Replace existing hw_ranndom/exynos-rng driver with a new, reworked one.
This is a driver for pseudo random number generator block which on
Exynos4 chipsets must be seeded with some value. On newer Exynos5420
chipsets it might seed itself from true random number generator block
but this is not implemented yet.
New driver is a complete rework to use the crypto ALGAPI instead of
hw_random API. Rationale for the change:
1. hw_random interface is for true RNG devices.
2. The old driver was seeding itself with jiffies which is not a
reliable source for randomness.
3. Device generates five random 32-bit numbers in each pass but old
driver was returning only one 32-bit number thus its performance was
reduced.
Compatibility with DeviceTree bindings is preserved.
New driver does not use runtime power management but manually enables
and disables the clock when needed. This is preferred approach because
using runtime PM just to toggle clock is huge overhead.
Another difference is reseeding itself with generated random data
periodically and during resuming from system suspend (previously driver
was re-seeding itself again with jiffies).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This module registers a CRC32 ("Ethernet") and a CRC32C (Castagnoli)
algorithm that make use of the STMicroelectronics STM32 crypto hardware.
Theses algorithms are compatible with the little-endian generic ones.
Both algorithms use ~0 as default seed (key).
With CRC32C the output is xored with ~0.
Using TCRYPT CRC32C speed test, this shows up to 900% speedup compared
to the crc32c-generic algorithm.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a driver for the ZIP engine found on Cavium ThunderX SOCs.
The ZIP engine supports hardware accelerated compression and
decompression. It includes 2 independent ZIP cores and supports:
- DEFLATE compression and decompression (RFC 1951)
- LZS compression and decompression (RFC 2395 and ANSI X3.241-1994)
- ADLER32 and CRC32 checksums for ZLIB (RFC 1950) and GZIP (RFC 1952)
The ZIP engine is presented as a PCI device. It supports DMA and
scatter-gather.
Signed-off-by: Mahipal Challa <Mahipal.Challa@cavium.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
- vmalloc stack regression in CCM
- Build problem in CRC32 on ARM
- Memory leak in cavium
- Missing Kconfig dependencies in atmel and mediatek
- XTS Regression on some platforms (s390 and ppc)
- Memory overrun in CCM test vector
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: vmx - Use skcipher for xts fallback
crypto: vmx - Use skcipher for cbc fallback
crypto: testmgr - Pad aes_ccm_enc_tv_template vector
crypto: arm/crc32 - add build time test for CRC instruction support
crypto: arm/crc32 - fix build error with outdated binutils
crypto: ccm - move cbcmac input off the stack
crypto: xts - Propagate NEED_FALLBACK bit
crypto: api - Add crypto_requires_off helper
crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA
crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA
crypto: cavium - fix leak on curr if curr->head fails to be allocated
crypto: cavium - Fix couple of static checker errors
Pull more s390 updates from Martin Schwidefsky:
"Next to the usual bug fixes (including the TASK_SIZE fix), there is
one larger crypto item. It allows to use protected keys with the
in-kernel crypto API
The protected key support has two parts, the pkey user space API to
convert key formats and the paes crypto module that uses a protected
key instead of a standard AES key"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: TASK_SIZE for kernel threads
s390/crypt: Add protected key AES module
s390/dasd: fix spelling mistake: "supportet" -> "supported"
s390/pkey: Introduce pkey kernel module
s390/zcrypt: export additional symbols
s390/zcrypt: Rework CONFIG_ZCRYPT Kconfig text.
s390/zcrypt: Cleanup leftover module code.
s390/nmi: purge tlbs after control register validation
s390/nmi: fix order of register validation
s390/crypto: Add PCKMO inline function
s390/zcrypt: Enable request count reset for cards and queues.
s390/mm: use _SEGMENT_ENTRY_EMPTY in the code
s390/chsc: Add exception handler for CHSC instruction
s390: opt into HAVE_COPY_THREAD_TLS
s390: restore address space when returning to user space
s390: rename CIF_ASCE to CIF_ASCE_PRIMARY
If NO_DMA=y:
ERROR: "bad_dma_ops" [drivers/crypto/mediatek/mtk-crypto.ko] undefined!
Add a dependency on HAS_DMA to fix this.
Fixes: 7dee9f6187 ("crypto: mediatek - remove ARM dependencies")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces a new in-kernel-crypto blockcipher
called 'paes' which implements AES with protected keys.
The paes blockcipher can be used similar to the aes
blockcipher but uses secure key material to derive the
working protected key and so offers an encryption
implementation where never a clear key value is exposed
in memory.
