To build breakpoint_test_arm64, ARCH value is only tested for "aarch64".
It covers only the native build because it's computed from uname -m output.
For cross-compilation, ARCH is set to arm64 and prevent to cross-compile
the test.
Fix the test to allow both native and cross-compilation of the test.
Note: glibc is missing several of the TRAP_* constants in the userspace
definitions. Specifically TRAP_BRANCH and TRAP_HWBKPT.
See https://sourceware.org/bugzilla/show_bug.cgi?id=21286
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
`selftests/Makefile` is defining only `install` as entire PHONY target
though there are few more PHONY targets including `run_tests`. This
commit defines them as the PHONY targets.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
A comment in `run_vmtests` is wrong because it is saying `128MB + 128MB
== 258MB`. This commit fixes the comment.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
A comment for make command usage in `selftets/Makefile` has opening `"`
but no closing `"`. This commit adds the missed `"` in the comment.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
'psock_fanout' has been failing since commit 4d7b9dc1f3 ("tools:
psock_lib: harden socket filter used by psock tests"). That commit
changed the CBPF filter to examine the full ethernet frame, and was
tested on 'psock_tpacket' which uses SOCK_RAW. But 'psock_fanout' was
also using this same CBPF in two places, for filtering and fanout, on a
SOCK_DGRAM socket.
Change 'psock_fanout' to use SOCK_RAW so that the CBPF program used with
SO_ATTACH_FILTER can examine the entire frame. Create a new CBPF
program for use with PACKET_FANOUT_DATA which ignores the header, as it
cannot see the ethernet header.
Tested: Ran tools/testing/selftests/net/psock_{fanout,tpacket} 10 times,
and they all passed.
Fixes: 4d7b9dc1f3 ("tools: psock_lib: harden socket filter used by psock tests")
Signed-off-by: 'Mike Maloney <maloneykernel@gmail.com>'
Signed-off-by: David S. Miller <davem@davemloft.net>
Out of util.h, to disentangle it a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vpksyj3w5fk9t8s6mxmkajyr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A function in kernel/bpf/syscall.c which got a bug fix in 'net'
was moved to kernel/bpf/verifier.c in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Setup a dax_device to have the same lifetime as the pmem block device
and add a ->direct_access() method that is equivalent to
pmem_direct_access(). Once fs/dax.c has been converted to use
dax_operations the old pmem_direct_access() will be removed.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
BootGraph and SleepGraph man pages
- includes full descriptions of tool arguments and commands
- includes examples of common use cases
Makefile
- no build required, used only for install
- installs man pages and tools as libraries with links
- includes an uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
First release into the kernel tools source
- pulls in analyze_suspend.py as as library, same html formatting
- supplants scripts/bootgraph.pl, outputs HTML instead of SVG
- enables automatic reboot and collection for easy timeline capture
- enables ftrace callgraph collection from early boot
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Moved from scripts into tools, and updated from 4.5 to 4.6
- Changed the tool title to SleepGraph
- Reformatted the code so analyze_suspend can be used as a library
- Reorganized all html/js/css handling code to be used by other tools
- upgraded the -summary feature to work faster with better readability
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the rcutorture scripting will give an error message if
running a duplicate scenario that happens also to have a non-existent
build directory (b1, b2, ... in the rcutorture directory). Worse yet, if
the build directory has already been created and used for a real build,
the script will silently grab the wrong Kconfig fragment, which could
cause confusion to the poor sap (me) analyzing old test results. At
least the actual test runs correctly...
This commit therefore accesses the Kconfig fragment from the results
directory corresponding to the first of the duplicate scenarios, for
which a build was actually carried out. This prevents both the messages
and at least one form of later confusion.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Remnants from the git codebase.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kwaez3uxo1w9f8v5r7etl0w6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The users of regex and fnmatch functions should include those headers
instead.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ixzm5kuamsq1ixbkuv6kmwzj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The files using the dirent.h routines should instead include it,
reducing the includes hell that lead to longer build times.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-42g2f4z6nfg7mdb2ae97n7tj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of getting it out of luck from util.h, where it isn't needed at
all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0bqugg5lc5ksla1v4m0dnmc1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we switched to the kernel's roundup_pow_of_two we forgot to remove
this include from util.h, do it now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 91529834d1 ("perf evlist: Use roundup_pow_of_two")
Link: http://lkml.kernel.org/n/tip-kfye5rxivib6155cltx0bw4h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disentangling util.h header mess a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-aj6je8ly377i4upedmjzdsq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Continuing the disentanglement, mostly the TUI needs CTRL(c), that is
in sys/ttydefaults.h and term.c needs the termios headers.
And term.h needs to be added to a few places too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-il19zna7qj9ytavdbwlipc7t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are places where we just need a forward declaration, and others
were we need to include strlist.h and/or strfilter.h, reducing the
impact of changes in headers on the build time, do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zab42gbiki88y9k0csorxekb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving them from util.h, where they don't belong. Since libc already
have string.h, name it slightly differently, as string2.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eh3vz5sqxsrdd8lodoro4jrw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of util.h into a new file, srcline.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ludnlm4djqcdjziekzr4s3u9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Continuing the split of util.[ch] into more manageable bits.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5eu367rwcwnvvn7fz09l7xpb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7wj865zidu5ylf87i6i7v6z7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More stuff that came from git, out of the hodge-podge that is util.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Should make sense for windows, where git is supported.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lzxlhmqrizk72d0zcsreggy8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both do the same thing, the later is the one we get from
linux/stringify.h, i.e. we now use the same function name/practice as
the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-w2sxa5o4bfx7fjrd5mu4zmke@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We get them from inttypes.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qla4e4mwbf1oewafp1ee2etd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed to use the PRI[xu](32,64) formatting macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TYPEOF(), for instance, was only used by MSB() that wasn't used at all,
besides typeof() is used in many places, should be the preferred way.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-golox8oa2w1oq28snki14z6s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As tools/include/linux/kernel.h has it now, with the goodies present in
the kernel.h counterpart, i.e. checking that the parameter is an array
at build time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v0b41ivu6z6dyugbq9ffa9ez@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And with the goodies present in the kernel.h counterpart, i.e. checking
that the parameter is an array at build time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-roiwxwgwgld4kygn65if60wa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the kernel, then look for places redefining it to make it use
this version, which checks that its parameter is an array at build time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-txlcf1im83bcbj6kh0wxmyy8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to adopt the more stringent version of ARRAY_SIZE(), the
one in the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d85dpvay1hoqscpezlntyd8x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With just what we will need in the upcoming changesets, the
BUILD_BUG_ON_ZERO() definition.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lw8zg7x6ttwcvqhp90mwe3vo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We rely on symbol->name[0] since the beginning of tools/perf/, never
having received any complaint about it, also all the containers build
perf just fine, so remove this git codebase remnant.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jsjpgojut8e22o2gtz83augk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it uses EINVAL unconditionally, it needs to also unconditionally
include errno.h.
Detected when recent changes made errno.h not be included by chance when
tools/perf/arch/arm64/util/unwind-libunwind.c gets included by
tools/perf/util/libunwind/arm64.c.
Putting this changeset just before that change so that we don't lose
bisectability on arm64.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8ab596afb9 ("perf tools ARM64: Wire up perf_regs and unwind support")
Link: http://lkml.kernel.org/n/tip-60zjev2o1locp5ivod38epa2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_mem_data_src is a union that is initialized in the kernel via the ->val
field and accessed by userspace via the mem_xxx bitfields. For this to work
correctly on big endian platforms, we need a big-endian definition for the
bitfields.
Currently on a big endian system, if a user requests PERF_SAMPLE_DATA_SRC (perf
report -d), they will get the default value from perf_sample_data_init(), which
is PERF_MEM_NA. The value for PERF_MEM_NA is constructed using shifts:
/* TLB access */
#define PERF_MEM_TLB_NA 0x01 /* not available */
...
#define PERF_MEM_TLB_SHIFT 26
#define PERF_MEM_S(a, s) \
(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
#define PERF_MEM_NA (PERF_MEM_S(OP, NA) |\
PERF_MEM_S(LVL, NA) |\
PERF_MEM_S(SNOOP, NA) |\
PERF_MEM_S(LOCK, NA) |\
PERF_MEM_S(TLB, NA))
Which works out as:
((0x01 << 0) | (0x01 << 5) | (0x01 << 19) | (0x01 << 24) | (0x01 << 26))
Which means the PERF_MEM_NA value comes out of the kernel as 0x5080021
in CPU endian.
But then in the perf tool, the code uses the bitfields to inspect the value, and
currently the bitfields are defined using little endian ordering.
So eg. in perf_mem__tlb_scnprintf() we see:
data_src->val = 0x5080021
op = 0x0
lvl = 0x0
snoop = 0x0
lock = 0x0
dtlb = 0x0
rsvd = 0x5080021
Because of the way the perf tool code is written this is still displayed to the
user as "N/A", so there is no bug visible at the UI level.
Currently there are no big endian architectures which export a meaningful
value (ie. other than PERF_MEM_NA), so the extent of the bug on big endian
platforms is that the PERF_MEM_NA value is exported incorrectly as described
above. Subsequent patches will add support on big endian powerpc for populating
the data source value.
