for the TI Davinci family of SoCs. So far those clks have been supported
with a custom implementation of the clk API in the arch port instead of in
the CCF. With this driver merged we're one step closer to having a single
clk API implementation.
The other large diff is from the Amlogic clk driver that underwent some
major surgery to use regmap. Beyond that, the biggest hitter is Samsung
which needed some reworks to properly handle clk provider power domains
and a bunch of PLL rate updates.
The core framework was fairly quiet this round, just getting some cleanups
and small fixes for some of the more esoteric features. And the usual
set of driver non-critical fixes, cleanups, and minor additions are here as
well.
Core:
- Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
- debugfs ops macroized to shave some lines of boilerplate code
- Always calculate the phase instead of caching it in clk_get_phase()
- More __must_check on bulk clk APIs
New Drivers:
- TI's Davinci family of SoCs
- Intel's Stratix10 SoC
- stm32mp157 SoC
- Allwinner H6 CCU
- Silicon Labs SI544 clock generator chip
- Renesas R-Car M3-N and V3H SoCs
- i.MX6SLL SoCs
Removed Drivers:
- ST-Ericsson AB8540/9540
Updates:
- Mediatek MT2701 and MT7622 audsys support and MT2712 updates
- STM32F469 DSI and STM32F769 sdmmc2 support
- GPIO clks can sleep now
- Spreadtrum SC9860 RTC clks
- Nvidia Tegra MBIST workarounds and various minor fixes
- Rockchip phase handling fixes and a memory leak plugged
- Renesas drivers switch to readl/writel from clk_readl/clk_writel
- Renesas gained CPU (Z/Z2) and watchdog support
- Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
- Qualcomm PM8921 PMIC XO buffers
- Amlogic migrates to regmap APIs
- TI Keystone clk latching support
- Allwinner H3 and H5 video clk fixes
- Broadcom BCM2835 PLLs needed another bit to enable
- i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
- i.MX6UL/ULL epdc_podf support
- Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy
Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy
/xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF
MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL
61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+
/FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf
NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K
blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD
wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl
+EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb
Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf
X6P2pfkBqkg=
=ys4O
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The large diff this time around is from the addition of a new clk
driver for the TI Davinci family of SoCs. So far those clks have been
supported with a custom implementation of the clk API in the arch port
instead of in the CCF. With this driver merged we're one step closer
to having a single clk API implementation.
The other large diff is from the Amlogic clk driver that underwent
some major surgery to use regmap. Beyond that, the biggest hitter is
Samsung which needed some reworks to properly handle clk provider
power domains and a bunch of PLL rate updates.
The core framework was fairly quiet this round, just getting some
cleanups and small fixes for some of the more esoteric features. And
the usual set of driver non-critical fixes, cleanups, and minor
additions are here as well.
Core:
- Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
- debugfs ops macroized to shave some lines of boilerplate code
- Always calculate the phase instead of caching it in clk_get_phase()
- More __must_check on bulk clk APIs
New Drivers:
- TI's Davinci family of SoCs
- Intel's Stratix10 SoC
- stm32mp157 SoC
- Allwinner H6 CCU
- Silicon Labs SI544 clock generator chip
- Renesas R-Car M3-N and V3H SoCs
- i.MX6SLL SoCs
Removed Drivers:
- ST-Ericsson AB8540/9540
Updates:
- Mediatek MT2701 and MT7622 audsys support and MT2712 updates
- STM32F469 DSI and STM32F769 sdmmc2 support
- GPIO clks can sleep now
- Spreadtrum SC9860 RTC clks
- Nvidia Tegra MBIST workarounds and various minor fixes
- Rockchip phase handling fixes and a memory leak plugged
- Renesas drivers switch to readl/writel from clk_readl/clk_writel
- Renesas gained CPU (Z/Z2) and watchdog support
- Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
- Qualcomm PM8921 PMIC XO buffers
- Amlogic migrates to regmap APIs
- TI Keystone clk latching support
- Allwinner H3 and H5 video clk fixes
- Broadcom BCM2835 PLLs needed another bit to enable
- i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
- i.MX6UL/ULL epdc_podf support
- Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits)
clk: davinci: add a reset lookup table for psc0
clk: imx: add clock driver for imx6sll
dt-bindings: imx: update clock doc for imx6sll
clk: imx: add new gate/gate2 wrapper funtion
clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
clk: cs2000: set pm_ops in hibernate-compatible way
clk: bcm2835: De-assert/assert PLL reset signal when appropriate
clk: imx7d: Move clks_init_on before any clock operations
clk: imx7d: Correct ahb clk parent select
clk: imx7d: Correct dram pll type
clk: imx7d: Add USB clock information
clk: socfpga: stratix10: add clock driver for Stratix10 platform
dt-bindings: documentation: add clock bindings information for Stratix10
clk: ti: fix flag space conflict with clkctrl clocks
clk: uniphier: add additional ethernet clock lines for Pro4
clk: uniphier: add SATA clock control support
clk: uniphier: add PCIe clock control support
clk: Add driver for the si544 clock generator chip
clk: davinci: Remove redundant dev_err calls
clk: uniphier: add ethernet clock control support for PXs3
...
This set of changes adds support for more generations of the RCar
controller as well as runtime PM support. The JZ4740 driver gains
support for device tree and can now be used on all Ingenic SoCs.
Rounding things off is a random assortment of fixes and cleanups
all across the board.
-----BEGIN PGP SIGNATURE-----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=JiRM
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes adds support for more generations of the RCar
controller as well as runtime PM support. The JZ4740 driver gains
support for device tree and can now be used on all Ingenic SoCs.
