mirror of
https://github.com/torvalds/linux.git
synced 2024-12-01 00:21:32 +00:00
c6cc9a852f
24884 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Athira Rajeev
|
c6cc9a852f |
powerpc/perf: Fix power10 event alternatives
When scheduling a group of events, there are constraint checks done to
make sure all events can go in a group. Example, one of the criteria is
that events in a group cannot use the same PMC. But platform specific
PMU supports alternative event for some of the event codes. During
perf_event_open(), if any event group doesn't match constraint check
criteria, further lookup is done to find alternative event.
By current design, the array of alternatives events in PMU code is
expected to be sorted by column 0. This is because in
find_alternative() the return criteria is based on event code
comparison. ie. "event < ev_alt[i][0])". This optimisation is there
since find_alternative() can be called multiple times. In power10 PMU
code, the alternative event array is not sorted properly and hence there
is breakage in finding alternative event.
To work with existing logic, fix the alternative event array to be
sorted by column 0 for power10-pmu.c
Results:
In case where an alternative event is not chosen when we could, events
will be multiplexed. ie, time sliced where it could actually run
concurrently.
Example, in power10 PM_INST_CMPL_ALT(0x00002) has alternative event,
PM_INST_CMPL(0x500fa). Without the fix, if a group of events with PMC1
to PMC4 is used along with PM_INST_CMPL_ALT, it will be time sliced
since all programmable PMC's are consumed already. But with the fix,
when it picks alternative event on PMC5, all events will run
concurrently.
Before:
# perf stat -e r00002,r100fc,r200fa,r300fc,r400fc
Performance counter stats for 'system wide':
328668935 r00002 (79.94%)
56501024 r100fc (79.95%)
49564238 r200fa (79.95%)
376 r300fc (80.19%)
660 r400fc (79.97%)
4.039150522 seconds time elapsed
With the fix, since alternative event is chosen to run on PMC6, events
will be run concurrently.
After:
# perf stat -e r00002,r100fc,r200fa,r300fc,r400fc
Performance counter stats for 'system wide':
23596607 r00002
4907738 r100fc
2283608 r200fa
135 r300fc
248 r400fc
1.664671390 seconds time elapsed
Fixes:
|
||
|
Athira Rajeev
|
0dcad700bb |
powerpc/perf: Fix power9 event alternatives
When scheduling a group of events, there are constraint checks done to
make sure all events can go in a group. Example, one of the criteria is
that events in a group cannot use the same PMC. But platform specific
PMU supports alternative event for some of the event codes. During
perf_event_open(), if any event group doesn't match constraint check
criteria, further lookup is done to find alternative event.
By current design, the array of alternatives events in PMU code is
expected to be sorted by column 0. This is because in
find_alternative() the return criteria is based on event code
comparison. ie. "event < ev_alt[i][0])". This optimisation is there
since find_alternative() can be called multiple times. In power9 PMU
code, the alternative event array is not sorted properly and hence there
is breakage in finding alternative events.
To work with existing logic, fix the alternative event array to be
sorted by column 0 for power9-pmu.c
Results:
With alternative events, multiplexing can be avoided. That is, for
example, in power9 PM_LD_MISS_L1 (0x3e054) has alternative event,
PM_LD_MISS_L1_ALT (0x400f0). This is an identical event which can be
programmed in a different PMC.
Before:
# perf stat -e r3e054,r300fc
Performance counter stats for 'system wide':
1057860 r3e054 (50.21%)
379 r300fc (49.79%)
0.944329741 seconds time elapsed
Since both the events are using PMC3 in this case, they are
multiplexed here.
After:
# perf stat -e r3e054,r300fc
Performance counter stats for 'system wide':
1006948 r3e054
182 r300fc
Fixes:
|
||
Alexey Kardashevskiy
|
26a62b750a |
KVM: PPC: Fix TCE handling for VFIO
The LoPAPR spec defines a guest visible IOMMU with a variable page size.
Currently QEMU advertises 4K, 64K, 2M, 16MB pages, a Linux VM picks
the biggest (16MB). In the case of a passed though PCI device, there is
a hardware IOMMU which does not support all pages sizes from the above -
P8 cannot do 2MB and P9 cannot do 16MB. So for each emulated
16M IOMMU page we may create several smaller mappings ("TCEs") in
the hardware IOMMU.
The code wrongly uses the emulated TCE index instead of hardware TCE
index in error handling. The problem is easier to see on POWER8 with
multi-level TCE tables (when only the first level is preallocated)
as hash mode uses real mode TCE hypercalls handlers.
The kernel starts using indirect tables when VMs get bigger than 128GB
(depends on the max page order).
The very first real mode hcall is going to fail with H_TOO_HARD as
in the real mode we cannot allocate memory for TCEs (we can in the virtual
mode) but on the way out the code attempts to clear hardware TCEs using
emulated TCE indexes which corrupts random kernel memory because
it_offset==1<<59 is subtracted from those indexes and the resulting index
is out of the TCE table bounds.
This fixes kvmppc_clear_tce() to use the correct TCE indexes.
While at it, this fixes TCE cache invalidation which uses emulated TCE
indexes instead of the hardware ones. This went unnoticed as 64bit DMA
is used these days and VMs map all RAM in one go and only then do DMA
and this is when the TCE cache gets populated.
Potentially this could slow down mapping, however normally 16MB
emulated pages are backed by 64K hardware pages so it is one write to
the "TCE Kill" per 256 updates which is not that bad considering the size
of the cache (1024 TCEs or so).
Fixes:
|
||
Michael Ellerman
|
d2b9be1f4a |
powerpc/time: Always set decrementer in timer_interrupt()
This is a partial revert of commit |
||
Linus Torvalds
|
33563138ac |
Driver core changes for 5.18-rc2
Here are 2 small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and then
one new user snuck in. So this series has 2 changes:
- removal of the default_attrs field in the powerpc/pseries/vas
code. Change has been acked by the PPC maintainers to come
through this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed. This cleans up the kobject code
a little bit and removes some duplicated functionality that
confused people (now there is only one way to do default
groups.)
