If we try to perform a kexec when the machine is in ST (Single-Threaded) mode
(ppc64_cpu --smt=off), the kexec operation doesn't succeed properly, and we
get the following messages during boot:
[ 0.089866] POWER8 performance monitor hardware support registered
[ 0.089985] power8-pmu: PMAO restore workaround active.
[ 5.095419] Processor 1 is stuck.
[ 10.097933] Processor 2 is stuck.
[ 15.100480] Processor 3 is stuck.
[ 20.102982] Processor 4 is stuck.
[ 25.105489] Processor 5 is stuck.
[ 30.108005] Processor 6 is stuck.
[ 35.110518] Processor 7 is stuck.
[ 40.113369] Processor 9 is stuck.
[ 45.115879] Processor 10 is stuck.
[ 50.118389] Processor 11 is stuck.
[ 55.120904] Processor 12 is stuck.
[ 60.123425] Processor 13 is stuck.
[ 65.125970] Processor 14 is stuck.
[ 70.128495] Processor 15 is stuck.
[ 75.131316] Processor 17 is stuck.
Note that only the sibling threads are stuck, while the primary threads (0, 8,
16 etc) boot just fine. Looking closer at the previous step of kexec, we observe
that kexec tries to wakeup (bring online) the sibling threads of all the cores,
before performing kexec:
[ 9464.131231] Starting new kernel
[ 9464.148507] kexec: Waking offline cpu 1.
[ 9464.148552] kexec: Waking offline cpu 2.
[ 9464.148600] kexec: Waking offline cpu 3.
[ 9464.148636] kexec: Waking offline cpu 4.
[ 9464.148671] kexec: Waking offline cpu 5.
[ 9464.148708] kexec: Waking offline cpu 6.
[ 9464.148743] kexec: Waking offline cpu 7.
[ 9464.148779] kexec: Waking offline cpu 9.
[ 9464.148815] kexec: Waking offline cpu 10.
[ 9464.148851] kexec: Waking offline cpu 11.
[ 9464.148887] kexec: Waking offline cpu 12.
[ 9464.148922] kexec: Waking offline cpu 13.
[ 9464.148958] kexec: Waking offline cpu 14.
[ 9464.148994] kexec: Waking offline cpu 15.
[ 9464.149030] kexec: Waking offline cpu 17.
Instrumenting this piece of code revealed that the cpu_up() operation actually
fails with -EBUSY. Thus, only the primary threads of all the cores are online
during kexec, and hence this is a sure-shot receipe for disaster, as explained
in commit e8e5c2155b (powerpc/kexec: Fix orphaned offline CPUs across kexec),
as well as in the comment above wake_offline_cpus().
It turns out that cpu_up() was returning -EBUSY because the variable
'cpu_hotplug_disabled' was set to 1; and this disabling of CPU hotplug was done
by migrate_to_reboot_cpu() inside kernel_kexec().
Now, migrate_to_reboot_cpu() was originally written with the assumption that
any further code will not need to perform CPU hotplug, since we are anyway in
the reboot path. However, kexec is clearly not such a case, since we depend on
onlining CPUs, atleast on powerpc.
So re-enable cpu-hotplug after returning from migrate_to_reboot_cpu() in the
kexec path, to fix this regression in kexec on powerpc.
Also, wrap the cpu_up() in powerpc kexec code within a WARN_ON(), so that we
can catch such issues more easily in the future.
Fixes: c97102ba96 (kexec: migrate to reboot cpu)
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
There is still one residue of sysfs remaining: the sb_magic
SYSFS_MAGIC. However this should be kernfs user specific,
so this patch moves it out. Kerrnfs user should specify their
magic number while mouting.
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some systems the platform doesn't support neither
PM_SUSPEND_MEM nor PM_SUSPEND_STANDBY, so PM_SUSPEND_FREEZE is the
only available system sleep state. However, some user space frameworks
only use the "mem" and (sometimes) "standby" sleep state labels, so
the users of those systems need to modify user space in order to be
able to use system suspend at all and that is not always possible.
For this reason, add a new kernel command line argument,
relative_sleep_states, allowing the users of those systems to change
the way in which the kernel assigns labels to system sleep states.
Namely, for relative_sleep_states=1, the "mem", "standby" and "freeze"
labels will enumerate the available system sleem states from the
deepest to the shallowest, respectively, so that "mem" is always
present in /sys/power/state and the other state strings may or may
not be presend depending on what is supported by the platform.
Update system sleep states documentation to reflect this change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the observation that, for platform-dependent sleep states
(PM_SUSPEND_STANDBY, PM_SUSPEND_MEM), a given state is either
always supported or always unsupported and store that information
in pm_states[] instead of calling valid_state() every time we
need to check it.
Also do not use valid_state() for PM_SUSPEND_FREEZE, which is always
valid, and move the pm_test_level validity check for PM_SUSPEND_FREEZE
directly into enter_state().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To allow sleep states corresponding to the "mem", "standby" and
"freeze" lables to be different from the pm_states[] indexes of
those strings, introduce struct pm_sleep_state, consisting of
a string label and a state number, and turn pm_states[] into an
array of objects of that type.
This modification should not lead to any functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull scheduler fixes from Ingo Molnar:
"The biggest commit is an irqtime accounting loop latency fix, the rest
are misc fixes all over the place: deadline scheduling, docs, numa,
balancer and a bad to-idle latency fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/numa: Initialize newidle balance stats in sd_numa_init()
sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance()
sched: Skip double execution of pick_next_task_fair()
sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check
sched/deadline: Fix memory leak
sched/deadline: Fix sched_yield() behavior
sched: Sanitize irq accounting madness
sched/docbook: Fix 'make htmldocs' warnings caused by missing description
Pull perf fixes from Ingo Molnar:
"The biggest changes are fixes for races that kept triggering Trinity
crashes, plus liblockdep build fixes and smaller misc fixes.
