Commit Graph

66164 Commits

Author SHA1 Message Date
Auke Kok
309af40b5f e1000e: restore flow control settings properly
After a cable unplug the forced flow control settings were lost
accidentally and the flow control settings fell back to the default
EEPROM determined values. This breaks for people who want to
run without fc enabled - after a cable reset the driver would
refuse to run with fc disabled.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:25 -07:00
Auke Kok
4e6c709c5a e1000e: Simple optimizations in e1000_xmit_frame
After an e1000 patch from Krishna Kumar <krkumar2@in.ibm.com>.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:25 -07:00
Krishna Kumar
6d1e3aa7bd e1000: Simple optimizations in e1000_xmit_frame
Some simple optimizations in e1000_xmit_frame.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:24 -07:00
Mattias Nissler
e2f036da2f [PATCH] mac80211: Defer setting of RX_FLAG_DECRYPTED.
The decryption handlers will skip the frame if the RX_FLAG_DECRYPTED
flag is set, so the early flag setting introduced by Johannes breaks
decryption. To work around this, call the handlers first and then set
the flag.

Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:23 -07:00
John W. Linville
0654ff055c [PATCH] ieee80211_if_set_type: make check for master dev more explicit
Problem description by Daniel Drake <dsd@gentoo.org>:

"This sequence of events causes loss of connectivity:

<plug in>
<associate as normal in managed mode>
ifconfig eth7 down
iwconfig eth7 mode monitor
ifconfig eth7 up
ifconfig eth7 down
iwconfig eth7 mode managed
<associate as normal>

At this point you are associated but TX does not work. This is because
the eth7 hard_start_xmit is still ieee80211_monitor_start_xmit."

The problem is caused by ieee80211_if_set_type checking for a non-zero
hard_start_xmit pointer value in order to avoid changing that value for
master devices.  The fix is to make that check more explicitly linked to
master devices rather than simply checking if the value has been
previously set.

CC: Daniel Drake <dsd@gentoo.org>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:23 -07:00
Holger Schurig
04799fae8e [PATCH] libertas: let get nick return what set nick has set
Make the get-nickname wireless extension actually work. Before
this patch, I could do "iwconfig eth1 nick BLAH" but "iwconfig
eth1" would have still showed "MRVL-USB8388" to me. Hey, and that
was wrong anyway, I'm on a CF card, not on USB :-)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-By: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:22 -07:00
Holger Schurig
cc32613792 [PATCH] libertas: remove one superfluous include
This makes scripts/checkincludes.pl happy.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:22 -07:00
Holger Schurig
e56188ac41 [PATCH] libertas: clean up scan debug messages
* make scan debug output cleaner
* change some LBS_DEB_ASSOC messages to LBS_DEB_SCAN, which is more correct
* move helper functions together
* print function return value in the tracing code at one central location

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-By: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:21 -07:00
Holger Schurig
314a886f08 [PATCH] libertas: fix "warning: Using plain integer as NULL pointer" sparse warnings
This fixes three "warning: Using plain integer as NULL pointer"
sparse warnings.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:20 -07:00
Holger Schurig
8b17d7234c [PATCH] libertas: fix a debug statement
Fix a debug statement

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:20 -07:00
Geert Uytterhoeven
d8b0fb51ef [PATCH] libertas link error due to gcc `smartness'
Some versions of gcc replace strstr() calls with a single-character `needle'
parameter by strchr() behind our back. This causes a link error if strchr() is
defined as an inline function in <asm/string.h> (e.g. on m68k):

| drivers/built-in.o: In function `libertas_parse_chan':
| linux/drivers/net/wireless/libertas/debugfs.c:209: undefined reference to `strchr'
| drivers/built-in.o: In function `libertas_parse_ssid':
| linux/drivers/net/wireless/libertas/debugfs.c:260: undefined reference to `strchr'

Avoid this by explicitly calling strchr() instead.

Also include <linux/string.h>, because this file calls lots of str*() routines.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-By: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-By: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:19 -07:00
Holger Schurig
6470a89de9 [PATCH] libertas: fix u8 constant
Don't write constants that are (per documentation and struct) u8
as 0x0001, use 0x01 instead. Also remove an useless cast.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-By: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:19 -07:00
Dan Williams
2bcde51d09 [PATCH] libertas: problems setting wpa keys
The 88w8385 chip, using SDIO interface and firmware release 5.0.11p0,
has problems when both unicast and multicast WPA keys are set in one
command. This patch ensures the keys are set independently.

