Commit Graph

276 Commits

Author SHA1 Message Date
Jiri Pirko
c496daeb86 devlink: remove duplicate port notification
The notification about created port is send from devl_port_register()
function called from ops->port_new(). No need to send it again here,
so remove the call and the helper function.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-24 10:34:26 +01:00
Jiri Pirko
94ba1c316b devlink: fix the name of value arg of devl_param_driverinit_value_get()
Probably due to copy-paste error, the name of the arg is "init_val"
which is misleading, as the pointer is used to point to struct where to
store the current value. Rename it to "val" and change the arg comment
a bit on the way.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13 09:49:14 +00:00
Jiri Pirko
afd888c3e1 devlink: make sure driver does not read updated driverinit param before reload
The driverinit param purpose is to serve the driver during init/reload
time to provide a value, either default or set by user.

Make sure that driver does not read value updated by user before the
reload is performed. Hold the new value in a separate struct and switch
it during reload.

Note that this is required to be eventually possible to call
devl_param_driverinit_value_get() without holding instance lock.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13 09:49:14 +00:00
Jiri Pirko
fb8421a94c devlink: remove devlink features
Devlink features were introduced to disallow devlink reload calls of
userspace before the devlink was fully initialized. The reason for this
workaround was the fact that devlink reload was originally called
without devlink instance lock held.

However, with recent changes that converted devlink reload to be
performed under devlink instance lock, this is redundant so remove
devlink features entirely.

Note that mlx5 used this to enable devlink reload conditionally only
when device didn't act as multi port slave. Move the multi port check
into mlx5_devlink_reload_down() callback alongside with the other
checks preventing the device from reload in certain states.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-30 08:37:46 +00:00
Jiri Pirko
075935f0ae devlink: protect devlink param list by instance lock
Commit 1d18bb1a4d ("devlink: allow registering parameters after
the instance") as the subject implies introduced possibility to register
devlink params even for already registered devlink instance. This is a
bit problematic, as the consistency or params list was originally
secured by the fact it is static during devlink lifetime. So in order to
protect the params list, take devlink instance lock during the params
operations. Introduce unlocked function variants and use them in drivers
in locked context. Put lock assertions to appropriate places.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27 12:32:02 +00:00
Jiri Pirko
85fe0b324c devlink: make devlink_param_driverinit_value_set() return void
devlink_param_driverinit_value_set() currently returns int with possible
error, but no user is checking it anyway. The only reason for a fail is
a driver bug. So convert the function to return void and put WARN_ONs
on error paths.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27 12:32:02 +00:00
Jiri Pirko
020dd127a3 devlink: make devlink_param_register/unregister static
There is no user outside the devlink code, so remove the export and make
the functions static. Move them before callers to avoid forward
declarations.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27 12:32:02 +00:00
Jiri Pirko
9f167327ef devlink: remove devl*_port_health_reporter_destroy()
Remove port-specific health reporter destroy function as it is
currently the same as the instance one so no longer needed. Inline
__devlink_health_reporter_destroy() as it is no longer called from
multiple places.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19 19:08:37 -08:00
Jiri Pirko
1dea3b4e4c devlink: remove reporters_lock
Similar to other devlink objects, rely on devlink instance lock
and remove object specific reporters_lock.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19 19:08:37 -08:00
Jiri Pirko
dfdfd1305d devlink: protect health reporter operation with instance lock
Similar to other devlink objects, protect the reporters list
by devlink instance lock. Alongside add unlocked versions
of health reporter create/destroy functions and use them in drivers
on call paths where the instance lock is held.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19 19:08:37 -08:00
Jiri Pirko
5cc9049cb9 devlink: remove linecards lock
Similar to other devlink objects, convert the linecards list to be
protected by devlink instance lock. Alongside with that rename the
create/destroy() functions to devl_* to indicate the devlink instance
lock needs to be held while calling them.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19 19:08:37 -08:00
Jakub Kicinski
9053637e0d devlink: remove the registration guarantee of references
The objective of exposing the devlink instance locks to
drivers was to let them use these locks to prevent user space
from accessing the device before it's fully initialized.
This is difficult because devlink_unregister() waits for all
references to be released, meaning that devlink_unregister()
can't itself be called under the instance lock.