Rounding things off is a random assortment of fixes and cleanups all
across the board"
* tag 'pwm/for-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (29 commits)
pwm: rcar: Add suspend/resume support
pwm: rcar: Use PM Runtime to control module clock
dt-bindings: pwm: rcar: Add bindings for R-Car M3N support
pwm: rcar: Fix a condition to prevent mismatch value setting to duty
pwm: sysfs: Use put_device() instead of kfree()
dt-bindings: pwm: sunxi: Add new compatible strings
pwm: sun4i: Simplify controller mapping
pwm: sun4i: Drop unused .has_rdy member
pwm: sun4i: Properly check current state
pwm: Remove depends on AVR32
pwm: stm32: LPTimer: Use 3 cells ->of_xlate()
dt-bindings: pwm-stm32-lp: Add #pwm-cells
pwm: stm32: Protect common prescaler for all channels
pwm: stm32: Remove unused struct device
pwm: mediatek: Improve precision in rate calculation
pwm: mediatek: Remove redundant MODULE_ALIAS entries
pwm: mediatek: Fix up PWM4 and PWM5 malfunction on MT7623
pwm: jz4740: Enable for all Ingenic SoCs
pwm: jz4740: Add support for devicetree
pwm: jz4740: Implement ->set_polarity()
...
- add base infrastructure for socket mediation. ABI bump and
additional checks to ensure only v8 compliant policy uses
socket af mediation.
- improve and cleanup dfa verification
- improve profile attachment logic
- improve overlapping expression handling
- add the xattr matching to the attachment logic
- improve signal mediation handling with stacked labels
- improve handling of no_new_privs in a label stack
+ Cleanups and changes
- use dfa to parse string split
- bounded version of label_parse
- proper line wrap nulldfa.in
- split context out into task and cred naming to better match usage
- simplify code in aafs
+ Bug fixes
- fix display of .ns_name for containers
- fix resource audit messages when auditing peer
- fix logging of the existence test for signals
- fix resource audit messages when auditing peer
- fix display of .ns_name for containers
- fix an error code in verify_table_headers()
- fix memory leak on buffer on error exit path
- fix error returns checks by making size a ssize_t
-----BEGIN PGP SIGNATURE-----
iQIcBAABCgAGBQJazWpMAAoJEAUvNnAY1cPY2wwP/2ZmzyITY7xW3Cpz8ynKOTyZ
hD2ahIjLWxcQwMZUoHXIa4TTK5EThlhKcTa0+sdMJGsIsRyXLoyBcd/VST0F9ZrA
OWn1uL2ASeNroNw+88P6qU03+cT2eEohM3vvlNy2ud98EBiTyxB6L4VLpy3xDKAd
zblojxqegRO7WRfEFCR2kHmnrL0Z3oxPBahnuVitfrwO76WFUSM9EYm67Xtf4yjJ
qQ7ocGdhxiULNdceoIke11e8iNwiQyY4O+E24qVAJw66arxIByMKo+cLjeTxMbZR
z4/pVd664wiK7mW0In7bJWOfXLJHxHALpuCc82wFgiLPdfSpJzT1nx+Xjaw8DhdZ
FBoHLpHjJT3dTpYoQTjqtNdvHgXryL/OOllm+I8DPMu/nfcp8qsOru5bEXg+j/90
CRo1OqrWZhUkKHnQs12QIJS+Gt7qByQB6tDMDbjkIC71vKUWA4wnp7zLZHYd9T0L
6kZ2aWKiOXM6VRZ5V5HVLhrTajiubyBg3y3Eur4HwuGzquBmxAp1RhS8oiOpgzgW
jVI92/P2XjhnU9E2J5m+mzjh11i+D51homtz1y4vB53Ye/WLy1S0o4StDAiLfgw3
q/581V342vl6X46GlgcS5G7QeIkzFiCUe5H3t2/unCRnI+PxabwRmbaTqWq47xzQ
umwlYfok3ALSzdgnv2sT
=XhxG
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2018-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features:
- add base infrastructure for socket mediation. ABI bump and
additional checks to ensure only v8 compliant policy uses socket af
mediation.
- improve and cleanup dfa verification
- improve profile attachment logic
- improve overlapping expression handling
- add the xattr matching to the attachment logic
- improve signal mediation handling with stacked labels
- improve handling of no_new_privs in a label stack
Cleanups and changes:
- use dfa to parse string split
- bounded version of label_parse
- proper line wrap nulldfa.in
- split context out into task and cred naming to better match usage
- simplify code in aafs
Bug fixes:
- fix display of .ns_name for containers
- fix resource audit messages when auditing peer
- fix logging of the existence test for signals
- fix resource audit messages when auditing peer
- fix display of .ns_name for containers
- fix an error code in verify_table_headers()
- fix memory leak on buffer on error exit path
- fix error returns checks by making size a ssize_t"
* tag 'apparmor-pr-2018-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (36 commits)
apparmor: fix memory leak on buffer on error exit path
apparmor: fix dangling symlinks to policy rawdata after replacement
apparmor: Fix an error code in verify_table_headers()
apparmor: fix error returns checks by making size a ssize_t
apparmor: update MAINTAINERS file git and wiki locations
apparmor: remove POLICY_MEDIATES_SAFE
apparmor: add base infastructure for socket mediation
apparmor: improve overlapping domain attachment resolution
apparmor: convert attaching profiles via xattrs to use dfa matching
apparmor: Add support for attaching profiles via xattr, presence and value
apparmor: cleanup: simplify code to get ns symlink name
apparmor: cleanup create_aafs() error path
apparmor: dfa split verification of table headers
apparmor: dfa add support for state differential encoding
apparmor: dfa move character match into a macro
apparmor: update domain transitions that are subsets of confinement at nnp
apparmor: move context.h to cred.h
apparmor: move task related defines and fns to task.X files
apparmor: cleanup, drop unused fn __aa_task_is_confined()
apparmor: cleanup fixup description of aa_replace_profiles
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SgEX
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180413' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Followup fixes for this merge window. This contains:
- Series from Ming, fixing corner cases in our CPU <-> queue mapping.
This triggered repeated warnings on especially s390, but I also hit
it in cpu hot plug/unplug testing while doing IO on NVMe on x86-64.
- Another fix from Ming, ensuring that we always order budget and
driver tag identically, avoiding a deadlock on QD=1 devices.
- Loop locking regression fix from this merge window, from Omar.
