SCMIv2.0 adds a new Reset Management Protocol to manage various reset
states a given device or domain can enter. Device(s) that can be
collectively reset through a common reset signal constitute a reset
domain for the firmware.
A reset domain can be reset autonomously or explicitly through assertion
and de-assertion of the signal. When autonomous reset is chosen, the
firmware is responsible for taking the necessary steps to reset the
domain and to subsequently bring it out of reset. When explicit reset is
chosen, the caller has to specifically assert and then de-assert the
reset signal by issuing two separate RESET commands.
Add the basic SCMI reset infrastructure that can be used by Linux
reset controller driver.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI v2.0 adds support for "FastChannel" which do not use a message
header as they are specialized for a single message.
Only PERFORMANCE_LIMITS_{SET,GET} and PERFORMANCE_LEVEL_{SET,GET}
commands are supported over fastchannels. As they are optional, they
need to be discovered by PERFORMANCE_DESCRIBE_FASTCHANNEL command.
Further {LIMIT,LEVEL}_SET commands can have optional doorbell support.
Add support for making use of these fastchannels.
Cc: Ionela Voinescu <Ionela.Voinescu@arm.com>
Cc: Chris Redpath <Chris.Redpath@arm.com>
Cc: Quentin Perret <Quentin.Perret@arm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI v2.0 adds support for "FastChannel", a lightweight unidirectional
channel that is dedicated to a single SCMI message type for controlling
a specific platform resource. They do not use a message header as they
are specialized for a single message.
Only PERFORMANCE_LIMITS_{SET,GET} and PERFORMANCE_LEVEL_{SET,GET}
commands are supported over fastchannels. As they are optional, they
need to be discovered by PERFORMANCE_DESCRIBE_FASTCHANNEL command.
Further {LIMIT,LEVEL}_SET commands can have optional doorbell support.
Add support for discovery of these fastchannels.
Cc: Ionela Voinescu <Ionela.Voinescu@arm.com>
Cc: Chris Redpath <Chris.Redpath@arm.com>
Cc: Quentin Perret <Quentin.Perret@arm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Instead of type-casting the {tx,rx}.buf all over the place while
accessing them to read/write __le{32,64} from/to the firmware, let's
use the existing {get,put}_unaligned_le{32,64} accessors to hide all
the type cast ugliness.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
CLOCK_PROTOCOL_ATTRIBUTES provides attributes to indicate the maximum
number of pending asynchronous clock rate changes supported by the
platform. If it's non-zero, then we should be able to use asynchronous
clock rate set for any clocks until the maximum limit is reached.
Tracking the current count of pending asynchronous clock set rate
requests, we can decide if the incoming/new request for clock set rate
can be handled asynchronously or not until the maximum limit is
reached.
Cc: linux-clk@vger.kernel.org
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
CLOCK_PROTOCOL_ATTRIBUTES provides attributes to indicate the maximum
number of pending asynchronous clock rate changes supported by the
platform. If it's non-zero, then we should be able to use asynchronous
clock rate set for any clocks until the maximum limit is reached.
In order to add that support, let's drop the config flag passed to
clk_ops->rate_set and handle the asynchronous requests dynamically.
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SENSOR_DESCRIPTION_GET provides attributes to indicate if the sensor
supports asynchronous read. We can read that flag and use asynchronous
reads for any sensors with that attribute set.
Let's use the new scmi_do_xfer_with_response to support asynchronous
sensor reads.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SENSOR_DESCRIPTION_GET provides attributes to indicate if the sensor
supports asynchronous read. Ideally we should be able to read that flag
and use asynchronous reads for any sensors with that attribute set.
In order to add that support, let's drop the async flag passed to
sensor_ops->reading_get and dynamically switch between sync and async
flags based on the attributes as provided by the firmware.
Cc: linux-hwmon@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Messages that are sent to platform, also known as commands and can be:
1. Synchronous commands that block the channel until the requested work
has been completed. The platform responds to these commands over the
same channel and hence can't be used to send another command until the
previous command has completed.
2. Asynchronous commands on the other hand, the platform schedules the
requested work to complete later in time and returns almost immediately
freeing the channel for new commands. The response indicates the success
or failure in the ability to schedule the requested work. When the work
has completed, the platform sends an additional delayed response message.
Using the same transmit buffer used for sending the asynchronous command
even for the delayed response corresponding to it simplifies handling of
the delayed response. It's the caller of asynchronous command that is
responsible for allocating the completion flag that scmi driver can
complete to indicate the arrival of delayed response.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In order to identify the message type when a response arrives, we need
a mechanism to unpack the message header similar to packing. Let's
add one.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently we pre-allocate transmit buffers only and use the first free
slot in that pre-allocated buffer for transmitting any new message that
are generally originated from OS to the platform firmware.