To avoid this issue devlink_register() was moved after subobject
registration a while ago. Unfortunately the netdev paths get
a hold of the devlink instances _before_ they are registered.
Ideally netdev should wait for devlink init to finish (synchronizing
on the instance lock). This can't work because we don't know if the
instance will _ever_ be registered (in case of failures it may not).
The other option of returning an error until devlink_register()
is called is unappealing (user space would get a notification
netdev exist but would have to wait arbitrary amount of time
before accessing some of its attributes).

Weaken the guarantees of the devlink references.

Holding a reference will now only guarantee that the memory
of the object is around. Another way of looking at it is that
the reference now protects the object not its "registered" status.
Use devlink instance lock to synchronize unregistration.

This implies that releasing of the "main" reference of the devlink
instance moves from devlink_unregister() to devlink_free().

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-06 12:56:19 +00:00
Vincent Mailhol
01d8053229 net: devlink: add DEVLINK_INFO_VERSION_GENERIC_FW_BOOTLOADER
As discussed in [1], abbreviating the bootloader to "bl" might not be
well understood. Instead, a bootloader technically being a firmware,
name it "fw.bootloader".

Add a new macro to devlink.h to formalize this new info attribute name
and update the documentation.

[1] https://lore.kernel.org/netdev/20221128142723.2f826d20@kernel.org/

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221130174658.29282-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-12-12 11:39:13 +01:00
Shay Drory
a8ce7b26a5 devlink: Expose port function commands to control migratable
Expose port function commands to enable / disable migratable
capability, this is used to set the port function as migratable.

Live migration is the process of transferring a live virtual machine
from one physical host to another without disrupting its normal
operation.

In order for a VM to be able to perform LM, all the VM components must
be able to perform migration. e.g.: to be migratable.
In order for VF to be migratable, VF must be bound to VFIO driver with
migration support.

When migratable capability is enabled for a function of the port, the
device is making the necessary preparations for the function to be
migratable, which might include disabling features which cannot be
migrated.

Example of LM with migratable function configuration:
Set migratable of the VF's port function.

$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
    function:
        hw_addr 00:00:00:00:00:00 migratable disable

$ devlink port function set pci/0000:06:00.0/2 migratable enable

$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
    function:
        hw_addr 00:00:00:00:00:00 migratable enable

Bind VF to VFIO driver with migration support:
$ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/unbind
$ echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:08:00.0/driver_override
$ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/bind

Attach VF to the VM.
Start the VM.
Perform LM.

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07 20:09:18 -08:00
Shay Drory
da65e9ff3b devlink: Expose port function commands to control RoCE
Expose port function commands to enable / disable RoCE, this is used to
control the port RoCE device capabilities.

When RoCE is disabled for a function of the port, function cannot create
any RoCE specific resources (e.g GID table).
It also saves system memory utilization. For example disabling RoCE enable a
VF/SF saves 1 Mbytes of system memory per function.

Example of a PCI VF port which supports function configuration:
Set RoCE of the VF's port function.

$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
    function:
        hw_addr 00:00:00:00:00:00 roce enable

$ devlink port function set pci/0000:06:00.0/2 roce disable

$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
    function:
        hw_addr 00:00:00:00:00:00 roce disable

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07 20:09:18 -08:00
Vincent Mailhol
226bf98055 net: devlink: let the core report the driver name instead of the drivers
The driver name is available in device_driver::name. Right now,
drivers still have to report this piece of information themselves in
their devlink_ops::info_get callback function.

In order to factorize code, make devlink_nl_info_fill() add the driver
name attribute.

Now that the core sets the driver name attribute, drivers are not
supposed to call devlink_info_driver_name_put() anymore. Remove
devlink_info_driver_name_put() and clean-up all the drivers using this
function in their callback.

Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw
Reviewed-by: Jacob Keller  <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30 21:49:38 -08:00
Jacob Keller
af6397c9ee devlink: support directly reading from region memory
To read from a region, user space must currently request a new snapshot of
the region and then read from that snapshot. This can sometimes be overkill
if user space only reads a tiny portion. They first create the snapshot,
then request a read, then destroy the snapshot.

For regions which have a single underlying "contents", it makes sense to
allow supporting direct reading of the region data.

