Convert the last of the open coded corruption check and report idioms to
use the XFS_IS_CORRUPT macro.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_iomap_write_unwritten, we need to ensure that dquots are attached
to the inode and quota blocks reserved so that we capture in the quota
counters any blocks allocated to handle a bmbt split. This can happen
on the first unwritten extent conversion to a preallocated sparse file
on a fresh mount.
This was found by running generic/311 with quotas enabled. The bug
seems to have been introduced in "[XFS] rework iocore infrastructure,
remove some code and make it more" from ~2002?
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Replace the open-coded checks for whether or not an inode fork maps
blocks with a macro that will implant the code for us. This helps us
declutter the bmap code a bit.
Note that I had to use a macro instead of a static inline function
because of C header dependency problems between xfs_inode.h and
xfs_inode_fork.h.
Conversion was performed with the following Coccinelle script:
@@
expression ip, w;
@@
- XFS_IFORK_FORMAT(ip, w) == XFS_DINODE_FMT_EXTENTS || XFS_IFORK_FORMAT(ip, w) == XFS_DINODE_FMT_BTREE
+ xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- XFS_IFORK_FORMAT(ip, w) != XFS_DINODE_FMT_EXTENTS && XFS_IFORK_FORMAT(ip, w) != XFS_DINODE_FMT_BTREE
+ !xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- XFS_IFORK_FORMAT(ip, w) == XFS_DINODE_FMT_BTREE || XFS_IFORK_FORMAT(ip, w) == XFS_DINODE_FMT_EXTENTS
+ xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- XFS_IFORK_FORMAT(ip, w) != XFS_DINODE_FMT_BTREE && XFS_IFORK_FORMAT(ip, w) != XFS_DINODE_FMT_EXTENTS
+ !xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- (xfs_ifork_has_extents(ip, w))
+ xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- (!xfs_ifork_has_extents(ip, w))
+ !xfs_ifork_has_extents(ip, w)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the EOF alignment and checking for the next allocated extent into
the callers to avoid the need to pass the byte based offset and count
as well as looking at the incoming imap. The added benefit is that
the caller can unlock the incoming ilock and the function doesn't have
funny unbalanced locking contexts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
And move the code dependent on it to the one caller that cares
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
By open coding xfs_bmap_last_extent instead of calling it through a
double indirection we don't need to handle an error return that
can't happen given that we are guaranteed to have the extent list in
memory already. Also simplify the calling conventions a little and
move the extent list assert from the only caller into the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make the flag match the mount option and usage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the allocsize name to match the mount option and usage instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a new xfs_inode_buftarg helper that gets the data I/O buftarg for a
given inode. Replace the existing xfs_find_bdev_for_inode and
xfs_find_daxdev_for_inode helpers with this new general one and cleanup
some of the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_bmapi_write() takes a total block requirement parameter that is
passed down to the block allocation code and is used to specify the
total block requirement of the associated transaction. This is used
to try and select an AG that can not only satisfy the requested
extent allocation, but can also accommodate subsequent allocations
that might be required to complete the transaction. For example,
additional bmbt block allocations may be required on insertion of
the resulting extent to an inode data fork.
While it's important for callers to calculate and reserve such extra
blocks in the transaction, it is not necessary to pass the total
value to xfs_bmapi_write() in all cases. The latter automatically
sets minleft to ensure that sufficient free blocks remain after the
allocation attempt to expand the format of the associated inode
(i.e., such as extent to btree conversion, btree splits, etc).
Therefore, any callers that pass a total block requirement of the
bmap mapping length plus worst case bmbt expansion essentially
specify the additional reservation requirement twice. These callers
can pass a total of zero to rely on the bmapi minleft policy.
Beyond being superfluous, the primary motivation for this change is
that the total reservation logic in the bmbt code is dubious in
scenarios where minlen < maxlen and a maxlen extent cannot be
allocated (which is more common for data extent allocations where
contiguity is not required). The total value is based on maxlen in
the xfs_bmapi_write() caller. If the bmbt code falls back to an
allocation between minlen and maxlen, that allocation will not
succeed until total is reset to minlen, which essentially throws
away any additional reservation included in total by the caller. In
addition, the total value is not reset until after alignment is
dropped, which means that such callers drop alignment far too
aggressively than necessary.
