Commit Graph

3618 Commits

Author SHA1 Message Date
Bjorn Helgaas
ac93ac7403 PCI: Don't check resource_size() in pci_bus_alloc_resource()
Paul reported that after f75b99d5a7 ("PCI: Enforce bus address limits in
resource allocation") on a 32-bit kernel (CONFIG_PHYS_ADDR_T_64BIT not
set), intel-gtt complained "can't ioremap flush page - no chipset
flushing".  In addition, other PCI resource allocations, e.g., for bridge
windows, failed.

This happens because we incorrectly skip bus resources of
[mem 0x00000000-0xffffffff] because we think they are of size zero.
When resource_size_t is 32 bits wide, resource_size() on
[mem 0x00000000-0xffffffff] returns 0 because (r->end - r->start + 1)
overflows.

Therefore, we can't use "resource_size() == 0" to decide that allocation
from this resource will fail.  allocate_resource() should fail anyway if it
can't satisfy the address constraints, so we should just depend on that.

A [mem 0x00000000-0xffffffff] bus resource is obviously not really valid,
but we do fall back to it as a default when we don't have information about
host bridge apertures.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=71611
Fixes: f75b99d5a7 PCI: Enforce bus address limits in resource allocation
Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-03-12 11:19:20 -06:00
Bjorn Helgaas
3cdeb713dc PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
Andreas reported that after 1f42db786b ("PCI: Enable INTx if BIOS left
them disabled"), pciehp surprise removal stopped working.

This happens because pci_reenable_device() on the hotplug bridge (used in
the pciehp_configure_device() path) clears the Interrupt Disable bit, which
apparently breaks the bridge's MSI hotplug event reporting.

Previously we cleared the Interrupt Disable bit in do_pci_enable_device(),
which is used by both pci_enable_device() and pci_reenable_device().  But
we use pci_reenable_device() after the driver may have enabled MSI or
MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X.

This patch clears Interrupt Disable only when MSI/MSI-X has not been
enabled.

Fixes: 1f42db786b PCI: Enable INTx if BIOS left them disabled
Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691
Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-12 11:19:18 -06:00
Linus Torvalds
d158fc7f36 PCI updates for v3.14:
MSI
     - Fix AHCI single-MSI fallback (Alexander Gordeev)
     - Fix populate_msi_sysfs() error paths (Greg Kroah-Hartman)
     - Fix htmldocs problem (Masanari Iida)
     - Add pci_enable_msi_exact() and pci_enable_msix_exact() (Alexander Gordeev)
     - Update documentation (Alexander Gordeev)
 
   Miscellaneous
     - mvebu: expose device ID & revision via lspci (Andrew Lunn)
     - Enable INTx if the BIOS left them disabled (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTBkj5AAoJEFmIoMA60/r8aiAQAIWQnZ7UhXBqMAXDR8nJuTbk
 b2l4EpNtrGPKy27ZogwDV7ACE7BcBc8vQWhsuMbaxyYTUh4Amr19CysjyBqmoLe9
 4eMuGlItkXCbtEw8wquiSz8rtUHH90yTwXk3XMQ0SkscMuAp+QSUb48a3uBSPMX/
 gf29IeV8CJjqfLnvtCYkp9jgVuph9vpw+g+DTaLPGA23KS8QJKvmJ95R15fhfcGZ
 B4fbJG8TT8LLLD4LDeZOSqbz2n4rE8Xaif1locLAkQtPhiSe65vZYP5IFwlH/t4T
 Rzqtkuy2pbybfMk2JVDXzXQgIbCH0h3fEYRZM7ydhU3dndb1E8oUAYf1CbG1GoLv
 36feVn7YWs3VQhs+IpoqJivtgmQKOmFgtGByPOgP47SWXssmyBz2DZCap6WPVGGb
 KCJNshSGtpNA3ge34jj8Y5wKN2Y+jGoBvLPObJd80Rwwmx00Nn33jn4dYX9JkPlB
 kq4I9+y8CmMuADB+St3kHklAw0qFeK7pj2iMRnpfdEbau4el16ch8S9rEBltOj/2
 wMejSViUH1RsdpJMMHads3pR+oAjFxxc8x1fnp4roIr2SkvZhCmcZwM6GJJhMJpi
 RM/B4RnK4dMuE6vGX5jsDQFy7xKoE6Wfop/cXK6HbifX+kiZo90PD8vbNthFJ/Wy
 2B0AN2cvL5dCKvoX2gqJ
 =CTv7
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "The most interesting thing here is the change to enable INTx (by
  clearing PCI_COMMAND_INTX_DISABLE) if the BIOS left INTx disabled.
  Apparently the Baytrail BIOS does this, which means EHCI doesn't work.

  Also, fix an AHCI MSI regression and other issues with the recent MSI
  changes.  This also adds pci_enable_msi_exact() and
  pci_enable_msix_exact(), which aren't regression fixes, but will keep
  us from touching drivers twice (once to stop using the deprecated
  pci_enable_msi(), etc., and again to use the *_exact() variants).

  There's also a minor MVEBU fix.

  Summary:

  MSI:
    - Fix AHCI single-MSI fallback (Alexander Gordeev)
    - Fix populate_msi_sysfs() error paths (Greg Kroah-Hartman)
    - Fix htmldocs problem (Masanari Iida)
    - Add pci_enable_msi_exact() and pci_enable_msix_exact() (Alexander Gordeev)
    - Update documentation (Alexander Gordeev)

  Miscellaneous:
    - mvebu: expose device ID & revision via lspci (Andrew Lunn)
    - Enable INTx if the BIOS left them disabled (Bjorn Helgaas)"

* tag 'pci-v3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  ahci: Fix broken fallback to single MSI mode
  PCI: Enable INTx if BIOS left them disabled
  PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact()
  PCI/MSI: Fix cut-and-paste errors in documentation
  PCI/MSI: Add pci_enable_msi() documentation back
  PCI/MSI: Fix pci_msix_vec_count() htmldocs failure
  PCI/MSI: Fix leak of msi_attrs
  PCI/MSI: Check kmalloc() return value, fix leak of name
  PCI: mvebu: Use Device ID and revision from underlying endpoint
2014-02-20 12:46:24 -08:00
Bjorn Helgaas
1f42db786b PCI: Enable INTx if BIOS left them disabled
Some firmware leaves the Interrupt Disable bit set even if the device uses
INTx interrupts.  Clear Interrupt Disable so we get those interrupts.

Based on the report mentioned below, if the user selects the "EHCI only"
option in the Intel Baytrail BIOS, the EHCI device is handed off to the OS
with the PCI_COMMAND_INTX_DISABLE bit set.