The paes module is only available for the s390 platform
providing a minimal hardware support of CPACF enabled
with at least MSA level 3. Upon module initialization
these requirements are checked.
Includes additional contribution from Harald Freudenberger.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch introcudes a new kernel module pkey which is providing
protected key handling and management functions. The pkey API is
available within the kernel for other s390 specific code to create
and manage protected keys. Additionally the functions are exported
to user space via IOCTL calls. The implementation makes extensive
use of functions provided by the zcrypt device driver. For
generating protected keys from secure keys there is also a CEX
coprocessor card needed.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The CONFIG_ZCRYPT Kconfig entry in drivers/crypto showed
outdated hardware whereas the latest cards where missing.
Reworked the text to reflect the current abilities of the
zcrypt device driver.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add Broadcom Secure Processing Unit (SPU) crypto driver for SPU
hardware crypto offload. The driver supports ablkcipher, ahash,
and aead symmetric crypto operations.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the CPT options in crypto Kconfig and update the
crypto Makefile
Update the MAINTAINERS file too.
Signed-off-by: George Cherian <george.cherian@cavium.com>
Reviewed-by: David Daney <david.daney@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the new authenc support, we get a harmless Kconfig warning:
warning: (CRYPTO_DEV_ATMEL_AUTHENC) selects CRYPTO_DEV_ATMEL_SHA which has unmet direct dependencies (CRYPTO && CRYPTO_HW && ARCH_AT91)
The problem is that each of the options has slightly different dependencies,
although they all seem to want the same thing: allow building for real AT91
targets that actually have the hardware, and possibly for compile testing.
This makes all four options consistent: instead of depending on a particular
dmaengine implementation, we depend on the ARM platform, CONFIG_COMPILE_TEST
as an alternative when that is turned off. This makes the 'select' statements
work correctly.
Fixes: 89a82ef87e ("crypto: atmel-authenc - add support to authenc(hmac(shaX), Y(aes)) modes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patchs allows to combine the AES and SHA hardware accelerators on
some Atmel SoCs. Doing so, AES blocks are only written to/read from the
AES hardware. Those blocks are also transferred from the AES to the SHA
accelerator internally, without additionnal accesses to the system busses.
Hence, the AES and SHA accelerators work in parallel to process all the
data blocks, instead of serializing the process by (de)crypting those
blocks first then authenticating them after like the generic
crypto/authenc.c driver does.
Of course, both the AES and SHA hardware accelerators need to be available
before we can start to process the data blocks. Hence we use their crypto
request queue to synchronize both drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Building the mediatek driver on an older ARM architecture results in a
harmless warning:
warning: (ARCH_OMAP2PLUS_TYPICAL && CRYPTO_DEV_MEDIATEK) selects NEON which has unmet direct dependencies (VFPv3 && CPU_V7)
We could add an explicit dependency on CPU_V7, but it seems nicer to
open up the build to additional configurations. This replaces the ARM
optimized algorithm selection with the normal one that all other drivers
use, and that in turn lets us relax the dependency on ARM and drop
a number of the unrelated 'select' statements.
Obviously a real user would still select those other optimized drivers
as a fallback, but as there is no strict dependency, we can leave that
up to the user.
Fixes: 785e5c616c ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Driver only has runtime but no build time dependency with ARCH_PICOXCELL.
So it can be built for testing purposes if COMPILE_TEST option is enabled.
This is useful to have more build coverage and make sure that the driver
is not affected by changes that could cause build regressions.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds support for the MediaTek hardware accelerator on
mt7623/mt2701/mt8521p SoC.
This driver currently implement:
- SHA1 and SHA2 family(HMAC) hash algorithms.
- AES block cipher in CBC/ECB mode with 128/196/256 bits keys.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces virtio-crypto driver for Linux Kernel.
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The encryption anddecryption requests
are placed in the data queue and are ultimately handled by
thebackend crypto accelerators. The second queue is the
control queue used to create or destroy sessions for
symmetric algorithms and will control some advanced features
in the future. The virtio crypto device provides the following
cryptoservices: CIPHER, MAC, HASH, and AEAD.
For more information about virtio-crypto device, please see:
http://qemu-project.org/Features/VirtioCrypto
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Halil Pasic <pasic@linux.vnet.ibm.com>
CC: David S. Miller <davem@davemloft.net>
CC: Zeng Xin <xin.zeng@intel.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.9:
API:
- The crypto engine code now supports hashes.
Algorithms:
- Allow keys >= 2048 bits in FIPS mode for RSA.
Drivers:
- Memory overwrite fix for vmx ghash.
- Add support for building ARM sha1-neon in Thumb2 mode.
- Reenable ARM ghash-ce code by adding import/export.