Update all callers of xfs_bmapi_write() that pass a total block
value of the mapping length plus bmbt reservation to instead pass
zero and rely on xfs_bmapi_minleft() to enforce the bmbt reservation
requirement. This trades off slightly less conservative AG selection
for the ability to preserve alignment in more scenarios.
xfs_bmapi_write() callers that incorporate unrelated or additional
reservations in total beyond what is already included in minleft
must continue to use the former.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Only bail out once we know that a COW allocation is actually required,
similar to how we handle normal data fork allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move more checks into the helpers that determine if we need a COW
operation or allocation and split the return path for when an existing
data for allocation has been found versus a new allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Renaming whichfork to allocfork in xfs_buffered_write_iomap_begin makes
the usage of this variable a little more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of lots of magic conditionals in the main write_begin
handler this make the intent very clear. Thing will become even
better once we support delayed allocations for extent size hints
and realtime allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move xfs_file_iomap_begin_delay near the end of the file next to the
other iomap functions to prepare for additional refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Start untangling xfs_file_iomap_begin by splitting out the read-only
case into its own set of iomap_ops with a very simply iomap_begin
helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have lots of places that want to calculate the final fsb for
a offset + count in bytes and check that the result fits into
s_maxbytes. Factor out a helper for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace our local hacks to report the source block in the main iomap
with the proper scrmap reporting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rejuggle the return path to prepare for filling out a source iomap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_reflink_allocate_cow consumes the source data fork imap, and
potentially returns the COW fork imap. Split the arguments in two
to clear up the calling conventions and to prepare for returning
a source iomap from ->iomap_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no reason not to punch out stale delalloc blocks for zeroing
operations, as they otherwise behave exactly like normal writes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The srcmap is used to identify where the read is to be performed from.
It is passed to ->iomap_begin, which can fill it in if we need to read
data for partially written blocks from a different location than the
write target. The srcmap is only supported for buffered writes so far.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as
srcmap if not set, adjust length down to srcmap end as well]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Don't set IOMAP_F_NEW if we COW over an existing allocated range, as
these aren't strictly new allocations. This is required to be able to
use IOMAP_F_NEW to zero newly allocated blocks, which is required for
the iomap code to fully support file systems that don't do delayed
allocations or use unwritten extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently we don't overwrite the flags field in the iomap in
xfs_bmbt_to_iomap. This works fine with 0-initialized iomaps on stack,
but is harmful once we want to be able to reuse an iomap in the
writeback code. Replace the shared parameter with a set of initial
flags an thus ensures the flags field is always reinitialized.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When doing a direct IO that spans the current EOF, and there are
written blocks beyond EOF that extend beyond the current write, the
only metadata update that needs to be done is a file size extension.
However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that
there is IO completion metadata updates required, and hence we may
fail to correctly sync file size extensions made in IO completion
when O_DSYNC writes are being used and the hardware supports FUA.
Hence when setting IOMAP_F_DIRTY, we need to also take into account
whether the iomap spans the current EOF. If it does, then we need to
mark it dirty so that IO completion will call generic_write_sync()
to flush the inode size update to stable storage correctly.
Fixes: 3460cac1ca ("iomap: Use FUA for pure data O_DSYNC DIO writes")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: removed the ext4 part; they'll handle it separately]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a helper that validates the startblock is valid. This checks for a
non-zero block on the main device, but skips that check for blocks on
the realtime device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of a magic flag for xfs_trans_alloc, just ensure all callers
that can't relclaim through the file system use memalloc_nofs_save to
set the per-task nofs flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rework the data flow in xfs_file_iomap_begin where we decide if we have
to break shared extents.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Don't pass raw iomap flags to xfs_reflink_allocate_cow; signal our
intention with a boolean argument.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a mode where XFS never overwrites existing blocks in place. This
is to aid debugging our COW code, and also put infatructure in place
for things like possible future support for zoned block devices, which
can't support overwrites.
This mode is enabled globally by doing a:
echo 1 > /sys/fs/xfs/debug/always_cow
Note that the parameter is global to allow running all tests in xfstests
easily in this mode, which would not easily be possible with a per-fs
sysfs file.