Link: http://lkml.kernel.org/r/20140114181721.GC12126@xanatos
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70601
Reported-by: Chris Cheng <chris.cheng@atrustcorp.com>
Reported-and-tested-by: Jamie Chen <jamie.chen@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-02-14 13:48:16 -07:00
Masanari Iida
75ce2d53ce PCI/MSI: Fix pci_msix_vec_count() htmldocs failure
An empty line in msi.c caused "make htmldocs" failure:

  Warning(/home/iida/Repo/linux-next//drivers/pci/msi.c:962): bad line:

Fixes: ff1aa430a2 ("PCI/MSI: Add pci_msix_vec_count()")
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-13 10:47:44 -07:00
Greg Kroah-Hartman
2923775647 PCI/MSI: Fix leak of msi_attrs
Coverity reported that I forgot to clean up some allocated memory on the
error path in populate_msi_sysfs(), so this patch fixes that.

Thanks to Dave Jones for pointing out where the error was, I obviously
can't read code this morning...

Found by Coverity (CID 1163317).

Fixes: 1c51b50c29 ("PCI/MSI: Export MSI mode using attributes, not kobjects")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Dave Jones <davej@redhat.com>
2014-02-13 10:47:35 -07:00
Greg Kroah-Hartman
86bb4f697a PCI/MSI: Check kmalloc() return value, fix leak of name
Coverity reported that I forgot to check the return value of kmalloc() when
creating the MSI attribute name, so fix that up and properly free it if
there is an error when allocating the msi_dev_attr variable.

Found by Coverity (CID 1163315 and 1163316).

Fixes: 1c51b50c29 ("PCI/MSI: Export MSI mode using attributes, not kobjects")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-13 10:47:20 -07:00
Andrew Lunn
322a8e9184 PCI: mvebu: Use Device ID and revision from underlying endpoint
Marvell SoCs place the SoC number into the PCIe endpoint device ID.  The
SoC stepping is placed into the PCIe revision. The old plat-orion PCIe
driver allowed this information to be seen in user space with a simple
lspci command.

The new driver places a virtual PCI-PCI bridge on top of these endpoints.
It has its own hard coded PCI device ID. Thus it is no longer possible to
see what the SoC is using lspci.

When initializing the PCI-PCI bridge, set its device ID and revision from
the underlying endpoint, thus restoring this functionality.  Debian would
like to use this in order to aid installing the correct DTB file.

Fixes: 45361a4fe4 ("pci: PCIe driver for Marvell Armada 370/XP systems")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org	# v3.11+
2014-02-12 14:05:54 -07:00
Mika Westerberg
7282059489 ACPI / hotplug / PCI: Relax the checking of _STA return values
The ACPI specification (ACPI 5.0A, Section 6.3.7) says:

 _STA may return bit 0 clear (not present) with bit 3 set (device is
 functional). This case is used to indicate a valid device for which
 no device driver should be loaded (for example, a bridge device.)
 Children of this device may be present and valid. OSPM should
 continue enumeration below a device whose _STA returns this bit
 combination.

Evidently, some BIOSes follow that and return 0x0A from _STA, which
causes problems to happen when they trigger bus check or device check
notifications for those devices too.  Namely, ACPIPHP thinks that they
are gone and may drop them, for example, if such a notification is
triggered during a resume from system suspend.

To fix that, modify ACPICA to regard devies as present and
functioning if _STA returns both the ACPI_STA_DEVICE_ENABLED
and ACPI_STA_DEVICE_FUNCTIONING bits set for them.

Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
[rjw: Subject and changelog, minor code modifications]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-12 12:45:57 +01:00
Rafael J. Wysocki
af9d8adc6b ACPI / hotplug / PCI: Fix bridge removal race vs dock events
If a PCI bridge with an ACPIPHP context attached is removed via
sysfs, the code path executed as a result is the following:

pci_stop_and_remove_bus_device_locked
 pci_remove_bus
  pcibios_remove_bus
   acpi_pci_remove_bus
    acpiphp_remove_slots
     cleanup_bridge
      unregister_hotplug_dock_device (drops dock references to the bridge)
     put_bridge
      free_bridge
       acpiphp_put_context (for each child, under context lock)
        kfree (context)

Now, if a dock event affecting one of the bridge's child devices
occurs (roughly at the same time), it will lead to the following code
path:

acpi_dock_deferred_cb
 dock_notify
  handle_eject_request
   hot_remove_dock_devices
    dock_hotplug_event
     hotplug_event (dereferences context)

That may lead to a kernel crash in hotplug_event() if it is executed
after the last kfree() in the bridge removal code path.

To prevent that from happening, add a wrapper around hotplug_event()
called dock_event() and point the .handler pointer in acpiphp_dock_ops
to it.  Make that wrapper retrieve the device's ACPIPHP context using
acpiphp_get_context() (instead of taking it from the data argument)
under acpiphp_context_lock and check if the parent bridge's
is_going_away flag is set.  If that flag is set, it will return
immediately and if it is not set it will grab a reference to the
device's parent bridge before executing hotplug_event().

Then, in the above scenario, the reference to the parent bridge
held by dock_event() will prevent free_bridge() from being executed
for it until hotplug_event() returns.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-03 22:30:15 +01:00
Rafael J. Wysocki
1b360f44d0 ACPI / hotplug / PCI: Fix bridge removal race in handle_hotplug_event()
If a PCI bridge with an ACPIPHP context attached is removed via
sysfs, the code path executed as a result is the following:

pci_stop_and_remove_bus_device_locked
 pci_remove_bus
  pcibios_remove_bus
   acpi_pci_remove_bus
    acpiphp_remove_slots
     cleanup_bridge
     put_bridge
      free_bridge
       acpiphp_put_context (for each child, under context lock)
        kfree (child context)

Now, if a hotplug notify is dispatched for one of the bridge's
children and the timing is such that handle_hotplug_event() for
that notify is executed while free_bridge() above is running,
the get_bridge(context->func.parent) in handle_hotplug_event()
will not really help, because it is too late to prevent the bridge
from going away and the child's context may be freed before
hotplug_event_work() scheduled from handle_hotplug_event()
dereferences the pointer to it passed via the data argument.
That will cause a kernel crash to happpen in hotplug_event_work().

To prevent that from happening, make handle_hotplug_event()
check the is_going_away flag of the function's parent bridge
(under acpiphp_context_lock) and bail out if it's set.  Also,
make cleanup_bridge() set the bridge's is_going_away flag under
acpiphp_context_lock so that it cannot be changed between the
check and the subsequent get_bridge(context->func.parent) in
handle_hotplug_event().