All of these have been in linux-next for all of this week with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYlLRHg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn+9gCfXN0OvKmw5QD55z8YGp/jIycK0ToAnifJ/OX+
sU2V8ZQfNbV8xw7iXfc2
=L+Uc
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
|
||
|
Linus Torvalds
|
4ea3c64252 |
powerpc fixes for 5.18 #2
- Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the guest could be
lost (or delayed until the next guest exit).
- Disable SCV (system call vectored) when PR KVM guests could be run.
- Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR guests.
- Add a new KVM CAP to indicate if AIL == 3 is supported.
- Fix a regression when hotplugging a CPU to a memoryless/cpuless node.
- Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which fixes crashes seen
due to hardened usercopy.
- Revert a change to max_mapnr which broke HIGHMEM.
Thanks to: Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin, Srikar Dronamraju.
-----BEGIN PGP SIGNATURE-----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=uNqF
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
guest could be lost (or delayed until the next guest exit).
- Disable SCV (system call vectored) when PR KVM guests could be run.
- Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
guests.
- Add a new KVM CAP to indicate if AIL == 3 is supported.
- Fix a regression when hotplugging a CPU to a memoryless/cpuless node.
- Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
fixes crashes seen due to hardened usercopy.
- Revert a change to max_mapnr which broke HIGHMEM.
Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.
* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: Set max_mapnr correctly"
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
powerpc/numa: Handle partially initialized numa nodes
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
KVM: PPC: Book3S PR: Disallow AIL != 0
KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
KVM: PPC: Book3S HV P9: Fix "lost kick" race
|
||
Kefeng Wang
|
1ff5c8e8c8 |
Revert "powerpc: Set max_mapnr correctly"
This reverts commit |
||
|
Kefeng Wang
|
ffa0b64e3b |
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
mpe: On 64-bit Book3E vmalloc space starts at 0x8000000000000000.
Because of the way __pa() works we have:
__pa(0x8000000000000000) == 0, and therefore
virt_to_pfn(0x8000000000000000) == 0, and therefore
virt_addr_valid(0x8000000000000000) == true
Which is wrong, virt_addr_valid() should be false for vmalloc space.
In fact all vmalloc addresses that alias with a valid PFN will return
true from virt_addr_valid(). That can cause bugs with hardened usercopy
as described below by Kefeng Wang:
When running ethtool eth0 on 64-bit Book3E, a BUG occurred:
usercopy: Kernel memory exposure attempt detected from SLUB object not in SLUB page?! (offset 0, size 1048)!
kernel BUG at mm/usercopy.c:99
...
usercopy_abort+0x64/0xa0 (unreliable)
__check_heap_object+0x168/0x190
__check_object_size+0x1a0/0x200
dev_ethtool+0x2494/0x2b20
dev_ioctl+0x5d0/0x770
sock_do_ioctl+0xf0/0x1d0
sock_ioctl+0x3ec/0x5a0
__se_sys_ioctl+0xf0/0x160
system_call_exception+0xfc/0x1f0
system_call_common+0xf8/0x200
The code shows below,
data = vzalloc(array_size(gstrings.len, ETH_GSTRING_LEN));
copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN))
The data is alloced by vmalloc(), virt_addr_valid(ptr) will return true
on 64-bit Book3E, which leads to the panic.
As commit
|
||
Greg Kroah-Hartman
|
c31bc0461f |
powerpc/pseries/vas: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the pseries vas sysfs code to use default_groups field
which has been the preferred way since
|
||
Christophe Leroy
|
5517d50082 |
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
When a static call is updated with __static_call_return0() as target, arch_static_call_transform() set it to use an optimised set of instructions which are meant to lay in the same cacheline. But when initialising a static call with DEFINE_STATIC_CALL_RET0(), we get a branch to the real __static_call_return0() function instead of getting the optimised setup: c00d8120 <__SCT__perf_snapshot_branch_stack>: c00d8120: 4b ff ff f4 b c00d8114 <__static_call_return0> c00d8124: 3d 80 c0 0e lis r12,-16370 c00d8128: 81 8c 81 3c lwz r12,-32452(r12) c00d812c: 7d 89 03 a6 mtctr r12 c00d8130: 4e 80 04 20 bctr c00d8134: 38 60 00 00 li r3,0 c00d8138: 4e 80 00 20 blr c00d813c: 00 00 00 00 .long 0x0 Add ARCH_DEFINE_STATIC_CALL_RET0_TRAMP() defined by each architecture to setup the optimised configuration, and rework DEFINE_STATIC_CALL_RET0() to call it: c00d8120 <__SCT__perf_snapshot_branch_stack>: c00d8120: 48 00 00 14 b c00d8134 <__SCT__perf_snapshot_branch_stack+0x14> c00d8124: 3d 80 c0 0e lis r12,-16370 c00d8128: 81 8c 81 3c lwz r12,-32452(r12) c00d812c: 7d 89 03 a6 mtctr r12 c00d8130: 4e 80 04 20 bctr c00d8134: 38 60 00 00 li r3,0 c00d8138: 4e 80 00 20 blr c00d813c: 00 00 00 00 .long 0x0 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/1e0a61a88f52a460f62a58ffc2a5f847d1f7d9d8.1647253456.git.christophe.leroy@csgroup.eu |
||
|
Michael Ellerman
|
7f921a2d6c |
KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
We recently introduced a usage of kvmhv_on_pseries() in powerpc.c, which
causes a build error for ppc64_book3e_allmodconfig:
arch/powerpc/kvm/powerpc.c:716:8: error: implicit declaration of function ‘kvmhv_on_pseries’
716 | if (kvmhv_on_pseries()) {
| ^~~~~~~~~~~~~~~~
Fix it by moving kvmhv_on_pseries() into kvm_ppc.h so that the stub
version is available for book3e builds.