The liblockdep bits in perf/urgent are a pull mistake - they should
have been in locking/urgent - but by the time I noticed other commits
were added and testing was done :-/ Sorry about that"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix a race between ring_buffer_detach() and ring_buffer_attach()
perf: Prevent false warning in perf_swevent_add
perf: Limit perf_event_attr::sample_period to 63 bits
tools/liblockdep: Remove all build files when doing make clean
tools/liblockdep: Build liblockdep from tools/Makefile
perf/x86/intel: Fix Silvermont's event constraints
perf: Fix perf_event_init_context()
perf: Fix race in removing an event
The resource map sanity check message is a bit confusing. Change it to be
more readable:
-resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01
+resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pull RCU updates from Paul E. McKenney:
" 1. Update RCU documentation. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/634.
2. Miscellaneous fixes. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/645.
3. Torture-test changes. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/667.
4. Variable-name renaming cleanup, sent separately due to conflicts.
This was posted to LKML at https://lkml.org/lkml/2014/5/13/854.
5. Patch to suppress RCU stall warnings while sysrq requests are
being processed. This patch is the RCU portions of the patch
that Rik posted to LKML at https://lkml.org/lkml/2014/4/29/457.
The reason for pushing this patch ahead instead of waiting until
3.17 is that the NMI-based stack traces are messing up sysrq
output, and in some cases also messing up the system as well."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Affine wakeups have the potential to interfere with NUMA placement.
If a task wakes up too many other tasks, affine wakeups will get
disabled.
However, regardless of how many other tasks it wakes up, it gets
re-enabled once a second, potentially interfering with NUMA
placement of other tasks.
By decaying wakee_wakes in half instead of zeroing it, we can avoid
that problem for some workloads.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: chegu_vinod@hp.com
Cc: umgwanakikbuti@gmail.com
Link: http://lkml.kernel.org/r/20140516001332.67f91af2@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Update the migrate_improves/degrades_locality() functions with
knowledge of pseudo-interleaving.
Do not consider moving tasks around within the set of group's active
nodes as improving or degrading locality. Instead, leave the load
balancer free to balance the load between a numa_group's active nodes.
Also, switch from the group/task_weight functions to the group/task_fault
functions. The "weight" functions involve a division, but both calls use
the same divisor, so there's no point in doing that from these functions.
On a 4 node (x10 core) system, performance of SPECjbb2005 seems
unaffected, though the number of migrations with 2 8-warehouse wide
instances seems to have almost halved, due to the scheduler running
each instance on a single node.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Link: http://lkml.kernel.org/r/20140515130306.61aae7db@cuia.bos.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the NUMA balancing code only allows moving tasks between NUMA
nodes when the load on both nodes is in balance. This breaks down when
the load was imbalanced to begin with.
Allow tasks to be moved between NUMA nodes if the imbalance is small,
or if the new imbalance is be smaller than the original one.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20140514132221.274b3463@annuminas.surriel.com
If the sched_clock time starts at a large value, the kernel will spin
in sched_avg_update for a long time while rq->age_stamp catches up
with rq->clock.
The comment in kernel/sched/clock.c says that there is no strict promise
that it starts at zero. So initialize rq->age_stamp when a cpu starts up
to avoid this.
I was seeing long delays on a simulator that didn't start the clock at
zero. This might also be an issue on reboots on processors that don't
re-initialize the timer to zero on reset, and when using kexec.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1399574859-11714-1-git-send-email-minyard@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sometimes ->nr_running may cross 2 but interrupt is not being
sent to rq's cpu. In this case we don't reenable the timer.
Looks like this may be the reason for rare unexpected effects,
if nohz is enabled.
Patch replaces all places of direct changing of nr_running
and makes add_nr_running() caring about crossing border.
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140508225830.2469.97461.stgit@localhost
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, in idle_balance(), we update rq->next_balance when we pull_tasks.
However, it is also important to update this in the !pulled_tasks case too.
When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed
using sd->busy_factor (so we increase the balance interval when the CPU is
busy). However, when the CPU goes idle, rq->next_balance could still be set
to a large value that was computed with the sd->busy_factor.
Thus, we need to also update rq->next_balance in idle_balance() in the cases
where !pulled_tasks too, so that rq->next_balance gets updated without taking
the busy_factor into account when the CPU is about to go idle.
This patch makes rq->next_balance get updated independently of whether or
not we pulled_task. Also, we add logic to ensure that we always traverse
at least 1 of the sched domains to get a proper next_balance value for
updating rq->next_balance.
Additionally, since load_balance() modifies the sd->balance_interval, we
need to re-obtain the sched domain's interval after the call to
load_balance() in rebalance_domains() before we update rq->next_balance.
This patch adds and uses 2 new helper functions, update_next_balance() and
get_sd_balance_interval() to update next_balance and obtain the sched
domain's balance_interval.
Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: daniel.lezcano@linaro.org
Cc: alex.shi@linaro.org
Cc: efault@gmx.de
Cc: vincent.guittot@linaro.org
Cc: morten.rasmussen@arm.com
Cc: aswin@hp.com
Link: http://lkml.kernel.org/r/1399596562.2200.7.camel@j-VirtualBox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to zero struct sched_group member cpumask and struct
sched_group_power member power since both structures are already allocated
as zeroed memory in __sdt_alloc().
This patch has been tested with
BUG_ON(!cpumask_empty(sched_group_cpus(sg))); and BUG_ON(sg->sgp->power);
in build_sched_groups() on ARM TC2 and INTEL i5 M520 platform including
CPU hotplug scenarios.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1398865178-12577-1-git-send-email-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jet Chen has reported a kernel panics when booting qemu-system-x86_64 with
kvm64 cpu. A panic occured while building the sched_domain.
In sched_init_numa, we create a new topology table in which both default
levels and numa levels are copied. The last row of the table must have a null
pointer in the mask field.
The current implementation doesn't add this last row in the computation of the
table size. So we add 1 row in the allocation size that will be used as the
last row of the table. The kzalloc will ensure that the mask field is NULL.
