This parameter was never used, yet was part of the interface of the
function ever since its introduction as extent_io_ops::writepage_end_io_hook
in e6dcd2dc9c ("Btrfs: New data=ordered implementation"). Now that
NULL is passed everywhere as a value for this parameter let's remove it
for good. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only remaining use of the 'epd' argument in writepage_delalloc is
to reference the extent_io_tree which was set in extent_writepages. Since
it is guaranteed that page->mapping of any page passed to
writepage_delalloc (and __extent_writepage as the sole caller) to be
equal to that passed in extent_writepages we can directly get the
io_tree via the already passed inode (which is also taken from
page->mapping->host). No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If epd::extent_locked is set then writepage_delalloc terminates. Make
this a bit more apparent in the caller by simply bubbling the check up.
This enables to remove epd as an argument to writepage_delalloc in a
future patch. No functional change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before btrfs_map_bio submits all stripe bios it does a number of checks
to ensure the device for every stripe is present. However, it doesn't do
a DEV_STATE_MISSING check, instead this is relegated to the lower level
btrfs_schedule_bio (in the async submission case, sync submission
doesn't check DEV_STATE_MISSING at all). Additionally
btrfs_schedule_bios does the duplicate device->bdev check which has
already been performed in btrfs_map_bio.
This patch moves the DEV_STATE_MISSING check in btrfs_map_bio and
removes the duplicate device->bdev check. Doing so ensures that no bio
cloning/submission happens for both async/sync requests in the face of
missing device. This makes the async io submission path slightly shorter
in terms of instruction count. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
dev_replace::replace_state has been set to
BTRFS_DEV_REPLACE_ITEM_STATE_NEVER_STARTED (0) in the same function,
So delete the line which sets replace_state = 0;
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The io_err field of struct btrfs_log_ctx is no longer used after the
recent simplification of the fast fsync path, where we now wait for
ordered extents to complete before logging the inode. We did this in
commit b5e6c3e170 ("btrfs: always wait on ordered extents at fsync
time") and commit a2120a473a ("btrfs: clean up the left over
logged_list usage") removed its last use.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently are in a loop finding each range (corresponding to a btree
node/leaf) in a log root's extent io tree and then clean it up. This is a
waste of time since we are traversing the extent io tree's rb_tree more
times then needed (one for a range lookup and another for cleaning it up)
without any good reason.
We free the log trees when we are in the critical section of a transaction
commit (the transaction state is set to TRANS_STATE_COMMIT_DOING), so it's
of great convenience to do everything as fast as possible in order to
reduce the time we block other tasks from starting a new transaction.
So fix this by traversing the extent io tree once and cleaning up all its
records in one go while traversing it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The loop construct in free_extent_buffer was added in
242e18c7c1 ("Btrfs: reduce lock contention on extent buffer locks")
as means of reducing the times the eb lock is taken, the non-last ref
count is decremented and lock is released. As the special handling
of UNMAPPED extent buffers was removed now there is only one decrement
op which is happening for EXTENT_BUFFER_UNMAPPED case.
This commit modifies the loop condition so that in case of UNMAPPED
buffers the eb's lock is taken only if we are 100% sure the eb is going
to be freed by the current executor of the code. Additionally, remove
superfluous ref count ops in btrfs test.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the whole of btrfs code has been audited for eb reference count
management it's time to remove the hunk in free_extent_buffer that
essentially considered the condition
"eb->ref == 2 && EXTENT_BUFFER_DUMMY"
to equal "eb->ref = 1". Also remove the last location
which takes an extra reference count in alloc_test_extent_buffer.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In qgroup_rescan_leaf a copy is made of the target leaf by calling
btrfs_clone_extent_buffer. The latter allocates a new buffer and
attaches a new set of pages and copies the content of the source buffer.
The new scratch buffer is only used to iterate it's items, it's not
published anywhere and cannot be accessed by a third party.
Hence, it's not necessary to perform any locking on it whatsoever.