Fixes:
|
||
|
Linus Torvalds
|
88e6c02076 |
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro: "Assorted bits and pieces" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: drop needless assignment in aio_read() clean overflow checks in count_mounts() a bit seq_file: fix NULL pointer arithmetic warning uml/x86: use x86 load_unaligned_zeropad() asm/user.h: killed unused macros constify struct path argument of finish_automount()/do_add_mount() fs: Remove FIXME comment in generic_write_checks() |
||
|
Linus Torvalds
|
b8321ed4a4 |
Kbuild updates for v5.18
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
|
||
Srikar Dronamraju
|
e4ff77598a |
powerpc/numa: Handle partially initialized numa nodes
With commit |
||
Masahiro Yamada
|
bbc90bc1bd |
arch: syscalls: simplify uapi/kapi directory creation
$(shell ...) expands to empty. There is no need to assign it to _dummy. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Linus Torvalds
|
ee96dd9614 |
libnvdimm for 5.18
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYjvuTwAKCRDfioYZHlFs
Z4JbAQCViArRj/yxffDB4kg4FNlOgAQbxPblC07E06UX8Jj2DgD+NY2YJIucz0qb
87v0+CorJjtoy5dJ9vxAR8keojT3RQ0=
=oAwm
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
|
||
|
Linus Torvalds
|
1930a6e739 |
ptrace: Cleanups for v5.18
This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was
around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
making the semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where now anything left in tracehook.h is
some weird strange thing that is difficult to understand.
Eric W. Biederman (15):
ptrace: Move ptrace_report_syscall into ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Remove tracehook_signal_handler
task_work: Remove unnecessary include from posix_timers.h
task_work: Introduce task_work_pending
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
resume_user_mode: Move to resume_user_mode.h
tracehook: Remove tracehook.h
ptrace: Move setting/clearing ptrace_message into ptrace_stop
ptrace: Return the signal to continue with from ptrace_stop
Jann Horn (1):
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Yang Li (1):
ptrace: Remove duplicated include in ptrace.c
MAINTAINERS | 1 -
arch/Kconfig | 5 +-
arch/alpha/kernel/ptrace.c | 5 +-
arch/alpha/kernel/signal.c | 4 +-
arch/arc/kernel/ptrace.c | 5 +-
arch/arc/kernel/signal.c | 4 +-
arch/arm/kernel/ptrace.c | 12 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm64/kernel/ptrace.c | 14 +--
arch/arm64/kernel/signal.c | 4 +-
arch/csky/kernel/ptrace.c | 5 +-
arch/csky/kernel/signal.c | 4 +-
arch/h8300/kernel/ptrace.c | 5 +-
arch/h8300/kernel/signal.c | 4 +-
arch/hexagon/kernel/process.c | 4 +-
arch/hexagon/kernel/signal.c | 1 -
arch/hexagon/kernel/traps.c | 6 +-
arch/ia64/kernel/process.c | 4 +-
arch/ia64/kernel/ptrace.c | 6 +-
arch/ia64/kernel/signal.c | 1 -
arch/m68k/kernel/ptrace.c | 5 +-
arch/m68k/kernel/signal.c | 4 +-
arch/microblaze/kernel/ptrace.c | 5 +-
arch/microblaze/kernel/signal.c | 4 +-
arch/mips/kernel/ptrace.c | 5 +-
arch/mips/kernel/signal.c | 4 +-
arch/nds32/include/asm/syscall.h | 2 +-
arch/nds32/kernel/ptrace.c | 5 +-
arch/nds32/kernel/signal.c | 4 +-
arch/nios2/kernel/ptrace.c | 5 +-
arch/nios2/kernel/signal.c | 4 +-
arch/openrisc/kernel/ptrace.c | 5 +-
arch/openrisc/kernel/signal.c | 4 +-
arch/parisc/kernel/ptrace.c | 7 +-
arch/parisc/kernel/signal.c | 4 +-
arch/powerpc/kernel/ptrace/ptrace.c | 8 +-
arch/powerpc/kernel/signal.c | 4 +-
arch/riscv/kernel/ptrace.c | 5 +-
arch/riscv/kernel/signal.c | 4 +-
arch/s390/include/asm/entry-common.h | 1 -
arch/s390/kernel/ptrace.c | 1 -
arch/s390/kernel/signal.c | 5 +-
arch/sh/kernel/ptrace_32.c | 5 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sparc/kernel/ptrace_32.c | 5 +-
arch/sparc/kernel/ptrace_64.c | 5 +-
arch/sparc/kernel/signal32.c | 1 -
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 4 +-
arch/um/kernel/process.c | 4 +-
arch/um/kernel/ptrace.c | 5 +-
arch/x86/kernel/ptrace.c | 1 -
arch/x86/kernel/signal.c | 5 +-
arch/x86/mm/tlb.c | 1 +
arch/xtensa/kernel/ptrace.c | 5 +-
arch/xtensa/kernel/signal.c | 4 +-
block/blk-cgroup.c | 2 +-
fs/coredump.c | 1 -
fs/exec.c | 1 -
fs/io-wq.c | 6 +-
fs/io_uring.c | 11 +-
fs/proc/array.c | 1 -
fs/proc/base.c | 1 -
include/asm-generic/syscall.h | 2 +-
include/linux/entry-common.h | 47 +-------
include/linux/entry-kvm.h | 2 +-
include/linux/posix-timers.h | 1 -
include/linux/ptrace.h | 81 ++++++++++++-
include/linux/resume_user_mode.h | 64 ++++++++++
include/linux/sched/signal.h | 17 +++
include/linux/task_work.h | 5 +
include/linux/tracehook.h | 226 -----------------------------------
include/uapi/linux/ptrace.h | 2 +-
kernel/entry/common.c | 19 +--
kernel/entry/kvm.c | 9 +-
kernel/exit.c | 3 +-
kernel/livepatch/transition.c | 1 -
kernel/ptrace.c | 47 +++++---
kernel/seccomp.c | 1 -
kernel/signal.c | 62 +++++-----
kernel/task_work.c | 4 +-
kernel/time/posix-cpu-timers.c | 1 +
mm/memcontrol.c | 2 +-
security/apparmor/domain.c | 1 -
security/selinux/hooks.c | 1 -
85 files changed, 372 insertions(+), 495 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=uEro
-----END PGP SIGNATURE-----
Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
||
|
Christophe Leroy
|
af41d2866f |
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
Using conditional branches between two files is hasardous,
they may get linked too far from each other.
arch/powerpc/kvm/book3s_64_entry.o:(.text+0x3ec): relocation truncated
to fit: R_PPC64_REL14 (stub) against symbol `system_reset_common'
defined in .text section in arch/powerpc/kernel/head_64.o
Reorganise the code to use non conditional branches.
