We still have this oddity of stashing the io_failure_record in the
extent state for the io_failure_tree, which is leftover from when we
used to stuff private pointers in extent_io_trees.
However this doesn't make a lot of sense for the io failure records, we
can simply use a normal rb_tree for this. This will allow us to further
simplify the extent_io_tree code by removing the io_failure_rec pointer
from the extent state.
Convert the io_failure_tree to an rb tree + spinlock in the inode, and
then use our rb tree simple helpers to insert and find failed records.
This greatly cleans up this code and makes it easier to separate out the
extent_io_tree code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
volumes.c is the place that implements the storage layer using the
btrfs_bio structure, so move the bio_set and allocation helpers there
as well.
To make up for the new initialization boilerplate, merge the two
init/exit helpers in extent_io.c into a single one.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the checksum of compressed extents is verified based on the
compressed data and the lower btrfs_bio, but the actual repair process
is driven by end_bio_extent_readpage on the upper btrfs_bio for the
decompressed data.
This has a bunch of issues, including not being able to properly
communicate the failed mirror up in case that the I/O submission got
preempted, a general loss of if an error was an I/O error or a checksum
verification failure, but most importantly that this design causes
btrfs_clean_io_failure to eventually write back the uncompressed good
data onto the disk sectors that are supposed to contain compressed data.
Fix this by moving the repair to the lower btrfs_bio. To do so, a fair
amount of code has to be reshuffled:
a) the lower btrfs_bio now needs a valid csum pointer. The easiest way
to achieve that is to pass NULL btrfs_lookup_bio_sums and just use
the btrfs_bio management of csums. For a compressed_bio that is
split into multiple btrfs_bios this means additional memory
allocations, but the code becomes a lot more regular.
b) checksum verification now runs directly on the lower btrfs_bio instead
of the compressed_bio. This actually nicely simplifies the end I/O
processing.
c) btrfs_repair_one_sector can't just look up the logical address for
the file offset any more, as there is no corresponding relative
offsets that apply to the file offset and the logic address for
compressed extents. Instead require that the saved bvec_iter in the
btrfs_bio is filled out for all read bios and use that, which again
removes a fair amount of code.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass the btrfs_bio instead of the plain bio to btrfs_repair_one_sector,
and remove the start and failed_mirror arguments in favor of deriving
them from the btrfs_bio. For this to work ensure that the file_offset
field is also initialized for buffered I/O.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When there is more than a single level of redundancy there can also be
multiple bad mirrors, and the current read repair code only repairs the
last bad one.
Restructure btrfs_repair_one_sector so that it records the originally
failed mirror and the number of copies, and then repair all known bad
copies until we reach the originally failed copy in clean_io_failure.
Note that this also means the read repair reads will always start from
the next bad mirror and not mirror 0.
This fixes btrfs/265 in xfstests.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Same as in commit 21b4ee7029 ("xfs: drop ->writepage completely"): we
can remove the callback as it's only used in one place - single page
writeback from memory reclaim and is not called for cgroup writeback at
all.
We only allow such writeback from kswapd, not from direct memory
reclaim, and so it is rarely used. When it comes from kswapd, it is
effectively random dirty page shoot-down, which is horrible for IO
patterns. We can rely on background writeback to clean all dirty pages
in an efficient way and not let it be interrupted by kswapd.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The bios submitted from btrfs_map_bio don't really interact with the
rest of btrfs and the only btrfs_bio member actually used in the
low-level bios is the pointer to the btrfs_io_context used for endio
handler.
Use a union in struct btrfs_io_stripe that allows the endio handler to
find the btrfs_io_context and remove the spurious ->device assignment
so that a plain fs_bio_set bio can be used for the low-level bios
allocated inside btrfs_map_bio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first argument
like ->read_folio
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmKNMDUACgkQDpNsjXcp
gj4/mwf/bpHhXH4ZoNIvtUpTF6rZbqeffmc0VrbxCZDZ6igRnRPglxZ9H9v6L53O
7B0FBQIfxgNKHZpdqGdOkv8cjg/GMe/HJUbEy5wOakYPo4L9fZpHbDZ9HM2Eankj
xBqLIBgBJ7doKr+Y62DAN19TVD8jfRfVtli5mqXJoNKf65J7BkxljoTH1L3EXD9d
nhLAgyQjR67JQrT/39KMW+17GqLhGefLQ4YnAMONtB6TVwX/lZmigKpzVaCi4r26
bnk5vaR/3PdjtNxIoYvxdc71y2Eg05n2jEq9Wcy1AaDv/5vbyZUlZ2aBSaIVbtKX
WfrhN9O3L0bU5qS7p9PoyfLc9wpq8A==
=djLv
-----END PGP SIGNATURE-----
Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
Commit be1a1d7a5d ("btrfs: zoned: finish fully written block group")
introduced zone finishing code both for data and metadata end_io path.
