Commit Graph

2400 Commits

Author SHA1 Message Date
Liam R. Howlett
54a611b605 Maple Tree: add new data structure
Patch series "Introducing the Maple Tree"

The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently.  There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface.  If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.

The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes.  With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses.  The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.

The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct.  The
long term goal is to reduce or remove the mmap_lock contention.

The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers.  A single write operation will be
allowed at a time.  A reader re-walks if stale data is encountered.  VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.

Davidlor said

: Yes I like the maple tree, and at this stage I don't think we can ask for
: more from this series wrt the MM - albeit there seems to still be some
: folks reporting breakage.  Fundamentally I see Liam's work to (re)move
: complexity out of the MM (not to say that the actual maple tree is not
: complex) by consolidating the three complimentary data structures very
: much worth it considering performance does not take a hit.  This was very
: much a turn off with the range locking approach, which worst case scenario
: incurred in prohibitive overhead.  Also as Liam and Matthew have
: mentioned, RCU opens up a lot of nice performance opportunities, and in
: addition academia[1] has shown outstanding scalability of address spaces
: with the foundation of replacing the locked rbtree with RCU aware trees.

A similar work has been discovered in the academic press

	https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf

Sheer coincidence.  We designed our tree with the intention of solving the
hardest problem first.  Upon settling on a b-tree variant and a rough
outline, we researched ranged based b-trees and RCU b-trees and did find
that article.  So it was nice to find reassurances that we were on the
right path, but our design choice of using ranges made that paper unusable
for us.

This patch (of 70):

The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently.  There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface.  If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.

The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes.  With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses.  The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.

The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct.  The
long term goal is to reduce or remove the mmap_lock contention.

The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers.  A single write operation will be
allowed at a time.  A reader re-walks if stale data is encountered.  VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.

There is additional BUG_ON() calls added within the tree, most of which
are in debug code.  These will be replaced with a WARN_ON() call in the
future.  There is also additional BUG_ON() calls within the code which
will also be reduced in number at a later date.  These exist to catch
things such as out-of-range accesses which would crash anyways.

Link: https://lkml.kernel.org/r/20220906194824.2110408-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20220906194824.2110408-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-26 19:46:13 -07:00
Li Zhe
c4f20f1479 page_ext: introduce boot parameter 'early_page_ext'
In commit 2f1ee0913c ("Revert "mm: use early_pfn_to_nid in
page_ext_init""), we call page_ext_init() after page_alloc_init_late() to
avoid some panic problem.  It seems that we cannot track early page
allocations in current kernel even if page structure has been initialized
early.

This patch introduces a new boot parameter 'early_page_ext' to resolve
this problem.  If we pass it to the kernel, page_ext_init() will be moved
up and the feature 'deferred initialization of struct pages' will be
disabled to initialize the page allocator early and prevent the panic
problem above.  It can help us to catch early page allocations.  This is
useful especially when we find that the free memory value is not the same
right after different kernel booting.

[akpm@linux-foundation.org: fix section issue by removing __meminitdata]
Link: https://lkml.kernel.org/r/20220825102714.669-1-lizhe.67@bytedance.com
Signed-off-by: Li Zhe <lizhe.67@bytedance.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11 20:26:02 -07:00
Linus Torvalds
e022620b5d arm64 fixes for -rc3
- Fix workaround for Cortex-A76 erratum #1286807
 
 - Add workaround for AMU erratum #2457168 on Cortex-A510
 
 - Drop reference to removed CONFIG_ARCH_RANDOM #define
 
 - Fix parsing of the "rodata=full" cmdline option
 
 - Fix a bunch of issues in the SME register state switching and sigframe code
 
 - Fix incorrect extraction of the CTR_EL0.CWG register field
 
 - Fix ACPI cache topology probing when the PPTT is not present
 
 - Trivial comment and whitespace fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmMIr4YQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNOpcB/9PQM3DtbFcCFJeetFxJYVSPHikHfEj4SHY
 H6NRNLA9JwwCqA1/RKbJQDpFS34JdL5UgtNuUFbg4zkH2aaeML7WKuRg396jv2ke
 GmHpOkNeIaae0NQes3MLZQf+Heh2oimRYwlPXJc23vhAIZagwby3yR/9POrxKm6p
 kamLIrmwU1mU7pwr7HEkRr1HOd/eOJ+q6P3UYrFlAgAp5PEfVGgcdjbHJ1gY1KWw
 HwR6s2yWQ71+Aug9wMS56TQszBedyuIOeKezAI+IbThF6t/kQlfJna+hqvPp0zEE
 mz1hss7ACpfDURdga35B1bE146aZ1SKEsXXaB853JI76K6D534Y9
 =3oRd
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "A bumper crop of arm64 fixes for -rc3.

  The largest change is fixing our parsing of the 'rodata=full' command
  line option, which kstrtobool() started treating as 'rodata=false'.
  The fix actually makes the parsing of that option much less fragile
  and updates the documentation at the same time.

  We still have a boot issue pending when KASLR is disabled at compile
  time, but there's a fresh fix on the list which I'll send next week if
  it holds up to testing.

  Summary:

   - Fix workaround for Cortex-A76 erratum #1286807

   - Add workaround for AMU erratum #2457168 on Cortex-A510

   - Drop reference to removed CONFIG_ARCH_RANDOM #define

   - Fix parsing of the "rodata=full" cmdline option

   - Fix a bunch of issues in the SME register state switching and sigframe code

   - Fix incorrect extraction of the CTR_EL0.CWG register field

   - Fix ACPI cache topology probing when the PPTT is not present

   - Trivial comment and whitespace fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/sme: Don't flush SVE register state when handling SME traps
  arm64/sme: Don't flush SVE register state when allocating SME storage
  arm64/signal: Flush FPSIMD register state when disabling streaming mode
  arm64/signal: Raise limit on stack frames
  arm64/cache: Fix cache_type_cwg() for register generation
  arm64/sysreg: Guard SYS_FIELD_ macros for asm
  arm64/sysreg: Directly include bitfield.h
  arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level
  arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly
  arm64: fix rodata=full
  arm64: Fix comment typo
  docs/arm64: elf_hwcaps: unify newlines in HWCAP lists
  arm64: adjust KASLR relocation after ARCH_RANDOM removal
  arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76
2022-08-26 11:32:53 -07:00
Mark Rutland
2e8cff0a0e arm64: fix rodata=full
On arm64, "rodata=full" has been suppored (but not documented) since
commit:

  c55191e96c ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well")

As it's necessary to determine the rodata configuration early during
boot, arm64 has an early_param() handler for this, whereas init/main.c
has a __setup() handler which is run later.

Unfortunately, this split meant that since commit:

  f9a40b0890 ("init/main.c: return 1 from handled __setup() functions")

... passing "rodata=full" would result in a spurious warning from the
__setup() handler (though RO permissions would be configured
appropriately).

Further, "rodata=full" has been broken since commit:

  0d6ea3ac94 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()")

... which caused strtobool() to parse "full" as false (in addition to
many other values not documented for the "rodata=" kernel parameter.

This patch fixes this breakage by:

* Moving the core parameter parser to an __early_param(), such that it
  is available early.

* Adding an (optional) arch hook which arm64 can use to parse "full".

* Updating the documentation to mention that "full" is valid for arm64.

* Having the core parameter parser handle "on" and "off" explicitly,
  such that any undocumented values (e.g. typos such as "ful") are
  reported as errors rather than being silently accepted.

Note that __setup() and early_param() have opposite conventions for
their return values, where __setup() uses 1 to indicate a parameter was
handled and early_param() uses 0 to indicate a parameter was handled.

Fixes: f9a40b0890 ("init/main.c: return 1 from handled __setup() functions")
Fixes: 0d6ea3ac94 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jagdish Gediya <jvgediya@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220817154022.3974645-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23 11:02:02 +01:00
Nick Desaulniers
a0a12c3ed0 asm goto: eradicate CC_HAS_ASM_GOTO
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.

Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.

The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.

Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.

Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-21 10:06:28 -07:00
Linus Torvalds
0af5cb349a Kbuild updates for v5.20
- Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3)
 
  - Fix error of rpm-pkg cross-builds
 
  - Support riscv for checkstack tool
 
  - Re-enable -Wformwat warnings for Clang
 
  - Clean up modpost, Makefiles, and misc scripts
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmLykZUVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsG4QoP/3Ooac5+kmcm9nT+fwtuQkFMPDhW
 /5ipDgE8W6kwbGSZX7/KD/3otiUhyhhlUjh1tUHpl+WEoy9Q1orUzbyOzTQW0QYH
 zdGazuDBsTPa35Vmow3vGUyX1FdRNKsHuDXC1M2BBLZK05OEjyNMxgi6NowE/XnK
 nFVAdZgu6HYfym/L5FDuXEmM1EYiAcPZL37+rBAd5mVCEyDk3rW2TxDa05Gs/8dr
 7QJ9rOKPS7+Hs/gc7w56z91eBzvWOhLjTcKFsqOuL3Yd1oFIwExAhaxo3TRUkp8i
 VBYKfty+9tXPxNNzKHBq4U9gONkuwQEQu3wOQbSKJQblkS5Sq2wfXH4kQoyCAZIB
 5+lsI4idHnD1ZBpOjYxxDrIY6qD+eb/xbxa+AxILoFOK8P1uEn7IHAtwLAg9BzT0
 NXdTd8W63D/5F6hVOJNqK8TPupINcWdXcvFvgz6q+Q6l8EDoVnsmSUP3F1qlJ0DI
 WhtKhX1CI1PC2T/8ruKJWfPTi6foHhzu4euYWuqUzMmlkhLbp9yHYDDxDN9Li2bh
 eT/Qy2oWHraLfXvmfhuE9SS0FrQgNtwtmPCVIn7JZTcji9JCt4ax7Erq3ufhG1BR
 oT1X4M1iangjILbZXJlrrS1qz3DeV84pjjR0TF/56ifqskRJPOPrfHnrQ0m3aMnh
 TDSweoE1ah1BcAlz
 =9kds
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3)

 - Fix error of rpm-pkg cross-builds

 - Support riscv for checkstack tool

 - Re-enable -Wformwat warnings for Clang

 - Clean up modpost, Makefiles, and misc scripts

* tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  modpost: remove .symbol_white_list field entirely
  modpost: remove unneeded .symbol_white_list initializers
  modpost: add PATTERNS() helper macro
  modpost: shorten warning messages in report_sec_mismatch()
  Revert "Kbuild, lto, workaround: Don't warn for initcall_reference in modpost"
  modpost: use more reliable way to get fromsec in section_rel(a)()
  modpost: add array range check to sec_name()
  modpost: refactor get_secindex()
  kbuild: set EXIT trap before creating temporary directory
  modpost: remove unused Elf_Sword macro
  Makefile.extrawarn: re-enable -Wformat for clang
  kbuild: add dtbs_prepare target
  kconfig: Qt5: tell the user which packages are required
  modpost: use sym_get_data() to get module device_table data
  modpost: drop executable ELF support
  checkstack: add riscv support for scripts/checkstack.pl
  kconfig: shorten the temporary directory name for cc-option
  scripts: headers_install.sh: Update config leak ignore entries
  kbuild: error out if $(INSTALL_MOD_PATH) contains % or :
  kbuild: error out if $(KBUILD_EXTMOD) contains % or :
  ...
2022-08-10 10:40:41 -07:00
Linus Torvalds
e74acdf55d Modules updates for 6.0
For the 6.0 merge window the modules code shifts to cleanup and minor fixes
 effort. This is becomes much easier to do and review now due to the code
 split to its own directory from effort on the last kernel release. I expect
 to see more of this with time and as we expand on test coverage in the future.
 The cleanups and fixes come from usual suspects such as Christophe Leroy and
 Aaron Tomlin but there are also some other contributors.
 
 One particular minor fix worth mentioning is from Helge Deller, where he spotted
 a *forever* incorrect natural alignment on both ELF section header tables:
 
   * .altinstructions
   * __bug_table sections
 
 A lot of back and forth went on in trying to determine the ill effects of this
 misalignment being present for years and it has been determined there should
 be no real ill effects unless you have a buggy exception handler. Helge actually
 hit one of these buggy exception handlers on parisc which is how he ended up
 spotting this issue. When implemented correctly these paths with incorrect
 misalignment would just mean a performance penalty, but given that we are
 dealing with alternatives on modules and with the __bug_table (where info
 regardign BUG()/WARN() file/line information associated with it is stored)
 this really shouldn't be a big deal.
 