Furthermore, remove the extra extent_buffer_get call since the new
buffer is always allocated with a reference count of 1 which is
sufficient here. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When the 2 comparison trees roots are initialised they are private to
the function and already have reference counts of 1 each. There is no
need to further increment the reference count since the cloned buffers
are already accessed via struct btrfs_path. Eventually the 2 paths used
for comparison are going to be released, effectively disposing of the
cloned buffers.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a rewound buffer is created it already has a ref count of 1 and the
dummy flag set. Then another ref is taken bumping the count to 2.
Finally when this buffer is released from btrfs_release_path the extra
reference is decremented by the special handling code in
free_extent_buffer.
However, this special code is in fact redundant sinca ref count of 1 is
still correct since the buffer is only accessed via btrfs_path struct.
This paves the way forward of removing the special handling in
free_extent_buffer.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
get_old_root used used only by btrfs_search_old_slot to initialise the
path structure. The old root is always a cloned buffer (either via alloc
dummy or via btrfs_clone_extent_buffer) and its reference count is 2: 1
from allocation, 1 from extent_buffer_get call in get_old_root.
This latter explicit ref count acquire operation is in fact unnecessary
since the semantic is such that the newly allocated buffer is handed
over to the btrfs_path for lifetime management. Considering this just
remove the extra extent_buffer_get in get_old_root.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In iterate_inode_exrefs the eb is cloned via btrfs_clone_extent_buffer
which creates a private extent buffer with the dummy flag set and ref
count of 1. Then this buffer is locked for reading and its ref count is
incremented by 1. Finally it's fed to the passed iterate_irefs_t
function. The actual iterate call back is inode_to_path (coming from
paths_from_inode) which feeds the eb to btrfs_ref_to_path. In this final
function the passed eb is only read by first assigning it to the local
eb variable. This variable is only modified in the case another eb was
referenced from the passed path that is eb != eb_in check triggers.
Considering this there is no point in locking the cloned eb in
iterate_inode_refs since it's never being modified and is not published
anywhere. Furthermore the cloned eb is completely fine having its ref
count be 1.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In iterate_inode_refs the eb is cloned via btrfs_clone_extent_buffer
which creates a private extent buffer with the dummy flag set and ref
count of 1. Then this buffer is locked for reading and its ref count is
incremented by 1. Finally it's fed to the passed iterate_irefs_t
function. The actual iterate call back is inode_to_path (coming from
paths_from_inode) which feeds the eb to btrfs_ref_to_path. In this final
function the passed eb is only read by first assigning it to the local
eb variable. This variable is only modified in the case another eb was
referenced from the passed path that is eb != eb_in check triggers.
Considering this there is no point in locking the cloned eb in
iterate_inode_refs since it's never being modified and is not published
anywhere. Furthermore the cloned eb is completely fine having its ref
count be 1.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In extent-io self test, we need 2 ordered extents at its maximum size to
do the test.
Instead of using the intermediate numbers, use BTRFS_MAX_EXTENT_SIZE for
@max_bytes, and twice @max_bytes for @total_dirty. This should explain
why we need all these magic numbers and prevent people to modify them by
accident.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs has not allowed swap files since commit 35054394c4 ("Btrfs: stop
providing a bmap operation to avoid swapfile corruptions"). However, now
that the proper restrictions are in place, Btrfs can support swap files
through the swap file a_ops, similar to iomap in commit 67482129cd
("iomap: add a swapfile activation function").
For Btrfs, activation needs to make sure that the file can be used as a
swap file, which currently means that it must be fully allocated as
NOCOW with no compression on one device. It must also do the proper
tracking so that ioctls will not interfere with the swap file.
Deactivation clears this tracking.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The Btrfs swap code is going to need it, so give it a btrfs_ prefix and
make it non-static.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A later patch will implement swap file support for Btrfs, but before we
do that, we need to make sure that the various Btrfs ioctls cannot
change a swap file.
When a swap file is active, we must make sure that the extents of the
file are not moved and that they don't become shared. That means that
the following are not safe:
- chattr +c (enable compression)
- reflink
- dedupe
- snapshot
- defrag
Don't allow those to happen on an active swap file.
Additionally, balance, resize, device remove, and device replace are
also unsafe if they affect an active swapfile. Add a red-black tree of
block groups and devices which contain an active swapfile. Relocation
checks each block group against this tree and skips it or errors out for
balance or resize, respectively. Device remove and device replace check
the tree for the device they will operate on.