However, the metadata side is not working as it should. First, it
compares logical address (eb->start + eb->len) with offset within a
block group (cache->zone_capacity) in submit_eb_page(). That essentially
disabled zone finishing on metadata end_io path.
Furthermore, fixing the issue above revealed we cannot call
btrfs_zone_finish_endio() in end_extent_buffer_writeback(). We cannot
call btrfs_lookup_block_group() which require spin lock inside end_io
context.
Introduce btrfs_schedule_zone_finish_bg() to wait for the extent buffer
writeback and do the zone finish IO in a workqueue.
Also, drop EXTENT_BUFFER_ZONE_FINISH as it is no longer used.
Fixes: be1a1d7a5d ("btrfs: zoned: finish fully written block group")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Several functions take parameter bio_flags that was simplified to just
compress type, unify it and change the type accordingly.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio_flags is now used to store unchanged compress type, so unify
that.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers extent_set_compress_type and extent_compress_type have
become trivial after previous cleanups and can be removed.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio_flags are used only to encode the compression and there are no
other EXTENT_BIO_* flags, so the compress type can be stored directly.
The struct member name is left unchanged and will be cleaned in later
patches.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both btrfs_repair_one_sector and submit_bio_one as the direct caller of
one of the instances ignore errors as they expect the methods themselves
to call ->bi_end_io on error. Remove the unused and dangerous return
value.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep btrfs_readpage next to btrfs_do_readpage and the other address
space operations. This allows to keep submit_one_bio and
struct btrfs_bio_ctrl file local in extent_io.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running generic/475 with 64K page size and 4K sector size, it has a
very high chance (almost 100%) to hang, with mostly data page locked but
no one is going to unlock it.
[CAUSE]
With commit 1784b7d502 ("btrfs: handle csum lookup errors properly on
reads"), if we failed to lookup checksum due to metadata IO error, we
will return error for btrfs_submit_data_bio().
This will cause the page to be unlocked twice in btrfs_do_readpage():
btrfs_do_readpage()
|- submit_extent_page()
| |- submit_one_bio()
| |- btrfs_submit_data_bio()
| |- if (ret) {
| |- bio->bi_status = ret;
| |- bio_endio(bio); }
| In the endio function, we will call end_page_read()
| and unlock_extent() to cleanup the subpage range.
|
|- if (ret) {
|- unlock_extent(); end_page_read() }
Here we unlock the extent and cleanup the subpage range
again.
For unlock_extent(), it's mostly double unlock safe.
But for end_page_read(), it's not, especially for subpage case,
as for subpage case we will call btrfs_subpage_end_reader() to reduce
the reader number, and use that to number to determine if we need to
unlock the full page.
If double accounted, it can underflow the number and leave the page
locked without anyone to unlock it.
[FIX]
The commit 1784b7d502 ("btrfs: handle csum lookup errors properly on
reads") itself is completely fine, it's our existing code not properly
handling the error from bio submission hook properly.
This patch will make submit_one_bio() to return void so that the callers
will never be able to do cleanup when bio submission hook fails.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass the block_device to bio_alloc_clone instead of setting it later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Several functions currently populate an array of page pointers one
allocated page at a time. Factor out the common code so as to allow
improvements to all of the sites at once.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.
Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M. For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.
The following example test script reproduces the problem:
$ cat qgroup-overflow.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Set qgroup limit to 2GiB.
btrfs quota enable $MNT
btrfs qgroup limit 2G $MNT
# Try to fallocate a 3GiB file. This should fail.
echo
echo "Try to fallocate a 3GiB file..."
fallocate -l 3G $MNT/3G.file
# Try to fallocate a 5GiB file.
echo
echo "Try to fallocate a 5GiB file..."
fallocate -l 5G $MNT/5G.file
# See we break the qgroup limit.
echo
sync
btrfs qgroup show -r $MNT
umount $MNT
When running the test:
$ ./qgroup-overflow.sh
(...)
Try to fallocate a 3GiB file...
fallocate: fallocate failed: Disk quota exceeded
Try to fallocate a 5GiB file...
qgroupid rfer excl max_rfer
-------- ---- ---- --------
0/5 5.00GiB 5.00GiB 2.00GiB
Since we have no control of how bytes_changed is used, it's better to
set it to u64.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several cleanups for extent_write_locked_range(), most of them
are pure cleanups, but with some preparation for future subpage support.