This patch does a minimal fix of adding big endian definition of the bitfields
to match the values that are already exported by the kernel on big endian. And
it makes no change on little endian.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY881cAAoJEHm+PkMAQRiGG4UH+wa2z6Qet36Uc4nXFZuSMYrO
ErUWs1QpTDDv4a+LE4fgyMvM3j9XqtpfQLy1n70jfD14IqPBhHe4gytasAf+8lg1
YvddFx0Yl3sygVu3dDBNigWeVDbfwepW59coN0vI5nrMo+wrei8aVIWcFKOxdMuO
n72u9vuhrkEnLJuQk7SF+t4OQob9McXE3s7QgyRopmlKhKo7mh8On7K2BRI5uluL
t0j5kZM0a43EUT5rq9xR8f5pgtyfTMG/FO2MuzZn43MJcZcyfmnOP/cTSIvAKA5U
1i12lxlokYhURNUe+S6jm8A47TrqSRSJxaQJZRlfGJksZ0LJa8eUaLDCviBQEoE=
=6QWZ
-----END PGP SIGNATURE-----
Merge tag 'v4.11-rc7' into drm-next
Backmerge Linux 4.11-rc7 from Linus tree, to fix some
conflicts that were causing problems with the rerere cache
in drm-tip.
The intel_pstate_tracer.py script only needs to be run as root
when it is also used to actually acquire the trace data that
it will post process. Otherwise it is generally preferable
that it be run as a regular user.
If run the first time as root the results directory will be
incorrect for any subsequent run as a regular user. For any run
as root the specific testname subdirectory will not allow any
subsequent file saves by a regular user. Typically, and for example,
the regular user might be attempting to save a .csv file converted to
a spreadsheet with added calculations or graphs.
Set the directories and files owner and groups IDs to be the regular
user, if required.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The workqueue may still be running when the devres callbacks start
firing to deallocate an acpi_nfit_desc instance. Stop and flush the
workqueue before letting any other devres de-allocations proceed.
Reported-by: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The set_ftrace_file lists both functions that are filtered, as well as
function probes (triggers) that are attached to a function, like traceon or
stacktrace, etc. The reading of this file is not as trivial as most pseudo
files are, and there's been various bugs that have appeared in the past
when there's a mix of probes and functions listed. There's also a difference
when reading the file using dd with a block size of 1.
This test performs the following:
o Resets set_ftrace_filter
o Makes sure only "#### all functions enabled ####" is listed
(All checks uses cat, and dd with bs=1 and bs=100)
o Adds a traceon trigger to schedule
o Checks if only "#### all function enabled ####" and the trigger is there.
o Adds tracing of schedule
o Checks if only schedule and the trigger is there
o Adds tracing of do_IRQ as well
o Checks if only schedule, do_IRQ and the trigger is there
o Adds a traceon trigger to do_IRQ
o Checks if only schedule, do_IRQ and both triggers are there
o Removes tracing of do_IRQ
o Checks if only schedule and both triggers are there
o Removes tracing of schedule
o Checks if only "#### all functions enabled ####" and both triggers are there
o Removes the triggers
o Checks if only "#### all functions enabled ####" is there
o Adds tracing of schedule
o Checks if only schedule is there
o Adds tracing of do_IRQ
o Checks if only schedule and do_IRQ are there
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This adds a test to test the function tiggers traceon and traceoff to make
sure that it starts and stops tracing when a function is hit.
The test performs the following:
o Enables all events
o Writes schedule:traceoff into set_ftrace_filter
o Makes sure the tigger exists in the file
o Makes sure the trace file no longer grows
o Makes sure that tracing_on is now zero
o Clears the trace file
o Makes sure it's still empty
o Removes the trigger
o Makes sure tracing is still off (tracing_on is zero)
o Writes schedule:traceon into set_ftrace_filter
o Makes sure the trace file is no longer empty
o Makes sure that tracing_on file is set to one
o Removes the trigger
o Makes sure the trigger is no longer there
o Writes schedule:traceoff:3 into set_ftrace_filter
o Makes sure that tracing_on turns off
. Writes 1 into tracing_on
. Makes sure that it turns off 2 more times
o Writes 1 into tracing_on
o Makes sure that tracing_on is still a one
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This adds a test to enable and disable trace events via the function
triggers. It tests enabling and disabling the sched:sched_switch event via
the the event_enable and event_disable function triggers attached to the
schedule() kernel function.
The test does the following:
o disable all events
o disables or enables the sched_switch event
o writes schedule:event_enable/disable:sched:sched_switch into set_ftrace_filter
o 5 times it checks to make sure:
. Writes 0/1 into the sched_switch/enable
. Checks that the sched_switch/enable goes back to 1/0
o Resets the events
o writes schedule:event_enable/disable:sched:sched_switch:3 into set_ftrace_filter
o Does a loop of 3 to see that sched_switch/enable file gets updated
o Makes sure the sched_switch/enable stops getting updated
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Just writing into the set_ftrace_filter file does not reset triggers, even
though it can reset the function list. Triggers require writing the trigger
name with a "!" prepended. It's worse that it requires the number if the
trigger has a count associated to it.
Add a reset_ftrace_filter function to the ftrace self tests to allow for the
tests to have a generic way to clear them. It also resets any functions that
are listed in that file as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Keep the nfit_test instances alive until after nfit_test_teardown(), as
we may be doing resource lookups until the final un-registrations have
completed. This fixes crashes of the form.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
IP: __release_resource+0x12/0x90
Call Trace:
remove_resource+0x23/0x40
__wrap_remove_resource+0x29/0x30 [nfit_test_iomap]
acpi_nfit_remove_resource+0xe/0x10 [nfit]
devm_action_release+0xf/0x20
release_nodes+0x16d/0x2b0
devres_release_all+0x3c/0x60
device_release+0x21/0x90
kobject_release+0x6a/0x170
kobject_put+0x2f/0x60
put_device+0x17/0x20
platform_device_unregister+0x20/0x30
nfit_test_exit+0x36/0x960 [nfit_test]
Reported-by: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
after free bug, the selftest that Namhyung added triggers it. I figured
it would be good to add the test for the bug after the fix, such that
it does not exist without the fix.
I added another patch that lets the test only test part of the pid
filtering, and ignores the function-fork (filtering on children as well)
if the function-fork feature does not exist. This feature is added by
Namhyung just before he added this test. But since the test tests both
with and without the feature, it would be good to let it not fail if
the feature does not exist.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJY9kVEFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
nZQIAMJN51sNAnJHodKieAx6NUdnFbih7XknFZePGsGX2CHaRpPJuYRTEMIJrtds
FSGCKOWjmmZ57xB/WYsCdH2H4cqd2TCFIeCT+6Pglk4+L2Y97idg5tzJ0+QGnDqT
zBMd1kcmLathH5OoNsUEO5FR0QplBTb+3kVRu9XaAUgJhIlLwbF58BdtOv0l0avb
saV/cVLosUjb4TXxwPgRZnmH9YElQ7RElf0S60JKbFTHCzyvoG0U17seFAklZOQl
Ux0nn+LFWM+M7e7LYR3nSXnOzofDMz9r1bGGo9bgkng0Csl2Op1MFttofcsi3PvT
FUxUGPZSEjxj3XrxXrkzzK8pRuI=
=NEh1
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.11-rc5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace testcase update from Steven Rostedt:
"While testing my development branch, without the fix for the pid use
after free bug, the selftest that Namhyung added triggers it. I
figured it would be good to add the test for the bug after the fix,
such that it does not exist without the fix.
I added another patch that lets the test only test part of the pid
filtering, and ignores the function-fork (filtering on children as
well) if the function-fork feature does not exist. This feature is
added by Namhyung just before he added this test. But since the test
tests both with and without the feature, it would be good to let it
not fail if the feature does not exist"
* tag 'trace-v4.11-rc5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests: ftrace: Add check for function-fork before running pid filter test
selftests: ftrace: Add a testcase for function PID filter
Have the func-filter-pid test check for the function-fork option before
testing it. It can still test the pid filtering, but will stop before
testing the function-fork option for children inheriting the pids.
This allows the test to be added before the function-fork feature, but after
a bug fix that triggers one of the bugs the test can cause.
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Like event pid filtering test, add function pid filtering test with the
new "function-fork" option. It also tests it on an instance directory
so that it can verify the bug related pid filtering on instances.
Link: http://lkml.kernel.org/r/20170417024430.21194-5-namhyung@kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since when we got rid of usbfs, the /proc/bus/usb is now
elsewhere. Fix references for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In my virtual machine setup, running ftracetest failed on creating
LOG_DIR on a read-only filesystem. It'd be convenient to provide an
option to specify a different directory as log directory.
Link: http://lkml.kernel.org/r/20170417024430.21194-4-namhyung@kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a simulated dimm with an ACPI_NFIT_MEM_MAP_FAILED indication, and
set the ACPI_NFIT_MEM_HEALTH_ENABLED flag on all the dimms where
nfit_test simulates health events, but spread it out over several
redundant memdev entries to test that the nfit driver coalesces all the
flags.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
After doing map_perf_test with a much bigger
BPF_F_NO_COMMON_LRU map, the perf report shows a
lot of time spent in rotating the inactive list (i.e.