- Another loop locking fix, this time missing an unlock, from Tetsuo
Handa.
- Fix for racing IO submission with device removal from Bart.
- sr reference fix from me, fixing a case where disk change or
getevents can race with device removal.
- Set of nvme fixes by way of Keith, from various contributors"
* tag 'for-linus-20180413' of git://git.kernel.dk/linux-block: (28 commits)
nvme: expand nvmf_check_if_ready checks
nvme: Use admin command effects for admin commands
nvmet: fix space padding in serial number
nvme: check return value of init_srcu_struct function
nvmet: Fix nvmet_execute_write_zeroes sector count
nvme-pci: Separate IO and admin queue IRQ vectors
nvme-pci: Remove unused queue parameter
nvme-pci: Skip queue deletion if there are no queues
nvme: target: fix buffer overflow
nvme: don't send keep-alives to the discovery controller
nvme: unexport nvme_start_keep_alive
nvme-loop: fix kernel oops in case of unhandled command
nvme: enforce 64bit offset for nvme_get_log_ext fn
sr: get/drop reference to device in revalidate and check_events
blk-mq: Revert "blk-mq: reimplement blk_mq_hw_queue_mapped"
blk-mq: Avoid that submitting a bio concurrently with device removal triggers a crash
backing: silence compiler warning using __printf
blk-mq: remove code for dealing with remapping queue
blk-mq: reimplement blk_mq_hw_queue_mapped
blk-mq: don't check queue mapped in __blk_mq_delay_run_hw_queue()
...
Pull more i2c updates from Wolfram Sang:
- hot bugfix for i801 to make laptops with strange BIOS reboot again
when using SMBUS Host notify
- change to MAINTAINERS creating a specific fallback entry for I2C host
drivers and settings its status to "Odd fixes"
- a long overdue param checking for the I2C core
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: add param sanity check to i2c_transfer()
MAINTAINERS: add maintainer for Renesas I2C related drivers
MAINTAINERS: remove me as maintainer for I2C host drivers
i2c: i801: Restore configuration at shutdown
i2c: i801: Save register SMBSLVCMD value only once
and for PCI issues on SH7786.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJa0M3WAAoJELcQ+SIFb8HasUEH/2Jb1rTgmeU/95Xg9GPpQDBc
IWjNLmtZ3ZoXdpFZUN5Ezr1lcKu+3s4wUOEJkpznsL1VTnO0hYyY+UTfxg2ASRPC
r/bUAPhkVVl77k7v9jrxLyBa93PxIjZua/r2PooY7nuA9EQugTRxVgCWNAkJnTrJ
YVCy5lEXl4lyxGQNIhIOEcV1NGkwPwotEwkydjNFHtq1rUiUjwP3TfhdmshRI+7r
HQCzhs9NaYxRb6PV4xaqiTBT5AfXQnkofpFUp7OgpOZTby8/OAwvL7+xNEfI3bt8
cYUaEw9BRnAtutE2drSZu+4sSdGlZxCgX6TyWoHDnFREQqeg/DVSWNeJuDC9kmY=
=feGF
-----END PGP SIGNATURE-----
Merge tag 'sh-for-4.17' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Fixes for bugs in futex, device tree, and userspace breakpoint traps,
and for PCI issues on SH7786"
* tag 'sh-for-4.17' of git://git.libc.org/linux-sh:
arch/sh: pcie-sh7786: handle non-zero DMA offset
arch/sh: pcie-sh7786: adjust the memory mapping
arch/sh: pcie-sh7786: adjust PCI MEM and IO regions
arch/sh: pcie-sh7786: exclude unusable PCI MEM areas
arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled
arch/sh: pci: don't use disabled resources
arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset
arch/sh: add sh7786_mm_sel() function
sh: fix debug trap failure to process signals before return to user
sh: fix memory corruption of unflattened device tree
sh: fix futex FUTEX_OP_SET op on userspace addresses
A few late updates to address some issues arising from conflicts with
other trees:
- Removal of Qualcomm-specific Spectre-v2 mitigation in favour of the
generic SMCCC-based firmware call
- Fix EL2 hardening capability checking, which was bodged to reduce
conflicts with the KVM tree
- Add some currently unused assembler macros for managing SIMD registers
which will be used by some crypto code in the next merge window
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJa0H0mAAoJELescNyEwWM0YYcH/3OMP4qJYT7bKtJvuxSkR8j6
z8QP9ujdZ3hJL5y2dddvJ1xxSOUxZ9MHMvM5PUQRI/TYj2OkXnnXoDFTtjzXrRiL
+uDrdyMvkQSz0klAi9qsoVaPzR9LqEiqcglMbuZKUGEd5gzcdzLCrBcY2jRYpGQ8
w5Kxdw5Am4n97yqHDoGO1tLRmz9D0K3ucMmFE319ocql+j6W0XbqEnhgVfgHvBW/
DmaAe3VoUbABh+K4JGM7PGk+BUiMEttZpAnjNuasL0+UAnZVgSYSR2lgrex9WaxF
1K8Aat4ftknozUrZ+H4ZTnBdwTTFkfTzsh9XOTKY7dX4dKd4m6P44r50AwGWsQM=
=10by
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Will Deacon:
"A few late updates to address some issues arising from conflicts with
other trees:
- Removal of Qualcomm-specific Spectre-v2 mitigation in favour of the
generic SMCCC-based firmware call
- Fix EL2 hardening capability checking, which was bodged to reduce
conflicts with the KVM tree
- Add some currently unused assembler macros for managing SIMD
registers which will be used by some crypto code in the next merge
window"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: assembler: add macros to conditionally yield the NEON under PREEMPT
arm64: assembler: add utility macros to push/pop stack frames
arm64: Move the content of bpi.S to hyp-entry.S
arm64: Get rid of __smccc_workaround_1_hvc_*
arm64: capabilities: Rework EL2 vector hardening entry
arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening
Pull more s390 updates from Martin Schwidefsky:
"Three notable larger changes next to the usual bug fixing:
- update the email addresses in MAINTAINERS for the s390 folks to use
the simpler linux.ibm.com domain instead of the old
linux.vnet.ibm.com
- an update for the zcrypt device driver that removes some old and
obsolete interfaces and add support for up to 256 crypto adapters
- a rework of the IPL aka boot code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits)
s390: correct nospec auto detection init order
s390/zcrypt: Support up to 256 crypto adapters.
s390/zcrypt: Remove deprecated zcrypt proc interface.
s390/zcrypt: Remove deprecated ioctls.
s390/zcrypt: Make ap init functions static.
