While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2 ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follows up on:
https://lore.kernel.org/all/20220809170518.164662-1-cascardo@canonical.com/
handle of 0 implies from/to of universe realm which is not very
sensible.
Lets see what this patch will do:
$sudo tc qdisc add dev $DEV root handle 1:0 prio
//lets manufacture a way to insert handle of 0
$sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 \
route to 0 from 0 classid 1:10 action ok
//gets rejected...
Error: handle of 0 is not valid.
We have an error talking to the kernel, -1
//lets create a legit entry..
sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 route from 10 \
classid 1:10 action ok
//what did the kernel insert?
$sudo tc filter ls dev $DEV parent 1:0
filter protocol ip pref 100 route chain 0
filter protocol ip pref 100 route chain 0 fh 0x000a8000 flowid 1:10 from 10
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
//Lets try to replace that legit entry with a handle of 0
$ sudo tc filter replace dev $DEV parent 1:0 protocol ip prio 100 \
handle 0x000a8000 route to 0 from 0 classid 1:10 action drop
Error: Replacing with handle of 0 is invalid.
We have an error talking to the kernel, -1
And last, lets run Cascardo's POC:
$ ./poc
0
0
-22
-22
-22
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a route filter is replaced and the old filter has a 0 handle, the old
one won't be removed from the hashtable, while it will still be freed.
The test was there since before commit 1109c00547 ("net: sched: RCU
cls_route"), when a new filter was not allocated when there was an old one.
The old filter was reused and the reinserting would only be necessary if an
old filter was replaced. That was still wrong for the same case where the
old handle was 0.
Remove the old filter from the list independently from its handle value.
This fixes CVE-2022-2588, also reported as ZDI-CAN-17440.
Reported-by: Zhenpeng Lin <zplin@u.northwestern.edu>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Kamal Mostafa <kamal@canonical.com>
Cc: <stable@vger.kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220809170518.164662-1-cascardo@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the bonding driver keeps track of the last TX time of ARP and
NS probes, we effectively revert the following commits:
32d3e51a82 ("net_sched: use macvlan real dev trans_start in dev_trans_start()")
07ce76aa9b ("net_sched: make dev_trans_start return vlan's real dev trans_start")
Note that the approach of continuing to hack at this function would not
get us very far, hence the desire to take a different approach. DSA is
also a virtual device that uses NETIF_F_LLTX, but there, many uppers
share the same lower (DSA master, i.e. the physical host port of a
switch). By making dev_trans_start() on a DSA interface return the
dev_trans_start() of the master, we effectively assume that all other
DSA interfaces are silent, otherwise this corrupts the validity of the
probe timestamp data from the bonding driver's perspective.
Furthermore, the hacks didn't take into consideration the fact that the
lower interface of @dev may not have been physical either. For example,
VLAN over VLAN, or DSA with 2 masters in a LAG.
And even furthermore, there are NETIF_F_LLTX devices which are not
stacked, like veth. The hack here would not work with those, because it
would not have to provide the bonding driver something to chew at all.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: PPPoE offload support
Marcin Szycik says:
Add support for dissecting PPPoE and PPP-specific fields in flow dissector:
PPPoE session id and PPP protocol type. Add support for those fields in
tc-flower and support offloading PPPoE. Finally, add support for hardware
offload of PPPoE packets in switchdev mode in ice driver.
Example filter:
tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \
1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to use the new fields (will be submitted
soon).
ICE COMMS DDP package is required to create a filter in ice.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add support for PPPoE hardware offload
flow_offload: Introduce flow_match_pppoe
net/sched: flower: Add PPPoE filter
flow_dissector: Add PPPoE dissectors
====================
Link: https://lore.kernel.org/r/20220726203133.2171332-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for PPPoE specific fields for tc-flower.
Those fields can be provided only when protocol was set
to ETH_P_PPP_SES. Defines, dump, load and set are being done here.
Overwrite basic.n_proto only in case of PPP_IP and PPP_IPV6,
otherwise leave it as ETH_P_PPP_SES.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Simplify nf_ct_get_tuple(), from Jackie Liu.