Reported-by: Jet Chen <jet.chen@intel.com>
Tested-by: Jet Chen <jet.chen@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: fengguang.wu@intel.com
Link: http://lkml.kernel.org/r/1399972261-25693-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On smaller systems, the top level sched domain will be an affine
domain, and select_idle_sibling is invoked for every SD_WAKE_AFFINE
wakeup. This seems to be working well.
On larger systems, with the node distance between far away NUMA nodes
being > RECLAIM_DISTANCE, select_idle_sibling is only called if the
waker and the wakee are on nodes less than RECLAIM_DISTANCE apart.
This patch leaves in place the policy of not pulling the task across
nodes on such systems, while fixing the issue that select_idle_sibling
is not called at all in certain circumstances.
The code will look for an idle CPU in the same CPU package as the
CPU where the task ran previously.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: morten.rasmussen@arm.com
Cc: george.mccollister@gmail.com
Cc: ktkhai@parallels.com
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Link: http://lkml.kernel.org/r/20140514114037.2d93266f@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Gotos are chained pointlessly here, and the 'out' label
can be dispensed with.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/536CEC29.9090503@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The logic in this function is a little contorted, clean it up:
* Rather than having chained gotos for the -EFBIG case, just
return -EFBIG directly.
* Now, the label 'out' is no longer needed, and 'ret' must be zero
zero by the time we fall through to this point, so just return 0.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/536CEC24.9080201@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
task_hot checks exec_start on any runnable task, but if it has been
migrated since the it last ran, then exec_start is a clock_task from
another cpu. If the old cpu's clock_task was sufficiently far ahead of
this cpu's then the task will not be considered for another migration
until it has run. Instead reset exec_start whenever a task is migrated,
since it is presumably no longer hot anyway.
Signed-off-by: Ben Segall <bsegall@google.com>
[ Made it compile. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140515225920.7179.13924.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lai found that:
WARNING: CPU: 1 PID: 13 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x2d/0x4b()
...
migration_cpu_stop+0x1d/0x22
was caused by set_cpus_allowed_ptr() assuming that cpu_active_mask is
always a sub-set of cpu_online_mask.
This isn't true since 5fbd036b55 ("sched: Cleanup cpu_active madness").
So set active and online at the same time to avoid this particular
problem.
Fixes: 5fbd036b55 ("sched: Cleanup cpu_active madness")
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael wang <wangyun@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/53758B12.8060609@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tejun reported that his resume was failing due to order-3 allocations
from sched_domain building.
Replace the NR_CPUS arrays in there with a dynamically allocated
array.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-7cysnkw1gik45r864t1nkudh@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tejun reported that his resume was failing due to order-3 allocations
from sched_domain building.
Replace the NR_CPUS arrays in there with a dynamically allocated
array.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-kat4gl1m5a6dwy6nzuqox45e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Michael Kerrisk noticed that creating SCHED_DEADLINE reservations
with certain parameters (e.g, a runtime of something near 2^64 ns)
can cause a system freeze for some amount of time.
The problem is that in the interface we have
u64 sched_runtime;
while internally we need to have a signed runtime (to cope with
budget overruns)
s64 runtime;
At the time we setup a new dl_entity we copy the first value in
the second. The cast turns out with negative values when
sched_runtime is too big, and this causes the scheduler to go crazy
right from the start.
Moreover, considering how we deal with deadlines wraparound
(s64)(a - b) < 0
we also have to restrict acceptable values for sched_{deadline,period}.
This patch fixes the thing checking that user parameters are always
below 2^63 ns (still large enough for everyone).
It also rewrites other conditions that we check, since in
__checkparam_dl we don't have to deal with deadline wraparounds
and what we have now erroneously fails when the difference between
values is too big.
Reported-by: Michael Kerrisk <mtk.manpages@gmail.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Dario Faggioli<raistlin@linux.it>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140513141131.20d944f81633ee937f256385@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The way we read POSIX one should only call sched_getparam() when
sched_getscheduler() returns either SCHED_FIFO or SCHED_RR.
Given that we currently return sched_param::sched_priority=0 for all
others, extend the same behaviour to SCHED_DEADLINE.
Requested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Dario Faggioli <raistlin@linux.it>
Cc: linux-man <linux-man@vger.kernel.org>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20140512205034.GH13467@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The scheduler uses policy=-1 to preserve the current policy state to
implement sys_sched_setparam(), this got exposed to userspace by
accident through sys_sched_setattr(), cure this.
Reported-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140509085311.GJ30445@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The documented[1] behavior of sched_attr() in the proposed man page text is:
sched_attr::size must be set to the size of the structure, as in
sizeof(struct sched_attr), if the provided structure is smaller
than the kernel structure, any additional fields are assumed
'0'. If the provided structure is larger than the kernel structure,
the kernel verifies all additional fields are '0' if not the
syscall will fail with -E2BIG.
As currently implemented, sched_copy_attr() returns -EFBIG for
for this case, but the logic in sys_sched_setattr() converts that
error to -EFAULT. This patch fixes the behavior.
[1] http://thread.gmane.org/gmane.linux.kernel/1615615/focus=1697760
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/536CEC17.9070903@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull more cgroup fixes from Tejun Heo:
"Three more patches to fix cgroup_freezer breakage due to the recent
cgroup internal locking changes - an operation cgroup_freezer was
using now requires sleepable context and cgroup_freezer was invoking
that while holding a spin lock. cgroup_freezer was using an overly
elaborate hierarchical locking scheme.