Then, in the above scenario, handle_hotplug_event() will notice
that context->func.parent->is_going_away is already set and it
will exit immediately preventing the crash from happening.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-03 22:30:06 +01:00
Rafael J. Wysocki
d42f5da234 ACPI / hotplug / PCI: Scan root bus under the PCI rescan-remove lock
Since acpiphp_check_bridge() called by acpiphp_check_host_bridge()
does things that require PCI rescan-remove locking around it,
make acpiphp_check_host_bridge() use that locking.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-02-03 22:28:26 +01:00
Rafael J. Wysocki
f41b326131 ACPI / hotplug / PCI: Move PCI rescan-remove locking to hotplug_event()
Commit 9217a98467 (ACPI / hotplug / PCI: Use global PCI rescan-remove
locking) modified ACPIPHP to protect its PCI device removal and addition
code paths from races against sysfs-driven rescan and remove operations
with the help of PCI rescan-remove locking.  However, it overlooked the
fact that hotplug_event_work() is not the only caller of hotplug_event()
which may also be called by dock_hotplug_event() and that code path
is missing the PCI rescan-remove locking.  This means that, although
the PCI rescan-remove lock is held as appropriate during the handling
of events originating from handle_hotplug_event(), the ACPIPHP's
operations resulting from dock events may still suffer the race
conditions that commit 9217a98467 was supposed to eliminate.

To address that problem, move the PCI rescan-remove locking from
hotplug_event_work() to hotplug_event() so that it is used regardless
of the way that function is invoked.

Revamps: 9217a98467 (ACPI / hotplug / PCI: Use global PCI rescan-remove locking)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-02-03 22:28:18 +01:00
Rafael J. Wysocki
2d7c1b77dd ACPI / hotplug / PCI: Remove entries from bus->devices in reverse order
According to the changelog of commit 29ed1f29b6 (PCI: pciehp: Fix null
pointer deref when hot-removing SR-IOV device) it is unsafe to walk the
bus->devices list of a PCI bus and remove devices from it in direct order,
because that may lead to NULL pointer dereferences related to virtual
functions.

For this reason, change all of the bus->devices list walks in
acpiphp_glue.c during which devices may be removed to be carried out in
reverse order.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-02-03 22:28:02 +01:00
Rafael J. Wysocki
04480094de Revert "PCI: Remove from bus_list and release resources in pci_release_dev()"
Revert commit ef83b0781a "PCI: Remove from bus_list and release
resources in pci_release_dev()" that made some nasty race conditions
become possible.  For example, if a Thunderbolt link is unplugged
and then replugged immediately, the pci_release_dev() resulting from
the hot-remove code path may be racing with the hot-add code path
which after that commit causes various kinds of breakage to happen
(up to and including a hard crash of the whole system).

Moreover, the problem that commit ef83b0781a attempted to address
cannot happen any more after commit 8a4c5c329d "PCI: Check parent
kobject in pci_destroy_dev()", because pci_destroy_dev() will now
return immediately if it has already been executed for the given
device.

Note, however, that the invocation of msi_remove_pci_irq_vectors()
removed by commit ef83b0781a from pci_free_resources() along with
the other changes made by it is not added back because of subsequent
code changes depending on that modification.

Fixes: ef83b0781a (PCI: Remove from bus_list and release resources in pci_release_dev())
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-01 10:24:31 -08:00
Linus Torvalds
09da8dfa98 ACPI and power management updates for 3.14-rc1
- ACPI core changes to make it create a struct acpi_device object for every
    device represented in the ACPI tables during all namespace scans regardless
    of the current status of that device.  In accordance with this, ACPI hotplug
    operations will not delete those objects, unless the underlying ACPI tables
    go away.
 
  - On top of the above, new sysfs attribute for ACPI device objects allowing
    user space to check device status by triggering the execution of _STA for
    its ACPI object.  From Srinivas Pandruvada.
 
  - ACPI core hotplug changes reducing code duplication, integrating the
    PCI root hotplug with the core and reworking container hotplug.
 
  - ACPI core simplifications making it use ACPI_COMPANION() in the code
    "glueing" ACPI device objects to "physical" devices.
 
  - ACPICA update to upstream version 20131218.  This adds support for the
    DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
    facilities.  From Bob Moore, Lv Zheng and Betty Dall.
 
  - Init code change to carry out the early ACPI initialization earlier.
    That should allow us to use ACPI during the timekeeping initialization
    and possibly to simplify the EFI initialization too.  From Chun-Yi Lee.
 
  - Clenups of the inclusions of ACPI headers in many places all over from
    Lv Zheng and Rashika Kheria (work in progress).
 
  - New helper for ACPI _DSM execution and rework of the code in drivers
    that uses _DSM to execute it via the new helper.  From Jiang Liu.
 
  - New Win8 OSI blacklist entries from Takashi Iwai.
 
  - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
    Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
    Tang Chen, Zhang Rui.
 
  - intel_pstate driver updates, including proper Baytrail support, from
    Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
 
  - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
 
  - powernow-k6 cpufreq driver fixes from Mikulas Patocka.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
 
  - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
    Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
 
  - cpuidle cleanups from Bartlomiej Zolnierkiewicz.
 
  - Support for hibernation APM events from Bin Shi.
 
  - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
    during thaw transitions from Bjørn Mork.
 
  - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
 
  - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
    Rashika Kheria.
 
  - New tool for profiling system suspend from Todd E Brandt and a cpupower
    tool cleanup from One Thousand Gnomes.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJS3a1eAAoJEILEb/54YlRxnTgP/iGawvgjKWm6Qqp7WSIvd5gQ
 zZ6q75C6Pc/W2fq1+OzVGnpCF8WYFy+nFDAXOvUHjIXuoxSwFcuW5l4aMckgl/0a
 TXEWe9MJrCHHRfDApfFacCJ44U02bjJAD5vTyL/hKA+IHeinq4WCSojryYC+8jU0
 cBrUIV0aNH8r5JR2WJNAyv/U29rXsDUOu0I4qTqZ4YaZT6AignMjtLXn1e9AH1Pn
 DPZphTIo/HMnb+kgBOjt4snMk+ahVO9eCOxh/hH8ecnWExw9WynXoU5Nsna0tSZs
 ssyHC7BYexD3oYsG8D52cFUpp4FCsJ0nFQNa2kw0LY+0FBNay43LySisKYHZPXEs
 2WpESDv+/t7yhtnrvM+TtA7aBheKm2XMWGFSu/aERLE17jIidOkXKH5Y7ryYLNf/
 uyRKxNS0NcZWZ0G+/wuY02jQYNkfYz3k/nTr8BAUItRBjdporGIRNEnR9gPzgCUC
 uQhjXWMPulqubr8xbyefPWHTEzU2nvbXwTUWGjrBxSy8zkyy5arfqizUj+VG6afT
 NsboANoMHa9b+xdzigSFdA3nbVK6xBjtU6Ywntk9TIpODKF5NgfARx0H+oSH+Zrj
 32bMzgZtHw/lAbYsnQ9OnTY6AEWQYt6NMuVbTiLXrMHhM3nWwfg/XoN4nZqs6jPo
 IYvE6WhQZU6L6fptGHFC
 =dRf6
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "As far as the number of commits goes, the top spot belongs to ACPI
  this time with cpufreq in the second position and a handful of PM
  core, PNP and cpuidle updates.  They are fixes and cleanups mostly, as
  usual, with a couple of new features in the mix.