MAINTAINERS: update s390 maintainers email addresses
s390/ipl: remove reipl_method and dump_method
s390/ipl: correct kdump reipl block checksum calculation
s390/ipl: remove non-existing functions declaration
s390: assume diag308 set always works
s390/ipl: avoid adding scpdata to cmdline during ftp/dvd boot
s390/ipl: correct ipl parmblock valid checks
s390/ipl: rely on diag308 store to get ipl info
s390/ipl: move ipl_flags to ipl.c
s390/ipl: get rid of ipl_ssid and ipl_devno
s390/ipl: unite diag308 and scsi boot ipl blocks
s390/ipl: ensure loadparm valid flag is set
s390/qdio: lock device while installing IRQ handler
s390/qdio: clear intparm during shutdown
s390/ccwgroup: require at least one ccw device
...
-----BEGIN PGP SIGNATURE-----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=WE2n
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One omap, and one alsa pm fix (we merged the breaking patch via drm
tree).
Otherwise it's two bunches of amdgpu fixes, removing an unneeded file,
some DC fixes, HDMI audio regression fix, and some vega12 fixes"
* tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux: (27 commits)
Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)"
Revert "drm/amd/display: fix dereferencing possible ERR_PTR()"
drm/amd/display: Fix regamma not affecting full-intensity color values
drm/amd/display: Fix FBC text console corruption
drm/amd/display: Only register backlight device if embedded panel connected
drm/amd/display: fix brightness level after resume from suspend
drm/amd/display: HDMI has no sound after Panel power off/on
drm/amdgpu: add MP1 and THM hw ip base reg offset
drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset
drm/radeon: add PX quirk for Asus K73TK
drm/omap: fix crash if there's no video PLL
drm/amdgpu: Fix memory leaks at amdgpu_init() error path
drm/amdgpu: Fix PCIe lane width calculation
drm/radeon: Fix PCIe lane width calculation
drm/amdgpu/si: implement get/set pcie_lanes asic callback
drm/amdgpu: Add support for SRBM selection v3
Revert "drm/amdgpu: Don't change preferred domian when fallback GTT v5"
drm/amd/powerply: fix power reading on Fiji
drm/amd/powerplay: Enable ACG SS feature
drm/amdgpu/sdma: fix mask in emit_pipeline_sync
...
- Replace open coded "ARRAY_SIZE()" with macro
- Updates to uprobes
- Bug fix for perf event filter on error path
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWs+2YxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsRUAP9okqGRR/01bBLqNKiJ2j5YeBc9YlWl
R2rC0xbwVBLgJQEAwpE5jxahqKutbgrBDalDeCmXmeTOhSbGRJaBxXqwzwE=
=ZAuQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few clean ups and bug fixes:
- replace open coded "ARRAY_SIZE()" with macro
- updates to uprobes
- bug fix for perf event filter on error path"
* tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Enforce passing in filter=NULL to create_filter()
trace_uprobe: Simplify probes_seq_show()
trace_uprobe: Use %lx to display offset
tracing/uprobe: Add support for overlayfs
tracing: Use ARRAY_SIZE() macro instead of open coding it
Add copyright in two files before they get autorubberstamped.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlrPrK4UHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vyxAA//dvZKCB6q3F35BKfCBYnKz+OQQbc0
QcS439tYRLxNzvD1pffLJtlRGQKAPUyBvkIgdq+J2jgqbFgY18UY5vgztQgELzrI
75qMuwq57m4K5tdO2+sjO9i7d0F2TXG4Nr82ZcWYZseQoAjIOYjh9NGErVeirXME
g/viDWlPvfQIi0MgMO6BEyCXMg3iNwr+10XoutI3j+Z8Mdd/uD33vy8lzPu+OIsc
dS4N0trnpjpc4hZngtGfctuHmvjnZojkSdlGyN///xpTbOHhtgjWud9nCB4Ti246
3RqClg3id3ll+58dHt5cnsyLjd2YTsT1wtuq5gXDWkA1iFbRWsGMXS483sMnBNAG
wlbkDgEPNb0u6HRgjSaBv0zpXIvP6d6g8SIOtbeJdlHPPEJ184GHKeCGmg3/Shwl
sYsvmrCcYI1sMEIEYDf6W08bI9RhfS2khBZHBYz9yZwe7oEGYHIx7MaSht5naYcx
c4xv9DPC2a/hgGa09D05kY16B9Q/R2PU21HLUEQuP5dkpaB4BJgFZnRFHq3y0hgg
zJDh1FKJ6sKnHkNcbRJPRXJiUN+PODsJPVCrZtufc5uFHymtGFzybynddPazwU+K
aete0l/O/bS3ta5qnBw8VqoxqQ+syqb4i+kD3PNHoufuTLUnfCSEoehduktO2AoZ
HqCYa3VuuKq40cY=
=tmVM
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- mark Extended Tags as broken on Broadcom HT1100 and HT2000 Root Ports
to fix drm/Xorg hangs and unresponsive keyboards (Sinan Kaya)
- remove useless messages during resource reassignment (Desnes A. Nunes
do Rosario)
* tag 'pci-v4.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Remove messages about reassigning resources
PCI: Mark Broadcom HT1100 and HT2000 Root Port Extended Tags as broken
Pull parisc updates from Helge Deller:
- fix panic when halting system via "shutdown -h now"
- drop own coding in favour of generic CONFIG_COMPAT_BINFMT_ELF
implementation
- add FPE_CONDTRAP constant: last outstanding parisc-specific cleanup
for Eric Biedermans siginfo patches
- move some functions to .init and some to .text.hot linker sections
* 'parisc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent panic at system halt
parisc: Switch to generic COMPAT_BINFMT_ELF
parisc: Move cache flush functions into .text.hot section
parisc/signal: Add FPE_CONDTRAP for conditional trap handling
On SuperH, the base of the physical memory might be different from
zero. In this case, PCI address zero will map to a non-zero physical
address. In order to make sure that the DMA mapping API takes care of
this DMA offset, we must fill in the dev->dma_pfn_offset field for PCI
devices. This gets done in the pcibios_bus_add_device() hook, called
for each new PCI device detected.