While it's possible to convert the hierarchical spinlocks directly to
mutexes, this patch simplifies the overall locking so that it uses a
global mutex. This has the added benefit of avoiding iterating
potentially huge number of tasks under a spinlock. While the patch is
on the larger side in the devel cycle, the changes made are mostly
straight-forward and the locking logic is a lot simpler afterwards"
* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix rcu_read_lock() leak in update_if_frozen()
cgroup_freezer: replace freezer->lock with freezer_mutex
cgroup: introduce task_css_is_root()
Pull timer fix from Thomas Gleixner:
"A single bug fix for a long standing issue:
- Updating the expiry value of a relative timer _after_ letting the
idle logic select a target cpu for the timer based on its stale
expiry value is outright stupid. Thanks to Viresh for spotting the
brainfart"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Set expiry time before switch_hrtimer_base()
The OPP code is an in kernel library selected by its users, there is no
no architecture code required to implement it and enabling it without a
user just increases the kernel size. Since the users select rather than
depend on it just remove the ability to directly set the option from
Kconfig.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some sysrq handlers can run for a long time, because they dump a lot
of data onto a serial console. Having RCU stall warnings pop up in
the middle of them only makes the problem worse.
This commit provides rcu_sysrq_start() and rcu_sysrq_end() APIs to
temporarily suppress RCU CPU stall warnings while a sysrq request is
handled.
Signed-off-by: Rik van Riel <riel@redhat.com>
[ paulmck: Fix TINY_RCU build error. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Alexander noticed that we use RCU iteration on rb->event_list but do
not use list_{add,del}_rcu() to add,remove entries to that list, nor
do we observe proper grace periods when re-using the entries.
Merge ring_buffer_detach() into ring_buffer_attach() such that
attaching to the NULL buffer is detaching.
Furthermore, ensure that between any 'detach' and 'attach' of the same
event we observe the required grace period, but only when strictly
required. In effect this means that only ioctl(.request =
PERF_EVENT_IOC_SET_OUTPUT) will wait for a grace period, while the
normal initial attach and final detach will not be delayed.
This patch should, I think, do the right thing under all
circumstances, the 'normal' cases all should never see the extra grace
period, but the two cases:
1) PERF_EVENT_IOC_SET_OUTPUT on an event which already has a
ring_buffer set, will now observe the required grace period between
removing itself from the old and attaching itself to the new buffer.
This case is 'simple' in that both buffers are present in
perf_event_set_output() one could think an unconditional
synchronize_rcu() would be sufficient; however...
2) an event that has a buffer attached, the buffer is destroyed
(munmap) and then the event is attached to a new/different buffer
using PERF_EVENT_IOC_SET_OUTPUT.
This case is more complex because the buffer destruction does:
ring_buffer_attach(.rb = NULL)
followed by the ioctl() doing:
ring_buffer_attach(.rb = foo);
and we still need to observe the grace period between these two
calls due to us reusing the event->rb_entry list_head.
In order to make 2 happen we use Paul's latest cond_synchronize_rcu()
call.
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140507123526.GD13658@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The perf cpu offline callback takes down all cpu context
events and releases swhash->swevent_hlist.
This could race with task context software event being just
scheduled on this cpu via perf_swevent_add while cpu hotplug
code already cleaned up event's data.
The race happens in the gap between the cpu notifier code
and the cpu being actually taken down. Note that only cpu
ctx events are terminated in the perf cpu hotplug code.
It's easily reproduced with:
$ perf record -e faults perf bench sched pipe
while putting one of the cpus offline:
# echo 0 > /sys/devices/system/cpu/cpu1/online
Console emits following warning:
WARNING: CPU: 1 PID: 2845 at kernel/events/core.c:5672 perf_swevent_add+0x18d/0x1a0()
Modules linked in:
CPU: 1 PID: 2845 Comm: sched-pipe Tainted: G W 3.14.0+ #256
Hardware name: Intel Corporation Montevina platform/To be filled by O.E.M., BIOS AMVACRB1.86C.0066.B00.0805070703 05/07/2008
0000000000000009 ffff880077233ab8 ffffffff81665a23 0000000000200005
0000000000000000 ffff880077233af8 ffffffff8104732c 0000000000000046
ffff88007467c800 0000000000000002 ffff88007a9cf2a0 0000000000000001
Call Trace:
[<ffffffff81665a23>] dump_stack+0x4f/0x7c
[<ffffffff8104732c>] warn_slowpath_common+0x8c/0xc0
[<ffffffff8104737a>] warn_slowpath_null+0x1a/0x20
[<ffffffff8110fb3d>] perf_swevent_add+0x18d/0x1a0
[<ffffffff811162ae>] event_sched_in.isra.75+0x9e/0x1f0
[<ffffffff8111646a>] group_sched_in+0x6a/0x1f0
[<ffffffff81083dd5>] ? sched_clock_local+0x25/0xa0
[<ffffffff811167e6>] ctx_sched_in+0x1f6/0x450
[<ffffffff8111757b>] perf_event_sched_in+0x6b/0xa0
[<ffffffff81117a4b>] perf_event_context_sched_in+0x7b/0xc0
[<ffffffff81117ece>] __perf_event_task_sched_in+0x43e/0x460
[<ffffffff81096f1e>] ? put_lock_stats.isra.18+0xe/0x30
[<ffffffff8107b3c8>] finish_task_switch+0xb8/0x100
[<ffffffff8166a7de>] __schedule+0x30e/0xad0
[<ffffffff81172dd2>] ? pipe_read+0x3e2/0x560
[<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
[<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
[<ffffffff8166b464>] preempt_schedule_irq+0x44/0x70
[<ffffffff816707f0>] retint_kernel+0x20/0x30
[<ffffffff8109e60a>] ? lockdep_sys_exit+0x1a/0x90
[<ffffffff812a4234>] lockdep_sys_exit_thunk+0x35/0x67
[<ffffffff81679321>] ? sysret_check+0x5/0x56
Fixing this by tracking the cpu hotplug state and displaying
the WARN only if current cpu is initialized properly.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: stable@vger.kernel.org
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1396861448-10097-1-git-send-email-jolsa@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Vince reported that using a large sample_period (one with bit 63 set)
results in wreckage since while the sample_period is fundamentally
unsigned (negative periods don't make sense) the way we implement
things very much rely on signed logic.
So limit sample_period to 63 bits to avoid tripping over this.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-p25fhunibl4y3qi0zuqmyf4b@git.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We happily allow userspace to declare a random kernel thread to be the
owner of a user space PI futex.
