Commit Graph

40 Commits

Author SHA1 Message Date
Lennert Buytenhek
3b0c8d4038 ARM: plat-orion: irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
2011-01-13 17:19:12 +01:00
Russell King
f06a162462 ARM: orion: convert sched_clock() to use new infrastructure
Convert orion platforms to use the new sched_clock() infrastructure for
extending 32bit counters to full 64-bit nanoseconds.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 22:44:49 +00:00
Russell King
5e06b6492e ARM: ensure all sched_clock() implementations are notrace marked
ftrace requires sched_clock() to be notrace.  Ensure that all
implementations are so marked.  Also make sure that they include
linux/sched.h

Also ensure OMAP clocksource read functions are marked notrace as
they're used for sched_clock() too.

Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Eric Miao <eric.y.miao@gmail.com>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 22:44:42 +00:00
Russell King
1d0ac3cdf3 ARM: orion: update clock source registration
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new
interfaces were added which simplify (and optimize) the selection of the
divisor shift/mult constants.  Switch over to using this new interface.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 22:44:40 +00:00
Nicolas Pitre
3924996bab [ARM] Kirkwood: restrict the scope of the PCIe reset workaround
Commit 21f0ba90a4 "orion/kirkwood: reset PCIe unit on boot" made the
reset of the PCIe unit unconditional.  While this may fix problems on some
targets, this also causes problems on other targets.

Saeed Bishara <saeed@marvell.com> said about the original problem: "We
couln't pinpoint the root cause of this issue, actually we failed to
reproduce that issue."

So let's restrict the reset of the PCIe unit only to the target where
the original problem was observed.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-10-21 15:52:03 -04:00
Linus Torvalds
faa38b5e0e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits)
  ALSA: hda - Add pin-fix for HP dc5750
  ALSA: als4000: Fix potentially invalid DMA mode setup
  ALSA: als4000: enable burst mode
  ALSA: hda - Fix initial capsrc selection in patch_alc269()
  ASoC: TWL4030: Capture route runtime DAPM ordering fix
  ALSA: hda - Add PC-beep whitelist for an Intel board
  ALSA: hda - More relax for pending period handling
  ALSA: hda - Define AC_FMT_* constants
  ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
  ALSA: hda - Add support for HDMI HBR passthrough
  ALSA: hda - Set Stream Type in Stream Format according to AES0
  ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed
  ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
  ASoC: wm9081: fix resource reclaim in wm9081_register error path
  ASoC: wm8978: fix a memory leak if a wm8978_register fail
  ASoC: wm8974: fix a memory leak if another WM8974 is registered
  ASoC: wm8961: fix resource reclaim in wm8961_register error path
  ASoC: wm8955: fix resource reclaim in wm8955_register error path
  ASoC: wm8940: fix a memory leak if wm8940_register return error
  ASoC: wm8904: fix resource reclaim in wm8904_register error path
  ...
2010-08-07 17:07:31 -07:00
Olaf Rempel
21f0ba90a4 [ARM] orion/kirkwood: reset PCIe unit on boot
Patch found in QNAPs vendor source package, with some cleanups
(proper defines, shortened max. timeout from 1s to 200ms).

Without this patch the PCIe SATA controller (Marvell 88sx7042/sata_mv)
in my QNAP TS-419P (Marvell 88f6281/Kirkwood) stops working after a
few minutes.

The symptomes are described in this thread:
http://marc.info/?l=linux-ide&m=124822863706181&w=2

[ Note: this is a workaround in need of a better analysis/solution -- NP ]

Acked-by: Saeed Bishara <saeed@marvell.com>
Tested-by: Bernhard R. Link <brl@pcpool00.mathematik.uni-freiburg.de>
Seconded-by: Martin Michlmayr <tbm@cyrius.com>
I'm_not_very_happy_with_it-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16 22:01:57 -04:00
apatard@mandriva.com
49106c7290 orion/kirkwood: add audio functions.
This patch add audio related definitions and functions

Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-31 13:16:37 +01:00
Ben Dooks
eedfea2526 mtd: orion/kirkwood: add RnB line support to orion mtd driver
Add support for a board to register a callback to get the state of the
RnB line if it has it attached.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-14 01:04:19 +01:00
Lennert Buytenhek
7788cd5557 [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two
The PCIe inbound window size is supposed to be a power of two.  If
the total amount of RAM installed in the system is not a power of two,
round it up such that it is.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-12-28 23:50:49 -05:00
Martin Michlmayr
3e475f579e [ARM] Kirkwood: __init requires linux/init.h
Include linux/init.h for __init to fix this error:

CC [M]  drivers/net/wireless/wl12xx/boot.o
In file included from arch/arm/mach-kirkwood/include/mach/gpio.h:13,
                 from arch/arm/include/asm/gpio.h:5,
                 from include/linux/gpio.h:7,
                 from drivers/net/wireless/wl12xx/boot.c:24:
arch/arm/plat-orion/include/plat/gpio.h:32: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘orion_gpio_init’
make[6]: *** [drivers/net/wireless/wl12xx/boot.o] Error 1
make[5]: *** [drivers/net/wireless/wl12xx] Error 2

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24 11:55:59 -04:00
Nicolas Pitre
3b937a7dbd [ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdt
The Orion watchdog driver is also used on Kirkwood.