The dma_pfn_offset global variable is re-calculated for every PCI
controller available on the platform, but that's not an issue because
its value will each time be exactly the same, as it only depends on
the memory start address and memory size.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
The code setting up the PCI -> SuperHighway mapping doesn't take into
account the fact that the address stored in PCIELARx must be aligned
with the size stored in PCIELAMRx.
For example, when your physical memory starts at 0x0800_0000 (128 MB),
a size of 64 MB or 128 MB is fine. However, if you have 256 MB of
memory, it doesn't work because the base address is not aligned on the
size.
In such situation, we have to round down the base address to make sure
it is aligned on the size of the area. For for a 0x0800_0000 base
address with 256 MB of memory, we will round down to 0x0, and extend
the size of the mapping to 512 MB.
This allows the mapping to work on platforms that have 256 MB of
RAM. The current setup would only work with 128 MB of RAM or less.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
The current definition of the PCIe IO and MEM resources for SH7786
doesn't match what the datasheet says. For example, for PCIe0
0xfe100000 is advertised by the datasheet as a PCI IO region, while
0xfd000000 is advertised as a PCI MEM region. The code currently
inverts the two.
The SH4A_PCIEPARL and SH4A_PCIEPTCTLR registers allow to define the
base address and role of the different regions (including whether it's
a MEM or IO region). However, practical experience on a SH7786 shows
that if 0xfe100000 is used for LEL and 0xfd000000 for IO, a PCIe
device using two MEM BARs cannot be accessed at all. Simply using
0xfe100000 for IO and 0xfd000000 for MEM makes the PCIe device
accessible.
It is very likely that this was never seen because there are two other
PCI MEM region listed in the resources. However, for different
reasons, none of the two other MEM regions are usable on the specific
SH7786 platform the problem was encountered. Therefore, the last MEM
region at 0xfe100000 was used to place the BARs, making the device
non-functional.
This commit therefore adjusts those PCI MEM and IO resources
definitions so that they match what the datasheet says. They have only
been tested with PCIe 0.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Depending on the physical memory layout, some PCI MEM areas are not
usable. According to the SH7786 datasheet, the PCI MEM area from
1000_0000 to 13FF_FFFF is only usable if the physical memory layout
(in MMSELR) is 1, 2, 5 or 6. In all other configurations, this PCI MEM
area is not usable (because it overlaps with DRAM).
Therefore, this commit adjusts the PCI SH7786 initialization to mark
the relevant PCI resource as IORESOURCE_DISABLED if we can't use it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Some PCI MEM resources are marked as IORESOURCE_MEM_32BIT, which means
they are only usable when the SH core runs in 32-bit mode. In 29-bit
mode, such memory regions are not usable.
The existing code for SH7786 properly skips such regions when
configuring the PCIe controller registers. However, because such
regions are still described in the resource array, the
pcibios_scanbus() function in the SuperH pci.c will register them to
the PCI core. Due to this, the PCI core will allocate MEM areas from
this resource, and assign BARs pointing to this area, even though it's
unusable.
In order to prevent this from happening, we mark such regions as
IORESOURCE_DISABLED, which tells the SuperH pci.c pcibios_scanbus()
function to skip them.
Note that we separate marking the region as disabled from skipping it,
because other regions will be marked as disabled in follow-up patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
In pcibios_scanbus(), we provide to the PCI core the usable MEM and IO
regions using pci_add_resource_offset(). We travel through all
resources available in the "struct pci_channel".
Also, in register_pci_controller(), we travel through all resources to
request them, making sure they don't conflict with already requested
resources.
However, some resources may be disabled, in which case they should not
be requested nor provided to the PCI core.
In the current situation, none of the resources are disabled. However,
follow-up patches in this series will make some resources disabled,
making this preliminary change necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Some devices may have a non-zero DMA offset, i.e an offset between the
DMA address and the physical address. Such an offset can be encoded
into the dma_pfn_offset field of "struct device", but the SuperH
implementation of the DMA mapping API does not observe this
information.
This commit fixes that by ensuring the DMA address is properly
calculated depending on this DMA offset.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
The SH7786 has different physical memory layout configurations,
configurable through the MMSELR register. The configuration is
typically defined by the bootloader, so Linux generally doesn't care.
Except that depending on the configuration, some PCI MEM areas may or
may not be available. This commit adds a helper function that allows
to retrieve the current physical memory layout configuration. It will
be used in a following patch to exclude unusable PCI MEM areas during
the PCI initialization.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
When responding to a debug trap (breakpoint) in userspace, the
kernel's trap handler raised SIGTRAP but returned from the trap via a
code path that ignored pending signals, resulting in an infinite loop
re-executing the trapping instruction.
Signed-off-by: Rich Felker <dalias@libc.org>
unflatten_device_tree() makes use of memblock allocation, and
therefore must be called before paging_init() migrates the memblock
allocation data to the bootmem framework. Otherwise the record of the
allocation for the expanded device tree will be lost, and will
eventually be clobbered when allocated for another use.
Signed-off-by: Rich Felker <dalias@libc.org>
Commit 00b73d8d1b ("sh: add working futex atomic ops on userspace
addresses for smp") changed the futex_atomic_op_inuser function to
use a loop. In case of the FUTEX_OP_SET op with a userspace address
containing a value different of 0, this loop is an endless loop.