__bpf_lru_list_rotate_inactive):
> map_perf_test 32 8 10000 1000000 | awk '{sum += $3}END{print sum}'
19644783 (19M/s)
> map_perf_test 32 8 10000000 10000000 | awk '{sum += $3}END{print sum}'
6283930 (6.28M/s)
By inactive, it usually means the element is not in cache. Hence,
there is a need to tune the PERCPU_NR_SCANS value.
This patch finds a better number of elements to
scan during each list rotation. The PERCPU_NR_SCANS (which
is defined the same as PERCPU_FREE_TARGET) decreases
from 16 elements to 4 elements. This change only
affects the BPF_F_NO_COMMON_LRU map.
The test_lru_dist does not show meaningful difference
between 16 and 4. Our production L4 load balancer which uses
the LRU map for conntrack-ing also shows little change in cache
hit rate. Since both benchmark and production data show no
cache-hit difference, PERCPU_NR_SCANS is lowered from 16 to 4.
We can consider making it configurable if we find a usecase
later that shows another value works better and/or use
a different rotation strategy.
After this change:
> map_perf_test 32 8 10000000 10000000 | awk '{sum += $3}END{print sum}'
9240324 (9.2M/s)
i.e. 6.28M/s -> 9.2M/s
The test_lru_dist has not shown meaningful difference:
> test_lru_dist zipf.100k.a1_01.out 4000 1:
nr_misses: 31575 (Before) vs 31566 (After)
> test_lru_dist zipf.100k.a0_01.out 40000 1
nr_misses: 67036 (Before) vs 67031 (After)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch does the following cleanup on test_lru_map.c
1) Fix indentation (Replace spaces by tabs)
2) Remove redundant BPF_F_NO_COMMON_LRU test
3) Simplify some comments
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
test_lru_sanity3 is not applicable to BPF_F_NO_COMMON_LRU.
It just happens to work when PERCPU_FREE_TARGET == 16.
This patch:
1) Disable test_lru_sanity3 for BPF_F_NO_COMMON_LRU
2) Add test_lru_sanity6 to test list rotation for
the BPF_F_NO_COMMON_LRU map.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts were simply overlapping changes. In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.
In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Thomas Gleixner:
"Two small fixes for perf:
- the move to support cross arch annotation introduced per arch
initialization requirements, fullfill them for s/390 (Christian
Borntraeger)
- add the missing initialization to the LBR entries to avoid exposing
random or stale data"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Avoid exposing wrong/stale data in intel_pmu_lbr_read_32()
perf annotate s390: Fix perf annotate error -95 (4.10 regression)
Few currently running test notification messages from run_vmtests output
have mismatched highlight lines. This commit fixes them to fit in
length.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
trivial fix to spelling mistake in printed message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When debugging the JIT on an embedded platform or cross build
environment, libbfd may not be available, making it impossible to run
bpf_jit_disasm natively.
Add an option to emit a binary image of the JIT code to a file. This
file can then be disassembled off line. Typical usage in this case
might be (pasting mips64 dmesg output to cat command):
$ cat > jit.raw
$ bpf_jit_disasm -f jit.raw -O jit.bin
$ mips64-linux-gnu-objdump -D -b binary -m mips:isa64r2 -EB jit.bin
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In https://lkml.org/lkml/2017/2/2/16 I reported a build error that I
believed was caused by wrong uapi includes. The synthom was fixed by
Arnaldo in:
commit 2f7db55579 ("perf tools: Fix include of linux/mman.h")
but I was wrong attributing the problem to the uapi include.
The root cause was that I was using ARCH=x86_64, hence using the wrong
uapi include path. This explains why no one else ran into this build
problem.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-8-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Besides memory allocation failure, tips.txt may fail to load because the
file is not found (a more likely cause).
Communicate that to the user in tips failure warning.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This change is a follow up of https://lkml.org/lkml/2017/2/2/16
The patch above avoided redefining CC, CXX and PKG_CONFIG in feature
detection. The patch was not merged due to a unsolved concern with the
-MD flag.
Later, commit c8c188679c ("tools build: Use the same CC for feature
detection and actual build") did the change for CC and CXX but not
PKG_CONFIG.
This patch makes PKG_CONFIG consistent with CC and CXX and moves the -MD
to CFLAGS, as suggested by Jiri in the thread above.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The build of JVMTI depends on LIBELF (-lelf). Make Makefile.conf
check this dependendancy and notify user when not present.
v2: Comma nitpicking.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412170745.26620-1-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace supports --no-syscalls option but it's not listed in the man
page. (Though, I see an example using --no-syscalls in EXAMPLES
section.)
Committer note:
The --no-syscalls option tells 'perf trace' not to automagically ask for
raw_syscalls:sys_{enter,exit} to then format it in a strace like way.
This become more used as 'perf trace' got support for arbitrary events,
such as tracepoints, so more and more we use:
# perf trace --no-syscalls -e nmi:*
0.000 nmi:nmi_handler:perf_event_nmi_handler() delta_ns: 36649 handled: 1)
0.019 nmi:nmi_handler:nmi_cpu_backtrace_handler() delta_ns: 2907 handled: 0)
0.676 nmi:nmi_handler:perf_event_nmi_handler() delta_ns: 9401 handled: 1)
0.680 nmi:nmi_handler:nmi_cpu_backtrace_handler() delta_ns: 288 handled: 0)
0.701 nmi:nmi_handler:perf_event_nmi_handler() delta_ns: 4977 handled: 1)
0.703 nmi:nmi_handler:nmi_cpu_backtrace_handler() delta_ns: 67 handled: 0)
0.736 nmi:nmi_handler:perf_event_nmi_handler() delta_ns: 8549 handled: 1)
^C#
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1492063332-5745-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
(This is a patch has been sitting in the Intel CQM/CMT driver series for
a while, despite not depend on it. Sending it now independently since
the series is being discarded.)
When an event is in error state, read() returns 0 instead of sizeof()
buffer. In certain modes, such as interval printing, ignoring the 0
return value may cause bogus count deltas to be computed and thus
invalid results printed.
This patch fixes this problem by modifying read_counters() to mark the
event as not scaled (scaled = -1) to force the printout routine to show
<NOT COUNTED>.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412182301.44406-1-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and
CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both
flags set and an assumed base clock of 100 MHz for turbo values.
Reported-by: GSR <gsr.bugs@infernal-iceberg.com>
Tested-by: GSR <gsr.bugs@infernal-iceberg.com>
References: https://bugs.debian.org/859978
Fixes: 8fb2e440b2 (cpupower: Show Intel turbo ratio support via ...)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull turbostat utility fixes for v4.11 from Len Brown.
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number
tools/power turbostat: fix impossibly large CPU%c1 value
tools/power turbostat: turbostat.8 add missing column definitions
tools/power turbostat: update HWP dump to decimal from hex
tools/power turbostat: enable package THERM_INTERRUPT dump
tools/power turbostat: show missing Core and GFX power on SKL and KBL
tools/power turbostat: bugfix: GFXMHz column not changing
We want dax capable drivers to be able to publish a set of dax
operations [1]. However, we do not want to further abuse block_devices
to advertise these operations. Instead we will attach these operations
to a dax device and add a lookup mechanism to go from block device path
to a dax device. A dax capable driver like pmem or brd is responsible
for registering a dax device, alongside a block device, and then a dax
capable filesystem is responsible for retrieving the dax device by path
name if it wants to call dax_operations.
For now, we refactor the dax pseudo-fs to be a generic facility, rather
than an implementation detail, of the device-dax use case. Where a "dax
device" is just an inode + dax infrastructure, and "Device DAX" is a
mapping service layered on top of that base 'struct dax_device'.
"Filesystem DAX" is then a mapping service that layers a filesystem on
top of that same base device. Filesystem DAX is associated with a
block_device for now, but perhaps directly to a dax device in the
future, or for new pmem-only filesystems.
[1]: https://lkml.org/lkml/2017/1/19/880
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Provide a replacement pgoff_to_phys() that translates an nfit_test
resource (allocated by vmalloc()) to a pfn.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Most CPUs do not have a hardware c1 counter,
and so turbostat derives c1 residency:
c1 = TSC - MPERF - other_core_cstate_counters
As it is not possible to atomically read these coutners,
measurement jitter can case this calcuation to "go negative"
when very close to 0. Turbostat detect that case and
simply prints c1 = 0.00%
But that check neglected to account for systems where the TSC
crystal clock domain and the MPERF BCLK domain are differ by
a small amount. That allowed very small negative c1 numbers
to escape this check and be printed as huge positve numbers.
This code begs for a bit of cleanup, but this patch
is the minimal change to fix the issue.
Signed-off-by: Len Brown <len.brown@intel.com>
Add GFX%rc6 and GFXMHz to the column descriptions section
of the turbostat man page.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Len Brown <len.brown@intel.com>
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C)
cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884b0800 (25 C)
cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
Enable the same per-core output, but hide it behind --debug
because it is too verbose on big systems.
