The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code does not return after successfully preparing the VLAN
addition on every ports member of a it. Fix this.
Fixes: 1ca4aa9cd4 ("net: dsa: check VLAN capability of every switch")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code does not return after successfully preparing the MDB
addition on every ports member of a multicast group. Fix this.
Fixes: a1a6b7ea7f ("net: dsa: add cross-chip multicast support")
Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the TIPC RPS dissector is based only on the incoming packets'
source node address, hence steering all traffic from a node to the same
core. We have seen that this makes the links vulnerable to starvation
and unnecessary resets when we turn down the link tolerance to very low
values.
To reduce the risk of this happening, we exempt probe and probe replies
packets from the convergence to one core per source node. Instead, we do
the opposite, - we try to diverge those packets across as many cores as
possible, by randomizing the flow selector key.
To make such packets identifiable to the dissector, we add a new
'is_keepalive' bit to word 0 of the LINK_PROTOCOL header. This bit is
set both for PROBE and PROBE_REPLY messages, and only for those.
It should be noted that these packets are not part of any flow anyway,
and only constitute a minuscule fraction of all packets sent across a
link. Hence, there is no risk that this will affect overall performance.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik says:
====================
net: macb: add error handling on probe and
This series adds more error handling to the macb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We add the call of_node_put(bp->phy_node) to all associated error
paths for memory clean up.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add the call of_phy_deregister_fixed_link to all associated
error paths for memory clean up.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GOP statistics from all ports of one instance of the driver are gathered
with one work recalled in loop in a workqueue. The loop is started when
a port is up, and stopped when a port is down. This last condition is
obviously wrong.
Fix this by having a work per port. This way, starting and stoping it
when the port is up or down will be fine, while minimizing unnecessary
CPU usage.
Fixes: 118d6298f6 ("net: mvpp2: add ethtool GOP statistics")
Reported-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lipeng says:
====================
net: hns3: Bug fixes & Code improvements in HNS3 driver
This patch-set introduces some bug fixes and code improvements.
As [patch 1/2] depends on the patch {5392902 net: hns3: Consistently using
GENMASK in hns3 driver}, which exists in net-next, not exists in net, so
push this serise to nex-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When checking whether auto-negotiation is on, driver only needs to
check the value of mac.autoneg(SW) directly, and does not need to
query it from hardware. Because this value is always synchronized
with the auto-negotiation state of hardware.
This patch removes mac auto-negotiation state query in
hclge_update_speed_duplex().
Fixes: 46a3df9f97 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver gets phy address from NCL_config file and uses the phy address
to initialize phydev. There are 5 bits for phy address. And C22 phy
address has 5 bits. So 0-31 are all valid address for phy. If there
is no phy, it will crash. Because driver always get a valid phy address.
This patch fixes the phy address to 8 bits, and use 0xff to indicate
invalid phy address.
Fixes: 46a3df9f97 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Attributes using NLA_U* and NLA_S* (where * is 8, 16,32 and 64) are
expected to be an exact length. Split these data types from
nla_attr_minlen into nla_attr_len and update validate_nla to require
the attribute to have exact length for them.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a per-device sysctl to specify the default traffic class to use for
kernel originated IPv6 Neighbour Discovery packets.
Currently this includes:
- Router Solicitation (ICMPv6 type 133)
ndisc_send_rs() -> ndisc_send_skb() -> ip6_nd_hdr()
- Neighbour Solicitation (ICMPv6 type 135)
ndisc_send_ns() -> ndisc_send_skb() -> ip6_nd_hdr()
- Neighbour Advertisement (ICMPv6 type 136)
ndisc_send_na() -> ndisc_send_skb() -> ip6_nd_hdr()
- Redirect (ICMPv6 type 137)
ndisc_send_redirect() -> ndisc_send_skb() -> ip6_nd_hdr()
and if the kernel ever gets around to generating RA's,
it would presumably also include:
- Router Advertisement (ICMPv6 type 134)
(radvd daemon could pick up on the kernel setting and use it)
Interface drivers may examine the Traffic Class value and translate
the DiffServ Code Point into a link-layer appropriate traffic
prioritization scheme. An example of mapping IETF DSCP values to
IEEE 802.11 User Priority values can be found here:
https://tools.ietf.org/html/draft-ietf-tsvwg-ieee-802-11
The expected primary use case is to properly prioritize ND over wifi.