2) Add format to request_module() call, from Bill Wendling.
3) Add /proc/net/stats/nf_flowtable to monitor in-flight pending
hardware offload objects to be processed, from Vlad Buslov.
4) Missing rcu annotation and accessors in the netfilter tree,
from Florian Westphal.
5) Merge h323 conntrack helper nat hooks into single object,
also from Florian.
6) A batch of update to fix sparse warnings treewide,
from Florian Westphal.
7) Move nft_cmp_fast_mask() where it used, from Florian.
8) Missing const in nf_nat_initialized(), from James Yonan.
9) Use bitmap API for Maglev IPVS scheduler, from Christophe Jaillet.
10) Use refcount_inc instead of _inc_not_zero in flowtable,
from Florian Westphal.
11) Remove pr_debug in xt_TPROXY, from Nathan Cancellor.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: xt_TPROXY: remove pr_debug invocations
netfilter: flowtable: prefer refcount_inc
netfilter: ipvs: Use the bitmap API to allocate bitmaps
netfilter: nf_nat: in nf_nat_initialized(), use const struct nf_conn *
netfilter: nf_tables: move nft_cmp_fast_mask to where its used
netfilter: nf_tables: use correct integer types
netfilter: nf_tables: add and use BE register load-store helpers
netfilter: nf_tables: use the correct get/put helpers
netfilter: x_tables: use correct integer types
netfilter: nfnetlink: add missing __be16 cast
netfilter: nft_set_bitmap: Fix spelling mistake
netfilter: h323: merge nat hook pointers into one
netfilter: nf_conntrack: use rcu accessors where needed
netfilter: nf_conntrack: add missing __rcu annotations
netfilter: nf_flow_table: count pending offload workqueue tasks
net/sched: act_ct: set 'net' pointer when creating new nf_flow_table
netfilter: conntrack: use correct format characters
netfilter: conntrack: use fallthrough to cleanup
====================
Link: https://lore.kernel.org/r/20220720230754.209053-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit refactored the flow action initialization sequence to
use an interface method when translating tc action instances to flow
offload objects. The refactored version skips the initialization of the
generic flow action attributes for tc actions, such as pedit, that allocate
more than one offload entry. This can cause potential issues for drivers
mapping flow action ids.
Populate the generic flow action fields for all the flow action entries.
Fixes: c54e1d920f ("flow_offload: add ops to tc_action_ops for flow action setup")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
----
v1 -> v2:
- coalese the generic flow action fields initialization to a single loop
Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
delay_timer has been unused since commit c3498d34dd ("cbq: remove
TCA_CBQ_OVL_STRATEGY support"). Delete it.
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return value of unregister_tcf_proto_ops is unused, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So it can be used for port range filter offloading.
Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following patches in series use the pointer to access flow table offload
debug variables.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even
though it was supported by mlx5 matchall offload implementation, which
didn't verify the action type but instead assumed that any single police
action attached to matchall classifier is a 'continue' action. Lack of
action type check made it non-obvious what mlx5 matchall implementation
actually supports and caused implementers and reviewers of referenced
commits to disallow it as a part of improved validation code.
Fixes: b8cd5831c6 ("net: flow_offload: add tc police action parameters")
Fixes: b50e462bc2 ("net/sched: act_police: Add extack messages for offload failure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Time-sensitive networking code needs to work with PTP times expressed in
nanoseconds, and with packet transmission times expressed in
picoseconds, since those would be fractional at higher than gigabit
speed when expressed in nanoseconds.
Convert the existing uses in tc-taprio and the ocelot/felix DSA driver
to a PSEC_PER_NSEC macro. This macro is placed in include/linux/time64.h
as opposed to its relatives (PSEC_PER_SEC etc) from include/vdso/time64.h
because the vDSO library does not (yet) need/use it.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for the vDSO parts
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1 ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e3 ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If during an action flush operation one of the actions is still being
referenced, the flush operation is aborted and the kernel returns to
user space with an error. However, if the kernel was able to flush, for
example, 3 actions and failed on the fourth, the kernel will not notify
user space that it deleted 3 actions before failing.