- Reenable img-hash by adding import/export.
- Add support for multiple cores in omap-aes.
- Add little-endian support for sha1-powerpc.
- Add Cavium HWRNG driver for ThunderX SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits)
crypto: caam - treat SGT address pointer as u64
crypto: ccp - Make syslog errors human-readable
crypto: ccp - clean up data structure
crypto: vmx - Ensure ghash-generic is enabled
crypto: testmgr - add guard to dst buffer for ahash_export
crypto: caam - Unmap region obtained by of_iomap
crypto: sha1-powerpc - little-endian support
crypto: gcm - Fix IV buffer size in crypto_gcm_setkey
crypto: vmx - Fix memory corruption caused by p8_ghash
crypto: ghash-generic - move common definitions to a new header file
crypto: caam - fix sg dump
hwrng: omap - Only fail if pm_runtime_get_sync returns < 0
crypto: omap-sham - shrink the internal buffer size
crypto: omap-sham - add support for export/import
crypto: omap-sham - convert driver logic to use sgs for data xmit
crypto: omap-sham - change the DMA threshold value to a define
crypto: omap-sham - add support functions for sg based data handling
crypto: omap-sham - rename sgl to sgl_tmp for deprecation
crypto: omap-sham - align algorithms on word offset
crypto: omap-sham - add context export/import stubs
...
As setting up the DMA operations is quite costly, add software fallback
support for requests smaller than 200 bytes. This change gives some 10%
extra performance in ipsec use case.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: udpated against latest upstream, to use skcipher mainly]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds the config entry for the Chelsio Crypto Driver, Makefile changes
for the same.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a crypto API module to access the vector extension based CRC-32
implementations. Users can request the optimized implementation through
the shash crypto API interface.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since the crypto engine framework had been merged, thus this patch integrates
with the newly added crypto engine framework to make the crypto hardware
engine under utilized as each block needs to be processed before the crypto
hardware can start working on the next block.
The crypto engine framework can manage and process the requests automatically,
so remove the 'queue' and 'queue_task' things in omap des driver.
Signed-off-by: Baolin <baolin.wang@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch integrates the ppc4xx-rng driver into the existing
crypto4xx. This is because the true random number generator
is controlled and part of the security core.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to the Freescale GPL driver code, there are two different
Security Controller (SCC) versions: SCC and SCC2.
The SCC is found on older i.MX SoCs, e.g. the i.MX25. This is the
version implemented and tested here.
As there is no publicly available documentation for this IP core,
all information about this unit is gathered from the GPL'ed driver
from Freescale.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Get some build coverage of S5P/Exynos AES H/W acceleration driver.
Driver uses DMA and devm_ioremap_resource() so add DMA and IOMEM
dependencies for the compile testing.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add md5 sha1 sha256 support for crypto engine in rk3288.
Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver for the sunxi-ss crypto engine is not entirely 64-bit safe,
compilation on arm64 spits some warnings.
The proper fix was deemed to involved [1], so since 64-bit SoCs won't
have this IP block we just disable this driver for 64-bit.
[1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-January/399988.html
(and the reply)
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Integrate with the newly added crypto engine to make the crypto hardware
engine underutilized as each block needs to be processed before the crypto
hardware can start working on the next block.
The requests from dm-crypt will be listed into engine queue and processed
by engine automatically, so remove the 'queue' and 'queue_task' things in
omap aes driver.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support to the GCM mode.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Precalculated hash for empty message are now present in hash headers.
This patch just use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto driver support:
ecb(aes) cbc(aes) ecb(des) cbc(des) ecb(des3_ede) cbc(des3_ede)
You can alloc tags above in your case.
And other algorithms and platforms will be added later on.
Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Atmel at91 crypto driver unconditionally selects AT_HDMAC,
which results in a Kconfig warning if that driver is not enabled:
warning: (CRYPTO_DEV_ATMEL_AES) selects AT_HDMAC which has unmet direct dependencies (DMADEVICES && ARCH_AT91)
The crypto driver itself does not actually have a dependency
on a particular dma engine, other than this being the one that
is used in at91.
Removing the 'select' gets rid of the warning, but can cause
the driver to be unusable if the HDMAC is not enabled at the
same time. To work around that, this patch clarifies the runtime
dependency to be 'AT_HDMAC || AT_XDMAC', but adds an alternative
for COMPILE_TEST, which lets the driver get build on all systems.
