While this is old, now that we moved the intro part of it,
its contents seem to be valid, if we mention that we're
talking only about the BT878 support.
Update the document title accordingly and remove the obsolete
note from it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This document doesn't describe the DVB subsystem. Instead, it
just contain references to some places.
Better name it and improve its contents.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The content there is somewhat outdated. Update to reflect
the current status.
While here, remove extra spaces, as we won't be preserving
left margin alinment on this document.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Part of this document has nothing to do with the Avermedia
driver. It is generic to the entire subsystem. So, split it
on a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There were some changes at the drivers adding support for
more cards. Update cardlists accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some media files got moved. Update the corresponding
references to the referenced files.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For ipu3 ImgU image processing, the frame data from TNR can feed into
DDR by Output Formatting System or feed into YUV downscaler to do YUV
downscaling for secondary output, which is usually used for display.
current ImgU image pipeline diagram misses the YUV downscaling,
this patch add it to aligh with actual hardware blocks.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch add yavta test command in ipu3.rst as an example on how to
run simple ImgU test using yavta.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the table of the RGB formats, add an explicit '-' signs
to cells that contain undefined bits.
This makes it more clear how many bits and bytes are used
for each format.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the media graph topologies for the i.MX6Q SabreSD and SabreAuto.
This makes it easier to understand the topology and follow the
entity descriptions in the following sections.
Also clarify that the SabreSD and SabreLite media pipeline config examples
are for the i.MX6Q boards.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are some uAPI stuff that are driver-specific. Add them
to the main media uAPI body.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Those documents don't really describe the driver API.
Instead, they contain development-specific information.
Yet, as the main index file describes the content of it as:
"how specific kernel subsystems work
from the point of view of a kernel developer"
It seems to be the better fit.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Most of the driver-specific documentation is meant to help
users of the media subsystem.
Move them to the admin-guide.
It should be noticed, however, that several of those files
are outdated and will require further work in order to make
them useful again.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file gives a hint about how fourcc should be named.
It is on a very weird place, as such kind of thing belongs to the
uAPI guide.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All those documents describe the media driver API. So, move
them to the right place within the Kernel documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since 2017, there is an space reserved for userspace API,
created by changeset 1d596dee38 ("docs: Create a user-space API guide").
As the media subsystem was one of the first subsystems to use
Sphinx, until this patch, we were keeping things on a separate
place.
Let's just use the new location, as having all uAPI altogether
will likely make things easier for developers.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains both driver develompent documentation and
userspace API.
Split on two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains both driver develompent documentation and
userspace API.
Split on two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains both driver develompent documentation and
userspace API.
Split on two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains both driver develompent documentation and
userspace API.
Split on two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains both driver develompent documentation and
userspace API.
Split on two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains both driver develompent documentation
(basically, firmware documentation) and IVTV-specific
documentation about VBI and raw formats, focused on uAPI
development.
Split on two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains both admin and development stuff. Split on
two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains both admin and development stuff. Split on
two, as they're usually read by different audiences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of placing both info from admin PoV and uAPI at the
same place, split into two separate documents.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The ci.rst file contains two parts: the first one describing
how to use the CA high level interface; the second one with
uAPI internals.
Split this on two separate files, adding the uAPI bits
to the DVB ca.rst configuration.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to be able to better organize the subsystem, split the
cpia2 information on two files: one user-facing and another one
from Kernel development PoV.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As the entire soc_camera driver is on staging to be removed
soon, let's place there its documentation too.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Fix the time_for_children symlink in /proc/$PID/ so it properly reflects
that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time namespaces,
which was half defined but the actual array member was not added. This
went unnoticed as the array has an exessive empty member at the end but
introduced a user visible regression as the output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to
catch half updated data.
-----BEGIN PGP SIGNATURE-----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=wOiC
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time(keeping) updates from Thomas Gleixner:
- Fix the time_for_children symlink in /proc/$PID/ so it properly
reflects that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time
namespaces, which was half defined but the actual array member was
not added. This went unnoticed as the array has an exessive empty
member at the end but introduced a user visible regression as the
output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
to catch half updated data.
* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ucount: Make sure ucounts in /proc/sys/user don't regress again
time/namespace: Add max_time_namespaces ucount
time/namespace: Fix time_for_children symlink
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y,
which allows us to remove the lib-ksyms.o workaround, and to
solve the last known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler
tests in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
-----BEGIN PGP SIGNATURE-----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=jpyF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
Fix: Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he
sent a reversion patch. I had to modify his patch since
reverting at this point broke Orangefs.
Cleanup 1: Christoph Hellwig noticed that we were doing some unnecessary
work in orangefs_flush, so he sent in a patch that removed
the un-needed code.
Cleanup 2: Al Viro told me he had trouble building Orangefs. Orangefs
should be easy to build, even for Al :-). I looked back
at the test server build notes in orangefs.txt, just in case
that's where the trouble really is, and found a couple of
typos and made a couple of clarifications.
Merge Conflict: Stephen Rothwell reported that my modifications to
orangefs.txt caused a merge conflict with orangefs.rst
in Linux Next. I wasn't sure what to do, so I asked,
and Jonathan Corbet said not to worry about it and
just to report it to Linus.
-----BEGIN PGP SIGNATURE-----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=dNWv
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.
Fix:
- Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he sent a
reversion patch. I had to modify his patch since reverting at this
point broke Orangefs.
Cleanups:
- Christoph Hellwig noticed that we were doing some unnecessary work
in orangefs_flush, so he sent in a patch that removed the un-needed
code.
- Al Viro told me he had trouble building Orangefs. Orangefs should
be easy to build, even for Al :-).
I looked back at the test server build notes in orangefs.txt, just
in case that's where the trouble really is, and found a couple of
typos and made a couple of clarifications"
* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: clarify build steps for test server in orangefs.txt
orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
orangefs: get rid of knob code...
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.
[ebiggers@google.com: v5]
Link: http://lkml.kernel.org/r/20200318230515.171692-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 944d9fec8d ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's quite a few changes this time around. Most of these are fixes
and cleanups, but there's also new chip support for some drivers and a
bit of rework.
-----BEGIN PGP SIGNATURE-----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=Ugxz
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"There's quite a few changes this time around.
Most of these are fixes and cleanups, but there's also new chip
support for some drivers and a bit of rework"
* tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (33 commits)
pwm: pca9685: Fix PWM/GPIO inter-operation
pwm: Make pwm_apply_state_debug() static
pwm: meson: Remove redundant assignment to variable fin_freq
pwm: jz4740: Allow selection of PWM channels 0 and 1
pwm: jz4740: Obtain regmap from parent node
pwm: jz4740: Improve algorithm of clock calculation
pwm: jz4740: Use clocks from TCU driver
pwm: sun4i: Remove redundant needs_delay
pwm: omap-dmtimer: Implement .apply callback
pwm: omap-dmtimer: Do not disable PWM before changing period/duty_cycle
pwm: omap-dmtimer: Fix PWM enabling sequence
pwm: omap-dmtimer: Update description for PWM OMAP DM timer
pwm: omap-dmtimer: Drop unused header file
pwm: renesas-tpu: Drop confusing registered message
pwm: renesas-tpu: Fix late Runtime PM enablement
pwm: rcar: Fix late Runtime PM enablement
dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 support
pwm: meson: Fix confusing indentation
pwm: pca9685: Use gpio core provided macro GPIO_LINE_DIRECTION_OUT
pwm: pca9685: Replace CONFIG_PM with __maybe_unused
...
A couple of bug fixes for the main IPMI driver, one functional and two
annotations.