  The most visible change is probably that we will create struct
  acpi_device objects (visible in sysfs) for all devices represented in
  the ACPI tables regardless of their status and there will be a new
  sysfs attribute under those objects allowing user space to check that
  status via _STA.

  Consequently, ACPI device eject or generally hot-removal will not
  delete those objects, unless the table containing the corresponding
  namespace nodes is unloaded, which is extremely rare.  Also ACPI
  container hotplug will be handled quite a bit differently and cpufreq
  will support CPU boost ("turbo") generically and not only in the
  acpi-cpufreq driver.

  Specifics:

   - ACPI core changes to make it create a struct acpi_device object for
     every device represented in the ACPI tables during all namespace
     scans regardless of the current status of that device.  In
     accordance with this, ACPI hotplug operations will not delete those
     objects, unless the underlying ACPI tables go away.

   - On top of the above, new sysfs attribute for ACPI device objects
     allowing user space to check device status by triggering the
     execution of _STA for its ACPI object.  From Srinivas Pandruvada.

   - ACPI core hotplug changes reducing code duplication, integrating
     the PCI root hotplug with the core and reworking container hotplug.

   - ACPI core simplifications making it use ACPI_COMPANION() in the
     code "glueing" ACPI device objects to "physical" devices.

   - ACPICA update to upstream version 20131218.  This adds support for
     the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
     debug facilities.  From Bob Moore, Lv Zheng and Betty Dall.

   - Init code change to carry out the early ACPI initialization
     earlier.  That should allow us to use ACPI during the timekeeping
     initialization and possibly to simplify the EFI initialization too.
     From Chun-Yi Lee.

   - Clenups of the inclusions of ACPI headers in many places all over
     from Lv Zheng and Rashika Kheria (work in progress).

   - New helper for ACPI _DSM execution and rework of the code in
     drivers that uses _DSM to execute it via the new helper.  From
     Jiang Liu.

   - New Win8 OSI blacklist entries from Takashi Iwai.

   - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
     Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
     Rashika Kheria, Tang Chen, Zhang Rui.

   - intel_pstate driver updates, including proper Baytrail support,
     from Dirk Brandewie and intel_pstate documentation from Ramkumar
     Ramachandra.

   - Generic CPU boost ("turbo") support for cpufreq from Lukasz
     Majewski.

   - powernow-k6 cpufreq driver fixes from Mikulas Patocka.

   - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
     Brown.

   - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
     Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
     Kumar.

   - cpuidle cleanups from Bartlomiej Zolnierkiewicz.

   - Support for hibernation APM events from Bin Shi.

   - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
     disabled during thaw transitions from Bjørn Mork.

   - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
     Hansson.

   - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
     Kurusa, Rashika Kheria.

   - New tool for profiling system suspend from Todd E Brandt and a
     cpupower tool cleanup from One Thousand Gnomes"

* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
  thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
  cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
  Documentation: cpufreq / boost: Update BOOST documentation
  cpufreq: exynos: Extend Exynos cpufreq driver to support boost
  cpufreq / boost: Kconfig: Support for software-managed BOOST
  acpi-cpufreq: Adjust the code to use the common boost attribute
  cpufreq: Add boost frequency support in core
  intel_pstate: Add trace point to report internal state.
  cpufreq: introduce cpufreq_generic_get() routine
  ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
  cpufreq: stats: create sysfs entries when cpufreq_stats is a module
  cpufreq: stats: free table and remove sysfs entry in a single routine
  cpufreq: stats: remove hotplug notifiers
  cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
  cpufreq: speedstep: remove unused speedstep_get_state
  platform: introduce OF style 'modalias' support for platform bus
  PM / tools: new tool for suspend/resume performance optimization
  ACPI: fix module autoloading for ACPI enumerated devices
  ACPI: add module autoloading support for ACPI enumerated devices
  ACPI: fix create_modalias() return value handling
  ...
2014-01-24 15:51:02 -08:00
Linus Torvalds
f2c73464d7 ARM: SoC cleanups for 3.14
This is the branch where we usually queue up cleanup efforts, moving
 drivers out of the architecture directory, header file restructuring,
 etc. Sometimes they tangle with new development so it's hard to keep it
 strictly to cleanups.
 
 Some of the things included in this branch are:
 
 * Atmel SAMA5 conversion to common clock
 * Reset framework conversion for tegra platforms
  - Some of this depends on tegra clock driver reworks that are shared with Mike
    Turquette's clk tree.
 * Tegra DMA refactoring, which are shared branches with the DMA tree.
 * Removal of some header files on exynos to prepare for multiplatform
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4Vf7AAoJEIwa5zzehBx3f9UP/jwMlbfbSZHfNQ/QG0SqZ9RD
 zvddyDMHY/qXnzgF3Dax+JR9BDDVy8AlQe713FCoiHJZggWRAbbavkx8gxITDrZQ
 6NYaEkkuVxqyM8APl3PwMqYm8UZ8MUf4lCltlOA4jkesY9vue91AFnfyKh2CvHrn
 Leg4XT6mFzf/vYDL6RbvTz/Qr253uv3KvYBxkeiRNa0Y7OXRemEXSOfgxh0YGxUl
 LZ2IWQFOh/DH4kaeQI8V4G67X3ceHiFyhCnl0CPwfxaZaNBVaxvIFgIUTdetS6Sb
 zcXa029tE/Dfsr55vZAv9LUHEipCSOeE5rn2EJWehTWyM7vJ42Eozqgh+zfCjXS7
 Ib6g2npsvIluQit/RdITu44h5yZlrQsLgKTGJ8jjXqbT4HQ/746W8b/TP0YLtbw7
 N8oqr7k4vsZyF0dAYZQtfQUZeGISz67UbFcdzl9tmYOR7HFuAYkAQYst77zkVJf8
 om59BAYYTG5FNjQ4I9AKUfJzxXYveI6AKpXSCCZiahpFM2D1CJIzp9Wi0GwK1HRR
 sFVWhS0dajvz63pVVC2tw5Sq4J7onRRNGIXFPoE5fkmlelm0/q0zzGjw3Z0nTqbZ
 8zxuwuy2FfPJK11GbUAIhAgn1sCLYyAhl6IE+FsanGeMOSGIMrH0v5/HphAxoCXt
 BvqMDogyLoGPce1Gm3pJ
 =3CcT
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is the branch where we usually queue up cleanup efforts, moving
  drivers out of the architecture directory, header file restructuring,
  etc.  Sometimes they tangle with new development so it's hard to keep
  it strictly to cleanups.