Signed-off-by: Len Brown <len.brown@intel.com>
While the current SDM is silent on the matter, the Core and GFX
RAPL power meters on SKL and KBL appear to work -- so show them.
Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
( This is a rebased version of https://lkml.org/lkml/2017/2/7/662 )
Python's CC and link Makefile variables were not passed to feature
detection, causing feature detection to use system's Python rather than
PYTHON_CONFIG's one. This created a mismatch between the detected Python
support and the one actually used by perf when PYTHON_CONFIG is
specified.
Fix it by moving Python's variable initialization to before feature
detection and pass FLAGS_PYTHON_EMBED to Python's feature detection's
build target.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-2-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The check between the hardware state and our shadow of it is
checked in the signal handler for all bounds exceptions,
even for the ones where we don't keep the shadow up2date.
This is a problem because when no shadow is kept the handler
fails at this point and hides the real reason of the
exception.
Move the check into the code-path evaluating normal bounds
exceptions to prevent this.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Link: http://lkml.kernel.org/r/1491488598-27346-1-git-send-email-joro@8bytes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- The move to support cross arch annotation introduced per arch
initialization requirements, fullfill them for s/390 (Christian Borntraeger)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Te4H
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.11-20170411' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull 'perf annotate' fix for s390:
- The move to support cross arch annotation introduced per arch
initialization requirements, fullfill them for s/390 (Christian Borntraeger)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When parsing disassemble lines for source line number, use a stripped
line instead of raw line.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1491612748-1605-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When parsing disassemble lines, use ltrim() and rtrim() to strip them,
not using just while loop and isspace().
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1491612748-1605-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pipe-mode has no perf.data header, hence no upfront knowledge of presend
and missing features, hence, do not print missing features in pipe-mode.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-8-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Session sets a number parameters that rely on evlist. These parameters
are not used in pipe-mode and should not be set, since evlist is
unavailable. Fix that.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-6-davidcc@google.com
[ Check if file != NULL in perf_session__new(), like when used by builtin-top.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate did not get some love for pipe-mode, and did not have
.attr and .buil_id setup (while record and inject did. Fix that.
It can easily be reproduced by:
perf record -o - noploop | perf annotate
that in my system shows:
0xd8 [0x28]: failed to process type: 9
Committer Testing:
Before:
$ perf record -o - stress -t 2 -c 2 | perf annotate --stdio
stress: info: [11060] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
0x4470 [0x28]: failed to process type: 9
$ stress: info: [11060] successful run completed in 2s
$
After:
$ perf record -o - stress -t 2 -c 2 | perf annotate --stdio
stress: info: [11871] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
stress: info: [11871] successful run completed in 2s
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
no symbols found in /usr/bin/stress, maybe install a debug package?
Percent | Source code & Disassembly of libc-2.24.so for cycles:uhH (6117 samples)
---------------------------------------------------------------------------------------
:
: Disassembly of section .text:
:
: 000000000003b050 <random_r>:
: __random_r():
10.56 : 3b050: test %rdi,%rdi
0.00 : 3b053: je 3b0d0 <random_r+0x80>
0.34 : 3b055: test %rsi,%rsi
0.00 : 3b058: je 3b0d0 <random_r+0x80>
0.46 : 3b05a: mov 0x18(%rdi),%eax
12.44 : 3b05d: mov 0x10(%rdi),%r8
0.18 : 3b061: test %eax,%eax
0.00 : 3b063: je 3b0b0 <random_r+0x60>
<SNIP>
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a minimal description of pipe's data format.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-4-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__perf_session__process_pipe_events reuses the same memory buffer to
process all events in the pipe.
When reordering is needed (e.g. -b option), events are not immediately
flushed, but kept around until reordering is possible, causing
memory corruption.
The problem is usually observed by a "Unknown sample error" output. It
can easily be reproduced by:
perf record -o - noploop | perf inject -b > output
Committer testing:
Before:
$ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null
stress: info: [8297] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
stress: info: [8297] successful run completed in 2s
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
Warning:
Found 1 unknown events!
Is this an older tool processing a perf.data file generated by a more recent tool?
If that is not the case, consider reporting to linux-kernel@vger.kernel.org.
$
After:
$ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null
stress: info: [9027] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
stress: info: [9027] successful run completed in 2s
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
no symbols found in /usr/bin/stress, maybe install a debug package?
no symbols found in /usr/bin/stress, maybe install a debug package?
$
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All paths following perf_session__process_event() in __cmd_inject() are
useless if __cmd_inject() is to fail, some depend on a correct
session->evlist.
First commit to add code that depends on session->evlist without checking
error was commmit e558a5bd8b ("perf inject: Work with files"). It has
grown since then.
Change __cmd_inject() to fail immediately after
perf_session__process_event() fails.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: e558a5bd8b ("perf inject: Work with files")
Link: http://lkml.kernel.org/r/20170410201432.24807-2-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement simple detection for all kind of jumps and branches.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-s390 <linux-s390@vger.kernel.org>
Cc: stable@kernel.org # v4.10+
Link: http://lkml.kernel.org/r/1491465112-45819-3-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
since 4.10 perf annotate exits on s390 with an "unknown error -95".
Turns out that commit 786c1b5184 ("perf annotate: Start supporting
cross arch annotation") added a hard requirement for architecture
support when objdump is used but only provided x86 and arm support.
Meanwhile power was added so lets add s390 as well.
While at it make sure to implement the branch and jump types.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-s390 <linux-s390@vger.kernel.org>
Cc: stable@kernel.org # v4.10+
Fixes: 786c1b5184 "perf annotate: Start supporting cross arch annotation"
Link: http://lkml.kernel.org/r/1491465112-45819-2-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't need to use strlen(), a var, or check for the end explicitely,
isspace('\0') is false:
[acme@jouet c]$ cat ltrim.c
#include <ctype.h>
#include <stdio.h>
static char *ltrim(char *s)
{
while (isspace(*s))
++s;
return s;
}
int main(void)
{
printf("ltrim(\"\")='%s'\n", ltrim(""));
return 0;
}
[acme@jouet c]$ ./ltrim
ltrim("")=''
[acme@jouet c]$
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/n/tip-w3nk0x3pai2vojk2ab6kdvaw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After reading command name from /proc/<pid>/status, use ltrim() and
rtrim() to strip command name, not using just while loop, isspace() and
etc.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1491575061-704-6-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Man page of mmap() says that portable applications should ensure fd
argument to be -1 if MAP_ANONYMOUS flag is set as below:
```
The mapping is not backed by any file; its contents are initialized to
zero. The fd and offset arguments are ignored; however, some
implementations require fd to be -1 if MAP_ANONYMOUS (or
MAP_ANON) is specified, and portable applications
should ensure this.
```
However, few mmap() calls under selftests/vm/ uses 0 as fd though they
use MAP_ANONYMOUS flag. This commit changes the argument to be -1 as
recommended.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The use of $$OUTPUT in the target shell commands resulted in an empty
string followed by an absolute path for which mkdir failed:
$ make -C tools/testing/selftests/futex
make: Entering directory '/home/dvhart/source/linux/linux-pdx86/tools/testing/selftests/futex'
Makefile:36: warning: overriding recipe for target 'clean'
../lib.mk:55: warning: ignoring old recipe for target 'clean'
for DIR in functional; do \
BUILD_TARGET=$OUTPUT/$DIR; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $DIR all;\
done
mkdir: cannot create directory ‘/functional’: Permission denied
Replace $$OUTPUT with $(OUTPUT) when referring to the Makefile OUTPUT
variable. The above make command now completes successfully.
Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Cc: linux-kselftest@vger.kernel.org
Cc: bamvor.zhangjian@huawei.com
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix to compare a zero-filled hexadecimal value with a part of
string of long hexadecimal value.
In check_types(), the last part of testcase compares with
the hex value formatted by "%x" with a part of a string of
long hex value (trimmed by tail -c and head -c). However,
if that part of long hex value contains zero (e.g. "05" of
"a3082059"), printf generated value (e.g. "5") is diffrent
string, and the test case failed.
To fix this, pass "%02x" instead of "%x" to printf.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
vm tests rely on shared memory settings. Enable system V IPC to run these
tests.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
test_bitmap, test_printf and prime_numbers are expected to be built as
modules.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When parsing {fore, back} ground color configs, use ltrim() instead of
just while loop and isspace().
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1491575061-704-4-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To strip csv output, use ltrim() instead of just while loop and
isspace() at print_metric_{only}_csv().
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1491575061-704-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel has a special check for a specific irq_vectors trace event.
TRACE_EVENT_PERF_PERM(irq_work_exit,
is_sampling_event(p_event) ? -EPERM : 0);
The perf-record fails for this irq_vectors event when it is present,
like when using a wildcard:
root@skl:/tmp# perf record -a -e irq_vectors:* sleep 2
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
>= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK
>= 1: Disallow CPU event access by users without CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
This patch prints out the exact sub event that failed with EPERM for
wildcards to help in understanding what went wrong when this event is
present:
After the patch:
root@skl:/tmp# perf record -a -e irq_vectors:* sleep 2
Error:
No permission to enable irq_vectors:irq_work_exit event.