 The only other change with mentioning is the kmap() with kmap_local_page()
 and my only concern with that was on what is done after preemption, but the
 virtual addresses are restored after preemption. This is only used on module
 decompression.
 
 This all has sit on linux-next for a while except the kmap stuff which has
 been there for 3 weeks.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmLxL4gSHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoin8AYP/iv/Oh/Zzh4UvZzkkOSzhf1qDgGhjFb0
 aFIODZzpEfZ5ix5GcLapB8/QIwQgxiIRa3WkTMc0uyv+mddlbKuILFnI9A1I+TQe
 N4gmKeYXwWRyxLa6y7/B3lVzuLxf4DpcxfS2c3A65MkYi09XPA9oXCy7JjzsmEiZ
 z2Lu8lTe6hg8VarBTogHBxiEU7ybfDCnHWj7/Oe6zz8tS/R0i0ndNBu9xmaCqSh7
 QC8++eqCaS+zfW0uTmnGDo1/zWLBblCZ5HAHG8bLlPHezUbekNz6G1D4CVwFyNQ8
 wy1Gjy8nFWc+rwUl1CTgJ+A7wodGrMCyt5SmcNUVBOWdlSmli5vFJp61ET6UdrV+
 +8owATwwIm8hbkIAI4037j7pMgrO27d130GRxFwgG9GNoqew2AM7y/9HrlmW49PE
 IqJA4Pm3zg26IhLIRcH7jLg3oKGuFf0nkMTDoooI5a9DlcsCXPuGd0FBw2WbR71D
 Px6dlVoAW0NrP2tm8YzkTKIT+aN+UId4Vdi2oFs1t8Sye/U+LCjvwrXPk13pZKdR
 VxfM1oVxeRwiAUq0VuIrnj7windF5Mpy2hDLHeWjzQmLcEGAtCYEGyxKTBkNTtPt
 gm9XBzT6Rbzi+Sc++ZoHYHe1g4T66sjYOp4N90sRRMD3FR97ZyW8eD01gwf6p1Uy
 aCOrA+sRHK3F
 =hPvl
 -----END PGP SIGNATURE-----

Merge tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull module updates from Luis Chamberlain:
 "For the 6.0 merge window the modules code shifts to cleanup and minor
  fixes effort. This becomes much easier to do and review now due to the
  code split to its own directory from effort on the last kernel
  release. I expect to see more of this with time and as we expand on
  test coverage in the future. The cleanups and fixes come from usual
  suspects such as Christophe Leroy and Aaron Tomlin but there are also
  some other contributors.

  One particular minor fix worth mentioning is from Helge Deller, where
  he spotted a *forever* incorrect natural alignment on both ELF section
  header tables:

    * .altinstructions
    * __bug_table sections

  A lot of back and forth went on in trying to determine the ill effects
  of this misalignment being present for years and it has been
  determined there should be no real ill effects unless you have a buggy
  exception handler. Helge actually hit one of these buggy exception
  handlers on parisc which is how he ended up spotting this issue. When
  implemented correctly these paths with incorrect misalignment would
  just mean a performance penalty, but given that we are dealing with
  alternatives on modules and with the __bug_table (where info regardign
  BUG()/WARN() file/line information associated with it is stored) this
  really shouldn't be a big deal.

  The only other change with mentioning is the kmap() with
  kmap_local_page() and my only concern with that was on what is done
  after preemption, but the virtual addresses are restored after
  preemption. This is only used on module decompression.

  This all has sit on linux-next for a while except the kmap stuff which
  has been there for 3 weeks"

* tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: Replace kmap() with kmap_local_page()
  module: Show the last unloaded module's taint flag(s)
  module: Use strscpy() for last_unloaded_module
  module: Modify module_flags() to accept show_state argument
  module: Move module's Kconfig items in kernel/module/
  MAINTAINERS: Update file list for module maintainers
  module: Use vzalloc() instead of vmalloc()/memset(0)
  modules: Ensure natural alignment for .altinstructions and __bug_table sections
  module: Increase readability of module_kallsyms_lookup_name()
  module: Fix ERRORs reported by checkpatch.pl
  module: Add support for default value for module async_probe
2022-08-08 14:12:19 -07:00
Linus Torvalds
eb5699ba31 Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA
 jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9
 kwS/13j38guulSlXRzDLmitbg81zAAI=
 =Zfum
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc updates from Andrew Morton:
 "Updates to various subsystems which I help look after. lib, ocfs2,
  fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
  material this time"

* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  scripts/gdb: ensure the absolute path is generated on initial source
  MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
  mailmap: add linux.dev alias for Brendan Higgins
  mailmap: update Kirill's email
  profile: setup_profiling_timer() is moslty not implemented
  ocfs2: fix a typo in a comment
  ocfs2: use the bitmap API to simplify code
  ocfs2: remove some useless functions
  lib/mpi: fix typo 'the the' in comment
  proc: add some (hopefully) insightful comments
  bdi: remove enum wb_congested_state
  kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
  lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
  squashfs: support reading fragments in readahead call
  squashfs: implement readahead
  squashfs: always build "file direct" version of page actor
  Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
  fs/ocfs2: Fix spelling typo in comment
  ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
  proc: fix test for "vsyscall=xonly" boot option
  ...
2022-08-07 10:03:24 -07:00
Linus Torvalds
b6bb70f9ab Several core optimizations:
* threadgroup_rwsem write locking is skipped when configuring controllers in
   empty subtrees. Combined with CLONE_INTO_CGROUP, this allows the common
   static usage pattern to not grab threadgroup_rwsem at all (glibc still
   doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
 
 * threadgroup_rwsem used to be put into non-percpu mode by default due to
   latency concerns in specific use cases. There's no reason for everyone
   else to pay for it. Make the behavior optional.
 
 * psi no longer allocates memory when disabled.
 
 along with some code cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYugHIQ4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGd+oAP9lfD3fTRdNo4qWV2VsZsYzoOxzNIuJSwN/dnYx
 IEbQOwD/cd2YMfeo6zcb427U/VfTFqjJjFK04OeljYtJU8fFywo=
 =sucy
 -----END PGP SIGNATURE-----

Merge tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:
 "Several core optimizations:

   - threadgroup_rwsem write locking is skipped when configuring
     controllers in empty subtrees.

     Combined with CLONE_INTO_CGROUP, this allows the common static
     usage pattern to not grab threadgroup_rwsem at all (glibc still
     doesn't seem ready for CLONE_INTO_CGROUP unfortunately).

   - threadgroup_rwsem used to be put into non-percpu mode by default
     due to latency concerns in specific use cases. There's no reason
     for everyone else to pay for it. Make the behavior optional.

   - psi no longer allocates memory when disabled.

  ... along with some code cleanups"

* tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Skip subtree root in cgroup_update_dfl_csses()
  cgroup: remove "no" prefixed mount options
  cgroup: Make !percpu threadgroup_rwsem operations optional
  cgroup: Add "no" prefixed mount options
  cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
  cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst
  cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes
  psi: dont alloc memory for psi by default
2022-08-03 09:45:08 -07:00
Linus Torvalds
aad26f55f4 This was a moderately busy cycle for documentation, but nothing all that
earth-shaking:
 
 - More Chinese translations, and an update to the Italian translations.
   The Japanese, Korean, and traditional Chinese translations are
   more-or-less unmaintained at this point, instead.
 
 - Some build-system performance improvements.
 
 - The removal of the archaic submitting-drivers.rst document, with the
   movement of what useful material that remained into other docs.
 
 - Improvements to sphinx-pre-install to, hopefully, give more useful
   suggestions.
 
 - A number of build-warning fixes
 
 Plus the usual collection of typo fixes, updates, and more.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmLn9OwPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YtrwIAJNZoDYJJIRuVHnFkAn5EJ4b/chnR1dSTBtn
 WdE/1zdAlMBWVlEGO48VZybph9Sk0v+cUGf+yviDgASQrfOhRRTkg/0u6XaBAYO0
 +C2D1QDd9DggGgajxsfJfTdD3IuB78mGmCQvP17XIJW+NK1CK9rXZBnj6WC5/HJw
 PCHzeeVreBxOS3W9GelMYa6vjVl7dv81x4DPllnsgU2AMk0/Ce0MVjeIZ695sOeP
 Ki6jZgC2GsgFSK5kBC35OiDe5q+fDzlLfek34EUCn4SIbMALSUYWO1db122w5Pme
 Ej0+UTBhD19WH1uB/rcVKnVWugi7UEUJexZsao+nC7UrdIVtYq0=
 =83BG
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.0' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "This was a moderately busy cycle for documentation, but nothing
  all that earth-shaking:

   - More Chinese translations, and an update to the Italian
     translations.

     The Japanese, Korean, and traditional Chinese translations
     are more-or-less unmaintained at this point, instead.

   - Some build-system performance improvements.

   - The removal of the archaic submitting-drivers.rst document,
     with the movement of what useful material that remained into
     other docs.

   - Improvements to sphinx-pre-install to, hopefully, give more
     useful suggestions.

   - A number of build-warning fixes

  Plus the usual collection of typo fixes, updates, and more"

* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
  docs: efi-stub: Fix paths for x86 / arm stubs
  Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
  Docs/zh_CN: Update the translation of pci to 5.19-rc8
  Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
  Docs/zh_CN: Update the translation of usage to 5.19-rc8
  Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
  Docs/zh_CN: Update the translation of sparse to 5.19-rc8
  Docs/zh_CN: Update the translation of kasan to 5.19-rc8
  Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
  doc:it_IT: align Italian documentation
  docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
  Documentation: process: Update email client instructions for Thunderbird
  docs: ABI: correct QEMU fw_cfg spec path
  doc/zh_CN: remove submitting-driver reference from docs
  docs: zh_TW: align to submitting-drivers removal
  docs: zh_CN: align to submitting-drivers removal
  docs: ko_KR: howto: remove reference to removed submitting-drivers
  docs: ja_JP: howto: remove reference to removed submitting-drivers
  docs: it_IT: align to submitting-drivers removal
  docs: process: remove outdated submitting-drivers.rst
  ...
2022-08-02 19:24:24 -07:00
Linus Torvalds
7d9d077c78 RCU pull request for v5.20 (or whatever)
This pull request contains the following branches:
 
 doc.2022.06.21a: Documentation updates.
 
 fixes.2022.07.19a: Miscellaneous fixes.
 
 nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new
 	RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to
 	be offloaded at boot time, regardless of kernel boot parameters.
 	This is useful to battery-powered systems such as ChromeOS
 	and Android.  In addition, a new RCU_NOCB_CPU_CB_BOOST kernel
 	boot parameter prevents offloaded callbacks from interfering
 	with real-time workloads and with energy-efficiency mechanisms.
 
 poll.2022.07.21a: Polled grace-period updates, perhaps most notably
 	making these APIs account for both normal and expedited grace
 	periods.
 
 rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing
 	the CPU overhead of RCU tasks trace grace periods by more than
 	a factor of two on a system with 15,000 tasks.	The reduction
 	is expected to increase with the number of tasks, so it seems
 	reasonable to hypothesize that a system with 150,000 tasks might
 	see a 20-fold reduction in CPU overhead.
 
 torture.2022.06.21a: Torture-test updates.
 
 ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into
 	context tracking, thus reducing the overhead of transitioning to
 	kernel mode from either idle or nohz_full userspace execution
 	for kernels that track context independently of RCU.  This is
 	expected to be helpful primarily for kernels built with
 	CONFIG_NO_HZ_FULL=y.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m
 g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq
 k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt
 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL
 kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5
 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0
 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc
 JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL
 PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc
 egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y
 ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r
 vX60+QNxvUBLwA==
 =vUNm
 -----END PGP SIGNATURE-----

Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Documentation updates

 - Miscellaneous fixes

 - Callback-offload updates, perhaps most notably a new
   RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
   offloaded at boot time, regardless of kernel boot parameters.

   This is useful to battery-powered systems such as ChromeOS and
   Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
   parameter prevents offloaded callbacks from interfering with
   real-time workloads and with energy-efficiency mechanisms

 - Polled grace-period updates, perhaps most notably making these APIs
   account for both normal and expedited grace periods

 - Tasks RCU updates, perhaps most notably reducing the CPU overhead of
   RCU tasks trace grace periods by more than a factor of two on a
   system with 15,000 tasks.

   The reduction is expected to increase with the number of tasks, so it
   seems reasonable to hypothesize that a system with 150,000 tasks
   might see a 20-fold reduction in CPU overhead

 - Torture-test updates

 - Updates that merge RCU's dyntick-idle tracking into context tracking,
   thus reducing the overhead of transitioning to kernel mode from
   either idle or nohz_full userspace execution for kernels that track
   context independently of RCU.