Convention is to use orion5x for stuff specific to 88F5xxx Orion chips
and simply "orion" for shared stuff across SoCs including Kirkwood.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:05:00 -04:00
Erik Benada
a88656553d [ARM] orion: convert gpio to use gpiolib
Signed-off-by: Erik Benada <erikbenada@yahoo.ca>

[ nico: fix locking, additional cleanups ]

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:57 -04:00
Nicolas Pitre
a399e3fa79 [ARM] orion: make sure sched_clock() usage of cnt32_to_63() is safe
With a TCLK = 200MHz, the half period of the hardware timer is roughly
10 seconds. Because cnt32_to_63() must be called at least once per
half period of the base hardware counter, it is a bit risky to rely
solely on scheduling to generate frequent enough calls. Let's use a
kernel timer to ensure this.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:54 -04:00
Stefan Agner
8a3269fc21 [ARM] orion: sched_clock implementation for orion platforms
sched_clock implementation for orion platform. Its realized using
free-running clocksource timer, which provides a resolution of 7.5ns
(depending on tclk). It's derived from PXA's sched_clock implementation.

[ nico: renamed orion2ns to tclk2ns, fixed max value in the comment ]

Signed-off-by: Stefan Agner <stefan.agner@yahoo.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:54 -04:00
Linus Torvalds
6ae85d6db4 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5460/1: Orion: reduce namespace pollution
  [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config
  [ARM] 5457/1: mach-imx gpio buildfix
  [ARM] 5456/1: add sys_preadv and sys_pwritev
  [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones
  [ARM] pxa/palm27x: General fix for Palm27x aSoC driver
  [ARM] pxa/mioa701: use GPIO95 as AC97 reset line
  [ARM] pxa: merge AC97 platform data structures
  [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h
2009-04-24 08:36:41 -07:00
Nicolas Pitre
fdd8b079e3 [ARM] 5460/1: Orion: reduce namespace pollution
Symbols like SOFT_RESET are way too generic to be exported at large.
To avoid this, let's move the mbus bridge register defines into a
separate file and include it where needed.  This affects mach-kirkwood,
mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all
share code in plat-orion which relies on those defines.

Some other defines have been moved to narrower scopes, or simply deleted
when they had no user.

This fixes compilation problem with mpt2sas on the above listed
platforms.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 23:25:41 +01:00
Magnus Damm
8e19608e8b clocksource: pass clocksource to read() callback
Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Russell King
ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Thomas Reitmayr
9e058d4f57 [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform data
The orion5x-wdt driver is now registered as a platform device and
receives the tclk value as platform data. This fixes a compile issue
cause by a previously removed define "ORION5X_TCLK".

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Kristof Provost <kristof@sigsegv.be>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Sylver Bruneau <sylver.bruneau@googlemail.com>
Cc: Kunihiko IMAI <bak@d2.dion.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-03-25 09:02:50 +00:00
Nicolas Pitre
8235ee009c [ARM] Kirkwood: SDIO driver registration for DB6281 and RD6281
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-26 20:22:26 -05:00
Nicolas Pitre
28d27cf4ce [ARM] Orion: make gpio /input/output validation separate
Especially on Kirkwood, a couple GPIOs are actually only output capable.
Let's separate the ability to configure a GPIO as input or output to
accommodate this restriction.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-19 22:26:58 -05:00
Nicolas Pitre
fd4b9b3650 [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support
The GPIO interrupts can be configured as either level triggered or edge
triggered, with a default of level triggered.  When an edge triggered
interrupt is requested, the gpio_irq_set_type method is called which
currently switches the given IRQ descriptor between two struct irq_chip
instances: orion_gpio_irq_level_chip and orion_gpio_irq_edge_chip. This
happens via __setup_irq() which also calls irq_chip_set_defaults() to
assign default methods to uninitialized ones.  The problem is that
irq_chip_set_defaults() is called before the irq_chip reference is
switched, leaving the new irq_chip (orion_gpio_irq_edge_chip in this
case) with uninitialized methods such as chip->startup() causing a kernel
oops.