This patch fixes that behaviour by notifying user space of how many
actions were deleted before flush failed and by setting extack with a
message describing what happened.
Fixes: 55334a5db5 ("net_sched: act: refuse to remove bound action outside")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by Yuming, currently tc always show a latency of UINT_MAX
for netem Qdisc's on 32-bit platforms:
$ tc qdisc add dev dummy0 root netem latency 100ms
$ tc qdisc show dev dummy0
qdisc netem 8001: root refcnt 2 limit 1000 delay 275s 275s
^^^^^^^^^^^^^^^^
Let us take a closer look at netem_dump():
qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency,
UINT_MAX);
qopt.latency is __u32, psched_tdiff_t is signed long,
(psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so
qopt.latency is always UINT_MAX.
Fix it by using psched_time_t (u64) instead.
Note: confusingly, users have two ways to specify 'latency':
1. normally, via '__u32 latency' in struct tc_netem_qopt;
2. via the TCA_NETEM_LATENCY64 attribute, which is s64.
For the second case, theoretically 'latency' could be negative. This
patch ignores that corner case, since it is broken (i.e. assigning a
negative s64 to __u32) anyways, and should be handled separately.
Thanks Ted Lin for the analysis [1] .
[1] https://github.com/raspberrypi/linux/issues/3512
Reported-by: Yuming Chen <chenyuming.junnan@bytedance.com>
Fixes: 112f9cb656 ("netem: convert to qdisc_watchdog_schedule_ns")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20220616234336.2443-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
Rename:
dev_hold_track() -> netdev_hold()
dev_put_track() -> netdev_put()
dev_replace_track() -> netdev_ref_replace()
Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tcf_ct_flow_table_fill_tuple_ipv6() function is supposed to return
false on failure. It should not return negatives because that means
succes/true.
Fixes: fcb6aa8653 ("act_ct: Support GRE offload")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Link: https://lore.kernel.org/r/YpYFnbDxFl6tQ3Bn@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot was able to trigger an Out-of-Bound on the pedit action:
UBSAN: shift-out-of-bounds in net/sched/act_pedit.c:238:43
shift exponent 1400735974 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 3606 Comm: syz-executor151 Not tainted 5.18.0-rc5-syzkaller-00165-g810c2f0a3f86 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x50 lib/ubsan.c:151
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x187 lib/ubsan.c:322
tcf_pedit_init.cold+0x1a/0x1f net/sched/act_pedit.c:238
tcf_action_init_1+0x414/0x690 net/sched/act_api.c:1367
tcf_action_init+0x530/0x8d0 net/sched/act_api.c:1432
tcf_action_add+0xf9/0x480 net/sched/act_api.c:1956
tc_ctl_action+0x346/0x470 net/sched/act_api.c:2015
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5993
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e2/0x800 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fe36e9e1b59
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffef796fe88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe36e9e1b59
RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
RBP: 00007fe36e9a5d00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe36e9a5d90
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The 'shift' field is not validated, and any value above 31 will
trigger out-of-bounds. The issue predates the git history, but
syzbot was able to trigger it only after the commit mentioned in
the fixes tag, and this change only applies on top of such commit.
Address the issue bounding the 'shift' value to the maximum allowed
by the relevant operator.
Reported-and-tested-by: syzbot+8ed8fc4c57e9dcf23ca6@syzkaller.appspotmail.com
Fixes: 8b796475fd ("net/sched: act_pedit: really ensure the skb is writable")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk->sk_bound_dev_if can change under us, use READ_ONCE() annotation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently pedit tries to ensure that the accessed skb offset
is writable via skb_unclone(). The action potentially allows
touching any skb bytes, so it may end-up modifying shared data.
The above causes some sporadic MPTCP self-test failures, due to
this code:
tc -n $ns2 filter add dev ns2eth$i egress \
protocol ip prio 1000 \
handle 42 fw \
action pedit munge offset 148 u8 invert \
pipe csum tcp \
index 100
The above modifies a data byte outside the skb head and the skb is
a cloned one, carrying a TCP output packet.
