Commit Graph

21 Commits

Author SHA1 Message Date
Sheng Yong
f6df8f234e f2fs: introduce sysfs readdir_ra to readahead inode block in readdir
This patch introduces a sysfs interface readdir_ra to enable/disable
readaheading inode block in f2fs_readdir. When readdir_ra is enabled,
it improves the performance of "readdir + stat".

For 300,000 files:
	time find /data/test > /dev/null
disable readdir_ra: 1m25.69s real  0m01.94s user  0m50.80s system
enable  readdir_ra: 0m18.55s real  0m00.44s user  0m15.39s system

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-02 19:27:27 -08:00
Chao Yu
a2a12b679f f2fs: export SSR allocation threshold
This patch exports min_ssr_segments threshold in sysfs to let user
control triggering SSR allocation flexibly.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05 16:41:57 -08:00
Chao Yu
b32d73abc6 f2fs: add missing sysfs description
There are some missing sysfs entries' description in document, add them.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05 16:41:53 -08:00
Yunlong Song
80d4214501 f2fs: support soft block reservation
It supports to extend reserved_blocks sysfs interface to be soft
threshold, which allows user configure it exceeding current available
user space. This patch also introduces a new sysfs interface called
current_reserved_blocks, which shows the current blocks that have
already been reserved.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05 16:41:52 -08:00
Chao Yu
969d1b180d f2fs: introduce discard_granularity sysfs entry
Commit d618ebaf0a ("f2fs: enable small discard by default") enables
f2fs to issue 4K size discard in real-time discard mode. However, issuing
smaller discard may cost more lifetime but releasing less free space in
flash device. Since f2fs has ability of separating hot/cold data and
garbage collection, we can expect that small-sized invalid region would
expand soon with OPU, deletion or garbage collection on valid datas, so
it's better to delay or skip issuing smaller size discards, it could help
to reduce overmuch consumption of IO bandwidth and lifetime of flash
storage.

This patch makes f2fs selectng 64K size as its default minimal
granularity, and issue discard with the size which is not smaller than
minimal granularity. Also it exposes discard granularity as sysfs entry
for configuration in different scenario.

Jaegeuk Kim:
 We must issue all the accumulated discard commands when fstrim is called.
 So, I've added pend_list_tag[] to indicate whether we should issue the
 commands or not. If tag sets P_ACTIVE or P_TRIM, we have to issue them.
 P_TRIM is set once at a time, given fstrim trigger.
 In addition, issue_discard_thread is calling too much due to the number of
 discard commands remaining in the pending list. I added a timer to control
 it likewise gc_thread.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-21 15:55:07 -07:00
Jaegeuk Kim
d9872a698c f2fs: introduce gc_urgent mode for background GC
This patch adds a sysfs entry to control urgent mode for background GC.
If this is set, background GC thread conducts GC with gc_urgent_sleep_time
all the time.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-15 10:40:12 -07:00
Chao Yu
daeb433e42 f2fs: introduce reserved_blocks in sysfs
In this patch, we add a new sysfs interface, with it, we can control
number of reserved blocks in system which could not be used by user,
it enable f2fs to let user to configure for adjusting over-provision
ratio dynamically instead of changing it by mkfs.

So we can expect it will help to reserve more free space for relieving
GC in both filesystem and flash device.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-07 10:34:41 -07:00
Chao Yu
56412894b3 f2fs: fix to document fault injection option and sysfs file
Commit 73faec4d99 ("f2fs: add mount option to select fault injection
ratio") and Commit 087968974f ("f2fs: add fault injection to sysfs")
forget to document mount option and sysfs file.

This patch fixes to document them.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-04 02:11:44 -07:00
Chao Yu
6f6d9fe2ab f2fs: fix incorrect document of batched_trim_sections
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-04 02:11:42 -07:00
Shuoran Liu
8f1dbbbbdf f2fs: introduce lifetime write IO statistics
This patch introduces lifetime IO write statistics exposed to the sysfs interface.
The write IO amount is obtained from block layer, accumulated in the file system and
stored in the hot node summary of checkpoint.