- Add a proper comment for which call sites are suitable
Unlike regular synchronized extent write back, if async COW or zoned
COW happens, we have all pages in the range still locked.
Thus for those (only) two call sites, we need this function to submit
page content into bios and submit them.
- Remove @mode parameter
All the existing two call sites pass WB_SYNC_ALL. No need for @mode
parameter.
- Better error handling
Currently if we hit an error during the page iteration loop, we
overwrite @ret, causing only the last error can be recorded.
Here we add @found_error and @first_error variable to record if we hit
any error, and the first error we hit.
So the first error won't get lost.
- Don't reuse @start as the cursor
We reuse the parameter @start as the cursor to iterate the range, not
a big problem, but since we're here, introduce a proper @cur as the
cursor.
- Remove impossible branch
Since all pages are still locked after the ordered extent is inserted,
there is no way that pages can get its dirty bit cleared.
Remove the branch where page is not dirty and replace it with an
ASSERT().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.
With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.
The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.
This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.
We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper btrfs_bio_alloc() is almost the same as btrfs_io_bio_alloc(),
except it's allocating using BIO_MAX_VECS as @nr_iovecs, and initializes
bio->bi_iter.bi_sector.
However the naming itself is not using "btrfs_io_bio" to indicate its
parameter is "strcut btrfs_io_bio" and can be easily confused with
"struct btrfs_bio".
Considering assigned bio->bi_iter.bi_sector is such a simple work and
there are already tons of call sites doing that manually, there is no
need to do that in a helper.
Remove btrfs_bio_alloc() helper, and enhance btrfs_io_bio_alloc()
function to provide a fail-safe value for its @nr_iovecs.
And then replace all btrfs_bio_alloc() callers with
btrfs_io_bio_alloc().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function repair_io_failure() is no longer used out of extent_io.c since
commit 8b9b6f2554 ("btrfs: scrub: cleanup the remaining nodatasum
fixup code"), which removes the last external caller.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have written to the zone capacity, the device automatically
deactivates the zone. Sync up block group side (the active BG list and
zone_is_active flag) with it.
We need to do it both on data BGs and metadata BGs. On data side, we add a
hook to btrfs_finish_ordered_io(). On metadata side, we use
end_extent_buffer_writeback().
To reduce excess lookup of a block group, we mark the last extent buffer in
a block group with EXTENT_BUFFER_ZONE_FINISH flag. This cannot be done for
data (ordered_extent), because the address may change due to
REQ_OP_ZONE_APPEND.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The offset and can never be negative use unsigned int instead of int
type for them.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside btrfs we use Private2 page status to indicate we have an ordered
extent with pending IO for the sector.
But the page status name, Private2, tells us nothing about the bit
itself, so this patch will rename it to Ordered.
And with extra comment about the bit added, so reader who is still
uncertain about the page Ordered status, will find the comment pretty
easily.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a lot of code inside extent_io.c needs both "struct bio
**bio_ret" and "unsigned long prev_bio_flags", along with some
parameters like "unsigned long bio_flags".
Such strange parameters are here for bio assembly.
For example, we have such inode page layout:
0 4K 8K 12K
|<-- Extent A-->|<- EB->|
Then what we do is:
- Page [0, 4K)
*bio_ret = NULL
So we allocate a new bio to bio_ret,
Add page [0, 4K) to *bio_ret.
- Page [4K, 8K)
*bio_ret != NULL
We found this page is continuous to *bio_ret,
and if we're not at stripe boundary, we
add page [4K, 8K) to *bio_ret.
- Page [8K, 12K)
*bio_ret != NULL
But we found this page is not continuous, so
we submit *bio_ret, then allocate a new bio,
and add page [8K, 12K) to the new bio.
This means we need to record both the bio and its bio_flag, but we
record them manually using those strange parameter list, other than
encapsulating them into their own structure.
So this patch will introduce a new structure, btrfs_bio_ctrl, to record
both the bio, and its bio_flags.
Also, in above case, for all pages added to the bio, we need to check if
the new page crosses stripe boundary. This check itself can be time
consuming, and we don't really need to do that for each page.
This patch also integrates the stripe boundary check into btrfs_bio_ctrl.
When a new bio is allocated, the stripe and ordered extent boundary is
also calculated, so no matter how large the bio will be, we only
calculate the boundaries once, to save some CPU time.