The kcs driver has some significant updates that have been pending for a
while, but I forgot to include in next until a week ago. But this code
is only used by the people who are sending it to me, really, so it's not
a big deal. I did want it to sit in next for at least a week, and it did
result in a fix.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAl6Qc3AACgkQYfOMkJGb
/4EOxhAAtEkoudrXYDDd39B+wVjW0JZ59jBKtTiosLrK+mE0hyq5rh+lJLqmtKmy
uF69HLqtSGl7ZgpFdzeT8M1fRt4uTTh7BuOkkc2r/18/a+YVJOUFnUpB4BLg06O8
Wr1dMeya6KukM+S3clezCx7jwkwu3V+E8lUKxkQg6zIHRw+DevNUL2Ec6MpZI4SJ
KIjmyp62ASIuME0YeEXnx3wrFzOJIR+01liu4R/4OcDBR2p6fb/TqPFwY4HCq9Fy
pV7riuqXLTGKYk9vnmeHMYZGXT8I55FvkQIB73QWRSpcIyLLcht0wQ04dRQFF/jA
j4ZLfGNTvHgnJQiLmRjPIGGbmiUPx76fWghAC87QtT07HksYEvnsbbxuZ/lZTGdc
NmV7X25HHr/YM4wEffALiaOHXzWXkuxkN0ptzrulbyYOE3631jwAMhcyzucvPvTO
7wU5qshQHTLqQLwyvChdThsKNukmaqOdBH9/vONsXFvgcLy14ZNyR3oPObQUpD6n
CtKbteXSuIA2cjYBj1oCgZ/3lwmYd/DVqGhqGYCnNElnSekF14p312lE+NiXYxnZ
7BIqKBn51asdeWdeJNFOk0qZog6YquwCM7m16kSukzehPaUsovuJkDpVGKpEhYEg
2M4aiiDr/gWpoXJBg6xMM2j//268z6Oe3C6ZX1XPD1jzZ8Gv/Y0=
=vV/F
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Bug fixes for main IPMI driver, kcs updates
A couple of bug fixes for the main IPMI driver, one functional and two
annotations.
The kcs driver has some significant updates that have been pending for
a while, but I forgot to include in next until a week ago. But this
code is only used by the people who are sending it to me, really, so
it's not a big deal. I did want it to sit in next for at least a week,
and it did result in a fix"
* tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs: Fix aspeed_kcs_probe_of_v1()
ipmi: Add missing annotation for ipmi_ssif_lock_cond() and ipmi_ssif_unlock_cond()
ipmi: kcs: aspeed: Implement v2 bindings
ipmi: kcs: Finish configuring ASPEED KCS device before enable
dt-bindings: ipmi: aspeed: Introduce a v2 binding for KCS
ipmi: fix hung processes in __get_guid()
drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists
A collection of small fixes gathered since the previous update.
* ALSA core:
- Regression fix for OSS PCM emulation
* ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
* Others
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped
from anyone's hands.
-----BEGIN PGP SIGNATURE-----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=mFJY
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.
ALSA core:
- Regression fix for OSS PCM emulation
ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
Others:
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped from
anyone's hands"
* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda/realtek - Add quirk for MSI GL63
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ASoC: cs4270: pull reset GPIO low then high
ALSA: hda/realtek - Add HP new mute led supported for ALC236
ALSA: hda/realtek - Add supported new mute Led for HP
ASoC: rt5645: Add platform-data for Medion E1239T
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
ASoC: stm32: sai: Add missing cleanup
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ASoC: Intel: atom: Fix uninitialized variable compiler warning
ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
ASoC: SOF: Turn "firmware boot complete" message into a dbg message
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
ALSA: pcm: oss: Fix regression by buffer overflow fix
edd: Use scnprintf() for avoiding potential buffer overflow
...
The 'altr,pio-1.0' driver does not handle the 'resetvalue', so remove it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
There is no more 'altr,gpio-bank-width' in the 'altr,pio-1.0' driver.
There is a 'altr,ngpio' which is what the property wants to configure.
This change updates all occurrences of 'altr,gpio-bank-width' to
'altr,ngpio'.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Prevent a false-positive static checker warning from triggering
in the ACPI EC driver (Rafael Wysocki), fix white space in an
ACPI document (Vilhelm Prytz) and add static annotation to one
variable (Jason Yan).
-----BEGIN PGP SIGNATURE-----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=wKsb
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These prevent a false-positive static checker warning from triggering
in the ACPI EC driver (Rafael Wysocki), fix white space in an ACPI
document (Vilhelm Prytz) and add static annotation to one variable
(Jason Yan)"
* tag 'acpi-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI, x86/boot: make acpi_nobgrt static
Documentation: firmware-guide: ACPI: fix table alignment in namespace.rst
ACPI: EC: Fix up fast path check in acpi_ec_add()
Add documentation of the binderfs 'stats' mount option.
