v2: Ben Skeggs <bskeggs@redhat.com>
- de-inline nv_icmd, triggers some gcc issue causing ctxnv[ce]0.c to
take a *very* *very* long time to build on some configs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is all very much a policy thing, and hence will not belong in SW
after the rework.
engsw now only handles receiving the event to say "can flip now" and makes
a callback to perform the actual work.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's a *lot* of code in here, and it's all going to use the PGRAPH priv
pointer rather than drm_device after the engine rework. This is handling
all the rename-only parts of the change.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Still the same code, but not an "engine" anymore. The fence code is more of
a policy decision rather than exposing mechanisms, so it's not appropriate
to port it to the new engine subsystem.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Having GPUOBJ and VM intertwined like this makes it *really* hard to
continue porting to the new driver architecture, split it out in
favour of requiring explit maps be the caller.
It's more flexible and obvious this way anyway...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Still missing the main bits we use to change performance levels, I'll get
to it after all the hard yakka has been finished.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2/v3: Ben Skeggs <bskeggs@redhat.com>
- fix typo in default bus selection
- fix accidental loss of destructor
v4: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
- fix typo causing incorrect default i2c port settings when no BMP data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2: Ben Skeggs <bskeggs@redhat.com>
- rebase on top of v3.6-rc6 with gpio reset patch integrated already
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds an extra layer of indirection to each register access, but it's not
too bad, and will also go away as pieces are ported.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These currently just call the existing ones in nouveau_drv.c, but will be
extended in upcoming commits. This needed to be separated from the current
code as there will be some header clashes until things are ported.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This commit provides most of the infrastructure to support a major overhaul
of Nouveau's internals coming in the following commits. This work aims to
take all the things we've learned over the last several years, and turn that
into a cleaner architecture that's more maintainable going forward.
RAMHT and MM bits of the new core have been left out for the moment, and
will be pulled in as I go through the process of porting the code to
become either subdev or engine modules.
There are several main goals I wanted to achieve through this work:
-- Reduce complexity
The goal here was to make each component of the driver as independent as
possible, which will ease maintainability and readability, and provide a
good base for resetting locked up GPU units in the future.
-- Better tracking of GPU units that are required at any given time
This is for future PM work, we'll be able to tell exactly what parts of the
GPU we need powered at any given point (etc).
-- Expose all available NVIDIA GPUs to the client
In order to support things such as multi-GPU channels, we want to be able
to expose all the NVIDIA GPUs to the client over a single file descriptor
so it can send a single push buffer to multiple GPUs.
-- Untangle the core hardware support code from the DRM implementation
This happened initially as an unexpected side-effect of developing the
initial core infrastructure in userspace, but it turned into a goal of
the whole project. Initial benefits will be the availablility of a
number of userspace tools and tests using the same code as the driver
itself, but will also be important as I look into some virtualisation
ideas.
v2: Ben Skeggs <bskeggs@redhat.com>
- fix duplicate assignments noticed by clang
- implement some forgotten yelling in error path
- ensure 64-bit engine mask is used everywhere
v3: Marcin Slusarz <marcin.slusarz@gmail.com>
- sparse fixes
- inline nv_printk into nv_assert to prevent recursive inlining issues
v4: Ben Skeggs <bskeggs@redhat.com>
- fixed minor memory leak on gpuobj destruction
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Future work will be headed in the way of separating the policy supplied by
the nouveau drm module from the mechanisms provided by the driver core.
There will be a couple of major classes (subdev, engine) of driver modules
that have clearly defined tasks, and the further directory structure change
is to reflect this.
No code changes here whatsoever, aside from fixing up a couple of include
file pathnames.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Won't necessarily be a drm_mm_node in the future, and I can't think of any
good reason to not use the offset from the bo struct. There may have been
some reason once apon a time, but, separate commit just in case.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes some unfortunate races on resume. The G84 version of the code doesn't
need this as "gpuobj"s are automagically suspended/resumed by the core code
whereas pinned buffer objects are not.
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
PFIFO_INTR = 0x40000000 appears to be a normal case on nvc0/nve0 PFIFO,
the binary driver appears to completely ignore it in its PFIFO interrupt
handler and even masks off the bit (as we do) in PFIFO_INTR_EN at init
time.
The bits still light up in the hardware sometimes though, so lets just
ignore any bits we haven't explicitely requested.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVIDIA do that at startup too on Fermi, so perhaps the heap of 0x10
intrs we receive are normal and we can ignore them.
On Kepler NVIDIA *don't* do this, but the hardware appears to come up
with the bit masked off by default - so that's probably why :)
This should silence some interrupt spam seen on Fermi+ boards.
Backported patch from reworked nouveau kernel tree.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This fixes the gpio reset problem so the Retina MBP works, but avoids
breaking the Dell systems. Ben will work on a better solution for 3.7.
Tested by me on retina MBP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 991083ba60.
We discovered this causes problem on some Dell eDP laptops, so Apple
lose out for now, I might try and whip up a dmi based workaround for 3.6
but I'm not sure I'll get time.
Signed-off-by: Dave Airlie <airlied@redhat.com>
We noticed a plymouth bug on Fedora 18, and I then
noticed this stupid thinko, fixing it fixed the problem
with plymouth.
Cc: stable@vger.kernel.org
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These two fix the MacBook Pro 2012 Retina display.
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/nouveau/linux-2.6:
drm/nv50-/gpio: initialise to vbios defaults during init
drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
This is required to fix an issue on the Retina MBP where the eDP panel's
AUX channel isn't wired up to the HPD pin for the panel, causing our aux
code to bail out early.
From looking at various traces of the binary driver, it appears NVIDIA do
something very similar on at least all nv50+ chipsets during their
initialisation sequence. So, hopefully this is safe.
Issue and fix initially tracked down by Ryan Bourgeois on fdo#51971.
Backported fix from reworked nouveau kernel module.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
I have a very limited number of traces available for DP on NVD9+, but,
these values produce the same as the binary driver on a confirmed 18-bit
eDP panel and a confirmed 24-bit eDP panel (Retina MBP).
It's interesting that the bitfield values also match the MODE_CTRL values
that control the same thing on nv50:nvd9.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben says its just a single fix to avoid the wrong pcopy units being used.
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/copy: check PUNITS to determine which copy engines are disabled
On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist. And if
what I've seen on Kepler is true of Fermi too, chipsets of the same type
can have different PCOPY units available.
This should fix a v3.5 regression reported by a number of people effecting
suspend/resume on NVC8/NVCE chipsets.
Cc: stable@vger.kernel.org [3.5]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This callback is a no-op in nouveau, and the upcoming apple-gmux
switcheroo support won't require it either. Rather than forcing drivers
to stub it out, just make it optional and remove the callback from
nouveau.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This fix is a backport from the reworked nouveau driver. It masks off the
engines we're not expecting to use before attempting a channel kickoff.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The copy engine exhibits random memory corruption in at least one case, the
GeForce 320M (nv50, 0xaf) in the MacBookAir3,1.
This patch omits creating the engine for the specific chipset, falling back
to M2MF, which kills the symptoms.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