Notifications or the delayed responses on the other hand are originated
from the platform firmware and consumes by the OS. It's better to have
separate and dedicated pre-allocated buffers to handle the notifications.
We can still use the transmit buffers for the delayed responses.
In addition, let's prepare existing scmi_xfer_{get,put} for acquiring
and releasing a slot to identify the right(tx/rx) buffers.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With scmi_mbox_chan_setup enabled to identify and setup both Tx and Rx,
let's consolidate setting up of both the channels under the function
scmi_mbox_txrx_setup.
Since some platforms may opt not to support notifications or delayed
response, they may not need support for Rx. Hence Rx is optional and
failure of setting one up is not considered fatal.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The transmit(Tx) channels are specified as the first entry and the
receive(Rx) channels are the second entry as per the device tree
bindings. Since we currently just support Tx, index 0 is hardcoded at
all required callsites.
In order to prepare for adding Rx support, let's remove those hardcoded
index and add boolean parameter to identify Tx/Rx channels when setting
them up.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Re-shuffling few functions to keep definitions and their usages close.
This is also needed to avoid too many unnecessary forward declarations
while adding new features(delayed response and notifications).
Keeping this separate to avoid mixing up of these trivial change that
doesn't affect functionality into the ones that does.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sometimes platfom may take too long to respond to the command and OS
might timeout before platform transfer the ownership of the shared
memory region to the OS with the response.
Since the mailbox channel associated with the channel is freed and new
commands are dispatch on the same channel, OS needs to wait until it
gets back the ownership. If not, either OS may end up overwriting the
platform response for the last command(which is fine as OS timed out
that command) or platform might overwrite the payload for the next
command with the response for the old.
The latter is problematic as platform may end up interpretting the
response as the payload. In order to avoid such race, let's wait until
the OS gets back the ownership before we prepare the shared memory with
the payload for the next command.
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In preparation to adding support for other two types of messages that
SCMI specification mentions, let's replace the term 'command' with the
correct term 'message'.
As per the specification the messages are of 3 types:
commands(synchronous or asynchronous), delayed responses and notifications.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
While adding new comments found couple of typos that are better fixed.
s/informfation/information/
s/statues/status/
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
scmi_xfer_get_init ensures both transmit and receive buffer lengths are
within the maximum limits. If receive buffer length is not supplied by
the caller, it's set to the maximum limit value. Receive buffer length
is never modified after that. So there's no need for the extra check
when receive transmit completion for a command essage.
Further, if the response header length is greater than the prescribed
receive buffer length, the response buffer is truncated to the latter.
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Looks like more code developed during the draft versions of the
specification slipped through and they don't match the final
released version. This seem to have happened only with sensor
protocol.
Renaming few command and function names here to match exactly with
the released version of SCMI specification for ease of maintenance.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
- A driver for SCU (system control) on NXP i.MX8QXP
- Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
- Qualcomm PM support for MSM8998
- Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
- Reset controller support for Bitmain BM1880
- TI SCI (System Control Interface) support for CPU control on AM654
processors
- More TI sysc refactoring and rework
-----BEGIN PGP SIGNATURE-----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=ek+j
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
- A driver for SCU (system control) on NXP i.MX8QXP
- Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
- Qualcomm PM support for MSM8998
- Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
- Reset controller support for Bitmain BM1880
- TI SCI (System Control Interface) support for CPU control on AM654
processors
- More TI sysc refactoring and rework"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
reset: remove redundant null check on pointer dev
soc: rockchip: work around clang warning
dt-bindings: reset: imx7: Fix the spelling of 'indices'
soc: imx: Add i.MX8MN SoC driver support
soc: aspeed: lpc-ctrl: Fix probe error handling
soc: qcom: geni: Add support for ACPI
firmware: ti_sci: Fix gcc unused-but-set-variable warning
firmware: ti_sci: Use the correct style for SPDX License Identifier
soc: imx8: Use existing of_root directly
soc: imx8: Fix potential kernel dump in error path
firmware/psci: psci_checker: Park kthreads before stopping them
memory: move jedec_ddr.h from include/memory to drivers/memory/
memory: move jedec_ddr_data.c from lib/ to drivers/memory/
MAINTAINERS: Remove myself as qcom maintainer
soc: aspeed: lpc-ctrl: make parameter optional
soc: qcom: apr: Don't use reg for domain id
soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
memory: tegra: Fix -Wunused-const-variable
firmware: tegra: Early resume BPMP
soc/tegra: Select pinctrl for Tegra194
...