This change addresses the issue by keeping track of a rough
over-estimate highest skb offset accessed by the action and ensuring
such offset is really writable.
Note that this may cause performance regressions in some scenarios,
but hopefully pedit is not in the critical path.
Fixes: db2c24175d ("act_pedit: access skb->data safely")
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/1fcf78e6679d0a287dd61bb0f04730ce33b3255d.1652194627.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch the existence of vlan filters was conditional on the vlan
protocol being matched in the tc rule. For example, the following rule:
tc filter add dev eth1 ingress flower vlan_prio 5
was illegal because vlan protocol (e.g. 802.1q) does not appear in the rule.
Remove the above restriction by looking at the num_of_vlans filter to
allow further matching on vlan attributes. The following rule becomes
legal as a result of this commit:
tc filter add dev eth1 ingress flower num_of_vlans 1 vlan_prio 5
because having num_of_vlans==1 implies that the packet is single tagged.
Change is_vlan_key helper to look at the number of vlans in addition to
the vlan ethertype. The outcome of this change is that outer (e.g. vlan_prio)
and inner (e.g. cvlan_prio) tag vlan filters require the number of vlan
tags to be greater then 0 and 1 accordingly.
As a result of is_vlan_key change, the ethertype may be set to 0 when
matching on the number of vlans. Update fl_set_key_vlan to avoid setting
key, mask vlan_tpid for the 0 ethertype.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are bookkeeping parts of the new num_of_vlans filter.
Defines, dump, load and set are being done here.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are somewhat repetitive ethertype checks in fl_set_key. Refactor
them into is_vlan_key helper function.
To make the changes clearer, avoid touching identation levels. This is
the job for the next patch in the series.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes issue:
* If we install tc filters with act_skbedit in clsact hook.
It doesn't work, because netdev_core_pick_tx() overwrites
queue_mapping.
$ tc filter ... action skbedit queue_mapping 1
And this patch is useful:
* We can use FQ + EDT to implement efficient policies. Tx queues
are picked by xps, ndo_select_queue of netdev driver, or skb hash
in netdev_core_pick_tx(). In fact, the netdev driver, and skb
hash are _not_ under control. xps uses the CPUs map to select Tx
queues, but we can't figure out which task_struct of pod/containter
running on this cpu in most case. We can use clsact filters to classify
one pod/container traffic to one Tx queue. Why ?
In containter networking environment, there are two kinds of pod/
containter/net-namespace. One kind (e.g. P1, P2), the high throughput
is key in these applications. But avoid running out of network resource,
the outbound traffic of these pods is limited, using or sharing one
dedicated Tx queues assigned HTB/TBF/FQ Qdisc. Other kind of pods
(e.g. Pn), the low latency of data access is key. And the traffic is not
limited. Pods use or share other dedicated Tx queues assigned FIFO Qdisc.
This choice provides two benefits. First, contention on the HTB/FQ Qdisc
lock is significantly reduced since fewer CPUs contend for the same queue.
More importantly, Qdisc contention can be eliminated completely if each
CPU has its own FIFO Qdisc for the second kind of pods.
There must be a mechanism in place to support classifying traffic based on
pods/container to different Tx queues. Note that clsact is outside of Qdisc
while Qdisc can run a classifier to select a sub-queue under the lock.
In general recording the decision in the skb seems a little heavy handed.
This patch introduces a per-CPU variable, suggested by Eric.
The xmit.skip_txqueue flag is firstly cleared in __dev_queue_xmit().
- Tx Qdisc may install that skbedit actions, then xmit.skip_txqueue flag
is set in qdisc->enqueue() though tx queue has been selected in
netdev_tx_queue_mapping() or netdev_core_pick_tx(). That flag is cleared
firstly in __dev_queue_xmit(), is useful:
- Avoid picking Tx queue with netdev_tx_queue_mapping() in next netdev
in such case: eth0 macvlan - eth0.3 vlan - eth0 ixgbe-phy:
For example, eth0, macvlan in pod, which root Qdisc install skbedit
queue_mapping, send packets to eth0.3, vlan in host. In __dev_queue_xmit() of
eth0.3, clear the flag, does not select tx queue according to skb->queue_mapping
because there is no filters in clsact or tx Qdisc of this netdev.
