no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
First the media device node was created, and if successful it was
marked as 'registered'. This leaves a small race condition where
an application can open the device node and get an error back
because the 'registered' flag was not yet set.
Change the order: first set the 'registered' flag, then actually
register the media device node. If that fails, then clear the flag.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: cf4b9211b5 ("[media] media: Media device node support")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The graph walk tries to follow all links, even if they are not between
pads. This causes a crash with, e.g. a MEDIA_LNK_FL_ANCILLARY_LINK link.
Fix this by allowing the walk to proceed only for MEDIA_LNK_FL_DATA_LINK
links.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # for 6.1 and later
Fixes: ae21987283 ("media: mc: entity: Rewrite media_pipeline_start()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The MEDIA_PAD_FL_MUST_CONNECT flag indicates that the pad requires an
enabled link to stream, but only if it has any link at all. This makes
little sense, as if a pad is part of a pipeline, there are very few use
cases for an active link to be mandatory only if links exist at all. A
review of in-tree drivers confirms they all need an enabled link for
pads marked with the MEDIA_PAD_FL_MUST_CONNECT flag.
Expand the scope of the flag by rejecting pads that have no links at
all. This requires modifying the pipeline build code to add those pads
to the pipeline.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The pad local variable in the media_pipeline_explore_next_link()
function is used to store the pad through which the entity has been
reached. Rename it to origin to reflect that and make the code easier to
read. This will be even more important in subsequent commits when
expanding the function with additional logic.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Maintain a counter of the links connected to a pad in the media_pad
structure. This helps checking if a pad is connected to anything, which
will be used in the pipeline building code.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The media_create_pad_link() function doesn't correctly clear reject link
type flags, nor does it set the DATA_LINK flag. It only works because
the MEDIA_LNK_FL_DATA_LINK flag's value is 0.
Fix it by returning an error if any link type flag is set. This doesn't
introduce any regression, as nobody calls the media_create_pad_link()
function with link type flags (easily checked by grepping for the flag
in the source code, there are very few hits).
Set the MEDIA_LNK_FL_DATA_LINK explicitly, which is a no-op that the
compiler will optimize out, but is still useful to make the code more
explicit and easier to understand.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When building pipelines by following links, the
media_pipeline_explore_next_link() function only traverses enabled
links. The remote pad of a disabled link is not added to the pipeline,
and neither is the local pad. While the former is correct as disabled
links should not be followed, not adding the local pad breaks processing
of the MEDIA_PAD_FL_MUST_CONNECT flag.
The MEDIA_PAD_FL_MUST_CONNECT flag is checked in the
__media_pipeline_start() function that iterates over all pads after
populating the pipeline. If the pad is not present, the check gets
skipped, rendering it useless.
Fix this by adding the local pad of all links regardless of their state,
only skipping the remote pad for disabled links.
Cc: stable@vger.kernel.org # 6.1
Fixes: ae21987283 ("media: mc: entity: Rewrite media_pipeline_start()")
Reported-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Closes: https://lore.kernel.org/linux-media/7658a15a-80c5-219f-2477-2a94ba6c6ba1@kontron.de
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Now that the driver core can properly handle constant struct bus_type,
move the media_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Drop a debug print in media_release(), which is a release callback for a
file handle. Printing a debug message here is simply not necessary.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This config option was added during the development of the Request API
to make it easy to disable it.
The Request API is now stable so it is time to drop this option altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Check the validity of pad flags on entity init. Exactly one of the flags
must be set.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the pad flag specifying the pad type instead of a boolean in
preparation for internal source pads.
Also make the loop variable unsigned.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
fwnode_graph_parse_endpoint() fwnode argument is now const, therefore make
media_entity_get_fwnode_pad() fwnode argument const as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In the file mc-device.c, the function
media_device_register_entity_notify() does not need to have the
__must_check attribute since it returns only a value of 0.
Therefore, we can remove this attribute and change the function's
return type.
Signed-off-by: Jason Kim <sukbeom.kim@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit ae21987283 ("media: mc: entity: Rewrite
media_pipeline_start()") incorrectly referred to entity instead of pad
in a comment, and forgot to update a second comment accordingly when
moving the pipe from entity to pad. Furthermore, it didn't properly
reflow the documentation text it updated.
Fix those small issues.