Fixes:
|
||
|
Michael Ellerman
|
1aa940d97f |
Merge branch 'topic/ppc-kvm' into next
Merge some more commits from our KVM topic branch. In particular this brings in some commits that depend on a new capability that was merged via the KVM tree for v5.18. |
||
Stephen Rothwell
|
f82da161ea |
powerpc: restore removed #endif
Fixes:
|
||
|
Linus Torvalds
|
7001052160 |
Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a
coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself. [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEv3OU3/byMaA0LqWJdkfhpEvA5LoFAmI/LI8VHHBldGVyekBp bmZyYWRlYWQub3JnAAoJEHZH4aRLwOS6ZnkP/2QCgQLTu6oRxv9O020CHwlaSEeD 1Hoy3loum5q5hAi1Ik3dR9p0H5u64c9qbrBVxaFoNKaLt5GKrtHaDSHNk2L/CFHX urpH65uvTLxbyZzcahkAahoJ71XU+m7PcrHLWMunw9sy10rExYVsUOlFyoyG6XCF BDCNZpdkC09ZM3vwlWGMZd5Pp+6HcZNPyoV9tpvWAS2l+WYFWAID7mflbpQ+tA8b y/hM6b3Ud0rT2ubuG1iUpopgNdwqQZ+HisMPGprh+wKZkYwS2l8pUTrz0MaBkFde go7fW16kFy2HQzGm6aIEBmfcg0palP/mFVaWP0zS62LwhJSWTn5G6xWBr3yxSsht 9gWCiI0oDZuTg698MedWmomdG2SK6yAuZuqmdKtLLoWfWgviPEi7TDFG/cKtZdAW ag8GM8T4iyYZzpCEcWO9GWbjo6TTGq30JBQefCBG47GjD0csv2ubXXx0Iey+jOwT x3E8wnv9dl8V9FSd/tMpTFmje8ges23yGrWtNpb5BRBuWTeuGiBPZED2BNyyIf+T dmewi2ufNMONgyNp27bDKopY81CPAQq9cVxqNm9Cg3eWPFnpOq2KGYEvisZ/rpEL EjMQeUBsy/C3AUFAleu1vwNnkwP/7JfKYpN00gnSyeQNZpqwxXBCKnHNgOMTXyJz beB/7u2KIUbKEkSN =jZfK -----END PGP SIGNATURE----- Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ... |
||
|
Linus Torvalds
|
148a650476 |
pci-v5.18-changes
-----BEGIN PGP SIGNATURE-----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=5Q9H
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Move the VGA arbiter from drivers/gpu to drivers/pci because it's
PCI-specific, not GPU-specific (Bjorn Helgaas)
- Select the default VGA device consistently whether it's enumerated
before or after VGA arbiter init, which fixes arches that enumerate
PCI devices late (Huacai Chen)
Resource management:
- Support BAR sizes up to 8TB (Dongdong Liu)
PCIe native device hotplug:
- Fix "Command Completed" tracking to avoid spurious timouts when
powering off empty slots (Liguang Zhang)
- Quirk Qualcomm devices that don't implement Command Completed
correctly, again to avoid spurious timeouts (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist
(Michael J. Ruhl)
APM X-Gene PCIe controller driver:
- Revert generic DT parsing changes that broke some machines in the
field (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Allow controller probe to succeed even when no devices currently
present to allow hot-add later (Fabio Estevam)
- Enable power management on i.MX6QP (Richard Zhu)
- Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no
device is connected (Richard Zhu)
Marvell Aardvark PCIe controller driver:
- Fix MSI and MSI-X support (Marek Behún, Pali Rohár)
- Add support for ERR and PME interrupts (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Add DT binding and support for "num-lanes" (Pali Rohár)
- Add support for INTx interrupts (Pali Rohár)
Microsoft Hyper-V host bridge driver:
- Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun
Feng)
Qualcomm PCIe controller driver:
- Add SM8450 DT binding and driver support (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Help the controller get to the L1 state since the hardware can't do
it on its own (Marek Vasut)
- Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek
Vasut)
SiFive FU740 PCIe controller driver:
- Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks)
- Force 2.5GT/s for initial device probe (Ben Dooks)
Socionext UniPhier Pro5 controller driver:
- Add NX1 DT binding and driver support (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Restore MSI configuration so MSI works after resume (Jisheng
Zhang)"
* tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
x86/PCI: Add #includes to asm/pci_x86.h
PCI: ibmphp: Remove unused assignments
PCI: cpqphp: Remove unused assignments
PCI: fu740: Remove unused assignments
PCI: kirin: Remove unused assignments
PCI: Remove unused assignments
PCI: Declare pci_filp_private only when HAVE_PCI_MMAP
PCI: Avoid broken MSI on SB600 USB devices
PCI: fu740: Force 2.5GT/s for initial device probe
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
PCI: imx6: Invoke the PHY exit function after PHY power off
PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
PCI: dwc: Restore MSI Receiver mask during resume
PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup
PCI/VGA: Replace full MIT license text with SPDX identifier
PCI/VGA: Use unsigned format string to print lock counts
PCI/VGA: Log bridge control messages when adding devices
...