Found while analysing the fallout of Dave Jones syscall fuzzer.
We also should validate the thread group for private futexes and find
some fast way to validate whether the "alleged" owner has RW access on
the file which backs the SHM, but that's a separate issue.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Carlos ODonell <carlos@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20140512201701.194824402@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Dave Jones trinity syscall fuzzer exposed an issue in the deadlock
detection code of rtmutex:
http://lkml.kernel.org/r/20140429151655.GA14277@redhat.com
That underlying issue has been fixed with a patch to the rtmutex code,
but the futex code must not call into rtmutex in that case because
- it can detect that issue early
- it avoids a different and more complex fixup for backing out
If the user space variable got manipulated to 0x80000000 which means
no lock holder, but the waiters bit set and an active pi_state in the
kernel is found we can figure out the recursive locking issue by
looking at the pi_state owner. If that is the current task, then we
can safely return -EDEADLK.
The check should have been added in commit 59fa62451 (futex: Handle
futex_pi OWNER_DIED take over correctly) already, but I did not see
the above issue caused by user space manipulation back then.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Carlos ODonell <carlos@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20140512201701.097349971@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
In the original code "resume_delay" is an int so on 64 bits, the call to
kstrtoul() will cause memory corruption. We may as well fix a style
issue here as well and make "resume_delay" unsigned int, since that's
what we pass to ssleep().
Fixes: 317cf7e5e8 (PM / hibernate: convert simple_strtoul to kstrtoul)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "freeze" sleep state suffers from the same issue that was
addressed by commit ad07277e82 (ACPI / PM: Hold acpi_scan_lock over
system PM transitions) for ACPI sleep states, that is, things break
if ->remove() is called for devices whose system resume callbacks
haven't been executed yet.
It also can be addressed in the same way, by holding the ACPI scan
lock over the "freeze" sleep state and PM transitions to and from
that state, but ->begin() and ->end() platform operations for the
"freeze" sleep state are needed for this purpose.
This change has been tested on Acer Aspire S5 with Thunderbolt.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The variable and struct both having the name "rcu_state" confuses
sparse in some situations, so this commit changes the variable to
"rcu_state_p" in order to avoid this confusion. This also makes
things easier for human readers.
Signed-off-by: Uma Sharma <uma.sharma523@gmail.com>
[ paulmck: Changed the declaration and several additional uses. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The torture tests are designed to run in isolation, but do not enforce
this isolation. This commit therefore checks for concurrent torture
tests, and refuses to start new tests while old tests are running.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The locktorture module references CONFIG_LOCK_TORTURE_TEST_RUNNABLE,
which does not exist. Which is a good thing, because otherwise
randconfig testing could enable both rcutorture and locktorture
concurrently, which the torture tests are not set up for. This
commit therefore removes the reference, so that test is runnable
immediately only when inserted as a module.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
There are usually lots of readers and only one writer, so if there has
to be a choice, we would want rcu_torture_writer to win. This commit
therefore removes the set_user_nice() from rcu_torture_writer().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_torture_reader() function uses an on-stack timer_list structure
which it initializes with setup_timer_on_stack(). However, it fails to
use destroy_timer_on_stack() before exiting, which results in leaking a
tracking object if DEBUG_OBJECTS is enabled. This commit therefore
invokes destroy_timer_on_stack() to avoid this leakage.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The original rcu_torture_writer() avoided testing the synchronous
grace-period primitives because they were simply wrappers around
call_rcu() invocations. The testing of these synchronous primitives
was delegated to the fake writers. However, there really is no excuse
not to test them, especially in the case of SRCU, where the wrappering
is somewhat more elaborate. This commit therefore makes the default
rcutorture parameters cause rcu_torture_writer() to include synchronous
grace-period primitives in its testing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds rcutorture testing for get_state_synchronize_rcu()
and cond_synchronize_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The return value from torture_create_kthread() is currently ignored
when creating the rcu_torture_fqs kthread. This commit therefore
captures the return value so that it can be tested for errors.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In torture_shuffle_tasks function, the check if an all-zero mask can
be passed to set_cpus_allowed_ptr() is redundant after clearing the
shuffle_idle_cpu bit. If the mask had more than one bit set, after
clearing a bit it has at least one bit set. If the mask had only
one bit set, a check is made at the beginning, where the function
returns, as there is no need to shuffle only one cpu.
Also, this code is executed inside a critical section, delimited by
get_online_cpus(), and put_online_cpus(), preventing CPUs from leaving between
the check of num_online_cpus and the calls to set_cpus_allowed_ptr() function.
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_torture_reader() function currently uses schedule(). This commit
therefore speeds things up a bit by substituting cond_resched().
This change makes rcu_torture_reader() more CPU-bound, so this commit
also adjusts the number of readers (the "nreaders" module parameter,
which feeds into the "nrealreaders" variable) to allow one CPU to be
free of readers on SMP systems. The point of this is to increase the
probability that readers will be watching while an updater makes a change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Given a CPU running a loop containing cond_resched(), with no
other tasks runnable on that CPU, RCU will eventually report RCU
CPU stall warnings due to lack of quiescent states. Fortunately,
every call to cond_resched() is a perfectly good quiescent state.
Unfortunately, invoking rcu_note_context_switch() is a bit heavyweight
for cond_resched(), especially given the need to disable preemption,
and, for RCU-preempt, interrupts as well.
This commit therefore maintains a per-CPU counter that causes
cond_resched(), cond_resched_lock(), and cond_resched_softirq() to call
rcu_note_context_switch(), but only about once per 256 invocations.