The following functions/structures are affected:
- struct extent_page_data
Replace its bio pointer with structure btrfs_bio_ctrl (embedded
structure, not pointer)
- end_write_bio()
- flush_write_bio()
Just change how bio is fetched
- btrfs_bio_add_page()
Use pre-calculated boundaries instead of re-calculating them.
And use @bio_ctrl to replace @bio and @prev_bio_flags.
- calc_bio_boundaries()
New function
- submit_extent_page() callers
- btrfs_do_readpage() callers
- contiguous_readpages() callers
To Use @bio_ctrl to replace @bio and @prev_bio_flags, and how to grab
bio.
- btrfs_bio_fits_in_ordered_extent()
Removed, as now the ordered extent size limit is done at bio
allocation time, no need to check for each page range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The io_failure_record::in_validation was introduced to handle failed bio
which cross several sectors. In such case, we still need to verify
which sectors are corrupted.
But since we've changed the way how we handle corrupted sectors, by only
submitting repair for each corrupted sector, there is no need for extra
validation any more.
This patch will cleanup all io_failure_record::in_validation related
code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_submit_read_repair() has some extra check on whether the
failed bio needs extra validation for repair. But we can avoid all
these extra mechanisms if we submit the repair for each sector.
By this, each read repair can be easily handled without the need to
verify which sector is corrupted.
This will also benefit subpage, as one subpage bvec can contain several
sectors, making the extra verification more complex.
So this patch will:
- Introduce repair_one_sector()
The main code submitting repair, which is more or less the same as old
btrfs_submit_read_repair().
But this time, it only repairs one sector.
- Make btrfs_submit_read_repair() to handle sectors differently
There are 3 different cases:
* Good sector
We need to release the page and extent, set the range uptodate.
* Bad sector and failed to submit repair bio
We need to release the page and extent, but not set the range
uptodate.
* Bad sector but repair bio submitted
The page and extent release will be handled by the submitted repair
bio. Nothing needs to be done.
Since btrfs_submit_read_repair() will handle the page and extent
release now, we need to skip to next bvec even we hit some error.
- Change the lifespan of @uptodate in end_bio_extent_readpage()
Since now btrfs_submit_read_repair() will handle the full bvec
which contains any corruption, we don't need to bother updating
@uptodate bit anymore.
Just let @uptodate to be local variable inside the main loop,
so that any error from one bvec won't affect later bvec.
- Only export btrfs_repair_one_sector(), unexport
btrfs_submit_read_repair()
The only outside caller for read repair is DIO, which already submits
its repair for just one sector.
Only export btrfs_repair_one_sector() for DIO.
This patch will focus on the change on the repair path, the extra
validation code is still kept as is, and will be cleaned up later.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two forward declarations deep in extent_io.h, move them
to the beginning and remove the duplicate one.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tree manipulating operations like merging nodes often release
once-allocated tree nodes. Such nodes are cleaned so that pages in the
node are not uselessly written out. On zoned volumes, however, such
optimization blocks the following IOs as the cancellation of the write
out of the freed blocks breaks the sequential write sequence expected by
the device.
Introduce a list of clean and unwritten extent buffers that have been
released in a transaction. Redirty the buffers so that
btree_write_cache_pages() can send proper bios to the devices.
Besides it clears the entire content of the extent buffer not to confuse
raw block scanners e.g. 'btrfs check'. By clearing the content,
csum_dirty_buffer() complains about bytenr mismatch, so avoid the
checking and checksum using newly introduced buffer flag
EXTENT_BUFFER_NO_CHECK.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To support subpage sector size, data also need extra info to make sure
which sectors in a page are uptodate/dirty/...
This patch will make pages for data inodes get btrfs_subpage structure
attached, and detached when the page is freed.
This patch also slightly changes the timing when
set_page_extent_mapped() is called to make sure:
- We have page->mapping set
page->mapping->host is used to grab btrfs_fs_info, thus we can only
call this function after page is mapped to an inode.
One call site attaches pages to inode manually, thus we have to modify
the timing of set_page_extent_mapped() a bit.
- As soon as possible, before other operations
Since memory allocation can fail, we have to do extra error handling.
Calling set_page_extent_mapped() as soon as possible can simply the
error handling for several call sites.
The idea is pretty much the same as iomap_page, but with more bitmaps
for btrfs specific cases.
Currently the plan is to switch iomap if iomap can provide sector
aligned write back (only write back dirty sectors, but not the full
page, data balance require this feature).
So we will stick to btrfs specific bitmap for now.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
PAGE_CLEAR_DIRTY and PAGE_SET_WRITEBACK are two defines used in
__process_pages_contig(), to let the function know to clear page dirty
bit and then set page writeback.