Same action taked in eth0, ixgbe in Host.
- Avoid picking Tx queue for next packet. If we set xmit.skip_txqueue
in tx Qdisc (qdisc->enqueue()), the proper way to clear it is clearing it
in __dev_queue_xmit when processing next packets.
For performance reasons, use the static key. If user does not config the NET_EGRESS,
the patch will not be compiled.
+----+ +----+ +----+
| P1 | | P2 | | Pn |
+----+ +----+ +----+
| | |
+-----------+-----------+
|
| clsact/skbedit
| MQ
v
+-----------+-----------+
| q0 | q1 | qn
v v v
HTB/FQ HTB/FQ ... FIFO
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Wei Wang <weiwan@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While investigating a related syzbot report,
I found that whenever call to tcf_exts_init()
from u32_init_knode() is failing, we end up
with an elevated refcount on ht->refcnt
To avoid that, only increase the refcount after
all possible errors have been evaluated.
Fixes: b9a24bb76b ("net_sched: properly handle failure case of tcf_exts_init()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some unknown reason qdisc_reset() is using
a convoluted way of freeing two lists of skbs.
Use __skb_queue_purge() instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220414011004.2378350-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A user may set the SO_TXTIME socket option to ensure a packet is send
at a given time. The taprio scheduler has to confirm, that it is allowed
to send a packet at that given time, by a check against the packet time
schedule. The scheduler drop the packet, if the gates are closed at the
given send time.
The check, if SO_TXTIME is set, may fail since sk_flags are part of an
union and the union is used otherwise. This happen, if a socket is not
a full socket, like a request socket for example.
Add a check to verify, if the union is used for sk_flags.
Fixes: 4cfd5779bd ("taprio: Add support for txtime-assist mode")
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when inserting a new filter that needs to sit at the head
of chain 0, it will first update the heads pointer on all devices using
the (shared) block, and only then complete the initialization of the new
element so that it has a "next" element.
This can lead to a situation that the chain 0 head is propagated to
another CPU before the "next" initialization is done. When this race
condition is triggered, packets being matched on that CPU will simply
miss all other filters, and will flow through the stack as if there were
no other filters installed. If the system is using OVS + TC, such
packets will get handled by vswitchd via upcall, which results in much
higher latency and reordering. For other applications it may result in
packet drops.
This is reproducible with a tc only setup, but it varies from system to
system. It could be reproduced with a shared block amongst 10 veth
tunnels, and an ingress filter mirroring packets to another veth.
That's because using the last added veth tunnel to the shared block to
do the actual traffic, it makes the race window bigger and easier to
trigger.
The fix is rather simple, to just initialize the next pointer of the new
filter instance (tp) before propagating the head change.
The fixes tag is pointing to the original code though this issue should
only be observed when using it unlocked.
Fixes: 2190d1d094 ("net: sched: introduce helpers to work with filter chains")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/b97d5f4eaffeeb9d058155bcab63347527261abf.1649341369.git.marcelo.leitner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The various error paths of tc_setup_offload_action() now report specific
error messages. Remove the generic messages to avoid overwriting the
more specific ones.
Before:
# tc filter add dev dummy0 ingress pref 1 proto ip flower skip_sw dst_ip 198.51.100.1 action police rate 100Mbit burst 10000
Error: cls_flower: Failed to setup flow action.
We have an error talking to the kernel
After:
# tc filter add dev dummy0 ingress pref 1 proto ip flower skip_sw dst_ip 198.51.100.1 action police rate 100Mbit burst 10000
Error: act_police: Offload not supported when conform/exceed action is "reclassify".
We have an error talking to the kernel
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The various error paths of tc_setup_offload_action() now report specific
error messages. Remove the generic messages to avoid overwriting the
more specific ones.