Note that we don't have to worry about chattr -C (disable nocow), which
we ignore for non-empty files, because an active swapfile must be
non-empty and can't be truncated. We also don't have to worry about
autodefrag because it's only done on COW files. Truncate and fallocate
are already taken care of by the generic code. Device add doesn't do
relocation so it's not an issue, either.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the counterpart to merge_extent_hook, similarly, it's used only
for data/freespace inodes so let's remove it, rename it and call it
directly where necessary. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This callback is used only for data and free space inodes. Such inodes
are guaranteed to have their extent_io_tree::private_data set to the
inode struct. Exploit this fact to directly call the function. Also give
it a more descriptive name. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the counterpart to ex-set_bit_hook (now btrfs_set_delalloc_extent),
similar to what was done before remove clear_bit_hook and rename the
function. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This callback is used to properly account delalloc extents for data
inodes (ordinary file inodes and freespace v1 inodes). Those can be
easily identified since they have their extent_io trees ->private_data
member point to the inode. Let's exploit this fact to remove the
needless indirection through extent_io_hooks and directly call the
function. Also give the function a name which reflects its purpose -
btrfs_set_delalloc_extent.
This patch also modified test_find_delalloc so that the extent_io_tree
used for testing doesn't have its ->private_data set which would have
caused a crash in btrfs_set_delalloc_extent due to the btrfs_inode->root
member not being initialised. The old version of the code also didn't
call set_bit_hook since the extent_io ops weren't set for the inode. No
functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This callback was only used in debug builds by btrfs_leak_debug_check.
A better approach is to move its implementation in
btrfs_leak_debug_check and ensure the latter is only executed for extent
tree which have ->private_data set i.e. relate to a data node and not
the btree one. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This callback is ony ever called for data page writeout so there is no
need to actually abstract it via extent_io_ops. Lets just export it,
remove the definition of the callback and call it directly in the
functions that invoke the callback. Also rename the function to
btrfs_writepage_endio_finish_ordered since what it really does is
account finished io in the ordered extent data structures. No
functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This hook is called only from __extent_writepage_io which is already
called only from the data page writeout path. So there is no need to
make an indirect call via extent_io_ops. This patch just removes the
callback definition, exports the callback function and calls it directly
at the only call site. Also give the function a more descriptive name.
No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This callback is called only from writepage_delalloc which in turn is
guaranteed to be called from the data page writeout path. In the end
there is no reason to have the call to this function to be indrected via
the extent_io_ops structure. This patch removes the callback definition,
exports the function and calls it directly. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename to btrfs_run_delalloc_range ]
Signed-off-by: David Sterba <dsterba@suse.com>
This will be used in future patches that remove the optional
extent_io_ops callbacks.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add extra dev extent end check against device boundary.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enhance btrfs_verify_dev_extents() to remember previous checked dev
extents, so it can verify no dev extents can overlap.
Analysis from Hans:
"Imagine allocating a DATA|DUP chunk.
In the chunk allocator, we first set...
max_stripe_size = SZ_1G;
max_chunk_size = BTRFS_MAX_DATA_CHUNK_SIZE
... which is 10GiB.
Then...
/* we don't want a chunk larger than 10% of writeable space */
max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1),
max_chunk_size);
Imagine we only have one 7880MiB block device in this filesystem. Now
max_chunk_size is down to 788MiB.
The next step in the code is to search for max_stripe_size * dev_stripes
amount of free space on the device, which is in our example 1GiB * 2 =
2GiB. Imagine the device has exactly 1578MiB free in one contiguous
piece. This amount of bytes will be put in devices_info[ndevs - 1].max_avail
Next we recalculate the stripe_size (which is actually the device extent
length), based on the actual maximum amount of available raw disk space:
stripe_size = div_u64(devices_info[ndevs - 1].max_avail, dev_stripes);
stripe_size is now 789MiB
Next we do...
data_stripes = num_stripes / ncopies
...where data_stripes ends up as 1, because num_stripes is 2 (the amount
of device extents we're going to have), and DUP has ncopies 2.