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for ARM SCMI
Message Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. Correction to ARM document ID referred in SCMI protocol binding
2. Fix to correct bitfield definitions for SENSOR_DESC attributes which
otherwise will calculate sensor values on wrong scale
3. Adds the missing rate_discrete flag setting so that discrete clocks
are handled correctly. Without this fix it assumes continuous range
which is incorrect
4. Adds support to read and scale the sensor values based on the factor
read from the firmware
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAl0A9jcACgkQAEG6vDF+
4pgW1Q/+LprgPlA2krfWlfBY85cku+N+intI8RCO1jVMDgQlFUVi82pTKlTEnp+F
9/qp2MMKbJWlJoT8Yte24WQtgqWTJkkZ6zA0kczh3lruqrcSeCfcA0s0uvHiWFup
tsOR7FlyLnALb86Pa9qXI921MDF2H/594rJUpKkQFoB418YlIAW1uCIfOPmqQgcc
i7grh6nOwYJ4pprg5zgltXqHGtv3vqBR1kCWl6Av48eB7mdmz7zMxmM1Hfka0HGn
ZFfjQE73gowJ+CZU8uSYn9JAY+nraUug/NX55J5w9kyAABKVtZmuJW+4+sQKmJ9S
05ODDcuBbsJmEDGEXggEr1XzRcpCxf6T5g2hwd6Am2ckBWvW5HdD/VBOjXXCogTh
t12ZLwfmsfUZTiz7s1St+YbHAZ47VtHcs6+t4vnkz27rJg988CYTNo/mes6iU05E
ynCg84crSYBA9316Q6bWgAriFnSRbRujXJH+S44PEU/1eNH+Ddutv6OvICY+jYuc
Ku1wkkyoeKVnYV2Mx7HVu3ij4AycLwspyBxEQLsW2SBVA50VI8aaUGEXnrdjCzYW
fadFzQjhzwTmGzzrvGUl0xrvxXdLVw0awRebO58pRh508xLwK11xnZthR9aRqgR7
mcE431L1xSDwFN0WaxJ197no5OGaAT8tZUIXS5WwNKfGsWjMD+w=
=RZCT
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI updates/fixes for v5.3
1. Correction to ARM document ID referred in SCMI protocol binding
2. Fix to correct bitfield definitions for SENSOR_DESC attributes which
otherwise will calculate sensor values on wrong scale
3. Adds the missing rate_discrete flag setting so that discrete clocks
are handled correctly. Without this fix it assumes continuous range
which is incorrect
4. Adds support to read and scale the sensor values based on the factor
read from the firmware
* tag 'scmi-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
hwmon: scmi: Scale values to target desired HWMON units
firmware: arm_scmi: fetch and store sensor scale
firmware: arm_scmi: update rate_discrete in clock_describe_rates_get
firmware: arm_scmi: fix bitfield definitions for SENSOR_DESC attributes
dt-bindings: arm: fix the document ID for SCMI protocol documentation
Signed-off-by: Olof Johansson <olof@lixom.net>
In preparation for dealing with scales within the SCMI HWMON driver,
fetch and store the sensor unit scale into the scmi_sensor_info
structure. In order to simplify computations for upper layer, take care
of sign extending the scale to a full 8-bit signed value.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[sudeep.holla: update bitfield values as per specification]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The boolean rate_discrete needs to be assigned to clk->rate_discrete,
so that clock driver can distinguish between the continuous range and
discrete rates. It uses this in scmi_clk_round_rate could get the
rounded value if it's a continuous range.
Fixes: 5f6c6430e9 ("firmware: arm_scmi: add initial support for clock protocol")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[sudeep.holla: updated commit message]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
As per the SCMI specification the bitfields for SENSOR_DESC attributes
are as follows:
attributes_low [7:0] Number of trip points supported
attributes_high [15:11] The power-of-10 multiplier in 2's-complement
format that is applied to the sensor units
Looks like the code developed during the draft versions of the
specification slipped through and are wrong with respect to final
released version. Fix them by adjusting the bitfields appropriately.
Fixes: 5179c523c1 ("firmware: arm_scmi: add initial support for sensor protocol")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_match_device can return NULL if no matching device is found though
it's highly unlikely to happen in scmi_probe as it's called only if
a valid match is found.
However we can use of_device_get_match_data() instead of
of_match_device()->data to handle NULL pointer checks and return -EINVAL
in such a scenario.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
of_parse_phandle_with_args() requires the caller to call of_node_put() on
the returned args->np pointer. Otherwise the reference count will remain
incremented.
However, in this case, since we don't actually use the returned pointer,
we can simply pass in NULL.