   This is expected to be helpful primarily for kernels built with
   CONFIG_NO_HZ_FULL=y

* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
  rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
  rcu: Diagnose extended sync_rcu_do_polled_gp() loops
  rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
  rcutorture: Test polled expedited grace-period primitives
  rcu: Add polled expedited grace-period primitives
  rcutorture: Verify that polled GP API sees synchronous grace periods
  rcu: Make Tiny RCU grace periods visible to polled APIs
  rcu: Make polled grace-period API account for expedited grace periods
  rcu: Switch polled grace-period APIs to ->gp_seq_polled
  rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
  rcu/nocb: Add option to opt rcuo kthreads out of RT priority
  rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
  rcu/nocb: Add an option to offload all CPUs on boot
  rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
  rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
  rcu/nocb: Add/del rdp to iterate from rcuog itself
  rcu/tree: Add comment to describe GP-done condition in fqs loop
  rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
  rcu/kvfree: Remove useless monitor_todo flag
  rcu: Cleanup RCU urgency state for offline CPU
  ...
2022-08-02 19:12:45 -07:00
Linus Torvalds
c2a24a7a03 This update includes the following changes:
API:
 
 - Make proc files report fips module name and version.
 
 Algorithms:
 
 - Move generic SHA1 code into lib/crypto.
 - Implement Chinese Remainder Theorem for RSA.
 - Remove blake2s.
 - Add XCTR with x86/arm64 acceleration.
 - Add POLYVAL with x86/arm64 acceleration.
 - Add HCTR2.
 - Add ARIA.
 
 Drivers:
 
 - Add support for new CCP/PSP device ID in ccp.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmLosAAACgkQxycdCkmx
 i6dvgxAAzcw0cKMuq3dbQamzeVu1bDW8rPb7yHnpXal3ao5ewa15+hFjsKhdh/s3
 cjM5Lu7Qx4lnqtsh2JVSU5o2SgEpptxXNfxAngcn46ld5EgV/G4DYNKuXsatMZ2A
 erCzXqG9dDxJmREat+5XgVfD1RFVsglmEA/Nv4Rvn+9O4O6PfwRa8GyUzeKC+byG
 qs/1JyiPqpyApgzCvlQFAdTF4PM7ruDtg3mnMy2EKAzqj4JUseXRi1i81vLVlfBL
 T40WESG/CnOwIF5MROhziAtkJMS4Y4v2VQ2++1p0gwG6pDCnq4w7u9cKPXYfNgZK
 fMVCxrNlxIH3W99VfVXbXwqDSN6qEZtQvhnliwj9aEbEltIoH+B02wNfS/BDsTec
 im+5NCnNQ6olMPyL0yHrMKisKd+DwTrEfYT5H2kFhcdcYZncQ9C6el57kimnJRzp
 4ymPRudCKm/8weWGTtmjFMi+PFP4LgvCoR+VMUd+gVe91F9ZMAO0K7b5z5FVDyDf
 wmsNBvsEnTdm/r7YceVzGwdKQaP9sE5wq8iD/yySD1PjlmzZos1CtCrqAIT/v2RK
 pQdZCIkT8qCB+Jm03eEd4pwjEDnbZdQmpKt4cTy0HWIeLJVG1sXPNpgwPCaBEV4U
 g0nctILtypChlSDmuGhTCyuElfMg6CXt4cgSZJTBikT+QcyWOm4=
 =rfWK
 -----END PGP SIGNATURE-----

Merge tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
"API:

   - Make proc files report fips module name and version

  Algorithms:

   - Move generic SHA1 code into lib/crypto

   - Implement Chinese Remainder Theorem for RSA

   - Remove blake2s

   - Add XCTR with x86/arm64 acceleration

   - Add POLYVAL with x86/arm64 acceleration

   - Add HCTR2

   - Add ARIA

  Drivers:

   - Add support for new CCP/PSP device ID in ccp"

* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
  crypto: tcrypt - Remove the static variable initialisations to NULL
  crypto: arm64/poly1305 - fix a read out-of-bound
  crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
  crypto: hisilicon/sec - fix auth key size error
  crypto: ccree - Remove a useless dma_supported() call
  crypto: ccp - Add support for new CCP/PSP device ID
  crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
  crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
  crypto: testmgr - some more fixes to RSA test vectors
  cyrpto: powerpc/aes - delete the rebundant word "block" in comments
  hwrng: via - Fix comment typo
  crypto: twofish - Fix comment typo
  crypto: rmd160 - fix Kconfig "its" grammar
  crypto: keembay-ocs-ecc - Drop if with an always false condition
  Documentation: qat: rewrite description
  Documentation: qat: Use code block for qat sysfs example
  crypto: lib - add module license to libsha1
  crypto: lib - make the sha1 library optional
  crypto: lib - move lib/sha1.c into lib/crypto/
  crypto: fips - make proc files report fips module name and version
  ...
2022-08-02 17:45:14 -07:00
Baruch Siach
bdf0fe33a4 init/Kconfig: update KALLSYMS_ALL help text
CONFIG_KALLSYMS_ALL is required for kernel live patching which is a
common use case that is enabled in some major distros. Update the
Kconfig help text to reflect that.

While at it, s/e.g./i.e./ to match the text intention.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-07-27 21:17:59 +09:00
Nick Desaulniers
a6036a41bf kbuild: drop support for CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3
The difference in most compilers between `-O3` and `-O2` is mostly down
to whether loops with statically determinable trip counts are fully
unrolled vs unrolled to a multiple of SIMD width.

This patch is effectively a revert of
commit 15f5db60a1 ("kbuild,arc: add
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC") without re-adding
ARCH_CFLAGS

Ever since
commit cfdbc2e16e ("ARC: Build system: Makefiles, Kconfig, Linker
script")
ARC has been built with -O3, though the reason for doing so was not
specified in inline comments or the commit message. This commit does not
re-add -O3 to arch/arc/Makefile.

Folks looking to experiment with `-O3` (or any compiler flag for that
matter) may pass them along to the command line invocation of make:

$ make KCFLAGS=-O3

Code that looks to re-add an explicit Kconfig option for `-O3` should
provide:
1. A rigorous and reproducible performance profile of a reasonable
   userspace workload that demonstrates a hot loop in the kernel that
   would benefit from `-O3` over `-O2`.
2. Disassembly of said loop body before and after.
3. Provides stats on terms of increase in file size.

Link: https://lore.kernel.org/linux-kbuild/CA+55aFz2sNBbZyg-_i8_Ldr2e8o9dfvdSfHHuRzVtP2VMAUWPg@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-07-27 21:17:59 +09:00
Tejun Heo
6a010a49b6 cgroup: Make !percpu threadgroup_rwsem operations optional
3942a9bd7b ("locking, rcu, cgroup: Avoid synchronize_sched() in
__cgroup_procs_write()") disabled percpu operations on threadgroup_rwsem
because the impiled synchronize_rcu() on write locking was pushing up the
latencies too much for android which constantly moves processes between
cgroups.

This makes the hotter paths - fork and exit - slower as they're always
forced into the slow path. There is no reason to force this on everyone
especially given that more common static usage pattern can now completely
avoid write-locking the rwsem. Write-locking is elided when turning on and
off controllers on empty sub-trees and CLONE_INTO_CGROUP enables seeding a
cgroup without grabbing the rwsem.

Restore the default percpu operations and introduce the mount option
"favordynmods" and config option CGROUP_FAVOR_DYNMODS for users who need
lower latencies for the dynamic operations.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Michal Koutn� <mkoutny@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
2022-07-23 04:29:02 -10:00
Paul E. McKenney
34bc7b454d Merge branch 'ctxt.2022.07.05a' into HEAD
ctxt.2022.07.05a: Linux-kernel memory model development branch.
2022-07-21 17:46:18 -07:00
Dan Moulding
5a704629f2 init: add "hostname" kernel parameter
The gethostname system call returns the hostname for the current machine. 
However, the kernel has no mechanism to initially set the current
machine's name in such a way as to guarantee that the first userspace
process to call gethostname will receive a meaningful result.  It relies
on some unspecified userspace process to first call sethostname before
gethostname can produce a meaningful name.

Traditionally the machine's hostname is set from userspace by the init
system.  The init system, in turn, often relies on a configuration file
(say, /etc/hostname) to provide the value that it will supply in the call
to sethostname.  Consequently, the file system containing /etc/hostname
usually must be available before the hostname will be set.  There may,
however, be earlier userspace processes that could call gethostname before
the file system containing /etc/hostname is mounted.  Such a process will
get some other, likely meaningless, name from gethostname (such as
"(none)", "localhost", or "darkstar").

A real-world example where this can happen, and lead to undesirable
results, is with mdadm.  When assembling arrays, mdadm distinguishes
between "local" arrays and "foreign" arrays.  A local array is one that
properly belongs to the current machine, and a foreign array is one that
is (possibly temporarily) attached to the current machine, but properly
belongs to some other machine.  To determine if an array is local or
foreign, mdadm may compare the "homehost" recorded on the array with the
current hostname.  If mdadm is run before the root file system is mounted,
perhaps because the root file system itself resides on an md-raid array,
then /etc/hostname isn't yet available and the init system will not yet
have called sethostname, causing mdadm to incorrectly conclude that all of
the local arrays are foreign.

Solving this problem *could* be delegated to the init system.  It could be
left up to the init system (including any init system that starts within
an initramfs, if one is in use) to ensure that sethostname is called
before any other userspace process could possibly call gethostname. 
However, it may not always be obvious which processes could call
gethostname (for example, udev itself might not call gethostname, but it
could via udev rules invoke processes that do).  Additionally, the init
system has to ensure that the hostname configuration value is stored in
some place where it will be readily accessible during early boot. 
Unfortunately, every init system will attempt to (or has already attempted
to) solve this problem in a different, possibly incorrect, way.  This
makes getting consistently working configurations harder for users.

I believe it is better for the kernel to provide the means by which the
hostname may be set early, rather than making this a problem for the init
system to solve.  The option to set the hostname during early startup, via
a kernel parameter, provides a simple, reliable way to solve this problem.
It also could make system configuration easier for some embedded systems.

[dmoulding@me.com: v2]
  Link: https://lkml.kernel.org/r/20220506060310.7495-2-dmoulding@me.com
Link: https://lkml.kernel.org/r/20220505180651.22849-2-dmoulding@me.com
Signed-off-by: Dan Moulding <dmoulding@me.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-17 17:31:37 -07:00
Eric Biggers
ec8f7f4821 crypto: lib - make the sha1 library optional
Since the Linux RNG no longer uses sha1_transform(), the SHA-1 library
is no longer needed unconditionally.  Make it possible to build the
Linux kernel without the SHA-1 library by putting it behind a kconfig
option, and selecting this new option from the kconfig options that gate
the remaining users: CRYPTO_SHA1 for crypto/sha1_generic.c, BPF for
kernel/bpf/core.c, and IPV6 for net/ipv6/addrconf.c.

Unfortunately, since BPF is selected by NET, for now this can only make
a difference for kernels built without networking support.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15 16:43:59 +08:00
Christophe Leroy
73b4fc92f9 module: Move module's Kconfig items in kernel/module/
In init/Kconfig, the part dedicated to modules is quite large.

Move it into a dedicated Kconfig in kernel/module/

MODULES_TREE_LOOKUP was outside of the 'if MODULES', but as it is
only used when MODULES are set, move it in with everything else to
avoid confusion.

MODULE_SIG_FORMAT is left in init/Kconfig because this configuration
item is not used in kernel/modules/ but in kernel/ and can be
selected independently from CONFIG_MODULES. It is for instance
selected from security/integrity/ima/Kconfig.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-12 12:07:25 -07:00
Mauro Carvalho Chehab
c02b872a7c Documentation: update watch_queue.rst references
Changeset f5461124d5 ("Documentation: move watch_queue to core-api")
renamed: Documentation/watch_queue.rst
to: Documentation/core-api/watch_queue.rst.

Update the cross-references accordingly.

Fixes: f5461124d5 ("Documentation: move watch_queue to core-api")
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/1c220de9c58f35e815a3df9458ac2bea323c8bfb.1656234456.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-07-07 13:09:59 -06:00
GONG, Ruiqi
375561bd61 stack: Declare {randomize_,}kstack_offset to fix Sparse warnings
Fix the following Sparse warnings that got noticed when the PPC-dev
patchwork was checking another patch (see the link below):

init/main.c:862:1: warning: symbol 'randomize_kstack_offset' was not declared. Should it be static?
init/main.c:864:1: warning: symbol 'kstack_offset' was not declared. Should it be static?