Next there's a check...
if (stripe_size * data_stripes > max_chunk_size)
...which matches because 789MiB * 1 > 788MiB.
We go into the if code, and next is...
stripe_size = div_u64(max_chunk_size, data_stripes);
...which resets stripe_size to max_chunk_size: 788MiB
Next is a fun one...
/* bump the answer up to a 16MB boundary */
stripe_size = round_up(stripe_size, SZ_16M);
...which changes stripe_size from 788MiB to 800MiB.
We're not done changing stripe_size yet...
/* But don't go higher than the limits we found while searching
* for free extents
*/
stripe_size = min(devices_info[ndevs - 1].max_avail,
stripe_size);
This is bad. max_avail is twice the stripe_size (we need to fit 2 device
extents on the same device for DUP).
The result here is that 800MiB < 1578MiB, so it's unchanged. However,
the resulting DUP chunk will need 1600MiB disk space, which isn't there,
and the second dev_extent might extend into the next thing (next
dev_extent? end of device?) for 22MiB.
The last shown line of code relies on a situation where there's twice
the value of stripe_size present as value for the variable stripe_size
when it's DUP. This was actually the case before commit 92e222df7b
"btrfs: alloc_chunk: fix DUP stripe size handling", from which I quote:
"[...] in the meantime there's a check to see if the stripe_size does
not exceed max_chunk_size. Since during this check stripe_size is twice
the amount as intended, the check will reduce the stripe_size to
max_chunk_size if the actual correct to be used stripe_size is more than
half the amount of max_chunk_size."
In the previous version of the code, the 16MiB alignment (why is this
done, by the way?) would result in a 50% chance that it would actually
do an 8MiB alignment for the individual dev_extents, since it was
operating on double the size. Does this matter?
Does it matter that stripe_size can be set to anything which is not
16MiB aligned because of the amount of remaining available disk space
which is just taken?
What is the main purpose of this round_up?
The most straightforward thing to do seems something like...
stripe_size = min(
div_u64(devices_info[ndevs - 1].max_avail, dev_stripes),
stripe_size
)
..just putting half of the max_avail into stripe_size."
Link: https://lore.kernel.org/linux-btrfs/b3461a38-e5f8-f41d-c67c-2efac8129054@mendix.com/
Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ add analysis from report ]
Signed-off-by: David Sterba <dsterba@suse.com>
We have a complex loop design for find_free_extent(), that has different
behavior for each loop, some even includes new chunk allocation.
Instead of putting such a long code into find_free_extent() and makes it
harder to read, just extract them into find_free_extent_update_loop().
With all the cleanups, the main find_free_extent() should be pretty
barebone:
find_free_extent()
|- Iterate through all block groups
| |- Get a valid block group
| |- Try to do clustered allocation in that block group
| |- Try to do unclustered allocation in that block group
| |- Check if the result is valid
| | |- If valid, then exit
| |- Jump to next block group
|
|- Push harder to find free extents
|- If not found, re-iterate all block groups
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
[ copy callchain from changelog to function comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will extract unclsutered extent allocation code into
find_free_extent_unclustered().
And this helper function will use return value to indicate what to do
next.
This should make find_free_extent() a little easier to read.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
[Update merge conflict with fb5c39d7a8 ("btrfs: don't use ctl->free_space for max_extent_size")]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two main methods to find free extents inside a block group:
1) clustered allocation
2) unclustered allocation
This patch will extract the clustered allocation into
find_free_extent_clustered() to make it a little easier to read.
Instead of jumping between different labels in find_free_extent(), the
helper function will use return value to indicate different behavior.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of tons of different local variables in find_free_extent(),
extract them into find_free_extent_ctl structure, and add better
explanation for them.
Some modification may looks redundant, but will later greatly simplify
function parameter list during find_free_extent() refactor.
Also add two comments to co-operate with fb5c39d7a8 ("btrfs: don't use
ctl->free_space for max_extent_size"), to make ffe_ctl->max_extent_size
update more reader-friendly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new wrapper update_bytes_pinned to replace open coded
bytes_pinned modifiers. Now the underflows of space_info::bytes_pinned
get detected and reported.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we have space_info::bytes_may_use underflow detection in
btrfs_free_reserved_data_space_noquota(), we have more callers who are
subtracting number from space_info::bytes_may_use.