Fixes: ae21987283 ("media: mc: entity: Rewrite media_pipeline_start()")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Various functions access the media_device from a pad by going through
the entity the pad belongs to. Remove the level of indirection and get
the media_device from the pad directly.
Fixes: 9e3576a1ae ("media: mc: convert pipeline funcs to take media_pad")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a media_pipeline_for_each_entity() macro to iterate over entities in
a pipeline. This should be used by driver as a replacement of the
media_graph_walk API, as iterating over the media_pipeline uses the
cached list of pads and is thus more efficient.
Deprecate the media_graph_walk API to indicate it shouldn't be used in
new drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a media_pipeline_for_each_pad() macro to iterate over pads in a
pipeline. This should be used by driver as a replacement of the
media_graph_walk API, as iterating over the media_pipeline uses the
cached list of pads and is thus more efficient.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There is no media_graph_walk_free(). media_graph_walk_cleanup() is used
to release the resources.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document the function parameters, the requirements on the pad0 and pad1
arguments, the locking requirements and the return value. Also improve
the documentation of the corresponding .has_pad_interdep() operation,
stating clearly that the operation must be called through the
media_entity_has_pad_interdep() function only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now that the pipeline is stored into pads instead of entities, we can
change the relevant functions to take pads instead of entities.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a new media entity operation, has_pad_interdep. The optional op is
used to discover the pad interdependencies inside an entity during the
pipeline construction.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
[Note: the code is mostly from Laurent but the patch description is from Tomi]
The media_pipeline_start() and media_pipeline_stop() functions use the
media graph walk API to traverse the graph and validate the pipeline.
The graph walk traverses the media graph following links between the
entities.
Also, while the pipeline can't change between the start and stop calls,
the graph is walked again from scratch at stop time, or any time a
driver needs to inspect the pipeline.
With the upcoming multiplexed streams support we will need a bit more
intelligent pipeline construction, as e.g. two independent streams may
be passing through a single entity via separate pads in which case
those pads should not be part of the same pipeline.
This patch essentially rewrites the media_pipeline_start/stop so that
a pipeline is defined as a set of pads instead of entities and the media
graph traversal considers the pad interdependencies when choosing which
links to follow.
Currently all the entity's pads are considered as interdependent. This
means that the behavior with all the current drivers stays the same, but
in the future we can define a more fine-grained pipeline construction.
Additionally the media pipeline's pads are cached at
media_pipeline_start() time, and re-used at media_pipeline_stop() which
avoid the need to re-walk the whole graph as the previous implementation
did.
Also, caching pads in the pipeline can serve in the future as the
foundation to provide a better API than the media graph walk to drivers
to iterate over pads and entities in the pipeline.
Note that the old media_pipeline_start/stop used the media graph walk
API. The new version does not use the media graph walk API, but instead
a new implementation.
There are two reasons for not changing the graph walk: it proved to be
rather difficult to change the graph walk to have the features
implemented in this patch, and second, this keeps the backward
compatibility of the graph walk as there are users of the graph walk API
The long term plan is that all the existing code would be converted to
use the new cached pipeline, thus allowing us to remove the graph walk.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add new variant of media_pipeline_start(), media_pipeline_alloc_start().
media_pipeline_alloc_start() can be used by drivers that do not need to
extend the media_pipeline. The function will either use the pipeline
already associated with the entity, if such exists, or allocate a new
pipeline.
When media_pipeline_stop() is called and the pipeline's use count drops
to zero, the pipeline is automatically freed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace direct access to the pipe field in drivers with a new helper
function. This will allow easier refactoring of media pipeline handling
in the MC core behind the scenes without affecting drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_get_fwnode_pad() function is unrelated to the graph
traversal code that it is currently bundled with. Move it with the
media_entity_remote_pad() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_enum_init() function is a wrapper around
__media_entity_enum_init() that turns a media_device pointer argument
into the maximum entity ID in the corresponding media graph.