|
||
|
Linus Torvalds
|
29c8c18363 |
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton: "This is the material which was staged after willystuff in linux-next. Subsystems affected by this patch series: mm (debug, selftests, pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise), and selftests" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits) selftests: kselftest framework: provide "finished" helper mm: madvise: MADV_DONTNEED_LOCKED mm: fix race between MADV_FREE reclaim and blkdev direct IO read mm: generalize ARCH_HAS_FILTER_PGPROT mm: unmap_mapping_range_tree() with i_mmap_rwsem shared mm: warn on deleting redirtied only if accounted mm/huge_memory: remove stale locking logic from __split_huge_pmd() mm/huge_memory: remove stale page_trans_huge_mapcount() mm/swapfile: remove stale reuse_swap_page() mm/khugepaged: remove reuse_swap_page() usage mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page() mm: streamline COW logic in do_swap_page() mm: slightly clarify KSM logic in do_swap_page() mm: optimize do_wp_page() for fresh pages in local LRU pagevecs mm: optimize do_wp_page() for exclusive pages in the swapcache mm/huge_memory: make is_transparent_hugepage() static userfaultfd/selftests: enable hugetlb remap and remove event testing selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test mm: enable MADV_DONTNEED for hugetlb mappings kasan: disable LOCKDEP when printing reports ... |
||
|
Linus Torvalds
|
1f1c153e40 |
powerpc updates for 5.18
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some toolchains. This allows
powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to: Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh Kumar K.V, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chen
Jingwen, Christophe JAILLET, Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel
Henrique Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu Hua, Haren
Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason Wang, Jeremy Kerr, Joachim
Wiberg, Jordan Niethe, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan
Srinivasan, Mamatha Inamdar, Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal
Suchanek, Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nour-eddine
Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy Dunlap, Ritesh Harjani, Rohan
McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain,
Thierry Reding, Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean, Wedson
Almeida Filho, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=8r2c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
|
||
Anshuman Khandual
|
283fd6fe05 |
mm/migration: add trace events for THP migrations
Patch series "mm/migration: Add trace events", v3. This adds trace events for all migration scenarios including base page, THP and HugeTLB. This patch (of 3): This adds two trace events for PMD based THP migration without split. These events closely follow the implementation details like setting and removing of PMD migration entries, which are essential operations for THP migration. This moves CREATE_TRACE_POINTS into generic THP from powerpc for these new trace events to be available on other platforms as well. Link: https://lkml.kernel.org/r/1643368182-9588-1-git-send-email-anshuman.khandual@arm.com Link: https://lkml.kernel.org/r/1643368182-9588-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
|
Linus Torvalds
|
1ebdbeb03e |
ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical sections
that last too long for very large guests backed by 4 KiB SPTEs.
- Zap invalid and defunct roots asynchronously via concurrency-managed
work queue.
- Allowing yielding when zapping TDP MMU roots in response to the root's
last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the paging
structure now holds RCU as a proxy for all vCPUs running in the guest,
i.e. to prolongs the grace period on their behalf. It then kicks the
the vCPUs out of guest mode before doing rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that
need memcg accounting
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmI4fdwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMq8gf/WoeVHtw2QlL5Mmz6McvRRmPAYPLV
wLUIFNrRqRvd8Tw4kivzZoh/xTpwmnojv0YdK5SjKAiMjgv094YI1LrNp1JSPvmL
pitocMkA10RSJNWHeEMg9cMSKH0rKiqeYl6S1e2XsdB+UZZ2BINOCVtvglmjTAvJ
dFBdKdBkqjAUZbdXAGIvz4JEEER3N/LkFDKGaUGX+0QIQOzGBPIyLTxynxIDG6mt
RViCCFyXdy5NkVp5hZFm96vQ2qAlWL9B9+iKruQN++82+oqWbeTdSqPhdwF7GyFz
BfOv3gobQ2c4ef/aMLO5LswZ9joI1t/4kQbbAn6dNybpOAz/NXfDnbNefg==
=keox
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
|
||
|
Linus Torvalds
|
194dfe88d6 |
asm-generic updates for 5.18
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
|
||
|
Linus Torvalds
|
9c4b86ebf5 |
fbdev fixes and updates for kernel v5.18-rc1
Lots of small fixes and code cleanups across most of the fbdev drivers. This includes conversions to use helper functions, const conversions, spelling fixes, help text updates, adding return value checks, small build fixes, and much more. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYjogFQAKCRD3ErUQojoP X3Y7AQD/0Qd0zm6klv4EPeyLXOYzs6uXdyHiJGyCBABP3WxKZQD+J4yNXjd1g50A iGbsawaUpFMcaXTETr0NcrtRkc5jCgY= =HHa3 -----END PGP SIGNATURE----- Merge tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: "Lots of small fixes and code cleanups across most of the fbdev drivers. This includes conversions to use helper functions, const conversions, spelling fixes, help text updates, adding return value checks, small build fixes, and much more" * tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (59 commits) video: fbdev: kyro: make read-only array ODValues static const video: fbdev: offb: fix warning comparing pointer to 0 video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of video: fbdev: sm712fb: Fix crash in smtcfb_write() video: fbdev: s3c-fb: fix platform_get_irq.cocci warning video: fbdev: sm712fb: Fix crash in smtcfb_read() video: fbdev: via: check the return value of kstrdup() video: fbdev: au1100fb: Spelling s/palette/palette/ video: fbdev: atari: Atari 2 bpp (STe) palette bugfix video: fbdev: atari: Remove unused atafb_setcolreg() video: fbdev: atari: Convert to standard round_up() helper video: fbdev: atari: Fix TT High video mode video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf() video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf() video: fbdev: omapfb: Use sysfs_emit() instead of snprintf() video: fbdev: s3c-fb: Use platform_get_irq() to get the interrupt video: fbdev: Fix wrong file path for pvr2fb.c in Kconfig help text video: fbdev: pxa3xx-gcu: Remove unnecessary print function dev_err() video: fbdev: pxa168fb: Remove unnecessary print function dev_err() ... |
||
Kajol Jain
|
d0007eb15c |
powerpc/papr_scm: Fix build failure when
The following build failure occurs when CONFIG_PERF_EVENTS is not set
as generic pmu functions are not visible in that scenario.