Fixes: aa4f886f38 ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The device/driver model clearly mandates that bus driver that discover
and allocate the device must set the release callback. This callback
will be used to free the device after all references have gone away.
scmi bus driver is missing the obvious callback which will result in
the following warning if the device is unregistered:
Device 'scmi_dev.1' does not have a release() function, it is broken and
must be fixed. See Documentation/kobject.txt.
WARNING at drivers/base/core.c:922 device_release+0x8c/0xa0
Hardware name: ARM LTD Juno Development Platform BIOS EDK II Jan 21 2019
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : device_release+0x8c/0xa0
lr : device_release+0x8c/0xa0
Call trace:
device_release+0x8c/0xa0
kobject_put+0x8c/0x208
device_unregister+0x30/0x78
scmi_device_destroy+0x28/0x50
scmi_probe+0x354/0x5b0
platform_drv_probe+0x58/0xa8
really_probe+0x2c4/0x3e8
driver_probe_device+0x12c/0x148
__device_attach_driver+0xac/0x150
bus_for_each_drv+0x78/0xd8
__device_attach+0xe0/0x168
device_initial_probe+0x24/0x30
bus_probe_device+0xa0/0xa8
deferred_probe_work_func+0x8c/0xe0
process_one_work+0x1f0/0x478
worker_thread+0x22c/0x450
kthread+0x134/0x138
ret_from_fork+0x10/0x1c
---[ end trace 420bdb7f6af50937 ]---
Fix the issue by providing scmi_device_release callback. We have
everything required for device release already in scmi_device_destroy,
so we just need to move freeing of the device to scmi_device_release.
Fixes: 933c504424 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SCMI protocol can be used to get power estimates from firmware
corresponding to each performance state of a device. Although these power
costs are already managed by the SCMI firmware driver, they are not
exposed to any external subsystem yet.
Fix this by adding a new get_power() interface to the exisiting perf_ops
defined for the SCMI protocol.
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Replace all the memcpy() for copying name strings from the firmware with
strlcpy() to make sure we are bounded by the source buffer size and we
also always have NULL-terminated strings.
This is needed to avoid out of bounds accesses if the firmware returns
a non-terminated string.
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Firmware can provide zero as values for sustained performance level and
corresponding sustained frequency in kHz in order to hide the actual
frequencies and provide only abstract values. It may endup with divide
by zero scenario resulting in kernel panic.
Let's set the multiplication factor to one if either one or both of them
(sustained_perf_level and sustained_freq) are set to zero.
Fixes: a9e3fbfaa0 ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The "pi->dom_info" buffer is allocated in init() and it can't be NULL
here. These tests are sort of weird as well because if "pi->dom_info"
was NULL but "domain" was non-zero then it would lead to an Oops.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This branch contains platform-related driver updates for ARM and ARM64.
Highlights:
- ARM SCMI (System Control & Management Interface) driver cleanups
- Hisilicon support for LPC bus w/ ACPI
- Reset driver updates for several platforms: Uniphier,
- Rockchip power domain bindings and hardware descriptions for several SoCs.
- Tegra memory controller reset improvements
-----BEGIN PGP SIGNATURE-----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=xs+f
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"This contains platform-related driver updates for ARM and ARM64.
Highlights:
- ARM SCMI (System Control & Management Interface) driver cleanups
- Hisilicon support for LPC bus w/ ACPI
- Reset driver updates for several platforms: Uniphier,
- Rockchip power domain bindings and hardware descriptions for
several SoCs.
- Tegra memory controller reset improvements"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits)
ARM: tegra: fix compile-testing PCI host driver
soc: rockchip: power-domain: add power domain support for px30
dt-bindings: power: add binding for px30 power domains
dt-bindings: power: add PX30 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3228
dt-bindings: power: add binding for rk3228 power domains
dt-bindings: power: add RK3228 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3128
dt-bindings: power: add binding for rk3128 power domains
dt-bindings: power: add RK3128 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3036
dt-bindings: power: add binding for rk3036 power domains
dt-bindings: power: add RK3036 SoCs header for power-domain
dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Register SMMU after MC driver became ready
soc: mediatek: remove unneeded semicolon
soc: mediatek: add a fixed wait for SRAM stable
soc: mediatek: introduce a CAPS flag for scp_domain_data
soc: mediatek: reuse regmap_read_poll_timeout helpers
...
This contains all of the trivial review comments that were not
addressed as the series was already queued up for v4.17 and were not
critical to go as fixes.