__media_entity_enum_init() is never used outside of
media_entity_enum_init(), so the two functions can be merged together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add an iterator helper to easily cycle through all pads in an entity and
use it in media-entity and media-device code where appropriate.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
'streaming_count' is a bit misleading name, as the count is increased
with media_pipeline_start(). Let's rename it to 'start_count' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The newly added media_entity_remote_source_pad_unique() helper function
handles use cases where the entity has a link enabled uniqueness
constraint covering all pads. There are use cases where the constraint
covers a specific pad only. Add a new media_pad_remote_pad_unique()
function to handle this. It operates as
media_entity_remote_source_pad_unique(), but on a given pad instead of
on the entity.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_remote_pad_first() helper function returns the first
remote pad it finds connected to a given pad. Beside being possibly
non-deterministic (as it stops at the first enabled link), the fact that
it returns the first match makes it unsuitable for drivers that need to
guarantee that a single link is enabled, for instance when an entity can
process data from one of multiple sources at a time.
For those use cases, add a new helper function,
media_entity_remote_pad_unique(), that operates on an entity and returns
a remote pad, with a guarantee that only one link is enabled. To ease
its use in drivers, also add an inline wrapper that locates source pads
specifically. A wrapper that locates sink pads can easily be added when
needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_remote_pad() is misnamed, as it operates on a pad and
not an entity. Rename it to media_pad_remote_pad_first() to clarify its
behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Where iteration over links for an entity is clearly assuming that
all of those links are data links, use the new iterator to guarantee
that assumption is met.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Iterating over the links for an entity is a somewhat common need
through the media subsystem, but generally the assumption is that
they will all be data links. To meet that assumption add a new macro
that iterates through an entity's links and skips non-data links.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media_gobj_destroy has already set graph_obj.mdev to NULL. There is no
need to set it again.
[Sakari Ailus: Remove extra newline, rewrap commit msg]
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set bus_info field based on struct device in media_device_init() and
remove corresponding code from drivers.
Also update media_device_init() documentation: the dev field must be now
initialised before calling it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove redundant kerneldoc documentation in mc-device.c. The functions are
already documented in media-device.h, where non-redundant documentation is
also moved.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add functions to create ancillary links, so that they don't need to
be manually created by users.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now we have three types of media link, printing the right name during
debug output is slightly more complicated. Add a helper function to
make it easier.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When iterating over the media graph, don't follow links that are not
data links.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The original implementation removes reverse links for any input link and
assumes the presense of sink/source.
It fails when the link is a not a data link.
media_entity_remove_links when there's an ancillary link can also fail.
We only need to remove reverse links for a data link.
Signed-off-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_pipeline_start() function has two purposes: it constructs a
pipeline by recording the entities that are part of it, gathered from a
graph walk, and validate the media links. The pipeline pointer is stored
in the media_entity structure as part of this process, and the entity's
stream count is increased, to record that the entity is streaming.
When multiple video nodes are present in a pipeline,
media_pipeline_start() is typically called on all of them, with the same
pipeline pointer. This is taken into account in media_pipeline_start()
by skipping validation for entities that are already part of the
pipeline, while returning an error if an entity is part of a different
pipeline.
It turns out that this process is overly complicated. When
media_pipeline_start() is called for the first time, it constructs the
full pipeline, adding all entities and validating all the links.
Subsequent calls to media_pipeline_start() are then nearly no-ops, they
only increase the stream count on the pipeline and on all entities.
The media_entity stream_count field is used for two purposes: checking
if the entity is streaming, and detecting when a call to
media_pipeline_stop() balances needs to reset the entity pipe pointer to
NULL. The former can easily be replaced by a check of the pipe pointer.
Simplify media_pipeline_start() by avoiding the pipeline walk on all
calls but the first one, and drop the media_entity stream_count field.
media_pipeline_stop() is updated accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Drop redundant '!= NULL' as discussed]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a function to test if a pad is part of a pipeline currently
streaming, and use it through drivers to replace direct access to the
stream_count field. This will help reworking pipeline start/stop without
disturbing drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
'ent_enum->bmap' is a bitmap. So use 'bitmap_zalloc()' to simplify
code, improve the semantic and avoid some open-coded arithmetic in
allocator arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
While at it, remove a useless 'bitmap_zero()'.
Link: https://lore.kernel.org/linux-media/b11f646dda189f490c06bf671f64a2cc0af4d45c.1638397089.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The gobj_type() function translates the media object type into
a name, being useful for debugging purposes. It is currently
not used. So, drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Request API is currently used and specified as part of the
Memory-to-memory Stateless Video Decoder Interface [1].
This can now be considered as non-experimental and stable, given
the decoder API has been used by products since a couple years,
supported by several drivers and userspace frameworks,
[1] Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