So instead of doing underflow detection for every caller, introduce a
new wrapper update_bytes_may_use() to replace open coded bytes_may_use
modifiers.
This also introduce a macro to declare more wrappers, but currently
space_info::bytes_may_use is the mostly interesting one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tracking pending ordered extents per transaction was introduced in commit
50d9aa99bd ("Btrfs: make sure logged extents complete in the current
transaction V3") and later updated in commit 161c3549b4 ("Btrfs: change
how we wait for pending ordered extents").
However now that on fsync we always wait for ordered extents to complete
before logging, done in commit 5636cf7d6d ("btrfs: remove the logged
extents infrastructure"), we no longer need the stuff to track for pending
ordered extents, which was not completely removed in the mentioned commit.
So remove the remaining of the pending ordered extents infrastructure.
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The logged_start and logged_end variables, at btrfs_log_changed_extents,
were added in commit 8c6c592831 ("btrfs: log csums for all modified
extents"). However since the recent simplification for fsync, which makes
us wait for all ordered extents to complete before logging extents, we
no longer need those variables. Commit a2120a473a ("btrfs: clean up the
left over logged_list usage") forgot to remove them.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/spdxcheck.py: always open files in binary mode
checkstack.pl: fix for aarch64
userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered
fs/iomap.c: get/put the page in iomap_page_create/release()
hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page()
memblock: annotate memblock_is_reserved() with __init_memblock
psi: fix reference to kernel commandline enable
arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h
mm/sparse: add common helper to mark all memblocks present
mm: introduce common STRUCT_PAGE_MAX_SHIFT define
alpha: fix hang caused by the bootmem removal
Calling UFFDIO_UNREGISTER on virtual ranges not yet registered in uffd
could trigger an harmless false positive WARN_ON. Check the vma is
already registered before checking VM_MAYWRITE to shut off the false
positive warning.
Link: http://lkml.kernel.org/r/20181206212028.18726-2-aarcange@redhat.com
Cc: <stable@vger.kernel.org>
Fixes: 29ec90660d ("userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: syzbot+06c7092e7d71218a2c16@syzkaller.appspotmail.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
migrate_page_move_mapping() expects pages with private data set to have
a page_count elevated by 1. This is what used to happen for xfs through
the buffer_heads code before the switch to iomap in commit 82cb14175e
("xfs: add support for sub-pagesize writeback without buffer_heads").
Not having the count elevated causes move_pages() to fail on memory
mapped files coming from xfs.
Make iomap compatible with the migrate_page_move_mapping() assumption by
elevating the page count as part of iomap_page_create() and lowering it
in iomap_page_release().
It causes the move_pages() syscall to misbehave on memory mapped files
from xfs. It does not not move any pages, which I suppose is "just" a
perf issue, but it also ends up returning a positive number which is out
of spec for the syscall. Talking to Michal Hocko, it sounds like
returning positive numbers might be a necessary update to move_pages()
anyway though
(https://lkml.kernel.org/r/20181116114955.GJ14706@dhcp22.suse.cz).
I only hit this in tests that verify that move_pages() actually moved
the pages. The test also got confused by the positive return from
move_pages() (it got treated as a success as positive numbers were not
expected and not handled) making it a bit harder to track down what's
going on.