Extend the DEVLINK_CMD_REGION_READ to allow direct reading from a region if
requested via the new DEVLINK_ATTR_REGION_DIRECT. If this attribute is set,
then perform a direct read instead of using a snapshot. Direct read is
mutually exclusive with DEVLINK_ATTR_REGION_SNAPSHOT_ID, and care is taken
to ensure that we reject commands which provide incorrect attributes.

Regions must enable support for direct read by implementing the .read()
callback function. If a region does not support such direct reads, a
suitable extended error message is reported.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30 20:54:30 -08:00
Michal Wilczynski
f2fc15e271 devlink: Allow to set up parent in devl_rate_leaf_create()
Currently the driver is able to create leaf nodes for the devlink-rate,
but is unable to set parent for them. This wasn't as issue before the
possibility to export hierarchy from the driver. After adding the export
feature, in order for the driver to supply correct hierarchy, it's
necessary for it to be able to supply a parent name to
devl_rate_leaf_create().

Introduce a new parameter 'parent_name' in devl_rate_leaf_create().

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17 21:41:27 -08:00
Michal Wilczynski
caba177d7f devlink: Enable creation of the devlink-rate nodes from the driver
Intel 100G card internal firmware hierarchy for Hierarchicial QoS is very
rigid and can't be easily removed. This requires an ability to export
default hierarchy to allow user to modify it. Currently the driver is
only able to create the 'leaf' nodes, which usually represent the vport.
This is not enough for HQoS implemented in Intel hardware.

Introduce new function devl_rate_node_create() that allows for creation
of the devlink-rate nodes from the driver.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17 21:41:26 -08:00
Michal Wilczynski
6e2d7e84fc devlink: Introduce new attribute 'tx_weight' to devlink-rate
To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_weight' needs to be introduced. This attribute allows
for usage of Weighted Fair Queuing arbitration scheme among siblings.
This arbitration scheme can be used simultaneously with the strict
priority.

Introduce new attribute in devlink-rate that will allow for configuration
of Weighted Fair Queueing. New attribute is optional.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17 21:41:26 -08:00
Michal Wilczynski
cd50223683 devlink: Introduce new attribute 'tx_priority' to devlink-rate
To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_priority' needs to be introduced. This attribute allows
for usage of strict priority arbiter among siblings. This arbitration
scheme attempts to schedule nodes based on their priority as long as the
nodes remain within their bandwidth limit.

Introduce new attribute in devlink-rate that will allow for configuration
of strict priority. New attribute is optional.

Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17 21:41:25 -08:00
Ido Schimmel
2640a82bbc devlink: Add packet traps for 802.1X operation
Add packet traps for 802.1X operation. The "eapol" control trap is used
to trap EAPOL packets and is required for the correct operation of the
control plane. The "locked_port" drop trap can be enabled to gain
visibility into packets that were dropped by the device due to the
locked bridge port check.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09 19:06:14 -08:00
Jiri Pirko
dca56c3038 net: expose devlink port over rtnetlink
Expose devlink port handle related to netdev over rtnetlink. Introduce a
new nested IFLA attribute to carry the info. Call into devlink code to
fill-up the nest with existing devlink attributes that are used over
devlink netlink.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03 20:48:37 -07:00
Jiri Pirko
31265c1e29 net: devlink: store copy netdevice ifindex and ifname to allow port_fill() without RTNL held
To avoid a need to take RTNL mutex in port_fill() function, benefit from
the introduce infrastructure that tracks netdevice notifier events.
Store the ifindex and ifname upon register and change name events.
Remove the rtnl_held bool propagated down to port_fill() function as it
is no longer needed.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03 20:48:35 -07:00
Jiri Pirko
c80965784d net: devlink: remove netdev arg from devlink_port_type_eth_set()
Since devlink_port_type_eth_set() should no longer be called by any
driver with netdev pointer as it should rather use
SET_NETDEV_DEVLINK_PORT, remove the netdev arg. Add a warn to
type_clear()

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03 20:48:34 -07:00
Jiri Pirko
3830c5719a net: devlink: convert devlink port type-specific pointers to union
Instead of storing type_dev as a void pointer, convert it to union and
use it to store either struct net_device or struct ib_device pointer.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03 20:48:32 -07:00
Jiri Pirko
ae3bbc04d4 net: devlink: add port_init/fini() helpers to allow pre-register/post-unregister functions
Lifetime of some of the devlink objects, like regions, is currently
forced to be different for devlink instance and devlink port instance
(per-port regions). The reason is that for devlink ports, the internal
structures initialization happens only after devlink_port_register() is
called.