You may not have permission to collect system-wide stats.
......
Committer notes:
So we have a lot of irq_vectors events:
[root@jouet ~]# perf list irq_vectors:*
List of pre-defined events (to be used in -e):
irq_vectors:call_function_entry [Tracepoint event]
irq_vectors:call_function_exit [Tracepoint event]
irq_vectors:call_function_single_entry [Tracepoint event]
irq_vectors:call_function_single_exit [Tracepoint event]
irq_vectors:deferred_error_apic_entry [Tracepoint event]
irq_vectors:deferred_error_apic_exit [Tracepoint event]
irq_vectors:error_apic_entry [Tracepoint event]
irq_vectors:error_apic_exit [Tracepoint event]
irq_vectors:irq_work_entry [Tracepoint event]
irq_vectors:irq_work_exit [Tracepoint event]
irq_vectors:local_timer_entry [Tracepoint event]
irq_vectors:local_timer_exit [Tracepoint event]
irq_vectors:reschedule_entry [Tracepoint event]
irq_vectors:reschedule_exit [Tracepoint event]
irq_vectors:spurious_apic_entry [Tracepoint event]
irq_vectors:spurious_apic_exit [Tracepoint event]
irq_vectors:thermal_apic_entry [Tracepoint event]
irq_vectors:thermal_apic_exit [Tracepoint event]
irq_vectors:threshold_apic_entry [Tracepoint event]
irq_vectors:threshold_apic_exit [Tracepoint event]
irq_vectors:x86_platform_ipi_entry [Tracepoint event]
irq_vectors:x86_platform_ipi_exit [Tracepoint event]
#
And some may be sampled:
[root@jouet ~]# perf record -e irq_vectors:local* sleep 20s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (2 samples) ]
[root@jouet ~]# perf report -D | egrep 'stats:|events:'
Aggregated stats:
TOTAL events: 155
MMAP events: 144
COMM events: 2
EXIT events: 1
SAMPLE events: 2
MMAP2 events: 4
FINISHED_ROUND events: 1
TIME_CONV events: 1
irq_vectors:local_timer_entry stats:
TOTAL events: 1
SAMPLE events: 1
irq_vectors:local_timer_exit stats:
TOTAL events: 1
SAMPLE events: 1
[root@jouet ~]#
But, as shown in the tracepoint definition at the start of this message,
some, like "irq_vectors:irq_work_exit", may not be sampled, just counted,
i.e. if we try to sample, as when using 'perf record', we get an error:
[root@jouet ~]# perf record -e irq_vectors:irq_work_exit
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
<SNIP>
The error message is misleading, this patch will help in pointing out
what is the event causing such an error, but the error message needs
improvement, i.e. we need to figure out a way to check if a tracepoint
is counting only, like this one, when all we can do is to count it with
'perf stat', at most printing the delta using interval printing, as in:
[root@jouet ~]# perf stat -I 5000 -e irq_vectors:irq_work_*
# time counts unit events
5.000168871 0 irq_vectors:irq_work_entry
5.000168871 0 irq_vectors:irq_work_exit
10.000676730 0 irq_vectors:irq_work_entry
10.000676730 0 irq_vectors:irq_work_exit
15.001122415 0 irq_vectors:irq_work_entry
15.001122415 0 irq_vectors:irq_work_exit
20.001298051 0 irq_vectors:irq_work_entry
20.001298051 0 irq_vectors:irq_work_exit
25.001485020 1 irq_vectors:irq_work_entry
25.001485020 1 irq_vectors:irq_work_exit
30.001658706 0 irq_vectors:irq_work_entry
30.001658706 0 irq_vectors:irq_work_exit
^C 32.045711878 0 irq_vectors:irq_work_entry
32.045711878 0 irq_vectors:irq_work_exit
[root@jouet ~]#
But at least, when we use a wildcard, this patch helps a bit.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1491566932-503-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's a conflict between ongoing level-5 paging support and
the E820 rewrite. Since the E820 rewrite is essentially ready,
merge it into x86/mm to reduce tree conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The E820 rework in WIP.x86/boot has gone through a couple of weeks
of exposure in -tip, merge it in a wider fashion.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY6mY1AAoJEHm+PkMAQRiGB14IAImsH28JPjxJVDasMIRPBxVc
euPPlZgoBieu7sNt+kEsEqdkXuu0MLk6gln0IGxWLeoB2S+u3Tz5LMa2YArVqV9Z
tWzOnI9auE73P2Pz/tUMOdyMs5tO0PolQxX3uljbULBozOHjHRh13fsXchX2yQvl
mFeFCDqpPV0KhWRH/ciA8uIHdvYPhMpkKgRtmR8jXL0yzqLp6+2J+Bs8nHG4NNng
HMVxZPC8jOE/TgWq6k/GmXgxh3H/AideFdHFbLKYnIFJW41ZGOI8a262zq3NmjPd
lywpVU7O7RMhSITY5PnuR3LpNV8ftw1hz2y6t35unyFK1P02adOSj5GJ3hGdhaQ=
=Xz5O
-----END PGP SIGNATURE-----
Backmerge tag 'v4.11-rc6' into drm-next
Linux 4.11-rc6
drm-misc needs 4.11-rc5, may as well fix conflicts with rc6.
o s/bpf_bpf_get_socket_cookie/bpf_get_socket_cookie
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Headed to stable:
- disable HFSCR[TM] if TM is not supported, fixes a potential host kernel crash
triggered by a hostile guest, but only in configurations that no one uses
- don't try to fix up misaligned load-with-reservation instructions
- fix flush_(d|i)cache_range() called from modules on little endian kernels
- add missing global TLB invalidate if cxl is active
- fix missing preempt_disable() in crc32c-vpmsum
And a fix for selftests build changes that went in this release:
- selftests/powerpc: Fix standalone powerpc build
Thanks to:
Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran, Paul Mackerras.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bTuf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.11:
Headed to stable:
- disable HFSCR[TM] if TM is not supported, fixes a potential host
kernel crash triggered by a hostile guest, but only in
configurations that no one uses
- don't try to fix up misaligned load-with-reservation instructions
- fix flush_(d|i)cache_range() called from modules on little endian
kernels
- add missing global TLB invalidate if cxl is active
- fix missing preempt_disable() in crc32c-vpmsum
And a fix for selftests build changes that went in this release:
- selftests/powerpc: Fix standalone powerpc build
Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
Paul Mackerras"
* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
powerpc/mm: Add missing global TLB invalidate if cxl is active
powerpc/64: Fix flush_(d|i)cache_range() called from modules
powerpc: Don't try to fix up misaligned load-with-reservation instructions
powerpc: Disable HFSCR[TM] if TM is not supported
selftests/powerpc: Fix standalone powerpc build
The commit 0775a9cbc6 ("usbip: vhci extension: modifications
to vhci driver") introduced multiple controllers, and nports as a sys
file, and claimed to read the nports from it, but it didn't.
In addition, the get_nports() has been so wrong that even with 8 port
lines for instance, it gets 7 (I am guessing it is due to a '\n' mess).
Nevertheless, we fix it by reading the nports attribute.
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
since 4.10 perf annotate exits on s390 with an "unknown error -95".
Turns out that commit 786c1b5184 ("perf annotate: Start supporting
cross arch annotation") added a hard requirement for architecture
support when objdump is used but only provided x86 and arm support.
Meanwhile power was added so lets add s390 as well.
While at it make sure to implement the branch and jump types.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-s390 <linux-s390@vger.kernel.org>
Cc: stable@kernel.org # v4.10+
Fixes: 786c1b5184 "perf annotate: Start supporting cross arch annotation"
Link: http://lkml.kernel.org/r/1491465112-45819-2-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
fix artifact of merge resolution
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mostly simple cases of overlapping changes (adding code nearby,
a function whose name changes, for example).
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add a generic testsuite for testing ethernet network device driver.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The option 'show-total-period' works fine without a option '-l'. But if
running 'perf annotate --stdio -l --show-total-period', you can see a
problem showing only zero '0' for number of samples.
Before:
$ perf annotate --stdio -l --show-total-period
...
0 : 400816: push %rbp
0 : 400817: mov %rsp,%rbp
0 : 40081a: mov %edi,-0x24(%rbp)
0 : 40081d: mov %rsi,-0x30(%rbp)
0 : 400821: mov -0x24(%rbp),%eax
0 : 400824: mov -0x30(%rbp),%rdx
0 : 400828: mov (%rdx),%esi
0 : 40082a: mov $0x0,%edx
...
The reason is it was missed to set number of samples of
source_line_samples, so set it ordinarily.
After:
$ perf annotate --stdio -l --show-total-period
...
3 : 400816: push %rbp
4 : 400817: mov %rsp,%rbp
0 : 40081a: mov %edi,-0x24(%rbp)
0 : 40081d: mov %rsi,-0x30(%rbp)
1 : 400821: mov -0x24(%rbp),%eax
2 : 400824: mov -0x30(%rbp),%rdx
0 : 400828: mov (%rdx),%esi
1 : 40082a: mov $0x0,%edx
...