In always_cow mode persistent preallocations are disabled, and fallocate
will fail when called with a 0 mode (with our without
FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space
when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE.
There are a few interesting xfstests failures when run in always_cow
mode:
- generic/392 fails because the bytes used in the file used to test
hole punch recovery are less after the log replay. This is
because the blocks written and then punched out are only freed
with a delay due to the logging mechanism.
- xfs/170 will fail as the already fragile file streams mechanism
doesn't seem to interact well with the COW allocator
- xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim
the file system is badly fragmented, but there is not much we
can do to avoid that when always writing out of place
- xfs/205 fails because overwriting a file in always_cow mode
will require new space allocation and the assumption in the
test thus don't work anymore.
- xfs/326 fails to modify the file at all in always_cow mode after
injecting the refcount error, leading to an unexpected md5sum
after the remount, but that again is expected
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No user of it in the iomap code at the moment, but we should not
actively report wrong information if we can trivially get it right.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Besides simplifying the code a bit this allows to actually implement
the behavior of using COW preallocation for non-COW data mentioned
in the current comments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While using delalloc for extsize hints is generally a good idea, the
current code that does so only for COW doesn't help us much and creates
a lot of special cases. Switch it to use real allocations like we
do for direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We speculatively allocate extents in the COW fork to reduce
fragmentation. But when we write data into such COW fork blocks that
do now shadow an allocation in the data fork SEEK_DATA will not
correctly report it, as it only looks at the data fork extents.
The only reason why that hasn't been an issue so far is because
we even use these speculative COW fork preallocations over holes in
the data fork at all for buffered writes, and blocks in the COW
fork that are written by direct writes are moved into the data
fork immediately at I/O completion time.
Add a new set of iomap_ops for SEEK_HOLE/SEEK_DATA which looks into
both the COW and data fork, and reports all COW extents as unwritten
to the iomap layer. While this isn't strictly true for COW fork
extents that were already converted to real extents, the practical
semantics that you can't read data from them until they are moved
into the data fork are very similar, and this will force the iomap
layer into probing the extents for actually present data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move checking for invalid zero blocks and setting of various iomap flags
into this helper. Also make it deal with "raw" delalloc extents to
avoid clutter in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This function is a small wrapper only used by the writeback code, so
move it together with the writeback code and simplify it down to the
glorified do { } while loop that is now is.
A few bits intentionally got lost here: no need to call xfs_qm_dqattach
because quotas are always attached when we create the delalloc
reservation, and no need for the imap->br_startblock == 0 check given
that xfs_bmapi_convert_delalloc already has a WARN_ON_ONCE for exactly
that condition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This way we can actually count how many bytes got converted and how many
calls we need, unlike in the caller which doesn't have the detailed
view.
Note that this includes a slight change in behavior as the
xs_xstrat_quick is now bumped for every allocation instead of just the
one covering the requested writeback offset, which makes a lot more
sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No need to deal with the transaction and the inode locking in the
caller. Note that we also switch to passing whichfork as the second
paramter, matching what most related functions do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The io_type field contains what is basically a summary of information
from the inode fork and the imap. But we can just as easily use that
information directly, simplifying a few bits here and there and
improving the trace points.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback delalloc conversion code is racy with respect to
changes in the currently cached file mapping outside of the current
page. This is because the ilock is cycled between the time the
caller originally looked up the mapping and across each real
allocation of the provided file range. This code has collected
various hacks over the years to help combat the symptoms of these
races (i.e., truncate race detection, allocation into hole
detection, etc.), but none address the fundamental problem that the
imap may not be valid at allocation time.
Rather than continue to use race detection hacks, update writeback
delalloc conversion to a model that explicitly converts the delalloc
extent backing the current file offset being processed. The current
file offset is the only block we can trust to remain once the ilock
is dropped because any operation that can remove the block
(truncate, hole punch, etc.) must flush and discard pagecache pages
first.
Modify xfs_iomap_write_allocate() to use the xfs_bmapi_delalloc()
mechanism to request allocation of the entire delalloc extent
backing the current offset instead of assuming the extent passed by
the caller is unchanged. Record the range specified by the caller
and apply it to the resulting allocated extent so previous checks by
the caller for COW fork overlap are not lost. Finally, overload the
bmapi delalloc flag with the range reval flag behavior since this is
the only use case for both.