They generally just improve code readability, fix kernel-docs, remove
unused/unnecessary code, follow standard function naming and simplifies
certain exit paths.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OzDu
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers
SCMI cleanups for v4.18
This contains all of the trivial review comments that were not
addressed as the series was already queued up for v4.17 and were not
critical to go as fixes.
They generally just improve code readability, fix kernel-docs, remove
unused/unnecessary code, follow standard function naming and simplifies
certain exit paths.
* tag 'scmi-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: simplify exit path by returning on error
firmware: arm_scmi: improve exit paths and code readability
firmware: arm_scmi: remove unnecessary bitmap_zero
firmware: arm_scmi: drop unused `con_priv` structure member
firmware: arm_scmi: rename scmi_xfer_{init,get,put}
firmware: arm_scmi: rename get_transition_latency and add_opps_to_device
firmware: arm_scmi: fix kernel-docs documentation
firmware: arm_scmi: improve code readability using bitfield accessor macros
Signed-off-by: Olof Johansson <olof@lixom.net>
A single patch to ensure that the scmi device is not used for setting up
scmi handle after it's freed(fixes use after free).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UOAO
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes
SCMI fix for v4.17
A single patch to ensure that the scmi device is not used for setting up
scmi handle after it's freed(fixes use after free).
* tag 'scmi-fixes-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use after free in scmi_create_protocol_device()
Signed-off-by: Olof Johansson <olof@lixom.net>
Yet another nasty indentation left out during code restructuring. It's
must simpler to return on error instead of having unnecessary indentation.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The existing code intends the good path to reduce the code which is so
uncommon. It's obvious to have more readable code with a goto used for
the error path. This patch adds more appropriate error paths and makes
code more readable. It also moves a error logging outside the scope of
locking.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
kcalloc zeros the memory and it's totally unnecessary to zero the bitmap
again using bitmap_zero. This patch just drops the unnecessary use of
the bitmap_zero in the context.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Initially con_priv was supposedly used for transport specific data when
the SCMI driver had an abstraction to communicate with different mailbox
controllers. But after some discussions, the idea was dropped but this
variable slipped through the cracks.
This patch gets rid of this unused variable.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Just after the initial patches were queued, Jonathan Cameron mentioned
that scmi_one_xfer_{get_put} were not very clear and suggested to use
scmi_xfer_{alloc,free}. While I agree to some extent, the reason not to
have alloc/free as these are preallocated buffers and these functions
just returns a reference to free slot in that preallocated array.
However it was agreed to drop "_one" as it's implicit that we are always
dealing with one slot anyways.
This patch updates the name accordingly dropping "_one" in both {get,put}
functions. Also scmi_one_xfer_init is renamed as scmi_xfer_get_init to
reflect the fact that it gets the free slots and then initialise it.
Reported-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Most of the scmi code follows the suggestion from Greg KH on a totally
different thread[0] to have the subsystem name first, followed by the
noun and finally the verb with couple of these exceptions.
This patch fixes them so that all the functions names are aligned to
that practice.
[0] https://www.spinics.net/lists/arm-kernel/msg583673.html
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There are few missing descriptions for function parameters and structure
members along with certain instances where excessive function parameters
or structure members are described.
This patch fixes all of those warnings.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
By using FIELD_{FIT,GET,PREP} and GENMASK macro accessors we can avoid
some clumpsy custom shifting and masking macros and also improve the
code better readability.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We need to return here instead of setting up the freed sdev device as a
transport.
Fixes: 907b6d1491 ("firmware: arm_scmi: add per-protocol channels support using idr objects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The null check on clk->name is redundant since name is a char array
and can never be null, so the check is always true. Remove it.
Detected by CoverityScan, CID#1466117 ("Array compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
gcc-5.3 and earlier warns that rate_discrete maybe-uninitialized
../drivers/firmware/arm_scmi/clock.c:185:5: warning: 'rate_discrete'
may be used uninitialized in this function [-Wmaybe-uninitialized]
if (rate_discrete)
^
../drivers/firmware/arm_scmi/clock.c:128:7: note:
'rate_discrete' was declared here
bool rate_discrete;
^
This patch fixing the warning by initialising rate_discrete and also using
goto label for the error path.
Fixes: 5f6c6430e9 ("firmware: arm_scmi: add initial support for clock protocol")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[sudeep.holla: added one line description to the commit message]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This patch hooks up the support for device power domain provided by
SCMI using the Linux generic power domain infrastructure.
Cc: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In order to maintain the channel information per protocol, we need
some sort of list or hashtable to hold all this information. IDR
provides sparse array mapping of small integer ID numbers onto arbitrary
pointers. In this case the arbitrary pointers can be pointers to the
channel information.
This patch adds support for per-protocol channels using those idr
objects.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