Testing:
jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
0
jzem22:~# echo -1 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
-bash: echo: write error: Invalid argument
jzem22:~# echo 256 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
-bash: echo: write error: Invalid argument
jzem22:~# echo 0 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
jzem22:~# echo 255 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
255
jzem22:~# echo 34 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
34
jzem22:~# echo $[0xDC] > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
jzem22:~# tcpdump -v -i eth0 icmp6 and src host jzem22.pgc and dst host fe80::1
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
IP6 (class 0xdc, hlim 255, next-header ICMPv6 (58) payload length: 24)
jzem22.pgc > fe80::1: [icmp6 sum ok] ICMP6, neighbor advertisement,
length 24, tgt is jzem22.pgc, Flags [solicited]
(based on original change written by Erik Kline, with minor changes)
v2: fix 'suspicious rcu_dereference_check() usage'
by explicitly grabbing the rcu_read_lock.
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Erik Kline <ek@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several response handlers return EBUSY if the data corresponding to the
command/response pair is already set. There is no reason to return an
error here; the channel is advertising something as enabled because we
told it to enable it, and it's possible that the feature has been
enabled previously.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NCSI driver is mostly silent which becomes a headache when trying to
determine what has occurred on the NCSI connection. This adds additional
logging in a few key areas such as state transitions and calling out
certain errors more visibly.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prashant Bhole says:
====================
tools: bpftool: show filenames of pinned objects
This patchset adds support to show pinned objects in object details.
Patch1 adds a funtionality to open a path in bpf-fs regardless of its object
type.
Patch2 adds actual functionality by scanning the bpf-fs once and adding
object information in hash table, with object id as a key. One object may be
associated with multiple paths because an object can be pinned multiple times
Patch3 adds command line option to enable this functionality. Making it optional
because scanning bpf-fs can be costly.
====================
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Making it optional to show file names of pinned objects because
it scans complete bpf-fs filesystem which is costly.
Added option -f|--bpffs. Documentation updated.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was needed for opening any file in bpf-fs without knowing
its object type
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik says:
====================
Add the ability to do BPF directed error injection
I'm sending this through Dave since it'll conflict with other BPF changes in his
tree, but since it touches tracing as well Dave would like a review from
somebody on the tracing side.
v4->v5:
- disallow kprobe_override programs from being put in the prog map array so we
don't tail call into something we didn't check. This allows us to make the
normal path still fast without a bunch of percpu operations.
v3->v4:
- fix a build error found by kbuild test bot (I didn't wait long enough
apparently.)
- Added a warning message as per Daniels suggestion.
v2->v3:
- added a ->kprobe_override flag to bpf_prog.
- added some sanity checks to disallow attaching bpf progs that have
->kprobe_override set that aren't for ftrace kprobes.
- added the trace_kprobe_ftrace helper to check if the trace_event_call is a
ftrace kprobe.
- renamed bpf_kprobe_state to bpf_kprobe_override, fixed it so we only read this
value in the kprobe path, and thus only write to it if we're overriding or
clearing the override.
v1->v2:
- moved things around to make sure that bpf_override_return could really only be
used for an ftrace kprobe.
- killed the special return values from trace_call_bpf.
- renamed pc_modified to bpf_kprobe_state so bpf_override_return could tell if
it was being called from an ftrace kprobe context.
- reworked the logic in kprobe_perf_func to take advantage of bpf_kprobe_state.
- updated the test as per Alexei's review.