  Some of the things included in this branch are:

   * Atmel SAMA5 conversion to common clock
   * Reset framework conversion for tegra platforms
    - Some of this depends on tegra clock driver reworks that are shared
      with Mike Turquette's clk tree.
   * Tegra DMA refactoring, which are shared branches with the DMA tree.
   * Removal of some header files on exynos to prepare for
     multiplatform"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
  ARM: mvebu: remove prototypes of non-existing functions from common.h
  ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  ARM: EXYNOS: Kill exynos_pm_late_initcall()
  ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
  ARM: at91: switch Calao QIL-A9260 board to DT
  clk: at91: fix pmc_clk_ids data type attriubte
  PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
  ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
  ...
2014-01-23 18:36:55 -08:00
Linus Torvalds
84621c9b18 Features:
- FIFO event channels. Key advantages: support for over 100,000 events (2^17),
    16 different event priorities, improved fairness in event latency through
    the use of FIFOs.
  - Xen PVH support. "It’s a fully PV kernel mode, running with paravirtualized
    disk and network, paravirtualized interrupts and timers, no emulated devices
    of any kind (and thus no qemu), no BIOS or legacy boot — but instead of
    requiring PV MMU, it uses the HVM hardware extensions to virtualize the
    pagetables, as well as system calls and other privileged operations."
    (from "The Paravirtualization Spectrum, Part 2: From poles to a spectrum")
 Bug-fixes:
  - Fixes in balloon driver (refactor and make it work under ARM)
  - Allow xenfb to be used in HVM guests.
  - Allow xen_platform_pci=0 to work properly.
  - Refactors in event channels.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJS4BmLAAoJEFjIrFwIi8fJ4SAH/iNGESowgMhfW64vRA8pBWq+
 NRJpUjYjjwmbxpwoNl6NPwn15cIXFyc3sMtvvrDD3taRDyko2RFuT+NTjpO05xPh
 d/cRpRXpXERHoiFgPf/WTp7ONBDhvPtHG0+BzJKwgqEIOUYXdbhD+gEjaVlFJScS
 CAY68OLmk7XYMSZBNzPfKNbSCyhVgZF7wpaimK9lxZBKsFRCDIq6jIyrAsC8epIL
 6V/V4l2S6lk/uUeGB6ULphYeINjI2kkpbSfCd1vyenLfWpVscc2o8uWEYFcZMAxy
 V4HpsoseuqrfdDqgPfud3VgogdISvbkCvDfW85rzfDP4MWxei2mVHFtJ/gSBV+g=
 =ToNG
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen updates from Konrad Rzeszutek Wilk:
 "Two major features that Xen community is excited about:

  The first is event channel scalability by David Vrabel - we switch
  over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO
  queue with priorities.  This lets us be able to handle more events,
  have lower latency, and better scalability.  Good stuff.

  The other is PVH by Mukesh Rathor.  In short, PV is a mode where the
  kernel lets the hypervisor program page-tables, segments, etc.  With
  EPT/NPT capabilities in current processors, the overhead of doing this
  in an HVM (Hardware Virtual Machine) container is much lower than the
  hypervisor doing it for us.

  In short we let a PV guest run without doing page-table, segment,
  syscall, etc updates through the hypervisor - instead it is all done
  within the guest container.  It is a "hybrid" PV - hence the 'PVH'
  name - a PV guest within an HVM container.

  The major benefits are less code to deal with - for example we only
  use one function from the the pv_mmu_ops (which has 39 function
  calls); faster performance for syscall (no context switches into the
  hypervisor); less traps on various operations; etc.

  It is still being baked - the ABI is not yet set in stone.  But it is
  pretty awesome and we are excited about it.

  Lastly, there are some changes to ARM code - you should get a simple
  conflict which has been resolved in #linux-next.

  In short, this pull has awesome features.

  Features:
   - FIFO event channels.  Key advantages: support for over 100,000
     events (2^17), 16 different event priorities, improved fairness in
     event latency through the use of FIFOs.
   - Xen PVH support.  "It’s a fully PV kernel mode, running with
     paravirtualized disk and network, paravirtualized interrupts and
     timers, no emulated devices of any kind (and thus no qemu), no BIOS
     or legacy boot — but instead of requiring PV MMU, it uses the HVM
     hardware extensions to virtualize the pagetables, as well as system
     calls and other privileged operations." (from "The
     Paravirtualization Spectrum, Part 2: From poles to a spectrum")

  Bug-fixes:
   - Fixes in balloon driver (refactor and make it work under ARM)
   - Allow xenfb to be used in HVM guests.
   - Allow xen_platform_pci=0 to work properly.
   - Refactors in event channels"

* tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits)
  xen/pvh: Set X86_CR0_WP and others in CR0 (v2)
  MAINTAINERS: add git repository for Xen
  xen/pvh: Use 'depend' instead of 'select'.
  xen: delete new instances of __cpuinit usage
  xen/fb: allow xenfb initialization for hvm guests
  xen/evtchn_fifo: fix error return code in evtchn_fifo_setup()
  xen-platform: fix error return code in platform_pci_init()
  xen/pvh: remove duplicated include from enlighten.c
  xen/pvh: Fix compile issues with xen_pvh_domain()
  xen: Use dev_is_pci() to check whether it is pci device
  xen/grant-table: Force to use v1 of grants.
  xen/pvh: Support ParaVirtualized Hardware extensions (v3).
  xen/pvh: Piggyback on PVHVM XenBus.
  xen/pvh: Piggyback on PVHVM for grant driver (v4)
  xen/grant: Implement an grant frame array struct (v3).
  xen/grant-table: Refactor gnttab_init
  xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init.
  xen/pvh: Piggyback on PVHVM for event channels (v2)
  xen/pvh: Update E820 to work with PVH (v2)
  xen/pvh: Secondary VCPU bringup (non-bootup CPUs)
  ...
2014-01-22 22:00:18 -08:00
Linus Torvalds
e1ba84597c PCI changes for the v3.14 merge window:
Resource management
     - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
     - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
     - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
     - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
     - Enforce bus address limits in resource allocation (Yinghai Lu)
     - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
     - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)
 
   PCI device hotplug
     - Major rescan/remove locking update (Rafael J. Wysocki)
     - Make ioapic builtin only (not modular) (Yinghai Lu)
     - Fix release/free issues (Yinghai Lu)
     - Clean up pciehp (Bjorn Helgaas)
     - Announce pciehp slot info during enumeration (Bjorn Helgaas)
 
   MSI
     - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
     - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
     - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
     - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
     - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)
 
   SR-IOV
     - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)
 
   Virtualization
     - Add support for save/restore of extended capabilities (Alex Williamson)
     - Add Virtual Channel to save/restore support (Alex Williamson)
     - Never treat a VF as a multifunction device (Alex Williamson)
     - Add pci_try_reset_function(), et al (Alex Williamson)
 
   AER
     - Ignore non-PCIe error sources (Betty Dall)
     - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
     - Consolidate HEST error source parsers (Bjorn Helgaas)
     - Add a TLP header print helper (Borislav Petkov)
 