Description taken from the commit message.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/baa0aa81-007d-af46-16a5-91fead0bd1b9@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Change read with O_NONBLOCK to allow incomplete read and return immediately
(and document it)
- Rest is just cleanup (indent, unused field in struct, extra semicolon)
-----BEGIN PGP SIGNATURE-----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=wKM3
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.7-2' of git://github.com/martinetd/linux
Pull 9p documentation update from Dominique Martinet:
"Document the new O_NONBLOCK short read behavior"
* tag '9p-for-5.7-2' of git://github.com/martinetd/linux:
9p: document short read behaviour with O_NONBLOCK
- support for asynchronous create and unlink (Jeff Layton). Creates
and unlinks are satisfied locally, without waiting for a reply from
the MDS, provided the client has been granted appropriate caps (new
in v15.y.z ("Octopus") release). This can be a big help for metadata
heavy workloads such as tar and rsync. Opt-in with the new nowsync
mount option.
- multiple blk-mq queues for rbd (Hannes Reinecke and myself). When
the driver was converted to blk-mq, we settled on a single blk-mq
queue because of a global lock in libceph and some other technical
debt. These have since been addressed, so allocate a queue per CPU
to enhance parallelism.
- don't hold onto caps that aren't actually needed (Zheng Yan). This
has been our long-standing behavior, but it causes issues with some
active/standby applications (synchronous I/O, stalls if the standby
goes down, etc).
- .snap directory timestamps consistent with ceph-fuse (Luis Henriques)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl6OEO4THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi0XNB/wItYipkjlL5fIUBqiRWzYai72DWdPp
CnOZo8LB+O0MQDomPT6DdpU1OMlWZi5HF7zklrZ35LTm21UkRNC9zvccjs9l66PJ
qo9cKJbxxju+hgzIvgvK9PjlDlaiFAc/pkF8lZ/NaOnSsM1vvsFL9IuY2LXS38MY
A/uUTZNUnFy5udam8TPuN+gWwZcUIH48lRWQLWe2I/hNJSweX1l8OHvecOBg+cYH
G+8vb7mLU2V9ky0YT5JJmVxUV3CWA5wH6ZrWWy1ofVDdeSFLPrhgWX6IMjaNq+Gd
xPfxmly47uBviSqON9dMkiThgy0Qj7yi0Pvx+1sAZbD7aj/6A4qg3LX5
=GIX0
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main items are:
- support for asynchronous create and unlink (Jeff Layton).
Creates and unlinks are satisfied locally, without waiting for a
reply from the MDS, provided the client has been granted
appropriate caps (new in v15.y.z ("Octopus") release). This can be
a big help for metadata heavy workloads such as tar and rsync.
Opt-in with the new nowsync mount option.
- multiple blk-mq queues for rbd (Hannes Reinecke and myself).
When the driver was converted to blk-mq, we settled on a single
blk-mq queue because of a global lock in libceph and some other
technical debt. These have since been addressed, so allocate a
queue per CPU to enhance parallelism.
- don't hold onto caps that aren't actually needed (Zheng Yan).
This has been our long-standing behavior, but it causes issues with
some active/standby applications (synchronous I/O, stalls if the
standby goes down, etc).
- .snap directory timestamps consistent with ceph-fuse (Luis
Henriques)"
* tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits)
ceph: fix snapshot directory timestamps
ceph: wait for async creating inode before requesting new max size
ceph: don't skip updating wanted caps when cap is stale
ceph: request new max size only when there is auth cap
ceph: cleanup return error of try_get_cap_refs()
ceph: return ceph_mdsc_do_request() errors from __get_parent()
ceph: check all mds' caps after page writeback
ceph: update i_requested_max_size only when sending cap msg to auth mds
ceph: simplify calling of ceph_get_fmode()
ceph: remove delay check logic from ceph_check_caps()
ceph: consider inode's last read/write when calculating wanted caps
ceph: always renew caps if mds_wanted is insufficient
ceph: update dentry lease for async create
ceph: attempt to do async create when possible
ceph: cache layout in parent dir on first sync create
ceph: add new MDS req field to hold delegated inode number
ceph: decode interval_sets for delegated inos
ceph: make ceph_fill_inode non-static
ceph: perform asynchronous unlink if we have sufficient caps
ceph: don't take refs to want mask unless we have all bits
...