- Original message -
A lot of our error paths are not well tested because we have no good way of
injecting errors generically. Some subystems (block, memory) have ways to
inject errors, but they are random so it's hard to get reproduceable results.
With BPF we can add determinism to our error injection. We can use kprobes and
other things to verify we are injecting errors at the exact case we are trying
to test. This patch gives us the tool to actual do the error injection part.
It is very simple, we just set the return value of the pt_regs we're given to
whatever we provide, and then override the PC with a dummy function that simply
returns.
Right now this only works on x86, but it would be simple enough to expand to
other architectures. Thanks,
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a basic test for bpf_override_return to verify it works. We
override the main function for mounting a btrfs fs so it'll return
-ENOMEM and then make sure that trying to mount a btrfs fs will fail.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Error injection is sloppy and very ad-hoc. BPF could fill this niche
perfectly with it's kprobe functionality. We could make sure errors are
only triggered in specific call chains that we care about with very
specific situations. Accomplish this with the bpf_override_funciton
helper. This will modify the probe'd callers return value to the
specified value and set the PC to an override function that simply
returns, bypassing the originally probed function. This gives us a nice
clean way to implement systematic error injection for all of our code
paths.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The firmware for brcmfmac devices includes information regarding
regulatory constraints. For certain devices this information is kept
separately in a binary form that needs to be downloaded to the device.
This patch adds support to download this so-called CLM blob file. It
uses the same naming scheme as the other firmware files with extension
of .clm_blob.
The CLM blob file is optional. If the file does not exist, the download
process will be bypassed. It will not affect the driver loading.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJaBbFwAAoJEEp/3jgCEfOLYKAH/iB9iIJigf/Khv4S/iKp8hw0
q8kXPfSis2LCYWQjXnPtz1/f9vidiRRb5tw76sInn/hHgzbvGb4nWcGQV3zz0BqF
MOZmJxPzsDH3NUNZ5m5qHFAQpP+hm3I+6JeuQh1DshZOitI0BtGmQ5cnRW7pL+Ny
PZHCXonTtuUcURI6YTW43zh0XqlBdmZe9MUlSLQkKhsW+VRQXenz51a7KO64muoG
KxiVXewpgWHARQ27ck1xTBAQdTUZ14w0hjTH7FsqdMT5O7kCUzEgWl/zcQUs+Kxg
0j8fIsxrxYVT5Wya02y+1OkpoLfavR7resxnPwdZ1e9/QubfbK8OjtrSF87uwh0=
=wJA0
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-client
Pull ceph gix from Ilya Dryomov:
"Memory allocation flags fix, marked for stable"
* tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-client:
rbd: use GFP_NOIO for parent stat and data requests
Pull input layer updates from Dmitry Torokhov:
- a new ACPI ID for Elan touchpad found in yet another Ideapad model
- Synaptics RMI4 will allow binding to controllers reporting SMB
version 3 (note that we are not adding any new ACPI IDs to the
Synaptics PS/2 drover so unless user explicitly enables intertouch
support there is no user-visible change)
- a fixup to TSC 2004/5 touchscreen driver to mark input devices as
"direct" to help userspace identify the type of device they are
dealing with
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3
Input: tsc200x-core - set INPUT_PROP_DIRECT
Input: elan_i2c - add ELAN060C to the ACPI table
Fix PPC HV host crash that can occur as a result of resizing the guest
hashed page table.