arch/powerpc/platforms/pseries/papr_scm.c:372:35: error: ‘struct perf_event’ has no member named ‘attr’
p->nvdimm_events_map[event->attr.config],
^~
In file included from ./include/linux/list.h:5,
from ./include/linux/kobject.h:19,
from ./include/linux/of.h:17,
from arch/powerpc/platforms/pseries/papr_scm.c:5:
arch/powerpc/platforms/pseries/papr_scm.c: In function ‘papr_scm_pmu_event_init’:
arch/powerpc/platforms/pseries/papr_scm.c:389:49: error: ‘struct perf_event’ has no member named ‘pmu’
struct nvdimm_pmu *nd_pmu = to_nvdimm_pmu(event->pmu);
^~
./include/linux/container_of.h:18:26: note: in definition of macro ‘container_of’
void *__mptr = (void *)(ptr); \
^~~
arch/powerpc/platforms/pseries/papr_scm.c:389:30: note: in expansion of macro ‘to_nvdimm_pmu’
struct nvdimm_pmu *nd_pmu = to_nvdimm_pmu(event->pmu);
^~~~~~~~~~~~~
In file included from ./include/linux/bits.h:22,
from ./include/linux/bitops.h:6,
from ./include/linux/of.h:15,
from arch/powerpc/platforms/pseries/papr_scm.c:5:
Fix the build issue by adding check for CONFIG_PERF_EVENTS config option
and also add stub function for papr_scm_pmu_register to handle
the CONFIG_PERF_EVENTS=n case. Also move the position of macro
"to_nvdimm_pmu" inorder to merge it in CONFIG_PERF_EVENTS=y block.
based on libnvdimm-for-next tree)
Fixes:
|
||
|
Linus Torvalds
|
9030fb0bb9 |
Folio changes for 5.18
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
||
|
Linus Torvalds
|
3bf03b9a08 |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
- A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs
- Most the MM patches which precede the patches in Willy's tree: kasan,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb,
userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp,
cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap,
zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (227 commits)
mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release()
Docs/ABI/testing: add DAMON sysfs interface ABI document
Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface
selftests/damon: add a test for DAMON sysfs interface
mm/damon/sysfs: support DAMOS stats
mm/damon/sysfs: support DAMOS watermarks
mm/damon/sysfs: support schemes prioritization
mm/damon/sysfs: support DAMOS quotas
mm/damon/sysfs: support DAMON-based Operation Schemes
mm/damon/sysfs: support the physical address space monitoring
mm/damon/sysfs: link DAMON for virtual address spaces monitoring
mm/damon: implement a minimal stub for sysfs-based DAMON interface
mm/damon/core: add number of each enum type values
mm/damon/core: allow non-exclusive DAMON start/stop
Docs/damon: update outdated term 'regions update interval'
Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling
Docs/vm/damon: call low level monitoring primitives the operations
mm/damon: remove unnecessary CONFIG_DAMON option
mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}()
mm/damon/dbgfs-test: fix is_target_id() change
...
|
||
David Hildenbrand
|
2848a28b0a |
drivers/base/node: consolidate node device subsystem initialization in node_dev_init()
... and call node_dev_init() after memory_dev_init() from driver_init(), so before any of the existing arch/subsys calls. All online nodes should be known at that point: early during boot, arch code determines node and zone ranges and sets the relevant nodes online; usually this happens in setup_arch(). This is in line with memory_dev_init(), which initializes the memory device subsystem and creates all memory block devices. Similar to memory_dev_init(), panic() if anything goes wrong, we don't want to continue with such basic initialization errors. The important part is that node_dev_init() gets called after memory_dev_init() and after cpu_dev_init(), but before any of the relevant archs call register_cpu() to register the new cpu device under the node device. The latter should be the case for the current users of topology_init(). Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Anatoly Pugachev <matorola@gmail.com> (sparc64) Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Hari Bathini
|
ee97347fe0 |
powerpc/fadump: opt out from freeing pages on cma activation failure
With commit |
||
|
David Hildenbrand
|
e16faf2678 |
cma: factor out minimum alignment requirement
Patch series "mm: enforce pageblock_order < MAX_ORDER". Having pageblock_order >= MAX_ORDER seems to be able to happen in corner cases and some parts of the kernel are not prepared for it. For example, Aneesh has shown [1] that such kernels can be compiled on ppc64 with 64k base pages by setting FORCE_MAX_ZONEORDER=8, which will run into a WARN_ON_ONCE(order >= MAX_ORDER) in comapction code right during boot. We can get pageblock_order >= MAX_ORDER when the default hugetlb size is bigger than the maximum allocation granularity of the buddy, in which case we are no longer talking about huge pages but instead gigantic pages. Having pageblock_order >= MAX_ORDER can only make alloc_contig_range() of such gigantic pages more likely to succeed. Reliable use of gigantic pages either requires boot time allcoation or CMA, no need to overcomplicate some places in the kernel to optimize for corner cases that are broken in other areas of the kernel. This patch (of 2): Let's enforce pageblock_order < MAX_ORDER and simplify. Especially patch #1 can be regarded a cleanup before: [PATCH v5 0/6] Use pageblock_order for cma and alloc_contig_range alignment. [2] [1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com [2] https://lkml.kernel.org/r/20220211164135.1803616-1-zi.yan@sent.com Link: https://lkml.kernel.org/r/20220214174132.219303-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: John Garry via iommu <iommu@lists.linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Anshuman Khandual
|
16785bd774 |
mm: merge pte_mkhuge() call into arch_make_huge_pte()
Each call into pte_mkhuge() is invariably followed by arch_make_huge_pte(). Instead arch_make_huge_pte() can accommodate pte_mkhuge() at the beginning. This updates generic fallback stub for arch_make_huge_pte() and available platforms definitions. This makes huge pte creation much cleaner and easier to follow. Link: https://lkml.kernel.org/r/1643860669-26307-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
14705fda8f |
New features:
- NFSv3 support in NFSD is now always built - Added NFSD support for the NFSv4 birth-time file attribute - Added support for storing and displaying sockaddrs in trace points - NFSD now recognizes RPC_AUTH_TLS probes Performance improvements: - Optimized the svc transport enqueuing mechanism - Added micro-optimizations for the duplicate reply cache Notable bug fixes: - Allocation of the NFSD file cache hash table is more reliable -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmI3XNkACgkQM2qzM29m f5dNERAAqJ/nzfVp2H5BKLszJ7p/s13wFqbW719Rzymzl6/tUUHOqIsVdBsJsa/b BdZQLLDwa6ZB5zOAnC6FosRKYu4lwixOOf94pC6a9ZDD/glYVKF8mZG+RZXPAy16 g3JUOi/bcyHXv0ZUhbv7DqW+HHM+owPP4vlNJ9ChiiLr/Xdp8NBKj+4Qtn/wcAo+ Xuvx7fU/5Mbemh+dd5mWker4afHvpt9V6U6s04m5LiTPPnHVnxmeyekJGUCOY0QO cm/6SPNDqyn/VEfM/SRxEnLE9QcHRhZo/4PKRGF4wYolcviIogbILE1M7Ig/r/Gv 6Du2kcRAhyZ3zgWnu799Ivn3Q6IrVjxZwqmsi7YHURTwYKyZtxYsUk0MCBcpnxrE WyTS2onpElbMop3viKCnQdpIetbsHnUNg3udUV6ugbdCbnZuhUw5B/d6x0o8ZWDE C0f+jnX+GnBstn0vkcj2H0+VQTd5hUJtXMrooI42ODJoboQRZcmePwoXjqCmw3sy PXTxLZC/5+4zNHGUuz4Pq4V7FKr4nHhDzaW4ZDO3mILx4ahceotulY1B/yoBUu8o /LAhu2kJ6nFQkmpzdrGzPeOstgJYHm9CaitRvMzg+NJxEAJdebypdQDbX5iNpgfW MDXH4n8eIqroTlQ/mQYEV0EbC7BaTqSCL6rQdcrcFUPu9n4Fcno= =5nac -----END PGP SIGNATURE----- Merge tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd updates from Chuck Lever: "New features: - NFSv3 support in NFSD is now always built - Added NFSD support for the NFSv4 birth-time file attribute - Added support for storing and displaying sockaddrs in trace points - NFSD now recognizes RPC_AUTH_TLS probes Performance improvements: - Optimized the svc transport enqueuing mechanism - Added micro-optimizations for the duplicate reply cache Notable bug fixes: - Allocation of the NFSD file cache hash table is more reliable" * tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (30 commits) nfsd: fix using the correct variable for sizeof() nfsd: use correct format characters NFSD: prevent integer overflow on 32 bit systems NFSD: prevent underflow in nfssvc_decode_writeargs() fs/lock: documentation cleanup. Replace inode->i_lock with flc_lock. NFSD: Fix nfsd_breaker_owns_lease() return values NFSD: Clean up _lm_ operation names arch: Remove references to CONFIG_NFSD_V3 in the default configs NFSD: Remove CONFIG_NFSD_V3 nfsd: more robust allocation failure handling in nfsd_file_cache_init SUNRPC: Teach server to recognize RPC_AUTH_TLS NFSD: Move svc_serv_ops::svo_function into struct svc_serv NFSD: Remove svc_serv_ops::svo_module SUNRPC: Remove svc_shutdown_net() SUNRPC: Rename svc_close_xprt() SUNRPC: Rename svc_create_xprt() SUNRPC: Remove svo_shutdown method SUNRPC: Merge svc_do_enqueue_xprt() into svc_enqueue_xprt() SUNRPC: Remove the .svo_enqueue_xprt method SUNRPC: Record endpoint information in trace log ... |
||
|
Linus Torvalds
|
2142b7f0c6 |
hardening updates for v5.18-rc1
- Add arm64 Shadow Call Stack support for GCC 12 (Dan Li) - Avoid memset with stack offset randomization under Clang (Marco Elver) - Clean up stackleak plugin to play nice with .noinstr (Kees Cook) - Check stack depth for greater usercopy hardening coverage (Kees Cook) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmI4kXMWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhBoD/wJFr0s13Cvsbibuk7PLAPJlQe9 QBMolrrS9+JNoqdIMiILrmthCPnDBkBNrU/YvfkIyGQOO2RGxrtZVzLhyHKCDg6u iIkNG9S5D12ucEdqqLWdZxyBZcQuR6Rf//lGvtx8ps+jYy8fDwRekurJIb3kWl5u qB0O0PFd+RjGgvtm+Fh8h0FiBMxbKfPXI+s7W2rCfcwe+w5Z24YD1eoCHmnQJYcu Mnuk7cHsx2TFms4UqUK1Z/0EBpCKNEEX4s0z/nrfu8dRTPvLqLgbGpcmXTkik9PN BucIxgdRqqYbTyGvhsDhpEUVfmFcQzdPmuMnnnUc8BiXy9EqGqSfjMEzutuf+RS7 0i4LWoDW2LYMUixqDLAMdLpwdC2Ca7hP62kE4vNVqW3jBty+jhPBVO6ddhHO14nd q6m+CQz0SVTIyrLI4N+TNg/EIj2DpBpAhs49QWDOL/ZqP0ewYk8Ef8pXKgJo2jJC aAs+18pdpoVCEs1fztzjuWZT77iTmziYhb2BOMnT4yBcAdifi7eW6l0pYsgfxoJ/ WC/MmTWt08/IHBk09d8GbFdoP8byDUgzmzUUoskJJH2JA7475xM6qhI2J627Lpth baEv3UT8JWBBX+koU2wxhxKgscIvbNjJjpEGNt2YuBBeQ4lrlijsFzQjmu62gZDL LG0XOVV97/1V9uJ2CA== =yaWZ -----END PGP SIGNATURE----- Merge tag 'hardening-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening updates from Kees Cook: - Add arm64 Shadow Call Stack support for GCC 12 (Dan Li) - Avoid memset with stack offset randomization under Clang (Marco Elver) - Clean up stackleak plugin to play nice with .noinstr (Kees Cook) - Check stack depth for greater usercopy hardening coverage (Kees Cook) * tag 'hardening-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: Add gcc Shadow Call Stack support m68k: Implement "current_stack_pointer" xtensa: Implement "current_stack_pointer" usercopy: Check valid lifetime via stack depth stack: Constrain and fix stack offset randomization with Clang builds stack: Introduce CONFIG_RANDOMIZE_KSTACK_OFFSET gcc-plugins/stackleak: Ignore .noinstr.text and .entry.text gcc-plugins/stackleak: Exactly match strings instead of prefixes gcc-plugins/stackleak: Provide verbose mode |
||
|
Linus Torvalds
|
93e220a62d |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - hwrng core now credits for low-quality RNG devices. Algorithms: - Optimisations for neon aes on arm/arm64. - Add accelerated crc32_be on arm64. - Add ffdheXYZ(dh) templates. - Disallow hmac keys < 112 bits in FIPS mode. - Add AVX assembly implementation for sm3 on x86. Drivers: - Add missing local_bh_disable calls for crypto_engine callback. - Ensure BH is disabled in crypto_engine callback path. - Fix zero length DMA mappings in ccree. - Add synchronization between mailbox accesses in octeontx2. - Add Xilinx SHA3 driver. - Add support for the TDES IP available on sama7g5 SoC in atmel" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits) crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list crypto: dh - Remove the unused function dh_safe_prime_dh_alg() hwrng: nomadik - Change clk_disable to clk_disable_unprepare crypto: arm64 - cleanup comments crypto: qat - fix initialization of pfvf rts_map_msg structures crypto: qat - fix initialization of pfvf cap_msg structures crypto: qat - remove unneeded assignment crypto: qat - disable registration of algorithms crypto: hisilicon/qm - fix memset during queues clearing crypto: xilinx: prevent probing on non-xilinx hardware crypto: marvell/octeontx - Use swap() instead of open coding it crypto: ccree - Fix use after free in cc_cipher_exit() crypto: ccp - ccp_dmaengine_unregister release dma channels crypto: octeontx2 - fix missing unlock hwrng: cavium - fix NULL but dereferenced coccicheck error crypto: cavium/nitrox - don't cast parameter in bit operations crypto: vmx - add missing dependencies MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver crypto: xilinx - Add Xilinx SHA3 driver ... |