Fix that by loading the value of oldval from the userspace before doing
the cmpxchg op, also for the FUTEX_OP_SET case.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Rich Felker <dalias@libc.org>
- Add a PX quirk for radeon
- Fix flickering and stability issues with DC on some platforms
- Fix HDMI audio regression
- Few other misc DC and base driver fixes
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux:
Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)"
Revert "drm/amd/display: fix dereferencing possible ERR_PTR()"
drm/amd/display: Fix regamma not affecting full-intensity color values
drm/amd/display: Fix FBC text console corruption
drm/amd/display: Only register backlight device if embedded panel connected
drm/amd/display: fix brightness level after resume from suspend
drm/amd/display: HDMI has no sound after Panel power off/on
drm/amdgpu: add MP1 and THM hw ip base reg offset
drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset
drm/radeon: add PX quirk for Asus K73TK
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlrOFYwACgkQlvcN/ahK
Bwo3twf/ata4Er+pwcYWGM2U7QMPIeBjqyPuuVx/I2bxTvRfdZ0eCiqdXXiY1flf
cKG6PIFxkLl6ypuFGlBXKbt+XX3ReRpNpKro3GUIh1tNarklKwTzGOoyeDBNixUZ
JIdI/StDHSFzfq119jl58S0cWAhuT5CjEPjeiYQX03dwxv57+/XJQlfncsy2qSUH
SVDkgueeYmbSsRm3C3Qcz6pCVJs3LozufzAz75cU2C/+hN5jDRPx3UBKgxXA3sSV
yfPw0gsBEzc0F9xl3LexL8phuwr4GZVsCsWD8AR7VRuq6OFMOkdvU/c1Axkex6xi
9yZiLmN6Wn5epffAKgdLUF7KzPRL2A==
=QiL0
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
omap: Fix crash on AM4 EVM, and all OMAP2/3 boards (Tomi)
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
* tag 'drm-misc-next-fixes-2018-04-11' of git://anongit.freedesktop.org/drm/drm-misc:
drm/omap: fix crash if there's no video PLL
- Cleanup unnecessary function call parameters
- Fix a use-after-free bug when aborting logging intents
- Refactor filestreams state data to avoid use-after-free bug
- Fix incorrect removal of cow extents when truncating extended
attributes.
- Refactor open-coded __set_page_dirty in favor of using vfs function.
- Fix a deadlock when fstrim and fs shutdown race.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uGz0
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"Most of these are code cleanups, but there are a couple of notable
use-after-free bug fixes.
This series has been run through a full xfstests run over the week and
through a quick xfstests run against this morning's master, with no
major failures reported.
- clean up unnecessary function call parameters
- fix a use-after-free bug when aborting logging intents
- refactor filestreams state data to avoid use-after-free bug
- fix incorrect removal of cow extents when truncating extended
attributes.
- refactor open-coded __set_page_dirty in favor of using vfs
function.
- fix a deadlock when fstrim and fs shutdown race"
* tag 'xfs-4.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
Force log to disk before reading the AGF during a fstrim
Export __set_page_dirty
xfs: only cancel cow blocks when truncating the data fork
xfs: non-scrub - remove unused function parameters
xfs: remove filestream item xfs_inode reference
xfs: fix intent use-after-free on abort
xfs: Remove "committed" argument of xfs_dir_ialloc
merge window while it's still open.
1. The first patch adds a new function to lockref: lockref_put_not_zero
2. The second patch fixes GFS2's glock dump code so it uses the new lockref
function. This fixes a problem whereby lock dumps could miss glocks.
3. I made a minor patch to update some comments and fix the lock ordering
text in our gfs2-glocks.txt Documentation file.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaz6pdAAoJENeLYdPf93o71wMH/0cEo34xWiScRM07EgLmZZ3q
YXMvpTvrwK+9i2u8anxiX1smezHeS+7jPrYOG8AGu3IZvKYGTDOwoIY9pxESy5gs
1Rf60s6pPE/dkTSqPaNNuBxPrM1yVyRWOPx04LxC5BCXhsS/6U2RS9ElxGDe7Nyq
P66z1wfm63+erDR7mKSuOL3Ejtglj2EPcrAupaBlRS0wjdUQ9ORyrZBpT6JMOWqd
HWjchrzWVAqx+iyLHlKZjTyPHsPaUBaj1fuv/Vcgu5sJmEJ9mF4s/GQTdwIzi8ip
ByD7MfilyrT7dxRm1uw8OJ7TvqNeaCtxsyNGGBOlSx81s/pk5Vhs8bevnczNvi8=
=jWsi
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull more gfs2 updates from Bob Peterson:
"We decided to request the latest three patches to be merged into this
merge window while it's still open.
- The first patch adds a new function to lockref:
lockref_put_not_zero
- The second patch fixes GFS2's glock dump code so it uses the new
lockref function. This fixes a problem whereby lock dumps could
miss glocks.
- I made a minor patch to update some comments and fix the lock
ordering text in our gfs2-glocks.txt Documentation file"
* tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Minor improvements to comments and documentation
gfs2: Stop using rhashtable_walk_peek
lockref: Add lockref_put_not_zero
Stable bugfixes:
- xprtrdma: Fix corner cases when handling device removal # v4.12+
- xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+
Features:
- New sunrpc tracepoint for RPC pings
- Finer grained NFSv4 attribute checking
- Don't unnecessarily return NFS v4 delegations
Other bugfixes and cleanups:
- Several other small NFSoRDMA cleanups
- Improvements to the sunrpc RTT measurements
- A few sunrpc tracepoint cleanups
- Various fixes for NFS v4 lock notifications
- Various sunrpc and NFS v4 XDR encoding cleanups
- Switch to the ida_simple API
- Fix NFSv4.1 exclusive create
- Forget acl cache after setattr operation
- Don't advance the nfs_entry readdir cookie if xdr decoding fails
-----BEGIN PGP SIGNATURE-----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=IlWo
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- xprtrdma: Fix corner cases when handling device removal # v4.12+
- xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+
Features:
- New sunrpc tracepoint for RPC pings
- Finer grained NFSv4 attribute checking
- Don't unnecessarily return NFS v4 delegations
Other bugfixes and cleanups:
- Several other small NFSoRDMA cleanups
- Improvements to the sunrpc RTT measurements
- A few sunrpc tracepoint cleanups
- Various fixes for NFS v4 lock notifications
- Various sunrpc and NFS v4 XDR encoding cleanups
- Switch to the ida_simple API
- Fix NFSv4.1 exclusive create
- Forget acl cache after setattr operation
- Don't advance the nfs_entry readdir cookie if xdr decoding fails"
* tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (47 commits)
NFS: advance nfs_entry cookie only after decoding completes successfully
NFSv3/acl: forget acl cache after setattr
NFSv4.1: Fix exclusive create
NFSv4: Declare the size up to date after it was set.