   Freescale i.MX6
     - Remove unnecessary code (Fabio Estevam)
     - Make reset-gpio optional (Marek Vasut)
     - Report "link up" only after link training completes (Marek Vasut)
     - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
     - Fix PCIe startup code (Richard Zhu)
 
   Marvell MVEBU
     - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
     - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
     - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
     - Support a bridge with no IO port window (Jason Gunthorpe)
     - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
     - Remove redundant of_match_ptr (Sachin Kamat)
     - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)
 
   NVIDIA Tegra
     - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)
 
   Renesas R-Car
     - Add runtime PM support (Valentine Barshak)
     - Fix rcar_pci_probe() return value check (Wei Yongjun)
 
   Synopsys DesignWare
     - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
     - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
     - Fix missing MSI IRQs (Harro Haan)
     - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
     - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
     - Whitespace cleanup (Jingoo Han)
 
   EISA
     - Call put_device() if device_register() fails (Levente Kurusa)
     - Revert EISA initialization breakage ((Bjorn Helgaas)
 
   Miscellaneous
     - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
     - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
     - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
     - Use dev_is_pci() to identify PCI devices (Yijing Wang)
     - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
     - Update documentation 00-INDEX (Erik Ekman)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3ujEAAoJEFmIoMA60/r8A4EQAK9AZSUSVNWvlKdC1PrBfT3w
 7fVILx5A4KWsOU8eoFwCPQLrgvUtMltg16yN2tbCjqpKEdrVc36biMO9bwhnXSyZ
 KopHKMWnn0sza/z2H8mcGy+0azGdWcIjcErX/a8WeS6zyWBjm+yzckrHNVpPu4Ca
 SpCBhfgBMjKyIZyLtP6juFSH34S2DfQex4oUSyPC+gjqPy5wW/xw/kBxZfOXl+yU
 P9pQT+geMIc31pETMdG9wd/TT+47YAui4ieSggoVxfVrphCXv6S8mOMCMuQc2bAy
 MHy9uFm1jbvKZZIYrzJ+9HFiiU/6MNiOO3Ygua52xuSp1Zrcjwi2CLD9/QBXbDVs
 pTKU5JIO7q43llkQUpIXTwBvEApSZRhuqzXegsMAYIg4AWmbfm/2fXkfWlQThYMp
 J48blAJZ4t0vhMr9usgwbtdBe8F5euExOxpwH0QMCMABbuu8/B3TLm39+LTcIbsw
 Efgm3N9iUTyiV5fe9Rr62nflhyqXjTevPl4wbZZe4OOdm0MXZY+/BzuNJhg3wyY8
 QKz2J3FB6OR7BCLHCp80l50s5+Ih4F5kmOXwFKjT1D1MFRaNaPDmp9BY6TitU6hg
 zj55gP4c8x6n3alakbf972Yhgs/4oi1va8cZL+pCYWb8nPO5ldaMiT7QBBLUreQV
 BtDtC7u/AFWJ5e73+jVO
 =La1R
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...
2014-01-22 16:39:28 -08:00
Bjorn Helgaas
6e2d98dc1a Merge branch 'pci/reset' into next
* pci/reset:
  vfio-pci: Use pci "try" reset interface
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
2014-01-15 10:53:35 -07:00
Bjorn Helgaas
4030461846 Merge branch 'pci/locking' into next
* pci/locking:
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
2014-01-15 10:53:23 -07:00
Bjorn Helgaas
1255dfbb0c Merge branch 'pci/misc' into next
* pci/misc:
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Never treat a VF as a multifunction device
2014-01-15 10:52:41 -07:00
Rafael J. Wysocki
8a4c5c329d PCI: Check parent kobject in pci_destroy_dev()
If pci_stop_and_remove_bus_device() is run concurrently for a device and
its parent bridge via remove_callback(), both code paths attempt to acquire
pci_rescan_remove_lock.  If the child device removal acquires it first,
there will be no problems.  However, if the parent bridge removal acquires
it first, it will eventually execute pci_destroy_dev() for the child
device, but that device object will not be freed yet due to the reference
held by the concurrent child removal.  Consequently, both
pci_stop_bus_device() and pci_remove_bus_device() will be executed for that
device unnecessarily and pci_destroy_dev() will see a corrupted list head
in that object.  Moreover, an excess put_device() will be executed for that
device in that case which may lead to a use-after-free in the final
kobject_put() done by sysfs_schedule_callback_work().

To avoid that problem, make pci_destroy_dev() check if the device's parent
kobject is NULL, which only happens after device_del() has already run for
it.  Make pci_destroy_dev() return immediately whithout doing anything in
that case.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-15 10:34:13 -07:00
Rafael J. Wysocki
a83919e094 xen/pcifront: Use global PCI rescan-remove locking
Multiple race conditions are possible between the Xen pcifront device
addition and removal and the generic PCI device addition and removal that
can be triggered via sysfs.

To avoid those race conditions make the Xen pcifront code use global PCI
rescan-remove locking.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-15 10:34:13 -07:00
Bjorn Helgaas
ebd50b939c PCI: Fix pci_check_and_unmask_intx() comment typos
Fix typos in pci_check_and_unmask_intx() function comment.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14 17:10:39 -07:00
Alex Williamson
61cf16d8bd PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
When doing a function/slot/bus reset PCI grabs the device_lock for each
device to block things like suspend and driver probes, but call paths exist
where this lock may already be held.  This creates an opportunity for
deadlock.  For instance, vfio allows userspace to issue resets so long as
it owns the device(s).  If a driver unbind .remove callback races with
userspace issuing a reset, we have a deadlock as userspace gets stuck
waiting on device_lock while another thread has device_lock and waits for
.remove to complete.  To resolve this, we can make a version of the reset
interfaces which use trylock.  With this, we can safely attempt a reset and
return error to userspace if there is contention.

[bhelgaas: the deadlock happens when A (userspace) has a file descriptor for
the device, and B waits in this path:

  driver_detach
    device_lock                     # take device_lock
    __device_release_driver
      pci_device_remove             # pci_bus_type.remove
        vfio_pci_remove             # pci_driver .remove
          vfio_del_group_dev
            wait_event(vfio.release_q, !vfio_dev_present)   # wait (holding device_lock)

Now B is stuck until A gives up the file descriptor.  If A tries to acquire
device_lock for any reason, we deadlock because A is waiting for B to release
the lock, and B is waiting for A to release the file descriptor.]

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14 16:34:44 -07:00
Rafael J. Wysocki
c4ec84c7db PCI: hotplug: Use global PCI rescan-remove locking
Multiple race conditions are possible between PCI hotplug and the generic
PCI bus rescan and device removal that can be triggered via sysfs.