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liska <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1490703125-13643-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callers of perf_read_values__enlarge_counters() already propagate
errors, so just print some debug diagnostics and handle allocation
failures gracefully, not trying to do silly things like 'a =
realloc(a)'.
Link: http://lkml.kernel.org/n/tip-nsmmh7uzpg35rzcl9nq7yztp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a kretprobe is installed on a kernel function, there is a maximum
limit of how many calls in parallel it can catch (aka "maxactive"). A
kernel module could call register_kretprobe() and initialize maxactive
(see example in samples/kprobes/kretprobe_example.c).
But that is not exposed to userspace and it is currently not possible to
choose maxactive when writing to /sys/kernel/debug/tracing/kprobe_events
The default maxactive can be as low as 1 on single-core with a
non-preemptive kernel. This is too low and we need to increase it not
only for recursive functions, but for functions that sleep or resched.
This patch updates the format of the command that can be written to
kprobe_events so that maxactive can be optionally specified.
I need this for a bpf program attached to the kretprobe of
inet_csk_accept, which can sleep for a long time.
This patch includes a basic selftest:
> # ./ftracetest -v test.d/kprobe/
> === Ftrace unit tests ===
> [1] Kprobe dynamic event - adding and removing [PASS]
> [2] Kprobe dynamic event - busy event check [PASS]
> [3] Kprobe dynamic event with arguments [PASS]
> [4] Kprobes event arguments with types [PASS]
> [5] Kprobe dynamic event with function tracer [PASS]
> [6] Kretprobe dynamic event with arguments [PASS]
> [7] Kretprobe dynamic event with maxactive [PASS]
>
> # of passed: 7
> # of failed: 0
> # of unresolved: 0
> # of untested: 0
> # of unsupported: 0
> # of xfailed: 0
> # of undefined(test bug): 0
BugLink: https://github.com/iovisor/bcc/issues/1072
Link: http://lkml.kernel.org/r/1491215782-15490-1-git-send-email-alban@kinvolk.io
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull perf/core improvements from Andi Kleen:
This pull requests contains updates to the Intel PMU events JSON files,
plus two one liner code fixes for the JSON files (also appended as patch)
The most remarkable change is support for Sandy Bridge to Skylake
client uncore event list support.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SDT marker argument is in N@OP format. Here OP is arch dependent
component. Add powerpc logic to parse OP and convert it to uprobe
compatible format.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170328094754.3156-4-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
this l4lb demo is a comprehensive test case for LLVM codegen and
kernel verifier. It's using fully inlined jhash(), complex packet
parsing and multiple map lookups of different types to stress
llvm and verifier.
The map sizes, map population and test vectors are artificial to
exercise different paths through the bpf program.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add C test for xdp_adjust_head(), packet rewrite and map lookups
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add simple C test case for llvm and verifier range check fix from
commit b1977682a3 ("bpf: improve verifier packet range checks")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
expose bpf_program__set_type() to set program type
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add support for BPF_PROG_TEST_RUN command to libbpf.a
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a couple of test cases, for example, probing for xadd on a spilled
pointer to packet and map_value_adj register, various other map_value_adj
tests including the unaligned load/store, and trying out pointer arithmetic
on map_value_adj register itself. For the unaligned load/store, we need
to figure out whether the architecture has efficient unaligned access and
need to mark affected tests accordingly.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
New features:
- Beautify the statx syscall arguments in 'perf trace' (Arnaldo Carvalho de Melo)
e.g.:
System wide strace like session:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
36050.891 ( 0.007 ms): statx/4576 statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
^C#
User visible:
- Handle unpaired raw_syscalls:sys_exit events in 'perf trace', i.e. we
shouldn't try to calculate duration or print the timestamp for a missing
matching raw_syscalls:sys_enter (Arnaldo Carvalho de Melo)
- Do not print "cycles: 0" in perf report LBR lines in platforms not
supporting 'cycles', such as Intel's Broadwell (Jin Yao)
- Handle missing $HOME env var (Jiri Olsa)
- Map 8-bit registers (al, bl, etc), not supported in uprobes_events, to
the next best thing (ax, bx, etc) supported (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=cpqq
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170331' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Beautify the statx syscall arguments in 'perf trace' (Arnaldo Carvalho de Melo)
e.g.:
System wide strace like session:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
36050.891 ( 0.007 ms): statx/4576 statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
^C#
User visible changes:
- Handle unpaired raw_syscalls:sys_exit events in 'perf trace', i.e. we
shouldn't try to calculate duration or print the timestamp for a missing
matching raw_syscalls:sys_enter (Arnaldo Carvalho de Melo)
- Do not print "cycles: 0" in perf report LBR lines in platforms not
supporting 'cycles', such as Intel's Broadwell (Jin Yao)
- Handle missing $HOME env var (Jiri Olsa)
- Map 8-bit registers (al, bl, etc), not supported in uprobes_events, to
the next best thing (ax, bx, etc) supported (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we fail in the following case:
$ unset HOME
$ ./perf record ls
$ echo $?
255
It's because the config code init fails due to a missing HOME variable
value. Fix this by skipping the user config init if there's no HOME
variable value.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170330144637.7468-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need it to build tools/perf/trace/beauty/statx.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nin41ve2fa63lrfbdr6x57yr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a missing space in the JSON description after the uncore unit
Before:
perf list
...
unc_arb_coh_trk_requests.all
[Unit: uncore_arbNumber of entries allocated. Account for Any type: e.g. Snoop, Core aperture, etc]
...
After:
unc_arb_coh_trk_requests.all
[Unit: uncore_arb Number of entries allocated. Account for Any type: e.g. Snoop, Core aperture, etc]
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/n/tip-p989c7x9kaiy2bnkmgpo6cvt@git.kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
An earlier update removed the UNC_M_CLOCKTICKS event for Broadwell DE.
But Metric events were still referring to it.
This adds it back under a different name from the event list,
and also fixes up the Metric events to use the new name.
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/n/tip-zxxzg4g5nr93o7np00vgqqwm@git.kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Trivial fix to spelling mistake in pr_debug message.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170330095440.19444-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Which may happen when we start a tracing session and a thread is waiting
for something like "poll" to return, in which case we better print "?"
both for the syscall entry timestamp and for the duration.
E.g.:
Tracing existing mutt session:
# perf trace -p `pidof mutt`
? ( ? ): mutt/17135 ... [continued]: poll()) = 1
0.027 ( 0.013 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1
0.047 ( 0.008 ms): mutt/17135 poll(ufds: 0x7ffcb3c42c50, nfds: 1, timeout_msecs: 1000) = 1
0.059 ( 0.008 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1
<SNIP>
Before it would print a large number because we'd do:
ttrace->entry_time - trace->base_time
And entry_time would be 0, while base_time would be the timestamp for
the first event 'perf trace' reads, oops.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Claudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wbcb93ofva2qdjd5ltn5eeqq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add column '%Total' next to 'Total' for easier comparison of numbers between
hosts.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Provide an interactive command to reset the tracepoint statistics.
Requires some extra work for debugfs, as the counters cannot be reset.
On the up side, this offers us the opportunity to have debugfs values
reset on startup and whenever a filter is modified, becoming consistent
with the tracepoint provider. As a bonus, 'kvmstat -dt' will now provide
useful output, instead of mixing values in totally different orders of
magnitude.
Furthermore, we avoid unnecessary resets when any of the filters is
"changed" interactively to the previous value.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Provide a real simple way to erase any active filter.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Add a new option '-g'/'--guest' to select a particular process by providing
the QEMU guest name.
Notes:
- The logic to figure out the pid corresponding to the guest name might look
scary, but works pretty reliably in practice; in the unlikely event that it
returns add'l flukes, it will bail out and hint at using '-p' instead, no
harm done.
- Mixing '-g' and '-p' is possible, and the final instance specified on the
command line is the significant one. This is consistent with current
behavior for '-p' which, if specified multiple times, also regards the final
instance as the significant one.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Behavior on empty/0 input for regex and pid filtering was inconsistent, as
the former would keep the current filter, while the latter would (naturally)
remove any pid filtering.
Make things consistent by falling back to the default filter on empty input
for the regex filter dialogue.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
If a user defines a regex filter through the interactive command, display
the active regex in the header's second line.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Print helpful messages in case users enter invalid input or invalid pids in
the interactive pid filter dialogue.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Improve consistency in the interactive dialogue for pid filtering by
removing any filters on empty input (in addition to entering 0).
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When running kvm_stat with option '-p' to filter per process, display
the QEMU guest name next to the pid, if available.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-By: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Apart from the source code, there does not seem to be a place that documents
the interactive capabilities of kvm_stat yet.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Whenever a user adds a filter, we
* redraw the header immediately for a snappy response
* print a message indicating to the user that we're busy while the
noticeable delay induced by updating all of the stats objects takes place
* update the statistics ASAP (i.e. after 0.25s instead of 3s) to be
consistent with behavior on startup
To do so, we split the Tui's refresh() method to allow for drawing header
and stats separately, and trigger a header refresh whenever we are about
to do something that takes a while - like updating filters.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Provides all missing empty lines as required for full PEP compliance.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Updating the fields of the TracepointProvider does not propagate changes to the
tracepoints. This shows when a pid filter is enabled, whereby subsequent
extensions of the fields of the Tracepoint provider (e.g. by toggling
drilldown) will not modify the tracepoints as required.