nfs: Use ida_simple API
NFSv4: Fix the nfs_inode_set_delegation() arguments
NFSv4: Clean up CB_GETATTR encoding
NFSv4: Don't ask for attributes when ACCESS is protected by a delegation
NFSv4: Add a helper to encode/decode struct timespec
NFSv4: Clean up encode_attrs
NFSv4; Clean up XDR encoding of type bitmap4
NFSv4: Allow GFP_NOIO sleeps in decode_attr_owner/decode_attr_group
SUNRPC: Add a helper for encoding opaque data inline
SUNRPC: Add helpers for decoding opaque and string types
NFSv4: Ignore change attribute invalidations if we hold a delegation
NFS: More fine grained attribute tracking
NFS: Don't force unnecessary cache invalidation in nfs_update_inode()
NFS: Don't redirty the attribute cache in nfs_wcc_update_inode()
NFS: Don't force a revalidation of all attributes if change is missing
NFS: Convert NFS_INO_INVALID flags to unsigned long
...
Pull vfs thaw updates from Al Viro:
"An ancient series that has fallen through the cracks in the previous
cycle"
* 'work.thaw' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
buffer.c: call thaw_super during emergency thaw
vfs: factor sb iteration out of do_emergency_remount
This seems to cause flickering and lock-ups for a wide range of users.
Revert until we've found a proper fix for the flickering and lock-ups.
This reverts commit 36cc549d59.
Cc: Shirish S <shirish.s@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull AFS updates from Al Viro:
"The AFS series posted by dhowells depended upon lookup_one_len()
rework; now that prereq is in the mainline, that series had been
rebased on top of it and got some exposure and testing..."
* 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: Do better accretion of small writes on newly created content
afs: Add stats for data transfer operations
afs: Trace protocol errors
afs: Locally edit directory data for mkdir/create/unlink/...
afs: Adjust the directory XDR structures
afs: Split the directory content defs into a header
afs: Fix directory handling
afs: Split the dynroot stuff out and give it its own ops tables
afs: Keep track of invalid-before version for dentry coherency
afs: Rearrange status mapping
afs: Make it possible to get the data version in readpage
afs: Init inode before accessing cache
afs: Introduce a statistics proc file
afs: Dump bad status record
afs: Implement @cell substitution handling
afs: Implement @sys substitution handling
afs: Prospectively look up extra files when doing a single lookup
afs: Don't over-increment the cell usage count when pinning it
afs: Fix checker warnings
vfs: Remove the const from dir_context::actor
This reverts commit cd2d6c92a8.
Cc: Shirish S <shirish.s@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hardware understands the regamma LUT as a piecewise linear function,
with points spaced exponentially along the range. We previously
programmed the LUT for range [2^-10, 2^0). This causes (normalized)
color values of 1 (=2^0) to miss the programmed LUT, and fall onto the
end region.
For DCE, the end region is extrapolated using a single (base, slope)
pair, using the max y-value from the last point in the curve as base.
This presents a problem, since this value affects all three color
channels. Scaling down the intensity of say - the blue regamma curve -
will not affect it's end region. This is especially noticiable when
using RedShift. It scales down the blue and green channels, but leaves
full-intensity colors unshifted.
Therefore, extend the range to cover [2^-10, 2^1) by programming another
hardware segment, containing only one point. That way, we won't be
hitting the end region.
Note that things are a bit different for DCN, since the end region can
be set per-channel.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull networking fixes from David Miller:
1) In ip_gre tunnel, handle the conflict between TUNNEL_{SEQ,CSUM} and
GSO/LLTX properly. From Sabrina Dubroca.
2) Stop properly on error in lan78xx_read_otp(), from Phil Elwell.
3) Don't uncompress in slip before rstate is initialized, from Tejaswi
Tanikella.
4) When using 1.x firmware on aquantia, issue a deinit before we
hardware reset the chip, otherwise we break dirty wake WOL. From
Igor Russkikh.
5) Correct log check in vhost_vq_access_ok(), from Stefan Hajnoczi.
6) Fix ethtool -x crashes in bnxt_en, from Michael Chan.
7) Fix races in l2tp tunnel creation and duplicate tunnel detection,
from Guillaume Nault.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
l2tp: fix race in duplicate tunnel detection
l2tp: fix races in tunnel creation
tun: send netlink notification when the device is modified
tun: set the flags before registering the netdevice
lan78xx: Don't reset the interface on open
bnxt_en: Fix NULL pointer dereference at bnxt_free_irq().
bnxt_en: Need to include RDMA rings in bnxt_check_rings().
bnxt_en: Support max-mtu with VF-reps
bnxt_en: Ignore src port field in decap filter nodes
bnxt_en: do not allow wildcard matches for L2 flows
bnxt_en: Fix ethtool -x crash when device is down.