To resolve this inconsistency, introduce new set of helpers to allow
driver to initialize devlink pointer and region list before
devlink_register() is called. That allows port regions to be created
before devlink port registration and destroyed after devlink
port unregistration.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30 18:17:16 -07:00
Jiri Pirko
081adcfe93 net: devlink: introduce a flag to indicate devlink port being registered
Instead of relying on devlink pointer not being initialized, introduce
an extra flag to indicate if devlink port is registered. This is needed
as later on devlink pointer is going to be initialized even in case
devlink port is not registered yet.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30 18:17:16 -07:00
Jiri Pirko
146ecbac1d net: devlink: stub port params cmds for they are unused internally
Follow-up the removal of unused internal api of port params made by
commit 42ded61aa7 ("devlink: Delete not used port parameters APIs")
and stub the commands and add extack message to tell the user what is
going on.

If later on port params are needed, could be easily re-introduced,
but until then it is a dead code.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220826082730.1399735-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-30 13:19:47 +02:00
Jiri Pirko
f94b606325 net: devlink: limit flash component name to match version returned by info_get()
Limit the acceptance of component name passed to cmd_flash_update() to
match one of the versions returned by info_get(), marked by version type.
This makes things clearer and enforces 1:1 mapping between exposed
version and accepted flash component.

Check VERSION_TYPE_COMPONENT version type during cmd_flash_update()
execution by calling info_get() with different "req" context.
That causes info_get() to lookup the component name instead of
filling-up the netlink message.

Remove "UPDATE_COMPONENT" flag which becomes used.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25 13:22:53 -07:00
Jiri Pirko
bb67012331 net: devlink: extend info_get() version put to indicate a flash component
Whenever the driver is called by his info_get() op, it may put multiple
version names and values to the netlink message. Extend by additional
helper devlink_info_version_running/stored_put_ext() that allows to
specify a version type that indicates when particular version name
represents a flash component.

This is going to be used in follow-up patch calling info_get() during
flash update command checking if version with this the version type
exists.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25 13:22:52 -07:00
Vikas Gupta
08f588fa30 devlink: introduce framework for selftests
Add a framework for running selftests.
Framework exposes devlink commands and test suite(s) to the user
to execute and query the supported tests by the driver.

Below are new entries in devlink_nl_ops
devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported
selftests by the drivers.
devlink_nl_cmd_selftests_run: To execute selftests. Users can
provide a test mask for executing group tests or standalone tests.

Documentation/networking/devlink/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS

Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28 21:56:53 -07:00
Jiri Pirko
7b2d9a1a50 net: devlink: introduce nested devlink entity for line card
For the purpose of exposing device info and allow flash update which is
going to be implemented in follow-up patches, introduce a possibility
for a line card to expose relation to nested devlink entity. The nested
devlink entity represents the line card.

Example:

$ devlink lc show pci/0000:01:00.0 lc 1
pci/0000:01:00.0:
  lc 1 state active type 16x100G nested_devlink auxiliary/mlxsw_core.lc.0
    supported_types:
       16x100G
$ devlink dev show auxiliary/mlxsw_core.lc.0
auxiliary/mlxsw_core.lc.0