Which in fact are triggered on all architectures that have
HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET support (for instances x86, arm64
etc).

Link: https://lore.kernel.org/lkml/e7b0d68b-914d-7283-827c-101988923929@huawei.com/T/#m49b2d4490121445ce4bf7653500aba59eefcb67f
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 39218ff4c6 ("stack: Optionally randomize kernel stack offset each syscall")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220629060423.2515693-1-gongruiqi1@huawei.com
2022-07-01 18:01:47 -07:00
Frederic Weisbecker
24a9c54182 context_tracking: Split user tracking Kconfig
Context tracking is going to be used not only to track user transitions
but also idle/IRQs/NMIs. The user tracking part will then become a
separate feature. Prepare Kconfig for that.

[ frederic: Apply Max Filippov feedback. ]

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-06-29 17:04:09 -07:00
Paul E. McKenney
434c9eefb9 rcu-tasks: Add data structures for lightweight grace periods
This commit adds fields to task_struct and to rcu_tasks_percpu that will
be used to avoid the task-list scan for RCU Tasks Trace grace periods,
and also initializes these fields.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
2022-06-20 09:22:28 -07:00
Linus Torvalds
f0be87c42c gcc-12: disable '-Warray-bounds' universally for now
In commit 8b202ee218 ("s390: disable -Warray-bounds") the s390 people
disabled the '-Warray-bounds' warning for gcc-12, because the new logic
in gcc would cause warnings for their use of the S390_lowcore macro,
which accesses absolute pointers.

It turns out gcc-12 has many other issues in this area, so this takes
that s390 warning disable logic, and turns it into a kernel build config
entry instead.

Part of the intent is that we can make this all much more targeted, and
use this conflig flag to disable it in only particular configurations
that cause problems, with the s390 case as an example:

        select GCC12_NO_ARRAY_BOUNDS

and we could do that for other configuration cases that cause issues.

Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more
targeted way, and disable the warning only for particular uses: again
the s390 case as an example:

  KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_CC_NO_ARRAY_BOUNDS),-Wno-array-bounds)

but this ends up just doing it globally in the top-level Makefile, since
the current issues are spread fairly widely all over:

  KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds

We'll try to limit this later, since the gcc-12 problems are rare enough
that *much* of the kernel can be built with it without disabling this
warning.

Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09 10:11:12 -07:00
Linus Torvalds
1ec6574a3c This set of changes updates init and user mode helper tasks to be
ordinary user mode tasks.
 
 In commit 40966e316f ("kthread: Ensure struct kthread is present for
 all kthreads") caused init and the user mode helper threads that call
 kernel_execve to have struct kthread allocated for them.  This struct
 kthread going away during execve in turned made a use after free of
 struct kthread possible.
 
 The commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
 init and umh") is enough to fix the use after free and is simple enough
 to be backportable.
 
 The rest of the changes pass struct kernel_clone_args to clean things
 up and cause the code to make sense.
 
 In making init and the user mode helpers tasks purely user mode tasks
 I ran into two complications.  The function task_tick_numa was
 detecting tasks without an mm by testing for the presence of
 PF_KTHREAD.  The initramfs code in populate_initrd_image was using
 flush_delayed_fput to ensuere the closing of all it's file descriptors
 was complete, and flush_delayed_fput does not work in a userspace thread.
 
 I have looked and looked and more complications and in my code review
 I have not found any, and neither has anyone else with the code sitting
 in linux-next.
 
 Link: https://lkml.kernel.org/r/87mtfu4up3.fsf@email.froward.int.ebiederm.org
 
 Eric W. Biederman (8):
       kthread: Don't allocate kthread_struct for init and umh
       fork: Pass struct kernel_clone_args into copy_thread
       fork: Explicity test for idle tasks in copy_thread
       fork: Generalize PF_IO_WORKER handling
       init: Deal with the init process being a user mode process
       fork: Explicitly set PF_KTHREAD
       fork: Stop allowing kthreads to call execve
       sched: Update task_tick_numa to ignore tasks without an mm
 
  arch/alpha/kernel/process.c      | 13 ++++++------
  arch/arc/kernel/process.c        | 13 ++++++------
  arch/arm/kernel/process.c        | 12 ++++++-----
  arch/arm64/kernel/process.c      | 12 ++++++-----
  arch/csky/kernel/process.c       | 15 ++++++-------
  arch/h8300/kernel/process.c      | 10 ++++-----
  arch/hexagon/kernel/process.c    | 12 ++++++-----
  arch/ia64/kernel/process.c       | 15 +++++++------
  arch/m68k/kernel/process.c       | 12 ++++++-----
  arch/microblaze/kernel/process.c | 12 ++++++-----
  arch/mips/kernel/process.c       | 13 ++++++------
  arch/nios2/kernel/process.c      | 12 ++++++-----
  arch/openrisc/kernel/process.c   | 12 ++++++-----
  arch/parisc/kernel/process.c     | 18 +++++++++-------
  arch/powerpc/kernel/process.c    | 15 +++++++------
  arch/riscv/kernel/process.c      | 12 ++++++-----
  arch/s390/kernel/process.c       | 12 ++++++-----
  arch/sh/kernel/process_32.c      | 12 ++++++-----
  arch/sparc/kernel/process_32.c   | 12 ++++++-----
  arch/sparc/kernel/process_64.c   | 12 ++++++-----
  arch/um/kernel/process.c         | 15 +++++++------
  arch/x86/include/asm/fpu/sched.h |  2 +-
  arch/x86/include/asm/switch_to.h |  8 +++----
  arch/x86/kernel/fpu/core.c       |  4 ++--
  arch/x86/kernel/process.c        | 18 +++++++++-------
  arch/xtensa/kernel/process.c     | 17 ++++++++-------
  fs/exec.c                        |  8 ++++---
  include/linux/sched/task.h       |  8 +++++--
  init/initramfs.c                 |  2 ++
  init/main.c                      |  2 +-
  kernel/fork.c                    | 46 +++++++++++++++++++++++++++++++++-------
  kernel/sched/fair.c              |  2 +-
  kernel/umh.c                     |  6 +++---
  33 files changed, 234 insertions(+), 160 deletions(-)
 
 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEgjlraLDcwBA2B+6cC/v6Eiajj0AFAmKaR/MACgkQC/v6Eiaj
 j0Aayg/7Bx66872d9c6igkJ+MPCTuh+v9QKCGwiYEmiU4Q5sVAFB0HPJO27qC14u
 630X0RFNZTkPzNNEJNIW4kw6Dj8s8YRKf+FgQAVt4SzdRwT7eIPDjk1nGraopPJ3
 O04pjvuTmUyidyViRyFcf2ptx/pnkrwP8jUSc+bGTgfASAKAgAokqKE5ecjewbBc
 Y/EAkQ6QW7KxPjeSmpAHwI+t3BpBev9WEC4PbhRhsBCQFO2+PJiklvqdhVNBnIjv
 qUezll/1xv9UYgniB15Q4Nb722SmnWSU3r8as1eFPugzTHizKhufrrpyP+KMK1A0
 tdtEJNs5t2DZF7ZbGTFSPqJWmyTYLrghZdO+lOmnaSjHxK4Nda1d4NzbefJ0u+FE
 tutewowvHtBX6AFIbx+H3O+DOJM2IgNMf+ReQDU/TyNyVf3wBrTbsr9cLxypIJIp
 zze8npoLMlB7B4yxVo5ES5e63EXfi3iHl0L3/1EhoGwriRz1kWgVLUX/VZOUpscL
 RkJHsW6bT8sqxPWAA5kyWjEN+wNR2PxbXi8OE4arT0uJrEBMUgDCzydzOv5tJB00
 mSQdytxH9LVdsmxBKAOBp5X6WOLGA4yb1cZ6E/mEhlqXMpBDF1DaMfwbWqxSYi4q
 sp5zU3SBAW0qceiZSsWZXInfbjrcQXNV/DkDRDO9OmzEZP4m1j0=
 =x6fy
 -----END PGP SIGNATURE-----

Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull kthread updates from Eric Biederman:
 "This updates init and user mode helper tasks to be ordinary user mode
  tasks.

  Commit 40966e316f ("kthread: Ensure struct kthread is present for
  all kthreads") caused init and the user mode helper threads that call
  kernel_execve to have struct kthread allocated for them. This struct
  kthread going away during execve in turned made a use after free of
  struct kthread possible.

  Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
  init and umh") is enough to fix the use after free and is simple
  enough to be backportable.

  The rest of the changes pass struct kernel_clone_args to clean things
  up and cause the code to make sense.

  In making init and the user mode helpers tasks purely user mode tasks
  I ran into two complications. The function task_tick_numa was
  detecting tasks without an mm by testing for the presence of
  PF_KTHREAD. The initramfs code in populate_initrd_image was using
  flush_delayed_fput to ensuere the closing of all it's file descriptors
  was complete, and flush_delayed_fput does not work in a userspace
  thread.

  I have looked and looked and more complications and in my code review
  I have not found any, and neither has anyone else with the code
  sitting in linux-next"

* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sched: Update task_tick_numa to ignore tasks without an mm
  fork: Stop allowing kthreads to call execve
  fork: Explicitly set PF_KTHREAD
  init: Deal with the init process being a user mode process
  fork: Generalize PF_IO_WORKER handling
  fork: Explicity test for idle tasks in copy_thread
  fork: Pass struct kernel_clone_args into copy_thread
  kthread: Don't allocate kthread_struct for init and umh
2022-06-03 16:03:05 -07:00
Linus Torvalds
35b51afd23 RISC-V Patches for the 5.19 Merge Window, Part 1
* Support for the Svpbmt extension, which allows memory attributes to be
   encoded in pages.
 * Support for the Allwinner D1's implementation of page-based memory
   attributes.
 * Support for running rv32 binaries on rv64 systems, via the compat
   subsystem.
 * Support for kexec_file().
 * Support for the new generic ticket-based spinlocks, which allows us to
   also move to qrwlock.  These should have already gone in through the
   asm-geneic tree as well.
 * A handful of cleanups and fixes, include some larger ones around
   atomics and XIP.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmKWOx8THHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYieAiEADAUdP7ctoaSQwk5skd/fdA3b4KJuKn
 1Zjl+Br32WP0DlbirYBYWRUQZnCCsvABbTiwSJMcG7NBpU5pyQ5XDtB3OA5kJswO
 Fdp8Nd53//+GK1M5zdEM9OdgvT9fbfTZ3qTu8bKsROOQhGwnYL+Csc9KjFRqEmzN
 oQii0jlb3n5PM4FL3GsbV4uMn9zzkP9mnVAPQktcock2EKFEK/Fy3uNYMQiO2KPi
 n8O6bIDaeRdQ6SurzWOuOkt0cro0tEF85ilzT04mynQsOU0el5oGqCxnOhNH3VWg
 ndqPT6Yafw12hZOtbKJeP+nF8IIR6aJLP3jOtRwEVgcfbXYAw4QwbAV8kQZISefN
 ipn8JGY7GX9Y9TYU692OUGkcmAb3/dxb6c0WihBdvJ0M6YyLD5X+YKHNuG2onLgK
 ss43C5Mxsu629rsjdu/PV91B1+pve3rG9siVmF+g4eo0x9rjMq6/JB0Kal/8SLI1
 Je5T55d5ujV1a2XxhZLQOSD5owrK7J1M9owb0bloTnr9nVwFTWDrfEQEU82o3kP+
 Xm+FfXktnz9ai55NjkMbbEur5D++dKJhBavwCTnBcTrJmMtEH0R45GTK9ZehP+WC
 rNVrRXjIsS18wsTfJxnkZeFQA38as6VBKTzvwHvOgzTrrZU1/xk3lpkouYtAO6BG
 gKacHshVilmUuA==
 =Loi6
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the Svpbmt extension, which allows memory attributes to
   be encoded in pages

 - Support for the Allwinner D1's implementation of page-based memory
   attributes

 - Support for running rv32 binaries on rv64 systems, via the compat
   subsystem

 - Support for kexec_file()

 - Support for the new generic ticket-based spinlocks, which allows us
   to also move to qrwlock. These should have already gone in through
   the asm-geneic tree as well

 - A handful of cleanups and fixes, include some larger ones around
   atomics and XIP

* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
  riscv: compat: Using seperated vdso_maps for compat_vdso_info
  RISC-V: Fix the XIP build
  RISC-V: Split out the XIP fixups into their own file
  RISC-V: ignore xipImage
  RISC-V: Avoid empty create_*_mapping definitions
  riscv: Don't output a bogus mmu-type on a no MMU kernel
  riscv: atomic: Add custom conditional atomic operation implementation
  riscv: atomic: Optimize dec_if_positive functions
  riscv: atomic: Cleanup unnecessary definition
  RISC-V: Load purgatory in kexec_file
  RISC-V: Add purgatory
  RISC-V: Support for kexec_file on panic
  RISC-V: Add kexec_file support
  RISC-V: use memcpy for kexec_file mode
  kexec_file: Fix kexec_file.c build error for riscv platform
  riscv: compat: Add COMPAT Kbuild skeletal support
  riscv: compat: ptrace: Add compat_arch_ptrace implement
  riscv: compat: signal: Add rt_frame implementation
  riscv: add memory-type errata for T-Head
  ...
2022-05-31 14:10:54 -07:00
Linus Torvalds
76bfd3de34 tracing updates for 5.19:
- The majority of the changes are for fixes and clean ups.
 