The original author of this patch is Marc Pignat <marc.pignat@hevs.ch>

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:18 -07:00
Ivo van Doorn
515ea2492c [PATCH] rt2x00: Release 2.0.10
Version bump

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:17 -07:00
Ivo van Doorn
c22eb87b57 [PATCH] rt2x00: Allways memset memory obtained from skb_push()
When skb_push() is used we should memset the memory before
usage. This will prevent bugs which could occur when the
data is treated as TX descriptor.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:17 -07:00
Ivo van Doorn
37894473fb [PATCH] rt2x00: Clean disabling of rt73usb_get_tsf
By defining rt73usb_get_tsf to NULL we only
have 1 location that needs to be edited
when rt73usb_get_tsf can be enabled again.
This also reduces the number of #ifdefs in
the code which is also a "good thing"

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:16 -07:00
Ivo van Doorn
5c58ee51ff [PATCH] rt2x00: Reorganize configuration handler
Reorganize configuration handling by creating a extra
structure which contains precalculated values based
on the mac80211 values which are usefull for all
individual drivers.

This also fixes the preamble configuration problem,
up untill now preamble was never configured since
by default the rate->val value was used when changing
the mode.
Now rate->val will only be used to set the basic rate mask.
The preamble configuration will now be done correctly
through the erp_ie_changed callback function.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:15 -07:00
Ivo van Doorn
4f5af6eb3d [PATCH] rt2x00: Small optimizations
Make some small optimizations by removing
some simple if-statements.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:15 -07:00
Ivo van Doorn
5cbf830e13 [PATCH] rt2x00: Pass dev_state to rt2x00lib_toggle_rx
Directly pass a value from the enum dev_state with rt2x00lib_toggle_rx,
this will save us a ? : statement, and it is clearer then passing a 1 0
argument.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:14 -07:00
Ivo van Doorn
dd9fa2d21a [PATCH] rt2x00: Add get_tx_data_len callback function
The TX datalen must always be converted to a value rt73 and rt2500usb
understand. Both require to use a different size then skb->len.
First off this is required because the descriptor must be added,
but the second is because the value must be a multiple of either 2 or 4,
and it should not be a multiple of the USB packetmax

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:13 -07:00
Ivo van Doorn
9ee8f57e0a [PATCH] rt2x00: Cut lines down to 80 characters
rt61pci contained 1 line of 88 characters width,
this needs to be cut down.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:13 -07:00
Ivo van Doorn
a137e202b0 [PATCH] rt2x00: get_duration expects values in 100kbs
get_duration expects all speeds to be passed in 100kbs,
this means that passing 2 is incorrect and should be raised to 20

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:12 -07:00
Ivo van Doorn
feb24691e3 [PATCH] rt2x00: Move TSF sync values into rt2x00config
All drivers use the same values for TSF sync,
this will move the value determination into rt2x00config.c,
and the definition for the values to rt2x00reg.h

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:12 -07:00
Ivo van Doorn
81873e9ccd [PATCH] rt2x00: Fix rfkill handling
As reported by Modestas Vainius, enabling rkfill in 1 driver and
disabling it in a second could cause a NULL pointer exception when
the rfkill-disabled driver still sets the CONFIG_SUPPORT_HW_BUTTON flag.

Furthermore, rfkill expects the timeout as a value in milliseconds
instead of jiffies. Also increase the timeout to a second,
since this 250ms would be overkill.

Also the flag DEVICE_ENABLED_RADIO_HW is causing problems
for devices which do not support the hardware button
while rfkill is enabled in the driver.

To remidy this we should inverse the flag and its meaning,
rename the flag to DEVICE_DISABLED_RADIO_HW this means that
by default the radio is enabled by the hardware button (if present)
and can only be disabled explicitely.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:11 -07:00
Ivo van Doorn
5886d0dbf5 [PATCH] rt2x00: Don't use changed_flags inside configure_packet_filter
We shouldn't use changed_flags when configuring the packet filter,
we work directly with the total_flags which is safe enough since
we already check if something has changed after we applied our
packet filtering flag rules.
Also make sure that when the packet filter is scheduled, the
rt2x00dev->interface.filter is cleared to make sure the drivers
will update the packet filter instead of failing at the check:
*total_flags == rt2x00dev->interface.filter

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:10 -07:00
Ivo van Doorn
483272f5ee [PATCH] rt2x00: Move rt2x00dev flags into enumeration
By putting the flags into a enumeration we can
make it easier maintable since we don't have to
assign numbers for each flag. This makes it easier
to insert and remove flags.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:10 -07:00
Ivo van Doorn
6d7f9877a6 [PATCH] rt2x00: Store "STARTED" state during suspend
Store the started state into a new flag DEVICE_STARTED_SUSPEND
and set this when suspending while the device was started.
We can't check for is_interface_present() since only mac80211
knows if there are monitor interfaces present.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:09 -07:00
Ivo van Doorn
3a84732a5c [PATCH] rt2x00: Remove radio check from rt2x00lib_toggle_rx
Don't check if the radio is enabled in rt2x00lib_toggle_rx,
this is required since the link tuner should be disabled
when shutting down the device. The remaining calls inside the
rt2x00lib_toggle_rx handler should deliver no problems when
called while the radio is done.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:08 -07:00
Ivo van Doorn
4abee4bbd7 [PATCH] rt2x00: Remove duplicate code in MAC & BSSID handling
The various drivers contained duplicate code to handle the
MAC and BSSID initialization correctly. This moves the
address copy to little endian variables to rt2x00config.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:08 -07:00
Martti Huttunen
c109810318 [PATCH] p54usb: Add device ID for Linksys WUSB54AG
Add the device ID for Linksys WUSB54AG.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:07 -07:00
Michael Wu
c3cf60a97f [PATCH] rtl8187: Add device ID for HP wireless print kit usb dongle
This adds the device ID for the HP wireless print kit usb dongle.