The ARCH_AT91 dependency is implied by AT_XDMAC || AT_HDMAC now
and no longer needs to be listed separately.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mxs-dcp driver relies on the stmp_reset_block() helper function, which
is provided by CONFIG_STMP_DEVICE. This symbol is always set on MXS,
but the driver can now also be built for MXC (i.MX6), which results
in a built error if no other driver selects STMP_DEVICE:
drivers/built-in.o: In function `mxs_dcp_probe':
vf610-ocotp.c:(.text+0x3df302): undefined reference to `stmp_reset_block'
This adds the 'select', like all other stmp drivers have it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a2712e6c75 ("crypto: mxs-dcp - Allow MXS_DCP to be used on MX6SL")
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CCP is meant to be more of an offload engine than an accelerator
engine. To avoid any confusion, change references to accelerator to
offload.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MX6SL has the same DCP crypto block as in MX23/MX28, so allow it to be
built for ARCH_MXC.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This code uses FP (floating point), Altivec and VSX (Vector-Scalar
Extension). It can just depend on CONFIG_VSX though, because that
already depends on FP and Altivec.
Otherwise we get lots of link errors such as:
drivers/built-in.o: In function `.p8_aes_setkey':
aes.c:(.text+0x2d325c): undefined reference to `.enable_kernel_altivec'
aes.c:(.text+0x2d326c): undefined reference to `.enable_kernel_vsx'
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Security System included in Allwinner SoC A20.
The Security System is a hardware cryptographic accelerator that support:
- MD5 and SHA1 hash algorithms
- AES block cipher in CBC/ECB mode with 128/196/256bits keys.
- DES and 3DES block cipher in CBC/ECB mode
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CESA driver calls phys_to_virt() which is not available on all
architectures.
Remove the depency on COMPILE_TEST to prevent building this driver on
non ARM architectures.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CESA IP supports CPU offload through a dedicated DMA engine (TDMA)
which can control the crypto block.
When you use this mode, all the required data (operation metadata and
payload data) are transferred using DMA, and the results are retrieved
through DMA when possible (hash results are not retrieved through DMA yet),
thus reducing the involvement of the CPU and providing better performances
in most cases (for small requests, the cost of DMA preparation might
exceed the performance gain).
Note that some CESA IPs do not embed this dedicated DMA, hence the
activation of this feature on a per platform basis.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The existing mv_cesa driver supports some features of the CESA IP but is
quite limited, and reworking it to support new features (like involving the
TDMA engine to offload the CPU) is almost impossible.
This driver has been rewritten from scratch to take those new features into
account.
This commit introduce the base infrastructure allowing us to add support
for DMA optimization.
It also includes support for one hash (SHA1) and one cipher (AES)
algorithm, and enable those features on the Armada 370 SoC.
Other algorithms and platforms will be added later on.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mv_cesa driver currently expects the SRAM memory region to be passed
as a platform device resource.
This approach implies two drawbacks:
- the DT representation is wrong
- the only one that can access the SRAM is the crypto engine
The last point is particularly annoying in some cases: for example on
armada 370, a small region of the crypto SRAM is used to implement the
cpuidle, which means you would not be able to enable both cpuidle and the
CESA driver.
To address that problem, we explicitly define the SRAM device in the DT
and then reference the sram node from the crypto engine node.
Also note that the old way of retrieving the SRAM memory region is still
supported, or in other words, backward compatibility is preserved.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a number of problems in crypto driver Kconfig
entries:
1. Select BLKCIPHER instead of BLKCIPHER2. The latter is internal
and should not be used outside of the crypto API itself.
2. Do not select ALGAPI unless you use a legacy type like
CRYPTO_ALG_TYPE_CIPHER.
3. Select the algorithm type that you are implementing, e.g., AEAD.
4. Do not select generic C code such as CBC/ECB unless you use them
as a fallback.
5. Remove default n since that is the default default.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The top-level CRYPTO_DEV_VMX option already depends on PPC64 so
there is no need to depend on it again at CRYPTO_DEV_VMX_ENCRYPT.
This patch also removes a redundant "default n".
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add NX-842 frontend that allows using either the pSeries platform or
PowerNV platform driver (to be added by later patch) for the NX-842
hardware. Update the MAINTAINERS file to include the new filenames.
Update Kconfig files to clarify titles and descriptions, and correct
dependencies.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If NO_DMA=y:
drivers/built-in.o: In function `img_hash_write_via_dma_stop':
img-hash.c:(.text+0xa2b822): undefined reference to `dma_unmap_sg'
drivers/built-in.o: In function `img_hash_xmit_dma':
img-hash.c:(.text+0xa2b8d8): undefined reference to `dma_map_sg'
img-hash.c:(.text+0xa2b948): undefined reference to `dma_unmap_sg'
Also move the "depends" section below the "tristate" line while we're at
it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