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaBc/CAAoJEED/6hsPKofoI5QH/jxfWMsIcDy0iLPFPywKEV0K
bPt2e47qdWAYNByIgw2QSJBJtcay+LsXbheBlxSxsGO61ceK3HkUfr9CfXvRCpjQ
rdZwHArmpZSFTPYOcXfElF2BkJ+1kOZsDphfzrNVwUF3Q0Y+588IGQm1uv2bUKnA
QAzXFXDDzyKhLqknWoacUlM5UyYKmQwBVSfCFTsQBxhk34agIXH92ZYZLLGWJU6H
B+sjNu5plCoeorWK1NqMtOPAXHs7oV7gHxZLtDM6RL7jZVmYAbDA4zCqk/i2Vy4z
ZU1ihPD8QwvGMuJIsPwcC0ojUVwGP7ZMz/F3FhWSR/VzpRe6SU7T7LxMc1ZsGN0=
=8FAZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fix from Radim Krčmář:
"Fix PPC HV host crash that can occur as a result of resizing the guest
hashed page table"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates
A final few MIPS fixes for 4.14:
- Fix BMIPS NULL pointer dereference (4.7)
- Fix AR7 early GPIO init allocation failure (3.19)
- Fix dead serial output on certain AR7 platforms (2.6.35)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAloEwWQACgkQbAtpk944
dnrH0RAAlVxfUnX1NgHEoYlt6cvd9l1rb0n7zi0sy8sGfv4zaI/0QvsyQVnPx5yI
8Fmu4XWPsY8Evb3/sqVR5cIUiW/vC1gi5FRlPLoMzNnkoNpb8N/XSOiMlepAvayE
E3fSgcUNIK5n6ybltWcW2uLPDKganPTkDBcREAQOO+RukaVAMtI+E3O6ndESimfb
wiuaQZ/BSRl81tMaZkgOauHzWa626hzCnTBGHP2DiwAV+XA7Gyfc+WTeO5tnLoUK
yhMITk+umyhpemYfxbnW81d+lzM3LnY6+hsinpwOYBqpF+CmlIy5BlfggTe9C20T
LHxxshsyDusTm6QbMvu01AKLnx/mOthiq5jZIgQhjpjD7do3URnxcQe2bMDhAYZ6
h6rYNuYruE5AXdsjHAAFA6JNQUa3SMisopAjdkM3umhbSOmxfG4BU1ANhHj/HaYf
cj0XcCk4foFcl7/+P2pmlC8IDQoSaw5spxT+glXhhD/BpFwtvb0jx6ovxtKSGE0Z
6soe3fZQdEGvdChsTfNG+sehub1g3s+mkylFlNt5NA8quj/i1Z6XVHUGTK1cFUKS
6EOEdDB5pJfaZKjTpLiGahvV7eiG54pU+cDL0OIOUqo/Nqh6sFv6qzSBWYQtrMM0
i0pvIS2K8AJLl230hgiz5fsqUSslYVRTbygW4bSO8h1h3rnOElE=
=tNHp
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.14_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A final few MIPS fixes for 4.14:
- fix BMIPS NULL pointer dereference (4.7)
- fix AR7 early GPIO init allocation failure (3.19)
- fix dead serial output on certain AR7 platforms (2.6.35)"
* tag 'mips_fixes_4.14_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: AR7: Ensure that serial ports are properly set up
MIPS: AR7: Defer registration of GPIO
MIPS: BMIPS: Fix missing cbr address
Following my recent transition from Imagination Technologies to the=20
reincarnated MIPS company add a .mailmap mapping for my work address,
so that `scripts/get_maintainer.pl' gets it right for past commits.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 941f5f0f6e.
Sadly, it turns out that we really can't just do the cross-CPU IPI to
all CPU's to get their proper frequencies, because it's much too
expensive on systems with lots of cores.
So we'll have to revert this for now, and revisit it using a smarter
model (probably doing one system-wide IPI at open time, and doing all
the frequency calculations in parallel).
Reported-by: WANG Chao <chao.wang@ucloud.cn>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=MO5T
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.14-rc9' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Last few patches to wrap up.