This ensures that writeback always picks up the correct
and current extent associated with the page, regardless of races
with other extent modifying operations. If operating on a data fork
and the COW overlap state has changed since the ilock was cycled,
the caller revalidates against the COW fork sequence number before
using the imap for the next block.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback code caches the current extent mapping across multiple
xfs_do_writepage() calls to avoid repeated lookups for sequential
pages backed by the same extent. This is known to be slightly racy
with extent fork changes in certain difficult to reproduce
scenarios. The cached extent is trimmed to within EOF to help avoid
the most common vector for this problem via speculative
preallocation management, but this is a band-aid that does not
address the fundamental problem.
Now that we have an xfs_ifork sequence counter mechanism used to
facilitate COW writeback, we can use the same mechanism to validate
consistency between the data fork and cached writeback mappings. On
its face, this is somewhat of a big hammer approach because any
change to the data fork invalidates any mapping currently cached by
a writeback in progress regardless of whether the data fork change
overlaps with the range under writeback. In practice, however, the
impact of this approach is minimal in most cases.
First, data fork changes (delayed allocations) caused by sustained
sequential buffered writes are amortized across speculative
preallocations. This means that a cached mapping won't be
invalidated by each buffered write of a common file copy workload,
but rather only on less frequent allocation events. Second, the
extent tree is always entirely in-core so an additional lookup of a
usable extent mostly costs a shared ilock cycle and in-memory tree
lookup. This means that a cached mapping reval is relatively cheap
compared to the I/O itself. Third, spurious invalidations don't
impact ioend construction. This means that even if the same extent
is revalidated multiple times across multiple writepage instances,
we still construct and submit the same size ioend (and bio) if the
blocks are physically contiguous.
Update struct xfs_writepage_ctx with a new field to hold the
sequence number of the data fork associated with the currently
cached mapping. Check the wpc seqno against the data fork when the
mapping is validated and reestablish the mapping whenever the fork
has changed since the mapping was cached. This ensures that
writeback always uses a valid extent mapping and thus prevents lost
writebacks and stale delalloc block problems.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We only need to allocate blocks for zeroing for reflink inodes,
and for we currently have a special case for reflink files in
the otherwise direct I/O path that I'd like to get rid of.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This adds ordering of the updates and makes sure we always see the if_seq
update before the extent tree is modified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inodes that are held across deferred operations are explicitly
joined to the dfops structure to ensure appropriate relogging.
While inodes are currently joined explicitly, we can detect the
conditions that require relogging at dfops finish time by inspecting
the transaction item list for inodes with ili_lock_flags == 0.
Replace the xfs_defer_ijoin() infrastructure with such detection and
automatic relogging of held inodes. This eliminates the need for the
per-dfops inode list, replaced by an on-stack variant in
xfs_defer_trans_roll().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log items that require relogging during deferred operations
processing are explicitly joined to the associated dfops via the
xfs_defer_*join() helpers. These calls imply that the associated
object is "held" by the transaction such that when rolled, the item
can be immediately joined to a follow up transaction. For buffers,
this means the buffer remains locked and held after each roll. For
inodes, this means that the inode remains locked.
Failure to join a held item to the dfops structure means the
associated object pins the tail of the log while dfops processing
completes, because the item never relogs and is not unlocked or
released until deferred processing completes.
Currently, all buffers that are held in transactions (XFS_BLI_HOLD)
with deferred operations are explicitly joined to the dfops. This is
not the case for inodes, however, as various contexts defer
operations to transactions with held inodes without explicit joins
to the associated dfops (and thus not relogging).
While this is not a catastrophic problem, it is not ideal. Given
that we want to eventually relog such items automatically during
dfops processing, start by explicitly adding these missing
xfs_defer_ijoin() calls. A call is added everywhere an inode is
joined to a transaction without transferring lock ownership and
said transaction runs deferred operations.
All xfs_defer_ijoin() calls will eventually be replaced by automatic
dfops inode relogging. This patch essentially implements the
behavior change that would otherwise occur due to automatic inode
dfops relogging.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Used the per-fork sequence counter to avoid lookups in the writeback code
unless the COW fork actually changed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