This ratio was chosen in keeping with the relative time constants of
RCU grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit allows rcutorture to print additional state for the
RCU grace-period kthreads in cases where RCU seems reluctant to
start a new grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds a call to rcutorture_trace_dump() to dump the ftrace
buffer when the RCU grace period stalls in order to help debug the
stall. Note that this is different than the RCU CPU stall warning,
as it is rcutorture detecting the stall rather than the underlying RCU
implementation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, all stuttered kthreads block a jiffy at a time, which can
result in them starting at different times. (Note: This is not an
energy-efficiency problem unless you run torture tests in production,
in which case you have other problems!) This commit increases the
intensity of the restart event by causing kthreads to spin through the
last jiffy, restarting when they see the variable change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, torture_kthread_stopping() prints only the name of the
kthread that is stopping, which can be unedifying. This commit therefore
adds "Stopping" to make things more evident.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The srcu_torture_stats() function prints SRCU's per-CPU c[] array with
an unsigned format, which means that the number one less than zero is
a very large number. This commit therefore prints this array with a
signed format in order to improve readability of the rcutorture output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Mark functions as static in kernel/rcu/torture.c because they are not
used outside this file.
This eliminates the following warning in kernel/rcu/torture.c:
kernel/rcu/torture.c:902:6: warning: no previous prototype for ‘rcutorture_trace_dump’ [-Wmissing-prototypes]
kernel/rcu/torture.c:1572:6: warning: no previous prototype for ‘rcu_torture_barrier_cbf’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current lock_torture_writer() spends too much time sleeping and not
enough time hammering locks, as in an eight-CPU test will often only be
utilizing a CPU or two. This commit therefore makes lock_torture_writer()
sleep less and hammer more.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcutorture output currently does not distinguish between stalls in
the RCU implementation and stalls in the rcu_torture_writer() kthreads.
This commit therefore adds some diagnostics to help distinguish between
these two conditions, at least for the non-SRCU implementations. (SRCU
does not provide evidence of update-side forward progress by design.)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
While updating cgroup_freezer locking, 68fafb77d827 ("cgroup_freezer:
replace freezer->lock with freezer_mutex") introduced a bug in
update_if_frozen() where it returns with rcu_read_lock() held. Fix it
by adding rcu_read_unlock() before returning.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
After 96d365e0b8 ("cgroup: make css_set_lock a rwsem and rename it
to css_set_rwsem"), css task iterators requires sleepable context as
it may block on css_set_rwsem. I missed that cgroup_freezer was
iterating tasks under IRQ-safe spinlock freezer->lock. This leads to
errors like the following on freezer state reads and transitions.
BUG: sleeping function called from invalid context at /work
/os/work/kernel/locking/rwsem.c:20
in_atomic(): 0, irqs_disabled(): 0, pid: 462, name: bash
5 locks held by bash/462:
#0: (sb_writers#7){.+.+.+}, at: [<ffffffff811f0843>] vfs_write+0x1a3/0x1c0
#1: (&of->mutex){+.+.+.}, at: [<ffffffff8126d78b>] kernfs_fop_write+0xbb/0x170
#2: (s_active#70){.+.+.+}, at: [<ffffffff8126d793>] kernfs_fop_write+0xc3/0x170
#3: (freezer_mutex){+.+...}, at: [<ffffffff81135981>] freezer_write+0x61/0x1e0
#4: (rcu_read_lock){......}, at: [<ffffffff81135973>] freezer_write+0x53/0x1e0
Preemption disabled at:[<ffffffff81104404>] console_unlock+0x1e4/0x460
CPU: 3 PID: 462 Comm: bash Not tainted 3.15.0-rc1-work+ #10
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
ffff88000916a6d0 ffff88000e0a3da0 ffffffff81cf8c96 0000000000000000
ffff88000e0a3dc8 ffffffff810cf4f2 ffffffff82388040 ffff880013aaf740
0000000000000002 ffff88000e0a3de8 ffffffff81d05974 0000000000000246
Call Trace:
[<ffffffff81cf8c96>] dump_stack+0x4e/0x7a
[<ffffffff810cf4f2>] __might_sleep+0x162/0x260
[<ffffffff81d05974>] down_read+0x24/0x60
[<ffffffff81133e87>] css_task_iter_start+0x27/0x70
[<ffffffff8113584d>] freezer_apply_state+0x5d/0x130
[<ffffffff81135a16>] freezer_write+0xf6/0x1e0
[<ffffffff8112eb88>] cgroup_file_write+0xd8/0x230
[<ffffffff8126d7b7>] kernfs_fop_write+0xe7/0x170
[<ffffffff811f0756>] vfs_write+0xb6/0x1c0
[<ffffffff811f121d>] SyS_write+0x4d/0xc0
[<ffffffff81d08292>] system_call_fastpath+0x16/0x1b
freezer->lock used to be used in hot paths but that time is long gone
and there's no reason for the lock to be IRQ-safe spinlock or even
per-cgroup. In fact, given the fact that a cgroup may contain large
number of tasks, it's not a good idea to iterate over them while
holding IRQ-safe spinlock.
Let's simplify locking by replacing per-cgroup freezer->lock with
global freezer_mutex. This also makes the comments explaining the
intricacies of policy inheritance and the locking around it as the
states are protected by a common mutex.
The conversion is mostly straight-forward. The followings are worth
mentioning.
* freezer_css_online() no longer needs double locking.
* freezer_attach() now performs propagation simply while holding
freezer_mutex. update_if_frozen() race no longer exists and the
comment is removed.
* freezer_fork() now tests whether the task is in root cgroup using
the new task_css_is_root() without doing rcu_read_lock/unlock(). If
not, it grabs freezer_mutex and performs the operation.
* freezer_read() and freezer_change_state() grab freezer_mutex across
the whole operation and pin the css while iterating so that each
descendant processing happens in sleepable context.
Fixes: 96d365e0b8 ("cgroup: make css_set_lock a rwsem and rename it to css_set_rwsem")
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Determining the css of a task usually requires RCU read lock as that's
the only thing which keeps the returned css accessible till its
reference is acquired; however, testing whether a task belongs to the
root can be performed without dereferencing the returned css by
comparing the returned pointer against the root one in init_css_set[]
which never changes.
Implement task_css_is_root() which can be invoked in any context.
This will be used by the scheduled cgroup_freezer change.
v2: cgroup no longer supports modular controllers. No need to export
init_css_set. Pointed out by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Pull workqueue fixes from Tejun Heo:
"Fixes for two bugs in workqueue.