Signed-off-by: Shuoran Liu <liushuoran@huawei.com>
Signed-off-by: Pengyang Hou <houpengyang@huawei.com>
[Jaegeuk Kim: add sysfs documentation]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-22 16:07:23 -08:00
Chao Yu
2304cb0c44 f2fs: export dirty_nats_ratio in sysfs
This patch exports a new sysfs entry 'dirty_nat_ratio' to control threshold
of dirty nat entries, if current ratio exceeds configured threshold,
checkpoint will be triggered in f2fs_balance_fs_bg for flushing dirty nats.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-22 16:07:23 -08:00
Jaegeuk Kim
d0239e1bf5 f2fs: detect idle time depending on user behavior
This patch adds last time that user requested filesystem operations.
This information is used to detect whether system is idle or not later.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-11 15:56:37 -08:00
Chao Yu
ea1a29a0bd f2fs: export ra_nid_pages to sysfs
After finishing building free nid cache, we will try to readahead
asynchronously 4 more pages for the next reloading, the count of
readahead nid pages is fixed.

In some case, like SMR drive, read less sectors with fixed count
each time we trigger RA may be low efficient, since we will face
high seeking overhead, so we'd better let user to configure this
parameter from sysfs in specific workload.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-10-12 14:03:43 -07:00
Jaegeuk Kim
60b99b486b f2fs: introduce a periodic checkpoint flow
This patch introduces a periodic checkpoint feature.
Note that, this is not enforcing to conduct checkpoints very strictly in terms
of trigger timing, instead just hope to help user experiences.
The default value is 60 seconds.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-10-09 16:20:57 -07:00
Jaegeuk Kim
bba681cbb2 f2fs: introduce a batched trim
This patch introduces a batched trimming feature, which submits split discard
commands.

This is to avoid long latency due to huge trim commands.
If fstrim was triggered ranging from 0 to the end of device, we should lock
all the checkpoint-related mutexes, resulting in very long latency.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-02-11 17:04:44 -08:00
Jaegeuk Kim
c1ce1b02bb f2fs: give an option to enable in-place-updates during fsync to users
If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file
only starts to try in-place-updates.
And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it
keeps out-of-order manner. Otherwise, it triggers in-place-updates.

This may be used by storage showing very high random write performance.

For example, it can be used when,

Seq. writes (Data) + wait + Seq. writes (Node)

is pretty much slower than,

Rand. writes (Data)

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 04:10:44 -07:00
Jaegeuk Kim
9179682591 f2fs: add missing documentation for dir_level
This patch adds missing dir_level documentation.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:10 +09:00
Jaegeuk Kim
cdfc41c134 f2fs: throttle the memory footprint with a sysfs entry
This patch introduces ram_thresh, a sysfs entry, which controls the memory
footprint used by the free nid list and the nat cache.

Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat
cache was managed by NM_WOUT_THRESHOLD.
However, this approach cannot be applied dynamically according to the system.

So, this patch adds ram_thresh that users can specify the threshold, which is
in order of 1 / 1024.
For example, if the total ram size is 4GB and the value is set to 10 by default,
f2fs tries to control the number of free nids and nat caches not to consume over
10 * (4GB / 1024) = 10MB.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:09 +09:00
Jaegeuk Kim
3bac380c90 f2fs: update documents and a MAINTAINERS entry
This patch adds missing some description of sysfs entries in
 - Documentation/ABI/testing/sysfs-fs-f2fs
 - Documentation/filesystems/f2fs.txt.

And it adds a maintained document entry of F2FS in MAINTAINERS.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-09 21:00:06 +09:00
Namjae Jeon
d2dc095f42 f2fs: add sysfs entries to select the gc policy
Add sysfs entry gc_idle to control the gc policy. Where
gc_idle = 1 corresponds to selecting a cost benefit approach,
while gc_idle = 2 corresponds to selecting a greedy approach
to garbage collection. The selection is mutually exclusive one
approach will work at any point. If gc_idle = 0, then this
option is disabled.

Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: change the select_gc_type() flow slightly]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-06 22:00:18 +09:00
Namjae Jeon
b59d0bae6c f2fs: add sysfs support for controlling the gc_thread
Add sysfs entries to control the timing parameters for
f2fs gc thread.

Various Sysfs options introduced are:
gc_min_sleep_time: Min Sleep time for GC in ms
gc_max_sleep_time: Max Sleep time for GC in ms
gc_no_gc_sleep_time: Default Sleep time for GC in ms

Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: fix an umount bug and some minor changes]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-06 21:53:34 +09:00