 Noticeable changes:
 
 - Rework trace event triggers code to be easier to interact with.
 
 - Support for embedding bootconfig with the kernel (as suppose to having it
   embedded in initram). This is useful for embedded boards without initram
   disks.
 
 - Speed up boot by parallelizing the creation of tracefs files.
 
 - Allow absolute ring buffer timestamps handle timestamps that use more than
   59 bits.
 
 - Added new tracing clock "TAI" (International Atomic Time)
 
 - Have weak functions show up in available_filter_function list as:
    __ftrace_invalid_address___<invalid-offset>
   instead of using the name of the function before it.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYpOgXRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qjkKAQDbpemxvpFyJlZqT8KgEIXubu+ag2/q
 p0XDHaPS0zF9OQEAjTxg6GMEbnFYl6fzxZtOoEbiaQ7ppfdhRI8t6sSMVA8=
 =+nDD
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "The majority of the changes are for fixes and clean ups.

  Notable changes:

   - Rework trace event triggers code to be easier to interact with.

   - Support for embedding bootconfig with the kernel (as suppose to
     having it embedded in initram). This is useful for embedded boards
     without initram disks.

   - Speed up boot by parallelizing the creation of tracefs files.

   - Allow absolute ring buffer timestamps handle timestamps that use
     more than 59 bits.

   - Added new tracing clock "TAI" (International Atomic Time)

   - Have weak functions show up in available_filter_function list as:
     __ftrace_invalid_address___<invalid-offset> instead of using the
     name of the function before it"

* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
  ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
  tracing: Fix comments for event_trigger_separate_filter()
  x86/traceponit: Fix comment about irq vector tracepoints
  x86,tracing: Remove unused headers
  ftrace: Clean up hash direct_functions on register failures
  tracing: Fix comments of create_filter()
  tracing: Disable kcov on trace_preemptirq.c
  tracing: Initialize integer variable to prevent garbage return value
  ftrace: Fix typo in comment
  ftrace: Remove return value of ftrace_arch_modify_*()
  tracing: Cleanup code by removing init "char *name"
  tracing: Change "char *" string form to "char []"
  tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
  tracing/timerlat: Print stacktrace in the IRQ handler if needed
  tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
  kprobes: Fix build errors with CONFIG_KRETPROBES=n
  tracing: Fix return value of trace_pid_write()
  tracing: Fix potential double free in create_var_ref()
  tracing: Use strim() to remove whitespace instead of doing it manually
  ftrace: Deal with error return code of the ftrace_process_locs() function
  ...
2022-05-29 10:31:36 -07:00
Linus Torvalds
8291eaafed Two followon fixes for the post-5.19 series "Use pageblock_order for cma
and alloc_contig_range alignment", from Zi Yan.
 
 A series of z3fold cleanups and fixes from Miaohe Lin.
 
 Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
 
 Some swap fixes and cleanups from Miaohe Lin.
 
 Several individual minor fixups.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpEE7QAKCRDdBJ7gKXxA
 jlamAP9WmjNdx+5Pz5OkkaSjBO7y7vBrBTcQ9e5pz8bUWRoQhwEA+WtsssLmq9aI
 7DBDmBKYCMTbzOQTqaMRHkB+JWZo+Ao=
 =L3f1
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more MM updates from Andrew Morton:

 - Two follow-on fixes for the post-5.19 series "Use pageblock_order for
   cma and alloc_contig_range alignment", from Zi Yan.

 - A series of z3fold cleanups and fixes from Miaohe Lin.

 - Some memcg selftests work from Michal Koutný <mkoutny@suse.com>

 - Some swap fixes and cleanups from Miaohe Lin

 - Several individual minor fixups

* tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
  mm/shmem.c: suppress shift warning
  mm: Kconfig: reorganize misplaced mm options
  mm: kasan: fix input of vmalloc_to_page()
  mm: fix is_pinnable_page against a cma page
  mm: filter out swapin error entry in shmem mapping
  mm/shmem: fix infinite loop when swap in shmem error at swapoff time
  mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
  mm/swapfile: fix lost swap bits in unuse_pte()
  mm/swapfile: unuse_pte can map random data if swap read fails
  selftests: memcg: factor out common parts of memory.{low,min} tests
  selftests: memcg: remove protection from top level memcg
  selftests: memcg: adjust expected reclaim values of protected cgroups
  selftests: memcg: expect no low events in unprotected sibling
  selftests: memcg: fix compilation
  mm/z3fold: fix z3fold_page_migrate races with z3fold_map
  mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
  mm/z3fold: always clear PAGE_CLAIMED under z3fold page lock
  mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
  revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
  mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
  ...
2022-05-27 11:40:49 -07:00
Linus Torvalds
6f664045c8 Not a lot of material this cycle. Many singleton patches against various
subsystems.   Most notably some maintenance work in ocfs2 and initramfs.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo/6xQAKCRDdBJ7gKXxA
 jkD9AQCPczLBbRWpe1edL+5VHvel9ePoHQmvbHQnufdTh9rB5QEAu0Uilxz4q9cx
 xSZypNhj2n9f8FCYca/ZrZneBsTnAA8=
 =AJEO
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc updates from Andrew Morton:
 "The non-MM patch queue for this merge window.

  Not a lot of material this cycle. Many singleton patches against
  various subsystems. Most notably some maintenance work in ocfs2
  and initramfs"

* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
  kcov: update pos before writing pc in trace function
  ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
  ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
  fs/ntfs: remove redundant variable idx
  fat: remove time truncations in vfat_create/vfat_mkdir
  fat: report creation time in statx
  fat: ignore ctime updates, and keep ctime identical to mtime in memory
  fat: split fat_truncate_time() into separate functions
  MAINTAINERS: add Muchun as a memcg reviewer
  proc/sysctl: make protected_* world readable
  ia64: mca: drop redundant spinlock initialization
  tty: fix deadlock caused by calling printk() under tty_port->lock
  relay: remove redundant assignment to pointer buf
  fs/ntfs3: validate BOOT sectors_per_clusters
  lib/string_helpers: fix not adding strarray to device's resource list
  kernel/crash_core.c: remove redundant check of ck_cmdline
  ELF, uapi: fixup ELF_ST_TYPE definition
  ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
  ipc: update semtimedop() to use hrtimer
  ipc/sem: remove redundant assignments
  ...
2022-05-27 11:22:03 -07:00
Vlastimil Babka
0710d0122a mm: Kconfig: reorganize misplaced mm options
After commits 7b42f1041c ("mm: Kconfig: move swap and slab config
options to the MM section") and 519bcb7979 ("mm: Kconfig: group swap,
slab, hotplug and thp options into submenus") we now have nicely organized
mm related config options.  I have noticed some that were still misplaced,
so this moves them from various places into the new structure:

VM_EVENT_COUNTERS, COMPAT_BRK, MMAP_ALLOW_UNINITIALIZED to mm/Kconfig and
general MM section.

SLUB_STATS to mm/Kconfig and the slab submenu.

DEBUG_SLAB, SLUB_DEBUG, SLUB_DEBUG_ON to mm/Kconfig.debug and the Kernel
hacking / Memory Debugging submenu.

Link: https://lkml.kernel.org/r/20220525112559.1139-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27 09:33:47 -07:00
Linus Torvalds
ef98f9cfe2 Modules updates for v5.19-rc1
As promised, for v5.19 I queued up quite a bit of work for modules, but
 still with a pretty conservative eye. These changes have been soaking on
 modules-next (and so linux-next) for quite some time, the code shift was
 merged onto modules-next on March 22, and the last patch was queued on May
 5th.
 
 The following are the highlights of what bells and whistles we will get for
 v5.19:
 
  1) It was time to tidy up kernel/module.c and one way of starting with
     that effort was to split it up into files. At my request Aaron Tomlin
     spearheaded that effort with the goal to not introduce any
     functional at all during that endeavour.  The penalty for the split
     is +1322 bytes total, +112 bytes in data, +1210 bytes in text while
     bss is unchanged. One of the benefits of this other than helping
     make the code easier to read and review is summoning more help on review
     for changes with livepatching so kernel/module/livepatch.c is now
     pegged as maintained by the live patching folks.
 
     The before and after with just the move on a defconfig on x86-64:
 
      $ size kernel/module.o
         text    data     bss     dec     hex filename
        38434    4540     104   43078    a846 kernel/module.o
 
      $ size -t kernel/module/*.o
         text    data     bss     dec     hex filename
        4785     120       0    4905    1329 kernel/module/kallsyms.o
       28577    4416     104   33097    8149 kernel/module/main.o
        1158       8       0    1166     48e kernel/module/procfs.o
         902     108       0    1010     3f2 kernel/module/strict_rwx.o
        3390       0       0    3390     d3e kernel/module/sysfs.o
         832       0       0     832     340 kernel/module/tree_lookup.o
       39644    4652     104   44400    ad70 (TOTALS)
 
  2) Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
     so to enable tracking unloaded modules which did taint the kernel.
 
  3) Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
     which lets architectures to request having modules data in vmalloc
     area instead of module area. There are three reasons why an
     architecture might want this:
 
     a) On some architectures (like book3s/32) it is not possible to protect
        against execution on a page basis. The exec stuff can be mapped by
        different arch segment sizes (on book3s/32 that is 256M segments). By
        default the module area is in an Exec segment while vmalloc area is in
        a NoExec segment. Using vmalloc lets you muck with module data as
        NoExec on those architectures whereas before you could not.
 
     b) By pushing more module data to vmalloc you also increase the
        probability of module text to remain within a closer distance
        from kernel core text and this reduces trampolines, this has been
        reported on arm first and powerpc folks are following that lead.
 
     c) Free'ing module_alloc() (Exec by default) area leaves this
        exposed as Exec by default, some architectures have some
        security enhancements to set this as NoExec on free, and splitting
        module data with text let's future generic special allocators
        be added to the kernel without having developers try to grok
        the tribal knowledge per arch. Work like Rick Edgecombe's
        permission vmalloc interface [0] becomes easier to address over
        time.
 
        [0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r
 
  4) Masahiro Yamada's symbol search enhancements
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmKOnHkSHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinFw4P/1ADdvfj+b6wbAxou6tPa2ZKnx/ImEnE
 0T1P/n2guWg+2Q8oYjqifTpadGzr8td4c/PaGb5UpfdEOdBIyIGklrVZpQ+xkqfT
 X4KIvqsf4ajL24OKxOSNtvL8RXEIDUhJ4Veq6BImBk8CPrPjsUBlNyAIlvV0aom2
 BsFROQ2pMTSCiFY47gkMKLBlBny1l7zktoF0lhWTzHimw8VSDbTJFlu+fZvspd0o
 lCqiHTkpiBSJDSEEjqk0lT6wIb27fvdzjmjy+Ur71bBKiPIEPiL5XNUufkGe6oB3
 mnTOPow+wPTQc0dtkTpCHQYXE/a70Sbkwp1JfkbSYeHzJLlFru/tkmKiwN0RUo9l
 0mY7VPEKuQWmxsOkLqvwcPBGx5JOSWOJKrbgpFmH+RLgeEgEa8t7uQDURK2KeIj8
 P7ZzN5M2klKIHHA4vjfekYOJAb1Tii9Ibp7iGeiYxf93mPJBqwvRwbtBXBZpB4ce
 FoDrxwEq812KPW7P2O1kgOvq7Fn1KWh0wVeKc8iBGxFxJhzOQY86H1ZRWDLAxRss
 Rr1PMLt2TbTLUBt7MzR4vrg0NoQvpLYyf2jGFjWyZDRHU8nLeHkOlQot3xRDAtq9
 Bpx5mSlM9BGfPibd1Kw4BaxBha5vVCQ+AcleT+NWnCjw4I0wLoFi9RLUSyItn9No
 tlHLgdrM2a54
 =cxtr
 -----END PGP SIGNATURE-----

Merge tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull modules updates from  Luis Chamberlain:

 - It was time to tidy up kernel/module.c and one way of starting with
   that effort was to split it up into files. At my request Aaron Tomlin
   spearheaded that effort with the goal to not introduce any functional
   at all during that endeavour. The penalty for the split is +1322
   bytes total, +112 bytes in data, +1210 bytes in text while bss is
   unchanged. One of the benefits of this other than helping make the
   code easier to read and review is summoning more help on review for
   changes with livepatching so kernel/module/livepatch.c is now pegged
   as maintained by the live patching folks.