One is exiting with internal mutex held in a failure path of
wq_update_unbound_numa(). The other is a subtle and unlikely
use-after-possible-last-put in the rescuer logic. Both have been
around for quite some time now and are unlikely to have triggered
noticeably often. All patches are marked for -stable backport"
* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix a possible race condition between rescuer and pwq-release
workqueue: make rescuer_thread() empty wq->maydays list before exiting
workqueue: fix bugs in wq_update_unbound_numa() failure path
Pull cgroup fixes from Tejun Heo:
"During recent restructuring, device_cgroup unified config input check
and enforcement logic; unfortunately, it turned out to share too much.
Aristeu's patches fix the breakage and marked for -stable backport.
The other two patches are fallouts from kernfs conversion. The blkcg
change is temporary and will go away once kernfs internal locking gets
simplified (patches pending)"
* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
blkcg: use trylock on blkcg_pol_mutex in blkcg_reset_stats()
device_cgroup: check if exception removal is allowed
device_cgroup: fix the comment format for recently added functions
device_cgroup: rework device access check and exception checking
cgroup: fix the retry path of cgroup_mount()
Replace obsolete function.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 fixes from Peter Anvin:
"A somewhat unpleasantly large collection of small fixes. The big ones
are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'. It
was using __init functions with predictably suboptimal results.
Another key fix is a build fix which would produce output that simply
would not decompress correctly in some configuration, due to the
existing Makefiles picking up an unfortunate local label and mistaking
it for the global symbol _end.
Additional fixes include the handling of 64-bit numbers when setting
the vdso data page (a latent bug which became manifest when i386
started exporting a vdso with time functions), a fix to the new MSR
manipulation accessors which would cause features to not get properly
unblocked, a build fix for 32-bit userland, and a few new platform
quirks"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro
x86: Fix typo preventing msr_set/clear_bit from having an effect
x86/intel: Add quirk to disable HPET for the Baytrail platform
x86/hpet: Make boot_hpet_disable extern
x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
x86/reboot: Add reboot quirk for Certec BPC600
asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
asmlinkage, x86: Add explicit __visible to arch/x86/*
asmlinkage: Revert "lto: Make asmlinkage __visible"
x86, build: Don't get confused by local symbols
x86/efi: earlyprintk=efi,keep fix
The first is a long standing bug that causes bogus data to show up
in the refcnt field of the module_refcnt tracepoint. It was
introduced by a merge conflict resolution back in 2.6.35-rc days.
The result should be refcnt = incs - decs, but instead it did
refcnt = incs + decs.
The second fix is to a bug that was introduced in this merge window
that allowed for a tracepoint funcs pointer to be used after it
was freed. Moving the location of where the probes are released
solved the problem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTa/GQAAoJEKQekfcNnQGuGGUIAJCkrDZdnliE6f6Ur8aXJoX7
gjkXRMmCjLM/X8yQc1H8YwDbSgaTQNmeyQvBbBZ1hUQBaMf5ft4KuFYMGvQRk3jp
ZheQVumSzsQfO+yp5dRmzJ6H2G0BCInxq9VZyufZkCPUGsMyiIc+7+SGHEfjMgmW
9XFWyfSr09thVlGanr+OTLXfwFm7GMD9nohLKXh9dhi/tO/gHq6lI83HK42Y1bWG
4fZWJjO5GgCVbW4RanB6yr9RIe8NESKl37JYsAZX61iAvT8/mqIYGWx0i/DEGN5Q
ap3WW5QPALLUlvUVgI9Um0KOrotbmKtnRwPeHYDmSQODwuKj5veiLXxL9XdHPLU=
=lt0T
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains two fixes.
The first is a long standing bug that causes bogus data to show up in
the refcnt field of the module_refcnt tracepoint. It was introduced
by a merge conflict resolution back in 2.6.35-rc days.
The result should be 'refcnt = incs - decs', but instead it did
'refcnt = incs + decs'.
The second fix is to a bug that was introduced in this merge window
that allowed for a tracepoint funcs pointer to be used after it was
freed. Moving the location of where the probes are released solved
the problem"
* tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Fix use of tracepoint funcs after rcu free
trace: module: Maintain a valid user count
Commit de7b297390 "tracepoint: Use struct pointer instead of name hash
for reg/unreg tracepoints" introduces a use after free by calling
release_probes on the old struct tracepoint array before the newly
allocated array is published with rcu_assign_pointer. There is a race
window where tracepoints (RCU readers) can perform a
"use-after-grace-period-after-free", which shows up as a GPF in
stress-tests.
Link: http://lkml.kernel.org/r/53698021.5020108@oracle.com
Link: http://lkml.kernel.org/p/1399549669-25465-1-git-send-email-mathieu.desnoyers@efficios.com
Reported-by: Sasha Levin <sasha.levin@oracle.com>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Dave Jones <davej@redhat.com>
Fixes: de7b297390 "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints"
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The only value ever returned by cpuidle_idle_call() is 0 and its
only caller ignores that value anyway, so make it void.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4717784.WmVEpDoliM@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With the generic idle functions assuming !polling we should only clear
the polling bit at the very last opportunity in order to avoid
spurious IPIs.
Ideally we'd flip the default to polling, but that means auditing all
arch idle functions.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-vq7719foqzf6z5h4j7eh7f9e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because mwait_idle_with_hints() gets called from !idle context it must
call current_clr_polling(). This however means that resched_task() is
very likely to send an IPI even when we were polling:
CPU0 CPU1
if (current_set_polling_and_test())
goto out;
__monitor(&ti->flags);
if (!need_resched())
__mwait(eax, ecx);
set_tsk_need_resched(p);
smp_mb();
out:
current_clr_polling();
if (!tsk_is_polling(p))
smp_send_reschedule(cpu);
So while it is correct (extra IPIs aren't a problem, whereas a missed
IPI would be) it is a performance problem (for some).