However page writeback and dirty bits are conflicting (at least for
sector size == PAGE_SIZE case), this means these two have to be always
updated together.
This means we can merge PAGE_CLEAR_DIRTY and PAGE_SET_WRITEBACK to
PAGE_START_WRITEBACK.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For subpage sized extent buffer, we have ensured no extent buffer will
cross page boundary, thus we would only need one page for any extent
buffer.
Update function num_extent_pages to handle such case. Now
num_extent_pages() returns 1 for subpage sized extent buffer.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs only support 64K as maximum node size, thus for 4K page system, we
would have at most 16 pages for one extent buffer.
For a system using 64K page size, we would really have just one page.
While we always use 16 pages for extent_buffer::pages, this means for
systems using 64K pages, we are wasting memory for 15 page pointers
which will never be used.
Calculate the array size based on page size and the node size maximum.
- for systems using 4K page size, it will stay 16 pages
- for systems using 64K page size, it will be 1 page
Move the definition of BTRFS_MAX_METADATA_BLOCKSIZE to btrfs_tree.h, to
avoid circular inclusion of ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Parameter icsum for check_data_csum() is a little hard to understand.
So is the phy_offset for btrfs_verify_data_csum().
Both parameters are calculated values for csum lookup.
Instead of some calculated value, just pass bio_offset and let the
final and only user, check_data_csum(), calculate whatever it needs.
Since we are here, also make the bio_offset parameter and some related
variables to be u32 (unsigned int).
As bio size is limited by its bi_size, which is unsigned int, and has
extra size limit check during various bio operations.
Thus we are ensured that bio_offset won't overflow u32.
Thus for all involved functions, not only rename the parameter from
@phy_offset to @bio_offset, but also reduce its width to u32, so we
won't have suspicious "u32 = u64 >> sector_bits;" lines anymore.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter bio_offset of extent_submit_bio_start_t is very confusing.
If it's really bio_offset (offset to bio), then it should be u32. But
in fact, it's only utilized by dio read, and that member is used as file
offset, which must be u64.
Rename it to dio_file_offset since the only user uses it as file offset,
and add comment for who is using it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the type is unsigned int which could change its width
depending on the architecture. We need up to 32 bits so make it
explicit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It is unused everywhere now, it can be removed.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've plumbed all of the callers to have the owner root and the
level, plumb it down into alloc_extent_buffer().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're going to pass around more information when we allocate extent
buffers, in order to make that cleaner how we do readahead. Most of the
callers have the parent node that we're getting our blockptr from, with
the sole exception of relocation which simply has the bytenr it wants to
read.
Add a helper that takes the current arguments that we need (bytenr and
gen), and add another helper for simply reading the slot out of a node.
In followup patches the helper that takes all the extra arguments will
be expanded, and the simpler helper won't need to have it's arguments
adjusted.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers of btrfs_wq_submit_bio() pass struct inode as @private_data,
so there is no need for it to be (void *), replace it with "struct inode
*inode".
While we can extract fs_info from struct inode, also remove the @fs_info
parameter.
Since we're here, also replace all the (void *private_data) into (struct
inode *inode).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree. For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon. At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.
However now the opposite is the case. There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order. This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases. The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.
The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.
So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything. This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions. The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree. However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):
dbench 200 baseline
Throughput 216.056 MB/sec 200 clients 200 procs max_latency=1471.197 ms
dbench 200 with patch
Throughput 737.188 MB/sec 200 clients 200 procs max_latency=714.346 ms
Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking
fs_mark -d /d[0-15] -S 0 -L 20 -n 100000 -s 0 -t 16
baseline
Average Files/sec: 160166.7
p50 Files/sec: 165832
p90 Files/sec: 123886
p99 Files/sec: 123495
real 3m26.527s
user 2m19.223s
sys 48m21.856s
patched
Average Files/sec: 164135.7
p50 Files/sec: 171095
p90 Files/sec: 122889
p99 Files/sec: 113819
real 3m29.660s
user 2m19.990s
sys 44m12.259s
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used just remove the function and any related code which
was initialising it for inodes. No functional changes.
Removing 8 bytes from extent_io_tree in turn reduces size of other
structures where it is embedded, notably btrfs_inode where it reduces
size by 24 bytes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used so let's remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This makes reading the code a tad easier by decreasing the level of
indirection by one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's always set to 0 by its sole caller - btrfs_readpage. Simply remove
it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's always set to 0 from the sole caller - btrfs_readpage.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