   The before and after with just the move on a defconfig on x86-64:

     $ size kernel/module.o
        text    data     bss     dec     hex filename
       38434    4540     104   43078    a846 kernel/module.o

     $ size -t kernel/module/*.o
        text    data     bss     dec     hex filename
       4785     120       0    4905    1329 kernel/module/kallsyms.o
      28577    4416     104   33097    8149 kernel/module/main.o
       1158       8       0    1166     48e kernel/module/procfs.o
        902     108       0    1010     3f2 kernel/module/strict_rwx.o
       3390       0       0    3390     d3e kernel/module/sysfs.o
        832       0       0     832     340 kernel/module/tree_lookup.o
      39644    4652     104   44400    ad70 (TOTALS)

 - Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
   to enable tracking unloaded modules which did taint the kernel.

 - Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
   which lets architectures to request having modules data in vmalloc
   area instead of module area. There are three reasons why an
   architecture might want this:

    a) On some architectures (like book3s/32) it is not possible to
       protect against execution on a page basis. The exec stuff can be
       mapped by different arch segment sizes (on book3s/32 that is 256M
       segments). By default the module area is in an Exec segment while
       vmalloc area is in a NoExec segment. Using vmalloc lets you muck
       with module data as NoExec on those architectures whereas before
       you could not.

    b) By pushing more module data to vmalloc you also increase the
       probability of module text to remain within a closer distance
       from kernel core text and this reduces trampolines, this has been
       reported on arm first and powerpc folks are following that lead.

    c) Free'ing module_alloc() (Exec by default) area leaves this
       exposed as Exec by default, some architectures have some security
       enhancements to set this as NoExec on free, and splitting module
       data with text let's future generic special allocators be added
       to the kernel without having developers try to grok the tribal
       knowledge per arch. Work like Rick Edgecombe's permission vmalloc
       interface [0] becomes easier to address over time.

       [0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r

 - Masahiro Yamada's symbol search enhancements

* tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits)
  module: merge check_exported_symbol() into find_exported_symbol_in_section()
  module: do not binary-search in __ksymtab_gpl if fsa->gplok is false
  module: do not pass opaque pointer for symbol search
  module: show disallowed symbol name for inherit_taint()
  module: fix [e_shstrndx].sh_size=0 OOB access
  module: Introduce module unload taint tracking
  module: Move module_assert_mutex_or_preempt() to internal.h
  module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code
  module.h: simplify MODULE_IMPORT_NS
  powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx
  module: Remove module_addr_min and module_addr_max
  module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
  module: Introduce data_layout
  module: Prepare for handling several RB trees
  module: Always have struct mod_tree_root
  module: Rename debug_align() as strict_align()
  module: Rework layout alignment to avoid BUG_ON()s
  module: Move module_enable_x() and frob_text() in strict_rwx.c
  module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX
  module: Move version support into a separate file
  ...
2022-05-26 17:13:43 -07:00
Linus Torvalds
44d35720c9 sysctl changes for v5.19-rc1
For two kernel releases now kernel/sysctl.c has been being cleaned up
 slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and
 all this caused merge conflicts with one susbystem or another.
 
 This tree was put together to help try to avoid conflicts with these cleanups
 going on different trees at time. So nothing exciting on this pull request,
 just cleanups.
 
 I actually had this sysctl-next tree up since v5.18 but I missed sending a
 pull request for it on time during the last merge window. And so these changes
 have been being soaking up on sysctl-next and so linux-next for a while.
 The last change was merged May 4th.
 
 Most of the compile issues were reported by 0day and fixed.
 
 To help avoid a conflict with bpf folks at Daniel Borkmann's request
 I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which
 moves the BPF sysctls from kernel/sysctl.c to BPF core.
 
 Possible merge conflicts and known resolutions as per linux-next:
 
 bfp:
 https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au
 
 rcu:
 https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au
 
 powerpc:
 https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmKOq8ASHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinDAkQAJVo5YVM9f74UwYp4PQhTpjxJBCjRoZD
 z1u9bp5rMj2ujTC8Fr7VmzKaHrb8+r1C1WvCvZtIzemYNB4lZUrHpVDYfXuXiPRB
 ihPmEjhlPO5PFBx6cVCpI3cu9bEhG00rLc1QXnABx/pXwNPcOTJAGZJVamZvqubk
 chjgZrb7N+adHPfvS55v1+zpwdeKfpp5U3zuu5qlT/nn0GS0HCVzOj5fj4oC4wtJ
 IqfUubo+FX50Ga58yQABWNrjaPD9Crykz5ohVazy3ElQl0hJ4VsK65ct3blqc2vz
 1Bb8kPpWuv6aZ5nr1lCVE8qvF4ZIL33ySvpg5BSdWLQEDrBbSpzvJe9Yn7wgR+eq
 y7fhpO24+zRM82EoDMEvyxX9u1n1RsvoXRtf3ds9BGf63MUxk8a1cgjlU6vuyO2U
 JhDmfM1xzdKvPoY4COOnHzcAiIqzItTqKd09N5y0cahmYstROU8lvp9huhTAHqk1
 SjQMbLIZG7OnX8ZeQcR1EB8sq/IOPZT48ejj0iJmQ8FyMaep71MOQLYyLPAq4lgh
 JHXm8P6QdB57jfJbqAeNSyZoK0qdxOUR/83Zcah7Jjns6vkju1DNatEsaEEI2y2M
 4n7/rkHeZ3TyFHBUX4e9FomKvGLsAalDBRiqsuxLSOPMU8rGrNLAslOAtKwvp90X
 4ht3M2VP098l
 =btwh
 -----END PGP SIGNATURE-----

Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull sysctl updates from Luis Chamberlain:
 "For two kernel releases now kernel/sysctl.c has been being cleaned up
  slowly, since the tables were grossly long, sprinkled with tons of
  #ifdefs and all this caused merge conflicts with one susbystem or
  another.

  This tree was put together to help try to avoid conflicts with these
  cleanups going on different trees at time. So nothing exciting on this
  pull request, just cleanups.

  Thanks a lot to the Uniontech and Huawei folks for doing some of this
  nasty work"

* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
  sched: Fix build warning without CONFIG_SYSCTL
  reboot: Fix build warning without CONFIG_SYSCTL
  kernel/kexec_core: move kexec_core sysctls into its own file
  sysctl: minor cleanup in new_dir()
  ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
  fs/proc: Introduce list_for_each_table_entry for proc sysctl
  mm: fix unused variable kernel warning when SYSCTL=n
  latencytop: move sysctl to its own file
  ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
  ftrace: Fix build warning
  ftrace: move sysctl_ftrace_enabled to ftrace.c
  kernel/do_mount_initrd: move real_root_dev sysctls to its own file
  kernel/delayacct: move delayacct sysctls to its own file
  kernel/acct: move acct sysctls to its own file
  kernel/panic: move panic sysctls to its own file
  kernel/lockdep: move lockdep sysctls to its own file
  mm: move page-writeback sysctls to their own file
  mm: move oom_kill sysctls to their own file
  kernel/reboot: move reboot sysctls to its own file
  sched: Move energy_aware sysctls to topology.c
  ...
2022-05-26 16:57:20 -07:00
Linus Torvalds
bf9095424d S390:
* ultravisor communication device driver
 
 * fix TEID on terminating storage key ops
 
 RISC-V:
 
 * Added Sv57x4 support for G-stage page table
 
 * Added range based local HFENCE functions
 
 * Added remote HFENCE functions based on VCPU requests
 
 * Added ISA extension registers in ONE_REG interface
 
 * Updated KVM RISC-V maintainers entry to cover selftests support
 
 ARM:
 
 * Add support for the ARMv8.6 WFxT extension
 
 * Guard pages for the EL2 stacks
 
 * Trap and emulate AArch32 ID registers to hide unsupported features
 
 * Ability to select and save/restore the set of hypercalls exposed
   to the guest
 
 * Support for PSCI-initiated suspend in collaboration with userspace
 
 * GICv3 register-based LPI invalidation support
 
 * Move host PMU event merging into the vcpu data structure
 
 * GICv3 ITS save/restore fixes
 
 * The usual set of small-scale cleanups and fixes
 
 x86:
 
 * New ioctls to get/set TSC frequency for a whole VM
 
 * Allow userspace to opt out of hypercall patching
 
 * Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
 
 AMD SEV improvements:
 
 * Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
 
 * V_TSC_AUX support
 
 Nested virtualization improvements for AMD:
 
 * Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
   nested vGIF)
 
 * Allow AVIC to co-exist with a nested guest running
 
 * Fixes for LBR virtualizations when a nested guest is running,
   and nested LBR virtualization support
 
 * PAUSE filtering for nested hypervisors
 
 Guest support:
 
 * Decoupling of vcpu_is_preempted from PV spinlocks
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
 zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
 rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
 PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
 2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
 C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
 =ozWx
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "S390:

   - ultravisor communication device driver

   - fix TEID on terminating storage key ops

  RISC-V:

   - Added Sv57x4 support for G-stage page table

   - Added range based local HFENCE functions

   - Added remote HFENCE functions based on VCPU requests

   - Added ISA extension registers in ONE_REG interface

   - Updated KVM RISC-V maintainers entry to cover selftests support

  ARM:

   - Add support for the ARMv8.6 WFxT extension

   - Guard pages for the EL2 stacks

   - Trap and emulate AArch32 ID registers to hide unsupported features

   - Ability to select and save/restore the set of hypercalls exposed to
     the guest

   - Support for PSCI-initiated suspend in collaboration with userspace

   - GICv3 register-based LPI invalidation support

   - Move host PMU event merging into the vcpu data structure

   - GICv3 ITS save/restore fixes

   - The usual set of small-scale cleanups and fixes

  x86:

   - New ioctls to get/set TSC frequency for a whole VM

   - Allow userspace to opt out of hypercall patching

   - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

  AMD SEV improvements:

   - Add KVM_EXIT_SHUTDOWN metadata for SEV-ES

   - V_TSC_AUX support

  Nested virtualization improvements for AMD:

   - Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
     nested vGIF)

   - Allow AVIC to co-exist with a nested guest running

   - Fixes for LBR virtualizations when a nested guest is running, and
     nested LBR virtualization support

   - PAUSE filtering for nested hypervisors

  Guest support:

   - Decoupling of vcpu_is_preempted from PV spinlocks"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
  KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
  KVM: selftests: x86: Sync the new name of the test case to .gitignore
  Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
  x86, kvm: use correct GFP flags for preemption disabled
  KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
  x86/kvm: Alloc dummy async #PF token outside of raw spinlock
  KVM: x86: avoid calling x86 emulator without a decoded instruction
  KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
  x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
  s390/uv_uapi: depend on CONFIG_S390
  KVM: selftests: x86: Fix test failure on arch lbr capable platforms
  KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
  KVM: s390: selftest: Test suppression indication on key prot exception
  KVM: s390: Don't indicate suppression on dirtying, failing memop
  selftests: drivers/s390x: Add uvdevice tests
  drivers/s390/char: Add Ultravisor io device
  MAINTAINERS: Update KVM RISC-V entry to cover selftests support
  RISC-V: KVM: Introduce ISA extension register
  RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
  RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
  ...
2022-05-26 14:20:14 -07:00
Linus Torvalds
98931dd95f Yang Shi has improved the behaviour of khugepaged collapsing of readonly
file-backed transparent hugepages.
 
 Johannes Weiner has arranged for zswap memory use to be tracked and
 managed on a per-cgroup basis.
 
 Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
 enablement of the recent huge page vmemmap optimization feature.
 
 Baolin Wang contributes a series to fix some issues around hugetlb
 pagetable invalidation.
 
 Zhenwei Pi has fixed some interactions between hwpoisoned pages and
 virtualization.
 
 Tong Tiangen has enabled the use of the presently x86-only
 page_table_check debugging feature on arm64 and riscv.
 
 David Vernet has done some fixup work on the memcg selftests.
 
 Peter Xu has taught userfaultfd to handle write protection faults against
 shmem- and hugetlbfs-backed files.
 