Thanks to Thierry Merle for the patch to the original rtl8187 driver.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:06 -07:00
Dan Williams
0b53167697 [PATCH] ipw2200: batch non-user-requested scan result notifications
ipw2200 makes extensive use of background scanning when unassociated or
down.  Unfortunately, the firmware sends scan completed events many
times per second, which the driver pushes directly up to userspace.
This needlessly wakes up processes listening for wireless events many
times per second.  Batch together scan completed events for
non-user-requested scans and send them up to userspace every 4 seconds.
Scan completed events resulting from an SIOCSIWSCAN call are pushed up
without delay.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:06 -07:00
Marcin Juszkiewicz
04dd9d39b4 [PATCH] Add Linksys card to HostAP driver
Socket 1:
product info: "The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P", "RevA"
manfid: 0x0274, 0x3301

Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:05 -07:00
Daniel Drake
61ef606280 [PATCH] zd1211rw: Add ID for TalkTalk SNU5630NS/05
Tested by Su-Jong You
zd1211b chip 0471:1237 v4810 high 00-12-bf AL2230_RF pa0 g--N

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:04 -07:00
Stefan Lippers-Hollmann
46232d29f4 [PATCH] hostap_cs: Add device ID for Telekom T-Sinus 111card
This adds the PCMCIA device ID for the Deutsche Telekom T-Sinus 111card to
hostap_cs.

$ /sbin/lspcmcia -v
[...]
Socket 0 Device 0:      [hostap_cs]             (bus ID: 0.0)
        Configuration:  state: on
        Product Name:   T-Sinus 111card 2.0.0
        Identification: manf_id: 0x01bf card_id: 0x3301
                        function: 6 (network)
                        prod_id(1): "T-Sinus" (0x8c389dc1)
                        prod_id(2): "111card" (0x6a23ac17)
                        prod_id(3): --- (---)
                        prod_id(4): "2.0.0" (0x92b9effb)

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:04 -07:00
Herbert Xu
b7c6538cd8 [IPSEC]: Move state lock into x->type->output
This patch releases the lock on the state before calling x->type->output.
It also adds the lock to the spots where they're currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:03 -07:00
Herbert Xu
050f009e16 [IPSEC]: Lock state when copying non-atomic fields to user-space
This patch adds locking so that when we're copying non-atomic fields such as
life-time or coaddr to user-space we don't get a partial result.

For af_key I've changed every instance of pfkey_xfrm_state2msg apart from
expiration notification to include the keys and life-times.  This is in-line
with XFRM behaviour.

The actual cases affected are:

* pfkey_getspi: No change as we don't have any keys to copy.
* key_notify_sa:
	+ ADD/UPD: This wouldn't work otherwise.
	+ DEL: It can't hurt.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:02 -07:00
Herbert Xu
68325d3b12 [XFRM] user: Move attribute copying code into copy_to_user_state_extra
Here's a good example of code duplication leading to code rot.  The
notification patch did its own netlink message creation for xfrm states.
It duplicated code that was already in dump_one_state.  Guess what, the
next time (and the time after) when someone updated dump_one_state the
notification path got zilch.

This patch moves that code from dump_one_state to copy_to_user_state_extra
and uses it in xfrm_notify_sa too.  Unfortunately whoever updates this
still needs to update xfrm_sa_len since the notification path wants to
know the exact size for allocation.

At least I've added a comment saying so and if someone still forgest, we'll
have a WARN_ON telling us so.

I also changed the security size calculation to use xfrm_user_sec_ctx since
that's what we actually put into the skb.  However it makes no practical
difference since it has the same size as xfrm_sec_ctx.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:02 -07:00
Herbert Xu
658b219e93 [IPSEC]: Move common code into xfrm_alloc_spi
This patch moves some common code that conceptually belongs to the xfrm core
from af_key/xfrm_user into xfrm_alloc_spi.

In particular, the spin lock on the state is now taken inside xfrm_alloc_spi.
Previously it also protected the construction of the response PF_KEY/XFRM
messages to user-space.  This is inconsistent as other identical constructions
are not protected by the state lock.  This is bad because they in fact should
be protected but only in certain spots (so as not to hold the lock for too
long which may cause packet drops).