Link: http://lkml.kernel.org/r/20181115184140.1388751-1-pjaroszynski@nvidia.com
Fixes: 82cb14175e ("xfs: add support for sub-pagesize writeback without buffer_heads")
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=wHit
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181214' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three small fixes for this week. contains:
- spectre indexing fix for aio (Jeff)
- fix for the previous zeroing bio fix, we don't need it for user
mapped pages, and in fact it breaks some applications if we do
(Keith)
- allocation failure fix for null_blk with zoned (Shin'ichiro)"
* tag 'for-linus-20181214' of git://git.kernel.dk/linux-block:
block: Fix null_blk_zoned creation failure with small number of zones
aio: fix spectre gadget in lookup_ioctx
block/bio: Do not zero user pages
side. Disable it for now.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlwTzaUTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi6eyB/97jq3Wzipr9I+Y3LwJeNKUu/8+LZ1d
EDSbL1mgskzv0iX9fCds+wTzMksvm4V+n7I/DvoadbSEgTz2dUXYqoKBf3+4PEd1
f7K69XHe8X/+ME3wGoOc4oLgNws0yGE5kcmiP5wB9Tlo8EkfqFuu6753wWi8xaUf
so3TX9C+prqYmmhqRI8sesU84rMKjTkkK5dvIgVW4WLBJKsVAhmooyuRSwdVGZOv
m7+8m7PWUJm8stMRDqsJ/0j4COiMeteQGQx6T67gkCUF6pBdJjO2IRNx2VAhybsx
k/sMM/VfrQth/V4zsHZQD75BDQ+wu3Ncz8axIT5QYsAtuh9x0zr2av2e
=kQS2
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"Luis discovered a problem with the new copyfrom offload on the server
side. Disable it for now"
* tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client:
ceph: make 'nocopyfrom' a default mount option
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXBDMLgAKCRDh3BK/laaZ
PPuRAP0X4zYWFh3mcGlcjjfzaP2W/3F8nVsXjo+YADi9nJ+wAwD+LIeL7zGr8Mw8
EixiC+OJyL31O5ZOyHGoPEhhDz4O+Ao=
=hWRh
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Needed to revert a patch, because it possibly introduces a security
hole. Since the patch is basically a conceptual cleanup, not a bug
fix, it's safe to revert. I'm not giving up on this, and discussions
seemed to have reached an agreement over how to move forward, but that
can wait 'till the next release.
The other two patches are fixes for bugs introduced in recent
releases"
* tag 'ovl-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
Revert "ovl: relax permission checking on underlying layers"
ovl: fix decode of dir file handle with multi lower layers
ovl: fix missing override creds in link of a metacopy upper
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXBDKkAAKCRDh3BK/laaZ
PCXdAPwOWqLXpkBL76YaIbgFVzS+S5btlhHwVSZ0w/r7HGA3uQD+IgsHbky1MdSv
rYyKcg+lVzA7GI7tcoQUhC2D9aZ8tAQ=
=I0eL
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"There's one patch fixing a minor but long lived bug, the others are
fixing regressions introduced in this cycle"
* tag 'fuse-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: continue to send FUSE_RELEASEDIR when FUSE_OPEN returns ENOSYS
fuse: Fix memory leak in fuse_dev_free()
fuse: fix revalidation of attributes for permission check
fuse: fix fsync on directory
fuse: Add bad inode check in fuse_destroy_inode()
When FUSE_OPEN returns ENOSYS, the no_open bit is set on the connection.
Because the FUSE_RELEASE and FUSE_RELEASEDIR paths share code, this
incorrectly caused the FUSE_RELEASEDIR request to be dropped and never sent
to userspace.
Pass an isdir bool to distinguish between FUSE_RELEASE and FUSE_RELEASEDIR
inside of fuse_file_put.
Fixes: 7678ac5061 ("fuse: support clients that don't implement 'open'")
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: Chad Austin <chadaustin@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Matthew pointed out that the ioctx_table is susceptible to spectre v1,
because the index can be controlled by an attacker. The below patch
should mitigate the attack for all of the aio system calls.
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we found a problem with the 'copy-from' operation after objects have
been truncated, offloading object copies to OSDs should be discouraged
until the issue is fixed.
Thus, this patch adds the 'nocopyfrom' mount option to the default mount
options which effectily means that remote copies won't be done in
copy_file_range unless they are explicitly enabled at mount time.
[ Adjust ceph_show_options() accordingly. ]
Link: https://tracker.ceph.com/issues/37378
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=wWgw
-----END PGP SIGNATURE-----
Merge tag '4.20-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small fixes: a fix for smb3 direct i/o, a fix for CIFS DFS for
stable and a minor cifs Kconfig fix"
* tag '4.20-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Avoid returning EBUSY to upper layer VFS
cifs: Fix separator when building path from dentry
cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)