Two i915 fixes that are on their way to stable, one vmware black
screen bug, and one const patch that I was going to drop, but it was
clearly a pretty safe one liner"
* tag 'drm-fixes-for-v4.14-rc9' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Deconstruct struct sgt_dma initialiser
drm/i915: Reject unknown syncobj flags
drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue
drm/vmwgfx: constify vmw_fence_ops
The CANFD transmitter delay calculation formula was updated in the
latest software drop from IFI and improves the behavior of the IFI
CANFD core during bitrate switching. Use the new formula to improve
stability of the CANFD operation.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Markus Marb <markus@marb.org>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes the cause of an WARNING indicatng TCP has pending
retransmission in Open state in tcp_fastretrans_alert().
The root cause is a bad interaction between path mtu probing,
if enabled, and the RACK loss detection. Upong receiving a SACK
above the sequence of the MTU probing packet, RACK could mark the
probe packet lost in tcp_fastretrans_alert(), prior to calling
tcp_simple_retransmit().
tcp_simple_retransmit() only enters Loss state if it newly marks
the probe packet lost. If the probe packet is already identified as
lost by RACK, the sender remains in Open state with some packets
marked lost and retransmitted. Then the next SACK would trigger
the warning. The likely scenario is that the probe packet was
lost due to its size or network congestion. The actual impact of
this warning is small by potentially entering fast recovery an
ACK later.
The simple fix is always entering recovery (Loss) state if some
packet is marked lost during path MTU probing.
Fixes: a0370b3f3f ("tcp: enable RACK loss detection to trigger recovery")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a GSO skb of truesize O is segmented into 2 new skbs of truesize N1
and N2, we want to transfer socket ownership to the new fresh skbs.
In order to avoid expensive atomic operations on a cache line subject to
cache bouncing, we replace the sequence :
refcount_add(N1, &sk->sk_wmem_alloc);
refcount_add(N2, &sk->sk_wmem_alloc); // repeated by number of segments
refcount_sub(O, &sk->sk_wmem_alloc);
by a single
refcount_add(sum_of(N) - O, &sk->sk_wmem_alloc);
Problem is :
In some pathological cases, sum(N) - O might be a negative number, and
syzkaller bot was apparently able to trigger this trace [1]
atomic_t was ok with this construct, but we need to take care of the
negative delta with refcount_t
[1]
refcount_t: saturated; leaking memory.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 8404 at lib/refcount.c:77 refcount_add_not_zero+0x198/0x200 lib/refcount.c:77
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 8404 Comm: syz-executor2 Not tainted 4.14.0-rc5-mm1+ #20
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1c4/0x1e0 kernel/panic.c:546
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177
do_trap_no_signal arch/x86/kernel/traps.c:211 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:260
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310
invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905
RIP: 0010:refcount_add_not_zero+0x198/0x200 lib/refcount.c:77
RSP: 0018:ffff8801c606e3a0 EFLAGS: 00010282
RAX: 0000000000000026 RBX: 0000000000001401 RCX: 0000000000000000
RDX: 0000000000000026 RSI: ffffc900036fc000 RDI: ffffed0038c0dc68
RBP: ffff8801c606e430 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8801d97f5eba R11: 0000000000000000 R12: ffff8801d5acf73c
R13: 1ffff10038c0dc75 R14: 00000000ffffffff R15: 00000000fffff72f
refcount_add+0x1b/0x60 lib/refcount.c:101
tcp_gso_segment+0x10d0/0x16b0 net/ipv4/tcp_offload.c:155
tcp4_gso_segment+0xd4/0x310 net/ipv4/tcp_offload.c:51
inet_gso_segment+0x60c/0x11c0 net/ipv4/af_inet.c:1271
skb_mac_gso_segment+0x33f/0x660 net/core/dev.c:2749
__skb_gso_segment+0x35f/0x7f0 net/core/dev.c:2821
skb_gso_segment include/linux/netdevice.h:3971 [inline]
validate_xmit_skb+0x4ba/0xb20 net/core/dev.c:3074
__dev_queue_xmit+0xe49/0x2070 net/core/dev.c:3497
dev_queue_xmit+0x17/0x20 net/core/dev.c:3538
neigh_hh_output include/net/neighbour.h:471 [inline]
neigh_output include/net/neighbour.h:479 [inline]
ip_finish_output2+0xece/0x1460 net/ipv4/ip_output.c:229
ip_finish_output+0x85e/0xd10 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:238 [inline]