Avoid this issue by using fetch_or() to atomically set NEED_RESCHED
and test if POLLING_NRFLAG is set.
Since a CPU stuck in mwait is unlikely to modify the flags word,
contention on the cmpxchg is unlikely and thus we should mostly
succeed in a single go.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-kf5suce6njh5xf5d3od13rr0@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of jumping through hoops to make sure to find (and exit) each
event, do it the simple straight fwd way.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tij931199thfkys8vbnokdpf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Primarily make perf_event_release_kernel() into put_event(), this will
allow kernel space to create per-task inherited events, and is safer
in general.
Also, document the free_event() assumptions.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rk9pvr6e1d0559lxstltbztc@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 38b435b16c ("perf: Fix tear-down of inherited group events")
states that we need to destroy groups for inherited events, but it
doesn't make any sense to not also destroy groups for normal events.
And while it usually makes no difference (the normal events won't
leak, and its very likely all the group events will die in quick
succession) it does make the code more consistent and closes a
potential hole for trouble.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-426egt8zmsm12d2q8k2xz4tt@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make sure all events in a group have the same inherit state. It was
possible for group leaders to have inherit set while sibling events
would not have inherit set.
In this case we'd still inherit the siblings, leading to some
non-fatal weirdness.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r32tt8yldvic3jlcghd3g35u@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It was found that when running some workloads (such as AIM7) on large
systems with many cores, CPUs do not remain idle for long. Thus, tasks
can wake/get enqueued while doing idle balancing.
In this patch, while traversing the domains in idle balance, in
addition to checking for pulled_task, we add an extra check for
this_rq->nr_running for determining if we should stop searching for
tasks to pull. If there are runnable tasks on this rq, then we will
stop traversing the domains. This reduces the chance that idle balance
delays a task from running.
This patch resulted in approximately a 6% performance improvement when
running a Java Server workload on an 8 socket machine.
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: daniel.lezcano@linaro.org
Cc: alex.shi@linaro.org
Cc: preeti@linux.vnet.ibm.com
Cc: efault@gmx.de
Cc: vincent.guittot@linaro.org
Cc: morten.rasmussen@arm.com
Cc: aswin@hp.com
Cc: chegu_vinod@hp.com
Link: http://lkml.kernel.org/r/1398303035-18255-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A new flag SD_SHARE_POWERDOMAIN is created to reflect whether groups of CPUs
in a sched_domain level can or not reach different power state. As an example,
the flag should be cleared at CPU level if groups of cores can be power gated
independently. This information can be used in the load balance decision or to
add load balancing level between group of CPUs that can power gate
independantly.
This flag is part of the topology flags that can be set by arch.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: schwidefsky@de.ibm.com
Cc: cmetcalf@tilera.com
Cc: benh@kernel.crashing.org
Cc: preeti@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1397209481-28542-5-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We replace the old way to configure the scheduler topology with a new method
which enables a platform to declare additionnal level (if needed).
We still have a default topology table definition that can be used by platform
that don't want more level than the SMT, MC, CPU and NUMA ones. This table can
be overwritten by an arch which either wants to add new level where a load
balance make sense like BOOK or powergating level or wants to change the flags
configuration of some levels.
For each level, we need a function pointer that returns cpumask for each cpu,
a function pointer that returns the flags for the level and a name. Only flags
that describe topology, can be set by an architecture. The current topology
flags are:
SD_SHARE_CPUPOWER
SD_SHARE_PKG_RESOURCES
SD_NUMA
SD_ASYM_PACKING
Then, each level must be a subset on the next one. The build sequence of the
sched_domain will take care of removing useless levels like those with 1 CPU
and those with the same CPU span and no more relevant information for
load balancing than its children.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux390@de.ibm.com
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/1397209481-28542-2-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Setting the numa_preferred_node for a task in task_numa_migrate
does nothing on a 2-node system. Either we migrate to the node
that already was our preferred node, or we stay where we were.
On a 4-node system, it can slightly decrease overhead, by not
calling the NUMA code as much. Since every node tends to be
directly connected to every other node, running on the wrong
node for a while does not do much damage.
However, on an 8 node system, there are far more bad nodes
than there are good ones, and pretending that a second choice
is actually the preferred node can greatly delay, or even
prevent, a workload from converging.
The only time we can safely pretend that a second choice
node is the preferred node is when the task is part of a
workload that spans multiple NUMA nodes.
Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Vinod Chegu <chegu_vinod@hp.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1397235629-16328-4-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When tasks have not converged on their preferred nodes yet, we want
to retry fairly often, to make sure we do not migrate a task's memory
to an undesirable location, only to have to move it again later.
This patch reduces the interval at which migration is retried,
when the task's numa_scan_period is small.
Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Vinod Chegu <chegu_vinod@hp.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1397235629-16328-3-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The NUMA code is smart enough to distribute the memory of workloads
that span multiple NUMA nodes across those NUMA nodes.
However, it still has a pretty high scan rate for such workloads,
because any memory that is left on a node other than the node of
the CPU that faulted on the memory is counted as non-local, which
causes the scan rate to go up.
Counting the memory on any node where the task's numa group is
actively running as local, allows the scan rate to slow down
once the application is settled in.
This should reduce the overhead of the automatic NUMA placement
code, when a workload spans multiple NUMA nodes.
Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Vinod Chegu <chegu_vinod@hp.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1397235629-16328-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
e5fc66119e ("sched: Fix race in idle_balance()")
can potentially cause rq->max_idle_balance_cost to not be updated,
even when load_balance(NEWLY_IDLE) is attempted and the per-sd
max cost value is updated.
Preeti noticed a similar issue with updating rq->next_balance.
In this patch, we fix this by making sure we still check/update those values
even if a task gets enqueued while browsing the domains.
Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: morten.rasmussen@arm.com
Cc: aswin@hp.com
Cc: daniel.lezcano@linaro.org
Cc: alex.shi@linaro.org
Cc: efault@gmx.de
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1398725155-7591-2-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