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 13:50:51 -07:00
Jiri Pirko
f655dacb59 net: devlink: remove unused locked functions
Remove locked versions of functions that are no longer used by anyone.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18 20:10:48 -07:00
Jiri Pirko
012ec02ae4 netdevsim: convert driver to use unlocked devlink API during init/fini
Prepare for devlink reload being called with devlink->lock held and
convert the netdevsim driver to use unlocked devlink API during init and
fini flows. Take devl_lock() in reload_down() and reload_up() ops in the
meantime before reload cmd is converted to take the lock itself.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18 20:10:48 -07:00
Jiri Pirko
eb0e9fa2c6 net: devlink: add unlocked variants of devlink_region_create/destroy() functions
Add unlocked variants of devlink_region_create/destroy() functions
to be used in drivers called-in with devlink->lock held.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18 20:10:48 -07:00
Jiri Pirko
70a2ff8936 net: devlink: add unlocked variants of devlink_dpipe*() functions
Add unlocked variants of devlink_dpipe*() functions to be used
in drivers called-in with devlink->lock held.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18 20:10:47 -07:00
Jiri Pirko
755cfa69c4 net: devlink: add unlocked variants of devlink_sb*() functions
Add unlocked variants of devlink_sb*() functions to be used
in drivers called-in with devlink->lock held.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18 20:10:47 -07:00
Jiri Pirko
c223d6a4bf net: devlink: add unlocked variants of devlink_resource*() functions
Add unlocked variants of devlink_resource*() functions to be used
in drivers called-in with devlink->lock held.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18 20:10:46 -07:00
Jiri Pirko
852e85a704 net: devlink: add unlocked variants of devling_trap*() functions
Add unlocked variants of devl_trap*() functions to be used in drivers
called-in with devlink->lock held.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18 20:10:46 -07:00
Jiri Pirko
9a7923668b net: devlink: make devlink_dpipe_headers_register() return void
The return value is not used, so change the return value type to void.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14 21:58:46 -07:00
Jiri Pirko
277cbb6bc4 net: devlink: move unlocked function prototypes alongside the locked ones
Maintain the same order as it is in devlink.c for function prototypes.
The most of the locked variants would very likely soon be removed
and the unlocked version would be the only one.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13 13:49:44 +01:00
Moshe Shemesh
df539fc62b devlink: Remove unused functions devlink_rate_leaf_create/destroy
The previous patch removed the last usage of the functions
devlink_rate_leaf_create() and devlink_rate_nodes_destroy(). Thus,
remove these function from devlink API.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-12 10:26:22 +02:00
Moshe Shemesh
868232f5cd devlink: Remove unused function devlink_rate_nodes_destroy
The previous patch removed the last usage of the function
devlink_rate_nodes_destroy(). Thus, remove this function from devlink
API.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-12 10:26:22 +02:00
Jakub Kicinski
c4a67a21a6 Revert "Merge branch 'mlxsw-line-card-model'"
This reverts commit 5e927a9f4b, reversing
changes made to cfc1d91a7d.

The discussion is still ongoing so let's remove the uAPI
until the discussion settles.

Link: https://lore.kernel.org/all/20220425090021.32e9a98f@kernel.org/
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220504154037.539442-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 15:47:23 -07:00
Jiri Pirko
28b2d1f1ac devlink: introduce line card device info infrastructure
Extend the line card info message with information (e.g., FW version)
about devices found on the line card.

Example:
$ devlink lc info pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
  lc 8
    versions:
        fixed:
          hw.revision 0
        running:
          ini.version 4
    devices:
      device 0
        versions:
            running:
              fw 19.2010.1310
      device 1
        versions:
            running:
              fw 19.2010.1310
      device 2
        versions:
            running:
              fw 19.2010.1310
      device 3
        versions:
            running:
              fw 19.2010.1310

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25 10:42:28 +01:00
Jiri Pirko
276910aecc devlink: introduce line card info get message
Allow the driver to provide per line card info get op to fill-up info,
similar to the "devlink dev info".

Example:

$ devlink lc info pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
  lc 8
    versions:
        fixed:
          hw.revision 0
        running:
          ini.version 4

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25 10:42:28 +01:00
Jiri Pirko
8d92e4fbcf devlink: introduce line card devices support
Line card can contain one or more devices that makes sense to make
visible to the user. For example, this can be a gearbox with
flash memory, which could be updated.

Provide the driver possibility to attach such devices to a line card
and expose those to user.

Example:
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
  lc 8 state active type 16x100G
    supported_types:
      16x100G
    devices:
      device 0
      device 1
      device 2
      device 3

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25 10:42:28 +01:00
Jiri Pirko
b837585985 devlink: add port to line card relationship set
In order to properly inform user about relationship between port and
line card, introduce a driver API to set line card for a port. Use this
information to extend port devlink netlink message by line card index
and also include the line card index into phys_port_name and by that
into a netdevice name.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18 11:00:18 +01:00
Jiri Pirko
fc9f50d5b3 devlink: implement line card active state
Allow driver to mark a line card as active. Expose this state to the
userspace over devlink netlink interface with proper notifications.
'active' state means that line card was plugged in after
being provisioned.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18 11:00:18 +01:00