Many solutions are possible, such as making irq_chip_set_defaults() global
and calling it from gpio_irq_set_type(), or calling __irq_set_trigger()
before irq_chip_set_defaults() in __setup_irq().  But those require
modifications to the generic IRQ code which might have adverse effect on
other architectures, and that would still be a fragile arrangement.
Manually copying the missing methods from within gpio_irq_set_type()
would be really ugly and it would break again the day new methods with
automatic defaults are added.

A better solution is to have a single irq_chip instance which can deal
with both edge and level triggered interrupts.  It is also a good idea
to switch the IRQ handler instead, as the edge IRQ handler allows for
one edge IRQ event to be queued as the IRQ is actually masked only when
that second IRQ is received, at which point the hardware can queue an
additional IRQ event, making edge triggered interrupts a bit more
reliable.

Tested-by: Martin Michlmayr <tbm@cyrius.com>

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-17 22:37:09 +00:00
Linus Torvalds
b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Lennert Buytenhek
07332318f3 [ARM] Orion: share GPIO IRQ handling code
Split off Orion GPIO IRQ handling code into plat-orion/.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-20 12:24:05 -05:00
Lennert Buytenhek
9569dae75f [ARM] Orion: share GPIO handling code
Split off Orion GPIO handling code into plat-orion/, and add
support for multiple sets of (32) GPIO pins.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-20 12:21:02 -05:00
Russell King
7e1548a597 Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2008-12-15 22:13:26 +00:00
Rusty Russell
320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Ronen Shitrit
fb6f552930 [ARM] Orion: add the option to support different ehci phy initialization
The Orion ehci driver serves the Orion, kirkwood and DD Soc families.
Since each of those integrate a different USB phy we should have the
ability to use few initialization sequences or to leave the boot loader
phy settings as is.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
2008-12-04 01:28:14 -05:00
Saeed Bishara
82676d7625 [ARM] Orion: fix bug in pcie configuration cycle function field mask
The function field is 3 bits.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-02 16:53:26 -05:00
Lennert Buytenhek
6f088f1d21 [ARM] Move include/asm-arm/plat-orion to arch/arm/plat-orion/include/plat
This patch performs the equivalent include directory shuffle for
plat-orion, and fixes up all users.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-09 13:44:58 +02:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Lennert Buytenhek
a9311cfed2 [ARM] Orion: PCIe x4/x1 detection support
The Discovery Duo (MV78xx0) has two x4 PCIe ports which can either
be used in x4 mode or in quad x1 mode.  This patch adds an accessor
function to the generic plat-orion PCIe handling code to detect in
which of the two modes we're running (which is determined by strap
pins and/or configured by the bootloader).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 22:45:09 +02:00
Ke Wei
1219715de7 [ARM] Orion: add a separate BRIDGE_INT_TIMER1_CLR define
Some Feroceon-based SoCs have an MBUS bridge interrupt controller
that requires writing a one instead of a zero to clear edge
interrupt sources such as timer expiry.

This patch adds a new BRIDGE_INT_TIMER1_CLR define, which platform
code can set to either ~BRIDGE_INT_TIMER1 (write-zero-to-clear) or
BRIDGE_INT_TIMER1 (write-one-to-clear) depending on the platform.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 22:45:01 +02:00
Lennert Buytenhek
000e99c333 [ARM] Orion: top-level IRQs are level-triggered
Make it clear that Orion top-level IRQs are level-triggered.  This
means that we don't need an ->ack() handler, or at least, we don't
need the ->ack() handler (or the acking part of the ->mask_ack()
handler) to actually do anything.

Given that, we might as well point our ->mask_ack() handler at the
->mask() handler instead of providing a dummy ->ack() handler, since
providing a ->mask_ack() handler on level IRQ sources will prevent
->ack() from ever being called.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Russell King <linux@arm.linux.org.uk>
2008-06-22 22:44:43 +02:00
Nicolas Pitre
b488a5ed12 [ARM] 4954/1: Orion: fix some function section mismatch
Without this, lspci won't work.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10 15:27:09 +01:00
Lennert Buytenhek
2bac1de203 plat-orion: share time handling code
Split off Orion time handling code into plat-orion/.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-27 14:51:40 -04:00
Lennert Buytenhek
abc0197d7a plat-orion: share PCIe handling code
Split off Orion PCIe handling code into plat-orion/.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-27 14:51:40 -04:00
Lennert Buytenhek
01eb569823 plat-orion: share IRQ handling code
Split off Orion IRQ handling code into plat-orion/, and add
support for multiple sets of (32) interrupts.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-27 14:51:40 -04:00
Lennert Buytenhek
69b02f6a96 plat-orion: introduce
Create arch/arm/plat-orion/, for peripherals shared between various
Marvell Orion SoCs.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-27 14:51:39 -04:00