The SPI byte order conversion has also been moved.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:01 -07:00
Herbert Xu
75ba28c633 [IPSEC]: Remove gratuitous km wake-up events on ACQUIRE
There is no point in waking people up when creating/updating larval states
because they'll just go back to sleep again as larval states by definition
cannot be found by xfrm_state_find.

We should only wake them up when the larvals mature or die.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:01 -07:00
Herbert Xu
007f0211a8 [IPSEC]: Store IPv6 nh pointer in mac_header on output
Current the x->mode->output functions store the IPv6 nh pointer in the
skb network header.  This is inconvenient because the network header then
has to be fixed up before the packet can leave the IPsec stack.  The mac
header field is unused on output so we can use that to store this instead.

This patch does that and removes the network header fix-up in xfrm_output.

It also uses ipv6_hdr where appropriate in the x->type->output functions.

There is also a minor clean-up in esp4 to make it use the same code as
esp6 to help any subsequent effort to merge the two.

Lastly it kills two redundant skb_set_* statements in BEET that were
simply copied over from transport mode.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:00 -07:00
Herbert Xu
1ecafede83 [IPSEC]: Remove bogus ref count in xfrm_secpath_reject
Constructs of the form

	xfrm_state_hold(x);
	foo(x);
	xfrm_state_put(x);

tend to be broken because foo is either synchronous where this is totally
unnecessary or if foo is asynchronous then the reference count is in the
wrong spot.

In the case of xfrm_secpath_reject, the function is synchronous and therefore
we should just kill the reference count.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:59 -07:00
Pavel Emelyanov
32f0c4cbe4 [NETNS]: Don't memset() netns to zero manually
The newly created net namespace is set to 0 with memset()
in setup_net(). The setup_net() is also called for the
init_net_ns(), which is zeroed naturally as a global var.

So remove this memset and allocate new nets with the
kmem_cache_zalloc().

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:59 -07:00
Benjamin Thery
0a8891a0a4 [IPv6]: use container_of() macro in fib6_clean_node()
In ip6_fib.c, fib6_clean_node() casts a fib6_walker_t pointer to
a fib6_cleaner_t pointer assuming a struct fib6_walker_t (field 'w')
is the first field in struct fib6_walker_t.

To prevent any future problems that may occur if one day a field
is inadvertently inserted before the 'w' field in struct fib6_cleaner_t,
(and to improve readability), this patch uses the container_of() macro.

Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:58 -07:00
Pavel Emelyanov
4665079cbb [NETNS]: Move some code into __init section when CONFIG_NET_NS=n
With the net namespaces many code leaved the __init section,
thus making the kernel occupy more memory than it did before.
Since we have a config option that prohibits the namespace
creation, the functions that initialize/finalize some netns
stuff are simply not needed and can be freed after the boot.

Currently, this is almost not noticeable, since few calls
are no longer in __init, but when the namespaces will be
merged it will be possible to free more code. I propose to
use the __net_init, __net_exit and __net_initdata "attributes"
for functions/variables that are not used if the CONFIG_NET_NS
is not set to save more space in memory.

The exiting functions cannot just reside in the __exit section,
as noticed by David, since the init section will have
references on it and the compilation will fail due to modpost
checks. These references can exist, since the init namespace
never dies and the exit callbacks are never called. So I
introduce the __exit_refok attribute just like it is already
done with the __init_refok.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:58 -07:00
Karsten Keil
d62a38d1ab [ISDN]: Change I4L to use alloc_netdev().
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:57 -07:00
Ursula Braun
3607c44676 [8021Q]: transfer dev_id from real device
A net_device struct provides field dev_id. It is used for
unique ipv6 generation in case of shared network cards
(as for the OSA network cards of IBM System z).
If VLAN devices are built on top of such shared network cards,
this dev_id information needs to be transferred to the VLAN device.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:56 -07:00
Herbert Xu
45b17f48ea [IPSEC]: Move RO-specific output code into xfrm6_mode_ro.c
The lastused update check in xfrm_output can be done just as well in
the mode output function which is specific to RO.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:56 -07:00
Herbert Xu
cdf7e668d4 [IPSEC]: Unexport xfrm_replay_notify
Now that the only callers of xfrm_replay_notify are in xfrm, we can remove
the export.

This patch also removes xfrm_aevent_doreplay since it's now called in just
one spot.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:55 -07:00
Herbert Xu
436a0a4022 [IPSEC]: Move output replay code into xfrm_output
The replay counter is one of only two remaining things in the output code
that requires a lock on the xfrm state (the other being the crypto).  This
patch moves it into the generic xfrm_output so we can remove the lock from
the transforms themselves.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:54 -07:00