To avoid those race conditions make PCI hotplug use global PCI
rescan-remove locking.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14 12:14:25 -07:00
Rafael J. Wysocki
9217a98467 ACPI / hotplug / PCI: Use global PCI rescan-remove locking
Multiple race conditions are possible between the ACPI-based PCI hotplug
(ACPIPHP) and the generic PCI bus rescan and device removal that can be
triggered via sysfs.

To avoid those race conditions make the ACPIPHP code use global PCI
rescan-remove locking.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14 12:14:25 -07:00
Rafael J. Wysocki
9d16947b75 PCI: Add global pci_lock_rescan_remove()
There are multiple PCI device addition and removal code paths that may be
run concurrently with the generic PCI bus rescan and device removal that
can be triggered via sysfs.  If that happens, it may lead to multiple
different, potentially dangerous race conditions.

The most straightforward way to address those problems is to run
the code in question under the same lock that is used by the
generic rescan/remove code in pci-sysfs.c.  To prepare for those
changes, move the definition of the global PCI remove/rescan lock
to probe.c and provide global wrappers, pci_lock_rescan_remove()
and pci_unlock_rescan_remove(), allowing drivers to manipulate
that lock.  Also provide pci_stop_and_remove_bus_device_locked()
for the callers of pci_stop_and_remove_bus_device() who only need
to hold the rescan/remove lock around it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13 17:49:49 -07:00
Bjorn Helgaas
4c85980429 PCI: Reorder so actual code comes before stubs
Consistently use the:

    #ifdef CONFIG_PCI_FOO
    int pci_foo(...);
    #else
    static inline int pci_foo(...) { return -1; }
    #endif

pattern, instead of sometimes using "#ifndef CONFIG_PCI_FOO".

No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13 17:01:11 -07:00
Bjorn Helgaas
597db6f38c Merge branch 'pci/dead-code' into next
* pci/dead-code:
  PCI: Make local functions static
  PCI: Remove unused alloc_pci_dev()
  PCI: Remove unused pci_renumber_slot()
  PCI: Remove unused pcie_aspm_enabled()
  PCI: Remove unused pci_vpd_truncate()
  PCI: Remove unused ID-Based Ordering support
  PCI: Remove unused Optimized Buffer Flush/Fill support
  PCI: Remove unused Latency Tolerance Reporting support
  PCI: Removed unused parts of Page Request Interface support

Conflicts:
	drivers/pci/pci.c
	include/linux/pci.h
2014-01-13 16:47:08 -07:00
Bjorn Helgaas
6b9bd1e3ee Merge branch 'pci/aer' into next
* pci/aer:
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
2014-01-13 16:46:15 -07:00
Betty Dall
339c0fc586 PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
In the discussion for this set of patches [link below], Bjorn Helgaas
pointed out that the ACPI HEST AER error sources do not have the PCIe
segment number associated with the bus.  I worked with the ACPI spec and
got this change to definition of the "Bus" field into the recently released
ACPI Spec 5.0a section 18.3.2.3-5:

  Identifies the PCI Bus and Segment of the device.  The Bus is encoded in
  bits 0-7.  For systems that expose multiple PCI segment groups, the
  segment number is encoded in bits 8-23 and bits 24-31 must be zero.  For
  systems that do not expose multiple PCI segment groups, bits 8-31 must be
  zero.  If the GLOBAL flag is specified, this field is ignored.

This patch makes use of the new definition in the only place in the kernel
that uses the acpi_hest_aer_common's bus field.

This depends on 36f3615152 ("ACPICA: Add helper macros to extract
bus/segment numbers from HEST table.")

Link: http://lkml.kernel.org/r/1370542251-27387-1-git-send-email-betty.dall@hp.com
Signed-off-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13 12:18:55 -07:00
Stephen Hemminger
0b950f0f3c PCI: Make local functions static
Using 'make namespacecheck' identify code which should be declared static.
Checked for users in other driver/archs as well.  Compile tested only.

This stops exporting the following interfaces to modules:

    pci_target_state()
    pci_load_saved_state()

[bhelgaas: retained pci_find_next_ext_capability() and pci_cfg_space_size()]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13 11:57:29 -07:00
Stephen Hemminger
e2760c54a4 PCI: Remove unused alloc_pci_dev()
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This removes this unused and deprecated interface:

    alloc_pci_dev()

[bhelgaas: split to separate patch]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13 11:57:29 -07:00
Stephen Hemminger
4ab4467606 PCI: Remove unused pci_renumber_slot()
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This reverts part of f46753c5e3 ("PCI: introduce pci_slot") and
d25b7c8d6b ("PCI: rename pci_update_slot_number to pci_renumber_slot"),
removing this interface:

    pci_renumber_slot()

[bhelgaas: split to separate patch, add historical link from Alex]
Link: http://lkml.kernel.org/r/20081009043140.8678.44164.stgit@bob.kio
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Chiang <achiang@canonical.com>
2014-01-13 11:14:44 -07:00
Stephen Hemminger
8f92fb06ff PCI: Remove unused pcie_aspm_enabled()
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This reverts part of 3e1b16002a ("ACPI/PCI: PCIe ASPM _OSC support
capabilities called when root bridge added"), removing this interface:

    pcie_aspm_enabled()

[bhelgaas: split to separate patch]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Andrew Patterson <andrew.patterson@hp.com>
2014-01-13 11:14:44 -07:00
Stephen Hemminger
3984ca1c6e PCI: Remove unused pci_vpd_truncate()
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This reverts db5679437a ("PCI: add interface to set visible size of
VPD"), removing this interface:

    pci_vpd_truncate()