To reproduce, select a specific process via interactive command 'p', and
enable drilldown via 'x' - none of the fields with the braces will appear
although they should.
The fix will always leave all available fields in the TracepointProvider
enabled.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Based-on-text-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Addresses
- eliminate extra import
- missing variable initialization
- type redefinition from int to float
- passing of int type argument instead of string
- a couple of PEP8-reported indentation/formatting glitches
- remove unused variable drilldown in class Tui
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
SIGINT causes ugly unhandled exceptions in log and batch mode, which we
prevent by catching the exceptions accordingly.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The previous version was catching all exceptions, including SIGINT.
We only want to catch the curses exceptions here.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When running kvm_stat in interactive mode, the cursor appears at the lower
left corner, which looks a bit distracting.
This patch hides the cursor by turning it invisible.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
For some platforms, for example Broadwell, it doesn't support cycles
for LBR. But the perf always prints cycles:0, it's not necessary.
The patch refactors the LBR info print code and drops the cycles:0.
For example: perf report --branch-history --no-children --stdio
On Broadwell:
--0.91%--__random_r random_r.c:394 (iterations:2)
__random_r random_r.c:360 (predicted:0.0%)
__random_r random_r.c:380 (predicted:0.0%)
__random_r random_r.c:357
On Skylake:
--1.07%--main div.c:39 (predicted:52.4% cycles:1 iterations:17)
main div.c:44 (predicted:52.4% cycles:1)
main div.c:42 (cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (cycles:1)
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1489046786-10061-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SDT marker argument is in N@OP format. N is the size of argument and OP
is the actual assembly operand. OP is arch dependent component and hence
it's parsing logic also should be placed under tools/perf/arch/.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170328094754.3156-3-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found couple of events using al, bl, cl and dl registers for argument.
These are not directly accepted by uprobe_events and thus needs to be
mapped to ax, bx, cx and dx respectively.
Few ex,
/usr/bin/qemu-system-s390x
css_adapter_interrupt: 1@%bl
css_chpid_add: 1@%cl 1@%sil 1@%dl
dma_bdrv_io: 8@%rbx 8@%rbp -8@%r14 1@%al
/usr/bin/postgres
buffer__read__done: ... -1@-bash -1@%al
buffer__read__start: ... -1@%al
I don't find any sdt events using ah, bh,... registers. But I also don't
see any reason to not use them, so there might be rare events using
these registers, and if so, perf should have a renaming logic for them
too.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170328094754.3156-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This came from 'git', but isn't documented anywhere in
tools/perf/Documentation/, looks like baggage we can do without, ditch
it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e7uwkn60t4hmlnwj99ba4t2s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY2C9qAAoJEHm+PkMAQRiGaBQIAIGzdlZ6ImiP6zoukrRv7qUr
44ITm0lsBiL85QGedhQQL+Y9UqwUmlqgFqnH0Gr8YHNbLJWXzdjGbl5aVo4KjASq
104NLUDXtPww/xZdH4wJMzhuwucYwZOUyDOjOr0ak3cGxOE2xjNjHMZXxWUf20GO
EpRr6WhV1DUAvAdjdNa9KlcOjMluNpMLLyL1CFLjrkkArrWAyqOURKHAb6ZLghfv
iZV1qJTVPyYGpnlI3kuEgu2GuDjxqpoNLSr3wHyEHm/pBPEl7MX6zPbzcegBV8TY
cRRlXo4notdsuknmSNcj0hHuTQvw1kl7BhieLKVsnCyCIM6jjX4TSQZFutmbzwM=
=5iRl
-----END PGP SIGNATURE-----
Backmerge tag 'v4.11-rc4' into drm-next
Linux 4.11-rc4
The i915 GVT team need the rc4 code to base some more code on.
New features:
- Handle inline functions in callchains (Jin Yao)
- Enable sorting by srcline as key (Milian Wolff)
Fixes:
- Fix no_size logic in addr_filter__resolve_kernel_syms() in the
auxtrace code (Adrian Hunter)
- Fix some thread refcount leaks in 'perf trace' (Arnaldo Carvalho de Melo)
- Fix divide by zero when calculating percent for an event in a group in
the annotate by source line code (Taeung Song)
- build-id files now aren't anymore symlinks, their parent directories
are, so readlink the later (Taeung Song)
- Assorted fixes for null termination problems, mostly related to
readlink, detected by valgrind (Tommi Rantala)
Infrastructure:
- Make vfs_getname probe point logic in 'perf trace' more robust
wrt length of pathname (Arnaldo Carvalho de Melo)
- Remove unused 'prefix' parameter from builtins main functions (Arnaldo Carvalho de Melo)
- Show 'perf list sdt' option in man page (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Lm/M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170327' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Handle inline functions in callchains (Jin Yao)
- Enable sorting by srcline as key (Milian Wolff)
Fixes:
- Fix no_size logic in addr_filter__resolve_kernel_syms() in the
auxtrace code (Adrian Hunter)
- Fix some thread refcount leaks in 'perf trace' (Arnaldo Carvalho de Melo)
- Fix divide by zero when calculating percent for an event in a group in
the annotate by source line code (Taeung Song)
- build-id files now aren't anymore symlinks, their parent directories
are, so readlink the later (Taeung Song)
- Assorted fixes for null termination problems, mostly related to
readlink, detected by valgrind (Tommi Rantala)
Infrastructure changes:
- Make vfs_getname probe point logic in 'perf trace' more robust
wrt length of pathname (Arnaldo Carvalho de Melo)
- Remove unused 'prefix' parameter from builtins main functions (Arnaldo Carvalho de Melo)
- Show 'perf list sdt' option in man page (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Simplification: it is easier to open /proc/self/exe than /proc/$pid/exe.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-7-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure that the string that we read from the data file is null terminated.
Valgrind was complaining:
==31357== Invalid read of size 1
==31357== at 0x4EC8C1: __strtok_r_1c (string2.h:200)
==31357== by 0x4EC8C1: parse_ftrace_printk (trace-event-parse.c:161)
==31357== by 0x4F82A8: read_ftrace_printk (trace-event-read.c:204)
==31357== by 0x4F82A8: trace_report (trace-event-read.c:468)
==31357== by 0x4CD552: process_tracing_data (header.c:1576)
==31357== by 0x4D3397: perf_file_section__process (header.c:2705)
==31357== by 0x4D3397: perf_header__process_sections (header.c:2488)
==31357== by 0x4D3397: perf_session__read_header (header.c:2925)
==31357== by 0x4E71E2: perf_session__open (session.c:32)
==31357== by 0x4E71E2: perf_session__new (session.c:139)
==31357== by 0x429F5D: cmd_annotate (builtin-annotate.c:472)
==31357== by 0x497150: run_builtin (perf.c:359)
==31357== by 0x428CE0: handle_internal_command (perf.c:421)
==31357== by 0x428CE0: run_argv (perf.c:467)
==31357== by 0x428CE0: main (perf.c:614)
==31357== Address 0x8ac0efb is 0 bytes after a block of size 1,963 alloc'd
==31357== at 0x4C2DB9D: malloc (vg_replace_malloc.c:299)
==31357== by 0x4F827B: read_ftrace_printk (trace-event-read.c:195)
==31357== by 0x4F827B: trace_report (trace-event-read.c:468)
==31357== by 0x4CD552: process_tracing_data (header.c:1576)
==31357== by 0x4D3397: perf_file_section__process (header.c:2705)
==31357== by 0x4D3397: perf_header__process_sections (header.c:2488)
==31357== by 0x4D3397: perf_session__read_header (header.c:2925)
==31357== by 0x4E71E2: perf_session__open (session.c:32)
==31357== by 0x4E71E2: perf_session__new (session.c:139)
==31357== by 0x429F5D: cmd_annotate (builtin-annotate.c:472)
==31357== by 0x497150: run_builtin (perf.c:359)
==31357== by 0x428CE0: handle_internal_command (perf.c:421)
==31357== by 0x428CE0: run_argv (perf.c:467)
==31357== by 0x428CE0: main (perf.c:614)
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-6-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure that we have space for the null byte in buf.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-5-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure that the string in buf is null terminated.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-4-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Valgrind was complaining:
$ valgrind ./perf list >/dev/null
==11643== Memcheck, a memory error detector
==11643== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==11643== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info
==11643== Command: ./perf list
==11643==
==11643== Conditional jump or move depends on uninitialised value(s)
==11643== at 0x4C30620: rindex (vg_replace_strmem.c:199)
==11643== by 0x49DAA9: build_id_cache__origname (build-id.c:198)
==11643== by 0x49E1C7: build_id_cache__valid_id (build-id.c:222)
==11643== by 0x49E1C7: build_id_cache__list_all (build-id.c:507)
==11643== by 0x4B9C8F: print_sdt_events (parse-events.c:2067)
==11643== by 0x4BB0B3: print_events (parse-events.c:2313)
==11643== by 0x439501: cmd_list (builtin-list.c:53)
==11643== by 0x497150: run_builtin (perf.c:359)
==11643== by 0x428CE0: handle_internal_command (perf.c:421)
==11643== by 0x428CE0: run_argv (perf.c:467)
==11643== by 0x428CE0: main (perf.c:614)
[...]