||
Matthew Wilcox (Oracle)
|
9e996c2115 |
powerpc: Add pmd_pfn()
This is straightforward for everything except nohash64 where we indirect through pmd_page(). There must be a better way to do this. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
||
|
Matthew Wilcox (Oracle)
|
d1d8a3b4d0 |
mm: Turn isolate_lru_page() into folio_isolate_lru()
Add isolate_lru_page() as a wrapper around isolate_lru_folio(). TestClearPageLRU() would have always failed on a tail page, so returning -EBUSY is the same behaviour. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> |
||
|
Michael Ellerman
|
fe2640bd7a |
powerpc/pseries: Fix use after free in remove_phb_dynamic()
In remove_phb_dynamic() we use &phb->io_resource, after we've called
device_unregister(&host_bridge->dev). But the unregister may have freed
phb, because pcibios_free_controller_deferred() is the release function
for the host_bridge.
If there are no outstanding references when we call device_unregister()
then phb will be freed out from under us.
This has gone mainly unnoticed, but with slub_debug and page_poison
enabled it can lead to a crash:
PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr"
#0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc
#1 [c0000000e4f075d0] oops_end at c000000000029608
#2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4
#3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8
#4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30
Data SLB Access [380] exception frame:
R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100
R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9
R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff
R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000
R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000
R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003
R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005
R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0
R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8
R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800
R30: c00000004d1d2400 R31: c00000004d1d2540
NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474
CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003
CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3
DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2
[NIP : release_resource+56]
[LR : release_resource+48]
#5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable)
#6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648
#7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io]
#8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io]
#9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c
#10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504
#11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868
#12 [c0000000e4f07c70] new_sync_write at c00000000054339c
#13 [c0000000e4f07d10] vfs_write at c000000000546624
#14 [c0000000e4f07d60] ksys_write at c0000000005469f4
#15 [c0000000e4f07db0] system_call_exception at c000000000030840
#16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168
To avoid it, we can take a reference to the host_bridge->dev until we're
done using phb. Then when we drop the reference the phb will be freed.
Fixes:
|
||
Jakub Kicinski
|
e243f39685 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Nicholas Piggin
|
35de589cb8 |
powerpc/time: improve decrementer clockevent processing
The stop/shutdown op should not use decrementer_set_next_event because that sets decrementers_next_tb to now + decrementer_max, which means a decrementer interrupt that occurs after that time will call the clockevent event handler unexpectedly. Set next_tb to ~0 here to prevent any clock event call. Init all clockevents to stopped. Then the decrementer clockevent device always has event_handler set and applicable because we know the clock event device was not stopped. So make this call unconditional to show that it is always called. next_tb need not be set to ~0 before the event handler is called because it will stop the clockevent device if there is no other timer. Finally, the timer broadcast interrupt should not modify next_tb because it is not involved with the local decrementer clockevent on this CPU. This doesn't fix a known bug, just tidies the code. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220124143930.3923442-3-npiggin@gmail.com |
||
|
Nicholas Piggin
|
cf74ff52e3 |
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
If the next host timer is beyond decrementer range, timer_rearm_host_dec
will leave decrementer not programmed. This will not cause a problem for
the host it will just set the decrementer correctly when the decrementer
interrupt hits, it seems safer not to leave the next host decrementer
interrupt timing able to be influenced by a guest.
This code is only used in the P9 KVM paths so it's unlikely to be hit
practically unless large decrementer is force disabled in the host.
Fixes:
|
||
|
Nicholas Piggin
|
9d71165d39 |
powerpc/tm: Fix more userspace r13 corruption
Commit |
||
Randy Dunlap
|
d64e3eab75 |
powerpc/xive: fix return value of __setup handler
__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from xive_off() and xive_store_eoi_cmdline(). Fixes: |
||
Peter Zijlstra
|
cc66bb9145 |
x86/ibt,kprobes: Cure sym+0 equals fentry woes
In order to allow kprobes to skip the ENDBR instructions at sym+0 for X86_KERNEL_IBT builds, change _kprobe_addr() to take an architecture callback to inspect the function at hand and modify the offset if needed. This streamlines the existing interface to cover more cases and require less hooks. Once PowerPC gets fully converted there will only be the one arch hook. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154318.405947704@infradead.org |
||
|
Peter Zijlstra
|
d15cb3dab1 |
x86/livepatch: Validate __fentry__ location
Currently livepatch assumes __fentry__ lives at func+0, which is most likely untrue with IBT on. Instead make it use ftrace_location() by default which both validates and finds the actual ip if there is any in the same symbol. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154318.285971256@infradead.org |
||
Chuck Lever
|
f3e4080edd |
arch: Remove references to CONFIG_NFSD_V3 in the default configs
CONFIG_NFSD_V3 has been removed. NFSD support for NFSv3 can no longer be disabled. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |