show() hook
and save a few bytes.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-12 (-12)
Function old new delta
byt_gpio_dbg_show 890 878 -12
Total: Before=17029, After=17017, chg -0.07%
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The drv_reg field is initialized both in the DRV_PINGROUP_ENTRY_N/DRV_PINGROUP_ENTRY_Y
macros and in DRV_PINGROUP_Y. Since each pingroup expands both macros, the are
always duplicate and turning on -Woverride-init (which is disabled by default)
causes a huge amount of warnings like:
drivers/pinctrl/tegra/pinctrl-tegra234.c:1384:27: error: initialized field overwritten [-Werror=override-init]
1384 | #define DRV_PINGROUP_Y(r) ((r))
| ^
drivers/pinctrl/tegra/pinctrl-tegra234.c:1397:28: note: in expansion of macro 'DRV_PINGROUP_Y'
1397 | .drv_reg = DRV_PINGROUP_Y(r), \
| ^~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra234.c:1447:49: note: in expansion of macro 'DRV_PINGROUP_ENTRY_Y'
1447 | #define drive_soc_gpio08_pb0 DRV_PINGROUP_ENTRY_Y(0x500c, 12, 5, 20, 5, -1, -1, -1, -1, 0)
| ^~~~~~~~~~~~~~~~~~~~
...
Remove the intialization that is never used here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616161603.1127687-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The new pinctrl driver selects GPIO_MLXBF3, but that can not be enabled yet because
the MELLANOX_PLATFORM symbol does not exist in the tree:
WARNING: unmet direct dependencies detected for GPIO_MLXBF3
Depends on [n]: GPIOLIB [=y] && PCI [=n] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
Selected by [y]:
- PINCTRL_MLXBF3 [=y] && PINCTRL [=y] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
As it turns out, the pinctlr driver still builds fine without this, so just
remove the select statement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230619082104.699331-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio.h is not and shouldn't be used in the drivers. Remove it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230615164158.25406-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).
Fixes: 776180848b ("pinctrl: introduce driver for Atmel PIO4 controller")
Depends-on: 1c4e5c470a ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks")
Depends-on: 5a8f9cf269 ("pinctrl: at91-pio4: use proper format specifier for unsigned int")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230615105333.585304-4-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).
Fixes: 7e5ea974e6 ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230615105333.585304-3-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The config passed in by pad wakeup is 1, when num_configs is 1,
Configuration [1] should not be fetched, which will be detected
by KASAN as a memory out of bounds condition. Modify to get
configs[1] when num_configs is 2.
Fixes: f60c9eac54 ("gpio: mxc: enable pad wakeup on i.MX8x platforms")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230504233736.3766296-1-xiaolei.wang@windriver.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Refine ->irq_set_type() hook and improve its readability by:
- Reducing scope of spinlock by moving unneeded operations out of it.
- Dropping redundant PADCFG0_RXEVCFG_SHIFT and including it directly
into PADCFG0_RXEVCFG_* definitions.
- Utilizing temporary variables for common operations.
- Simplifying if-else-if chain.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Utilize a temporary variable for common shift operation in
->set_mux() hook and improve readability while saving a few bytes.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3)
Function old new delta
intel_pinmux_set_mux 245 242 -3
Total: Before=10472, After=10469, chg -0.03%
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230613085054.10976-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To make the GPIO tracking around suspend easier for end users to
use, link it with pm_debug_messages. This will make discovering
sources of spurious GPIOs around suspend easier.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().
Fixes: 3b588e43ee ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230607095829.1345-1-jiasheng@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix Smatch static checker warning:
potential null dereference 'configs'. (kmalloc returns null)
Changes in v2:
1. Add free allocated memory before returned -ENOMEM.
2. Add call of_node_put() before returned -ENOMEM.
Fixes: aa74c44be1 ("pinctrl: Add driver for Sunplus SP7021")
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1685277277-12209-1-git-send-email-wellslutw@gmail.com
[Rebased on the patch from Lu Hongfei]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is debugfs and there is no much sense to strict the user from
sending as much data as they can. The memdup_user_nul() will anyway
fail if there is not enough memory.
Relax the user input size by removing an artificial limitaion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230604131215.78847-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Current code is suboptimal in three ways:
1) it explicitly terminates the string which is not needed;
2) it might provoke additional faults, because asked lenght might be
bigger than the real one;
3) it consumes more than needed lines in the source.