ip_output+0x1cc/0x860 net/ipv4/ip_output.c:405
dst_output include/net/dst.h:459 [inline]
ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124
ip_queue_xmit+0x8c6/0x18e0 net/ipv4/ip_output.c:504
tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1137
tcp_write_xmit+0x663/0x4de0 net/ipv4/tcp_output.c:2341
__tcp_push_pending_frames+0xa0/0x250 net/ipv4/tcp_output.c:2513
tcp_push_pending_frames include/net/tcp.h:1722 [inline]
tcp_data_snd_check net/ipv4/tcp_input.c:5050 [inline]
tcp_rcv_established+0x8c7/0x18a0 net/ipv4/tcp_input.c:5497
tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1460
sk_backlog_rcv include/net/sock.h:909 [inline]
__release_sock+0x124/0x360 net/core/sock.c:2264
release_sock+0xa4/0x2a0 net/core/sock.c:2776
tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462
inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763
sock_sendmsg_nosec net/socket.c:632 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:642
___sys_sendmsg+0x31c/0x890 net/socket.c:2048
__sys_sendmmsg+0x1e6/0x5f0 net/socket.c:2138
Fixes: 14afee4b60 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit bcc6d47903 ("net: vlan: make non-hw-accel rx path similar
to hw-accel") unified accel and non-accel path for VLAN RX. With that
fix we do not register any packet_type handler for VLANs anymore, so fix
the incorrect comment.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the following PEAK-System CAN FD interfaces:
PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels)
PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.)
PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels)
PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.)
PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels)
Like the PCAN-PCIe FD interface, all of these boards run the same IP Core
that is able to handle CAN FD (see also http://www.peak-system.com).
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not
drained fast enough (overrun) it's getting mangled. Already received
frames are dropped - the data can't be restored.
Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The D_CAN controller doesn't provide a triple sampling mode, so don't set
the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling
triple sampling is a no-op.
Signed-off-by: Richard Schütz <rschuetz@uni-koblenz.de>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.6
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This is to prevent the case of working with a single MPWQE
(1 WQE is always reserved as RQ is linked-list).
When the WQE is fully consumed, HW should still have available buffer
in order not to drop packets.
Fixes: 461017cb00 ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently, when dma mapping fails, put_page is called,
but the page is not set to null. Later, in the page_reuse treatment in
mlx5e_free_rx_descs(), mlx5e_page_release() is called for the second time,
improperly doing dma_unmap (for a non-mapped address) and an extra put_page.
Prevent this by nullifying the page pointer when dma_map fails.
Fixes: accd588332 ("net/mlx5e: Introduce RX Page-Reuse")
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
napi->poll can be called with budget 0, e.g. in netpoll scenarios
where the caller only wants to poll TX rings
(poll_one_napi@net/core/netpoll.c).
The below commit changed RX polling from "while" loop to "do {} while",
which caused to ignore the initial budget and handle at least one RX
packet.
This fixes the following warning:
[ 2852.049194] mlx5e_napi_poll+0x0/0x260 [mlx5_core] exceeded budget in poll
[ 2852.049195] ------------[ cut here ]------------
[ 2852.049195] WARNING: CPU: 0 PID: 25691 at net/core/netpoll.c:171 netpoll_poll_dev+0x18a/0x1a0
Fixes: 4b7dfc9925 ("net/mlx5e: Early-return on empty completion queues")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Martin KaFai Lau <kafai@fb.com>
Tested-by: Martin KaFai Lau <kafai@fb.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
After the panic teardown firmware command, health_care detects the error
in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is
no longer needed because the panic teardown firmware command will bring
down the PCI bus communication with the HCA.
The solution is to cancel the health care timer and its pending
workqueue request before sending panic teardown firmware command.