[bhelgaas: split to separate patch, also remove prototype from pci.h]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13 11:14:43 -07:00
Rafael J. Wysocki
fbb9c10d40 Merge branch 'acpi-dsm'
* acpi-dsm:
  ACPI / extlog: replace open-coded _DSM code with helper functions
  ACPI / nouveau: replace open-coded _DSM code with helper functions
  nouveau / ACPI: fix memory leak in ACPI _DSM related code
  ACPI / i915: replace open-coded _DSM code with helper functions
  ACPI / i2c-hid: replace open-coded _DSM code with helper functions
  ACPI / TPM: detect PPI features by checking availability of _DSM functions
  ACPI / TPM: replace open-coded _DSM code with helper functions
  ACPI / TPM: match node name instead of full path when searching for TPM device
  PCI / pci-label: treat PCI label with index 0 as valid label
  ACPI / PCI: replace open-coded _DSM code with helper functions
  PCI / pci-label: release allocated ACPI object on error recovery path
  ACPI: introduce helper interfaces for _DSM method
2014-01-12 23:45:52 +01:00
Rafael J. Wysocki
25d412d932 Merge branch 'acpi-hotplug'
* acpi-hotplug:
  ACPI / scan: ACPI device object sysfs attribute for _STA evaluation
  ACPI / hotplug / driver core: Handle containers in a special way
  ACPI / hotplug: Add demand_offline hotplug profile flag
  ACPI / bind: Move acpi_get_child() to drivers/ide/ide-acpi.c
  ACPI / bind: Pass struct acpi_device pointer to acpi_bind_one()
  ACPI / bind: Rework struct acpi_bus_type
  ACPI / bind: Redefine acpi_preset_companion()
  ACPI / bind: Redefine acpi_get_child()
  PCI / ACPI: Use acpi_find_child_device() for child devices lookup
  ACPI / bind: Simplify child device lookups
  ACPI / scan: Use direct recurrence for device hierarchy walks
  ACPI: Introduce acpi_set_device_status()
  ACPI / hotplug: Drop unfinished global notification handling routines
  ACPI / hotplug: Rework generic code to handle suprise removals
  ACPI / hotplug: Move container-specific code out of the core
  ACPI / hotplug: Make ACPI PCI root hotplug use common hotplug code
  ACPI / hotplug: Introduce common hotplug function acpi_device_hotplug()
  ACPI / hotplug: Do not fail bus and device checks for disabled hotplug
  ACPI / scan: Add acpi_device objects for all device nodes in the namespace
  ACPI / scan: Define non-empty device removal handler
2014-01-12 23:45:04 +01:00
Rafael J. Wysocki
98feb7cc61 Merge branch 'acpi-cleanup'
* acpi-cleanup: (22 commits)
  ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
  ACPI / tables: Check if id is NULL in acpi_table_parse()
  ACPI / proc: Include appropriate header file in proc.c
  ACPI / EC: Remove unused functions and add prototype declaration in internal.h
  ACPI / dock: Include appropriate header file in dock.c
  ACPI / PCI: Include appropriate header file in pci_link.c
  ACPI / PCI: Include appropriate header file in pci_slot.c
  ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
  ACPI / NVS: Include appropriate header file in nvs.c
  ACPI / OSL: Mark the function acpi_table_checksum() as static
  ACPI / processor: initialize a variable to silence compiler warning
  ACPI / processor: use ACPI_COMPANION() to get ACPI device
  ACPI: correct minor typos
  ACPI / sleep: Drop redundant acpi_disabled check
  ACPI / dock: Drop redundant acpi_disabled check
  ACPI / table: Replace '1' with specific error return values
  ACPI: remove trailing whitespace
  ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
  ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
  SFI / ACPI: Fix warnings reported during builds with W=1
  ...

Conflicts:
	drivers/acpi/nvs.c
	drivers/hwmon/asus_atk0110.c
2014-01-12 23:44:09 +01:00
Stephen Hemminger
7c2dd2d7cf PCI: Remove unused ID-Based Ordering support
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This reverts b48d4425b6 ("PCI: add ID-based ordering enable/disable
support"), removing these interfaces:

    pci_enable_ido()
    pci_disable_ido()

[bhelgaas: split to separate patch, also remove prototypes from pci.h]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
2014-01-10 16:59:07 -07:00
Stephen Hemminger
ecc8635608 PCI: Remove unused Optimized Buffer Flush/Fill support
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This reverts 48a92a8179 ("PCI: add OBFF enable/disable support"),
removing these interfaces:

    pci_enable_obff()
    pci_disable_obff()

[bhelgaas: split to separate patch, also remove prototypes from pci.h]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
2014-01-10 16:58:49 -07:00
Stephen Hemminger
3ea8197e13 PCI: Remove unused Latency Tolerance Reporting support
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This reverts 51c2e0a7e5 ("PCI: add latency tolerance reporting
enable/disable support"), removing these interfaces:

    pci_enable_ltr()
    pci_disable_ltr()
    pci_set_ltr()

[bhelgaas: split to separate patch, also remove prototypes from pci.h]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
2014-01-10 16:58:32 -07:00
Bjorn Helgaas
96702be560 Merge branch 'pci/resource' into next
* pci/resource:
  PCI: Allocate 64-bit BARs above 4G when possible
  PCI: Enforce bus address limits in resource allocation
  PCI: Split out bridge window override of minimum allocation address
  agp/ati: Use PCI_COMMAND instead of hard-coded 4
  agp/intel: Use CPU physical address, not bus address, for ioremap()
  agp/intel: Use pci_bus_address() to get GTTADR bus address
  agp/intel: Use pci_bus_address() to get MMADR bus address
  agp/intel: Support 64-bit GMADR
  agp/intel: Rename gtt_bus_addr to gtt_phys_addr
  drm/i915: Rename gtt_bus_addr to gtt_phys_addr
  agp: Use pci_resource_start() to get CPU physical address for BAR
  agp: Support 64-bit APBASE
  PCI: Add pci_bus_address() to get bus address of a BAR
  PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev
  PCI: Change pci_bus_region addresses to dma_addr_t
2014-01-10 14:23:15 -07:00
Stephen Hemminger
b340cacc1b PCI: Removed unused parts of Page Request Interface support
My philosophy is unused code is dead code.  And dead code is subject to bit
rot and is a likely source of bugs.  Use it or lose it.

This reverts parts of c320b976d7 ("PCI: Add implementation for PRI
capability"), removing these interfaces:

    pci_pri_enabled()
    pci_pri_stopped()
    pci_pri_status()

[bhelgaas: split to separate patch]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Joerg Roedel <joro@8bytes.org>
2014-01-10 14:00:47 -07:00
Alex Williamson
aa93197736 PCI: Never treat a VF as a multifunction device
Per the SR-IOV spec rev 1.1:

  3.4.1.9 Header Type (Offset 0Eh)

  "... For VFs, this register must be RO Zero."

Unfortunately some devices get this wrong, ex. Emulex OneConnect 10Gb NIC.
When they do it makes us handle ACS testing and therefore IOMMU groups as
if they were actual multifunction devices and require ACS capabilities to
make sure there's no peer-to-peer between functions.  VFs are never
traditional multifunction devices, so simply clear this bit before we get
any further into setup.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=68431
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-10 10:05:26 -07:00
Bjorn Helgaas
04f982beb9 Merge branch 'pci/msi' into next
* pci/msi:
  PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range()
  PCI/MSI: Add pci_msix_vec_count()
  PCI/MSI: Remove pci_enable_msi_block_auto()
  PCI/MSI: Add pci_msi_vec_count()
2014-01-07 17:34:39 -07:00
Bjorn Helgaas
ccb1265454 Merge branch 'pci/misc' into next
* pci/misc:
  PCI: Update documentation 00-INDEX file
  PCI: Convert ioapic to be builtin only, not modular
2014-01-07 17:34:33 -07:00
Bjorn Helgaas
1ecf38c8ae Merge branch 'pci/host-mvebu' into next
* pci/host-mvebu:
  PCI: mvebu: Use max_t() instead of max(resource_size_t,)
  PCI: mvebu: Call pci_ioremap_io() at startup instead of dynamically
2014-01-07 17:34:14 -07:00