vhost: return bool from *_access_ok() functions
vhost: fix vhost_vq_access_ok() log check
vhost: Fix vhost_copy_to_user()
net: aquantia: oops when shutdown on already stopped device
net: aquantia: Regression on reset with 1.x firmware
cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
slip: Check if rstate is initialized before uncompressing
lan78xx: Avoid spurious kevent 4 "error"
lan78xx: Correctly indicate invalid OTP
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhRJncuj2BJSl0Jf3sN6d1ii/Ey8FAlrPnM8ACgkQsN6d1ii/
Ey9Kzwf/eQVb6zzn7FDHAb6pLaZ5i2xi2xohsKmhAVQIEa94rZ3mLoRegtnIfyjO
RcjjSAzHSZO9NQgNA2ALdu6bBdzu4/ywQEQCnY2Gqxp0ocG/+k3p/FqLHZGdcqPo
e3gpcVxHSFWUCCGm1t3umI25driqrUq4xa6UFi2IB4djDvTrK/JsSygKx6GiVujL
2eV7v7rgqaaVZQyo8iOd+LlWuKZewKLfnALUDC21X5J2HmvfoyTdn85kldzbiIsG
YR7mcfgAtAVTyCfgXI3eqAGpRFEyqR4ga87oahdV3/iW+4wreh4hm2Xd/IETXklv
Epxyet8IlMB9886PuZhZqgnW6o1RDA==
=z3bP
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A few fixes of Xen related core code and drivers"
* tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen
xen/acpi: off by one in read_acpi_id()
xen/acpi: upload _PSD info for non Dom0 CPUs too
x86/xen: Delay get_cpu_cap until stack canary is established
xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END
xen: xenbus: Catch closing of non existent transactions
xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling
-----BEGIN PGP SIGNATURE-----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=l30v
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Fix for one swiotlb regression in 2.16 from Takashi"
* tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix unexpected swiotlb_alloc_coherent failures
* minor regression test cleanup
* formatting fixes for end user use of kdb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zz/y
-----END PGP SIGNATURE-----
Merge tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull kdb updates from Jason Wessel:
- fix 2032 time access issues and new compiler warnings
- minor regression test cleanup
- formatting fixes for end user use of kdb
* tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kdb: use memmove instead of overlapping memcpy
kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts()
kdb: bl: don't use tab character in output
kdb: drop newline in unknown command output
kdb: make "mdr" command repeat
kdb: use __ktime_get_real_seconds instead of __current_kernel_time
misc: kgdbts: Display progress of asynchronous tests
- Use generic pci_mmap_resoruce_range()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlrMWo4ACgkQykllyylKDCGrrQCfZHss5ank6e1H+EApm0KqEQFu
kbwAoIj6TdCVMH44kJwqtraIhBXV9dhX
=vYT3
-----END PGP SIGNATURE-----
Merge tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
"Use generic pci_mmap_resource_range()"
* tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Use generic pci_mmap_resource_range()
microblaze: Provide pgprot_device/writecombine macros for nommu
This patch simply fixes some comments and the gfs2-glocks.txt file:
Places where i_rwsem was called i_mutex, and adding i_rw_mutex.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function rhashtable_walk_peek is problematic because there is no
guarantee that the glock previously returned still exists; when that key
is deleted, rhashtable_walk_peek can end up returning a different key,
which will cause an inconsistent glock dump. Fix this by keeping track
of the current glock in the seq file iterator functions instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Put a lockref unless the lockref is dead or its count would become zero.
This is the same as lockref_put_or_lock except that the lock is never
left held.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
I have one regression fix for a minor build problem after the architecture
removal series, plus a rework of the barriers in the readl/writel
functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing lists
[1]. To summarize, we decided that architectures are responsible to
serialize readl() and writel() accesses on a device MMIO space relative
to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new default
for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers.
[1]: https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oBQh
-----END PGP SIGNATURE-----
Merge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"I have one regression fix for a minor build problem after the
architecture removal series, plus a rework of the barriers in the
readl/writel functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing
lists[1]. To summarize, we decided that architectures are responsible
to serialize readl() and writel() accesses on a device MMIO space
relative to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new
default for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers"
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
io: change writeX_relaxed() to remove barriers
io: change readX_relaxed() to remove barriers
dts: remove cris & metag dts hard link file
io: change inX() to have their own IO barrier overrides
io: change outX() to have their own IO barrier overrides
io: define stronger ordering for the default writeX() implementation
io: define stronger ordering for the default readX() implementation
io: define several IO & PIO barrier types for the asm-generic version
The nvmf_check_if_ready() checks that were added are very simplistic.
As such, the routine allows a lot of cases to fail ios during windows
of reset or re-connection. In cases where there are not multi-path
options present, the error goes back to the callee - the filesystem
or application. Not good.
The common routine was rewritten and calling syntax slightly expanded
so that per-transport is_ready routines don't need to be present.
The transports now call the routine directly. The routine is now a
fabrics routine rather than an inline function.
The routine now looks at controller state to decide the action to
take. Some states mandate io failure. Others define the condition where
a command can be accepted. When the decision is unclear, a generic
queue-or-reject check is made to look for failfast or multipath ios and
only fails the io if it is so marked. Otherwise, the io will be queued
and wait for the controller state to resolve.
Admin commands issued via ioctl share a live admin queue with commands
from the transport for controller init. The ioctls could be intermixed
with the initialization commands. It's possible for the ioctl cmd to
be issued prior to the controller being enabled. To block this, the
ioctl admin commands need to be distinguished from admin commands used
for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to
reflect this division and set it on ioctls requests. As the
nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(),
ensure that commands allocated by the ioctl path (actually anything
in core.c) preps the nvme_req(req) before starting the io. This will
preserve the USERCMD flag during execution and/or retry.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.e>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 42de82a8b5 previously attempted to fix this, and it did
correctly pad the MN and FR fields with spaces, but the SN field still
contains 0 bytes. The current code fills out the first 16 bytes with
hex2bin, leaving the last 4 bytes zeroed. Rather than adding a lot of
error-prone math to avoid overwriting SN twice, just set the whole thing
to spaces up front (it's only 20 bytes).
Fixes: 42de82a8b5 ("nvmet: don't report 0-bytes in serial number")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