Kernel trace:
mlx5_core 0033:01:00.0: Shutdown was called
mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here
mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1
mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called
mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start
mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0
mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end
Unable to handle kernel paging request for data at address 0x0000003f
Faulting instruction address: 0xc0080000434b8c80
Fixes: 8812c24d28 ('net/mlx5: Add fast unload support in shutdown flow')
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
list_splice_init initializing waiting_events_list after splicing it to
temp list, therefore we should loop over temp list to fire the events.
Fixes: 4ca637a20a ("net/mlx5: Delay events till mlx5 interface's add complete for pci resume")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Manish Kurup says:
====================
net_sched actions: act_vlan now uses RCU
This commit consists of 3 patches:
patch1 (1/3):
The VLAN action maintains one set of stats across all cores, and uses a
spinlock to synchronize updates to it from the same. Changed this to use a
per-CPU stats context instead.
This change will result in better performance.
patch2 (2/3):
Modified netronome nfp flower action to use VLAN helper functions instead
of accessing/referencing TC act_vlan private structures directly.
patch3 (3/3):
Using a spinlock in the VLAN action causes performance issues when the VLAN
action is used on multiple cores. Rewrote the VLAN action to use RCU read
locking for reads and updates instead.
All functions now use an RCU dereferenced pointer to access the VLAN action
context. Modified helper functions used by other modules, to use the RCU as
opposed to directly accessing the structure.
As part of this review, there were some changes suggested by reviewers.
I have incorporated all the changes that were requested.
Here're the changes:
v2: Fixed all helper functions to use RCU (rtnl_dereference) - Eric, Jamal
v2: Fixed indentation, extra line nits - Jamal, Jiri
v2: Moved rcu_head to the end of the struct - Jiri
v2: Re-formatted locals to reverse-christmas-tree - Jiri
v2: Removed mismatched spin_lock() - Cong
v2: Removed spin_lock_bh() in tcf_vlan_init, rtnl_dereference() should
suffice - Cong, Jiri
v4: Modified the nfp flower action code to use the VLAN helper functions
instead of referencing the structure directly. Isolated this into a
separate patch - Pieter Jansen
v5: Got rid of the unlikely() for the allocation case - Simon Horman
v6: Had forgotten cleanup functions for RCU alloc, added them - Dave Miller
v7: Re-formatted more locals to reverse-christmas-tree - Pieter V
v8: Reverted reverse-christmas-tree(v7), not required when dependencies
make it difficult to implement - Alexander D
v9: Cover letter subject change - Jamal
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Using a spinlock in the VLAN action causes performance issues when the VLAN
action is used on multiple cores. Rewrote the VLAN action to use RCU read
locking for reads and updates instead.
All functions now use an RCU dereferenced pointer to access the VLAN action
context. Modified helper functions used by other modules, to use the RCU as
opposed to directly accessing the structure.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Manish Kurup <manish.kurup@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modified netronome nfp flower action to use VLAN helper functions instead
of accessing/referencing TC act_vlan private structures directly.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Manish Kurup <manish.kurup@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VLAN action maintains one set of stats across all cores, and uses a
spinlock to synchronize updates to it from the same. Changed this to use a
per-CPU stats context instead.
This change will result in better performance.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Manish Kurup <manish.kurup@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 535a61777f ("sfc: suppress handled MCDI failures when changing the MAC address")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are several pointers that are being assigned but never read
so remove these as they are redundant. Also remove an assignment
to function_mode that is never read. Cleans up several clang
warnings:
vxge-main.c:1139:2: warning: Value stored to 'hldev' is never read
vxge-main.c:1294:2: warning: Value stored to 'hldev' is never read
vxge-main.c:2188:2: warning: Value stored to 'dev' is never read
vxge-main.c:2188:2: warning: Value stored to 'dev' is never read
vxge-main.c:2723:2: warning: Value stored to 'function_mode' is
never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