 More DAMON development from SeongJae Park - adding online tuning of the
 feature and support for monitoring of fixed virtual address ranges.  Also
 easier discovery of which monitoring operations are available.
 
 Nadav Amit has done some optimization of TLB flushing during mprotect().
 
 Neil Brown continues to labor away at improving our swap-over-NFS support.
 
 David Hildenbrand has some fixes to anon page COWing versus
 get_user_pages().
 
 Peng Liu fixed some errors in the core hugetlb code.
 
 Joao Martins has reduced the amount of memory consumed by device-dax's
 compound devmaps.
 
 Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
 
 Muchun Song has found and fixed some errors in the TLB flushing of
 transparent hugepages.
 
 Roman Gushchin has done more work on the memcg selftests.
 
 And, of course, many smaller fixes and cleanups.  Notably, the customary
 million cleanup serieses from Miaohe Lin.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
 jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
 PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
 =nFe6
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:
 "Almost all of MM here. A few things are still getting finished off,
  reviewed, etc.

   - Yang Shi has improved the behaviour of khugepaged collapsing of
     readonly file-backed transparent hugepages.

   - Johannes Weiner has arranged for zswap memory use to be tracked and
     managed on a per-cgroup basis.

   - Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
     runtime enablement of the recent huge page vmemmap optimization
     feature.

   - Baolin Wang contributes a series to fix some issues around hugetlb
     pagetable invalidation.

   - Zhenwei Pi has fixed some interactions between hwpoisoned pages and
     virtualization.

   - Tong Tiangen has enabled the use of the presently x86-only
     page_table_check debugging feature on arm64 and riscv.

   - David Vernet has done some fixup work on the memcg selftests.

   - Peter Xu has taught userfaultfd to handle write protection faults
     against shmem- and hugetlbfs-backed files.

   - More DAMON development from SeongJae Park - adding online tuning of
     the feature and support for monitoring of fixed virtual address
     ranges. Also easier discovery of which monitoring operations are
     available.

   - Nadav Amit has done some optimization of TLB flushing during
     mprotect().

   - Neil Brown continues to labor away at improving our swap-over-NFS
     support.

   - David Hildenbrand has some fixes to anon page COWing versus
     get_user_pages().

   - Peng Liu fixed some errors in the core hugetlb code.

   - Joao Martins has reduced the amount of memory consumed by
     device-dax's compound devmaps.

   - Some cleanups of the arch-specific pagemap code from Anshuman
     Khandual.

   - Muchun Song has found and fixed some errors in the TLB flushing of
     transparent hugepages.

   - Roman Gushchin has done more work on the memcg selftests.

  ... and, of course, many smaller fixes and cleanups. Notably, the
  customary million cleanup serieses from Miaohe Lin"

* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
  mm: kfence: use PAGE_ALIGNED helper
  selftests: vm: add the "settings" file with timeout variable
  selftests: vm: add "test_hmm.sh" to TEST_FILES
  selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
  selftests: vm: add migration to the .gitignore
  selftests/vm/pkeys: fix typo in comment
  ksm: fix typo in comment
  selftests: vm: add process_mrelease tests
  Revert "mm/vmscan: never demote for memcg reclaim"
  mm/kfence: print disabling or re-enabling message
  include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
  include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
  mm: fix a potential infinite loop in start_isolate_page_range()
  MAINTAINERS: add Muchun as co-maintainer for HugeTLB
  zram: fix Kconfig dependency warning
  mm/shmem: fix shmem folio swapoff hang
  cgroup: fix an error handling path in alloc_pagecache_max_30M()
  mm: damon: use HPAGE_PMD_SIZE
  tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
  nodemask.h: fix compilation error with GCC12
  ...
2022-05-26 12:32:41 -07:00
Linus Torvalds
df202b452f Kbuild updates for v5.19
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
 
  - Support W=e as a shorthand for KCFLAGS=-Werror
 
  - Fix CONFIG_IKHEADERS build to support toybox cpio
 
  - Add scripts/dummy-tools/pahole to ease distro packagers' life
 
  - Suppress false-positive warnings from checksyscalls.sh for W=2 build
 
  - Factor out the common code of arch/*/boot/install.sh into
    scripts/install.sh
 
  - Support 'kernel-install' tool in scripts/prune-kernel
 
  - Refactor module-versioning to link the symbol versions at the final
    link of vmlinux and modules
 
  - Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
    an arch-agnostic way
 
  - Refactor modpost, Makefiles
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmKOO2oVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGG54P/3/U5FIP5EoPAVu9HqSUKeeUiBYc
 z1B8d7Wt1xU0xHImPWNjoacfye4MrDMUv8mEWKgHCVusJxbUoS+3Z/kd64NU75Fg
 Cpj+9fP1N8m02IJzraxn6fw0bmfx4zp9Zsa9l2fjwL0emq4qhB7BA9/Nl6Png1IW
 p0TPR6gV0Wgp6ikf/eJ3b1decFSqM7QzDlbo860nPMG164gNpDZmFVf2G4HCRQoY
 GtgoQLEy2pBeOdU7+nJTKl2f5JOhDjRKX8equ7BHW9l7nbUvHd6ys3DGqYO3nvwV
 hZZdHwDtxxO6bJtzClKPREyfL2H9R2AGxq94HzSwdvwdLLoFxrTN+mg88xBg17Rm
 tKHy8jpZT36qh218h5lX5n9ZWcovTA38giZ+S/tkwOvvYGivKHDS23QwzB0HrG8/
 VRd+0rhfIvuIpu0OQaTpTkZr2QVci2Zn6PPnxpyPEsGvWVFRjyx0WyZh4fFXnkQT
 n+GS7j5g1LVMra0qu0y+yp4zy/DVFKIcfry0xU8S5SaSEBBcWUxLS2nnoBVB4vb2
 RpiVD2vaOlvu/Zs2SOgtuMOnTw+Qqrvh7OYm/WyxWrB3JQGa/r+vipMKiFEDi2NN
 pwR8wJT/CW1ycte93m3oO83jiitFqzXtAqo24wKlp4SOqnR/TQ/dx743ku2xvONe
 uynJVW/gZVm4KEUl
 =Y2TB
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Add HOSTPKG_CONFIG env variable to allow users to override pkg-config

 - Support W=e as a shorthand for KCFLAGS=-Werror

 - Fix CONFIG_IKHEADERS build to support toybox cpio

 - Add scripts/dummy-tools/pahole to ease distro packagers' life

 - Suppress false-positive warnings from checksyscalls.sh for W=2 build

 - Factor out the common code of arch/*/boot/install.sh into
   scripts/install.sh

 - Support 'kernel-install' tool in scripts/prune-kernel

 - Refactor module-versioning to link the symbol versions at the final
   link of vmlinux and modules

 - Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
   an arch-agnostic way

 - Refactor modpost, Makefiles

* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
  genksyms: adjust the output format to modpost
  kbuild: stop merging *.symversions
  kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
  modpost: extract symbol versions from *.cmd files
  modpost: add sym_find_with_module() helper
  modpost: change the license of EXPORT_SYMBOL to bool type
  modpost: remove left-over cross_compile declaration
  kbuild: record symbol versions in *.cmd files
  kbuild: generate a list of objects in vmlinux
  modpost: move *.mod.c generation to write_mod_c_files()
  modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
  scripts/prune-kernel: Use kernel-install if available
  kbuild: factor out the common installation code into scripts/install.sh
  modpost: split new_symbol() to symbol allocation and hash table addition
  modpost: make sym_add_exported() always allocate a new symbol
  modpost: make multiple export error
  modpost: dump Module.symvers in the same order of modules.order
  modpost: traverse the namespace_list in order
  modpost: use doubly linked list for dump_lists
  modpost: traverse unresolved symbols in order
  ...
2022-05-26 12:09:50 -07:00
Linus Torvalds
16477cdfef asm-generic changes for 5.19
The asm-generic tree contains three separate changes for linux-5.19:
 
 - The h8300 architecture is retired after it has been effectively
   unmaintained for a number of years. This is the last architecture we
   supported that has no MMU implementation, but there are still a few
   architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
   and without an MMU.
 
 - A series to add a generic ticket spinlock that can be shared by most
   architectures with a working cmpxchg or ll/sc type atomic, including
   the conversion of riscv, csky and openrisc. This series is also a
   prerequisite for the loongarch64 architecture port that will come as
   a separate pull request.
 
 - A cleanup of some exported uapi header files to ensure they can be
   included from user space without relying on other kernel headers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKPlXoACgkQmmx57+YA
 GNkxrRAAnuSgOUo9JC5C4Gm2Q9yhEUHU1QIYeVO0jlan5CkF18bo1Loptq4MdQtO
 /0pXJPH8rFhDSJQLetO4AAjEMDfJGR5ibmf7SasO03HjqC9++fIeN047MbnkHAwY
 hFqIkgqn4l+g1RMWK5WUSDJ3XQ7p5/yWzpg/CuxJ+D0w9by/LWI5A+2NKGXOS3GF
 yi7cWvIKC1l+PmrH3BFA+JYVTvFzlr9P6x5pSEBi6HmjGQR+Xn3s0bnIf6DGRZ+B
 Q6v03kMxtcqI9e9C0r0r7ZGbdMuRTYbGrksa4EfK0yJM9P0HchhTtT9zawAK7Ddv
 VMM4B+9r60UEM++hOLS6XrLJdn+Fv+OJDnhONb5c+Mndd8cwV1JbOlVbUlGkn92e
 WSdUCW6m0TBzDs9Ae1++1kUl1LodlcmSzxlb0ueAhU01QacCPlneyIEKUhcrCl5w
 ITVw4YVa/BVCh+HvTEdhhak/Qb/nWiojMY+UIH5smiwj6FSFdwEmmgCgHAKprQaA
 STMxRnccFknGW9CZheoMATYsPIHQKPlm9lbiulSoMLDHxGwshU/6vKD4HDoZU51d
 HPmUZeKVPahXCUXB4iFI3qD4Ltxaru9VbgfUiY18VB2oc6Mk+0oeh6luqwsrgBdz
 P2sQ2riZKhN5Frm3DCh7IbJqoqKHlLMWh0itpNllgP5SDmDJjng=
 =ri2Q
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree contains three separate changes for linux-5.19:

   - The h8300 architecture is retired after it has been effectively
     unmaintained for a number of years. This is the last architecture
     we supported that has no MMU implementation, but there are still a
     few architectures (arm, m68k, riscv, sh and xtensa) that support
     CPUs with and without an MMU.

   - A series to add a generic ticket spinlock that can be shared by
     most architectures with a working cmpxchg or ll/sc type atomic,
     including the conversion of riscv, csky and openrisc. This series
     is also a prerequisite for the loongarch64 architecture port that
     will come as a separate pull request.

   - A cleanup of some exported uapi header files to ensure they can be
     included from user space without relying on other kernel headers"

* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  h8300: remove stale bindings and symlink
  sparc: add asm/stat.h to UAPI compile-test coverage
  powerpc: add asm/stat.h to UAPI compile-test coverage
  mips: add asm/stat.h to UAPI compile-test coverage
  riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
  kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
  agpgart.h: do not include <stdlib.h> from exported header
  csky: Move to generic ticket-spinlock
  RISC-V: Move to queued RW locks
  RISC-V: Move to generic spinlocks
  openrisc: Move to ticket-spinlock
  asm-generic: qrwlock: Document the spinlock fairness requirements
  asm-generic: qspinlock: Indicate the use of mixed-size atomics
  asm-generic: ticket-lock: New generic ticket-based spinlock
  remove the h8300 architecture
2022-05-26 10:50:30 -07:00
Linus Torvalds
2e17ce1106 slab changes for 5.19
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmKLUYoACgkQ4CHKc/GJ
 qRCMFwf/Tm1cf2JLUANrT58rjkrrj15EtKhnJdm5/yvmsWKps7WKPP4jeUHe+NTO
 NovAGt67lG1l6LMLczZkWckOkWlyYjC42CPDLdxRUkk+zQRb3nRA8Nbt6VTNBOfQ
 0wTLOqXgsNXdSPSVUsKGL8kIAHNQTMX+7TjO6s7CXy/5Qag6r1iZX2HZxASOHxLa
 yYzaJ9pJRZBAMGnzV6L6v0J8KPnjYO0fB68S1qYQTbhoRxchtFF+0AIr1JydGgBI
 9RFUowTrSpJkZtcSjabopvZz4JfCRDP+eAxkyw13feji7MG1FMX74HgDdw+HhzTv
 R2/6iA5WcsmzcXopsfMx8lUP/KIfPw==
 =gnSc
 -----END PGP SIGNATURE-----

Merge tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab

Pull slab updates from Vlastimil Babka:

 - Conversion of slub_debug stack traces to stackdepot, allowing more
   useful debugfs-based inspection for e.g. memory leak debugging.
   Allocation and free debugfs info now includes full traces and is
   sorted by the unique trace frequency.