Instead of using kmalloc() + strncpy_from_user() + terminating, just
utilize memdup_user_nul().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230604131215.78847-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This change adds support for the two pin controllers found on Tegra234.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230605154230.2910847-3-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The audio pin controller drivers depend on PINCTRL_LPASS_LPI, but since
PINCTRL_LPASS_LPI is not the first entry, they are not displayed in
menuconfig as dependent of PINCTRL_LPASS_LPI. Re-order the entries to
fix this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In menuconfig, some entries depending on PINCTRL_MSM are indented and
expressed as dependening but some not, because of other Kconfig entries
in between,
Move all main Qualcomm SoC pin controller driver entries into new
Kconfig.msm file so they will be nicely ordered in Kconfig file (by
CONFIG_ name) and properly indented as PINCTRL_MSM dependency in
menuconfig.
Functionally this is the same, but since entire file is guarded with "if
PINCTRL_MSM" drop this dependency from individual entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Makefile selected Qualcomm pinctrl drivers only for ARCH_QCOM, making
any COMPILE_TEST options inside Kconfig ((ARCH_QCOM || COMPILE_TEST) or
(OF || COMPILE_TEST)) not effective. Always descent to the qcom
subdirectory to fix this. All individual drivers are selected in
Makefile via dedicated CONFIG entries, thus this should not have
functional impact except when compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The common MSM pinctrl driver code (PINCTRL_MSM) uses
pinconf_generic_dt_node_to_map_group() from GENERIC_PINCONF, which is
not available for compile testing for !OF cases. Drivers actually do
not depend on OF. Move the OF dependency to the entry actually
depending on it and drop any "|| COMPILE_TEST", because OF is required
also for compile testing (lack of OF was never visible in compile
testing because none of the drivers could be compile tested due to
Makefile).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PINCTRL_MSM depends on GPIOLIB, thus individual driver entries depending
on the first do not have to depend on the latter.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Driver can bind only via ACPI matching and acpi_device_id is there
unconditionally, so drop useless ACPI_PTR() macro.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230601152026.1182648-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver adds pinctrl/GPIO support for Intel Meteor Lake-S.
The GPIO controller is based on the next generation GPIO hardware
but still compatible with the one supported by the Intel pinctrl
and GPIO core driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use explicit comparison to BUFCFG_PINMODE_GPIO instead of implying it.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently the pin may not be configured as open-drain in some
cases because the argument may be 0 for the boolean types of
the pin configurations. Fix this by ignoring the argument.
With that, allow to actually restore pin to the push-pull mode.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use explicit comparison to BUFCFG_PINMODE_GPIO instead of implying it.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently the pin may not be configured as open-drain in some
cases because the argument may be 0 for the boolean types of
the pin configurations. Fix this by ignoring the argument.
With that, allow to actually restore pin to the push-pull mode.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently the getter returns ENOTSUPP on pin configured in
the push-pull mode. Fix this by adding the missed switch case.
Fixes: ccdf81d08d ("pinctrl: cherryview: add option to set open-drain pin config")
Fixes: 6e08d6bbeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The semantics of INVALID_HWIRQ is rather localized to IPI usage.
Let's keep it that way.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The bias setting (pull-up or pull-down) are bit fields and
we never enable them both, hence use BIT() macro to define
them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use same formatting strings where it makes sense, so linker
will utilize only a single copy of it, otherwise make the
style similar to the rest of the messages of the close enough
semantics.
add/remove: 1/0 grow/shrink: 2/2 up/down: 91/-110 (-19)
Total: Before=17562, After=17543, chg -0.11%
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The .data field in struct of_device_id is used as a const member so it's
inappropriate to attach struct s32_pinctrl_soc_info with of_device_id
because some members in s32_pinctrl_soc_info need to be filled by
pinctrl-s32cc at runtime.
For this reason, struct s32_pinctrl_soc_info must be allocated in
pinctrl-s32cc and then create a new struct s32_pinctrl_soc_data in order
to represent const .data in of_device_id. To combine these two structures,
a s32_pinctrl_soc_data pointer is introduced in s32_pinctrl_soc_info.
Besides, use of_device_get_match_data() instead of of_match_device() since
the driver only needs to retrieve the .data from of_device_id.
Link: https://lore.kernel.org/r/20230329041630.8011-1-clin@suse.com/
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SoC-specific data is stored in pmx->soc and that's used throughout
the driver to access this data. The probe function has access to a local
version of that copy and uses it in some occasions. Replace them with
the more standard pmx->soc access for more consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230530105308.1292852-2-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function table is filled with group information based on other
instance-specific data at runtime. However, the function table can be
shared between multiple instances, causing the ->probe() function for
one instance to overwrite the table of a previously probed instance.
Fix this by sharing only the function names and allocating a separate
function table for each instance.
Fixes: 5a00473607 ("pinctrl: tegra: Separate Tegra194 instances")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230530105308.1292852-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