Before:
# tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action police rate 100Mbit burst 10000
Error: cls_matchall: Failed to setup flow action.
We have an error talking to the kernel
After:
# tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action police rate 100Mbit burst 10000
Error: act_police: Offload not supported when conform/exceed action is "reclassify".
We have an error talking to the kernel
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For better error reporting to user space, add an extack message when the
requested action does not support offload.
Example:
# echo 1 > /sys/kernel/tracing/events/netlink/netlink_extack/enable
# tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action nat ingress 192.0.2.1 198.51.100.1
Error: cls_matchall: Failed to setup flow action.
We have an error talking to the kernel
# cat /sys/kernel/tracing/trace_pipe
tc-181 [000] b..1. 88.406093: netlink_extack: msg=Action does not support offload
tc-181 [000] ..... 88.406108: netlink_extack: msg=cls_matchall: Failed to setup flow action
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For better error reporting to user space, add an extack message when
vlan action offload fails.
Currently, the failure cannot be triggered, but add a message in case
the action is extended in the future to support more than the current
set of modes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For better error reporting to user space, add an extack message when
tunnel_key action offload fails.
Currently, the failure cannot be triggered, but add a message in case
the action is extended in the future to support more than set/release
modes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For better error reporting to user space, add extack messages when
skbedit action offload fails.
Example:
# echo 1 > /sys/kernel/tracing/events/netlink/netlink_extack/enable
# tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action skbedit queue_mapping 1234
Error: cls_matchall: Failed to setup flow action.
We have an error talking to the kernel
# cat /sys/kernel/tracing/trace_pipe
tc-185 [002] b..1. 31.802414: netlink_extack: msg=act_skbedit: Offload not supported when "queue_mapping" option is used
tc-185 [002] ..... 31.802418: netlink_extack: msg=cls_matchall: Failed to setup flow action
# tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action skbedit inheritdsfield
Error: cls_matchall: Failed to setup flow action.
We have an error talking to the kernel
# cat /sys/kernel/tracing/trace_pipe
tc-187 [002] b..1. 45.985145: netlink_extack: msg=act_skbedit: Offload not supported when "inheritdsfield" option is used
tc-187 [002] ..... 45.985160: netlink_extack: msg=cls_matchall: Failed to setup flow action
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For better error reporting to user space, add extack messages when
police action offload fails.
Example:
# echo 1 > /sys/kernel/tracing/events/netlink/netlink_extack/enable
# tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action police rate 100Mbit burst 10000
Error: cls_matchall: Failed to setup flow action.
We have an error talking to the kernel
# cat /sys/kernel/tracing/trace_pipe
tc-182 [000] b..1. 21.592969: netlink_extack: msg=act_police: Offload not supported when conform/exceed action is "reclassify"
tc-182 [000] ..... 21.592982: netlink_extack: msg=cls_matchall: Failed to setup flow action
# tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action police rate 100Mbit burst 10000 conform-exceed drop/continue
Error: cls_matchall: Failed to setup flow action.
We have an error talking to the kernel
# cat /sys/kernel/tracing/trace_pipe
tc-184 [000] b..1. 38.882579: netlink_extack: msg=act_police: Offload not supported when conform/exceed action is "continue"
tc-184 [000] ..... 38.882593: netlink_extack: msg=cls_matchall: Failed to setup flow action
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For better error reporting to user space, add an extack message when
pedit action offload fails.
Currently, the failure cannot be triggered, but add a message in case
the action is extended in the future to support more than set/add
commands.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For better error reporting to user space, add extack messages when mpls
action offload fails.
Example:
# echo 1 > /sys/kernel/tracing/events/netlink/netlink_extack/enable
# tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action mpls dec_ttl
Error: cls_matchall: Failed to setup flow action.
We have an error talking to the kernel
# cat /sys/kernel/tracing/trace_pipe
tc-182 [000] b..1. 18.693915: netlink_extack: msg=act_mpls: Offload not supported when "dec_ttl" option is used
tc-182 [000] ..... 18.693921: netlink_extack: msg=cls_matchall: Failed to setup flow action
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