   The stackdepot conversion was already attempted last year but
   reverted by ae14c63a9f. The memory overhead (while not actually
   enabled on boot) has been meanwhile solved by making the large
   stackdepot allocation dynamic. The xfstest issues haven't been
   reproduced on current kernel locally nor in -next, so the slab cache
   layout changes that originally made that bug manifest were probably
   not the root cause.

 - Refactoring of dma-kmalloc caches creation.

 - Trivial cleanups such as removal of unused parameters, fixes and
   clarifications of comments.

 - Hyeonggon Yoo joins as a reviewer.

* tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  MAINTAINERS: add myself as reviewer for slab
  mm/slub: remove unused kmem_cache_order_objects max
  mm: slab: fix comment for __assume_kmalloc_alignment
  mm: slab: fix comment for ARCH_KMALLOC_MINALIGN
  mm/slub: remove unneeded return value of slab_pad_check
  mm/slab_common: move dma-kmalloc caches creation into new_kmalloc_cache()
  mm/slub: remove meaningless node check in ___slab_alloc()
  mm/slub: remove duplicate flag in allocate_slab()
  mm/slub: remove unused parameter in setup_object*()
  mm/slab.c: fix comments
  slab, documentation: add description of debugfs files for SLUB caches
  mm/slub: sort debugfs output by frequency of stack traces
  mm/slub: distinguish and print stack traces in debugfs files
  mm/slub: use stackdepot to save stack trace in objects
  mm/slub: move struct track init out of set_track()
  lib/stackdepot: allow requesting early initialization dynamically
  mm/slub, kunit: Make slub_kunit unaffected by user specified flags
  mm/slab: remove some unused functions
2022-05-25 10:24:04 -07:00
Masahiro Yamada
7b4537199a kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
include/{linux,asm-generic}/export.h defines a weak symbol, __crc_*
as a placeholder.

Genksyms writes the version CRCs into the linker script, which will be
used for filling the __crc_* symbols. The linker script format depends
on CONFIG_MODULE_REL_CRCS. If it is enabled, __crc_* holds the offset
to the reference of CRC.

It is time to get rid of this complexity.

Now that modpost parses text files (.*.cmd) to collect all the CRCs,
it can generate C code that will be linked to the vmlinux or modules.

Generate a new C file, .vmlinux.export.c, which contains the CRCs of
symbols exported by vmlinux. It is compiled and linked to vmlinux in
scripts/link-vmlinux.sh.

Put the CRCs of symbols exported by modules into the existing *.mod.c
files. No additional build step is needed for modules. As before,
*.mod.c are compiled and linked to *.ko in scripts/Makefile.modfinal.

No linker magic is used here. The new C implementation works in the
same way, whether CONFIG_RELOCATABLE is enabled or not.
CONFIG_MODULE_REL_CRCS is no longer needed.

Previously, Kbuild invoked additional $(LD) to update the CRCs in
objects, but this step is unneeded too.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
2022-05-24 16:33:20 +09:00
Johannes Weiner
7b42f1041c mm: Kconfig: move swap and slab config options to the MM section
These are currently under General Setup. MM seems like a better fit.

Link: https://lkml.kernel.org/r/20220510152847.230957-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 14:08:53 -07:00
Jason A. Donenfeld
2f14062bb1 random: handle latent entropy and command line from random_init()
Currently, start_kernel() adds latent entropy and the command line to
the entropy bool *after* the RNG has been initialized, deferring when
it's actually used by things like stack canaries until the next time
the pool is seeded. This surely is not intended.

Rather than splitting up which entropy gets added where and when between
start_kernel() and random_init(), just do everything in random_init(),
which should eliminate these kinds of bugs in the future.

While we're at it, rename the awkwardly titled "rand_initialize()" to
the more standard "random_init()" nomenclature.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-05-18 15:53:53 +02:00
Jason A. Donenfeld
fe222a6ca2 init: call time_init() before rand_initialize()
Currently time_init() is called after rand_initialize(), but
rand_initialize() makes use of the timer on various platforms, and
sometimes this timer needs to be initialized by time_init() first. In
order for random_get_entropy() to not return zero during early boot when
it's potentially used as an entropy source, reverse the order of these
two calls. The block doing random initialization was right before
time_init() before, so changing the order shouldn't have any complicated
effects.

Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-05-13 23:59:22 +02:00
Peter Xu
430529b5c6 mm/uffd: move USERFAULTFD configs into mm/
We used to have USERFAULTFD configs stored in init/.  It makes sense as a
start because that's the default place for storing syscall related
configs.

However userfaultfd evolved a bit in the past few years and some more
config options were added.  They're no longer related to syscalls and
start to be not suitable to be kept in the init/ directory anymore,
because they're pure mm concepts.

But it's not ideal either to keep the userfaultfd configs separate from
each other.  Hence this patch moves the userfaultfd configs under init/ to
be under mm/ so that we'll start to group all userfaultfd configs
together.

We do have quite a few examples of syscall related configs that are not
put under init/Kconfig: FTRACE_SYSCALLS, SWAP, FILE_LOCKING,
MEMFD_CREATE..  They all reside in the dir where they're more suitable for
the concept.  So it seems there's no restriction to keep the role of
having syscall related CONFIG_* under init/ only.

Link: https://lkml.kernel.org/r/20220420144823.35277-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 07:20:12 -07:00
Aaron Tomlin
99bd995655 module: Introduce module unload taint tracking
Currently, only the initial module that tainted the kernel is
recorded e.g. when an out-of-tree module is loaded.

The purpose of this patch is to allow the kernel to maintain a record of
each unloaded module that taints the kernel. So, in addition to
displaying a list of linked modules (see print_modules()) e.g. in the
event of a detected bad page, unloaded modules that carried a taint/or
taints are displayed too. A tainted module unload count is maintained.

The number of tracked modules is not fixed. This feature is disabled by
default.

Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-12 10:29:41 -07:00
David Disseldorp
800c24dc34 initramfs: support cpio extraction with file checksums
Add support for extraction of checksum-enabled "070702" cpio archives,
specified in Documentation/driver-api/early-userspace/buffer-format.rst. 
Fail extraction if the calculated file data checksum doesn't match the
value carried in the header.

Link: https://lkml.kernel.org/r/20220404093429.27570-7-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Martin Wilck <mwilck@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:29:20 -07:00
David Disseldorp
1274aea127 initramfs: add INITRAMFS_PRESERVE_MTIME Kconfig option
initramfs cpio mtime preservation, as implemented in commit 889d51a107
("initramfs: add option to preserve mtime from initramfs cpio images"),
uses a linked list to defer directory mtime processing until after all
other items in the cpio archive have been processed.  This is done to
ensure that parent directory mtimes aren't overwritten via subsequent
child creation.

The lkml link below indicates that the mtime retention use case was for
embedded devices with applications running exclusively out of initramfs,
where the 32-bit mtime value provided a rough file version identifier. 
Linux distributions which discard an extracted initramfs immediately after
the root filesystem has been mounted may want to avoid the unnecessary
overhead.

This change adds a new INITRAMFS_PRESERVE_MTIME Kconfig option, which can
be used to disable on-by-default mtime retention and in turn speed up
initramfs extraction, particularly for cpio archives with large directory
counts.

Benchmarks with a one million directory cpio archive extracted 20 times
demonstrated:
				mean extraction time (s)	std dev
INITRAMFS_PRESERVE_MTIME=y		3.808			 0.006
INITRAMFS_PRESERVE_MTIME unset		3.056			 0.004

The above extraction times were measured using ftrace (initcall_finish -
initcall_start) values for populate_rootfs() with initramfs_async
disabled.

[ddiss@suse.de: rebase atop dir_entry.name flexible array member and drop separate initramfs_mtime.h header]
Link: https://lkml.org/lkml/2008/9/3/424
Link: https://lkml.kernel.org/r/20220404093429.27570-4-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:29:19 -07:00
David Disseldorp
fcb7aedd2e initramfs: make dir_entry.name a flexible array member
dir_entry.name is currently allocated via a separate kstrdup().  Change it
to a flexible array member and allocate it along with struct dir_entry.

Link: https://lkml.kernel.org/r/20220404093429.27570-3-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:29:19 -07:00
David Disseldorp
da028e4c4b initramfs: refactor do_header() cpio magic checks
Patch series "initramfs: "crc" cpio format and INITRAMFS_PRESERVE_MTIME", v7.

This patchset does some minor initramfs refactoring and allows cpio entry
mtime preservation to be disabled via a new Kconfig
INITRAMFS_PRESERVE_MTIME option.

Patches 4/6 to 6/6 implement support for creation and extraction of "crc"
cpio archives, which carry file data checksums.  Basic tests for this
functionality can be found at https://github.com/rapido-linux/rapido/pull/163


This patch (of 6):

do_header() is called for each cpio entry and fails if the first six bytes
don't match "newc" magic.  The magic check includes a special case error
message if POSIX.1 ASCII (cpio -H odc) magic is detected.  This special
case POSIX.1 check can be nested under the "newc" mismatch code path to
avoid calling memcmp() twice in a non-error case.

Link: https://lkml.kernel.org/r/20220404093429.27570-1-ddiss@suse.de
Link: https://lkml.kernel.org/r/20220404093429.27570-2-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:29:19 -07:00
Eric W. Biederman
68d85f0a33 init: Deal with the init process being a user mode process
It is silly for user_mode_thread to leave PF_KTHREAD set
on the resulting task.  Update the init process so that
it does not care if PF_KTHREAD is set or not.

Ensure do_populate_rootfs flushes all delayed fput work by calling
task_work_run.  In the rare instance that async_schedule_domain calls
do_populate_rootfs synchronously it is possible do_populate_rootfs
will be called directly from the init process.  At which point fput
will call "task_work_add(current, ..., TWA_RESUME)".  The files on the
initramfs need to be completely put before we attempt to exec them
(which is before the code enters userspace).  So call task_work_run
just in case there are any pending fput operations.

Link: https://lkml.kernel.org/r/20220506141512.516114-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-07 09:01:59 -05:00
Eric W. Biederman
343f4c49f2 kthread: Don't allocate kthread_struct for init and umh
If kthread_is_per_cpu runs concurrently with free_kthread_struct the
kthread_struct that was just freed may be read from.

This bug was introduced by commit 40966e316f ("kthread: Ensure
struct kthread is present for all kthreads").  When kthread_struct
started to be allocated for all tasks that have PF_KTHREAD set.  This
in turn required the kthread_struct to be freed in kernel_execve and
violated the assumption that kthread_struct will have the same
lifetime as the task.

Looking a bit deeper this only applies to callers of kernel_execve
which is just the init process and the user mode helper processes.
These processes really don't want to be kernel threads but are for
historical reasons.  Mostly that copy_thread does not know how to take
a kernel mode function to the process with for processes without
PF_KTHREAD or PF_IO_WORKER set.

Solve this by not allocating kthread_struct for the init process and
the user mode helper processes.

This is done by adding a kthread member to struct kernel_clone_args.
Setting kthread in fork_idle and kernel_thread.  Adding
user_mode_thread that works like kernel_thread except it does not set
kthread.  In fork only allocating the kthread_struct if .kthread is set.

I have looked at kernel/kthread.c and since commit 40966e316f
("kthread: Ensure struct kthread is present for all kthreads") there
have been no assumptions added that to_kthread or __to_kthread will
not return NULL.

There are a few callers of to_kthread or __to_kthread that assume a
non-NULL struct kthread pointer will be returned.  These functions are
kthread_data(), kthread_parmme(), kthread_exit(), kthread(),
kthread_park(), kthread_unpark(), kthread_stop().  All of those functions
can reasonably expected to be called when it is know that a task is a
kthread so that assumption seems reasonable.

Cc: stable@vger.kernel.org
Fixes: 40966e316f ("kthread: Ensure struct kthread is present for all kthreads")
Reported-by: Максим Кутявин <maximkabox13@gmail.com>
Link: https://lkml.kernel.org/r/20220506141512.516114-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-06 14:49:44 -05:00
Kees Cook
7374fa33dc init/Kconfig: remove USELIB syscall by default
The uselib syscall has been long deprecated.  There's no need to keep this
enabled by default under X86_32.

Link: https://lkml.kernel.org/r/20220412212519.4113845-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 14:38:01 -07:00