Additionally, a zero length result from readlink() is not very interesting.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-3-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Valgrind was complaining:
==2633== Syscall param open(filename) points to unaddressable byte(s)
==2633== at 0x5281CC0: __open_nocancel (syscall-template.S:84)
==2633== by 0x537D38: open (fcntl2.h:53)
==2633== by 0x537D38: get_sdt_note_list (symbol-elf.c:2017)
==2633== by 0x5396FD: probe_cache__scan_sdt (probe-file.c:700)
==2633== by 0x49EA2C: build_id_cache__add_sdt_cache (build-id.c:625)
==2633== by 0x49EA2C: build_id_cache__add_s (build-id.c:697)
==2633== by 0x49EE72: build_id_cache__add_b (build-id.c:717)
==2633== by 0x49EE72: dso__cache_build_id (build-id.c:782)
==2633== by 0x49F190: __dsos__cache_build_ids (build-id.c:793)
==2633== by 0x49F190: machine__cache_build_ids (build-id.c:801)
==2633== by 0x49F190: perf_session__cache_build_ids (build-id.c:815)
==2633== by 0x4CD4F2: write_build_id (header.c:165)
==2633== by 0x4D26F7: do_write_feat (header.c:2296)
==2633== by 0x4D26F7: perf_header__adds_write (header.c:2335)
==2633== by 0x4D26F7: perf_session__write_header (header.c:2414)
==2633== by 0x43B324: __cmd_record (builtin-record.c:1154)
==2633== by 0x43B324: cmd_record (builtin-record.c:1839)
==2633== by 0x455A07: __cmd_record (builtin-kmem.c:1868)
==2633== by 0x455A07: cmd_kmem (builtin-kmem.c:1944)
==2633== by 0x497150: run_builtin (perf.c:359)
==2633== by 0x428CE0: handle_internal_command (perf.c:421)
==2633== by 0x428CE0: run_argv (perf.c:467)
==2633== by 0x428CE0: main (perf.c:614)
==2633== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lkml.kernel.org/r/20170322130624.21881-2-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is wrong way to read link name from a build-id file. Because a
build-id file is not anymore a symbolic link but build-id directory of
it is symbolic link, so fix it.
For example, if build-id file name gotten from
dso__build_id_filename() is as below,
/root/.debug/.build-id/4f/75c7d197c951659d1c1b8b5fd49bcdf8f3f8b1/elf
To correctly read link name of build-id, use the build-id dir path that
is a symbolic link, instead of the above build-id file name like below.
/root/.debug/.build-id/4f/75c7d197c951659d1c1b8b5fd49bcdf8f3f8b1
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1490598638-13947-2-git-send-email-treeze.taeung@gmail.com
Fixes: 01412261d9 ("perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Often it is interesting to know how costly a given source line is in
total. Previously, one had to build these sums manually based on all
addresses that pointed to the same source line. This patch introduces
srcline as a sort key, which will do the aggregation for us.
Paired with the recent addition of showing inline frames, this makes
perf report much more useful for many C++ work loads.
The following shows the new feature in action. First, let's show the
status quo output when we sort by address. The result contains many hist
entries that generate the same output:
~~~~~~~~~~~~~~~~
$ perf report --stdio --inline -g address
# Children Self Command Shared Object Symbol
# ........ ........ ............ ................... .........................................
#
99.89% 35.34% cpp-inlining cpp-inlining [.] main
|
|--64.55%--main complex:655
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/complex:664 (inline)
| |
| |--60.31%--hypot +20
| | |
| | |--8.52%--__hypot_finite +273
| | |
| | |--7.32%--__hypot_finite +411
...
--35.34%--_start +4194346
__libc_start_main +241
|
|--6.65%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
|
|--2.70%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
|
|--1.69%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
...
~~~~~~~~~~~~~~~~
With this patch and `-g srcline` we instead get the following output:
~~~~~~~~~~~~~~~~
$ perf report --stdio --inline -g srcline
# Children Self Command Shared Object Symbol
# ........ ........ ............ ................... .........................................
#
99.89% 35.34% cpp-inlining cpp-inlining [.] main
|
|--64.55%--main complex:655
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/complex:664 (inline)
| |
| |--64.02%--hypot
| | |
| | --59.81%--__hypot_finite
| |
| --0.53%--cabs
|
--35.34%--_start
__libc_start_main
|
|--12.48%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
...
~~~~~~~~~~~~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170318214928.9047-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the address belongs to an inlined function, the source information
back to the first non-inlined function will be printed.
For example:
1. Show inlined function name
perf report -g function --inline
- 0.69% 0.00% inline ld-2.23.so [.] dl_main
- dl_main
0.56% _dl_relocate_object
_dl_relocate_object (inline)
elf_dynamic_do_Rela (inline)
2. Show the file/line information
perf report -g address --inline
- 0.69% 0.00% inline ld-2.23.so [.] _dl_start
_dl_start rtld.c:307
/build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
+ _dl_sysdep_start dl-sysdep.c:250
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It takes some time to look for inline stack for callgraph addresses. So
it provides new option "--inline" to let user decide if enable this
feature.
--inline:
If a callgraph address belongs to an inlined function, the inline stack
will be printed. Each entry is the inline function name or file/line.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It would be useful for perf to support a mode to query the inline stack
for a given callgraph address. This would simplify finding the right
code in code that does a lot of inlining.
The srcline.c has contained the code which supports to translate the
address to filename:line_nr. This patch just extends the function to let
it support getting the inline stacks.
It introduces the inline_list which will store the inline function
result (filename:line_nr and funcname).
If BFD lib is not supported, the result is only filename:line_nr.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce dso__name() and filename_split() out of existing code because
these codes will be used in several places in next patch.
For filename_split(), it may also solve a potential memory leak in
existing code. In existing addr2line(),
sep = strchr(filename, ':');
if (sep) {
*sep++ = '\0';
*file = filename;
*line_nr = strtoul(sep, NULL, 0);
ret = 1;
}
out:
pclose(fp);
return ret;
If sep is NULL, filename is not freed or returned via file.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
prefix = NULL;
if (p->option & RUN_SETUP)
prefix = NULL; /* setup_perf_directory(); */
Ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 40218daea1 ("perf list: Show SDT and pre-cached events") added
sdt support in perf list, but it missed to update documentation.
Show sdt option in man perf-list.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170327025538.1753-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Address filtering with kernel symbols incorrectly resulted in the error
"Cannot determine size of symbol" because the no_size logic was the wrong
way around.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org # v4.9+
Link: http://lkml.kernel.org/r/1490357752-27942-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This resolves a merge issue in the gadget code, and we want the USB
fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The changes to enable building with a separate output directory, in
commit a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT") broke
building the powerpc selftests on their own, eg:
$ cd tools/testing/selftests/powerpc; make
It was partially fixed in commit e53aff45c4 ("selftests: lib.mk Fix
individual test builds"), which defined OUTPUT for standalone tests. But
that only defines OUTPUT within the Makefile, the value is not exported
so sub-shells can't see it. We could export OUTPUT, but it's actually
cleaner to just expand the value of OUTPUT before we invoke the shell.
Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
llvm can optimize the 'if (ptr > data_end)' checks to be in the order
slightly different than the original C code which will confuse verifier.
Like:
if (ptr + 16 > data_end)
return TC_ACT_SHOT;
// may be followed by
if (ptr + 14 > data_end)
return TC_ACT_SHOT;
while llvm can see that 'ptr' is valid for all 16 bytes,
the verifier could not.
Fix verifier logic to account for such case and add a test.
Reported-by: Huapeng Zhou <hzhou@fb.com>
Fixes: 969bf05eb3 ("bpf: direct packet access")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In trace__vfs_getname() and when checking if a thread is filtered in
trace__process_sample() we were not dropping the reference obtained via
machine__findnew_thread(), fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9gc470phavxwxv5d9w7ck8ev@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It shouldn't be zero, but if the 'perf probe' on getname_flags() (or
elsewhere in the future we need to probe to catch the pathname for
syscalls like 'open' being copied from userspace to the kernel) is
misplaced somehow, then we will end up not allocating space and trying
to copy the "" empty string to ttrace->filename.name, causing a
segfault, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c4f1t6sx1nczuzop19r5si5s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are repeated compiler flags "-Wall" in the Makefile.
The redundant compiler flag appears to have been there from the
introduction of the Makefile.
Signed-off-by: Chijun Sima <simachijun@qq.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fix some spelling typos found in printk.
[jkosina@suse.cz: drop arch/arm64/kernel/hibernate.c that was already
in place]
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Returns the owner uid of the socket inside a sk_buff. This is useful to
perform per-UID accounting of network traffic or per-UID packet
filtering. The socket need to be a fullsock otherwise overflowuid is
returned.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
